On Mon, 12 Mar 2007, wispa wrote:
There is a specific data format, called LAES, which is an acronym
for something or other.
LAES is a delivery protocol, not data format.
As best I can tell, this format costs a license fee if you wish to
program something to use it. Thus, NO OPEN SOURCE IS P
On Mon, 12 Mar 2007, Rick Smith wrote:
Is there anywhere online that actually states WHAT we will need to
provide ?
I.e. data format, etc. - It was my impression that this was still
"under discussion" at the FBI...
The exact format and method of delivery has not been decided. There
are s
I also use Temflex and Super33, and I have only had one connector leak,
and that was the customers fault for try to move the antenna for better
signal, LOL!.
Dave Hulsebus wrote:
Are you talking about grid antennas? I have had issues,multiple
brands, leaching water through the dipole down i
Are you talking about grid antennas? I have had issues,multiple brands,
leaching water through the dipole down into the connectors. We turned
the cables up and mounted radios above the antennas to resolve that
problem.
I use a rubber splicing tape like 3M Temflex first then a layer of
mastic
FYI, I only use GeoCel on roofs and mast mounts, NOT radio connectors. ;-)
Brian Rohrbacher wrote:
Check out this.
http://www.dslreports.com/speak/slideshow/14670691?c=914265&ret=L2ZvcnVtL3JlbWFyaywxNDY1MTI2Mn5kYXlzPTk5OTl%2Bc3RhcnQ9MjA%3D
The product I prefer for the conformal sealing in
I'm sure you've already checked all the numbers, but even with LMR900 at
5.8ghz there can be a great deal of loss:
LMR-600 going 100ft at 5.8ghz = 8db of loss
LMR-900 going 100ft at 5.8ghz = 6db of loss
We have switched some of our backhaul links to this same setup (radio
inside, LMR-400 cable
There are a lot of places that sell it... I buy it from Electrocomm in
the large rolls. I think it's 1/2" wide by 12ft long for $7 each... we
use about 6 inches per seal... so that's 24 seals for roughly $.30 each.
Here is the actual website: http://www.coaxseal.com
They have a list of distrib
Marlon,
Now thats a good explanation of how to do waterproofing correctly, that you
made.
The secret to good waterproofing is the right amount of stretch of the
Mastic tape. Its the stretch that allows the tape to optimally bond to its
surface and fill the gaps. Just pushing the goop in plac
Yep, that is where I want head. Where do you get your cables?
Mario Pommier wrote:
Smart move!!!
When at all possible, we do that: active elements inside, inactive
antenna outside.
Design your grounding properly (NOT A MINOR ACHIEVEMENT!!!) and
you're set: EVERYTHING goes to 1 common groun
Smart move!!!
When at all possible, we do that: active elements inside, inactive
antenna outside.
Design your grounding properly (NOT A MINOR ACHIEVEMENT!!!) and
you're set: EVERYTHING goes to 1 common ground, coax lightning kits
(outdoors) and in line lightning arrestors (indoors) go to di
Where do you get it?
Mario
Blair Davis wrote:
Same here. Coax Seal is GREAT!!!
Travis Johnson wrote:
We started using Coax-Seal about two years ago and have never had a
problem since. It's moldable so you wrap the connector and then form
it around the connections. Quick, easy and chea
Scott Reed wrote:
Who supplies pre-terminated (N connectors) cables in the 70 to 150'
range using LMR 600, LMR900 and/or Heliax? Looking to move radios to
the bottom of towers.
You can buy them preterminated from electro-comm.com
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubs
Who supplies pre-terminated (N connectors) cables in the 70 to 150'
range using LMR 600, LMR900 and/or Heliax? Looking to move radios to
the bottom of towers.
--
Scott Reed
Owner
NewWays
Wireless Networking
Network Design, Installation and Administration
www.nwwnet.net
--
WISPA Wireless List:
Does anyone have any experience using Tranzeo's WDS to "extend" the reach of an
AP? I'm using a TR6000 in bridge mode and would like extend my reach to
another neighborhood!
