Hi all,
I send this mail, because with my linux 2.4 and nvidia driver, i can't
use the nvidia module with xfree 4.3. I don't understand, because this
same configuration works correctly with another computer.
Before, Xfree 4.3 worked with a kernel 2.6 and the nvidia driver, and i
did not have
On Tue, Aug 12, 2003 at 01:57:33PM -0400, Tim Caine wrote:
I am using a board with the 5530 chip. When I switch consoles, the display
is blank. Also, sometimes the unit will not enter graphics mode when I
start X (the screen is blank). I can not get any error information because
I can not
I am trying to install with the binaries provided by xfree86. I ran
Xinstall -check
It response was Binary distribution name is 'Linux-ix86-glibc23'
I downloaded the 12 files, then ran Xinstall.sh.
Started seeing this error:
cannot handle file 'libc.so.6' with TLS data
I am running Red Hat 9.
On August 14, 2003 12:26 am, [EMAIL PROTECTED] wrote:
Please go through the attached server crash report and suggest a
solution.
My suggestion is that you are using an unsupported video card. What
Vendor/Make/Model is your video card? Are you using the correct driver for
it? If it is in
On Thu, Aug 14, 2003 at 05:38:36PM +0200, Alain TEULET wrote:
/usr/X11R6/bin/startx : line 113 : cannot create temp file for here document : Read
Only file System
Is your / or /tmp/ filesystem readonly? Maybe you've had some HDD
crash which lead to this...
Mit freundlichen Grüßen,
On Wed, 2003-08-13 at 10:14, Berge, Harry ten wrote:
But I thought the core X font / print calls like in motif don't support
UTF-8 ?!
They only support the encoding of the locale. If the encoding
of the locale is UTF-8, it will generally work fine.
From one perspective, UTF-8 is just
hi ,
after installing RedHat9.0 on my pc (i810/1GHz) I am facing
a problem relating to display. My display is not starting and the
log file of X in var/log is saying that two modules
bitmap and pcidata failed to load. Now how I will load these two
modules and how I will come to know which rpms
Not allowing write access to /dev/mem will not get us very far.
Essentially it means you cannot start an accellerated X server
when the grsecurity patches are in.
Currently we do need write access to /dev/mem to write to the
fb and the HW registers.
Egbert.
Brian Richardson writes:
Hello
This is likely one of the known bugs with the font renderer.
Try specifying the xtt module in the XF86Config instead of the
freetype module.
Mark.
On Wed, 13 Aug 2003 [EMAIL PROTECTED] wrote:
Hi!
Today I've expirienced X server crash. I'm not sure which details
Hi!
I'm currently bringing a graphical front end to an old IBM electronic
cash register. This machine has got a (mostly) PC style keyboard and is
internally attached to a PS/2 or AT keyboard controller. I'm using
Debian's XFree86 Version 4.2.1.1 on Linux.
Nearly all keys do work properly (some
I would remove the panel width and height and let the config program find
them himself:
Done, same result :-( Even the log files are identically (except of the
timestamp and the two removed options, of course :-) Anything else I could
try?
Thanks
Eugen
As-Salam Alaikum, May Allah's Peace, Mercy and Blessings be with you.
Dear Sir,
I am Mrs. Mariam Abacha, the widow of late Gen. Sanni Abacha former Nigerian Military
head of state who died mysteriously in June 1998 as a result of cardiac arrest. Since
his death, the family has been going
I've been trying to compile rom cvs, but can't get past make World
because of an error...
It seems to be looking for security document, but cant find it, so it
stops...
I'm on debian woody with 2.4.21 kernel using gcc 295 and I was
wondering if it could be an issue with the soiurce or with
On Wed, Aug 06, 2003 at 04:45:23PM +0800, Craig Ringer wrote:
I have a new Toshiba laptop with an NVidia-based card. The screen can do
a resolution of 1600x1200.
