elocity settings.� Jogging is in the JOINT_x part,
> and CNC moves are in the AXIS_x section.� In general, you
> want the same settings in both JOINT and AXIS sections.
>
> Jon
>
That's interesting. What is then the major difference between Joint and Axis?
Just jogging parameters?
I still think analog inputs/outputs could be a good way to go. I haven't
run any of this, but something like this for the Python HAL component:
https://gist.github.com/jallwine/1a0ad4ffcee00f31e286c485ea38a609
And something like this to hook it up in HAL:
I think if you have a large machine it won't spin fast enough and it will
be to easy to break the tiny drill point. If you have a tiny lathe the
chuck might be too small for large diameter center drill.
John Figie
On Sat, May 11, 2024, 8:19 AM Stuart Stevenson wrote:
> Hi,
> Sounds li
What type of output driver is used on the 7i84?
John
> -Original Message-
> From: Peter Wallace [mailto:p...@mesanet.com]
> Sent: May 10, 2024 1:54 PM
> To: Todd Zuercher
> Cc: Todd Zuercher via Emc-users
> Subject: Re: [Emc-users] Mesa Card Stepgens?
>
> O
into the motion.analog-in-## and motion.analog-out-## HAL pins.
-John
On Thu, May 9, 2024 at 11:50 AM Todd Zuercher via Emc-users <
emc-users@lists.sourceforge.net> wrote:
> I would like to create a few persistent global named parameters. I want
> to be able to set and read the values of thes
.
# 4 = maximum debugging messages (only in transactions).
INIT_DEBUG=3
Maybe set yours to 3 to get more information?
John
> -Original Message-
> From: Todd Zuercher via Emc-users [mailto:emc-
> us...@lists.sourceforge.net]
> Sent: May 7, 2024 1:29 PM
> To: Peter Wallace; To
> From: andy pugh [mailto:bodge...@gmail.com]
> On Tue, 30 Apr 2024 at 17:31, John Dammeyer
> wrote:
>
> Except it would still require an add on card still called a cape perhaps?
>
>
> I think that the attraction of the Beagleboard was that the PRU could be
&g
system for the older MACH or other users.
Or has the market now matured enough with other solutions like the Centroid
ACORN
https://www.centroidcnc.com/centroid_diy/acorn_cnc_controller.html
and it's pointless to even bother with LinuxCNC?
John
tter. An operator then puts in the right size drill bit and the system
continues to then touch off that drill bit but doesn't update the tool table
length; that stays at 0. The holes are drilled and then rinse and repeat for
additional drill bits.
Anywa
G1 Z-3 F100
G1 X18 A-3240 F300
G1 Z5 F100
G0G90 X36
G1 Z-3.1 F100
G1 X18 A-4320 F400
G1 Z15 F100
G0G90 X0
> -Original Message-
> From: John Dammeyer [mailto:jo...@autoartisans.com]
> Sent: April 12, 2024 9:10 PM
> To: 'Enhanced Machine Controller (EMC)'
> Subject: Re: [Emc
Europe somewhere. I think Spain. And
yes. It's a scroll for a chuck. Past that I know nothing.
> >
> > John
> >
> Cheers, Gene Heskett, CET.
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: April 11, 2024 3:16 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Carving a spiral
>
> On Thu, 11 Apr 2024 at 21:32, John Dammeyer
> wrote:
>
> >
t are you going to do with it? I
> cannot visualize the need.
>
> > But I think I agree the best way to do this is probably still by hand or
with a
> support program that generate the G-code based on parameter input like
> min/max SFM.
> >
> > John
Gene,
My Harm
n/max
SFM.
John
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
I'd take a closer look at the power supplies. A system from 1997 could easily
have electrolytic capacitors that have aged enough to no longer be effective.
If you have an ESR meter you could pull caps and check against new ones. Or
just go whole hog and replace them all.
John
Hi Gene,
Just like I can't get my head around Fusion360 or similar CAD.
AlibreCAD has gone downhill since they trashed their relationship with
MecSoft which correspondingly trashed AlibreCAM.
I'll take a closer look at your approach later today.