Still have space on the T1 and the customers keep coming! Thanks to everyone
for your help!
Jim
Jim Stout
LTO C
As I stated earlier I appreciate everyone's ideas but last I checked I
run my own business. Everyone can do their business however they wish. I
do not consider the fiber connection I have to be the weak point in my
network. There are several points of failure in an ISP including your
system I a
Just a couple quick points...
You mentioned you are 75 miles from the nearest telco-hotel. We are 200
miles from the nearest telco POP. There are ways to be redundant in
these rural markets without it costing you a fortune.
Next, being multi-homed is different than a redundant links to towers
Same here. Coax Seal is GREAT!!!
Travis Johnson wrote:
We started using Coax-Seal about two years ago and have never had a
problem since. It's moldable so you wrap the connector and then form
it around the connections. Quick, easy and cheap. Even on mountaintops
at 9000ft elevation with
Having a 4xT as a backup is better than no connection.
John
John Scrivner wrote:
Maybe it is very costly to do? Charter Pipeline service in my market
is not multi-homed either. Neither am I at this point. I used to be
multi-homed in the days when 2 T1s did the job. It is not easy to
swing
Marlon K. Schafer (509) 982-2181 wrote:
I tried using silicone on the connectors but that eventually shrinks
and there's something in it that corrodes the connectors. Bad idea.
Acetic Acid (aka vinegar) is the byproduct of the curing process.
--
WISPA Wireless List: wireless@wispa.org
Sub
Matt,
Charter Pipeline in this market is not multi-homed. It costs me about
$40K per year to be multi-homed. I do not see it as a necessity. That is
MY opinion. It costs Joe User about $40 per month more to be
multi-homed in my market. It is what I suggest to anyone who says they
depend on th
Makes me happy to live in the USA
Jeff Broadwick wrote:
I suppose it could be worse...this was a customer that we know from
Honduras:
http://www.bayislandsvoice.com/issue-v5-2.htm
At least Level3 didn't come in with guns...
Jeff
-Original Message-
From: [EMAIL PROTECTED] [mailto:
Does that stuff come off if/when you need to remove it?
I always use the manufacturer's recommendation:
http://www.timesmicrowave.com/connectors/hdw_install.shtml
-RickG
On 3/16/07, Brian Rohrbacher <[EMAIL PROTECTED]> wrote:
Check out this.
http://www.dslreports.com/speak/slideshow/14670691?c=
I suppose it could be worse...this was a customer that we know from
Honduras:
http://www.bayislandsvoice.com/issue-v5-2.htm
At least Level3 didn't come in with guns...
Jeff
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of George Rogato
Sent: Friday, Ma
Yeppers. The only things I'd have done differently is a little further down
on the coax and a higher quality black tape. Something that would have laid
down nicer.
Nice work!
Marlon
(509) 982-2181
(408) 907-6910 (Vonage)Consulting services
42846865 (icq)
When it's cold out keep the tape inside your shirt. Right against your
body.
Marlon
(509) 982-2181
(408) 907-6910 (Vonage)Consulting services
42846865 (icq)WISP Operator since 1999!
[EMAIL PROTECTED]
www.odessaoffice.com/wireless
www.odess
See: http://www.kenwoodtelecom.com/
Part number W9310KT contains 6 rolls of the mastic, 2 rolls of premium grade
3/4" tape and 1 roll of premium 2" tape, for about $16.00.
Edward J. Hatfield III, President
E.J. Hatfield & Company
5142 Edgemoor Drive
Norcross, GA 30071-4342 USA
1-770-209-9236 - O
Peter R. wrote:
Two, I am pretty sure that there is more to this story than what was
written.
And if Said Inc. was talking to L3 Security as often as implied, it
would seem they had some issues that they did not want to own up to.
- Peter
Me too, I caught the , web hosting, adult sites, and
lol...exactly.
It is fun (sometimes) when confronted by the "IT guy" that claims they have
zero tolerance for downtime.
