Re: [AFMUG] Fwd: Cambium Networks Inc. FCC ID Application for NewEquipment

I believe 802.11ac Wave2 based PTP On 1/12/2018 11:45 AM, ch...@wbmfg.com wrote: What does it do? *From:* Colin Stanners *Sent:* Friday, January 12, 2018 10:42 AM *To:* af@afmug.com *Subject:* [AFMUG] Fwd: Cambium Networks Inc. FCC ID Application for NewEquipment PTP550 -- Forwarded

Re: [AFMUG] WTB. 900 single pol omni

Got two sites with an LMG/Antel 9dBi H-pol and an L-com 8dBi V-pol. Close enough. We mounted them at the same height on both sites. And when an SM is in-line with the two, it doesn't seem to work all that good. They will run MIMO-A frequently. Broadside works fine. So when the weather stops bei

Re: [AFMUG] RackInjector + ePMP 2k

e it. Now I'm afraid I'll have to join Hammett's DC+SFP crusade. I'm scrrrd. On 1/10/2018 11:19 PM, Forrest Christian (List Account) wrote: All cambium radios which take sync over power should be set just like traditional canopy, or else sync over power won't wo

Re: [AFMUG] RackInjector + ePMP 2k

take any power pinout you throw at it. On Tue, Jan 9, 2018 at 11:42 PM, George Skorup mailto:george.sko...@cbcast.com>> wrote: No, this is just my bench setup for now. So no surge suppressors, bonding and stuff to make things more confusing. Honestly, I've just been usin

Re: [AFMUG] RackInjector + ePMP 2k

ounds ar bonded top and bottom and the pipe is also, so is an equal ground plane with too long a run, its freaking it out some how, havent gone to unbond the tops yet im assuming the guts are essentially the same between powerinjector and rev 1 rack injector On Tue, Jan 9, 2018 at 9:59 PM, Ge

[AFMUG] RackInjector + ePMP 2k

So, the ePMP 2k ships with a passive POE brick that's +4/5 -7/8, 48VDC. That's how I have the port on the RackInjector jumpered. Radio is set to sync source = CMM3. Status shows CMM Sync Down. Now the obvious question is, I'm guessing I needs it to be -4/5 +7/8 like traditional Canopy? The 2k

Re: [AFMUG] Office Wire labeling

For office/structure wiring, simple electrical wire number markers work fine. The kind you can get in booklets or on a dispenser like this: https://www.zoro.com/3m-wire-marker-tape-wdispenser-preprintd-std-0-9/i/G3472226/ They're cheap enough to put two sets of numbers 3-5 feet apart at the end

Re: [AFMUG] Mass changes to specific config on 450 network

Resending to list. Stupid ass thunderchicken. The ID and onboarding key is for cnMaestro Cloud only. The device agents know when they're talking to an on-prem instance. Just feed them your on-prem URL (including https://) via config file, DHCP option, whatever. Nothing more is needed. On 12/

Re: [AFMUG] Mass changes to specific config on 450 network

Yeahbut the SMs have to talk to cnMaestro via L3 and he does not currently have that. The majority of his SMs are isolated to the LUID private range and they're managing them over the AP proxy only. On 12/26/2017 3:46 PM, Sean Heskett wrote: If you onboard all the APs to cnMaestro and have them

Re: [AFMUG] Mass changes to specific config on 450 network

responding LUID ... otherwise, we will need to login to every am manually and make changes. Cheers, Andreas Wiatowski, CEO Silo Wireless Inc. 1-866-727-4138 x-600 http://www.silowireless.com Wireless | Fibre | VoIP | PBX | IPTV On Dec 26, 2017, at 11:25 AM, George Skorup <mailto:george.sko...@cbcas

Re: [AFMUG] Mass changes to specific config on 450 network

upport or post up on the community site. On 12/26/2017 7:08 AM, Andreas Wiatowski wrote: SNMP write is off, is there a way to turn that up enmass? Cheers, Andreas Wiatowski, CEO Silo Wireless Inc. 1-866-727-4138 x-600 http://www.silowireless.com Wireless | Fibre | VoIP | PBX | IPTV On Dec 25,

Re: [AFMUG] Mass changes to specific config on 450 network

The disk image in the OVA is VMDK, which I believe they did so it would run on VirtualBox or VMWare out of the box. I've used vbox-manage to convert it to VHD for Hyper-V, every one since 1.3.something. Vbox-manage can also convert to QCOW, RAW, etc. It's really quite easy. On 12/26/2017 9:47

