On 8/6/2015 11:34 AM, Gene Heskett wrote:
> On Thursday 06 August 2015 11:14:15 Dave Cole wrote:
>
>> On 8/6/2015 10:12 AM, Gene Heskett wrote:
>>> Question, since the motors can get quite warm, how do you fix a
>>> die-cast 1x1x2.5" box to a motor? Most mod
On 8/6/2015 10:12 AM, Gene Heskett wrote:
> Question, since the motors can get quite warm, how do you fix a die-cast
> 1x1x2.5" box to a motor? Most modern glues tend to come apart at higher
> temps.
I've used Epoxy to glue die cast boxes to Stepper motors with great
success. Drill a hole in th
Does Ford buy them via Amazon ?? ;-) The price is right.
http://www.amazon.co.uk/Febi-36070-Crankshaft-Timing-Wheel/dp/B00CD3DHXO
I can't find a source for the sensor in the US.
Dave
On 7/28/2015 6:01 AM, andy pugh wrote:
> Now that many cars have automatic stop/start there is a requirement
Here it is ... you are right he was tethered and had a life jacket on...
but they were in 8 foot waves! I had no idea that the water was that
rough.
That would be a very rough ride at the bow.So he was likely being
pushed into the waves, while hanging from the tether and it would be
eas
On 7/22/2015 12:28 PM, andy pugh wrote:
> On 22 July 2015 at 16:34, Dave Cole wrote:
>> At night it is common practice to tie in via lifelines even if there are
>> other crew on the boat since it is difficult to find someone in the dark
> And other crew are only any help if the
http://journaltimes.com/news/local/lake-michigan-drowning-tragic-accident/article_d2aa217d-cd0e-5e4f-aa7b-18615469fe1e.html
That is sad.
As a fellow sailor on the Great Lakes, it is easy to see how this could
happen at night when he was going to the bow of the boat to tend a sail.
I wonder if h
So you have a few spares on the shelf! ;-)
Dave
On 7/15/2015 11:21 AM, Ken Strauss wrote:
> The site says " Minimum order quantity: 280 ". I don't have that many mills!
>
>> -Original Message-
>> From: andy pugh [mailto:bodge...@gmail.com]
>> Sent: Wednesday, July 15, 2015 10:46 AM
>> To:
On 7/14/2015 9:41 PM, Jon Elson wrote:
> On 07/14/2015 11:59 AM, Dave Cole wrote:
>> I'm not actually answering your question; but have you looked at the
>> shaft encoders on Ebay recently?
>> There were some $15 units the last time I looked. It might make sense
&g
I'm not actually answering your question; but have you looked at the
shaft encoders on Ebay recently?
There were some $15 units the last time I looked. It might make sense
to adapt to some of those?
$43 seems like a lot of money for the modular units considering what is
delivered.
Dave
On 7/
Andy's idea made me think; Take a look at a commercial pipe threading
machine.
They use a variety of a 3 jaw chuck that uses some type of scroll
mechanism which is actuated by an external ring which you hold in place.
The brand most common around here is "Rigid".That setup would not
work
I think that most CNC power 3 jaw chucks are hydraulic.
You might be able to find one used and setup an air over hydraulic
cylinder to control it so you wouldn't need a running hydraulic power
source.
If you started with a CNC lathe that had some bad controls you might be
a lot further along th
On 7/8/2015 6:20 AM, Marcus Bowman wrote:
> On 7 Jul 2015, at 02:30, andy pugh wrote:
>
>> Can anyone suggest a Mini-ITX motherboard with decent latency and a
>> full-size PCI slot?
>>
>> 12V power input would be nice but not essential. Passively cooled too,
>> if possible.
>>
>> Not being a GA-J18
On 7/7/2015 9:48 AM, andy pugh wrote:
> On 7 July 2015 at 14:42, Dave Cole wrote:
>> How about a Gigabyte J1900M-D3V ??
> I have decided to never buy another Gigabyte MB as they can't write BIOSes.
>
I think the F1 version of the J1900 bios was rough, but the boards I
hav
How about a Gigabyte J1900M-D3V ??
Amazon UK has them in stock.
What was the problem with the J1800?
The J1900's had an issue early on with the version 1 bios and Linux.
