Re: [Emc-users] tripodkins

normally the first trouble is about your geometry and kins there are some different version of kins on web. The kinematic present in linuxcnc serves to simplify your life, but it is not said to be the same as another one you might have taken into consideration. Fortunately, in the world,

Re: [Emc-users] Soft limits with non-cartesian kinematics

Personally, i insert more limitation in my kinematics for generate somethings similar to "soft limit" ... but the only way is possible to do thes is with a if statement ... at every cicle of kinematic save world->z to your var than control if yourvar is equal or not to your limit at these

Re: [Emc-users] Maybe we don't need rtai anymore?

> There are NML communication between the modules. I'm workin on powerLink ie & opensafety bus using NML I'm quite sure that NML is thinking for remote/local interface not for other pourposes any how the new realtime bus (for ex. lasth mounth I ask about CC-Link ie, 1Gb data 1ms

Re: [Emc-users] c++ gui module

Thanks Jeff. so I can modify linuxcnc.nml (37-38-39 row) in these manner: P myUI emcCommand LOCAL localhost W 0 10.00 10 P myUI emcStatus LOCAL localhost R 0 10.00 10 P myUI emcError LOCAL

Re: [Emc-users] c++ gui module

as is it. I think is possible it can do something for the group of machines ... put on each machine a graphical interface is not my purpose. bkt 2017-06-12 11:26 GMT+02:00 andy pugh <bodge...@gmail.com>: > On 11 June 2017 at 22:19, theman whosoldtheworld <bleachk...@gmail.

Re: [Emc-users] EMC traffic

She looks a bit slow ... but she has many other qualities bkt 2017-06-21 14:16 GMT+02:00 andy pugh : > On 20 June 2017 at 08:50, Erik Christiansen > wrote: > > > Incidentally, I've found that the Postscript printer language is sorta > > almost like

Re: [Emc-users] 3 d metal printer

welding 3d printing ...It seems more like a game ... when I was a teenager during the summer job I did the welder ... it was fun to do this kind of game ... obviously we never did a bridge ... otherwise the Boss would find out!! ... I see it hard to do any kind of control that is not damaged by

Re: [Emc-users] CC-Link emc2

So I try to subcribe as CLPA member ok software is open ... private use is ok ... for businnes tecnology use you pay at minimum €1000,0 per year ... SO I think is not so interesting for open sources community. regards bkt 2017-05-26 14:51 GMT+02:00 theman whosoldtheworld <blea

Re: [Emc-users] CC-Link emc2

-Link_Industrial_Networks) Is open ... so I hoped someone had tested it before now. regards bkt 2017-05-26 10:06 GMT+02:00 Gene Heskett <ghesk...@shentel.net>: > On Friday 26 May 2017 03:11:39 theman whosoldtheworld wrote: > > > Sorry maybe second post ... but I've not see

Re: [Emc-users] CC-Link emc2

hoops Gene ... I see now your web page ... very nice ... regards BKT 2017-05-26 10:06 GMT+02:00 Gene Heskett <ghesk...@shentel.net>: > On Friday 26 May 2017 03:11:39 theman whosoldtheworld wrote: > > > Sorry maybe second post ... but I've not see my post on mailing list > &

Re: [Emc-users] CC-Link emc2

Jon Elson <el...@pico-systems.com>: > On 05/26/2017 10:42 AM, Gene Heskett wrote: > >> On Friday 26 May 2017 09:09:12 theman whosoldtheworld wrote: >> >> So I try to subcribe as CLPA member ok software is open ... >>> private use is ok ... for bu

Re: [Emc-users] CC-Link emc2

; On Friday 26 May 2017 09:09:12 theman whosoldtheworld wrote: >> >> So I try to subcribe as CLPA member ok software is open ... >>> private use is ok ... for businnes tecnology use you pay at minimum >>> €1000,0 per year ... SO I think is not so interesting for ope

Re: [Emc-users] CC-Link emc2

On 26 May 2017 at 23:01, theman whosoldtheworld <bleachk...@gmail.com> > wrote: > > > you are right so for emc-user-list protection i find other > > > solution > > > > It's too late, I have been using Gmail exclusively for many years. (I > >

Re: [Emc-users] CC-Link emc2

my apologies to Gene for my decision ... I more simple for me to use Mozzila anti traking and other features that help to nùknow where your kookis are send. bkt 2017-05-27 0:15 GMT+02:00 andy pugh <bodge...@gmail.com>: > On 26 May 2017 at 23:01, theman whosoldtheworld <bleachk.