Re: [AFMUG] Mass changes to specific config on 450 network

, CEO Silo Wireless Inc. 1-866-727-4138 x-600 http://www.silowireless.com Wireless | Fibre | VoIP | PBX | IPTV On Dec 25, 2017, at 4:58 PM, George Skorup <mailto:george.sko...@cbcast.com>> wrote: If you have SNMP write enabled on the SMs, then use the AP's SNMP proxy. IIRC, it's s

Re: [AFMUG] Mass changes to specific config on 450 network

If you have SNMP write enabled on the SMs, then use the AP's SNMP proxy. IIRC, it's something like .LUID.interest>. Should be in the AP MIB. On 12/25/2017 11:36 AM, Andreas Wiatowski wrote: Hi Everyone, We have turned up the on premise version of cnMaestro and it turns up like a charm.  Kudo

Re: [AFMUG] Computer Image backup/restore

Can you run VMs for the stuff you need to control/do? Run VMs on those stations and replicate the storage to somewhere else? Then they're always backed up. On 12/21/2017 10:29 PM, Forrest Christian (List Account) wrote: So, clonezilla seems to be 'reboot into this tool and take an image'.   Is

Re: [AFMUG] Remote generator start options packetflux?

able to be replicated as a side effect of planned technology to be incorporated in an upcoming product. On Wed, Dec 20, 2017 at 8:23 PM, Lewis Bergman mailto:lewis.berg...@gmail.com>> wrote: Bummer. Guess there was not enough demand or to make variants? On Wed, Dec 20, 2017,

Re: [AFMUG] Remote generator start options packetflux?

t of planned technology to be incorporated in an upcoming product. On Wed, Dec 20, 2017 at 8:23 PM, Lewis Bergman mailto:lewis.berg...@gmail.com>> wrote: Bummer. Guess there was not enough demand or to make variants? On Wed, Dec 20, 2017, 5:18 PM George Skoru

Re: [AFMUG] Remote generator start options packetflux?

Yeahbut Forrest doesn't make the generator control board anymore. On 12/20/2017 5:01 PM, Lewis Bergman wrote: I think packetflux is likely the easiest with the most to offer our of the box. I know if one other out of the box solution that cost about 3 times as much. First can not only start i

Re: [AFMUG] Thank you Cambium

I think you guys confused Rory. Chuck/Sean are talking about the old Motorola PRIZM EMS (and BAM) for Canopy. I never used it. Or Wireless Manager. On 12/20/2017 11:57 AM, Rory Conaway wrote: 802.11ac? Not this Christmas.  Any new dates? Rory *From:*Af [mailto:af-boun...@afmug.com] *On Beha

Re: [AFMUG] Fiber media converters

I've used a couple of those. Work fine. Typical media converters will not let the fiber and copper links run at different speeds, but the GT-905 does because it's actually a 2 port managed switch. It does do some basic VLAN stuff too, but I think only 16 VIDs can be defined. QinQ too, IIRC. Y

Re: [AFMUG] SAF SFP compatibility with Mikrotik ccr1072

Is SAF vendor locking their SFP cages? If not, then you don't need to use their SFPs. But I guess from a support perspective, you'd probably want to use their SFP in their radios, so they can't blame the optic. But then they'll just blame the fiber or terminations or gear at the other end. It's

Re: [AFMUG] Internet speed issues

Teh innernets waas slow tooday. Must be cuz no NN now. And if it wasn't, it probably will be in the future. Because nothing ever breaks. Your ISP is just bad and wants to piss you off. That's pretty much what I got out of that article. These people are clueless. On 12/18/2017 11:28 PM, Rory

Re: [AFMUG] fiber/power on POPs

and a switch. What would you put at the bottom between the 48VDC rail and the run to the top?  A breaker?  A large-ish fuse? Josh On Fri, Dec 15, 2017 at 2:48 PM, George Skorup mailto:george.sko...@cbcast.com>> wrote: Get the Shireen DFP-1246. That has a red and a black 12AWG.