Thanks
John
> -Original Message-
>
Hi Andy,
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: April 10, 2024 1:54 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Carving a spiral
>
> On Wed, 10 Apr 2024 at 06:59, John Dammeyer
> wrote:
>
> >
Thanks Alan,
I'll take a look at this later today.
John
> -Original Message-
> From: Alan Condit via Emc-users [mailto:emc-users@lists.sourceforge.net]
> Sent: April 10, 2024 9:27 AM
> To: EMC-Users
> Cc: Alan Condit
> Subject: Re: [Emc-users] Carving a spiral
>
capability in order to be able to have
the rotary table turn while the cutter moves in the X direction as the
spiral is created.
So if I wanted to move the rotary table N degrees while moving X a spiral
would also be created. I guess I'm having trouble figuring out the math for
the G-Code.
John
?
Thanks
John
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Thanks for that link.
John
> -Original Message-
> From: Eric Keller [mailto:keller...@gmail.com]
> Sent: April 9, 2024 11:31 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Raspberry Pi5
>
> If I was starting a new project and needed the sp
. In the long run likely a bad purchase.
There are 42 other projects in front of this one at the moment but I thought
I'd ask.
John
> -Original Message-
> From: gene heskett [mailto:ghesk...@shentel.net]
> Sent: April 9, 2024 10:30 AM
> To: emc-users@lists.sourceforge.net
> Su
Hi all,
Will the Pi5 be any better for LinuxCNC than the Pi4 with a MESA Ethernet
Controller or is the Pi4 already more than what LinuxCNC requires?
John
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists
Oh and I made a mistake. The pst file I have is for a Fadal. And a reference
to that systems G-Code is here:
https://www.helmancnc.com/fadal-g-codes-m-codes-fixed-subroutines/
Now I know what an 'E' does and also the 84.1 and 84.2.
> -Original Message-
> From: John Dammeyer [mai
reach out to them.
John
> -Original Message-
> From: Phill Carter via Emc-users [mailto:emc-users@lists.sourceforge.net]
> Sent: March 27, 2024 9:32 PM
> To: linuxcnc-users
> Cc: Phill Carter
> Subject: Re: [Emc-users] GibbsCAM machine .pst file.
>
> If you can
issues too that I haven't found yet.
Thanks
John
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Thanks Dale,
I've reached out to the retired machinist. I'm thinking now it might be
CAD/CAM software with the G-Code embedded inside it.
https://www.gibbscam.com/en
John
> -Original Message-
> From: Dale Ertley via Emc-users [mailto:emc-users@lists.sourceforge.net]
> Sent:
I
can email them if someone knows how to do this.
Thanks
John
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
PC based
LinuxCNC.
John
> -Original Message-
> From: gene heskett [mailto:ghesk...@shentel.net]
> Why do you persist in messing around with samba/cifs? It has not worked
> 2 apt updates in a row since Tridgle took on a partner
Gosh this was almost 2 years ago. Don't even remember why I was asking.
John
> -Original Message-
> From: Chris Albertson [mailto:albertson.ch...@gmail.com]
> Sent: February 23, 2024 10:30 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Accele
Yup. Stretch.
john@LinuxCNC-G3616:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description:Debian GNU/Linux 9.13 (stretch)
Release:9.13
Codename: stretch
However, when I went down to the machine to do this it was locked solid. No
mouse movement
keys (3x).
Next problem though is I want to install samba to link the way I have my
linux based Raspberry Pi, Beagles and even a macbook running linux with a Pi
user interface.
I get this dreadful feeling that I'm going to have to rebuild my Linux
system for a newer version.
john@LinuxCNC-G3616
to cooperate with both the MESA and
the WiFi Dongle?
Thanks
John
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
+ toward has the
electronics (no schematics or support) ripped out and new electronics installed
and to more of a standard.
John
> -Original Message-
> From: Groups [mailto:gro...@homanndesigns.com]
> Sent: February 8, 2024 9:36 PM
> To: Enhanced Machine Controller (EMC)
> Su
(Z) is + and table movement
> (X) to the right is +
>
> So think of standing on the left side of a Bridgeport then tipping it over to
> the
> left.