Re: [Emc-users] CC-Link emc2

ok ... T-bird is fantastic ... I use it on my work place .. more custumisation is possible and good mail code analisys interface ... any how if you would separate in definitive manner work mail and other or install (or create) multiple interfaces or use web mail. bkt 2017-05-27 13:56 GMT+02:00

[Emc-users] CC-Link emc2

Sorry maybe second post ... but I've not see my post on mailing list ... so maybe is lost. My question is: anyone have some experience about CC-Link bus on linux & emc2? regards bkt -- Check out the vibrant tech

Re: [Emc-users] emc2 openProfibus

@ andy ... I'm new to use gmail ... if change subject on post ... the list is breack? bkt 2017-05-31 1:58 GMT+02:00 andy pugh <bodge...@gmail.com>: > On 30 May 2017 at 16:59, theman whosoldtheworld <bleachk...@gmail.com> > wrote: > > I discover that CC-Link

Re: [Emc-users] emc2 openProfibus

:10 GMT+02:00 theman whosoldtheworld <bleachk...@gmail.com>: > @ andy ... I'm new to use gmail ... if change subject on post ... the list > is breack? > > bkt > > 2017-05-31 1:58 GMT+02:00 andy pugh <bodge...@gmail.com>: > >> On 30 May 2017 at 16:59, theman whosoldthewor

Re: [Emc-users] emc2 openPowerlink

SORRY AT ALL FOR MY 1th POST SUBJECT: WAS OPENPOWERLINK not openprofibus.. bkt 2017-05-31 1:58 GMT+02:00 andy pugh <bodge...@gmail.com>: > On 30 May 2017 at 16:59, theman whosoldtheworld <bleachk...@gmail.com> > wrote: > > I discover that CC-Link is tipycal "open pr

Re: [Emc-users] [it was CC-Link emc2] becomes: gmail web Vs. Tbird local

personally I have nothings against both ... But is possible to talk about your experiences on the matter. bkt 2017-05-30 17:10 GMT+02:00 Dave Cole : > On 5/27/2017 7:53 AM, Mark wrote: > >> On 05/26/2017 06:15 PM, andy pugh wrote: >> >>> >>> It's too late, I have been

[Emc-users] emc2 openProfibus

I discover that CC-Link is tipycal "open project" but for people who pay ... so i search for other industrial bus ... open-powerlink .. rt-space works on kernel 4.4 (first step of test) ... now more difficult test ... isol cpu on emc2 and isol cpu on powerlink ... If any one have other experience

[Emc-users] c++ gui module

hi, into /home/linuxcnc-dev/src/emc/usr_intf/axis/extension ... i read these: static int Stat_init(pyStatChannel *self, PyObject *a, PyObject *k) { char *file = get_nmlfile(); if(file == NULL) return -1; RCS_STAT_CHANNEL *c = new RCS_STAT_CHANNEL(emcFormat, "emcStatus",

Re: [Emc-users] emc2 openProfibus

nothing missed ... only not know the STMBL project it seems quite simple obtain a calculated angle of joint for send the data to my program for 18 point delta calibration, so I find these project real interesting. Apart from that, I'm investigating the possibility of having open industrial

Re: [Emc-users] Semi OT: Chinese servo motors Yifeng branded

something i buy servo from china ... there are 3 possibility: 1) the seller send all kit Delta brand (motor+drive+cable) 2) the seller send Delta Drive but china motor 3) the seller may be is a guy that buy by Hong Kong import office, whitout tax, and sell the goods on ebay. In my experience

Re: [Emc-users] c++ gui module

# Use this NML config on the computer running the realtime parts of emc2 # in a networked system. The host address should point to the computer # running the GUI (although this is not critical). # Change the NML_FILE in emc.ini to server.nml. # Start emc2 normally, and then run the GUI client. so