Dave
On 7/7/2015 8:51 AM, andy pugh wrote:
> On 7 July 2015 at 09:35, Roland Jollivet wrote:
>> How much are they? (no pr
On 7/2/2015 2:04 PM, Gene Heskett wrote:
> What has been others experience in this calibration aspect? Can I
> believe the dial indicator. Being gear driven, over long ranges, since
> a full inch is 10 turns around the dial, my spidey sense says it could
> have a cyclic error, but from needle 0 t
standard connectors
> that were hand soldered. Easily modified.
>
> Steve Stallings
>
>
>> -Original Message-
>> From: Dave Cole [mailto:linuxcncro...@gmail.com]
>> Sent: Tuesday, June 23, 2015 12:00 AM
>> To: emc-users@lists.sourceforge.net
>&g
Steve Stallings wrote:
> Are you aware that the original motors are 6 wire unipolar
> motors with the center taps connected together at the 5 pin
> DIN plug? While these motors can be used with a bipolar
> driver, rewiring will be necessary.
>
> Steve Stallings
>
>
>> -
Is anyone on the list using some of the TB6600 stepper motor drivers
that are listed on Ebay?
There are some 5A, 50 volt units that are selling for less than $15 each
with free shipping from China or Hong Kong.
I need to put together an inexpensive control box for a Sherline. The
original cont
>>I'd be lost without you. :)
I know, but its a burden I must carry. ;-)
Dave
On 6/22/2015 5:54 PM, Peter Homann wrote:
> Hey Dave,
>
> Thanks for looking out for me. I'd be lost without you. :)
>
> Peter
>
> On 23/06/2015 12:07 AM, Dave Cole wrote:
&g
get a little CD that has the
source code on it for the included GPLed software.
Dave
On 6/22/2015 10:19 AM, sam sokolik wrote:
> https://groups.yahoo.com/neo/groups/mach1mach2cnc/conversations/messages/148029
>
> sam
>
> On 6/22/2015 9:07 AM, Dave Cole wrote:
>> I was refer
?
> Peter Blodow
>
> Am 22.06.2015 04:14, schrieb Dave Cole:
>> Peter,
>>
>> You should know what is going on
>>
>> Dave
>>
>> On 6/21/2015 8:46 PM, Peter wrote:
>>>
>>>
>>>
>>>
>>> I
Peter,
You should know what is going on
Dave
On 6/21/2015 8:46 PM, Peter wrote:
>
>
>
>
> It must be a slow day on the emc-users list.
>
> Peter
>
> ---
> Peter Homann
> http://www.homanndesigns.com/store
>
&
Wow!
I guess this may be why they were pushing hardware generated step and
direction creation so hard.
Dave
On 6/21/2015 3:28 PM, sam sokolik wrote:
> https://groups.yahoo.com/neo/groups/mach1mach2cnc/conversations/topics/148006
>
> sam
>
> --
I know this sounds crazy; But I bought a couple of sets of Lovejoy
couplings on Amazon this last winter and while they had an incomplete
selection, I got what I needed
and the prices were very good and with free two day shipping as I am a
Prime member.
Your mileage may vary
Dave
On 6/16
Github was in the news recently regarding their valuation and this:
http://www.bloomberg.com/news/articles/2015-06-15/github-said-to-seek-2-billion-valuation-in-latest-financing
So apparently someone thinks that they have some great value. Not that I
agree..
Dave
On 6/16/2015 3:39 AM, Erik Chr
Squirrel cage motors driven by VFDs slip. The motors have to slip to
magnetize the rotor. If you want tight control of a Squirrel cage
motor (as tight as possible) they put a encoder on the motor then run
the motor in vector control mode, where the slip is compensated for by
the drive. But
n 6/14/2015 12:14 PM, Gene Heskett wrote:
> On Sunday 14 June 2015 10:54:57 Dave Cole wrote:
>> Gene,
>>
>> Try looking for a Nema 48 AC motor. They are almost an inch smaller
>> in diameter.
> That makes perfect sense. But no search hits until I drop it to Nema 42.
Gene,
Try looking for a Nema 48 AC motor. They are almost an inch smaller in
diameter.
Also, there are some metric frame motors that are common in Europe that
are also smaller in diameter than a Nema 56.
http://kurz.com/wp-content/uploads/2014/09/Baldor-NEMA-Frame-Chart.pdf
http://www.engine
On 6/8/2015 12:06 PM, Philipp Burch wrote:
> Hi Dave!
