On Sat, Mar 13, 2004 at 04:21:58AM -0800, Sameer wrote:
I'm trying to ssh into my FreeBSD (5.2.1-release sparc version) box from my
desktop, however, it'll take a few seconds for the login as prompt to
appear. I enter my the user name and hit enter. the login attempt then sits
there for
On Sat, 13 Mar 2004, Sameer wrote:
I'm trying to ssh into my FreeBSD (5.2.1-release sparc version) box
from my desktop, however, it'll take a few seconds for the login as
prompt to appear. I enter my the user name and hit enter. the login
attempt then sits there for about 90 seconds
Our local Open Source User Group would like to use the FreeBSD logo on our
website. This will be used in a promotional manner, as we spread the idea
of Open Source software to the technical community of Northern Iowa. This
is a non-profit organization that can be found at
Problem:
I've lost my printer and I can't get it up!
The usb sybsystem have stopped to identify my MFD epson CX5200 usb
printer at all after I upgraded from 5.2-RELEASE (prior to
5.2.1-release) to CVS of 23. March FreeBSD 5.2-RELEASE.
Prior to this CVS upgrade the printer were identified as an
Hello Everyone.
I really some help with my IPFW setup. I'm using FreeBSD 4.9 and IPFW (not
2). The background is I run a residential network for students on campus,
where the FreeBSD box sits between their LAN, and the rest of College (and
therefore the Internet). We are having terrible
Hi Adam,
I am trying to get the gaim port to work. If I build with:
make WITHOUT_NSS=1
everything is fine, but I can't connect to msn. If I don't send any
arguments to make, when I run gaim, I get:
Fatal error 'Spinlock called when not threaded.' at line 83 in file
ZaiD Dashti wrote:
hello
when i install freebsd 5.1 and i configure the x server
every thing works fine, but when iinstall v 5.2.1 and i configure the x
server
my computer hangs !! why ?
anybody has idea !
First - look to log files.
And find info about starting X
Second try reconfigure X
Hi all,
I'm running 5.2.1-RELEASE-p3 on my server, but it reboots under heavy
(disk/cpu) load. The problem can be reproduced.
Running with my kernel or the GENERIC kernel makes no difference.
Unfortunately the crash dumps somehow don't work.
Here is some info about the server (Compaq Proliant
The long and the short of it:
According to stty, ba is 1355.
blah# stty -a -f /dev/ttyd0
speed 1355 baud; 0 rows; 0 columns;
My /boot/loader.rc had
set console=vidconsole
boot -h
What I was trying to do was get the console output to go to
/dev/null or to the (non-existent) video device (see
Hello,
I'm trying to configure my device (pentium based embedded SBC, has
a normal PC bios) to not output the normal boot messages to /dev/ttyd0.
I would be happy to have them go to /dev/ttyd2, however I get a dmesg
message similar to sio2 irq 5 is not in bitmap of probed irqs.
I would prefer
Je tente de configurer ma dev box pour attaquer le repos de FreeBSD
avec P4 (perforce).
Je suis partie de la doc de Peter Wemm (son cookbook) et ai configurer
ma machine à bpriori comme il faut.
Je me connecte au net par une passerelle FBSD qui nat le traffic
interne.
ma commande p4 info sur
i do what you told me
but it is still hangs when i type startx
thanks
From: Arek Czereszewski [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
CC: ZaiD Dashti [EMAIL PROTECTED]
Subject: Re: XFree
Date: Wed, 24 Mar 2004 10:51:11 +0100
MIME-Version: 1.0
Received: from
Sorry it was for FreeBSD-FR ML.
Excuse me.
Le 24 mars 04, à 12:18, Thierry DELHAISE a écrit :
Je tente de configurer ma dev box pour attaquer le repos de FreeBSD
avec P4 (perforce).
Je suis partie de la doc de Peter Wemm (son cookbook) et ai configurer
ma machine à bpriori comme il faut.
Je
I was searching the net for some info on the following:
I had no problems with 3.0.0 the port samba-dev gets a beta from about
July. (not even one of the pre-releases!)
I modified the Makefile in the ports directory and changed the md5 in
distinfo.
I posted my diffs to this list earlier.