Re: [Emc-users] c++ gui module

gui design, C++11 rt-interface for fielfd bus. So 1 gui interface control & multiple non-screen Lcnc machine. I see QUIC experiments of Sebastian (some youtube video) fantastic ... btk 2017-06-08 23:37 GMT+02:00 theman whosoldtheworld <bleachk...@gmail.com>: > Yes, these

Re: [Emc-users] c++ gui module

Yes, these is a big help ... thanks bkt 2017-06-08 20:08 GMT+02:00 Sebastian Kuzminsky <s...@highlab.com>: > On 06/08/2017 06:44 AM, theman whosoldtheworld wrote: > >> So these is the basic struct for realize a non gui interface ... I think >> the emcmodule.cc file is

[Emc-users] max joint number

there are some possibility that the max joint/axis number become more than 0-8 in future? (0-17 / 0-26 ) Actually if I well undertand is possible use makinekit fork with multiple machinekit instance on same pc ... so same pc more than 0-8 joint ... but I investigate other possbility. bkt

Re: [Emc-users] A phoney from Sourceforge?

not really understand these type of problem ... Now since 2004 we are all labeled with some system soon as we go over the net ... now the thing is much more commercial than then this is true ... but the fact is known so the problem is As we want our things to become public and how much

Re: [Emc-users] c++ gui module

... thanks for your advice ... but there are 3-4 solution for these things But at present I am more concerned with understanding the use of various Lcnc files than any other. For general information, QT5.9 has been released in recent weeks with security rt operations certified to European

Re: [Emc-users] c++ gui module

sorry : certifiable instad certified terms errore. btk 2017-06-10 22:48 GMT+02:00 theman whosoldtheworld <bleachk...@gmail.com>: > ... thanks for your advice ... but there are 3-4 solution for these things > > But at present I am more concerned with understanding the

Re: [Emc-users] c++ gui module

advantages: I want to keep real time > communication local and remove real time demand from ordinary computer. > > > Regards Nicklas Karlsson > > > > On Sun, 11 Jun 2017 23:19:27 +0200 > theman whosoldtheworld <bleachk...@gmail.com> wrote: > > > see these:

Re: [Emc-users] max joint number

theman whosoldtheworld <bleachk...@gmail.com>: > good ... about axis number is for 2 arm robot ... not planning to > partecipate to darpa race (for these year ;)) ... the pose number is more > hight then world axis ... and actual axis number in g code, for 2 arm robot > (18 axis) I t

Re: [Emc-users] max joint number

good ... about axis number is for 2 arm robot ... not planning to partecipate to darpa race (for these year ;)) ... the pose number is more hight then world axis ... and actual axis number in g code, for 2 arm robot (18 axis) I think is quite good, because most part of work is on pose flag not in

Re: [Emc-users] c++ gui module

@Niklas robots is the first candidate in my case Also because with linuxcnc more than 9 axes you can not drive ... @Chris ... real Good Job. bkt 2017-06-12 20:09 GMT+02:00 Nicklas Karlsson <nicklas.karlsso...@gmail.com>: > On Mon, 12 Jun 2017 18:22:07 +0200 > theman who

Re: [Emc-users] c++ gui module

2017-06-13 10:39 GMT+02:00 Nicklas Karlsson <nicklas.karlsso...@gmail.com>: > I also have a few robots, ordinary 6 axes. It must make sense to run the > robots without an ordinary GUI, connect remotely with a GUI then > programming. > > > 2017-06-13 9:09 GMT+02:00 theman

[Emc-users] CC-link IE

Hi at all, anyone has some notice about cc-link bus connected to emc2 or linux machine? There are some guide, someone that test it or similar? regards BKT -- Check out the vibrant tech community on one of the world's

[Emc-users] change servo rigidity dinamically

Any one know how is possible change dinamically the rigidity setting of servos in INI file? The purpose is to take a flying weight with my robot and I would like to dampen the action. Other possibility is to use double encoder on joint and make a sort of differential position control of joint

Re: [Emc-users] change servo rigidity dinamically

I talk about I parameter because I try play with it in my specific app ... any how using m-code script it works? ok. Thanks 2017-10-10 17:08 GMT+02:00 Nicklas Karlsson : > > Any one know how is possible change dinamically the rigidity setting of > > servos in INI

