624317*
*Web: https://sulisconsultants.com/ *
Registered in England and Wales, number 05466247
*From:*Rick Linford
*Sent:* Wednesday, April 10, 2024 3:53 PM
*To:* EMC-PSTC@LISTSERV.IEEE.ORG
*Subject:* [PSES] German Required on Product Label to Match China and
Nordic for (GS) ?
Dear EMC-PSTC Pros
624317
Web: https://sulisconsultants.com/
Registered in England and Wales, number 05466247
From: Rick Linford
Sent: Wednesday, April 10, 2024 3:53 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] German Required on Product Label to Match China and Nordic for
(GS) ?
Dear EMC-PSTC Pros,
Specific
-German text is not important to
Germany?
China elevation and humidity waring is written into law and is very clear.
Is there an equivalent German law and or specific German text?
仅适用于海拔2000米以下地区安全使用
仅适用于在非热带气候条件下安全使用
Nordic countries grounded plug warning, is specific to national differences
Dear Colleagues,
Need help on China SRRC certification requirement.
To get a license from SRRC China Radio Type Approval.
One of the test items they need is a single carrier transmission
method.
Please help on how to do this test.
Regards,
Cecil Gittens
to the end user
(like cord and plug). Therefore I assume that CCC is not required for internal
switch mode power supplies that are not accessible to the user during normal
use. In case of doubt, I recommend to check with your local representative or
distributor/importer in China.
Kind regards
Hi Doug,
please be aware that line cords and plugs are subject to mandatory CCC
certification in the People’s Republic of China (cf. CHINA QUALITY
CERTIFICATION CENTRE-Notice and Bulletin
(cqc.com.cn)<https://www.cqc.com.cn/www/english/c/2023-02-09/559801.shtml>).
This means even i
Yes, I have had China Customs open a shipment of 10 powered speakers and find
one power cord was not from an approved manufacture on our critical components
list.
We were short one cord set so I had used an engineering sample… Had right plug
and cordage, just not on our products components list
: [PSES] Friday Question - Line Cords in China
I believe you are correct.
Simply shipping the wrong cord types to certain locations is actually
prohibited, and in general, including incorrect types could be viewed as
endorsement of their use in other areas. A thing that should be simple, now
between conductors.
From: Douglas Powell
Sent: Friday, August 11, 2023 7:00 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Friday Question - Line Cords in China
All,
I was talking with a client recently about shipping line cords to various
countries around the world and how some do
about shipping line cords to
>>> various countries around the world and how some do not allow the incorrect
>>> cords within a shipment while others do. Brazil, as far as I know, does not
>>> permit incorrect cordage. Argentina, Australia, and China (PRC) are all
>>
while others do. Brazil, as far as I know, does not permit incorrect
cordage. Argentina, Australia, and China (PRC) are all mutually exclusive.
South Africa and India are mutually exclusive. Japan, Taiwan, and the United
States are all mutually exclusive. If not prohibited, it is frequently cheaper
allow the incorrect cords within a shipment while others do.
Brazil, as far as I know, does not permit incorrect cordage.
Argentina, Australia, and China (PRC) are all mutually
exclusive. South Africa and India are mutually exclusive.
Japan, Taiwan, and the United Stat
h a client recently about shipping line cords to various
>> countries around the world and how some do not allow the incorrect cords
>> within a shipment while others do. Brazil, as far as I know, does not
>> permit incorrect cordage. Argentina, Australia, and China (PRC)
orrect cords
> within a shipment while others do. Brazil, as far as I know, does not
> permit incorrect cordage. Argentina, Australia, and China (PRC) are all
> mutually exclusive. South Africa and India are mutually exclusive. Japan,
> Taiwan, and the United States are all mutual
All,
I was talking with a client recently about shipping line cords to various
countries around the world and how some do not allow the incorrect cords
within a shipment while others do. Brazil, as far as I know, does not
permit incorrect cordage. Argentina, Australia, and China (PRC) are all
speculation, china will ship anything, that you ask for to be labelled.
Ir is the import requirements that are important.
And you are responsible to ensure that the labeling is correct.
Sucks to be you !!!
I spent several years in US customs monitoring programs because of a lack of
attention
Hi PSES team,I'm having difficulty finding information regarding China's
packaging (Product, Hazard, etc.) and shipping label requirements for
laboratory/control/measurement equipment.Most of the information I have found
is in regards to CCC mark, which our product are not in scope.Any
such as China and
Korea want to ensure it is correct along with USA FTC (Federal Trade
Commission) requirements.