Hello all,
Today I have installed on my desktop (with 5.2.1-p3 FreeBSD) postfix (as
replacement for sendmail, rc.conf now has sendmail_enable set to NONE) with
tls,db41,sasl2, and I have configured it as I always do (only difference is
relayhost which is set to another server in my local network
Hi,
I posted this to freebsd-hardware but haven't received a response so thought I'd
try this list. Please excuse the cross-posting.
With the ciss driver on my HP ProLiant ML350 I've noticed the transfer
speed on my RAID controller is only 135.168MB/s.
da0 at ciss0 bus 0 target 0 lun 0
da0:
ZaiD Dashti wrote:
i do what you told me
but it is still hangs when i type startx
What you have in log file when trying start X server??
What version of X you have?
I am sorry about my Enghish is awful.
--
Arek Czereszewski | jid: aro(at)chrome.pl
arek(at)wup-katowice.pl | gg: 1349941
On Wed, 2004-03-24 at 03:41, Chuck Swiger wrote:
Drew Tomlinson wrote:
I'm using 4.9-RELEASE. Is is possible to upgrade Perl from the default
5.005 version to 5.8.2?
Yes.
Are there any steps required beyond installing the port?
Try:
cd /usr/ports/lang/perl5.8
make install
Hi Martin,
Martin Hudec (webmail) wrote:
and /etc/mail/aliases.db has
-rw-r- 1 root wheel 65536 Mar 24 12:25 aliases.db
I think that your problem is with the permissions of that file.
I think that you perhaps should use chmod o+r aliases.db in the
/etc/mail directory, or chgrp postdrop
Hi Remko,
i tried that too.. but no success :(.
-rw-r--r-- 1 root wheel 65536 Mar 24 12:25 aliases.db
anyway thanks :)
Martin
On Wed, 24 Mar 2004 13:12:51 +0100, Remko Lodder wrote
-rw-r- 1 root wheel 65536 Mar 24 12:25 aliases.db
I think that your problem is with the permissions
Hi Martin
Martin Hudec (webmail) wrote:
Hi Remko,
i tried that too.. but no success :(.
-rw-r--r-- 1 root wheel 65536 Mar 24 12:25 aliases.db
anyway thanks :)
Martin
I think i found the issue:
Mar 24 12:25:19 pleiades sendmail[7597]: alias database /etc/mail/aliases
rebuilt by corwin
Mar 24
On Wed, Mar 24, 2004 at 12:15:33AM -0500, Ed Alley wrote:
Andrew Gould wrote;
The description of the DVD burner states DVD+RW. Are you sure it can
burn DVD-R's?
OOPS ;)
Andrew also wrote:
A couple of us have experienced difficulties with Memorex media. Consider
testing
Hi,
thank you :) now it works..
I always used newaliases as:
newaliases_path = /usr/bin/newaliases
to generate aliases.db, as I said on my other FreeBSD 4.x systems I have never
experienced problems so far.
I used postmap hash:aliases, it complained for : signs, so I removed them.
Should also
On Mar 23, 2004, at 8:41 PM, Chuck Swiger wrote:
Drew Tomlinson wrote:
I'm using 4.9-RELEASE. Is is possible to upgrade Perl from the
default 5.005 version to 5.8.2?
Yes.
Are there any steps required beyond installing the port?
Try:
cd /usr/ports/lang/perl5.8
make install
use.perl port
I also
Tadimeti Keshav wrote:
I am trying to install some ports. But I do not know
the various options we can specify during make such as
WITH_GUI=yes
How can I know them for a given port?
As mentioned, one place is the Makefile found in the ports directory.
But there's lots of other more general places
Heya Martin,
Martin Hudec (webmail) wrote:
Hi,
thank you :) now it works..
Good :-)
I always used newaliases as:
newaliases_path = /usr/bin/newaliases
to generate aliases.db, as I said on my other FreeBSD 4.x systems I have never
experienced problems so far.
Do you use postfix there? and use
On Mon, Mar 22, 2004 at 04:43:31PM -0600, Kirk Strauser wrote:
At 2004-03-22T22:29:48Z, Gczi Szabolcs [EMAIL PROTECTED] writes:
freeswan still works for me. and I won't upgrade linux kernel to 2.6
series. so I need solution for freeswan x509 and freebsd ipsec. is there
any?