>
> On Monday, February 5, 2024 at 11:05:50 AM MST, John Dammeyer
> wrote:
>
> There's been an interesting discus
feather core would arrive. I'm sure
the site selling it was not a con job.
John
> -Original Message-
> From: andrew beck [mailto:andrewbeck0...@gmail.com]
> Sent: February 5, 2024 3:05 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Axis direction
>
the
spindle could be positive. But in an G53 machine coordinate space isn't a Z-
direction towards the spinning tool or part?
That's the way I have my LCNC system and MACH system set up. Even my ELS is
negative towards the lathe chuck.
John
___
Emc-users
I'd be more inclined to change over to the MESA 7i92H and get two parallel
port cards with all the high end capabilities of that product for smoother
stepping etc. I did and haven't looked back.
John
> -Original Message-
> From: Tomaz T. [mailto:tomaz_...@hotmail.com]
> Sent:
There is no reason you cannot used a toothed belt and pulley at the other end.
As long as the lead screw backlash is taken out somehow. On my Gingery Lathe
I have two ball thrust bearings on either side of the lead screw bushing
taking out the backlash. At the tail stock end a toothed
Is there going to be a MicroSD image for The Pi4?
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: December 25, 2023 6:15 PM
> To: Enhanced Machine Controller (EMC)
> Subject: [Emc-users] LinuxCNC 2.9.2 is released
>
> LinuxCNC 2.9.2 has been released. This is a
e
either will work. Why one and not the other? What's the difference from a
user perspective?
For the ARM like a Pi then there really is no choice.
Thanks
John
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Gene
Yes I understand the catastrophic failure mode of Buck converters. But what
is BBLB?
John Figie
On Sat, Dec 9, 2023, 7:39 AM gene heskett wrote:
> On 12/9/23 06:13, andy pugh wrote:
> > On Wed, 6 Dec 2023 at 16:08, Leonardo Marsaglia
> wrote:
> >>
> >> Jus
or that, a $500 ir imager would be nice, but a $29 ir thermometer from
> >> the local lumber yard can do as well. Leonardo might even have one of
> >> those in his toolbox, if only to check his food for adequate cooking. I
> >> do. When I'm on the road, living out
to have a spare STMBL they could let go if
indeed it would solve your problem..
John
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: December 5, 2023 7:44 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] OT Fanuc ot-c cpu po
en they arrive. That won't prevent the power supply
from working again and it may well fix the 1 to 2 hour failure period. In
either case $30 or so worth of caps is cheap.
John
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://
been running
perfectly now a year later.
John
> -Original Message-
> From: Leonardo Marsaglia [mailto:ldmarsag...@gmail.com]
> Sent: December 2, 2023 7:58 AM
> To: Enhanced Machine Controller (EMC)
> Subject: [Emc-users] OT Fanuc ot-c cpu power supply A16B-1212-0950
>
&g
> From: Peter Wallace [mailto:p...@mesanet.com]
> On Thu, 23 Nov 2023, John Dammeyer wrote:
>
> > Quick question here. The HAL file has two time intervals I believe in
> nanoseconds?
> > BASE_PERIOD = 24000
> > SERVO_PERIOD = 100
> >
> > So BASE
John
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
I'm having trouble unsubscribing my husband. Please take him off the list.
Thank you,
Mrs. Ackland
On Thu, Nov 23, 2023, 2:43 PM
wrote:
> Send Emc-users mailing list submissions to
> emc-users@lists.sourceforge.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> It looks like it might be possible (but external power supplies need
> to be added)
> https://www.youtube.com/watch?v=G5VOzO_ERTM
And video card?
John
__
> From: Andy Pugh [mailto:bodge...@gmail.com]
>
> > On 5 Nov 2023, at 05:03, John Dammeyer
> wrote:
> >
> > How does one upgrade a Pi4 running LinuxCNC without building the OS
> from scratch?
>
> Have you updated the apt sources to 2.9-uspace ?
>
How doe
and some hours, minutes and seconds.