Best Regards,
Ken Kapur
Director, Global Product Compliance
Thermo Fisher Scientific
ken.ka...@thermofisher.com
From: Mike Home
Sent: Tuesday, July 21, 2020 10:13 AM
To: EMC-PSTC
> On Jul 20, 2020, at 7:58 PM, sgbrody wrote:
>
>
> Hi fellow gurus,
>
> A client has asked me if China requires country of origin labels on imported
> products, specifically electrical manufacturing products and/or components.
>
> Any information greatly app
Hi fellow gurus,A client has asked me if China requires country of origin
labels on imported products, specifically electrical manufacturing products
and/or components.Any information greatly appreciated. Tou can respond openly
here or privately to me at stev
Hello Monrad,
Hong Kong still has a completely separate regulatory regime from China. You
will likely find importing to Hong Kong far simpler than Chinese approvals. As
far as I am aware, most products will not require marking for Hong Kong. It
will likely require minimal work if you don't
Does Hong Kong require the same EMC/Safety/RoHS approvals and labeling as
China? My focus is on regulation of automated data processing products like
servers, PCs, disk arrays, switches, power distribution units (PDUs) and rack
integrated systems. For example, China requires that servers
https://www.forbes.com/sites/rrapier/2019/08/04/why-china-is-dominating-lith
ium-ion-battery-production/#2b9d77883786
"According to the research organization <https://about.bnef.com/>
BloombergNEF, the volume weighted average lithium-ion battery pack price
(which includ
Hello List Members,
China has released their first catalog of equipment for RoHS. Previously
the China RoHS 2 regulations in China put just about everything in scope
with some exemptions for categories like space, power, military equipment,
etc. which was very similar to EU RoHS
s,
Ted Eckert
Microsoft Corporation
The opinions expressed are my own and do not necessarily reflect those of my
employer, PSES or IEEE.
From: Paasche, Dieter [mailto:dieter.paas...@christiedigital.com]
Sent: Friday, August 4, 2017 10:11 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] China Comp
, John [mailto:john.harring...@keithley.com]
Sent: Friday, August 04, 2017 10:21 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] China Compulsory Certificate
Can anyone recommend a company that can assist in securing a China Compulsory
Certificate for a part?
Thanks
John
John Harrington
EMC and
Can anyone recommend a company that can assist in securing a China Compulsory
Certificate for a part?
Thanks
John
John Harrington
EMC and Safety Compliance Manager
E/ john.harring...@keithley.com<mailto:john.harring...@keithley.com>
T/ 440.498.2727
tek.com<http://tek.com>
[Tw
All
My understanding is that current standard for China is "YY 0505-2012", which
is based on 2nd edition IEC 60601-1-2:2004.
Europe and North America currently require compliance with (versions of) 3rd
edition IEC60601-1-2:2007, and will be moving to 4th edition in 2018.
I h
Greetings from Berkeley,
I an writing to ask if anyone might know if China CQC plans to issue a GB
standard based on CISPR 32 or EN 55032:2012?
Thank you,
Chuck McDowell
Compliance Specialist
Meyer Sound Laboratories Inc.
NOTICE: This email may contain confidential information. Please
Posit this to a North American lab that has a physical presence in PRC.
Mandarin speaker probably required.
Only thing know is that China sent people to sit in on the first committee
drafts.
Brian
From: Chuck McDowell [mailto:chu...@meyersound.com]
Sent: Monday, October 12, 2015 9:54 AM
Does anyone know whether this updated standard includes requirements for
reduced spacings at high altitudes and more rigorous humidity testing, as we've
seen in other recent Chinese standards?
thanks,
Mike Sherman
Product Safety and Compliance Engineer
Graco Inc.
-
Some locations in China, particularly those near Shanghai, require
certification from the Shanghai Research Institute of Chemical Industry
(SRICI).http://www.msds.gov.cn/index.aspx?menuid=19type=introductlanmuid=98language=en
I can’t point to a specific regulation. As far as I know
Esteemed body of knowledge,
Today I learned about a China customs regulations requiring UN38.3 T1-T8
certification for all lithium batteries: Lithium-ion, Lithium-polymer, and
lithium-metal. This is applicable to single use as well as rechargeable
batteries. The certifications cannot
Hi Richard,
Yes, we have been dealing with this for awhile. For China shipments, the
testing must be done by one of the government approved labs. Even as a test
lab, we have to use the government lab down the street. If your shipment does
not have the correct certificate
) [mailto:jody.le...@sgs.com]
Sent: Wednesday, September 11, 2013 12:25 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] China Lithium battery regulations
Hi Richard,
Yes, we have been dealing with this for awhile. For China shipments, the
testing must be done by one of the government
] China Lithium battery regulations
Esteemed body of knowledge,
Today I learned about a China customs regulations requiring UN38.3 T1-T8
certification for all lithium batteries: Lithium-ion, Lithium-polymer, and
lithium-metal. This is applicable to single use as well as rechargeable
batteries
Gary,
China is the only region in the world that I am aware of with such regulations.