Re: [AFMUG] Our NN statment

One of our tech support guys asked me yesterday if we're going to start charging for access to Facebook, Netflix, etc. I was just like, dude, seriously? Yeah, cuz that will surely get us customers. He said, but now we can, so why wouldn't we? I said, but did we before NN? And then I realized he

Re: [AFMUG] Our NN statment

What happened before NN? Oh gee, there were standard business laws that took care of the shady tactics by the big guys. If anything, NN just made what they were doing legal if they put it in 1pt font on the last page of a contract. On 12/15/2017 2:57 PM, Mathew Howard wrote: Yeah, true, there

Re: [AFMUG] fiber/power on POPs

Get the Shireen DFP-1246. That has a red and a black 12AWG. And 4x single-mode fibers. You could do even one single run of that and 4x BiDi optics. Or a run for each radio if you're stuck with duplex optics. The reel is 500', so I would just do two dedicated runs. Bring it up to a small enclosu

Re: [AFMUG] Today's excitement

this before.   The currently-shipping control boards will always have this requirement, a future revision in where we hope to resolve this. On Thu, Dec 14, 2017 at 9:24 AM, George Skorup mailto:george.sko...@cbcast.com>> wrote: So you're saying the 450m supports negative voltage

Re: [AFMUG] Today's excitement

So you're saying the 450m supports negative voltage / positive ground? On 12/14/2017 10:19 AM, Sean Heskett wrote: its powering a 450m.  probably on a short cable with no subscribers attached sine it's only drawing 43.19watts - just a guess tho ;-) On Thu, Dec 14, 2017 at 8:48

Re: [AFMUG] Today's excitement

-52 volts. Nice. Wait... what is that powering at 820mA? I imagine the answer to this is no, but will the Cambium Sync compatible cards/injectors still do traditional Canopy Sync? Entirely different h/w, right? I hope I'm wrong. On 12/14/2017 2:49 AM, Forrest Christian (List Account) wrote: C

Re: [AFMUG] FCC licensing for dummies

A path operating >40MHz is already on the 80MHz channel plan, so you'll likely be fine going from 56/60 to 80. You do not want to be responsible for interfering with another licensee, like public safety would be bad. Increasing channel bandwidth is a definite coordination because it could lead

Re: [AFMUG] OT alt list

Holy shit you're old. More depressed now? ...ducking On 12/8/2017 6:22 PM, Chuck McCown wrote: Depressing, I have kids older than that... (where did I put my Metamucil) -Original Message- From: George Skorup Sent: Friday, December 08, 2017 5:06 PM To: af@afmug.com Subjec

Re: [AFMUG] OT alt list

Are you calling me old? I'll be 33 on Monday. Get off my lawn. On 12/8/2017 5:58 PM, Seth Mattinen wrote: On 12/8/17 15:43, George Skorup wrote: My one major complaint with the lists I'm on (here, various WISPA, and NANOG) is that some people refuse to start a new thread properly.

Re: [AFMUG] OT alt list

The OT stuff is fine. Whether it's marked [OT] or not, I don't really care. It's not hard to collapse a thread and delete it in Thunderchicken. My one major complaint with the lists I'm on (here, various WISPA, and NANOG) is that some people refuse to start a new thread properly. They will sim

Re: [AFMUG] Conditional-use permit for tower

m/thebrotherswisp> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> ---- *From: *"George Skorup" *To: *af@afmug.com *Sent: *Thursday, December 7, 2017 4:16:57 PM *Subject: *Re: [AFMUG] Conditional-use permit for tower One county we're in pulled th

Re: [AFMUG] Conditional-use permit for tower

One county we're in pulled that bullshit. We wanted to put up a 140'. They said nope, you're not a cell co. And we said neither is SBA that just built a tower 2 miles away without any permits whatsoever. Or how about American Tower? Or the tower asset holding companies that the cell co's own? N

Re: [AFMUG] 900mhz 450i make sense to deploy?

are nearly worthless because the noise floor has gone up so much in certain areas (I'm assuming smart grid, but I haven't actually verified that). On Thu, Nov 30, 2017 at 12:34 PM, George Skorup mailto:george.sko...@cbcast.com>> wrote: We've got

Re: [AFMUG] 900mhz 450i make sense to deploy?