>
> On 08.06.2015 15:43, Dave Cole wrote:
>> ___
>> From the Ethercat Technology Group membership application page:
>>
>> The membership cost is prett
On 6/6/2015 7:06 PM, Gene Heskett wrote:
>
> On Saturday 06 June 2015 16:52:08 Dave Cole wrote:
>> I've been around for a while and worked with current loop serial
>> interfaces, rs232, rs422/485, Ethernet (back when thicknet was
>> standard) etc.
>>
>>
I've been around for a while and worked with current loop serial
interfaces, rs232, rs422/485, Ethernet (back when thicknet was
standard) etc.
Why in world would you not use Ethernet??It leaves you with so many
options that are not available with RS485.
I would join the Ethercat group, pa
I disagree. What could be more worthwhile than discussing the merits
or future possible developments and trends..
Dave
On 6/6/2015 3:32 PM, Rafael wrote:
> Perhaps it's just semantics but we are not making progress here ;-)
>
> On 06/06/2015 05:46 AM, Alexander Rössler wrote:
>> Rafael writes:
On 6/5/2015 11:28 AM, andy pugh wrote:
> On 5 June 2015 at 16:20, Dave Cole wrote:
>> Don't over look the fact that you can attach a regular PLC to LinuxCNC
>> via Modbus TCP or RTU and have the tool changer logic run in the
>> external PLC.
>
> However, for an
On 6/5/2015 7:28 AM, Rick Lair wrote:
> That is pretty sweet, is the ladder very complex?
>
> We are at the point on our Cincinnati Milacron of getting the tool
> changer working, and this a carbon copy of how our machine works. I have
> the changer arm working about 80%, but I am not real sure how
On 6/4/2015 3:34 PM, Viesturs Lācis wrote:
> BTW no need for tethering, it is done over the [wireless] network
Right.. that's what I meant.
Dave
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
On 6/4/2015 12:22 PM, Ron Ginger wrote:
> On 6/4/2015 11:22 AM, emc-users-requ...@lists.sourceforge.net wrote:
>> I have wanted a two computer setup for quite a while. The idea is to
>> have the motion control computer on the back of the machine, so cable
>> runs to motors and sensors can be short.
On 6/4/2015 2:38 PM, Viesturs Lācis wrote:
> 2015-06-04 21:26 GMT+03:00 Mark Wendt :
>> OK, perhaps I should have said another computer, rather than another PC.
>> Androids are computers. Still, you need another machine to run the machine
>> that runs the machine.
> Yeah, I agree, it requires one
On 6/4/2015 12:07 PM, Gene Heskett wrote:
> When he asked my how bad I hurt on a scale of 1-10, I said 22.:) That
> got a chuckle and the mood lightened up.
Or he might have been impressed by your ability to extrapolate! :-)
You probably buy Advil in the mega bottle size now!But that stuff
On 6/4/2015 10:41 AM, Kirk Wallace wrote:
> On 06/04/2015 07:13 AM, Ron Bean wrote:
>>> If you need one computer to see the GUI and one for realtime
>>> effects, why not just start out with a real computer and load Linux and
>>> LinuxCNC on it?
>> The problem I see is that, going forward, "real" co
On 6/4/2015 5:58 AM, andy pugh wrote:
> On 4 June 2015 at 08:22, Peter Blodow wrote:
>> To make sure, if you own a high speed grinder of the longitudinal
>> (Dremel) style, have the jaws open a little less than the size of the
>> bore of the chuck body. Then mount the grinder on the tool post some
On 6/3/2015 10:27 PM, andy pugh wrote:
> On 4 June 2015 at 03:19, andy pugh wrote:
>> Until about 5 years ago I knew of 2 types of chuck. 4-jaw independent
>> and 3-jaw self-centering.
> Supplementary question: How do three-jaw chucks work anyway?
>
> When you thing about it, the scroll has to be
On 6/1/2015 11:28 AM, John Kasunich wrote:
>
> On Mon, Jun 1, 2015, at 11:06 AM, Ralph Stirling wrote:
>> I've been puzzling for a long time how one would create sequential state
>> machines in hal logic, and it finally dawned on me that you guys are doing
>> that in things like pyvcp or axis. It
On 6/1/2015 9:29 AM, andy pugh wrote:
> On 1 June 2015 at 14:12, Gene Heskett wrote:
>
>> how does it stop, by coasting or under vfd control?
> It has a spindle brake.