I agree with your assessment of the rest of the world.
Best Regards,
Jody Leber
Consumer Testing Services
Global Battery and Accumulator Technical Manager
Battery, Energy Efficiency and Safety Laboratory
: [PSES] China Lithium battery regulations
Jody,
Is it the case that you can, in the US, do the requisite crush tests etc, of
UN38 completely within you own facility and self verify the ATA requirements,
and do other regulators also accept in house data - rather than independent
verification
Hello group,
Where can I find the latest list of mandatory products that must be marked
with the China Energy Label (CEL).
Best regards
Helmut Koester
PSi Engineering GmbH
mailto:h.koes...@psi-engineering.de
-
This message
Hi Helmut,
The list has been updated for 9 times and will still be updated timely.
There are totally 29 products require China Energy Label now.
I have the list but it's in Chinese.
So maybe you can let me know your product and I can check whether it
requires CEL.
Paul Wang (王卫波)
GM Compliance
Paul Wang
Gesendet: Montag, 15. Juli 2013 15:15
An: h.koes...@psi-engineering.de; emc-p...@ieee.org
Betreff: 答复: China Energy Label: List of mandatory products
Hi Helmut,
The list has been updated for 9 times and will still be updated timely. There
are totally 29 products require China Energy Label
: China Energy Label: List of mandatory products
Hi Helmut,
The list has been updated for 9 times and will still be updated timely.
There are totally 29 products require China Energy Label now.
I have the list but it's in Chinese.
So maybe you can let me know your product and I can check whether
-si.de]
发送时间: 2013年7月15日 22:11
收件人: 'Paul Wang'; emc-p...@ieee.org
主题: AW: ´ð¸´: China Energy Label: List of mandatory products
Hello Paul,
We are interested to know if printers are inside this list of mandatory
products for CEL marking.
Regards
Helmut Koester
PSi Engineering GmbH
mailto:h.koes
China lithium battery transportation requirements must be tested in-country by
authorized labs.
Sent from my iPhone
Peter S. Merguerian
pe...@goglobalcompliance.com
Go Global Compliance Inc.
www.goglobalcompliance.com
(408) 931-3303
On Nov 9, 2012, at 11:31 AM, Crane, Lauren lauren.cr...@kla
Does anyone know what requirements apply to the transportation by air in China
of lithium button cells installed in equipment ?
I have one Chinese regulation à “Administrative Provisions on Transport of
Dangerous Goods by the Civil Aviation of China” (“中国民用航空危险品运输管理规定”), which
defines
Import of a product in Saudi-Arabia is not possible because on the product
label is printed made in PRC and while the certification body claims it must
be made in China.
Is there any reason why PRC (People's Republic of China) is not acceptable?
Best regards,
Kris Carpentier
Hi Kris ,
Not sure whether you will sell it to China or Saudi-Arabia.
If it's for China, I believe it should be printed in Simplified Chinese:中国制造
Paul Wang
-邮件原件-
发件人: emc-p...@ieee.org [mailto:emc-p...@ieee.org] 代表 Carpentier Kristiaan
发送时间: 2012年6月13日 17:04
收件人: EMC-PSTC
主题: Made
, 2012 2:04 AM
To: EMC-PSTC
Subject: Made in PRC or Made in China?
Import of a product in Saudi-Arabia is not possible because on the product
label is printed made in PRC and while the certification body claims it
must be made in China.
Is there any reason why PRC (People's Republic of China
434,475MHz
10mW
bandwith approx. 250kHz
Low Duty Cycle
Is such equipment allowed to operate in China? If not which frequency bands
are allowed?
Any support is appreciated.
Best regards
Dipl.-Ing. Michael Loerzer
Managing Director
Regulatory Affairs Specialist
Das neue
Hi Michael,
As I know the 800MHz SRD device in China is from 868MHz to 868.6MHz and should
be 5mW.
So you may need to change it.
