Re: [Elphel-support] Ordering stereo camera

Hello Elham, As I wrote you earlier - we do not have any waterproof camera, the only weatherproof (they withstand rain but can not go underwater) we manufacture is Eyesis4pi (it is more expensive device). Our users were able to use Elphel cameras deep under water (see project SCINI

Re: [Elphel-support] sensor board, informations

Hello Julie, I'm afraid we can not help you with the sensor boards compatible with Raspberry Pi - our sensor boards are only compatible with the earlier Elphel cameras, designed more than 10 years ago. All our sensor boars use the 30-conductor flex cables - we can use both standard 0.5 mm

Re: [Elphel-support] Software questions.

All the software that is needed to run camera in linescan mode is in the camera itself, as all the source code of the programs. Development environment (the NC353 camera uses discontinued Axis ETRAX processor that requires older versions of GNU/Linux) is provided on a bootable flash drive. You

Re: [Elphel-support] Ordering stereo camera

Elpham, Using dual 2-lens system does not give you any advantage compared to two separate systems, and for research project I would rather use 2 separate, for simplicity. You know that there are many ways to process multi-view images, most use feature extraction and keypoints before

Re: [Elphel-support] Camera Shipping

Hello Elham, It does not matter - where do we ship the camera that is made for you. It can be local in the US, in Europe or directly in Iran - it is still our responsibility to comply with the export regulations. We applied for an export license to Iran and hope we will receive it, we think

Re: [Elphel-support] Global Reset Release

Hello Asa, How do you plan to use global reset release? It is not a global shutter (all pixels erased at once, but read out of the full frame still takes ~1/15 s) Do you plan to connect a flash light source? Otherwise the pixel exposure will be proportional to row number. It is possible to

Re: [Elphel-support] Global Reset Release

t always 1/15s? No matter what the exposure setup?We can try it with the 5mp for now. On Wed, Sep 21, 2016 at 6:53 PM, Elphel Support support-list@support.elphel.com wrote: Hello Asa, How do you plan to use global reset release? It is not a global shutter (all pixels erased at once, bu

Re: [Elphel-support] Camera Shipping

ions, what is maximum disparity range (in pixel). becouse this affect minimum depth and camera baseline(and focal length). Best Regards Elham On Wednesday, September 21, 2016 1:39 AM, Elphel Support support-list@support.elphel.com wrote: Elham, We can ship to any of these countri

Re: [Elphel-support] Global Reset Release

21, 2016 at 6:53 PM, Elphel Support support-list@support.elphel.com wrote: Hello Asa, How do you plan to use global reset release? It is not a global shutter (all pixels erased at once, but read out of the full frame still takes ~1/15 s) Do you plan to connect a flash light source? Otherwis

Re: [Elphel-support] Camera Shipping

Dear Andrey , Thank you for providing the requested information. how about Malaysia or Dubai ? how long does it take to ship it to these countries? Best Regards Elham On Monday, September 19, 2016 9:32 AM, Elphel Support support-list@support.elphel.com wrote: Elham, The fastest

Re: [Elphel-support] Schematic/pcb design for 10393 Board

Dan, Thank you for the nice words. https://wiki.elphel.com/wiki/10393#More_details - links are under the block diagram You may also find STEP files for all the mechanical parts there, you may start from the https://wiki.elphel.com/index.php?title=Elphel_camera_assemblies Andrey On

Re: [Elphel-support] Record full res and stream compressed at the same time?

David, Do you mean resolution or JPEG quality? Different JPEG quality can be achieved with the same FPGA code, but different software if you use less that all 4 channels - run 2 compressors from the same sensor channel. Different resolution simultaneously can only be achieved if the sensor

Re: [Elphel-support] Record full res and stream compressed at the same time?

. Thanks! David On Sun, Jul 23, 2017 at 8:47 PM Elphel Support support-list@support.elphel.com wrote: David, That will need modification of the drivers - ( https://git.elphel.com/Elphel/linux-elphel ), because while in FPGA sensor and compressor channels can be paired in any combinati

Re: [Elphel-support] Record full res and stream compressed at the same time?

much! On Sat, Jul 22, 2017 at 9:53 PM Elphel Support support-list@support.elphel.com wrote: David, Do you mean resolution or JPEG quality? Different JPEG quality can be achieved with the same FPGA code, but different software if you use less that all 4 channels - run 2 compressors from

Re: [Elphel-support] Record full res and stream compressed at the same time?