Andy,
I'd be tempted to lock the variator in place in a low-ish gear for
torque and then hook a VFD up to the motor.
I'd over
On 6/1/2015 6:45 AM, andy pugh wrote:
> On 1 June 2015 at 03:47, rayj wrote:
>> http://www.instructables.com/id/DIY-Lathe-Roasted-Whole-Lamb/?ALLSTEPS
> I have mixed feelings about this, that looked like quite a nice lathe.
Did you notice the rental generator to make the power to power the lathe?
On 5/30/2015 7:47 PM, Gene Heskett wrote:
>
> On Saturday 30 May 2015 11:31:44 Dave Cole wrote:
>> On 5/30/2015 9:28 AM, Gene Heskett wrote:
>>> Greetings everybody;
>>>
>>> I spend an hour last night looking for that list of motherboards and
>>>
On 5/30/2015 9:28 AM, Gene Heskett wrote:
> Greetings everybody;
>
> I spend an hour last night looking for that list of motherboards and
> their latency test results at wiki.linuxcnc.org, without finding it.
>
> The one link to "motherboards" was an empty page ready for data.
>
> Has this spreadsh
Which planner are you using and what are your settings... G64 etc.
G64 will combine segments into larger moves to smooth things out. That
may explain whey you see them combined into one "step".
What happens if you move M5 to it's own line?
Dave
On 5/29/2015 9:05 AM, Len Shelton wrote:
> So a
I disagree.
If I am stepping through a real part program I want to make one move at
a time, not watch each instruction occur.
Dave
On 5/29/2015 8:53 AM, Len Shelton wrote:
> Yes - the on-screen control does the same things. It is multiple lines
> even when those lines all have moves. And someti
A couple of years ago I worked with the local Fanuc service guy on a
couple of machines and he mentioned that he was using Mach3 to make some
small simple routers. I asked him if he
had heard of LinuxCNC and he hadn't. After that, every pause waiting
for software to load was spent talking a
>> The Rasmi input filter
Take it off and see what happens
If that drive is screwing with your keyboard that is on the OUTSIDE of your
control cabinet, imagine what kind of RF exposure is on the inside of your
control cabinet!
Those AD VFDs should also be sold as EMI test generators. ;-)
I forgot to mention. Automation Direct does allow returns up to 30
days after the purchase, so if you try out the filter and it doesn't
work..
Dave
On 5/12/2015 9:20 AM, Tom Easterday wrote:
> Thanks everyone for the great ideas. I have a much fix now. I will let you
> know what I find
One more thing... I'd put the cover on that M350 computer chassis.
That will help keep RF out of the computer.
Dave
On 5/11/2015 9:00 PM, Tom Easterday wrote:
> Early on we made a decision to put our VFD into the same cabinet as the rest
> of the electronics on a lathe retrofit - I originall
I have had very good luck with drive input filters sold by Automation
Direct.On the box it says Delta Electronics Model 20DRT1W3S.
Here it is.
http://www.automationdirect.com/adc/Shopping/Catalog/Drives/AC_Drive_%28VFD%29_Spare_Parts_-a-_Accessories/GS_EMI_-z-_RF_Filters/EMI_-z-_RF_Filters_%
I have had to tweak the deadband value to get rid of loop instability
due to worn ball screws.
Noise and mechanical slop would cause the loop to hunt badly without
some deadband. Sounds like you had a similar problem.
Dave
On 5/11/2015 12:45 PM, Rick Lair wrote:
> I had 0.1 in the entry.
ursday 07 May 2015 08:57:24 Dave Cole wrote:
>> You asked about SSD drives as replacement for rotating disks.
>>
>> I've been using these:
>> http://www.amazon.com/gp/product/B00A35X6GM/ref=oh_aui_detailpage_o04_
>> s00?ie=UTF8&psc=1
> One, with adaptor orde
yet to have a failure.
They are much more reliable than rotating disks which tended to sign off
after about 3 years.
Dave
On 5/7/2015 3:21 AM, Gene Heskett wrote:
> On Wednesday 06 May 2015 18:44:32 Dave Cole wrote:
>> On 5/6/2015 3:57 PM, Gene Heskett wrote:
>>> On Wednesday 06 M
ommunity repositories:
Or here:
http://crunchbang.org/forums/viewtopic.php?id=34207
Grub Customizer is that good!
Once it is installed, it's simple to change Grub.