Paul Wang (王卫波)
GM Compliance,Inc.Beijing Office
Tel:86-10-58203318
Tel:86-10-67877845
Fax: 86-10-58203316
Cell:86-13810026747
Website
ferquency 434,475MHz
10mW
bandwith approx. 250kHz
Low Duty Cycle
Is such equipment allowed to operate in China? If not which frequency bands
are allowed?
Any support is appreciated.
Best regards
Dipl.-Ing. Michael Loerzer
Managing Director
Regulatory Affairs Specialist
Das neue
-Original Message-
From: Charlie Blackham [mailto:char...@sulisconsultants.com]
Sent: Monday, April 02, 2012 2:43 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] CE mark for China?
Gary
The CE mark is, I believe, now trademarked.
Regards
Charlie
him of this habit, but
in the meantime he sent me this interesting little tidbit that claims there are
Chinese manufactures who think CE is China Export or China Electronics and
apply a very famous mark
http://en.wikipedia.org/wiki/CE_mark
Then select China Export in the table of contents
/sides/getDoc.do?type=WQreference=P-2007-5938language=EN
The answer includes:
The Commission is aware that there exists the misconception attributing CE
marking the meaning 'Chinese export'. The Commission is not aware of the
existence of a 'China export mark' but considers that the mark
: Wednesday, August 31, 2011 3:32 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Wireless Access Points and China
Dear Group,
Are 802.11 a/b/g/n wireless access points powered by PoE regulated for CCC
in China? They are for SRRC but not so clear on CCC
Peter
Sent from my iPhone
Dear Group,
Are 802.11 a/b/g/n wireless access points powered by PoE regulated for CCC in
China? They are for SRRC but not so clear on CCC
Peter
Sent from my iPhone
-
This message is from the IEEE Product Safety Engineering
To Those Who are Interested In:
http://www.uluniversity.us/catalog/disp
ay.resource.aspx?ResourceID=347118ClassID=261469
http://www.ansi.org/news_publications/news_story.aspx?menuid=7articleid=2984
-
This message is from the
customs. I believe that this has happened
because shipping people mis-categorized the equipment. This type of hardware
is not listed in the Products Catalog for China Compulsory Certification.
I'm being told that the category assigned to the equipment cannot be
changed
once it arrives
of
hardware is not listed in the Products Catalog for China Compulsory
Certification.
I'm being told that the category assigned to the equipment cannot be
changed once it arrives in China. That the equipment must be returned to the
USA, re-categorized, and then returned to China. This is all 2nd
Can you transfer the products to Hongkong, then move to China again?
Regards
Tim
From: Carl Newton [mailto:emcl...@gmail.com]
Sent: Friday, May 06, 2011 9:46 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Industrial product stopped by China Customs
List Members:
I've just
Carl,
Dealing with China Customs can be painful.
I don't have the exactly same experience. I shipped CCC test samples to China
with $2 invoice (test samples no commercial value). The Customs rejected it.
I had my colleague corrrected to our selling price with a letter to describe
the reason
List Members:
I've just been called by a customer with a piece of industrial extrusion
equipment stopped by Chinese customs. I believe that this has happened
because shipping people mis-categorized the equipment. This type of hardware
is not listed in the Products Catalog for China Compulsory
Hi group,
Previous attempt to identify the Chinese requirement for 2.4 GHz wireless
device, identifies GB-15629.1102, which turns out to be for DSSS (Direct
Sequencing Spread Spectrum). Does anyone knows what will be the correct
standard for FHSS?
Thanks,
N. Shani
-
information on the
China
BG15629 for Wi-Fi. See below.
Thank you, Cucy.
Mike Violette
mi...@wll.com
Washington Laboratories
Radio Frequency and Electrical Safety
301 216-1500 tel:301%20216-1500
cell: 240 401 1388 tel
Dear N. Shani,
Our colleague Cucy in Beijing offers the following information on the China
BG15629 for Wi-Fi. See below.
Thank you, Cucy.
Mike Violette
mi...@wll.com
Washington Laboratories
Radio Frequency and Electrical Safety
301 216-1500
cell: 240 401 1388
Query: I'm aware that the PRC has GB15629 as the required standard for Wi-Fi
devices.
Could someone enlighten me if the above is based/similar to any ITU-R, IEEE or
ETSI standards?
If so, are the power limits the same or lower?