Re: [Emc-users] change servo rigidity dinamically

I think something similar lincurve or lincurve as suggest Andy ans some adjustement like suggest in these post (link on bottom) may help me to solve my problem. https://robotics.stackexchange.com/questions/210/how-can-i-automatically-adjust-pid-parameters-on-the-fly bkt 2017-10-10 20:54

Re: [Emc-users] NML/0MQ run remote last attempt

> and zip. > > On Thu, 24 Aug 2017 12:51:13 +0200 > theman whosoldtheworld <bleachk...@gmail.com> wrote: > > > impossible for me to open these link: > > > > http://nairobi-embedded.org/060_linuxcnc_nml_config.html > > http://nairobi-embedded.org/020_linuxcnc_m

Re: [Emc-users] Serial daisy chain protocol

why not powerlink ie? no need special chip, no need special hardware ... but it run on every device ... so you can must to limit it to a single core realtime working ... so other core is free for Lcnc ... not tested yet with Lcnc istances so I'm not able to report latency performance with Lcnc

Re: [Emc-users] Serial daisy chain protocol

n use wire in place of a clear air path. No need for antennas > > and you can use way ultra-low power. > > > > even for the case of SPI, think in terms is radio transmission lines > > and the job becomes easier. > > > > On Mon, Sep 11, 2017 at 9:54 AM, Nick

Re: [Emc-users] Serial daisy chain protocol --> Powerlink

.@gmail.com>: > On Mon, 11 Sep 2017 13:16:00 +0200 > theman whosoldtheworld <bleachk...@gmail.com> wrote: > > > why not powerlink ie? no need special chip, no need special hardware ... > > but it run on every device ... so you can must to limit it to a single > core &g

Re: [Emc-users] Serial daisy chain protocol --> Powerlink

wikipedia explain better the difference between field bus ethercat is better but need ET110 on slaves nodes + master & master in same deasy chain it is not well digested powerlink not have the same performance because no particular chip is required on master or into slaves most

Re: [Emc-users] Serial daisy chain protocol --> Powerlink

>Chinas is very large and they export a lot of electronic products. It is however a rather new phenomen, Shenzen was the first exprimental economic zone opened in 1980, the area is a little bit larger than the "county" or >similar there I grow up in countryside and in 1980 I think population was

Re: [Emc-users] remote-halui.cc

really not ... i work for make my owns a new way ... actually i make some work with modbus ... very nice result, but using halui as it is made I have no access to all command & status bit/info needed. Using axis remote is a beautiful solution ... for one machine that have a gui. So in my lost

Re: [Emc-users] remote-halui.cc

the previous my mail ... start with "really noti work for make my owns a new way..." is for reply to Nicklas. Thanks to Andy for the right link. 2017-09-28 13:48 GMT+02:00 theman whosoldtheworld <bleachk...@gmail.com>: > really not ... i work for make my owns a new way

Re: [Emc-users] remote-halui.cc

>Seems suitable to run machine from computer program, I guess it could be used to control several machines from a computer. these is the pourpose ... bkt 2017-09-26 6:31 GMT+02:00 Nicklas Karlsson <nicklas.karlsso...@gmail.com>: > > On 25 September 2017 at 00:20, theman

Re: [Emc-users] remote-halui.cc

t war not so nice ... Any how not find linuxcncrsh.cc file in linuxcnc-dev folder maybe reading that code can help me to midufy correctly remote-halui.cc bkt 2017-09-26 9:00 GMT+02:00 theman whosoldtheworld <bleachk...@gmail.com>: > >Seems suitable to run machine from computer p

[Emc-users] remote-halui.cc

hi at all, i try to manage halui.cc to perform a remote-halui.cc using ethernet/ip or powerlink or ethercat. My intent is to create a special ".ini" file for choose comunication type and insert comunication options. After these instead using HALUI = halui, write HALUI = remote-halui and go. I

Re: [Emc-users] NML/0MQ run remote last attempt

ant time for connection finish. bkt 2017-08-23 21:17 GMT+02:00 Nicklas Karlsson <nicklas.karlsso...@gmail.com>: > The link below is split in two rows. > > On Wed, 23 Aug 2017 16:46:52 +0200 > theman whosoldtheworld <bleachk...@gmail.com> wrote: > > >