We say ok, you need to place your operation inside a telco hotel or you'll
need to bring in power from two separate grids, build out fully redundant
HVAC, fire suppression,
One, business sense when you getting E-Rate $, is to be multi-homed,
even if only to cover half of the E-rate bandwidth.
Two, I am pretty sure that there is more to this story than what was
written.
And if Said Inc. was talking to L3 Security as often as implied, it
would seem they had some is
Matt Liotta wrote:
George Rogato wrote:
You know, this really is the answer. Two different isp's
I've had the customers over the years, that want 10- 9's because
their business depends upon the internet, but then they don't want to
pay an extra 30 - 40.00 per month to get it.
So you would r
George Rogato wrote:
You know, this really is the answer. Two different isp's
I've had the customers over the years, that want 10- 9's because
their business depends upon the internet, but then they don't want to
pay an extra 30 - 40.00 per month to get it.
So you would recommend to your cus
You know, this really is the answer. Two different isp's
I've had the customers over the years, that want 10- 9's because
their business depends upon the internet, but then they don't want to
pay an extra 30 - 40.00 per month to get it.
John Scrivner wrote:
I tell them the fiber is down. I
Unfortunatly not.
There are mountains and 60 miles between us and them and it's Qwest
territory anyways.
Jeff Broadwick wrote:
Can you do a microwave shot from another town/provider?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of George Rogato
Sen
*grin* The "some success" part was because they could yet fail, and I
haven't
used a lot of them. maybe 5 or 6. I have some out for a couple of years now,
and have yet to have one fail, but I sure wouldn't want to bet my entire
business
case on them, or any other splice method either. :)
John
I can't imagine you would go broke. I seem to recall that you aren't but
a couple of radio shots away from cheap bandwidth in St. Louis.
Certainly, a couple of long range high throughput radios wouldn't make
you go broke.
-Matt
John Scrivner wrote:
I tell them the fiber is down. I guess I cou
Radio Shack, two bucks, just use the female to female and seal it like you
would coax.
Forbes
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Travis Johnson
Sent: Friday, March 16, 2007 10:44 AM
To: isp-wireless@isp-wireless.com; WISPA General List
Subje
"some success" :)
They have leaked for me. If I have to splice I try to do it inside at
point of entry with a coupler or keystone jack. If it has to be done
outside I use these..
http://www.shop.com/op/~PETRA_300_071_UY_Gel_Splice_Connector_2_Port-prod-30304739-39574282?sourceid=3
and mas
Tom DeReggi wrote:
It does make you wonder why the ISP in question wasn't multi-homed.
Although, I recognize being multi-homed would have protected the WISP
in this situation... That is not really the issue.
The issue is that Businesses often build strategic partnerships, and
togeather they
I have used these with some success.
http://www.alliedelec.com/Search/ProductDetail.asp?SKU=565-0107&R=565%2D0107&sid=45F9DE0075EFE17F
John
Travis Johnson wrote:
>
> Hi,
>
> We sometimes have to move people's radios because of tree growth,
> changing towers, etc. The biggest pain is having to re
In the event we need to extend a CAT5 cable we use the 3M UY connectors.
Keep the twist of each wire as close as possible and then tape, Coax-Seal
and more tape. We've never had a problem with this method...knock on wood.
Best,
Brad
-Original Message-
From: [EMAIL PROTECTED] [mailto:[
Well, kind of... it's more like a soft rubbery compound. You can mold it
into any shape and it's very easy to work with... the only problem is
getting it back off when the temp is below zero... that takes a little
work... ;)
Travis
Microserv
Brian Rohrbacher wrote:
I have never seen the stuff
I have never seen the stuff, but by looking it up, it looks like it is
kind of like clay. It that true? Is it moldable like clay?