to documentation or provide some additional pointers regarding the adjustments necessary to achieve multiple compression parameters on a single sensor? I'd like to get a better idea in mind before deciding which route we'll go. Best, David On Sun, Jul 23, 2017 at 9:32 PM Elphel Support support-list

Re: [Elphel-support] Cameras and processing modules for Self Driving Cars Vision System

Marius, About "uncompressed video" for post-processing. For post-processing we use special format of compressed images based on a simple JPEG compression, but in contrast to JPEG goal: "reduce bandwidth in such a way that humans will not notice the difference" We use a different one: "reduce

Re: [Elphel-support] Auto-discard notification

. = Forwarded message = Subject: Re: [Elphel-support] Cameras and processing modules for Self Driving Cars Vision System From: "Marius Slavescu"mar...@gtarobotics.com Date: Fri, 30 Jun 2017 08:41:58 -0400 To: "Elphel Support"support-lis

Re: [Elphel-support] auto exposure on multi sensor setup & binning question.

Hi, Currently we are testing a panoramic NC393 camera and are having problems with the auto exposure on multiple image sensors. When there is half shadow, half bright light in the collective images. The image is dark on the shadow part. Does autoexposure apply globally or should

Re: [Elphel-support] video camera for drone project

Hello Maria, The camera uses mt9p031 sensors, this datasheet http://www.onsemi.com/pub/Collateral/MT9P031-D.PDF lists some of the frame rate/resolution combinations - camera supports all what sensor can provide. With latency with default firmware camera sends acquired frame immediately after

Re: [Elphel-support] auto exposure on multi sensor setup & binning question.

...@theidiotcompany.eu wrote On 05/31/2017 05:53 PM, Elphel Support wrote: Hi, Currently we are testing a panoramic NC393 camera and are having problems with the auto exposure on multiple image sensors. When there is half shadow, half bright light in the collective images

Re: [Elphel-support] Software flow for recording uncompressed/raw video

Hello Shashank, There is no "uncomressed" video in the camera, the video that is recorded is compressed. But with Elphel cameras it is possible to record video/images in such a way, that after processing (uncompressing) each pixel value differs from the 12-bit original sensor data by less than

Re: [Elphel-support] Info needed 10338 rev. d/e J1 connector

Frederick, Parts list is missing for the board, we'll fix that. Connector is the same as J6-J9 of the 10393 board (https://wiki.elphel.com/images/1/11/10393b.pdf) https://www.digikey.com/product-detail/en/hirose-electric-co-ltd/FH12-30S-0.5SV-55/HFL130CT-ND/1110414 Andrey On Mon, 04 Dec

Re: [Elphel-support] Sensor Synchronization and Memory

Hello Fabian, The sensors used in 393 have 2 major operational modes - free running and triggered (there are mode details in https://blog.elphel.com/2016/10/using-a-flash-with-a-cmos-image-sensor-ers-and-grr-modes/ and in sensor datasheets). In free running mode the maximal frame rate does

Re: [Elphel-support] 答复: 答复: 答复: Re: Quote for 1 NC393-Stereo camera

Hello Winson, We do not have any C/C++ code for stereo matching and calibration. It is a very mature area and there is a lot of software that can be used for that purpose, the best is probably OpenCV. We could not possibly write some magic in-house code that would significantly outperform what

Re: [Elphel-support] 答复: 答复: 答复: sync stereo with lidar

Hello Winston, 1) Video streamer format does not allow Exif data, you need to acquire images from the imgsrv - there is a min ihelp at 192.168.0.9:2323 (without any other parameters). Saving images from it preserve all Exif data. It is also preserved when using camogm to record video sequence

Re: [Elphel-support] 答复: 答复: 答复: 答复: 答复: 答复: 答复: 答复: 答复: 答复: Re: Quote for 1 NC393-Stereo camera

On Mon, 08 Jan 2018 20:58:46 -0800 Winston Zhangwinston.zh...@blacksesame.com.cn wrote Hi Andrey I have set all the same parameters. Please look at attachments. How did I set the 245 as your shown on screenshot? This page on mine did not show any object, please look at

Re: [Elphel-support] Sensor Synchronization and Memory

to 8192 byte. Is this correct? Kind regards, Fabjan Sukalia Am 2017-12-15 um 17:57 schrieb Elphel Support: Hello Fabian, The sensors used in 393 have 2 major operational modes - free running and triggered (there are mode details in https://blog.elphel.com/2016/10/using-a-flash

