I found a nifty case that just fits the KX-1, paddle, 28' random wire on
a flat cardboard spool, 40 and 20m counterpoise wires on spool, a big
machine nut for throwing the wire and a sheet of paper explaining that
the KX-1 is not a weapon. It's the current run of toiletries cases from
long
I found a nifty case that just fits the KX-1, paddle, three pieces of wire
on two flat cardboard spools, a big machine nut for throwing the wire and a
sheet of paper explaining that the KX-1 is not a weapon. It's the current
run of toiletry kits from long Virgin Atlantic flights. Beige,
Thank you, Mike, for the solution to the problem, at least in my
environment!
For readers who may not know how to apply your insight, here are some
hints. (Experts may delete this message now.)
I use Mozilla V1.6 as my mail user interface program. In this program,
Message Filters management
Check out the K6XX special, dual K3 shelf used at R31A:
http://sites.google.com/site/rtavan/amateurradio/k6xx-dual-k3-shelf
The photos were not intended to illustrate the majesty of this
ultra-portable shelf but if you squint you should get the idea. The
requirements were to:
1. Support two
standards for
new rigs will be merited. Some may balk at that, but note that we are no longer
allowed to operate spark, much to everyone's satisfaction.
Rick
--
Rick Tavan N6XI
On Sep 12, 2012, at 9:18 PM, Matt Zilmer mzil...@verizon.net wrote:
Phase noise and key clicks are the enemy. I
They're working well for me in light duty so far.
Rick
--
Rick Tavan
iPhone
On Oct 21, 2012, at 10:36 PM, hawley, charles j jr c-haw...@illinois.edu
wrote:
I am using PowerEx IMEDION AA 2400mAh. Same claims as the Eneloop and seem to
be as good or better if you believe the reviews.
Anyone
This evening while operating remote and trying to fight a radar intruder I made
frequent excursions in and out of NB. Although I could hear the transitions
immediately, often the NB icon on the display did not appear. Sometimes it
did appear but many seconds after the button press. HOLDing NB
How does the iMic work with iPad? The description shows it as USB to audio
connectors. No Apple docking connector.
Rick N6XI
On Jun 1, 2011, at 6:23 PM, Peter Wollan peter.wol...@gmail.com wrote:
Faberacoustical.com reports that this simple line-in only works with
iPhone, not with iPad.
Yeah, they listen instead of sleeping...
On Jun 20, 2011, at 10:09 PM, Matt Zilmer mzil...@verizon.net wrote:
Eric and Wayne are *always* listening. It's part of their charm.
73,
matt W6NIA
On Tue, 21 Jun 2011 14:19:52 +1000, you wrote:
I think this would be a very good feature
to build if you can handle a soldering
iron.
Have fun!
Rick N6XI
--
Rick Tavan
On Jan 29, 2012, at 3:49 PM, Frank MacDonell kd8...@gmail.com wrote:
I am interested in getting into CW contesting and have seen reference to
the Winkey Keyer by K1EL. My Rig is an Elecraft K3 and I use N1MM
The WARC bands should be quiet
Rick N6XI
--
Rick Tavan
iPhone
On Feb 19, 2012, at 10:16 AM, kevinr kev...@coho.net wrote:
Hello,
Due to whichever contest is dominating the bands the Elecraft CW
Nets will be cancelled for this week.
See you all next Sunday.
73,
Kevin
a good, ratchet and die crimper at the other QTH which I'll try next but if
anyone has good advice, please speak up.
Thanks,
/Rick
--
Rick Tavan N6XI
Truckee, CA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
If you tune the antenna to low SWR, as you did, then you don't need the
internal ATU. Set it to Bypass and be happy. Use the ATU only with poorly
matched antennas.
73,
Rick
--
Rick Tavan
On Jun 16, 2013, at 2:08 PM, Bill Blomgren \(kk4qdz\)
billblomg...@yahoo.com wrote:
Well.. I have
Or consider sticking with batteries using the inexpensive and tiny PST-3P10
charger on the same page at Mtechnologies. I haven't used it but the specs look
good.