Well,
The following message was blocked:
Message: BB01857815.0001.mml
From:[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Do you?
This is due to automatic rules that have determined that
certain potentially dangerous filetypes are not allowed.
Rule: Staples - Anti-Virus
Hi community,
I would like to transfer the contents of an hard disk
partition,in which is installed FreeBSD (in another partition
is installed NetBSD and another one is unused),to another hard disk.
The recipient hard disk will have only FreeBSD,and is capable to get
all the data from the
Anyone using gnokii on freebsd with a Data Cable (f-bus and m2bus auto
switch) and a 3510 ?
I've got troubles to connect to /dev/cuaa0
Yoan
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe,
Hi community,
I have my PC with two hard drives.
I'd like to configure my PC this way:the first hard disk with FreeBSD,
the second one with Windows Server 2003.
Is possible to use my PC in this way,booting from FreeBSD ?
I would like to use FreeBSD and,by means of Wine emulator,
being able to use
I have a samba share mounted with mount_smbfs.
Afterwards if I open a file on this share from
another client, I got permission denied on my
own until I close this file on the other client.
I have checked the smbstatus on the server and
got result with deny_none and no oplocks ...
Also meanwhile
Hiho! :-)
I'm getting lots of those, but my system is stable.
ahc0: PCI error Interrupt at seqaddr = 0x
ahc0: Signaled a Target Abort
ahc0: WARNING WARNING WARNING WARNING
ahc0: Too many PCI parity errors observed as a target.
ahc0: Some device on this bus is generating bad parity.
ahc0:
oh one more thing: smbclient works fine
so during the file is open by another
client I got permission denied if I
would like to access the file through
the mounted dir, and from smbclient
I can get the file without errors on
the same machine ...
--
_(_)_
(_. o_)F3CZ0
(_,)
Hi community,
I have my PC with two hard drives.
I'd like to configure my PC this way:the first hard disk with FreeBSD,
the second one with Windows Server 2003.
Is possible to use my PC in this way,booting from FreeBSD ?
I think you can do this OK, but you might want to put the MS stuff
is there a certification program for fbsd? like how you can be redhat certified?
-a
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Wed, Mar 24, 2004 at 12:15:33AM -0500, Ed Alley wrote:
Thanks for the hints. I'm new to DVDs and didn't realize that one DVD
media is not necessarily the same as another; or the fact that the little
- or + on the label means something important. (:-)
Have a look to
On Wed, Mar 24, 2004 at 12:34:36AM -0400, kennon ward wrote:
To All;
I just created the disk for FreeBSD and got my other laptop to boot up
under FreeBSD. I need some help in accessing the hard drive and the
cdrom. I tried to create a directory for the CDROM and the hdd1.
Then tried to
Hello folks
Wayne K9DI Leader Dog Patriot here. I am writing to ask for some help.
I was reading a procmail quickstart guide (by Nancy McGough) and I got to the part
about the .forward file. The guide stated that most modern systems don't use
.forward so my question
Can anybody shed some light on this? Why does portupgrade think that
upgrading from icc-8.0.058 to icc-8.0.061 is downgrading?
# portupgrade icc
** No need to upgrade 'icc-8.0.058' (= icc-8.0.058.p061). \
(specify -f to force)
# portupgrade -f icc
--- Downgrading 'icc-8.0.058' to
On Tue, Mar 23, 2004 at 11:46:10PM -0700, ariel wrote:
is there a certification program for fbsd? like how you can be redhat certified?
Not that I've ever heard of. Generally you need some sort of
reasonably large entity behind such a scheme: for software and system
administration, that
Hi Till
Till Plewe wrote:
Can anybody shed some light on this? Why does portupgrade think that
upgrading from icc-8.0.058 to icc-8.0.061 is downgrading?
Constructive fault, see below
# portupgrade icc
** No need to upgrade 'icc-8.0.058' (= icc-8.0.058.p061). \
(specify -f to force)
-p061 means
Hi community,
I would like to transfer the contents of an hard disk
partition,in which is installed FreeBSD (in another partition
is installed NetBSD and another one is unused),to another hard disk.