And before anyone mentions it: I'm in the process of acquiring
of experts,
We are building a wireless client 802.11 b/g product and are looking at
taking it into China. I have been down the SRRC road once before, however that
was a while ago. Are any of you aware of changes, technical or procedural, that
SRRC has made since July 2010
Panel of experts,
We are building a wireless client 802.11 b/g product and are looking at taking
it into China. I have been down the SRRC road once before, however that was a
while ago. Are any of you aware of changes, technical or procedural, that SRRC
has made since July 2010 for this kind
@listserv.ieee.org
Date: 01/21/2011 09:06 AM
Subject:Cable Locating Equipment and China
Bob Heller
3M EMC Laboratory, 76-1-01
St. Paul, MN 55107-1208
Tel: 651-778-6336
Fax: 651-778-6252
Bob Heller
3M EMC Laboratory, 76-1-01
St. Paul, MN 55107-1208
Tel: 651-778-6336
Fax: 651-778-6252 -
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your
The only mandatory safety requirements for the product to be placed to the
China Market is CCC certification requirement which is currently applicable
for household appliances only. If the product is designed purely for the use
of industrial environment, the CCC requirement will not be applicable
...@cs.com wrote:
A company is planning to expand manufacturing into China and will supply
their own custom designed equipment for their facility.
What safety and regulatory requirements apply to this equipment being
imported into China?
:)br,Pete
Peter E Perkins, PE
A company is planning to expand manufacturing into China and will supply
their own custom designed equipment for their facility.
What safety and regulatory requirements apply to this equipment being
imported into China?
:) br, Pete
Peter E Perkins, PE
Principal
In message z6vlx2gpqm2mf...@jmwa.demon.co.uk, dated Wed, 10 Nov 2010,
John Woodgate j...@jmwa.demon.co.uk writes:
Information from CEN/CENELEC:
The Europe-China Standards Information Platform (CESIP) is a practical
information tool that aims at strengthening mutual trade and investment
flow
Information from CEN/CENELEC:
The Europe-China Standards Information Platform (CESIP) is a practical
information tool that aims at strengthening mutual trade and investment
flow between Europe and China by making standards and related technical
regulations more accessible. The Platform
Hello All,
Juniper is continuing to grow. I believe this is my third job posting in as
many months.
This position is located in Beijing. If you are interested, please send your
resume directly to me.
Thanks,
Marko
mradoji...@juniper.net
Homologation Manager - China
Requirements
From a contact in China...
The immunity part in GB/T9813-2000 refers to GB/T17618 , test method refer to
GB/T 17626.5 which is equals to CISPR 24 and IEC 61000-4.
Criteria for Ethernet (communication port) is,
1.5KVp-p for unprotected port.
4KVp-p for protected port
10/700 Tr/Th uS
We’ve heard a rumor that China is requiring a surge test on Ethernet ports
per GB/T9813-2000. 4 kV line to ground. Sounds like a product killer to me.
Has anyone heard anything about this?
Thanks.
Ghery S. Pettit, NCE
EMC Regulatory Compliance Manager
Corporate Product Regulations
Dear experts,
MIIT has issued proposal for Catalogue of Key Electronic Information
Products Subject to Pollution Control(Catalogue 1) last year.
Does anyone knows when it will take effective?
Thanks.
Regards,
Aboo
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
My company would like to start manufacturing in China so I am looking for a
local Shenzhen company who specializes in quality inspections /audits
Mechanical /electrical sub assemblies e .
Joel Mandel
Manager
Quality Assurance
Environmental Testing
Teledata Networks
Tel: +972.9.9591850
Fax
: 01/25/2010 12:19 PM
Subject:Re: China CNCA 2009 Notice No. 42 - Validation of CCC
Certificates
Bayode
Radio is covered under the China SRRC
Peter
--- On Mon, 1/25/10, bayode.olab...@checkpt.com bayode.olab...@checkpt.com
wrote:
From
Bayode
Radio is covered under the China SRRC
Peter
--- On Mon, 1/25/10, bayode.olab...@checkpt.com bayode.olab...@checkpt.com
wrote:
From: bayode.olab...@checkpt.com bayode.olab...@checkpt.com
Subject: Re: China CNCA 2009 Notice No. 42 - Validation of CCC
Certificates
@listserv.ieee.org
List-Post: emc-pstc@listserv.ieee.org
List-Post: emc-pstc@listserv.ieee.org
Date: 01/25/2010 08:57 AM
Subject:China CNCA 2009 Notice No. 42 - Validation of CCC Certificates
To Those Who are Interested In:
Effective September 1, 2009
To Those Who are Interested In:
Effective September 1, 2009, CCC certificates are valid for five years. The
original notice is available at: http:/
www.cnca.gov.cn/cnca/zwxx/ggxx/205352.shtml.