Re: [Emc-users] Axis -> EMCMOT -> Yaskawa SMC-2000

I think you have come solution: not use yaskawa controller at all ... instead use Lcnc+mesa card and connect it to drive ... or use Lcnc and customize rs422 mesa bord signal for your porpose or add some rs422 to your pc linux and make your own program. But the use is for sheet metal working in

Re: [Emc-users] NML/0MQ run remote last attempt

with ping I have only these reply: e:~$ ping nairobi-embedded.org PING nairobi-embedded.org (198.49.72.146) 56(84) bytes of data. no other... 2017-08-24 18:41 GMT+02:00 theman whosoldtheworld <bleachk...@gmail.com>: > nothing to do on my ubuntu 16.04 firefox 55, chrome xxlastxx ...

Re: [Emc-users] NML/0MQ run remote last attempt

8:22 Mark wrote: > > > On 08/24/2017 06:51 AM, theman whosoldtheworld wrote: > > > impossible for me to open these link: > > > > > > http://nairobi-embedded.org/060_linuxcnc_nml_config.html > > > http://nairobi-embedded.org/020_linuxcnc_mdi_streaming_i

Re: [Emc-users] NML/0MQ run remote last attempt

I control that old link ... now is disappear mystery!! 2017-08-23 16:45 GMT+02:00 theman whosoldtheworld <bleachk...@gmail.com>: > https://forum.linuxcnc.org/32-documents/32860-learning- > linuxcnc-file-structures-and-interaction > > can you help? Kuminzki reply me

Re: [Emc-users] NML/0MQ run remote last attempt

https://forum.linuxcnc.org/32-documents/32860-learning-linuxcnc-file-structures-and-interaction can you help? Kuminzki reply me about on emc-user list in 01-30/06-07/2017 bkt 2017-07-26 18:43 GMT+02:00 Nicklas Karlsson : > I am trying to get NML up and

Re: [Emc-users] Acceleration Confusion

seems really a confusion ... but not from XHC and acceleration, but from velocity and acceleration . In fact, but it may be that I lost something in the meantime, I do not remember it is possible to change axses acceleration on Lcnc, but only speed. I think in the new versions 2.8 there should

Re: [Emc-users] Ethercat master (SOEM,

ility make your > own 4 sided PCBs and re-flow soldering ovens. Basically professional > level electrical engineering skills and equipment > > I looked into using FPGA solutions and found the low-end FPGA > development boards are not nearly fastest enough. > > > > On Sat, Oct 28

Re: [Emc-users] Ethercat master (SOEM,

<nicklas.karlsso...@gmail.com>: > On Thu, 26 Oct 2017 13:36:26 +0200 > theman whosoldtheworld <bleachk...@gmail.com> wrote: > > > I'm working with it now using linuxcnc implementation ... and in past > with > > backoff device. ... > > I just starte

Re: [Emc-users] Ethercat master (SOEM,

I'm working with it now using linuxcnc implementation ... and in past with backoff device. But in addiction .. I know some plc producer work for openplc and similar project linux based ... someone has informed me that in the coming months it will be possible to implement ethernet protocols of

Re: [Emc-users] Ethercat master (linuxcnc tree)

age > of > > it. > > > > Last but no least, there is also the security issue. Here in Europe > > ethernet-ip and secure signals do not agree much for example. In > addition, > > many drive manufacturers do not have safety over ethercat even if they > have

Re: [Emc-users] Ethercat master (SOEM,

com>: > I make my own hardware, it's only for fun and I do not intend to earn money > on it. It's however useful to know how it works during normal working > hours. > > 2017-10-27 11:07 GMT+02:00 theman whosoldtheworld <bleachk...@gmail.com>: > > > I use the sug

Re: [Emc-users] non-contact position sensors, surprisingly good performance.

normally i use omron or panasonic micro photocell ... 0.05mm precision of positioning, hight performances of repetitions, hight vibration resistance, low cos, and possibility of shielded chain type cable, or connectors automotive 4 pin type. Not 2USD, but 19USD for 3meters cable type, or 9USD for

[Emc-users] webrtc as remote control

I not analize timing performances of webrtc app ... but someone think is possible use webrtc tecnology as remote Lcnc control? I think at qt app that send array data over rtc protocol ... not well think about mechanism ... actually I'm only impressionate about video calling latency performances

Re: [Emc-users] non-contact position sensors, surprisingly good performance.

