Hi!
I have an Intel 82540EM Gigabit Ethernet Controller
working at 100Mb/s on FreeBSD 5-CURRENT and FreeBSD
5-BETA3:
em0:
flags=8843 mtu
1500
options=1b
inet 192.168.1.32 netmask 0xff00 broadcast
192.168.1.255
ether 00:07:e9:09:a7:37
media: Ethernet autoselect
Dear list,
I am wondering why there is never a "d" partition showing up in my
disklabels (e.g. ad0s1d).
Is there something special about it?
TIA
Zheyu
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
T
You need a linux jdk tp build the native one.
* Jorge Mario G. <[EMAIL PROTECTED]> [0937 05:37]:
> Hi there
> I built the native java from ports
> and I see it uses the linux_base which I dont want
> because I'm running out of space
> can I remove it??? completely?? and how by the way
> I mean al
I assume that you are installing *only* FreeBSD on the Pentium and not
multibooting it. Did you select to install the standard MBR or did u
select to leave he MBR untouched? What happens when you try to boot
the system fromthe hadr drive?
Yes, FreeBSD is to be the only system on the machine. I actu
Dear Bob,
sorry, don't forget to backup your file "config".
cp /usr/sbin/config /usr/sbin/config.orig
if you still have problem, send your configuration file
(/sys/i386/config/DUMMYNET ??).
regards,
Abdul Rf
AR> Hello Bob,
AR> Try this one.
AR> cd /usr/src/usr.sbin/config
AR>
hi,
Q1: How to produce a page fault?
Q2: How translate physical memory address into virtual memory address?
Because phys addr is 64 bit and virtual addr is 32 bit.
Q1 description:: I have succeed to add hook in vfs layer to encrypt file
data before write and decrypt file data after read.
Hello Bob,
Try this one.
cd /usr/src/usr.sbin/config
make
make install
and try again to build your kernel.
regards,
abdul rf
Wednesday, September 1, 2004, 11:45:28 AM, you wrote:
BA> Hello all-
BA>I am trying to recompile my kernel to make use of dummynet per the
BA> instructi
Hello all-
I am trying to recompile my kernel to make use of dummynet per the
instruction in the handbook and I am getting this error output and cannot
make use of it. I am calling my edited config file DUMMYNET, fyi.
bash-2.05b# make buildkernel KERNCONF=DUMMYNET
Hi there
I built the native java from ports
and I see it uses the linux_base which I dont want
because I'm running out of space
can I remove it??? completely?? and how by the way
I mean all the linux_base and itss dependencies
Jorge
=
_
it was said:
>I suppose i am feeling lazy to compile gas, binutils, & gcc (which
>would make the 3d instance) from source to be cross-compile-able due
>to lack of a port. Speaking of which ... Nachos has been reported to
>be ported to FreeBSD, btw. (Hint, Hint.)
Hello,
Did you read the entire
Hi Danny,
Thanks again for your reply.
More...
At 21:15 8/31/2004, Danny Mayer, wrote:
>At 06:37 PM 8/31/2004, W. D. wrote:
>>At 17:16 8/31/2004, Harlan Stenn, wrote:
>> >>At 14:57 8/31/2004, W. D., wrote:
>> >>For some reason, I can't get to the UDel.edu FTP site.
>> >>Do you happen to know why
Dear all,
I've trying configure NETGRAPH for PPPoE server on my FreeBSD (I'm
using FreeBSD 4.9R). I've been following this site for my case
(http://www.rensel.com/wireless/pppoe.cfm) and with some configure.
My problem is, if i have connected to my FreeBSD with my Windows
machine (using RASPPPOE)
I assume that you are installing *only* FreeBSD on the Pentium and not
multibooting it. Did you select to install the standard MBR or did u
select to leave he MBR untouched? What happens when you try to boot
the system fromthe hadr drive?
Regard
S.
On Wed, 1 Sep 2004 02:49:51 + (UTC), Phil Th
Hi all,
Just installed FreeBSD on a Pentium 150 I found in the garbage (!), and it
seems the installation went fine, but I cannot boot. I had to use the boot
floppies to start the installation, so I used those to boot from to try
and figure out how to configure the boot options in sysinstall, bu
Greetings!
I've noticed that a group has initiated an IRC support channel on
freenode for FreeBSD. I would like to extend the courtesy of starting
one on irc.esper.net, which is growing on a rather nice incline. I
currently have it registered, but would like to extend the invitation
to expand your
Has anybody successfully compiled & used Nachos on FreeBSD 4.x, a
simulated OS? If so, could you please share the script?
Some information is here...
http://www.cs.washington.edu/homes/tom/nachos/
http://kakugawa.aial.hiroshima-u.ac.jp/lecture/2000/ASE1/Handouts/overview.html
I suppose i am
At 03:57 PM 8/31/2004, W. D. wrote:
>> >>The Windows computer generating the Tardis NTP broadcasts is
>> >>at IP address: 192.168.2.119. Does anyone have any idea
>> >>why it's not picking up these broadcasts?
>> >
>> >Also, that's not a broadcast address as I recall.
>>
>>It's the internal, NAT a
At 06:37 PM 8/31/2004, W. D. wrote:
At 17:16 8/31/2004, Harlan Stenn, wrote:
>>At 14:57 8/31/2004, W. D., wrote:
>>For some reason, I can't get to the UDel.edu FTP site.
>>Do you happen to know why?