I tried to use my Gnome control panel
to increase the font size, and that works for many applications, but a
number of
hi,
It seems that the X-windows is already running on a
different tty (check with ctrl+alt+F7 key
combination), and still u get the same error, then
remove the /tmp/.X0-lock file and the
/root/.Xauthority file.
hope this will solve ur problem,
regards,
Sharad.
--- Ganesh Ganapathy [EMAIL
attached is the server log from an upgrade I attempted, running on Linux
7.2. First upgraded to XFree86 4.0.2, then immediately followed this up
with XFree86 4.3.0. Obvious initial problem was Linux 7.2 X86 didn't have
driver for NVIDIA card : GeForce2 MX
Determined from docs that the upgrade
Helo Mark,
Thanks by atention!
I don´t locate this files (bitmap pcidata). What I
can do? I am a inexperient user...
Saulo
--- Mark Vojkovich [EMAIL PROTECTED] escreveu:
I saw another report like this a week or two ago.
It seems that the modules XFree86 needs have either
I'm afraid you're talking to the wrong list.
You want to head over to www.redhat.com and search for win modem.
That should get you started. I'm not sure what redhat includes as far
as drivers, but it may be that there is an open source, or binary only
driver available from the
I had previously posted a note that I could not get XFree86 to work with
the Apple Studio Display 17 LCD via DVI port on a Radeon 7500 card. The
Apple monitor remained blank. I knew the hardware was ok because I could
drive a (borrowed) Sony monitor. Note that this hardware combination worked
Well for me to switch to my consoles once X is up and running I have to use
CTRL ALT F1-7 instead of just ALT F1-7 try that.
- Original Message -
From: Bernd Muent [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, August 05, 2003 6:39 AM
Subject: [XFree86] Changing virtual consoles
Hello,
I am running OpenBSD 3.3 and am having a problem. It said to send you
the output from scanpci -v.
Attached you will find that information. I have never had any problems
configuring X, so I hope this works.
Thanks,
Curt Micol
scanpci
Description: Binary data
XFree86.log
http://www.xfree86.org/4.3.0/Install.html
Also, many Linux distributions have easier ways to install, such
as RPMs, but the above instructions should work in any case.
Mark.
On Sat, 9 Aug 2003, Kim Mackey wrote:
Hello, and please forgive such a simple question, but I
take a look at the new radeon man page. You might try adding the
option MonitorLayout
from the man page:
Option MonitorLayout string
This option is used to overwrite the detected monitor types. This
is only required when driver makes a false detection. The possible
monitor types are:
I am using RedHat Linux #9 with an Asus P4P800 i865 800FSB and NVIDIA
GEFORCE-FX 128MB card and ViewSonic E90fb monitor. All is well during
install in text mode including opening page and non-text buttons and all
is well operating in text mode but monitor blacks out when I try to
'startx' and view
On Wed, Aug 06, 2003 at 02:20:18PM +0200, Anand Buddhdev wrote:
Most fonts should be fixed by using the GNOME and KDE control panels.
Mozilla you can fix in Edit-Preferences, choosing Appearance then
fonts in the dialog box and then increasing the font sizes shown
there. XMMS has a font
Hello,
I just encountered the problem, that the XFree is kind of slow on a
Apple PowerBook running Linux.
Is there any way (e.g. display driver) to speed it up using the second
chip (quartz)?
regards,
Sebastian
___
XFree86 mailing list
[EMAIL
On Mon, 11 Aug 2003, Ady Deac wrote:
I am trying to do 'make World' on the xc CVS source
code. The error I get is:
make[2]: Leaving directory `/home/src/xc/config/imake'
cd ./config/imake make -f Makefile.proto all
make[2]: Entering directory
`/home/src/xc/config/imake'
gcc
On Fri, 1 Aug 2003, Burjan Gabor wrote:
I'm using XFree86 4.3.0 on a Compaq Evo N400c notebook. This model
has an ATI Rage Mobility VGA controller.
At my workplace I have a quite good CRT monitor attached to the
docking station and elsewhere there is the built-in LCD display.
