Working at JPL on Sunday huh!?? A buddy of mine used to work there years ago.
Thanks for the tip. I think I'll give it a shot. P&P isn't a problem, these have to be had inserted and soldered anyway! Tony > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of John M. Cardone > Sent: Sunday, February 03, 2002 10:12 AM > To: Protel EDA Forum > Subject: Re: [PEDA] Component partition > > > Tony, > You could keep the schematic symbols separate and add alternate packages > that would have convenient origins to allow correct placement to mimic a > single package on the pwb. The schematic should make it clear that D1 is > related to SW1. If the single package is used you can blank the diode > reference designator. Problem? pick and place, BOM, extraneous lines on > assembly drawing.... > John > > Tony Karavidas wrote: > > > > Here's one to ponder: > > > > I have a schematic that uses an array of SPST switches and LEDs. > > > > On the PCB, I want to potentially keeps these as integrated parts, or > > possibly as separate LEDs and switches. > > > > How can I draw one schematic and still have the flexibility to > use either > > physical configuration? If I keep the LED and switch arrays > separate in the > > sch, then annotation will make two parts (D1 and SW1) for each > switch with a > > built-in LED. > > > > If I make a special sch symbol that contains an LED and a switch, the > > schematic is ugly as hell, and THEN I can't use a separate switch and > > separate LED. > > > > What would you do??? > > > > Tony > > -- > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >John M. Cardone Electro-Mechanical Dsgn. Engr. Grp. > >M/S 278-100 Mechanical Engineering Section, 352 > >4800 Oak Grove Dr. NASA / Jet Propulsion Laboratory > >Pasadena, Ca 91109 > >Tel: 818.354.5407 MailTo:[EMAIL PROTECTED] > >Fax: 818.393.4860 > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