The recipient hard disk will have only FreeBSD,and is capable to get
all the data from
On Wed, Mar 24, 2004 at 02:17:21PM +, Wayne K9DI wrote:
Wayne K9DI Leader Dog Patriot here. I am writing to ask for some help.
I was reading a procmail quickstart guide (by Nancy McGough) and I got to the part
about the .forward file. The guide stated that most modern systems
The FreeBSD Project is, as it name implies, an project of volunteers who
dedicate their time to bring us an powerful Unix OS. It is not a company
as Red Hat or Mandrake, therefor there won't be any official
certificates for it. As Matthew said, there can be some universities or
colleges who give
On Wed, Mar 24, 2004 at 03:24:17PM +0100, Remko Lodder wrote:
Hi Till
Till Plewe wrote:
Can anybody shed some light on this? Why does portupgrade think that
upgrading from icc-8.0.058 to icc-8.0.061 is downgrading?
Constructive fault, see below
# portupgrade icc
** No need to
How about using mpd, as your VPN server?
Nice and easy to install and configure. See the mpd port.
Cheers,
Paul
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Martin Tsachev
Sent: Monday, 22 March 2004 6:46 AM
To: [EMAIL PROTECTED]
Subject: PPTP client
On Tue, 23 Mar 2004 17:42:04 -0500 (EST)
Jerry McAllister [EMAIL PROTECTED] wrote:
snip
Actually, I think the intention of the MINI-ISO is to boot and
run the installation with everything loaded from one of the ftp
sites.
I believe you're thinking of the bootonly.iso (21MB)
The FreeBSD Project is, as it name implies, an project of volunteers who
dedicate their time to bring us an powerful Unix OS. It is not a company
as Red Hat or Mandrake, therefor there won't be any official
certificates for it. As Matthew said, there can be some universities or
colleges who
On Mon, 9 Jun 2003, Simon Dick wrote:
Anyone got any idea if the following Mini PCI card will ever be
supported in -current:
[EMAIL PROTECTED]:10:0: class=0x028000 card=0x68041462 chip=0x430114e4
rev=0x02 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM4301 802.11b IEEE 802.11b
On Wed, 2004-03-24 at 15:04, Brian Henning wrote:
On Mon, 9 Jun 2003, Simon Dick wrote:
Anyone got any idea if the following Mini PCI card will ever be
supported in -current:
[EMAIL PROTECTED]:10:0: class=0x028000 card=0x68041462 chip=0x430114e4
rev=0x02 hdr=0x00
vendor =
Marc UBM Bocklet wrote:
[ ... ]
Usually I'm getting one or two errors over a period of two weeks or
longer, but since I'm using my old ISA Creative SB32, I'm getting lots
in a very short period of time.
What could cause that? A broken PCI-card? Motherboard?
Maybe a problem with the ISA-to-PCI
Hello,
I have a server which recently died on me. I believed that the problem
was likely the memory as the machine would reboot of its own accord
initially when accessing via samba or NFS. Then I noticed that it would
reboot when under no load. Given that the motherboard and CPU etc was
pushing
Well, on the good side, Warren, my firewall is now working. Even if
defined open. A step at a time, right?
I checked rc.conf and usb is already enabled. I thought I might have
forgotten that. Checked the bios and usb is supported and engaged.
Dmesg does not say anything about specified ports
Felt a need to clarify this; flame me
where I'm wrong
Jerry McAllister wrote:
Actually, I think the intention of the MINI-ISO is to boot and
run the installation with everything loaded from one of the ftp
sites.
This doesn't sound correct at all. What you've
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wednesday 24 March 2004 16:45, Paul Hamilton wrote:
How about using mpd, as your VPN server?
Sorry Paul, the I cannot control the VPN server. I can only choose the client.
Thanks for the tip, if you've got any more suggestions can you cc me as I
I know that under Linux I can modify how the OS uses IDE drives using
hdparm. Is there an equivilent for FreeBSD? 'man tuning' seems to indicate
that there isn't anything and that I only need to worry about whether I need
to use softupdates. (It also mentions sysctl values such as
Hi All,
I had an old machine with a three button mouse (wheel) running an
ancient FreeBSD - circa 3.4. I could copy/paste with it in
CLI at the console.