I also have
I couldn't find an answer to my specific problem on the list, so I'm
hoping that someone might be able to help.
Please note that I haven't been using Linux that long and I need
explicit instructions on how to solve this if anyone knows how.
The files attached are the XFree86.0.log file
http://bugs.xfree86.org/show_bug.cgi?id=573
Any ideas?
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
If this is the Intel 845G chip (it looks like it), you need to be
running XFree86 4.3. It wasn't supported prior to that.
Mark.
On Sat, 9 Aug 2003, Sandeep Kumar wrote:
Sir,
On configuring my new motherboard with onboard vga card with XFree86 -
configure' I got
Could be. You're sure it's not just the X server picking a refresh rate
higher than what the monitor can deal with? Maybe the default vsync rate
it uses at 1152x864 is enough lower that it falls within the monitor's
limits where it picks a higher rate for 1024x768? Did you try reducing
your HSync
Hi!
I'm wondering, if theres a feature to detach and reattach Sessions using
xdmcp, so that the Programms are still running on the Server and when I
attach the Session again, they're still there as i left them.
Is there something like this?
Greets,
Florian
--
Florian Flachmeier,
I have a new Toshiba laptop with an NVidia-based card. The screen can do
a resolution of 1600x1200.
I tried to use my Gnome control panel
to increase the font size, and that works for many applications, but a
number of applications, notably mozilla, and xmms, still use painfully
tiny fonts. I'd
Thanks to Craig Ringer and Jesse Hutton - while it does not solve
my problem yet, I made a little progress.
No Jesse Hutton, Option FlatPanel 1 does not work.
I810(0): Option FlatPanel is not used
--
Back to problem.
The Flat Panel 1504FP is 1024x768 with Depth 8. Hsync 30-60, Vsync 56-75.
In
Hi there,
I need some help to configure my Dell Inspiron
5000e so I will be able to start the X. I have been surfing so many internet
sites and read so many suggestion, tried many things, and now I had had
it.
Are there any chance that you can help me out on
this.
I have enclosed
Hi,
I've just updated to XFree86 4.3.0.
It works well, but I can not not change to any of the virtual consoles
with STRG+ALT+F[1-6].
Instead it writes 23~ (F1) or 24~ into a xconsole.
So what has to be changed?
I looked in .xmodmap:
Keycode 67 = F1 F11
I changed it to:
Keycode 67 = F1 F11 F1 F1
hmmm... it seems to find the monitor ok:
(II) RADEON(0): Monitor1 EDID data ---
(II) RADEON(0): Manufacturer: APP Model: 9217 Serial#: 50200042
(II) RADEON(0): Year: 2001 Week: 30
(II) RADEON(0): EDID Version: 1.2
(II) RADEON(0): Digital Display Input
(II) RADEON(0):
I have and old ATI Mach64 video card that works well in Mandrake 9.0
using XFree86 3.3.x, but not in Mandrake 9.1.
When updating/installing Mandrake 9.1, I try to config with XFDrake
using XFree86 3.3.x, but get no color bars during the test stage. When
I reboot, the XFree(86) server tries
Hey,
Loans are a very quick way to get behind.
What if we combined your debt into one manageable, LOW interest repayment?
- Save you a lot of money by eliminating late fees
- Settle your accounts for a substantially reduced amount
- Stop creditors calling you on the phone
- Avoid bankruptcy
...
On Sun, 10 Aug 2003, Matt Ficken wrote:
How can I display a transparent image w/o a window frame around it and with the
transparent parts of the image replaced with the window(s) behind it.
I believe that this is how windows on KDE, MacOS X's Aqua and M$ Windows XP all have
rounded
Sir,
On configuring my new motherboard with onboard vga card with XFree86 -
configure' I got the error:
XFree86 has found a valid card configuration.
Unfotunately the appropriate data has not been added to xf86PciInfo.h.