Dave
On 5/7/2015 3:21 AM, Gene Heskett wrote:
> On Wednesday 06 May 2015 18:44:32 Dave Cole wrote:
>> On 5/6/2015
On 5/6/2015 3:57 PM, Gene Heskett wrote:
> On Wednesday 06 May 2015 14:17:23 Dave Cole wrote:
>> Hand editing grub is supposed to be a no-no. I have no idea why.
>> I used a graphical grub editor the last time I got in trouble with
>> grub and that worked fine - no drama.
&
Hand editing grub is supposed to be a no-no. I have no idea why.
I used a graphical grub editor the last time I got in trouble with grub
and that worked fine - no drama.
Dave
On 5/6/2015 1:21 PM, Erik Christiansen wrote:
> On 06.05.15 12:01, Gene Heskett wrote:
>>> So I have added it manually
A 4 1/2" right angle grinder with a cutoff wheel works well for that
kind of thing.Also easy to control.
A 7 or 9" grinder with a cutoff wheel will be even faster but is a lot
heavier and harder to control.
Just make sure you wear safety glasse. Ear protection is also a very
good idea.
Da
Gene,
Have you looked at this source for belts??I see a 15" belt...
http://www.vbeltsupply.com/k-series-poly?cat=248
I've purchased V belts from this place before for my finish mower that I
pull with a tractor. Locally belts for it were near $80 each.
They sell them for about $25 each.
On 5/1/2015 11:55 AM, andy pugh wrote:
> On 1 May 2015 at 16:37, Dave Cole wrote:
>>> https://www.youtube.com/watch?v=ltmZrDrt6pQ
>> Are you taking orders?
> Send the blanks, I can put teeth on. But only metric T5 at the moment.
> If you can see the belt profile you want h
Yes, HTDs are cogged tooth pulleys. They are similar to timing belt
pulleys except the teeth are rounded.
GT2 belt pulleys are HTD like but they are a newer, improved design.
Dave
On 5/1/2015 11:44 AM, Gene Heskett wrote:
> On Friday 01 May 2015 06:25:03 Les Newell wrote:
>> I just ran the
On 5/1/2015 10:08 AM, andy pugh wrote:
> On 1 May 2015 at 14:34, John Kasunich wrote:
>> Making a poly-V belt pulley is simple lathe work. Making a timing
>> belt pulley means cutting the teeth. Much more complicated.
> You just need to know the right people:
> https://www.youtube.com/watch?v=lt
On 4/30/2015 7:51 PM, Gene Heskett wrote:
> On Thursday 30 April 2015 15:52:44 Dave Cole wrote:
>> Micro V belts are apparently targeted at OEMs like car manufacturers
>> who can make their own pulleys and order thousands of custom spec
>> belts.
>>
>> A friend o
Micro V belts are apparently targeted at OEMs like car manufacturers who
can make their own pulleys and order thousands of custom spec belts.
A friend of mine tried to buy a setup for a custom machine and nothing
was off the shelf and the selection of belt lengths was very limited.
He could ge
Just an alternative idea... run a single thin Cat 5 stranded cable back
to the 7i70 and forget about it.
If you go with pullup resistors, they can be done nicely on a terminal
strip (multilevel is best) but that takes space and I don't know how
much you have.
Dave
On 4/13/2015 11:26 AM, Rick
>Is there a way to set it up so I can home all axes
with one button?
Yes you can, and you can change the order of the homing by axis.
It's in the system integrator manual. Search for homing.
Dave
On 4/12/2015 12:16 AM, Neil wrote:
> Why would I have a "Unhome all axes" option under the machi
On 4/2/2015 6:35 AM, John Thornton wrote:
> I wonder if my posts are getting through, I never see them...
>
> JT
That's Gmail doing that.My Gmail inbox is filtered in the same way
and I am using the Thunderbird email client. I have another folder
called All Mail that was automatically
setu
I prefer gedit.It's easier for noobs to understand and use gedit.
Dave
On 4/1/2015 7:47 AM, John Thornton wrote:
> I thought Nano was the preferred text editor for EMC...
>
> On 4/1/2015 4:30 AM, Belli Button wrote:
>> New Debian install CD does not include Gedit (even though it's the preferr
fic
> than "Re: Contents of Emc-users digest..."