Therefore doing a sudo apt-get upgrade again upgrades some files but also
reports path not found.
How does one upgrade a Pi4 running LinuxCNC without building the OS from
scratch?
Thanks
John
> -Original Message-
> From: andy pugh [mailto
of path not found or something like that we know we are
in trouble.
So IMHO, the BBB is not a direction to go.
John
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: November 4, 2023 10:57 AM
> To: Enhanced Machine Controller (EMC)
> Subject:
Here's a bit more information.
https://www.megunolink.com/exclusive/powerstep01-10a-stepper-driver/
> -Original Message-
> From: fxkl47BF--- via Emc-users [mailto:emc-users@lists.sourceforge.net]
> Sent: November 1, 2023 4:38 PM
> To: Enhanced Machine Controller \(EMC\)
> Cc:
in the same line as
16 micro-step resolutions.
I'd ignore the 50% duty cycle just like I'd ignore their max step rate. In
fact I'd ignore StepperOnline for closed loop steppers and stay with AC or
DC Servos.
John
> -Original Message-
> From: Todd Zuercher [mailto:to...@pgrahamdu
This might be a silly question but if you only want to move it one step then
does the step line stay high? When does it go low? After all the next step
might be in 30 minutes so should it go low in 15 minutes? That's quite the
lookahead.
Enquiring minds wish to know. ;-)
John
> -Origi
ding
> too much backpressure?
>
> Todd Zuercher
> P. Graham Dunn Inc.
> 630 Henry Street
> Dalton, Ohio 44618
> Phone: (330)828-2105ext. 2031
>
I agree. I can run my fake 4HP Sears Shop Vac without the inlet hose connected
without overheating.
John
te it to 85% and divide by 750. Now you have real
continuous HP.
I'm sure someone will come up with a more detailed explanation but
essentially this back of the envelope in ink calculation.
John
___
Emc-users mailing list
Emc-users@lists.sourcefor
I don’t think the 4hp is going to tell you much besides something to search for
to look up other comparable shop vacs. 1hp is 745.7 watts, so 4hp is 2982.8
watts. 2982.8W/120V = 24.86A which would be crazy. I searched for a 4hp shop
vac and found a porter cable one that advertises 960W.
This is exciting. Can't wait to see LinuxCNC running on this.
https://www.elektormagazine.com/articles/raspberry-pi-5-a-first-look
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
hangeable presentation of the files. Would look better if all
the .ngc files were restricted to two letter file names.
So for me gmoccapy gets tossed into the trash bin. Maybe it should be
called gmocrappy.
Sorry. I get frustrated when I waste this many hours tr
> From: gene heskett [mailto:ghesk...@shentel.net]
>
> On 9/23/23 19:11, andy pugh wrote:
> > On Sat, 23 Sept 2023 at 22:42, John Dammeyer
> wrote:
> >>
> >> Andy,
> >> Just curious since we have the same harmonic drive and STMBL for the
> 4th
gt;
Gene,
What 3 phase stepper/servo are you using?
John
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Thanks Andy,
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: September 23, 2023 4:09 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Q about angular vel in dro
>
> On Sat, 23 Sept 2023 at 22:42, John Dammeyer
.
STEPGEN_MAXVEL = 225.00
STEPGEN_MAXACCEL = 900.00
P = 1000.0
I = 0.0
D = 0.0
FF0 = 0.0
FF1 = 1.0
FF2 = 0.0
BIAS = 0.0
DEADBAND = 0.0
MAX_OUTPUT = 0.0
And if I give it an G0 A1440 it does 4 revolutions at an indicated velocity of
10800.
John
> -Original Message-
> From: John Da
Andy,
Just curious since we have the same harmonic drive and STMBL for the 4th axis
what max velocity and acceleration are you using.
John
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: September 23, 2023 12:26 PM
> To: Enhanced Machine Con
Hi Gene,
I don't know enough about the inner workings of LinuxCNC but when I designed
the Electronic Lead Screw for the lathe I made a decision (good or bad) that
the fundamental units would be imperial simply because at the time I didn't
have a metric lathe to test on. But there was a need for
is how to load
a G-Code program. Guess I have to read the instructions. At least this
will give me an opportunity to become familiar with the gmoccapy interface.