Please forward 'scanpci - v' output to XFree86 support team.
the output of
Just wanted to add some 'newbie instructions' on to that :0)
To make it always boot in runlevel 3 (non-graphical mode) instead of your
current runlevel 5, edit the file '/etc/inittab' -You'll find an entry with
'initdefault' on the end. Change the 5 to a 3 and save.
You don't need to reboot
Peter Wainwright writes:
I put some debugging spew in the XFree86 mouse driver and watched
it run; the problem seems to be with the timing of the reset
sequence. This as far as I could tell is what happens:
The driver seems to be sending the reset FF, waiting for
a while, decides
I am a beginner in Linux. I was trying to install
Slackware. But I have a trouble. Would you please solve
this problem for me?.
Thank you very much.
best regards,
kunta biddinika
Student of nuclear engineering
Gadjah Mada University INDONESIA
On Tuesday 05 August 2003 12:28 pm, Craig Ringer wrote:
Starting kdm from a root login brings up the login manager window where
he ca login as user.. Then make the changes to allow his syste to start
as init 5 (Xwindows), log out and reboot into Xwindows, kdm login
manager.
Yeah, I
I've been searching all my favorite download sites, but I can't seem to
find a good downloader for X. It should allow DL'ing of whole
directories, resume, and be compatible with X and Slackware Linux 9. Can
anyone recommend one?
-Jay
jayjwa
AT atr2 DOT ath DOT cx
I use an external USB mouse with my laptop. However, the laptop also
has an internal PS/2 touch pad. Is there any way to configure X so
that it recognises both devices, so that I can use the touchpad when
my external USB mouse is not attached? My OS is RedHat 9.
--
Anand Buddhdev
You may also want to
remove the matrox hal module.
do you mean /usr/X11R6/lib/modules/drivers/mga_hal_drv.o?
Hello fellows,
I just started to work in a company and we have
here DHCP server with a Xfree86 installed, but we don´t have the root access.
How can I log in a single user mode? Is there ohter way to change the root password?
We don´t even
know what version of Linux is running.
We junt
running mandrake9.1 + ATI 8500 apg card
tried DRI but hav isues getting it running(cant get aceleration working)
tried fglrx-glc22-4.3.0-2.3.0.i586.rpm(had it work once then no 3D
aceleration after that)
i would go back to MDK 9.0 but 9.1 runs so much better for me :)
i tried to go IRC in DRI
On Tue, 5 Aug 2003, Reshmi Jain wrote:
Please check the attachment. When i try to execute the startx
command following error message is displaced.
What may the reason?
X Font Server may not be running. Try to start/restart your XFS.
/etc/rc.d/init.d/xfst status
/etc/rc.d/init.d/xfs
Hi Anand!
On Thursday 07 August 2003 11:08, you (Anand Buddhdev) wrote :
I use an external USB mouse with my laptop. However, the laptop also
has an internal PS/2 touch pad. Is there any way to configure X so
that it recognises both devices, so that I can use the touchpad when
my external
Dylan Evans wrote:
Sounds similiar to a problem i had with my monitor, i'm still not sure
why it does it but if i start X in 1024x768 it goes to sleep (only
with the savage driver mind, vesa worked). The only way i managed to
get around it was to start up in 1152x864.
It's a wierd problem,
I am trying to use Matlab on on a Mac OS 10.2.6 using XFree86 4.2.0.1. I
have created a Simulink Model in an X-Windows window. Through the course of
creating it I accidentally moved the window high enough up on the screen
that the title bar is off the top of the screen. I can't figure out how to
Hi,
I was trying to setup PHP,
Apache, MySQL...all with sucess
yesterday evening. When starting up my server this morning, I could not get my
graphical user interface (which is a disaster for me). During booting, it
complains about parsing the XFree86Config file. Anyone can send me a
Hi
I have the same problem like the guy in this thread here
http://www.spinics.net/lists/xf-xpert/msg06599.html
I have a radeon 9700 pro. I get no error message with this config and I can use my 1st
display
but the 2nd seems to get no signal. I attached my config. Maybe it'll help you
Perhaps
I'm running XFree 4.3.0 on a ThinkPad R40, using the radeon module.