>
>
> Today's Topics:
>
> 1. Re: Possible New Lathe (richsh...@comcast.net)
> 2. ot: voltage and steppers (kqt4a...@gmail.com)
> 3. Re: ot: voltage and steppers (D
Just a WAG..but
There is no heat sinking on that component at all in the picture.
Stepper drivers throw off some heat.. less at lower voltages.
Is the component reducing current to protect itself due to an overtemp
situation?
Dave
On 3/28/2015 2:37 PM, kqt4a...@gmail.com wrote:
> I have a questi
It can actually be a lot more complicated than that now.The newer
PLCs can have multiple outputs in one rung and they don't have to be
driven by
a singular logical result. They can also have embedded numerical
comparisons, one shot / edge instructions, counters and timers.
The logic can
The example is properly described.
The example shows a normally closed contact and then two parallel
contacts next which are normally open. The output coil drives one of
the parallel contacts so the logic line is basically a
start/stop logic rung with a seal in contact.
In the old PLC trainin
On 3/21/2015 7:27 PM, Chris Morley wrote:
>
>> From: viesturs.la...@gmail.com
>> Date: Sat, 21 Mar 2015 21:45:22 +0200
>> To: emc-users@lists.sourceforge.net
>> Subject: Re: [Emc-users] Simple, adjustable timer
>>
>> 2015-03-21 21:11 GMT+02:00 Dave Cole :
&g
n. I know that would work.
http://www.linuxcnc.org/docs/html/ladder/ladder_examples_fr.html
Dave
On 3/21/2015 2:45 PM, Viesturs Lācis wrote:
> 2015-03-21 21:11 GMT+02:00 Dave Cole :
>> I'd run the input to a unused Mesa 24 volt input and put some logic into
>> Classic Ladder
Ultrasonics work ok if the surface is relatively flat you are aiming at
(like liquid level). Otherwise they are iffy.
Another idea; Put a reflector in the grit tank on an angle so the grit
falls off the reflector. Then use a standard light sensor aimed at
the reflector in the tank. When
http://www.denfordata.com/bb/viewtopic.php?f=4&t=755
Where you home is really up to the controls guy (you) but I like it at
positive Z, negative X, Negative Y.
Do the Z first, then X and Y for fewer crashes.
Dave
On 3/20/2015 11:47 AM, Marius Liebenberg wrote:
> A question for the the avid mac
So your existing encoders are differential output but not line driver
compatible?
Perhaps you can hook one leg of your encoder output the the input of a
standard line driver chip?
There is a standard chip that everyone refers to as being equivalent to
for their encoder differential output
I think that Galil uses those for some of their older motion boards also..
So they may sell them. They aren't cheap.
Dave
On 3/19/2015 8:24 AM, Rick wrote:
> That would be it, now I know what to look for, for a cable 20-25' long.
>
> Thanks Guys
>
> On 3/19/2015 9:21 AM, andy pugh wrote:
>> On
I've used that drive before and I am sure it can do 0-10VDC. I'm not
sure about +/- 10VDC with direction reversal.
I think I remember looking at the drive you used before do the
positioning and I believe it was much more capable than the Powerflex 40
drive.
Didn't you use that other drive alo
I re-controlled one of those in the past but we simply rotated the part
around the Z axis as the part moved downward through the coil in the Z
direction.
But then all of our parts were round.
Its a really quick way to heat treat a part!
Dave
On 3/11/2015 8:30 AM, Leonardo Marsaglia wrote:
> 2
/qrx2xpwpn/
>
> http://postimg.org/image/puqnoul7f/
>
> http://postimg.org/image/j0gcz5skb/
>
> http://postimg.org/image/wjx74v6jf/
>
> 2015-03-10 23:55 GMT-03:00 Leonardo Marsaglia > :
>> 2015-03-10 18:38 GMT-03:00 Dave Cole :
>>
>>> I'd like to see it. Pl
I'd like to see it. Please send links when you can.
Dave
On 3/10/2015 2:29 PM, Leonardo Marsaglia wrote:
> 2015-03-10 17:04 GMT-03:00 Dave Cole :
>
>> I've used that drive before and I am sure it can do 0-10VDC. I'm not
>> sure about +/- 10VDC with direction
Andy is right. Bag the 5V power supply and do a port steal from the
USB port for a 5V supply.
You can get nice tight twisted wire pairs from a Cat 5 patch cable.