Dammeyer <jo...@autoartisans.com>: > Part numbers? > > > -Original Message- > > From: theman whosoldtheworld [mailto:bleachk...@gmail.com] > > Sent: January-25-18 3:17 PM > > To: Enhanced Machine Controller (EMC) > > Subject: Re: [Emc-users] non-c

Re: [Emc-users] webrtc as remote control

devices have zero perceicable lag. I'd defiantly go with BT over > WiFi for a controller. > > On Thu, Jan 25, 2018 at 3:27 PM, theman whosoldtheworld < > bleachk...@gmail.com> wrote: > > > I not analize timing performances of webrtc app ... but someone think is > >

Re: [Emc-users] non-contact position sensors, surprisingly good performance.

PM series response time: Under light received condition: 20 μs or less (as write on my first reply, first row) . not fast enought?? regards bkt 2018-02-11 23:47 GMT+01:00 jeremy youngs : > How fast are these? Could they be utilized as a spindle encoder? >

Re: [Emc-users] non-contact position sensors, surprisingly good performance.

become a good story. 2018-02-13 15:04 GMT+01:00 Gene Heskett <ghesk...@shentel.net>: > On Tuesday 13 February 2018 08:14:28 theman whosoldtheworld wrote: > > > PM series response time: Under light received condition: 20 μs or less > > (as write on my first reply, f

[Emc-users] Fwd: xemc not supported from 2.7 ... but can run on 2.7/2.8?? why not?

re they still necessary? I see now: emccfg.hh/emcglb.hh is a global library (so can change it to an other if necessary), nml_io.hh define messages structures these file is changed into wath? someone can help me? VERY THANKS AT ALL regards bkt Il giorno sab 8 set 2018 alle ore 10:28 theman wh

[Emc-users] mint 18.1 RTAI 4.1 64bit

I read about an installation of LCNC 64 bit with RTAI I read RTAI4.1 built by Big Sebastian ( will excuse me for the license I got but for me it is a great view all that makes here) I'm Curious ... is based on RTAI 5.x or it is a new version of RTAI? The best linux kernel suggested?

Re: [Emc-users] Large servo selection

In my zone there are a lot of big servo motor manufactorer ( 30-50 hp and more) it work for siemens, snider, and many other big company as I can see that power single phase is for special pourpuse only, and it can be found normally in last page of big general product catalog of big

Re: [Emc-users] controlling a 6 or 7 axis arm?

no ... if use lcnc you have a quite good motion planner, more then one kinematics to load to make your robot arm ... for 7 axis robot you can add 1 axis to pumakins if the axis is calculated for limit acceleration ... there are some realtime component that can help you to make these features

[Emc-users] bash & . ./scripts/rip-environment

I try to run this simple script: #!/bin/sh cd '/home/bmeccoffice/linuxcnc-dev' . ./scripts/rip-environment linuxcnc but in terminal I get an error about . ./ obviusly in a bash script is not accept these command (. space .) there are other way to write it? regards bkt

Re: [Emc-users] QtDro Qt5 c++ upgrade/study need help for two error

-2- EMC_NMLFILE is not declared in this scope ... is not recognized as "EMC_NMLFILE" but as "emc_nmlfile" just see now I search for the reason in Lcnc folder regards bkt Il giorno mer 3 ott 2018 alle ore 11:12 theman whosoldtheworld < bleachk...@gmail.com

[Emc-users] class RCS_CMD_CHANNEL

Where are located definition of class RCS_CMD_CHANNEL ?? I try to use it on my c++ program but everytime compare the warning: warning: ‘emcCommandBuffer’ has incomplete type static RCS_CMD_CHANNEL *emcCommandBuffer = 0; and than some error such as: error: invalid use of incomplete type ‘class