Rick
On Jul 4, 2011, at 3:09 PM, Wayne Burdick n...@elecraft.com wrote:
Thanks, Randy. This is even smaller than the MFJ-4103.
And if it doesn't work the first time, try a few more times.
Rick N6XI
On Jul 7, 2011, at 4:19 PM, Mike n...@nf4l.com wrote:
The instructions are also in the K3 Utility help file, and I suspect may be
newer. It
is recommended that the power off be at least 30 seconds, and if that doesn't
Another advantage of the AUX-ACC connection for some ops is the ability to
change bands using the KPA500 band buttons. I don't need them myself, but some
ops complained about the lack of band buttons on the small K3 panel. They
aren't likely to buy a KPA for its band buttons, but if they want
There was a time when I really wanted a single switch (the infamous big
switch that one pulled at day's end) to turn on/off everything in the shack.
That was before almost everything embedded a CPU. Now I'm quite willing to
switch 'em all manually. If everything is on, that's less than a dozen
It will be huge. ;-)
Rick N6XI
On Aug 30, 2011, at 2:04 AM, Edward R. Cole kl...@acsalaska.net wrote:
It appears Elecraft is listening to what all us are wanting and
trying to give us a versatile little rig. I hope the order backlog
is not too long.
Don't hold your breath, but do check out the new compact beams from N6BT. I
haven't tried them yet and Tom is realistic about their comparison to full-size
Yagis, but they look quite appealing for field use and limited space situations.
Rick
--
Rick Tavan
On Oct 25, 2011, at 3:56 PM, Tony
Setting up my remote station today to return to the control site, I must have
jogged the hand key shorting bar or done something else to leave the KEY input
to the remote K3 actuated. Arriving at the control site, I get ERR KEY on power
up. Many controls work, but the VFO B display is
Belay that question. The audio stream is fine. I had a switching problem at
the control site, now fixed. I can continue my network testing. Sorry about
the bandwidth.
/Rick
On Sat, Feb 8, 2014 at 9:47 PM, Rick Tavan r...@tavan.com wrote:
Setting up my remote station today to return
I'm having intermittent problems with pops in the audio stream from my remote
K3 to my control site. They sound like brief, sub-second audio stream outages.
When it's bad, it's several pops per second for 10-30 seconds, then clean
operation for a minute or three. I've had some reports of
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
How does the KAT500 decide what Mode to set when it powers up (with or without
a K3 connected and running) or when it detects a band change? I ask because
several times recently mine has come up in Auto mode which I never use
intentionally. I would like a way to lock it into Manual mode. Yes, I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
station.
Rick N6XI
--
Rick Tavan
iPhone
On Dec 4, 2014, at 4:58 AM, Stan Stockton wa5...@gmail.com wrote:
I just tried N1MM in SO2V mode using a K3 with Sub Receiver. Everything
works fine.
Now introduce RemoteRig. Connected to the remote K3 a thousand miles away,
when I press Control
The P3 FixMode menu provides a great set of optional algorithms for what
happens when you tune the radio beyond the current SPAN. I usually use Half
Span which is great until it eventually moves a display edge below or above the
current ham band. Although that would be fine for SWLing outside
Does the KAT3 have an equivalent to the Edit Configuration window in KAT500
Utility? I'm thinking specifically of functions like the VSWR Threshold for
bypass and autotune. I don't see it in K3 Utility and I don't think there is a
KAT3 Utility. I probably knew the answer to this years ago and
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
All of a sudden, my SteppIR stopped tracking my K3 even though the SteppIR
controller was in General Mode. This has been working for years and I had made
no recent changes to cabling. I confirmed that CONFIG AUTOINF was set to Auto
1. Then I ran a logging program that polls the radio and the
styles of AUTOINF misbehavior, not readily reproducible.
I'm off to the other QTH now for a few days and won't be able to work on it but
will try to characterize it better when I get back.