Brian
Travis Johnson wrote:
We started using Coax-Seal about two years ago and have never had a
problem since. It's moldable so you wrap the connector and then fo
Hi,
We sometimes have to move people's radios because of tree growth,
changing towers, etc. The biggest pain is having to re-run the CAT5
cable because it won't reach. Has anyone ever seen some type of outdoor
coupler or even something you could put around a normal coupler and just
extend the
Brian Rohrbacher wrote:
Tom DeReggi wrote:
I'm going to have to argue with you guys
That's easy.
http://www.dslreports.com/speak/slideshow/14670691?c=914265&ret=L2ZvcnVtL3JlbWFyaywxNDY1MTI2Mn5kYXlzPTk5OTl%2Bc3RhcnQ9MjA%3D
Oh, one more thing, I stop the reversed layer at the connector
We started using Coax-Seal about two years ago and have never had a
problem since. It's moldable so you wrap the connector and then form it
around the connections. Quick, easy and cheap. Even on mountaintops at
9000ft elevation with 60mph winds and freezing rain/ice we have never
had a problem.
Tom DeReggi wrote:
I'm going to have to argue with you guys
That's easy.
http://www.dslreports.com/speak/slideshow/14670691?c=914265&ret=L2ZvcnVtL3JlbWFyaywxNDY1MTI2Mn5kYXlzPTk5OTl%2Bc3RhcnQ9MjA%3D
Se how each layer comes down a little bit further? This method has
worked great through
Check out this.
http://www.dslreports.com/speak/slideshow/14670691?c=914265&ret=L2ZvcnVtL3JlbWFyaywxNDY1MTI2Mn5kYXlzPTk5OTl%2Bc3RhcnQ9MjA%3D
The product I prefer for the conformal sealing in the pic is...
http://www.sashcosealants.com/home_improvement/products/lexel.shtml
Read the specs on that
I tell them the fiber is down. I guess I could go broke trying to be
more fault tolerant. Please understand I appreciate your feedback but
understand that my service area does not have a single fault tolerant
broadband solution. If people want fault tolerance here then the option
is to buy two
sigh
Larsen, when can you and I hook up and do a video of the RIGHT way to
weather seal? hehehehe
First, John, I'm gonna assume that your guys know nothing so please take no
offence.
The FIRST and MOST important step in a good water seal is the antenna! Jer
would be quick to remind m
Tape, Mastic, Tape. Watch the way the cell guys do it. They don't get fancy.
Make sure your wraps are good. Electricians are actually taught how to wrap
tape properly. We have some mastic from the local HVAC guys. Real easy to
work with and it very pliable.
Make sure to push the mastic in to the l
This is not something that is following a certain antenna type. It has
more to do with the weather sealing technique than anything I think. I
believe that the best practices for this are becoming clear from
feedback we are seeing here and I sure appreciate everyone's feedback on
this.
Maybe w
Thanks very much Tom.
That is a very interesting subject indeed:
I think you have a very good insight on the current broadband/gigabit
marketplace, a very well written piece.
MMW is currently "high price - low volume" and there are far fewer MMW
deployments than FSO in the world so far AFAIK.
Par
John
Site pro 1 has really great pricing for weatherproofing kits
www.sitepro1.com
Bob
Sent from my Verizon Wireless BlackBerry
-Original Message-
From: John Scrivner <[EMAIL PROTECTED]>
Date: Fri, 16 Mar 2007 11:48:13
To:wireless@wispa.org
Subject: [WISPA] Many thanks
I appreciate
I appreciate all the feedback on the moisture from all of you. I was not
sure the proper way as I always used a completely different method in my
CATV days. Our hard line was sealed with an adhesive lined heat shrink
tubing. I actually saw water get into those connections too though so I
was cu
Super33 or Super88 - Mastic - Super33 or Super88
This is how it should be done - this is how carriers do it, this is how
old time ham operators do it Period !
Try to re-invent the wheel is asking for trouble
Tape from the bottom to the top to form "shingles"
JohnnyO
-Original Me
not if you squeeze the mastic up over the nut close to the antenna N
connector, and over the ends of the tape near the heat wrap...then it's
sealing off the courtesy wrap inside...