We've got about 10 450i 900 APs up now. We tried Baicells at most of those sites. I'm talking stupid dense trees. Made it two blocks in a small town and RSRP dropped off to -120. Plus that was back when you couldn't turn down the Tx power on the eNB. It was the full 1W per port, so we were stil

Re: [AFMUG] ePMP2000 bug

Lite AP to Full upgrade and the flash experiences some corruption so the license key can't be found/loaded? That scenario isn't unique to ePMP though, happens on Canopy gear as well. Had a handful or two of those over the years. If it's under warranty and Cambium wants it back, replace with a s

Re: [AFMUG] 11 mile 11ghz gigabitish

820C or 2+0 820S On 11/28/2017 4:38 PM, Steve Jones wrote: thanks, I just sent out a request to the reseller still interested if there are any other solutions out there similar in cost though On Tue, Nov 28, 2017 at 4:25 PM, Sean Heskett > wrote: with the integr

Re: [AFMUG] ePMP puzzle

St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> On Mon, Nov 27, 2017 at 10:29 AM, George Skorup mailto:george.sko...@cbcast.com>> wrote: I would also recommend R3.5. I've had significantly less issues with that.

Re: [AFMUG] ePMP puzzle

I would also recommend R3.5. I've had significantly less issues with that. On 11/27/2017 9:22 AM, Larry Smith wrote: Well darn, that appears to have been the issue. Tried from a different machine (that I have never accessed this radio from) and it worked fine. Thanks.

Re: [AFMUG] PPS limits

I've seen several DDoS attacks targeting the Xbox shit talking kids. The normal garbage UDP floods >100k PPS doesn't seem to affect CCRs all that much. The last time the CPU jumped from 3% to maybe 10%. But recently I saw an ICMP flood type attack (yet again targeting the Xbox dipshits). The CC

Re: [AFMUG] PMP 100 Sessions and Reg Counts

Are you seriously still running 11.2 or 12.1? What version is the AP on? There was a timing bug for a very long time that was fixed with the final 13.4.1 release. There *is* a difference between power port and timing port sync prior to 13.4.1. The difference between a reg and a re-reg is very

Re: [AFMUG] Negative Voltages...

I've seen licensed PTP gear rated -36 to -72. I think that's a little bit generous. Probably -40 to -60 would be OK. But maybe -65 or so for very aggressive rectifiers wouldn't be a bad idea either. On 11/9/2017 2:03 PM, Robert Andrews wrote: 33.6 top equalize for 24 v   62.4 top equalize for 4

Re: [AFMUG] Cambium forums berserk?

Yeah, looks like the whole site is all screwed up. On 11/8/2017 2:23 PM, Josh Luthman wrote: http://community.cambiumnetworks.com/t5/cnMaestro/Microtik-Routerboard-DHCP-configuration-for-onboarding-devices/m-p/56012#M26 Looks all squashed to me on IE and Chrome.  Anyone else having this issu

Re: [AFMUG] ePMP CnMaestro URL via Option 43

Of course you do have to update the SMs to 15.1+ first. On 11/7/2017 3:37 PM, Adam Moffett wrote: 450 might be the only system that really nailed that. -- Original Message -- From: "George Skorup" <mailto:george.sko...@cbcast.com>> To: af@afmug.com <mailto:af

Re: [AFMUG] ePMP CnMaestro URL via Option 43

This is kinda moot to me since ePMP can't do ICC like Canopy. So we have to pre-config ePMP SMs anyway (so that our WPA key matches for registration), so we might as well set the cnMaestro URL while we're at it. Maybe it's useful in case you want to change the URL or something I guess. The 45

Re: [AFMUG] cheap patch cables

I use these in 1, 2 and 3 foot: https://www.monoprice.com/product?p_id=2125 Haven't had any bad ones in >1k. The boots aren't too stiff in the cold unlike some others I've used in the past. On 11/7/2017 11:41 AM, Jay Weekley wrote: Monoprice is somewhat cheaper. Lewis Bergman wrote: Amazon

Re: [AFMUG] Sprint testing TELRAD?

Are you sure it's 3.65? 2.5 would be more likely. On 10/28/2017 11:28 PM, TJ Trout wrote: On one of my low level roof top sites I noticed sprint (old clearwire/clear site) has a 4" round by 4ft tall round (omni?) connected to a telrad radio only using 2 of the 4 ports... What would they be us

Re: [AFMUG] Considerations for upgrading passed SAF Lumina link

I have exactly 1 SAF Lumina link, 6GHz at 30 miles, that does ~360Mbps (56MHz/256QAM weak-FEC ACM). I have fiber on both sides of this link, so the full-duplex is needed. And even if it wasn't, I'd still want it for the sub-millisecond latency, and rain fades on other paths causing traffic reve