Re: [Elphel-support] 答复: 答复: 答复: 答复: 答复: 答复: Re: Quote for 1 NC393-Stereo camera

...@blacksesame.com.cn; Qun Gu qun...@blacksesame.com 主题: 答复: [Elphel-support] 答复: 答复: 答复: 答复: 答复: Re: Quote for 1 NC393-Stereo camera Hello Thank you for your patient to answer my question. But I have some others as follow. 1)How should I make the left and right camera AWB change synchronously

Re: [Elphel-support] 答复: 答复: 答复: 答复: 答复: 答复: Re: Quote for 1 NC393-Stereo camera

ston Zhang winston.zh...@blacksesame.com.cn 抄送: Elphel Sales | Olga Filippova sa...@elphel.com; Dan Pan ad...@blacksesame.com; Tao Zhang tao.zh...@blacksesame.com.cn; Qun Gu qun...@blacksesame.com; elphel support-list support-list@support.elphel.com 主题: Re: [Elphel-support] 答复: 答复: 答复: 答复: 答复: Re: Q

Re: [Elphel-support] 答复: 答复: 答复: 答复: 答复: 答复: 答复: 答复: 答复: 答复: 答复: Re: Quote for 1 NC393-Stereo camera

Hi Tao, Your camera has 128GB SSD - it is much better to record images, than SD card. It is much faster, larger volume and will last longer. You can transfer data over the network or using eSATA cable (it is faster). Camera images are compressed individually for post-processing, so the video

Re: [Elphel-support] 答复: 答复: 答复: 答复: 答复: 答复: 答复: 答复: Re: Quote for 1 NC393-Stereo camera

, Zhangdong road, Pudong area 发件人: Elphel Support [mailto:support-list@support.elphel.com] 发送时间: 2018年1月9日 星期二 9:24 收件人: Tao Zhang tao.zh...@blacksesame.com.cn 抄送: Winston Zhang winston.zh...@blacksesame.com.cn; Elphel Sales | Olga Filippova sa...@elphel.com; Qun Gu qun...@blacksesame.com 主

Re: [Elphel-support] 答复: 答复: 答复: 答复: 答复: 答复: 答复: Re: Quote for 1 NC393-Stereo camera

light. But it cannot converge to a stable status. We will attach images and videos of those problems later. Tao Zhang 章 涛 发件人: Elphel Support [mailto:support-list@support.elphel.com] 发送时间: 2018年1月9日 4:02 收件人: Tao Zhang tao.zh...@blacksesame.com.cn; Elphel List support-list

Re: [Elphel-support] Fwd: 14Mpix sensor not detected

Richard, It is possible with https://wiki.elphel.com/wiki/Camogm . Most efficient way to record video stream is when the SSD is formatted with two partitions - one normal, and the other - just raw data, recorded consecutively. This reduces CPU load, wears SSD flash uniformly and provides

Re: [Elphel-support] Elphel 393 Question

Mohamed, It may be that the corner is not cut off enough (mechanical switch is still engaged) or the card does not have a resistor on D3. When selecting the card we X-rayed multiple brands - many cards have active components in that area and do not survive cutting the corner off. Does it still

Re: [Elphel-support] 答复: 答复: 答复: 答复: 答复: sync stereo with lidar

Hello Winston, Tomorrow Oleg will try to reproduce your settings - so far we did not have such problems. BTW, you can set same parameters on multiple ports simultaneously, using "Broadcast Mask" (hex number 0..f) Port 0: 1 port 1 - 2 port 2 - 4 port 3 - 8, So broadcast mask 3 will set the

Re: [Elphel-support] Script for changing the SADDR bit for the MT9P031 sensor

Frederick, you need to power you board either directly from the 10393 3.3V on the cable, or (if you board has other components that need more power than 10393 can provide) use external power switch driven by the cable power. The problem is that the cable goes directly to the FPGA port that

Re: [Elphel-support] Setting width and height

Richard, Images are compressed as 16x16 macroblocks, and while it was possible to make any even (for Bayer mosaic) number for width/height by padding to integer number of macroblocks that would not increase the frame rate. So I decided not to support fractional macroblocks to simplify the code

Re: [Elphel-support] Script for changing the SADDR bit for the MT9P031 sensor

better with it. Currently I'm using an external power supply to source the 2.8V voltage so I guess the timing for the power sequence is not ok. Frederick On Fri, Mar 9, 2018 at 5:51 PM, Elphel Support support-list@support.elphel.com wrote: Fred, Just to clarify: 10393 can drive up to ~1.0A