Dave
On 3/8/2015 6:58 PM, Neil wrote:
> Oops... I should've sent this to the list. Also, I'll add that that
> black ground wire te
The Animatics motors are an all in one Servo motor/drive/interface all
stuffed into a very small package. So there is no separate boards or
amps for these motors.
They are nice, but pricy.
Moog bought out Animatics a while back and Moog is not known for low
priced anything!
Dave
On 3/8/2
I have driven IM483 drives with LinuxCNC using a D525MW board and I
didn't have any issues at all.
I did use a breakout board to do that though.So I suspect that your
breakout board is faulty or you have some other wiring issues.
I've used the previous version of the C10 board and that it wo
On 3/8/2015 6:18 AM, andy pugh wrote:
> On 7 March 2015 at 10:08, Gregg Eshelman wrote:
>> Can LCNC run an Animatics servo controller with RS232 input?
> It can probably be persuaded to.
>
> Do you know anything about the communications protocol used?
They can be controlled in different manners.
VFDs and AC servo drives oftentimes create noise on the incoming AC
power lines to the drives.That noise can cause interference issues
with system electronics.
I recommend you purchase an incoming line filter to keep the noise from
backing up into your AC power line.
This is a filter I use
A Linux system replacing a Windows system yet no swearing and
cussing in those discussions!!! :-)
The "big" problem appears to be that some existing systems cannot read
the DVDs.
A few years ago most people would have claimed that conversion would be
an utter failure as no one but
On 2/23/2015 1:49 PM, dave wrote:
> Weber Systems wrote EZ-Trol
http://www.webersys.com/
Synergy looks a bit like Ez-trol but I don't see any free copies of
Synergy being given away or links to the source code... only a 30 day
free trial.
Perhaps we have a different idea of what is "Public Do
On 2/23/2015 11:12 AM, dave wrote:
> IIRC Weber Systems wrote EZ-Trol for Smithy. A couple of years ago
> it was moved to public domain.
I don't recall that ever being mentioned on the EMC2/LinuxCNC email list?
Where is it at??
Dave
---
This email has been checked for viruses by Avast anti
I think that something like that would be custom made to suit the
application.
A spring steel rod properly tempered, etc.
If you have any heat treatment shops around you they may be able to make
some suggestions. The spring shaft might have to be quite long to get
270 degrees of movement out of
Trademarking doesn't do much other than allowing someone/thing to take
some ownership of a name to make sure that someone else can't openly use
the same "name".
Remember when EMC2 became LinuxCNC? That was due to what EMC saw as a
trademark infringement. (Which I still think was BS.. )
If t
Those connectors are cheap! But I would be hesitant to use them for
stepper connections on a machine that you need to trust. If you get a
bad connection it can take out your stepper driver.
Amphenol and others sells round plastic connectors for not that much.
Check out Digikey, Allied, etc
On 2/17/2015 10:07 PM, Sebastian Kuzminsky wrote:
> On 2/17/15 6:52 PM, Pete Matos wrote:
>> I guess we will have to agree to disagree... I feel like MANY MANY people
>> have given freely of their time to make linuxCNC into what it is today
>> INCLUDING things like User interfaces and many many ot
Sam...
Remember the email list conversations that Rob and you had with the
Mach3 crew a while back?
That now puts those conversations in an entirely different light.
If you want a great discount on a slant back lathe or small mill, now
might be the right time to speak up! :-)
Dave
On 2/18/
On 2/18/2015 6:44 AM, Bruce Layne wrote:
> Does anyone know if they
> created their nice looking graphical front end, or did they subcontract
> that as well? It's fine by me either way, but I am curious.
There really is no difference between the two. I subcontract to other
companies who sell t
I'll say it.
Thank you Tormach !!! I really appreciate it! :-)
Dave
On 2/17/2015 7:38 PM, andy pugh wrote:
> On 18 February 2015 at 00:28, Gene Heskett wrote:
>
>> In any event, an apology from Andreas would not be out of line.
>
> Well, as YouTube comments go it was unusually complimen
I think you can do what you are talking about with LinuxCNC and some HAL
work. But apparently no one on this list has actually done that.
Dave
On 2/11/2015 9:09 AM, kqt4a...@gmail.com wrote:
> On Wed, 11 Feb 2015, Gregg Eshelman wrote:
>
>> On 2/10/2015 3:48 PM, kqt4a...@gmail.com wrote:
>>> H
501 - 600 of 972 matches
Mail list logo