Re: [AFMUG] OT: Good Weather App/site

I haven't noticed too many problems with the Android app. Once you start the radar loop, it does take a few seconds to buffer some frames. OTOH, the website is a piece of shit. Ads galore. Those alone are half the loading time. Waiting on Google Analytics this, DoubleClick, that. It reminds me

Re: [AFMUG] Baicells power and data connectivity

s. -- Original Message -- From: "George Skorup" <mailto:george.sko...@cbcast.com>> To: af@afmug.com <mailto:af@afmug.com> Sent: 10/24/2017 1:33:54 PM Subject: Re: [AFMUG] Baicells power and data connectivity Traco BCMU. PacketFlux 5ch PDU. Current limit conservatively

Re: [AFMUG] Baicells power and data connectivity

Traco BCMU. PacketFlux 5ch PDU. Current limit conservatively at 1500mA, could probably drop it to 1000. Each eNB pulls about 650 @ regulated 48VDC. New stuff, especially when the new eNB comes out, my plan is to start using a real rectifier, DC and fiber to any radio I get it to. The cool thin

Re: [AFMUG] Baicells power and data connectivity

, "George Skorup" <mailto:george.sko...@cbcast.com>> wrote: Two cat5's. One obviously to the data/WAN port. The other, two pairs positive, two pairs negative. Nothing else. We did try a GigE-POE-SS (top) and GigE-POE-APC (bottom). Power worked fine, but couldn

Re: [AFMUG] Baicells power and data connectivity

Two cat5's. One obviously to the data/WAN port. The other, two pairs positive, two pairs negative. Nothing else. We did try a GigE-POE-SS (top) and GigE-POE-APC (bottom). Power worked fine, but couldn't get the etherlink link to come up. It was about 290 feet of cable. The eNBs have built-in SS

Re: [AFMUG] Apple and AT&T activate LTE Band 8 to give iPhone users in Puerto Rico cellular service by Loon Balloon | TechCrunch

902-928 is primary radio-location, secondary hamateur, and tertiary ISM in the US (and Canada?). But yeah, most of the rest of the world it's licensed which is why you typically see lots of antennas for 800-960. So about that primary. We had a railroad beacon two blocks away from one of our to

Re: [AFMUG] AF24 max distance rain zone K

I have a couple AF24 (non HD) links around almost exactly a mile. And a few more between 2.1 and 2.8 miles. The 1 mile links are obviously better in the rain, but they all drop out in heavy storms. 1 mile maybe 10 minutes, 2+ miles anywhere between 20-40 minutes depending on the intensity. This

Re: [AFMUG] Best Radios (Licensed) for 2 gig

For 22 miles, you're probably looking at lower 6GHz. If you can get two 60MHz channel pairs both in H & V, I believe you can do dual PTP820C/IP20C's at each end for a little over 2.2 (2.4?) Gbps full duplex. Been a while since I looked at all of the different supported configurations though, so

Re: [AFMUG] IPv6 for management

IMO, dual stack or forget IPv6 entirely. On 10/19/2017 6:20 PM, Forrest Christian (List Account) wrote: So, after the response to me mentioning https:// for device management, I figured I'd ask about the following: How about IPv6?   It's on my list as well to look at... Does anyone see any re

[AFMUG] Stupid MikroTik SNMP

I know Nate has mentioned this before. Wondering if there's a solution. This has been driving me nuts for years. A large/complicated OSPF design may have some asymmetric paths between A and Z. But the problem comes down to asymmetry at the router you're trying to poll. For example, SNMP pollin

Re: [AFMUG] IgniteNet Metrolinq

Yeah, what he said. On 10/19/2017 2:08 PM, ch...@wbmfg.com wrote: Depends on the gain.  A 10 footer is always hard. *From:* Adam Moffett *Sent:* Thursday, October 19, 2017 1:03 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] IgniteNet Metrolinq Except 6ghz at 13km isn't very hard at all. -- Ori

Re: [AFMUG] IgniteNet Metrolinq

Yeahbut what size antenna? Try a 10+ footer that's <1 degree 3dB beamwidth. On 10/19/2017 2:03 PM, Adam Moffett wrote: Except 6ghz at 13km isn't very hard at all. -- Original Message -- From: ch...@wbmfg.com To: af@afmug.com Sent: 10/19/20