Re: [Elphel-support] Script for changing the SADDR bit for the MT9P031 sensor

on the power board because many components are mounted underneath the Traco DC-DC converter itself... When I plug the 48 V source, no 3.3V appears at the output. Frederick On Thu, Mar 15, 2018 at 10:29 AM, Elphel Support support-list@support.elphel.com wrote: Hello Frederick, Do you know

Re: [Elphel-support] Script for changing the SADDR bit for the MT9P031 sensor

Fred, Just to clarify: 10393 can drive up to ~1.0A, but there will be voltage drop on the cable (Elphel cables have thick power traces). Connector is rated 0.4A/pin. The sensor power is controlled by the script (same one that loads bitstream), power status/control is available over the sysfs

Re: [Elphel-support] Script for changing the SADDR bit for the MT9P031 sensor

, Elphel Support support-list@support.elphel.com wrote: Hello Frederick, Do you know power consumption on the ports? Do you have 10389 interface board with the SSD? If you run camera from the 3.3V - can you measure the total 3.3V current? Do you have sufficient fan cooling or heat sink? We never

Re: [Elphel-support] 答复: 答复: 答复: 答复: 答复: 答复: sync stereo with lidar

data get by “identify”, how to get the gamma value? Thanks, Allen Yin 发件人: Elphel Support support-list@support.elphel.com 发送时间: 2018年3月8日, 星期四 10:37 收件人: Winston Zhang winston.zh...@blacksesame.com.cn 抄送: Elphel Sales | Olga Filippova sa...@elphel.com; Tao Zhang tao.zh

Re: [Elphel-support] 答复: 答复: 答复: 答复: 答复: 答复: sync stereo with lidar

. It was so slow to download all the files. Best Regrad! Yicheng-Zhang Email: winston.zh...@blacksesame.com.cn Teil:18516291005 Addr: 707 room, 7th floor, building 4th, No.1761, Zhangdong road, Pudong area 发件人: Elphel Support [mailto:support-list@support.elphel.com] 发送时间

Re: [Elphel-support] 答复: 答复: 答复: 答复: 答复: sync stereo with lidar

. Best Regrad! Yicheng-Zhang Email: winston.zh...@blacksesame.com.cn Teil:18516291005 Addr: 707 room, 7th floor, building 4th, No.1761, Zhangdong road, Pudong area 发件人: Winston Zhang 发送时间: 2018年4月16日 星期一 10:54 收件人: 'Elphel Support' support-list@support.elphel.com; Allen Yin

Re: [Elphel-support] 14Mpix sensor update

Hello Richard, Oleg already fixed that issue, he got 13.5 fps - there is some inconsistency in the data sheet, he is trying to figure out what to believe and what is wrong. Default fps after reset is also not maximal (as it was for 5 MPix), but those 8 fps. When running at full frame rate full

Re: [Elphel-support] 答复: 答复: 答复: 答复: 答复: 答复: sync stereo with lidar

the original raw data from sensor. Thanks, Allen Yin 发件人: Elphel Support support-list@support.elphel.com 发送时间: 2018年3月22日, 星期四 23:23 收件人: Allen Yin allen@blacksesame.com.cn; Elphel List support-list@support.elphel.com 抄送: Pioneer Li pioneer...@blacksesame.com.cn; Tao Zhang tao.zh

Re: [Elphel-support] 答复: 答复: 答复: 答复: 答复: 答复: sync stereo with lidar

时间: 2018年3月27日 16:34 收件人: Elphel Support support-list@support.elphel.com 抄送: Pioneer Li pioneer...@blacksesame.com.cn; Tao Zhang tao.zh...@blacksesame.com.cn; Qun Gu qun...@blacksesame.com; Winston Zhang winston.zh...@blacksesame.com.cn 主题: 答复: [Elphel-support] 答复: 答复: 答复: 答复: 答复: sync stereo

Re: [Elphel-support] 答复: 答复: sync stereo with lidar

many times to bring up your ImageJ plugin but failed. Can you help us solve this issue. We now blocked by it. Thanks! Tao Zhang 章 涛 发件人: Allen Yin 发送时间: 2018年3月13日 11:15 收件人: Elphel Support support-list@support.elphel.com 抄送: Winston Zhang winston.zh...@blacksesame.com.cn; Tao