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Tom DeReggi
Sent: Friday,
I'm going to have to argue with you guys
The purpose of the Mastic tape is that it creates a bond that fills the
nooks and cranties of the item that you are waterproofing. So that if the
Super88 leaks, it can't get to the connector.
The two biggest places water gets into the connection is t
Can you do a microwave shot from another town/provider?
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of George Rogato
Sent: Friday, March 16, 2007 12:06 PM
To: WISPA General List
Subject: Re: [WISPA] anyone see this?
See now that is the issue around here
It does make you wonder why the ISP in question wasn't multi-homed.
Although, I recognize being multi-homed would have protected the WISP in
this situation... That is not really the issue.
The issue is that Businesses often build strategic partnerships, and
togeather they grow. There is oft
See now that is the issue around here.
If we want true redundancy we need to ride two different fibers out of
town. One is the fiber we are already on, and the other is the expensive
guys Qwest.
We hate to give Qwest a dime.
Matt Liotta wrote:
Sure it is more costly than being single-homed,
I wonder how much a set of Plaintree WBLS100 are?
100megs full duplex would do the trick for me. I'm only going across the
street 100 yards or so. Twice. I need two sets of PtP links.
George
Marlon K. Schafer (509) 982-2181 wrote:
As far as I know, both are very good units.
I know that some
Sure it is more costly than being single-homed, but being multi-homed is
pretty important. If your single provider goes down what do you tell
your customers?
-Matt
John Scrivner wrote:
Maybe it is very costly to do? Charter Pipeline service in my market
is not multi-homed either. Neither am I
Any particular type of antenna this is happening to?
John Scrivner wrote:
Thanks Rick. I will pass this along to our techs so they can start
implementing this. I know they seal the heck out of things and it is
really bizarre to me how any water is getting in there but it is. If
they have ques
Forgot to mention a side benefit do doing it this way is that I don't have
to deal with mastic if I need to swap something out in the future. Usually I
can unwrap the connection with little trouble, otherwise I slit it with a
razor knife then peal it of nice and clean.
Chadd
> -Original Messa
nod, WTF! :)
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of JohnnyO
Sent: Friday, March 16, 2007 11:47 AM
To: 'WISPA General List'
Subject: RE: [WISPA] Moisture Ingress
I taught Rick this after he learned the hard way ! ;)
CampWTF for life !
JohnnyO
I taught Rick this after he learned the hard way ! ;)
CampWTF for life !
JohnnyO
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of John Scrivner
Sent: Friday, March 16, 2007 10:43 AM
To: WISPA General List
Subject: Re: [WISPA] Moisture Ingress
Thanks Ric
Scriv,
I use the tape-tape-tape method. First I wrap the connection very
tight with a high quality electrical tape like 3M super88, then I wrap a
layer of self sealing rubber tape "3M brand also", then a final layer of 3M
super88. You need to make sure your wraps are tight. Also make sure
Thanks Rick. I will pass this along to our techs so they can start
implementing this. I know they seal the heck out of things and it is
really bizarre to me how any water is getting in there but it is. If
they have questions about your process they may be contacting you directly.
Many thanks,
Stephen,
Excellent post.
I agree that every product has it's place.
The industry is lucky to have so many options to choose from. The negative
side is the options are often still expensive (perception of expense is
relative :-)
The reasons, is vendors put a value on their product based on the
Maybe it is very costly to do? Charter Pipeline service in my market is
not multi-homed either. Neither am I at this point. I used to be
multi-homed in the days when 2 T1s did the job. It is not easy to swing
redundant fiber runs in a town that is 75 miles from the nearest
telco-hotel. When I g
As most of you know, Congress in a misguided effort to save us energy money,
moved daylight savings time back 3 weeks from its original date.
Unfortunately for windoze, an update needs to be downloaded. You can get it
at http://windowsupdate.microsoft.com. The reason some people have the
download
We are just reverse taping on the connectors, then mastic just past the
connector and its rubber seal, then taping it up on the outside tighter on
the N connector end to make sure it squeezes the mastic to the radio no
problems yet...