The R40 has a 1024x768 LCD panel. Most of the time I have it hooked
up to an external monitor which I run at 1152x864, and in that case
I'm using the PanelOff option.
Mostly X is working very nicely, except for this anomaly:
Nota: correo sin tildes para evitar posibles
incompatibilidades entre los diferentes sistemas de
correo
XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-72) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is
Sir,
I'm using EPOX 8RDA+ mainboard and Nvidia FX
5200 ultra videocard.
I've installed the RedHat Linux 9.0, and
upgrade/update the NVIDIA chipset and videocard kernel, edit the XF86Config
using emacs. but still no video output.
Please send me an information,about installing /
upgrading
On Mon, 11 Aug 2003, Eric Wong wrote:
Is there a way to invert _all_ colors displayed on an X server or at
least everything on the normal[1] X11 (minus special layers like
OpenGL
and xv) display?
I could write a script that does bitwise inverts on everything in my
rgb.txt, but I'm sure
Hello,
I have difficulty to use Xnest on some systems. It seems to me it
has something to do with the cookies in .Xauthority. On some systems
these cookies seem to remain after X terminates on others they are
removed. On these systems after launching Xnest on an alternate
display I can't connect
Hi,
I have installed Linux Mandrake 9.1 on the following computer:
HP Vectra VE 6/xxx Series 8 (Model number: D6546av)
with an AGP Matrox G100 Productiva (Model number D5064-6048) video card
During the installation the Mandrake installer detected correctly my video
card so I went on happy.
I
Hello!
I use my tv as a second display, but I don't have any input device
working for it. I have managed to get a second mouse working on my
monitor, but is there anyway of having this and a future keyboard work
solely with my tv set?
Thanks,
Bo
My XF86Config-4:
= Original Message From [EMAIL PROTECTED] =
I got the link to the sourceforge site for ATI mach64 cards off of Divx.com.
Some guy claimed 'if you have older mach64 based graphics cards, I can help
you.' Anyway, the link he supplied was to the GATOS page/project. It sounded
to
me like it
Dear XFree86 people,
I am trying to run your XFree86 4.3.0 on my Pentium computer with a
ATI Radeon VE 32 MB graphics card, a Highscreen LE 1024 monitor
(14 ´´) and Redhat 6.2 but my computer keeps on claiming to need Glide
after starting XFree86 with XFree86 -configure. As your script told me
The error is rather clear (see below) recreate your config file (I believe RH 8.0
still uses
Xconfigurator ...)
Lionel
--- Doug Lewis [EMAIL PROTECTED] wrote:
Module Loader present
OS Kernel: Linux version 2.4.18-14
([EMAIL PROTECTED]) (gcc version 3.2
20020903 (Red Hat Linux 8.0 3.2-7))
On Mon, Jul 28, 2003 at 02:41:40PM +0530, Hanmantrao,Suhas wrote:
hello,
I have installed BSD 4.7 on Pentium 4 machine. The graphics adapter card in
my machine is Intel 82845G/GL. I am struggling from past 1 week in
configuring and starting startx. Please help me in this regard. When I run
startx
I don't have that particular card, but I do have the ATI AIW 9000 Pro,
and I'm running it with XFree 4.3 and SuSE 8.0 using their RPMS. Sax
didn't work too well, but I'd already set it up with my old banshee so I
just changed the card section in /etc/X11/XF86Config to:
Section Device
www.winischhofer.net/linuxsisvga.shtml
Forget the SiS website.
Thomas
Andrew Rothbart wrote:
Hi everyone, I'm a linux newbie trying to sort out some problems with
XFree.
I am running XFree 4.3 under the Mandrake 9.1 distribution. My video
card is a SiS 630 onboard. I'm not sure how much
when i installed the x window it ran in the test
and kde screen to big for my moniter I was told i could use xvidtune to change
the settings so it would fit but when i tried to use it it said cant open
display is there something i can do so it will run
yes, both 16 and 24 bit should work fine.