Re: [AFMUG] Cabinets with AC and heat

Surplus market? You're down there in Texas, maybe see what Bison Profab can make for you and go pick up a bunch at once? On 10/18/2017 11:44 PM, Lewis Bergman wrote: I have a few projects coming up that will require some cabinets. After looking about I find that they are still rediculously expe

Re: [AFMUG] Favorite https: cert implementation for managed gear

HTTPS is the least of my concerns for on-net gear. If I'm remote, it's over an IPsec VPN to the NOC. And the other reasons stated for HTTPS management on devices with self-signed certs, screw that. On 10/18/2017 8:35 PM, Seth Mattinen wrote: On 10/18/17 5:36 PM, Steve Jones wrote: talking to t

Re: [AFMUG] parsing PCN notices

I see 11GHz PCNs out of Ohio occasionally. That happens because IIRC, the coordination radius is 125 miles, but also 250 miles +/- 2.5 (or 5?) degrees on the path azimuth. It seems excessive, and it probably is, but that's the way it has worked for decades. On 10/17/2017 9:21 AM, Steve Jones w

Re: [AFMUG] Unbound DNS server with Raspberry Pi

the very light load I'd need it to do. On 10/16/2017 11:03 PM, Robert wrote: Is anyone else worried about the C2758  ( C2K ) problems with the atom chips?   I keep waiting for a decent availability of C3K chips to start upgrading systems On 10/16/17 5:56 PM, George Skorup wrote: I

Re: [AFMUG] Unbound DNS server with Raspberry Pi

I'm running several Supermicro 5018A-FTN4's. That's an 8-core Atom. 16GB of RAM. CentOS 7. And named uses like 3% of the CPU. Looking at one of them, it's hitting about 400 PPS. Using Torch anyway. The named process is using about 350MB of RAM. I've got 4 of these in an anycast config. So this

Re: [AFMUG] Batt Prices

I had a pair of Optima yellow top's on an APC 1400RM2U for about 7 years. One developed a bad cell. The other is still working fine in one of the work trucks today. :) Those are AGM. Was the cheapest option at the time. On 10/14/2017 8:03 PM, Chuck McCown wrote: Right, cheap flooded cells. *F

Re: [AFMUG] ethical delimma?

Your cards just happen to be the same form-factor. So... so what? On 10/14/2017 3:22 PM, ch...@wbmfg.com wrote: My line of APC surge suppressors got invented because someone got hit by a storm at their NOC and everything was fried.  And everything was protected by the APC rack mount surge suppr

Re: [AFMUG] ethical delimma?

I've used 10G copper DACs. I won't buy a RJ45 10G server, switch, AP, whatever. Ever. SFP+ or I'll buy something else. On 10/14/2017 3:40 PM, Mathew Howard wrote: The new Ignitenet stuff can do 2.5gig over copper, but I can't imagine there's much demand for 10 gig in the wireless world... m

Re: [AFMUG] ethical delimma?

Yeah. Fiber or GTFO. On 10/14/2017 3:33 PM, Jay Weekley wrote: Is there much demand for 10 gig over copper for the wireless world? Sent from my Verizon 4G LTE smartphone Original message From: ch...@wbmfg.com Date: 10/14/17 3:22 PM (GMT-06:00) To: af@afmug.com Subject: [AF

Re: [AFMUG] Heliax substitute

RFS has Heliax-like cable. Last time I messed with it, it's not exactly the same, so don't expect Andrew connectors to fit perfectly. On 10/9/2017 11:40 AM, Chuck McCown wrote: Not a problem.  Much easier to work with too. *From:* Jaime Solorza *Sent:* Monday, October 09, 2017 10:35 AM *To:* An

Re: [AFMUG] Airfiber 24HD One Chain Bad?

Could be bad Rx or possibly Tx at the opposite end. Or alignment like this one I have, which I know one end is slightly out and I just haven't bothered fixing it yet. Probably end up going 18GHz on this anyway, because >1 mile and 24GHz sucks here. On 10/6/2017 7:35 PM, Sterling Jacobson wro

Re: [AFMUG] Airfiber 24HD One Chain Bad?