- Original Message -
From: "John Scrivner" <[
I'd not think so. L3 is doing this in other places as well.
Sometimes we're too fast to look for ways to be offended :-).
Marlon
(509) 982-2181
(408) 907-6910 (Vonage)Consulting services
42846865 (icq)WISP Operator since 1999!
[EMAIL PROTE
The fact that there are now NOW isp's in that area means that this wasn't an
option.
We're on some l3 systems too. I've been told that they have a habit of just
dropping locations.
They are the ONLY facility in that area now that I shut down my lines and
moved to them. I'm debating a move
As far as I know, both are very good units.
I know that some of the older plaintree gear had flaky tx/rx units that
weren't aligned right at the factory. But I've sold a little bit of their
stuff over the years and I don't remember any complaints. Other than the
sheer size of the units, fso
Scriv,
We always do the same thing and we have never had water issues. It is a
simple way that a local HAM guy taught me.
1. Hand tighten the coax to the antenna
2. Wrap with 3M electric tape from bottom of fitting/heat shrink up to the
base of the antenna (in that direction as it acts like sh
Mine has been right all along. Never changed a thing either.
I'm guessing there's an update that you guys don't have?
Marlon
(509) 982-2181 Equipment sales
(408) 907-6910 (Vonage)Consulting services
42846865 (icq)
Scotch Super 33 tape over the connectors, right close as you can get to the
antenna, all the way down the lmr past where the "rubber joint" is - then
mastic over that - then 33 again over the mastic.
This is called a courtesy wrap, cause if you ever have to open it back up,
you slice down to the
I would like a bit of feedback from those of you who have been
installing outdoor antennas for a while. I have a problem that I would
like to see fixed. It seems that after every long rain we see problems
with the occasional connection outside at the antenna getting water into
it. We use the Sc
I just wanted to say "WELCOME ABOARD" to all of the new principle WISPA
members. It is good to see all of you here as we can all benefit from one
another and the industry as a whole can be advanced due to all us being a
member here. I already see things that have happened for our betterment due
SAID is an arabic surname, we probably have another dimention to this that has
not been explored yet. Could it be discrimination? or DHS?
> Date: Thu, 15 Mar 2007 21:39:26 -0400> From: [EMAIL PROTECTED]> To:
> wireless@wispa.org> Subject: Re: [WISPA] anyone see this?> > Thank The good
> Lord
Harnish, I can honestly say that I have never bought a single tube of any
brand of bu++ paste.
CAN YOU? :-)
I do own a big yellow tube of unopened Boudreaux's that I see every day in
one of my drawers in my bathroom. Every time I see it - - I think of you
and it has formed a correlation to
sometimes good things take a while to happen, but they do.
it's a solacing idea.
it's good to be here, Marlon.
Mario
Marlon K. Schafer wrote:
Finally! grin
Good to have you on the team Mario
marlon
- Original Message - From: "John Scrivner" <[EMAIL PROTECTED]>
To: "WISPA General List
It does make you wonder why the ISP in question wasn't multi-homed.
-Matt
Tim Wolfe wrote:
Thank The good Lord above that I never signed the TelCove contract for
bandwidth last year!. I mean, you really have no idea what the local
provider was doing wrong, but to turn off a school district and
Dear all,
We're an FSO vendor - as well as our other radio and micrwoave products.
Actually I feel we should pitch in on the LEDs vs lasers - a topic we know
very well:
- LEDs are limited in power and bandwidth (more than 50Mbps at reasonable
power is a real problem for the raw LED devices)
- LEDs
Whats the reliability factor?
I've been thinking of adding fso for a couple links now for a couple years.
Now I could put 100megs duplex to use rather than waste the spectrum.
But how well does this stuff stand up?
Haven't heard much about anyones experiences good or bad.
is it 6 9's?
does the
86 matches
Mail list logo