Alex
--- Larry McDaniel [EMAIL PROTECTED] wrote:
On Sun, 2003-08-10 at 22:45, Alex Deucher wrote:
remove the ALL the lines that say VideoRam and add
Screen 0
to the first device entry in your config file.
upon first testing, that seems
Unfortunately I suspect this problem lies in the HAL library. As I
recall the mga driver uses the lib for mode switching if it's available
and I think it may be required for use of the DVI ports. the HAL
module may not be multi-card aware and that might be part of the
problem. you could use the
Hello-
Sounds neat, thanks for the font. I downloaded, but am unshare how/wher
to install a font. I'm running rhat 9.0. Do I put it in
/usr/share/fonts? If so, what directory? Once it is in there? does that
mean that all apps can use it, i.e. the gimp, abiword, openoffice?
Thanks,
Michael
Ya es la 4ª vez ó la 5ª que les mando este error. Lo
instalé3 o4 veces y sigue igual. Con el gdm me manda a un
entorno gráfico pero no reconoce el raton, configuro el teclado, tarjeta,
monitor y al ir al mouse se queda colgado.
Con Linux Mandrake me funciona
todo bien y reconoce todos
Emilio,
I have a Diamond Stealth 64 VRAM 3240 ( TI RAMDAC ) video card and HAVE
the same problem.
XFree86 2.4.x fails at the RAMDAC probe and exits.
I now use ¨vesa¨ in stead of the ¨S3¨ driver.
Now I am stuck with 1024x768 / 16bpp in stead of 1152x864 /16bpp !
I could go back to XFree86
When I try it with the startx command, the screen flash and give me this output.
startx -- :1 -query sunbox
Yeah, it'll do that. X -query host is actually the correct usage, the
guy who responded to your post misunderstood what you were trying to do.
In an XDMCP query like you're doing, you
I have a problem with my RedHat 9.0 configuration of my Matrox G2+ video
card.
When I run
XFree86 -xf86config XF86Config.new, I get a mouse cursor as an X, that can
be moved across the screen, but no other video.
To get out of this, I hit the CRTL-ALT-BACKSPACE keys.
In addition to the error
Is there a way to invert _all_ colors displayed on an X server or at
least everything on the normal[1] X11 (minus special layers like OpenGL
and xv) display?
I could write a script that does bitwise inverts on everything in my
rgb.txt, but I'm sure enough apps/toolkits specify colors directly in
Hello,
Can anybody help me, please?
Thank you,
FERNANDA EMANUELLA SILVEIRA
[EMAIL PROTECTED]
XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June
This card is supported in XFree86 4.3.
Mark.
On Tue, 5 Aug 2003, Mike Metal wrote:
hi,
i was just wondering if anyone knows if this card has or is going to get video
driver support.
Thanks.
___
XFree86 mailing
Sorry, what I meant to say was actually attach the file and send it to me
directly.
Weston
On Monday 11 August 2003 10:59 am, Wim Wauters wrote:
Hi,
I was trying to setup PHP, Apache, MySQL...all with sucess yesterday
evening. When starting up my server this morning, I could not get my
, It looks like you have misdefined the frequencies of your monitor, for
what i have readen, you should define better your monitor's frequencies. If
you are using Debian, you should do:
dpkg-reconfigure xserver-xfree86
and a wizard will help you configuring X
Hola, también hablo
Hello,
X windows is not running. Could you please
help me to resolve this problem?. I am running Red Hat Linux release 8.0
(Psyche)Kernel 2.4.18-14 on an i686. when I tried to run X windows, it
gives the following error.
What does oldval1 refer to in the line
II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000
in the Xfree86 logfile?