Best regards,
Grace Lin
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
Thanks Grace!
--- On Tue, 6/16/09, Grace Lin graceli...@gmail.com wrote:
From: Grace Lin graceli...@gmail.com
Subject: Re: New China CCC Document - English Translation
To: Price, Edward ed.pr...@cubic.com
Cc: owner-emc-p...@listserv.ieee.org, EMC-PSTC
-
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf
Of Grace Lin
Sent: Tuesday, June 16, 2009 5:49 AM
To: jeffcollin...@yahoo.com
Cc: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: New China CCC Document - English Translation
Jeff
-Original Message-
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf
Of Grace Lin
Sent: Tuesday, June 16, 2009 5:49 AM
To: jeffcollin...@yahoo.com
Cc: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: New China CCC Document - English Translation
Jeff,
My interpretation
==
An engineer from China Information Security Certification Center gave
me a call. The requirements for the implementation rules of
compulsory certification for the information security products have
been published. Please refer to the following.
No. 33
Group,
The official CNCA document for CCC compliance was just released in May 2009.
Does anyone have an official or unofficial translation in English? I'm
specifically interested in knowing if Network Intrusion and Network Monitoring
equipment now require the CCC mark. These categories of
If anybody's interested, I have a translated copy of
the Feb. 25, 2009 China WEEE regulation. I'd be happy
to email it directly or post to the site of your choosing.
Mike Mertinooke
mertino...@skyskan.com
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion
The regulation takes effect January 1, 2011.
China will establich a WEEE processing fund. Manufacturers, importers, or
agents have obligation to pay into the fund. (Article 7)
On 3/9/09, James, Chris c...@dolby.co.uk wrote:
If anyone is looking at this then here are some possibly
If anyone is looking at this then here are some possibly useful links:
Info
http://www.chinaenvironmentallaw.com/2009/03/06/china-weee-finally-did-
it/
Regulation (Chinese only)
http://www.gov.cn/zwgk/2009-03/04/content_1250419.htm
Google page translation
http://translate.google.com/translate
Go to CNCA website at http://219.238.178.8/20040420/column/227.htm.
Section 6.1 of each implementation rule shows the mark for the products.
On 11/17/08, Gartman, Richard rgart...@ti.com wrote:
Members,
I am looking for what products need the CCC-S mark for China
Members,
I am looking for what products need the CCC-S mark for China?
Any guidance is appreciated.
TI manufactures battery (AAA) powered Calculators.
W. Richard Gartman, MS, CSP
Product Stewardship Manager
Texas Instruments, Education Technology
7800 Banner Drive, Dallas, Tx 75251
/sbc-x.asp. Two of my Chinese colleagues confirms
this is the type they use in China. In addition to this type (two poles with
ground), two poles (two parallel plates, equal length) and two poles dual
use (two round pins, I believe) are the types listed in the GB 1002-1996.
This standard
are not relevant;
I have the following questions:
The RATINGS of that DIRECT PLUG-IN transformer are:
PRIMARY 220-230V ac, SECONDARY 16Vac /20VA
The QUESTIONS are:
1. Which is the MOST COMMON PLUG CONFIGURATION IN CHINA ? (ROUND pins, OR
FLAT, or Aus-asia configuration )?
DETAILS regarding this aspect
The most common grounded plug type in China is the flat plug similar to the
Australian plug. For Class II plugs (non-grounded), there is a plug
configuration very similar to the U.S. and Japanese two bladed plug. The
Chinese standards are GB 1002 and GB 2099.1 and it covers both configurations
Curt,
The main difference is that a major component in your system such as a power
supply or monitor must also be CCC Certified or must have the component
evaluated separately by the China test house. This can be done by by
submitting an IEC CB Test Report with China deviations
In message e2f07269-948f-4a2c-b173-689cbedba...@umn.edu, dated Thu, 20
Mar 2008, Curt McNamara mcnam...@umn.edu writes:
Is there any relation between having met CE standards and getting a CCC
certificate? I am aware many of the CCC tests are based on IEC
standards.
In some cases. But to give
-to-country
MRA is signed. The first country to take this advantage is New Zealand.
WLAN
CCC certification is not mandatory for WLAN except for those products sold to
Chinese government.
China RoHS Catalogue
Fomulation of this catalogue has not been started. The possible items to be
included
1 - 100 of 420 matches
Mail list logo