Meanwhile, if others have seen errant AUTOINF operation, please let me know.
Thanks,
Rick
--
Rick Tavan
BandAide is pretty versatile itself. You can use position B to select an
alternative 80M antenna. It's manual and requires some external steering but
you probably don't switch between cw and Ssb all that often.
Rick
--
Rick Tavan
iPhone
On Aug 1, 2015, at 11:12 AM, Brian F. Wruble bwru
gain at zero, which is where it often sits when I'm there in person, then
every time I try to use the sub, its volume goes to zero and I have to
wiggle the knob at the control site. Is there any reason not to keep track
of last gain settings and maintain them?
Thanks,
/Rick N6XI
--
Rick Tavan
__
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support thi
ilman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rta...@gmail.com
>
--
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to li...@subich.com
>>
>> ______
> Elecraft
an.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rta...@gmail.com
>
--
to:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rta...@gmail.com
>
--
Rick Tavan
Truckee, CA
__
Elecraft m
I just started up my K3-K3 RemoteRig setup and got E 040AA8 in the VFO A area and a
perpetually scrolling, puzzling message "UPDATE K3 UTILITY" in the VFO B area.
I power-cycled the rigs and all was well. I've had a number of other, similarly puzzling
but different startup glitches recently
_
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.ht
| it. | 16345 Englewood Ave
> www.pwpconsult.com | - Scott McNealy | Los Gatos, CA 95032
>
>
> __
> Elecraft mailing list
> Home: http://mailma
four months, I had abandoned WriteLog,
> and I've never looked back. It wasn't the cost, it was the features!
>
--
Rick Tavan
Truckee, CA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailma
net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rta...@gmail.com
>
--
Rick Tavan
Truckee, CA
__
Elecraft mailing list
Home: http://
p://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rta...@gmail.com
>
--
Rick Tavan
Truckee, CA
___
remotely until I visit the site and twiddle
key lines. Once it happens, it doesn't clear itself through remote power
cycling or anything else I've tried. Any ideas here?
Thanks,
Rick N6XI
--
Rick Tavan
Truckee, CA
__
Elecraft mailing list
://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rta...@gmail.com
>
--
Rick Tavan
Truckee, CA
_
dGltZQMxNDY5NDc2OTI4>
>2
>
> [image: Yahoo! Groups]
> <https://groups.yahoo.com/neo;_ylc=X3oDMTJlZm8xbnB0BF9TAzk3MzU5NzE0BGdycElkAzc0NTIwOTQ3BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDZnRyBHNsawNnZnAEc3RpbWUDMTQ2OTQ3NjkyOA-->
> • P
SIP 5088
All port forwards are set the same for both internal and external use, both
TCP and UDP protocols, LAN address of the RRC.
Is something missing? Any suggestions?
Thanks,
/Rick N6XI
--
Rick Tavan
Truckee, CA
__
Elecraft
to change the dial speed/display
> resolution when tuning around.
>
> On Tue, Feb 21, 2017 at 5:10 PM Rick Tavan <r...@tavan.com> wrote:
>
>> I was several releases back and just installed this beta so my question
>> probably applies to an earlier release.
>>
&g
In fact, it appears I replied to the wrong thread. Please ignore. I'll QSY
to the PX3 beta firmware thread. Sorry for the b/w.
/Rick
On Tue, Feb 21, 2017 at 5:22 PM, Rick Tavan <r...@tavan.com> wrote:
> Sorry, Aaron, I wasn't clear. I'm talking about the freq displays on
wNTA2MzEwOARzZWMDdnRsBHNsawN2Z2hwBHN0aW1lAzE0ODc1Mjg0NTI->
>
>- New Members
>
> <https://groups.yahoo.com/neo/groups/KX3/members/all;_ylc=X3oDMTJncDlucTUzBF9TAzk3MzU5NzE0BGdycElkAzc0NTIwOTQ3BGdycHNwSWQDMTcwNTA2MzEwOARzZWMDdnRsBHNsawN2bWJycwRzdGltZQMxNDg3NTI4NDUy>
>12
>- New Photos
>
> <https://groups.yahoo.com/neo/groups/KX3/photos/pho
net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rta...@gmail.com
>
--
Rick Tavan
Truckee, CA
___
ailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rta...@gmail.com
>
--
Rick Tavan
Truckee, CA
__
El
Remote firmware, both
K3 Utility and the logger connect to the local K3 just fine from the
virtual Windows OS. I'm running FW Rev 5.55 on both K3's.