No screenshot/attachment came through. The AF5/24 will only show one polarity when it's running SISO for whatever reason. Like alignment, noise, etc. I've heard of cases where the Tx or Rx is dead at one end on one polarity only, so that's certainly possible. On 10/6/2017 7:28 PM, Sterling J

Re: [AFMUG] Vegas Mass Shooting

y narrowband. If you come from analog wideband to narrowband digital it all sounds like crap. You get used the the difference and there is no issue understanding words or intent. In short; everything sounds better wide band, there is no wide band, get over it. On Wed, Oct 4, 2017 at 5:05 PM Georg

Re: [AFMUG] Vegas Mass Shooting

P25 Phase-I uses the IMBE vocoder. Yeah, that kinda sounds like shit. Phase-II uses the AMBE+2 vocoder, but then you have the TDMA split into two time slots, i.e. half the bandwidth. Still better than IMBE. DMR/TRBO is also 2-slot TDMA using AMBE+2. I use it and don't think it sounds that bad a

Re: [AFMUG] Vegas Mass Shooting

t;> wrote: 59 dead, 527 injured,. 18 more guns found at one home with thousands of rounds plus electronics of some kind. On Oct 2, 2017 1:30 PM, "George Skorup" mailto:george.sko...@cbcast.com>> wrote: s/clip/magazine

Re: [AFMUG] Vegas Mass Shooting

s/clip/magazine Sorry Bill, had to. On 10/2/2017 12:34 PM, Bill Prince wrote: Based on what I heard (so far), it had to take many minutes; maybe 15 or 20 or so. From the sound, you could hear what sounded like automatic weapon fire going and going until the clip was empty (and it sounded li

Re: [AFMUG] IPv4 - IPv6 Box

e following: We can cease to acquire new IPV4 addresses. Able to access IPV4 addresses if there is no V6 DNS for a URL. Customers apps will work flawlessly. So, I do not want to dual stack if it means I have to keep getting more V4 addresses. If I can use private IP space for dual stack, fi

Re: [AFMUG] IPv4 - IPv6 Box

What does that "box" do that DNS64+NAT64 doesn't? What's the resistance to regular old dual stack, even if you gotta do IPv4 NAT/CGN due to lack of address space? I'd be hesitant with DNS64/NAT64 w/ IPv6 only clients simply because of dumb customer devices. Dual-stack seems to be the safer, l

Re: [AFMUG] THANKS FEDS FOR SCREWING ME

I sent Gino a PacketFlux generator control board earlier this year, or last, I forget. Had to fill out customs docs. Can't remember if it was UPS or FedEx. We called and the rep was like, yeah, you gotta do that. That's some stupid ass shit. On 9/30/2017 9:32 AM, Chuck McCown wrote: Confiscat

Re: [AFMUG] Ben Moore, ubnt, fix your documentation of basic things!

I would expect a GigE radio to haul 9000+ byte frames, but you never know. So yeah, it needs to be on datasheets. On 9/28/2017 8:26 PM, Eric Kuhnke wrote: so put it in the documentation, then... :-) On Thu, Sep 28, 2017 at 1:48 PM, Chuck Macenski > wrote: Hi,

Re: [AFMUG] Wanna throw up in your mouth?

Neutrality! So yeah, I agree with you. -- Original Message -- From: "George Skorup" <mailto:george.sko...@cbcast.com>> To: af@afmug.com <mailto:af@afmug.com> Sent: 9/28/2017 1:25:29 AM Subject: Re: [AFMUG] Wanna throw up in your mouth? I thought half or mos

Re: [AFMUG] Wanna throw up in your mouth?

. It's certainly possible that I'm missing something though. On Wednesday, September 27, 2017, George Skorup mailto:george.sko...@cbcast.com>> wrote: I think Steve is saying, what was broken 4 years ago that needed NN to come fix it? On 9/27/2017 1

Re: [AFMUG] Wanna throw up in your mouth?

I think Steve is saying, what was broken 4 years ago that needed NN to come fix it? On 9/27/2017 10:08 PM, Josh Reynolds wrote: How so? It depends on which session. Sometimes we at least had lube, or there was the threat of getting fucked, but we just hadn't been moved into the same cell block

af@afmug.com

Problem is, it'll still work. On 9/27/2017 9:59 PM, Steve Jones wrote: Unless i see that the web interface gives me enough insight into my consumption, i can guarantee this meter and every meter in my neighborhood will require visual readings. I have 3 alvarion 900mhz fhss access points and su

Re: [AFMUG] ePMP Release 3.5

Binary sucks. I never use it. I know I've used 2.6.2.1 JSON config files on 3.2.2, 3.3, 3.4.1 and 3.5. The only real problem I can recall right now is user accounts that are disabled. Take those out of the config file and it works fine. My latest sets our generic SM password for all four users

Re: [AFMUG] What do you monitor?

brotherswisp> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> -------- *From: *"George Skorup" *To: *af@afmug.com *Sent: *Friday, September 22, 2017 6:32:58 PM *Subject: *Re: [AFMUG] What do you monitor? Didn&#

Re: [AFMUG] What do you monitor?

estix> The Brothers WISP <http://www.thebrotherswisp.com/> <https://www.facebook.com/thebrotherswisp> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> -------- *From: *"George Skorup" *To: *af@afm

Re: [AFMUG] What do you monitor?