Now I have a fast new machine with FreeBSD 4.9, but the mouse
is two button. In X it does the emulate 3 button when both
buttons are
* Bart Silverstrim [EMAIL PROTECTED] [2004-03-24 07:35]:
On Mar 23, 2004, at 8:41 PM, Chuck Swiger wrote:
Drew Tomlinson wrote:
I'm using 4.9-RELEASE. Is is possible to upgrade Perl from the
default 5.005 version to 5.8.2?
Yes.
Are there any steps required beyond installing the
I have set up the ppp server. When somebody calls to me, the connection establishes
and the PPP server gives IPs to my machine and to the remote host.
First the remote host couldn't even ping me. Then i have set up a few filters in the
ppp configuration file, that allow any ICMP, TCP, and UDP
Cheers,
Jorn
On 3/25/2004, ariel [EMAIL PROTECTED] wrote:
is there a certification program for fbsd? like how you can be redhat certified?
-a
http://www.pugetsoundtechnology.com/training/workshops/
sounds like they have the type of thing you're looking for ;)
--
Joshua
Dear list,
I have read somewhere that vinum doesn't harmonize too well with FreeBSD
5.x due to FreeBSD's GEOM.
Is that true? Should I rather use FreeBSD 4.x if I want to use vinum?
TIA
zheyu
___
[EMAIL PROTECTED] mailing list
I'm trying to do a methodical install (for once). 4.9 from a mini CD.
1st thing, when we get to kernel config menu, visual mode,
no network devices show up active. In the inactive drivers section
i see a little list of only six.
question 1: this is hardly a comprehensive list, is it?
there's
In the last episode (Mar 24), adp said:
I know that under Linux I can modify how the OS uses IDE drives using
hdparm. Is there an equivilent for FreeBSD? 'man tuning' seems to
indicate that there isn't anything and that I only need to worry
about whether I need to use softupdates. (It also
Dear list
I have three partition of the same size on different disks (ad0, ad1 and
ad2).
In disklabel they show up as
e: 2097152 7208964.2BSD 2048 1638489 # (Cyl. 715*-
2795*)
(f: ... for ad1 and ad2)
In df they show up as:
Filesystem 1K-blocks Used Avail Capacity
Bob,
Since it is a gateway/proxy/firewall, you will be running some firewall
rules. Use 'netstat -a' command, and check which ports are in Listen
stage. Or use 'lsof | grep Listen' command.
After that you will need to add a firewall rule to _not_ allow incoming
connections to the Squid's
Dear list,
I have read somewhere that vinum doesn't harmonize too well with FreeBSD
5.x due to FreeBSD's GEOM.
Is that true? Should I rather use FreeBSD 4.x if I want to use vinum?
TIA
zheyu
___
[EMAIL PROTECTED] mailing list
adp wrote:
I know that under Linux I can modify how the OS uses IDE drives using
hdparm. Is there an equivilent for FreeBSD?
See man atacontrol...
--
-Chuck
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
What does /etc/hosts show?
/etc/resolv.conf?
/etc/dnscache/env/IP (or whatever directory you're using)
/etc/tinydns/env/IP ( -- -- )
/etc/dnscache/env/ROOT ( -- -- )
/etc/tinydns/env/ROOT ( -- -- )
ls -la /etc/dnscache/root/ip/
and finally:
ifconfig -A
Do you use 2 assigned IP's to one NIC?
On Mon, Mar 22, 2004 at 04:05:01PM -, [EMAIL PROTECTED] wrote:
Have had the same problem. Easiest solution is to cd to
/usr/ports/sysutils/portupgrade and make deinstall clean install
Once that completes all is well again.
Hi Jon,
Thanks much for the hint! It absolutely did the
Dear list
I have three partition of the same size on different disks (ad0, ad1 and
ad2). In disklabel they show up as
e: 2097152 7208964.2BSD 2048 1638489 # (Cyl. 715*- 2795*)
(f: ... for ad1 and ad2)
In df they show up as:
Filesystem 1K-blocks Used Avail Capacity
lee slaughter wrote:
I'm trying to do a methodical install (for once). 4.9 from a mini CD.
1st thing, when we get to kernel config menu, visual mode,
no network devices show up active. In the inactive drivers section
i see a little list of only six.
question 1: this is hardly a comprehensive
* lee slaughter [EMAIL PROTECTED] [2004-03-24 08:50]:
I'm trying to do a methodical install (for once). 4.9 from a mini CD.