Re: [Elphel-support] 答复: 答复: 答复: 答复: 答复: sync stereo with lidar

Allen, ~/.imagej/Eyesis_Correction.xml is not really needed - it just hides/reveals some experimental buttons on the interface This is the contents of such file: ?xml version="1.0" encoding="UTF-8"? !DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd"; properties commentlast

Re: [Elphel-support] Trigger Output

Richard, Sorry it was not easy to find on our wiki, I added cross-links: https://wiki.elphel.com/wiki/Trigger_393 https://wiki.elphel.com/wiki/103891 10389 is needed to generate trigger output. There are two types of trigger output to generate it: 1. 5V/0.5A non-isolated, referenced to the

Re: [Elphel-support] 答复: 答复: 答复: 答复: sync stereo with lidar

. But I press run, ImageJ will work. I don’t know why. All steps follow the web page. If we get the gamma value, how to calculate the 12-bit pixel value. If gamma is 0.57, equation is: out(8bit) = a*in(12bit)^0.57, a = 2 .23? Thanks, Allen Yin 发件人: Elphel Support support-list

Re: [Elphel-support] 答复: 答复: 答复: 答复: sync stereo with lidar

ixel value. If gamma is 0.57, equation is: out = a*in^0.57, a = 2 ? Thanks, Allen Yin 发件人: Elphel Support support-list@support.elphel.com 发送时间: 2018年3月21日, 星期三 0:40 收件人: Allen Yin allen@blacksesame.com.cn; Elphel List support-list@support.elphel.com 抄送: Tao Zh

Re: [Elphel-support] 答复: 答复: 答复: sync stereo with lidar

Hello Allen, I can not reproduce your setup because we do not have any computer with MS Windows here, I haven't used this family of OS since 2001. Yes, Eclipse is a multi-platform program, but we never tested our code with Windows, so there could be our bugs when running on Windows. Can you

Re: [Elphel-support] NC353L ip address

Hello William, Do you have 10369 (interface) board in you camera? If yes, you can use serial console and see the IP. If you know most of the IP, such as 192.168.0.??? you may try (with the camera turned on and had time to boot): ping -b 192.168.0.0 You may also try using arp (

Re: [Elphel-support] Sensor Flex cable

100mm up to 130mm. The cable we have at the moment are 70mm. Kind regards, Richard Rigby Software Developer www.redzone.com  Ph: +64 9 479 9901 Fax: +64 9 479 9904 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand On Fri, 16 Nov 2018 at 12:15, Elphel Support wrote

Re: [Elphel-support] Sensor Flex cable

custom, or can we order them from another supplier? Kind regards, Richard Rigby Software Developer www.redzone.com  Ph: +64 9 479 9901 Fax: +64 9 479 9904 13 Tarndale Grove • Albany • Auckland 0632 • New Zealand On Fri, 16 Nov 2018 at 12:26, Elphel Support wrote

Re: [Elphel-support] Elphel 393 Nand upgrade

the local address at 127.0.0.1. This is on a Rev C board. Do you have any other ideas? Also I meant to send the previous email from my Redzone email so I'll CC myself to this chain. Thanks, Mohamed Morsy From: Oleg Sent: Tuesday, December 4, 2018 2:51 PM To: Morsy, Mohamed K Cc: elphel su

Re: [Elphel-support] 答复: 答复: 答复: 答复: 答复: sync stereo with lidar

-1108, Bldg36, No.2777, East Jinxiu Rd, Pudong District, Shanghai, China   发件人： Elphel Support 发送时间： 2018-12-17 10:12 收件人： Winston Zhang; Elphel List 抄送： Qiao Yan; David Zhang; Qun Gu; Tao Zhang 主题： Re: [Elphel-support] 答复: 答复: 答复: 答复: 答复: sync stereo with lidar Hello Winston, 1. I still do

Re: [Elphel-support] 答复: 答复: 答复: 答复: 答复: sync stereo with lidar

(Shanghai) Co., Ltd.  www.bst.ai Rm 1102-1108, Bldg36, No.2777, East Jinxiu Rd, Pudong District, Shanghai, China   发件人： Oleg 发送时间： 2018-12-13  03:44 收件人： winston.zh...@bst.ai 抄送： david.zh...@bst.ai; qiao@bst.ai; tao.zh...@bst.ai; Qun Gu; elphel support-list 主题： Re: [Elphel-support] 答复: 答复: 答复:

Re: [Elphel-support] 10393 Imagers Synchronization

Hello Mohammed, You can save camera settings so they will be precisely synchronized. In "free running" mode each sensor can have different WOI and so different FPS. You may find info on synchronization here: https://wiki.elphel.com/wiki/Trigger_393 The disadvantage of synchronized mode is in

Re: [Elphel-support] 10393 Imagers Synchronization

be noticeable? Mohamed From: Elphel Support <mailto:support-list@support.elphel.com> Sent: Wednesday, May 8, 2019 3:48:29 PM To: Mohamed Morsy; Elphel List Subject: Re: [Elphel-support] 10393 Imagers Synchronization   Hello Mohammed, You can save camera setti

Re: [Elphel-support] 18397_3D part files

Hello Romain, NC393-dev is rather generic name, we usually modify the exact kit contents to customer needs. Different types of the complete cameras are shown here: https://wiki.elphel.com/index.php?title=Elphel_camera_assemblies You can use X3D viewer to navigate assemblies (right click

Re: [Elphel-support] the question about your product.

We have several sensor boards, some are tested, some just designed. In addition to the 10338 (https://wiki.elphel.com/wiki/10338) and https://wiki.elphel.com/wiki/10398) we have 103992 for Flir Lepton3.5 https://wiki.elphel.com/wiki/103992 and designs: 103981 for AR1820

Re: [Elphel-support] about your camera

On Sat, 21 Dec 2019 23:51:27 -0800 Mas Ard wrote Dear Sir/ Madam, I have checked your products and I am a little confused about something, Can you guide me? 1) Can users set exposure time? what is the range of it? Yes, definitely 2) As

Re: [Elphel-support] Fwd: driving any desired sensor

Hello Ali, On Semiconductor purchased most of the other US sensor manufacturers. That particular MT9M001 you mention (as well as MT9P006 we use in most applications) was first produced by Micron ("MT" means "Micron Technology"), then it was Aptina, and finally On Semiconductor. They even own

Re: [Elphel-support] Questions about Elphel 323 Sensor Board

Hi Nick, I believe it also needs other boards - I need to check, these boards were made before we started wiki.elphel.com and put there documentation. These boards docs are here: http://legacy.elphel.com/3fhlo/ The 323 cameras used older 10313 boards (2 of them as the bandwidth of the older

Re: [Elphel-support] Questions about Elphel 323 Sensor Board

Nick On Wed, Apr 15, 2020 at 12:07 AM Elphel Support <mailto:support-list@support.elphel.com> wrote: ___ Support-list mailing list mailto:Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_suppor

Re: [Elphel-support] Fwd: driving any desired sensor

Of Interest increase the frame rate?Thank you for your help  Ali On Sun, Mar 8, 2020 at 12:22 PM Elphel Support <mailto:support-list@support.elphel.com> wrote: Hello Ali, On Semiconductor purchased most of the other US sensor manufacturers. That particular MT9M001 you mention (as well

Re: [Elphel-support] An error in replacing the 14-megapixel sensor(mt9f002) by 5-megapixel sensor(mt9006)

Hello Ali, There should be no problems with impedance matching, we tested both types of sensors with up to 450mm cables (for ectremely long cable programmatic phase adjustment may be needed). And the cables are the same for both serial (14MPix) and parallel (5MPix). Andrey On Mon,

Re: [Elphel-support] about "103982"

Dear Ali, We developed the PCBs for CMV12000 for our customer who decided to cancel the project. So we have the boards built, but we never assembled and tested them and we haven't designed FPGA and firmware code. We may revive this project in the future, but our current focus is on

Re: [Elphel-support] Request for information

We never tried to build OpenWRT software for the cameras, it uses OpenEmbedded Yocto Poky revision = 2.7.1 (Warrior) - https://wiki.elphel.com/wiki/Poky_manual Andrey On Sun, 20 Dec 2020 11:13:58 -0700 Nhlanhla Kubeka wrote To whom it may concern I am building my networks

Re: [Elphel-support] about "103982"

as well? What about Linux kernel drivers? We have started PCB design . Could I send the PCB file and ask for your comments? Ali On Tue, Oct 27, 2020 at 5:14 PM Elphel Support <mailto:support-list@support.elphel.com> wrote: Dear Ali, We developed the PCBs for CMV12000 for our custom