RSL, MSE/SNR/CINR/etc, modulation/capacity if supported, incorrect block counter if supported, IDU and/or ODU temperature. Lumina also supports voltage and current. Ethernet counters, traffic, errors, etc. Some radios wrap CRC or FCS errors into the IF-MIB Rx error stat. Others it's a separate

Re: [AFMUG] PMP450 5ghz AP possible case water intrusion

I've seen some that most certainly let water in through the gore vent. One such instance was rain blowing sideways for 20 minutes in a bad storm. That probably occurred because the radio was a little over 2 years old and the coating on the gore patch thing was gone. Basically just some mesh stu

Re: [AFMUG] attn: ben moore ; robert pera

So is Matt Hardy not at UBNT anymore? On 9/21/2017 1:37 PM, CBB - Jay Fuller wrote: "�Ubiquiti has a bare-bones organizational structure, that�s key, so a lot of the red flags are coming from that point,� Kundozerov said. �They don�t have enough people, but that doesn�t make the

Re: [AFMUG] Looking for Triton or other 120 or 100 ft. SSV tower - New or Used

On the ground in Ft. Myers: http://usedtowers.com/product/140-ssv-rohn-self-supporting-tower/ or http://usedtowers.com/product/140-ssv-rohn-self-supporting-tower-2/ On 9/21/2017 12:08 PM, Paul McCall wrote: We have never built a Self-support tower. I have heard Triton is pretty good, but am o

Re: [AFMUG] Network Engineer Opportunity

Plus you'll have to learn to speak Cuban or hipster. .ducking On 9/19/2017 11:49 PM, Steve Jones wrote: so the choices are fall off the continent into the ocean during an earthquake, or be blown off the continent into the ocean during a hurricane? On Tue, Sep 19, 2017 at 10:53 PM, Paul

Re: [AFMUG] Trango ODU

w.linkedin.com/company/midwest-internet-exchange><https://twitter.com/mdwestix> The Brothers WISP <http://www.thebrotherswisp.com/> <https://www.facebook.com/thebrotherswisp> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> --------

Re: [AFMUG] Trango ODU

brotherswisp> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> -------- *From: *"George Skorup" *To: *af@afmug.com *Sent: *Tuesday, September 19, 2017 7:03:41 PM *Subject: *[AFMUG] Trango ODU Sorry for the non-Friday post. Just cleaning up around the shop a bit. I hav

[AFMUG] Trango ODU

Sorry for the non-Friday post. Just cleaning up around the shop a bit. I have a Trango ODU that came from a broken ApexPlus OMU. Someone apparently dropped it and broke the N bulkhead off and cracked the PCB. The ODU was already removed. So the OMU went in the trash. I put this ODU onto anothe

Re: [AFMUG] OT: S10 Chevy heating issue

How do you know it's overheating? Does the service dummy light come on? It could just be a bad gauge or sending unit. Got a buddy with a scanner? Been a while since I screwed with a 4.3. I think there's a sending unit on the intake manifold and another on the driver's side head between two spa

Re: [AFMUG] FM radio colocation interference?

We're on about a dozen FM sites. Most are 3-6kW ERP, 1-3kW Tx. No issues on those. And then one 50kW ERP, 17kW Tx. No major issues, just some CRC errors. Got a 450 cluster here. The ethernet links have been up for 194 days and only two of the radios are showing about 3000 CRC errors. That's abo

[AFMUG] OT: PC upgrade

So I'm still running on my "vintage" i7-920/X58 system at home. I don't do a lot of gaming. Maybe BF4 once in a while. Got 6GB of RAM and a WD SATA3 spinner in it and it's fine for the most part. Upgrade right now to an i7-7700/Z270 (which is twice as fast as the 920/X58 and uses 1/3 of the po

<    1   2   3   4   5   6   7   8   9   10   >