Re: [Emc-users] QtDro Qt5 c++ upgrade/study need help for two error

L::get_address()); }; }; regards bkt Il giorno lun 8 ott 2018 alle ore 12:59 theman whosoldtheworld < bleachk...@gmail.com> ha scritto: > -2- EMC_NMLFILE is not declared in this scope ... is not recognized as > "EMC_NMLFILE" but as "emc_nmlfile" just

[Emc-users] bldc motor drive

somone know a good bldc motor drive connect to a 7i77 like a servo drive AC? regards bkt ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] bldc motor drive

thanks to all ... but I prefer use somethings with CE or at least UL certifications provided by manufactorer and not by me. so > dmm-tech seems a good options for my pourpuse really I need suggest about servo-drive for servo-motors bldc framless like ... normally the motor manufactorer have a

[Emc-users] config ... emcStatus buffer line entry??

In these piece of code I write directly the infile path that I use in these moment, because from qt actually for my is not possible read the name of inifile In these way the compile operation is good the program start, but when launch these void ... these simple piece of code :

Re: [Emc-users] Accuracy of step/servo

seems a backslash mechanical problem or to low power on stepper drive for low motion (if you have these option) or a acc / dec ramp too low... so the stepper stop before to go at real measure. regards bkt Il giorno lun 5 nov 2018 alle ore 00:19 John Dammeyer < jo...@autoartisans.com> ha

[Emc-users] libnml messages on sim axis_mm

He ... today I try again my experiments about QtDro try to print dro in a qwidget inside an QApplication I USE a SIM only installation and i receive these messages (for first start sim/axis/axis_mm.ini aftter my QApplication) ... the error printed on my debugger (the messages become from

Re: [Emc-users] class RCS_CMD_CHANNEL

tran.z )) ; ^ /home/mypc/Qt510/QtDro/qtdro.cpp:31: In file included from qtdro.cpp:31:0: /home/mypc/linuxcnc-dev/include/emc.hh:36: forward declaration of ‘class EMC_STAT’ class EMC_STAT; regards bkt Il giorno mar 9 ott 2018 alle ore 12:56 theman whosoldtheworld < bleachk...@gmail.com>

[Emc-users] QtDro Qt5 c++ upgrade/study need help for two error

I'm trying to study QtDro and upgrade to the new QT5.11 both in the linking library version and in the included library version. Unfortunately I run into two errors that I can not understand: -1- Inifile inifile; -> inifile is not declared in these scope ... why? -2- EMC_NMLFILE is not declared

Re: [Emc-users] bash & . ./scripts/rip-environment, moved directory?

< nicklas.karlsso...@gmail.com> ha scritto: > On Thu, 27 Sep 2018 19:00:00 +0200 > theman whosoldtheworld wrote: > > > I try to run this simple script: > > > > #!/bin/sh > > > > cd '/home/bmeccoffice/linuxcnc-dev' > > > > . ./scripts/rip-enviro

Re: [Emc-users] bash & . ./scripts/rip-environment

Thanks at all .. i solve in these way: #!/bin/sh cd '/home/mypc/linuxcnc-dev' scripts/rip-environment linuxcnc Il giorno ven 28 set 2018 alle ore 05:13 Dewey Garrett ha scritto: > In > theman whosoldtheworld writes: > > >I try to run this simple script: > >

Re: [Emc-users] QtDro Qt5 c++ upgrade/study need help for two error

< przemek.klosow...@gmail.com> ha scritto: > On Tue, Oct 2, 2018 at 12:30 PM theman whosoldtheworld > wrote: > > > > I'm trying to study QtDro and upgrade to the new QT5.11 both in the > > linking library version > > and in the included library version. > &g

Re: [Emc-users] QtDro Qt5 c++ upgrade/study need help for two error

or study pourpouse ... so actually signal and slot is not connected ... https://drive.google.com/open?id=1-GMmWgDZ5iuzg_tPnKhYxVj9XX7kfadS Il giorno lun 8 ott 2018 alle ore 17:54 theman whosoldtheworld < bleachk...@gmail.com> ha scritto: > OK addind this insclude statement I ge