1st thing, when we get to kernel config menu, visual mode,
no network devices show up active. In the inactive drivers section
i see a little list of only six.
On Wed, Mar 24, 2004 at 12:34:36AM -0400, kennon ward wrote:
To All;
I just created the disk for FreeBSD and got my other laptop to boot up
under FreeBSD. I need some help in accessing the hard drive and the cdrom. I
tried to create a directory for the CDROM and the hdd1. Then tried to
how can i mount a vcd without getting the wrong blocknumber error
message?
mw
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Wed, 24 Mar 2004 14:21:17 +0100, [EMAIL PROTECTED] [EMAIL PROTECTED]
said:
Hi community,
I would like to transfer the contents of an hard disk
partition,in which is installed FreeBSD (in another partition
is installed NetBSD and another one is unused),to another hard disk.
The recipient
I don't believe you can configure Windows to boot on anything other than
what the BIOS believes is disk 0 (aka Drive C), so set it up such that
Windows is on the first drive and FreeBSD is on the second, and have the
boot manager or Grub or whatever set up to boot from the other drive.
--Chuck
I've got an Omnibook 6100 I'm installing 5.2.1 on, and the ethernet port is
not working correctly (dhclient hangs for ever on it). There is some
chatter on the Linux lists about a fix from Intel for this particular
laptop/chip but I haven't found a FreeBSD equivalent. Anyone know where it
On Wed, 24 Mar 2004 14:30:44 +0100, [EMAIL PROTECTED] said:
Hi community,
I have my PC with two hard drives.
I'd like to configure my PC this way:the first hard disk with FreeBSD,
the second one with Windows Server 2003.
Is possible to use my PC in this way,booting from FreeBSD ?
I would
On 24/03/04 18:31 +0100, Marcus Wellpoth wrote:
how can i mount a vcd without getting the wrong blocknumber error
message?
mw
A vcd is just a standard mode 2 ISO-9660 cd with a certain file/folder
structure I can mount VCDs just fine with my cdrom. Are there
scratches on the disk?
Vasil Dimov [EMAIL PROTECTED] writes:
Oh, yes, ofcourse I love `dd' but Ron was asking about *filesystem*
You didn't read his message as closely as you should have. He said:
I have set up a primary partition with ext2 filesystem to act as a
single data partition accessable from all OSs.
On Wed, Mar 24, 2004 at 10:05:46AM -0500, Jerry McAllister wrote:
By the way, any more FreeBSD-cons coming up, does anyone know?
jerry
Dan Langille's got FreeBSDCan ... I think next month in
Toronto. Check Google
Kevin Kinsey
___
Peter Risdon wrote:
lee slaughter wrote:
I'm trying to do a methodical install (for once). 4.9 from a mini CD.
1st thing, when we get to kernel config menu, visual mode,
no network devices show up active. In the inactive drivers section
i see a little list of only six.
question 1: this is
On Wed, Mar 24, 2004 at 09:09:38AM -0800, Joshua Lokken wrote:
* lee slaughter [EMAIL PROTECTED] [2004-03-24 08:50]:
I'm trying to do a methodical install (for once). 4.9 from a mini CD.
1st thing, when we get to kernel config menu, visual mode,
no network devices show up active. In the
On Wed, Mar 24, 2004 at 10:05:46AM -0500, Jerry McAllister wrote:
By the way, any more FreeBSD-cons coming up, does anyone know?
jerry
Dan Langille's got FreeBSDCan ... I think next month in
Toronto. Check Google
Yes. I saw that one. Unfortunately I have two
On Wed, Mar 24, 2004 at 10:01:11AM -0500, Jerry McAllister wrote:
You burn the CD, boot it, do the preliminary stuff and then when selecting
install media, choose ftp and then pick a site that is convenient from
the list and it handles all the rest. If you have a good high speed
net
On Wed, Mar 24, 2004 at 08:18:55AM -0800, Joshua Lokken wrote:
* Bart Silverstrim [EMAIL PROTECTED] [2004-03-24 07:35]:
On Mar 23, 2004, at 8:41 PM, Chuck Swiger wrote:
Drew Tomlinson wrote:
I'm using 4.9-RELEASE. Is is possible to upgrade Perl from the
default 5.005 version to
On Wed, Mar 24, 2004 at 11:11:39AM -0500, Jerry McAllister wrote:
Now I have a fast new machine with FreeBSD 4.9, but the mouse
is two button. In X it does the emulate 3 button when both
buttons are pressed just fine. But, that doesn't seem to work
on the console. It highlights text just
On Wed, Mar 24, 2004 at 08:33:25AM -0800, lee slaughter wrote:
I'm trying to do a methodical install (for once). 4.9 from a mini CD.