Re: [Elphel-support] HDD/Recording NC353L

Hello William, Did it work before? Can you please download and send camera status report? Direct link (if the camera IP is the default 192.168.0.9): http://192.168.0.236/camerasetup/report.tar.gz Or you can open "System Preferences" link from the camera home mage, select "Status Report" and

Re: [Elphel-support] ELPHEL nc333l VNR.:06:10:3A

Hello Roger, Our cameras have standard C/CS mounts (CS - directly, C - with 5mm adapter ring), so you can purchase lens from any place (it should be 1/2" or larger format - e.g. 2/3", 1"). I do not recognize the particular lens shown in the photo - did you purchase the camera directly from

Re: [Elphel-support] Help on possible faulty FPC cable [SEC=UNOFFICIAL]

cables for the two sensors. And it will be one sensor per camera body. One with 100mm FPC and another with 70mm FPC. My question is when we replace the 450mm with 100mm cable, do we need to change the port configuration? Thanks. Regards, Norman From: Elphel Support <mailto:support-l

Re: [Elphel-support] Help on possible faulty FPC cable [SEC=OFFICIAL]

it ? Andrey On Wed, 23 Feb 2022 02:46:52 -0700 XIONG, Norman wrote Dear Elphel support team,   We have a NC393 system, with two sensors connected by 450mm FPC cables. Ever since we put the system together in last July, port 1 was unstable and lost connection every a few

Re: [Elphel-support] Help on possible faulty FPC cable [SEC=OFFICIAL]

 response.  Here are the two log files, with both ports connected with sensors. I'll try to open up the box to reconnect the cable shortly. Regards,  Norman From: Elphel Support <mailto:support-list@support.elphel.com> Sent: 28 February 2022 10:19 AM To: XIONG, Norman <

Re: [Elphel-support] Help on possible faulty FPC cable [SEC=OFFICIAL]

=0 GLOBALS[sensors][port][0]=mt9p006 00037.41 autocampars: port=1 GLOBALS[sensors][port][0]=none 00037.42 autocampars: port=2 GLOBALS[sensors][port][0]=none 00037.43 autocampars: port=3 GLOBALS[sensors][port][0]=none ... Andrey On Sun, 27 Feb 2022 17:50:35 -0700 Elphel Support

Re: [Elphel-support] "Re: ELPHEL nc333l VNR.:06:10:3A"

Hello Roger, I may try to delete it from our history, but it is not what that we display. We display archive from MailArchive - the service that archives many public mail lists. And probably it is not the only archive - I did not keep track of it, but was seeing other mail archive services

Re: [Elphel-support] Two cameras need your kind help

rom: K. Al-Madani <mailto:mad...@live.com> Sent: Tuesday, May 9, 2023 12:21 AM To: Elphel Support <mailto:support-list@support.elphel.com> Subject: Re: [Elphel-support] Two cameras need your kind help   Hello Andrey,  Thank you very much for your help I just noticed the three camera

Re: [Elphel-support] Two cameras need your kind help

Support <mailto:support-list@support.elphel.com> Sent: Monday, May 8, 2023 6:15 PM To: K. Al-Madani <mailto:mad...@live.com> Subject: Re: [Elphel-support] Two cameras need your kind help   Khalid, We still have software installed on one computer, I'll look how to reprod

Re: [Elphel-support] Problem with reflashing of Elphel 353

Kai, We did not use 353 for for a long time, and yes, I know that the flash memory in the camera deteriorates after years, so reflashing helps. I have software installed on one computer and can try to reflash if you send  us the camera boards. Andrey On Sat, 20 Jan 2024

Re: [Elphel-support] combining frames

Hi Andreas, But the sensor doesn't give the full field then, does it? If I got it right it starts at the starting row and column and shows a window with the specified width and height. Yes Yes that's the mode I'm speaking of. Scaling the full field to 1296x960 and then combining the frames

[Elphel-support] mage Noise problem

Dear Kaien, First, can you please provide us with the following info: go to http://camera-ip/index.php?site=camerasetup/setup.php then click on Status Report and send it to us. If FPGA Version is 3534010 then get other version of x353.bit from here:

Re: [Elphel-support] Camera issue

Dear Salvador, I hope you got the CF connector board, or getting it really soon. Happy travelings, let us know when you come back if you've got the board and were able to put it in and use. Thanks, Olga ___ Support-list mailing list