Where are these things documented?
thanks,
Michael
___
XFree86 mailing list
[EMAIL PROTECTED]
Hi,
I just sent a email to you guys but included the wrong output from lspci
-v
the output should of been the following:
01:00.0 VGA compatible controller: S3 Inc. [ProSavageDDR K4M266] (prog-if 00 [VGA])
Subsystem: Giga-byte Technology: Unknown device d000
Flags: bus master,
Hallo!
I need please help on how to hide a widget when I'm using XtRealizeWidget to
realize it.
Bellow a piece of code to show how I'm proceding.
[begin of code]
Widget my_Widget;
Display* display;
XtAppContext appContext;
...
my_Widget = XtVaAppInitialize(appContext, my_App,
hai,
i can't enter to xwindows in redhat 8.0. the error display to me:
fatal server error:
could not open default font 'fixed'
i attach together the file (reporting problem) in /var/log/xfree86.0.log
so how i can solve this problem.
bye...
Dear Sir/Madam,
I found your company's details on the internet, we are a manufacturer of portable
trade show
display system in China mainland, our products were exported more than 35 countries,
we hope
to look for more dealers world wide, if you are interested in our products, please
view
On Mon, 11 Aug 2003, Lars Hecking wrote:
Mark Vojkovich writes:
On Fri, 8 Aug 2003, Lars Hecking wrote:
http://bugs.xfree86.org/show_bug.cgi?id=573
Any ideas?
As Egbert says, it looks like your ModulePath in your
XF86Config file isn't correct.
A full
I have been wrestling with this problem for the last
week. I searched for answers in various databases and
FAQs. I tried entering different values into the
config tools and all I wound up doing was to break the
Xfree server. So now maybe I can get some answers
here?
The problem(s):
I
On Tue, Aug 12, 2003 at 10:37:15AM -0700, Lionel Lecoq wrote:
interestingly enough the latest mga on the matrox site does not seem to need the HAL
library
anymore for DVI. Maybe because it has grown fat enough to probably include it...
I am using it with a G550 and a DVI driven monitor
On Tue, 12 Aug 2003, Richard Lynch wrote:
My laptop with a whopping 16M of RAM and 1G hard drive (with only
300M free now) needs XFree86.
Buying more RAM to get to the MAX of 32M is possible, I guess, but sub-optimal.
Alas, the most recent version of XFree86 is a bit much for it.
What
On Wed, 2003-08-13 at 08:50, Berge, Harry ten wrote:
Hi,
We have an 'old' Motif application that needs to becomeUTF-8 aware for a
Chinese customer. The question is how? Motif doesn't support UTF-8, so
basically the advise that we already had was go to use Qt or GTK, don't use
Motif
Hallo!
where to find the argument list (...) from void XtVaSetValues(w, ...) where w
is a widget?
Regards
James
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
My laptop with a whopping 16M of RAM and 1G hard drive (with only
300M free now) needs XFree86.
Buying more RAM to get to the MAX of 32M is possible, I guess, but sub-optimal.
Alas, the most recent version of XFree86 is a bit much for it.
What version would you consider optimum for such an
I'm afraid I don't speak Spanish, at least, I think that's Spanish! :0)
Anyway...
From your logfile, X is complaining you don't have a mouse. Or at least, you
don't have a mouse on /dev/psaux.
If you actually, physically, don't have a mouse, try using the option
allowmouseopenfail in your
hi there,
please help us with this problem,
i recently install Redhat 9.0 with XFree86 4.3.0
everything just fine, and i use the XWindow with no problem at all.
But suddenly after using the XWindow for some 2 months, my Linux
show an error message about couldn't start the XServer, and come up
Thanks. That is great help.
I checked the security documentation for XFree86, but it is very
difficult to understand how to deal with credentials. What is the best
way to set credentials for my server?
-Leo
Egbert Eich wrote:
If you have your server running already and you get authorization
You can start by using an XFree86 version that isn't
2 years old. XFree86 4.3 is the newest version.
Mark.
On Tue, 12 Aug 2003, Kunta Biddinika wrote:
Please give me suggestion for this log file:
==
1 - 100 of 327 matches
Mail list logo