Any ideas?
Thanks,
/Rick N6XI
--
Rick Tavan
Truckee, CA
__
Elecraft mailing list
Home
On my Win 7 machine, the RemoteRig box presents three (maybe four) virtual COM
ports that identify themselves as Microbit Virtual COM ports in the Device
Manager Ports listing. I just set up a Win 10 machine and the virtual ports
materialize when I plug in the RRC-1258, but they appear as
this email list: http://www.qsl.net/donate.html
> Message delivered to rta...@gmail.com
>
--
Rick Tavan
Truckee, CA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/m
q.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rta...@gmail.com
>
--
Rick Tavan
Truckee, CA
___
_
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate
een
> or resizing them very frustrating. Controlling rotators works OK but you
> need to cultivate a high degree of patience with the mouse.
>
--
Rick Tavan
Truckee, CA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
lecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rta...@gmail.com
>
--
Rick Tavan
Truckee, CA
__
Elecraft mai
___
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: htt
pany name is usually unedited.
>
> If you specify "UPS Brown" and the shipper follows instructions, you'll
> get the package from UPS, not through the Post Office.
>
> This cheaper service is only available to larger shippers. It's not
> available to consumers.
>
> 73
: http://www.qsl.net/donate.html
> Message delivered to ct...@ewnetinc.com
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mail
elp: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rta...@gmail.com
>
--
Rick Tavan
Truckee, CA
__
ailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rta...@gmail.com
--
__
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://ww
- RF GAIN ADJ (probably unnecessary in the field with lousy antennas)
In the field I would probably change PF4 to BKLIGHT ON/OFF.
Any better ideas?
73,
/Rick N6XI
--
Rick Tavan
Truckee, CA
__
Elecraft mailing list
___
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: htt
Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Mess
Did you recently upgrade to a KIO3B? Do you have a left-over KIO3 in
working order that needs a new home? If so, please reply directly (off
list).
Thanks & 73,
/Rick N6XI
Rick Tavan
Truckee, CA
__
Elecraft mailing list
Home:
on and
off work properly. Any ideas?
Thanks,
/Rick N6XI
--
Rick Tavan
Truckee, CA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
that K3 Config Menu displays KIO3b and set RS232 to Usb. Any
idea what we missed?
Thanks & 73,
/Rick N6XI
--
Rick Tavan
Truckee, CA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
to be effectively blanked. Your noise sources may be in
that category. I don't think it is fair to say the K3 NB "doesn't work." It
certainly does work on many kinds of noise. No NB that I have tried or
heard of can work on all kinds of noise.
73,
/Rick N6XI
Rick Tavan
Truckee, CA
O
not and have a problem, note that many VGA
switches don't switch all 15 lines.
73,
/Rick N6XI
Rick Tavan
Truckee, CA
On Tue, Oct 10, 2017 at 2:16 PM, Dan AE9K <d...@ae9k.com> wrote:
> In preparation for the arrival of my KPA1500 I was wondering if a simple
> two-port VGA switch would
Unfortunately, that coupon code is only good for print books. Many of
Fred's books are e-book only. Good for Fred! Technical manuals are great as
e-books because they are searchable and "weightless." But the discount
doesn't appear to apply.
73,
/Rick N6XI
Rick Tavan
Truckee, CA
O
You can switch an external speaker (or two) between the radio and the RRC.
You might need a little amplification, depending on the efficiency of the
chosen speaker(s). Powered computer speakers should do nicely.