1st thing, when we get to kernel config menu, visual mode,
no network devices show up active. In the inactive drivers section
i see a little list of only six.
On Wed, Mar 24, 2004 at 11:11:39AM -0500, Jerry McAllister wrote:
is two button. In X it does the emulate 3 button when both
buttons are pressed just fine. But, that doesn't seem to work
on the console. It highlights text just fine, but I haven't
discovered a combination that
Luke,
I know that would be coincidental, but you know what your running CPU temp
is (check your BIOS)? OS freeze-ups sometimes occur due to inadequate
cooling of the CPU. Also maybe your computer is close to a heat source?
Are you using the same computer case?
What is your power supply rated at?
On Wed, 24 Mar 2004 10:15:25 -0500
Chuck Swiger [EMAIL PROTECTED] wrote:
Maybe a problem with the ISA-to-PCI bridge on your motherboard, or
else a timing problem. You aren't playing with the bus frequency
multipliers, overclocking, or anything like that, right?
Nope, nothing at all. It's a
Hi Till,
Go to Intel Premier Support ... obtain l_cc_pc_8.0.058.tar.gz
l_cc_pc_8.0.058_pe061.tar.gz ...
Put l_cc_pc_8.0.058.tar.gz l_cc_pc_8.0.058_pe061.tar.gz into
/usr/ports/distfiles and run make again ...
Well actually this could be a name convention error, or something, it
appears that
On 3/24/2004 8:18 AM Joshua Lokken wrote:
* Bart Silverstrim [EMAIL PROTECTED] [2004-03-24 07:35]:
On Mar 23, 2004, at 8:41 PM, Chuck Swiger wrote:
Drew Tomlinson wrote:
I'm using 4.9-RELEASE. Is is possible to upgrade Perl from the
default 5.005 version to 5.8.2?
Yes.
Matthew Seaman wrote:
On Wed, Mar 24, 2004 at 08:33:25AM -0800, lee slaughter wrote:
...kernel config menu, visual mode,
no network devices show up active. In the inactive drivers section
i see a little list of only six.
question 1: this is hardly a comprehensive list, is it?
there's
using dump and restore I ran into an error with restore.
the error message is
tape block size (512) is not a multiple of dump block size (1024)
Can anyone suggest a way to work around this?
--
David Bear
phone: 480-965-8257
fax:480-965-9189
College of Public Programs/ASU
Wilson Hall 232
Hi,
I'm trying to set up some traffic shaping using IPFW2 and DUMMYNET. I
also use natd and I'm a little stumped as to where to put my pipes so
that they will work as I expect.
ipfw add pipe 1 all from 192.168.0.4 to any via xl1
ipfw add divert natd all from any to any via xl1
ipfw add pipe 1
Kevin Kinsey [EMAIL PROTECTED] writes:
If all you've got available
is /, then I feel your pain, for ed(1) and red(1) are somewhat
like kicking dead whales down the beach compared to something
more modern... :-)
You can avoid that pain without making / much bigger by installing the
editors/e3
I have tried for 2 days now and have spent hours waiting for a reply
from classmates.com. I never got connected and the help address just
bring me back into joining which I already have. I'am trying to get my
gold membership so I can use the site.
This is rediculous...I join up but can't
Matthew Seaman wrote:
On Wed, Mar 24, 2004 at 08:33:25AM -0800, lee slaughter wrote:
I'm trying to do a methodical install (for once). 4.9 from a mini CD.
1st thing, when we get to kernel config menu, visual mode,
no network devices show up active. In the inactive drivers section
i see a
1 - 100 of 158 matches
Mail list logo