Does appear to be very extensicve.
John
___
Emc-users mailing list
Emc-users
dow which then vanishes and is replaced with the error list.
John
> -Original Message-----
> From: John Dammeyer [mailto:jo...@autoartisans.com]
> Sent: September 20, 2023 5:22 PM
> To: 'Enhanced Machine Controller (EMC)'
> Subject: Re: [Emc-users] Touch screen interface.
>
&
Stated in that report file is 2.8.4.
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: September 20, 2023 5:11 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Touch screen interface.
>
> On Thu, 21 Sept 2023 at 01:07, J
be screwing this up.
Thanks
John
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: September 20, 2023 4:36 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Touch screen interface.
>
> On Wed, 20 Sept 2023 at 23:36, John Dammey
:bodge...@gmail.com]
> Sent: September 20, 2023 1:50 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Touch screen interface.
>
> On Wed, 20 Sept 2023 at 06:47, John Dammeyer
> wrote:
>
> > PYGST libray not installed?
> > is python-gstX
$
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: September 20, 2023 1:50 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Touch screen interface.
>
> On Wed, 20 Sept 2023 at 06:47, John Dammeyer
> wrote:
>
&
nterface.
>
> On Mon, 18 Sept 2023 at 19:05, John Dammeyer
> wrote:
>
> > For the touch screen AXIS isn't really the best UI. I'm looking for
> suggestions for a better one and how to incorporate it.
>
> Try them all? In many cases all you need to change is the D
ators for the draw bar position along with the serial port control of the
CANUSB.
Thanks
John
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
The user interface looks different but historically it does have messages I
posted so must be right. I was forced to upgrade my WIN-7 system to WIN-10
last spring and so many things broke after that. Still living with the after
effects of the Microsoft virus called WIN-10.
Thanks
John
I've misplaced my link to the STMBL forum.
Can someone direct me?
Thanks
John
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
easy to integrate some sort of serial port control into linuxCNC.
John
> -Original Message-
> From: Chris Albertson [mailto:albertson.ch...@gmail.com]
> Sent: August 22, 2023 4:50 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Reverse Pulse Control on
This is one of the things I found searching LinuxCNC and MODBUS.
https://linuxcnc.org/docs/html/drivers/mb2hal.html
It likely should be pretty easy in LinuxCNC. In MACH3 it was almost trivial to
talk to MODBUS devices.
John
> -Original Message-
> From: Earl Weaver [mailto:we
./serial-relays.py
# Pass Operational State to the CAN devices.
net machine-is-enabled => serial-relays.OpState
net coolant-mist <= iocontrol.0.coolant-mist
net coolant-flood <= iocontrol.0.coolant-flood
net coolant-mist => serial-relays.relay1C
net coolant-flood => serial-relay
up in archives.
John Dammeyer
> -Original Message-
> From: Earl Weaver [mailto:weaverst...@frontier.com]
> Sent: August 22, 2023 8:41 AM
> To: emc-users@lists.sourceforge.net
> Subject: [Emc-users] Reverse Pulse Control on Dust Collectors
>
> Hi everyone,
her
encoder edge, then a calculated value based on where the system thinks it is
will be reported as the position.
John
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: August 15, 2023 1:03 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re:
track.
Now seeing the waveforms from the velocity out over the MESA board I can see
why the Z axis would have that start/stop feel.
John
> -Original Message-
> From: Sam Sokolik [mailto:samco...@gmail.com]
> Sent: August 14, 2023 9:09 PM
> To: Enhanced Machine Controller (EM
likely 10x or even 100x that so we get
a way more detailed waveform that then is repeatable 1mS interval in
LinuxCNC.
John
> -Original Message-
> From: Chris Albertson [mailto:albertson.ch...@gmail.com]
> Sent: August 14, 2023 8:47 PM
> To: Enhanced Machine Controller (EMC)
&
gone too
far and now the drive stops because it has overshot.
I'm guessing.
I'll let you know.