/Rick N6XI
Rick Tavan
Truckee, CA
On Mon, Nov 20, 2017 at 12:31 PM, Fred Jensen
in the house. I suspect they're
all managed by delicate semiconductor chips that can't handle the pulses.
Keep that in mind while testing!
GL,
/Rick N6XI
Rick Tavan
Truckee, CA
On Mon, Nov 6, 2017 at 7:59 AM, Chuck Milam, N9KY <n...@arrl.net> wrote:
> Hi All:
>
> It looks like we took an
Any advice?
Thanks & 73,
/Rick N6XI
--
Rick Tavan
Truckee, CA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
It's a cool product, Fred. Answers below:
/Rick N6XI
Rick Tavan
Truckee, CA
On Fri, May 11, 2018 at 2:51 PM, Fred Jensen <k6...@foothill.net> wrote:
> Thinking of replacing my Pigknob [which doesn't work when I'm running
> remote] with a KPod. Couple of questions:
>
>
That means you've enabled the ATU but it deems SWR low enough (settable)
that Bypass is the appropriate setting.
/Rick N6XI
Rick Tavan
Truckee, CA
On Fri, May 18, 2018 at 4:45 PM, Richard Zalewski <dick.w...@gmail.com>
wrote:
> First question: Ant1 selected both the ATU in and ATY B
1500W, more into a dummy load
Rick Tavan
Truckee, CA
On Thu, May 17, 2018 at 5:59 AM, Roger D Johnson <n...@roadrunner.com>
wrote:
> What are users seeing for maximum power output on each band?
>
> 73, Roger N1RJ
>
>
> _
it. Windows Remote Desktop or Teamviewer do the same thing or
you can have a "long" serial port (cable or network device). When it
arrives, KPA1500 Remote will add client/server operation, pretty bar
graphs, and maybe more, but I'm surviving for now without it.
73,
/Rick N6XI
Rick Tav
, but I'm not familiar with them. In any case, it would require some
engineering at Elecraft. In the meantime, I keep an eye on output and tweak
the drive manually to stay both powerful and legal.
/Rick N6XI
Rick Tavan
Truckee, CA
On Thu, May 31, 2018 at 10:01 AM, j...@kk9a.com wrote:
> My KPA
by a soffit. Some folks even put up a false wall of paneling in
front of an existing wall that they can't dig in to.
GL,
/Rick N6XI
Rick Tavan
Truckee, CA
On Sat, Apr 28, 2018 at 12:59 PM, Dauer, Edward <eda...@law.du.edu> wrote:
>
> Thanks for the ideas, Mark. The remote s
the current fan setting at
power up and display it correctly intentionally. I don't know if that
setting is readable, though.
73,
/Rick N6XI
Rick Tavan
Truckee, CA
On Sun, Dec 24, 2017 at 9:32 AM, Michael Walker <va...@portcredit.net>
wrote:
> I run my KPA500 remotely... very
Control setting is saved in EEPROM and is sticky. It will be preserved
across power cycles.
And now I will spend some of my holidays updating the KPA programmer’s
reference.
It is a far better experience than going to the mall…
73!
Jack, W6FB
On Dec 24, 2017, at 2:28 PM, Rick Tavan &l
distances. KPA1500 is the most friendly amp I've used for remote operation,
whether that's across the room or across country.
73,
/Rick N6XI
Rick Tavan
Truckee, CA
On Thu, Jan 18, 2018 at 11:19 AM, Richard Thorne <rtho...@rthorne.net>
wrote:
> Will there be any software to monito
is a checklog but I sure had fun
generating it. Apologies to my NCCC friends - it was an inadvertent screw-up. I
had really intended to operate within the rules and contribute a few points.
73,
/Rick N6XI
--
Rick Tavan, Saratoga & Truckee
You got good advice on baud rate. Also, it's wise always to confirm proper
operation with K3 Utility first. If it doesn't connect, chances are N1MM
won't, either. Utility marches through speeds until it finds one that
works. MM requires a specific speed setting.