[Emc-users] [EMC] NML_FILE = emc.nml

[EMC] NML_FILE = emc.nml these row in file.ini is still valid? because in html doc there is nothing about, and in my sim config I'm not able to have response from these row emcStatusBuffer = new RCS_STAT_CHANNEL(emcFormat, "emcStatus", "xemc", EMC_NMLFILE); because no EMC_NMLFILE is open

Re: [Emc-users] [Emc-developers] [EMC] NML_FILE = emc.nml

erName = emcStatus * ProcessName = xemc * Config File = /home/mypc/linuxcnc-dev/configs/sim/axis/axis.ini * error_type = 0 (NML_NO_ERROR) libnml/nml/nml.cc 1343: NML::peek: CMS not configured. So my original question (make some

[Emc-users] Fwd: why get these error on sim?

-- Forwarded message - From: theman whosoldtheworld Date: gio 22 nov 2018 alle ore 17:14 Subject: why get these error on sim? To: Good thnksgiving at all ... someone know why in sim I receive these error? (master branch on ubuntu 16.04 userspace) too many nested evaluations

[Emc-users] Pc choice ... help

a salesman insists with to sell me an intel I3 SOC laptop motherboard and claims that since he has no PCH control he will still have excellent performances regarding servo period etc etc ... Since I never understood what actually in modern motherboards worsened the servant period ... now it turns

Re: [Emc-users] Pc choice ... help

Il giorno sab 30 mar 2019 alle ore 04:26 Przemek Klosowski < przemek.klosow...@gmail.com> ha scritto: > On Thu, Mar 28, 2019 at 2:13 PM theman whosoldtheworld < > bleachk...@gmail.com> > wrote: > > > > > PCW in the forum normally suggest desktop motherboard ...

Re: [Emc-users] Pc choice ... help

thanks ... this is the same that i know but my last study about motherboard was wiyh Z80 so my knowelge about is not updated. regards Il giorno dom 31 mar 2019 alle ore 18:43 theman whosoldtheworld < bleachk...@gmail.com> ha scritto: > > > Il giorno sab 30 mar 2019

Re: [Emc-users] 2 installs, one network just works, nothing makes the 2nd work.

sorry, but you try to have 1 Lcnc machine + 2 pc with rtethernet for control Lcnc? It is real necessary? Or you have 2 or more different Lcnc pc tat counicate each other with rtethrnet? Il giorno mer 1 mag 2019 alle ore 20:41 Gene Heskett ha scritto: > Greetings all; > > The one that works is

Re: [Emc-users] 2 installs, one network just works, nothing makes the 2nd work.

@Gene Heskett ... on this side of the ocean when a motorcyclist with a modern motorcycle crosses a motorcyclist with a vintage motorcycle it is customary to make the gesture to touch your hat as a sign of respect ... well, there is a reason there . Now I do it ideally to you and leave the

[Emc-users] (no subject)

About position_logger.cc and my bad memory if I use xemc as nmlfile obtain these error: bkt@bkt:~/linuxcnc-dev$ '/home/bkt/linuxcnc-dev/lib/logger' xemc libnml/cms/cms_cfg.cc 623: cms_config: can't open 'xemc'. Error = 2 -- No such file or directory libnml/nml/nml.cc 370: NML: cms_config

Re: [Emc-users] (no subject)

09:24 theman whosoldtheworld < bleachk...@gmail.com> ha scritto: > About position_logger.cc and my bad memory if I use xemc as nmlfile > obtain these error: > > bkt@bkt:~/linuxcnc-dev$ '/home/bkt/linuxcnc-dev/lib/logger' xemc > libnml/cms/cms_cfg.cc 623: cms_config: can

Re: [Emc-users] (no subject) Position logger, sampler?

position logger is on test folder but the problem was absolute path of linuxcnc.nml file . position_logger.cc when compile and launch need arguments linuxcnc.nml file is the preferred one but absolute path is needed in any case (in my case i work inside linuxcnc-dev folder). regards

Re: [Emc-users] (no subject) Position logger, sampler?

These is the reply done to me by jeff epler 1 year ago more or less Refer to our testsuite for a simple standalone "UI" program which is tested to correctly link in every build of LinuxCNC. https://github.com/LinuxCNC/linuxcnc/blob/master/tests/build/ui/nml-position-logger.cc For my side

  1   2   >