John
> -Original Message-
> From: gene heskett [mailto:ghesk...@shentel.net]
> Sent: August 14, 2023 1:31 PM
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users
will provide two different speeds between quadrature
edges.
Must really fix that.
Here's some of the HAL file if that helps.
John
# This machine has a spindle so we need one of those.
loadrt abs names=abs.spindle
# and the encoder can be noisy so filter out high frequency noise.
loadrt lowpass
and I suspect the velocity setting of 0.000208/250mS.
Does that make sense? Is there a way to log each Z axis speed/distance
command so I can see what it's doing?
Or have I misunderstood how the power tapping synchronized motion is done.
Thanks
nicely formed and the dsPIC software reported both position and RPM. I
have a photo of that setup but it's too large for the forum.
Looking at other stepper motors (size 23) I see that many don't even have
the holes this motor has for mounting a plate so Roland's idea might be
better.
John
Here's a link of the process of setting up the BeagleBone from 7 years ago.
And again as usual with a lot of these types of projects. Unfinished. Left
hanging.
https://machinekit.narkive.com/qsd3ZYMP/hal-vcp-controller-with-beaglebone-g
reen-and-lcd-cape
Yeah I caught that after I posted. I think I corrected that in the next
posting.
Thanks for bringing that to everyone's attention though. So easy nowadays to
get snagged. Must be vigilent.
John
> -Original Message-
> From: Groups [mailto:gro...@homanndesigns.com]
> Sent:
old MachineKit but hardware is already here for a small
lathe.
All of this is relative turnkey and doesn't involve writing a brand new CNC
program on an ESP32.
John
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lis
metal.
https://youtu.be/l_GkLj942jw
John
> -Original Message-
> From: Sam Sokolik [mailto:samco...@gmail.com]
> Sent: August 5, 2023 7:06 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Beaglebone black latency
>
> OMG - I keep forgetting you are t
ch easier.
Even just the adaptor board for my ELS and the software was a few months of
hobby time spent. Doing a full trajectory planner is a huge undertaking.
John
> -Original Message-
> From: Sam Sokolik [mailto:samco...@gmail.com]
> Sent: August 5, 2023 5:51 PM
> To: Enhanc
/product/2261 Maybe this one would work.
Anyway, the key word is discontinued...discontinued...discontinued.
Modern electronics has a lifetime now often less than the development time
for a solid product. Not like the milling machine you buy and expect to use
for 20 years.
John
of some of the other also
discontinued touch screens.
John
> -Original Message-
> From: John Dammeyer [mailto:jo...@autoartisans.com]
> Sent: August 5, 2023 3:24 PM
> To: 'Enhanced Machine Controller (EMC)'
> Subject: Re: [Emc-users] Beaglebone black latency
>
> M
do it for less than
https://youtu.be/X-DY6iL6NcI
John
> -Original Message-
> From: Chris Albertson [mailto:albertson.ch...@gmail.com]
> Sent: August 5, 2023 4:02 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Beaglebone black latency
>
> Why
tles. Won't do what the Beagle does but ...
John
> -Original Message-
> From: Martin Dobbins [mailto:tu...@hotmail.com]
> Sent: August 5, 2023 11:44 AM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Beaglebone black latency
>
> It makes me wond
.html
But I'd rather have a Linux based system or my ELS.
John
> -Original Message-
> From: Chris Albertson [mailto:albertson.ch...@gmail.com]
> Sent: August 4, 2023 5:20 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] Beaglebone black latency
>
by the wayside?
So if someone had a BBB and a cape, installs a version of LinuxCNC (MachineKit)
do they run into what appears to happen often now with trying to upgrade and
unknown web links?
John
> -Original Message-
> From: andy pugh [mailto:bodge...@gmail.com]
> Sent: August 3, 202
wrenches.
3. Pick up portable drill and spin draw bar. Now maybe impact drill could
do both.
4. Once 10 turns are complete catch R8 tool.
Twenty five seconds for it to be done automatically is actually not so bad.
John
> -Original Message-
> From: gene heskett [mailto:ghesk...@shent
1 - 100 of 5151 matches
Mail list logo