[Elphel-support] Focusing issue

Dear Ángel, Did you get an adapter ring from us? You might have removed it with the plastic front cover. Like this one: http://www.avsupply.com/details/vm400.shtml Do you have to unscrew the lens when the ring is installed? Best regards, Oleg ___

[Elphel-support] UDP Image server

Leonardo, Andrey answered your questions already. Two more things: 1. Do you still need the 10359 board? (your questions make me think you don't =) ) 2. We haven't received the payment for the camera from your company. Could you please verify that? Oleg

Re: [Elphel-support] Using the RJ14 port to trigger a camera fla

Dear Peter, I couldn't find much documentation on this part is how do I trigger the camera internally? It should work after you set TRIG=0x4 have TRIG_CONDITION=0x0. The period is set by TRIG_PERIOD. And you're right - for the camera to generate the output pulse you need to set

Re: [Elphel-support] hi

Hi Vineeth, a. Try ping -w 1 -b 192.168.0.255 - if the camera has some other ip you w ill probably get it. When I test cameras I usually assign them ips from 192 .168.0.160 to .169. b. As your camera has usb then it should have a phone socket on the side (under a small cover) and also you

Re: [Elphel-support] feature request

We can remove the IR-cutoff filter that is place between lens mount and sensor front end pcb upon request. If you need IR spectrum only I assume there are other filters available that can be used instead of the IR-cuttoff filter. Regards Sebastian On Mon, Aug 2, 2010 at 1:44 PM, Alexey

[Elphel-support] Request for video surveillance-distribution sys

Dear Osman, thank you for your interest in Elphel products I will forward your request to our technical team for their recommendations. Please excuse a long wait for the reply as we are participating in 3 conferences for the open source products almost simultaneously and our staff is stretched.

Re: [Elphel-support] how do I reflash the camera via netboot mode?

On Tue, Nov 2, 2010 at 19:40, Andrey Filippov and...@elphel.com wrote: On 11/2/10, Ákos Maróy a...@maroy.hu wrote: Andrey, actually, this web interface resets the IP address, but not the gateway or the broadcast address. I was looking in /etc to find where these settings are saved, but

Re: [Elphel-support] how do I reflash the camera via netboot mode?

Thanks, I will look into it. On Wed, Nov 3, 2010 at 09:36, Ákos Maróy a...@maroy.hu wrote: Sebastian, Sebastian will look at the problem of not changing those settings and try to reproduce your case. He may need more input from your. Yes please describe as accurate as you can what fields

Re: [Elphel-support] how do I reflash the camera via netboot mode?

Akos, I improved the behaviour of the button and the way the validation checks are displayed: http://elphel.cvs.sourceforge.net/viewvc/elphel/elphel353-8.0/packages/web/353/camerasetup/network.js?view=log Thanks again for the report. Regards Sebastian On Wed, Nov 3, 2010 at 09:36, Ákos Maróy

[Elphel-support] technical doubts about our purchase

Carlos, energizer xp18000 Worked for us. Was even enough to power an external HDD. ... is it still possible to be exchanged after that for another lens? or is a fixed modification of the camera? Yes, it is possible to change the lens to any other with C/CS/M12 mount. Assembly of that lens

[Elphel-support] technical doubts about our purchase

Hello Carlos and Simon, we have received the payment and your order is ready for shipment. I would like to explain some details regarding the lenses you have selected. We have assembled the camera with the M12 Sunex Super Fisheye lens, with the specuial adapter, and we had to remove the IR

Re: [Elphel-support] the problems from the hdd (in short)

Carlos, Looking at the photos (they are very helpful, thanks!) I realized that the camera did have a manufacturing defect. It did not prevent the camera from working properly, but made the board too fragile - more than it has to be. All the connector pins were soldered OK (you can see the traces

[Elphel-support] Fw: Elphel support

Hello, in the field of PIV using Elphel camera of sensor type: MT9P001. Could you please send me the standard values of the camera that can work in the best form. The standard values that I mean are the best values shown in the attached picture (left side of the attached image). The

[Elphel-support] Fwd: expected imu data fortmat

, -Hamid -- Elphel Support Team supp...@elphel.com ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com

Re: [Elphel-support] [Elphel-support-Eyesis] TKIC-01974 Visual Safety

Dear Marcos, we have all the parts for 2 more stereo cameras, so this time the shipping can be done in just 2 weeks from the time of the order. Unfortunately, it is not possible to position the sensors vertically in the stereo application, since the disparity must happen over the horizontal

  1   2   >