73,
/Rick N6XI
Rick Tavan
do about it except be aware. (Or maybe you can convince
all the hams in the contest to use RIT/XIT/CLAR instead of Split when
calling a simplex pileup? Good luck! And RIT/XIT/CLAR can provoke some
frequency anomalies of their own.)
73,
/Rick N6XI
Rick Tavan
Truckee, CA
On Tue, Feb 20, 2018 at 3
njoy or at least tolerate the
system integration!
73,
/Rick N6XI
Rick Tavan
Truckee, CA
On Fri, Feb 23, 2018 at 9:58 AM, Chris Hallinan <challi...@gmail.com> wrote:
> Any solutions for MAC out there?
>
> http://www.elecraft.com/k2_remote.htm#k3remote
>
> I use MacLoggerD
can move it at all! KPA1500 is a true breakthrough in weight for a
full-power amp!
/Rick N6XI
--
Rick Tavan
Truckee, CA
On Sun, Feb 25, 2018 at 10:59 AM, Jim Brown <j...@audiosystemsgroup.com>
wrote:
> I can't even lift, let alone carry, the 87As that are on my operating
> desk. I g
! ;-)
GL & 73,
/Rick N6XI
--
Rick Tavan
Truckee, CA
On Sun, Jul 29, 2018 at 3:35 PM, Peter Dougherty wrote:
> Once again this year I'm planning to visit friends over the Thanksgiving
> weekend. Unlike in the past, I won't be able to set up for CQWW-CW from
> where
> I'm stayi
Remote. If I'm operating remotely, I use the client
instance running on my local computer. So I only see and play with the dual
access capability when I'm in the shack (the "radio site") and
experimenting with the configuration.
73,
/Rick N6XI
--
Rick Tavan
Truckee, CA
On Mon, Aug 6, 20
, but then it never turns on the
remote radio. If I turn off the control K3 and then back on, it apparently
has forgotten it was in TERM mode.
Any advice?
Thanks,
/Rick N6XI
--
Rick Tavan
Truckee, CA
__
Elecraft mailing list
Home: http
harmed or prosecuted. The student hackers just wanted to prove they
could do it and, as far as I knew, never stole or damaged anything along
the way.
Thanks for the pointer.
/Rick N6XI
Rick Tavan
Truckee, CA
On Sun, Mar 4, 2018 at 2:06 PM, Al Lorona <alor...@sbcglobal.net> wrote:
> I found
time.
There are other vendors of similar devices. I believe there are also some
solutions involving remote serial ports but I have no experience with them.
Good luck & 73,
/Rick N6XI
--
Rick Tavan
Truckee, CA
On Tue, Mar 6, 2018 at 5:30 PM, Dennis Ashworth <dennisashwort...@gmail.com&
of poetic
justice. Don't count on it!)
/Rick N6XI
Rick Tavan
Truckee, CA
On Wed, Mar 28, 2018 at 7:41 PM, Phil Kane <k2...@kanafi.org> wrote:
> On 3/28/2018 5:43 PM, Rick Tavan wrote:
>
> Another thing to check for missing packages is your neighbors.
>>
>
> Good
no tracking
reports. If tracking was enabled, it's probably not in the neighborhood. GL,
/Rick N6XI
Rick Tavan
Truckee, CA
On Wed, Mar 28, 2018 at 5:10 PM, Don Wilhelm <donw...@embarqmail.com> wrote:
> Neil,
>
> I am sorry to hear about your experience with USPS. They are normally
>
the same facility to address other, unrelated devices at my radio site
as .ddns.remoterig.com:. It's slick!
73,
/Rick N6XI
--
Rick Tavan
Truckee, CA
On Fri, Mar 16, 2018 at 11:10 AM, Fred Jensen <k6...@foothill.net> wrote:
>
> The RRC will operate with a multitude of radios.
1 - 100 of 364 matches
Mail list logo