>>
>>ftp://ftp.udel.edu/pub/ntp/ntp4/
>If you cannot use FTP, it is because there were Serious Hacki
I'm looking for information on how to properly customize a FreeBSD
distribution when using the "make release" framework. I've made some
attempts to include a custom kernel in my own release, but this kernel
never makes it's way into the staging area (i.e. ftp distribution). The
documentation on th
I'm starting to use PXE to install FreeBSD servers, something I've been
doing with Linux for a while. I've got installs working, but I'm running
into a few flexibility issues I hope have been addressed.
While I use DHCP to install the server, the server should not attempt to
boot DHCP when reboot
I've been trying to configure festival here on tao to be
more familiar with it and be able to use it as a speech
synth'z'r on my laptop. I run into a 'Can't access NAS"
error (ENOENT??) after I try to have the program issue
a test string. A gengtleman at
At 5:59 PM -0500 2004-08-31, W. D. wrote:
Do you have any idea how to get in touch with
whoever is the FreeBSD port maintainer for NTP?
On a FreeBSD machine we use to help support the NTP Project, in
/usr/ports/net/ntp, looking in the Makefile, I see:
MAINTAINER= [EMAIL PRO
Thanks for the info, Brad.
Reply below...
[EMAIL PROTECTED] wrote:
>
> "W. D." <[EMAIL PROTECTED]> wrote:
>
> > FreeBSD appears to expect these NTP programs to be
> > in:
> >
> > /usr/sbin/
> >
> > That is where the 2003 Oct port put them.
>
> That's because the FreeBSD port specification modi
At 17:16 8/31/2004, Harlan Stenn, wrote:
>>At 14:57 8/31/2004, W. D., wrote:
>>For some reason, I can't get to the UDel.edu FTP site.
>>Do you happen to know why?
>>
>>ftp://ftp.udel.edu/pub/ntp/ntp4/
>If you cannot use FTP, it is because there were Serious Hacking attempts
>aimed at UDel from th
On Mon, 30 Aug 2004 19:28:03 -0700 (PDT)
stheg olloydson <[EMAIL PROTECTED]> wrote:
> it was said:
>
> >the version of FreeBsd that i've tried does not support the network
> >card i have on the computer which is a "3Com Etherlink III ISA
> (3C509b->TPO) in PnP mode" i would like to know which vers
If you cannot use FTP it is because there were Serious Hacking attempts
aimed at UDel from that netblock.
You will have to use http instead.
H
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe,
Hi everybody,
I just installed ngircd and it really runs fine. Just as I like it :-)
But I ran into some trouble, when I tried to activate IDENT. My system
is a FreeBSD 4.10. If I try to install from the port or from source,
I get the following error (right now from port):
$ make -DWITH_IDENT ins
On Tue, 31 Aug 2004 08:58:55 -0700, Chris <[EMAIL PROTECTED]> wrote:
> On Wed, 01 Sep 2004 00:44:03 +0900, Luke Kearney <[EMAIL PROTECTED]> >
>
> > > Here are the /etc/opie* Permissions:
> > > -rw--- 1 root wheel 466 Aug 30 16:27 opieaccess
> > > -rw-r--r-- 1 root wheel 200 Aug 30 16:33
Yes, I ran pkgdb -F (I didn't use f, don't know what it's for yet).
I fixed those dependencies.
And yep, I have Qt 3.3.3
I'll have to look at arts...
On Tuesday 31 August 2004 05:12 pm, Donald J. O'Neill wrote:
> I took this from the announcement on the ports list:
> Packages are available for i
What exactly does this make.conf-flag do:
NOPROFILE= true# Avoid compiling profiled libraries
What are "profiled" libraries?
GH
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, se
On Wed, 1 Sep 2004 02:50:36 +0530, Subhro <[EMAIL PROTECTED]> wrote:
> On Tue, 31 Aug 2004 16:05:13 -0500, michael <[EMAIL PROTECTED]> wrote:
> > Im pretty sure Im using a 40 conductor type, as for using the same cable
> > for a Hard drive then cd rom they have there own separate cables,
> > Primar
On Tue, 31 Aug 2004 16:05:13 -0500, michael <[EMAIL PROTECTED]> wrote:
> Im pretty sure Im using a 40 conductor type, as for using the same cable
> for a Hard drive then cd rom they have there own separate cables,
> Primary goes to the hard drive, secondary is to the cd rom and i dont
> use a flopp
On Wed, 1 Sep 2004 02:43:04 +0530, Subhro <[EMAIL PROTECTED]> wrote:
> On Tue, 31 Aug 2004 23:08:24 +0200, Erik Johnsson <[EMAIL PROTECTED]> wrote:
> > On Wed, Sep 01, 2004 at 02:36:52AM +0530, Subhro wrote:
> > > On Tue, 31 Aug 2004 23:04:27 +0200, Erik Johnsson <[EMAIL PROTECTED]> wrote:
> > > >
On Tue, 31 Aug 2004 23:08:24 +0200, Erik Johnsson <[EMAIL PROTECTED]> wrote:
> On Wed, Sep 01, 2004 at 02:36:52AM +0530, Subhro wrote:
> > On Tue, 31 Aug 2004 23:04:27 +0200, Erik Johnsson <[EMAIL PROTECTED]> wrote:
> > > On Wed, Sep 01, 2004 at 02:32:52AM +0530, Subhro wrote:
> > > > Yeh that boar
I took this from the announcement on the ports list:
Packages are available for i386 for 4-STABLE and 5-CURRENT
(5.3-BETA) from
http://rabarber.fruitsalad.org
Did you run pkgdb -fF? As I said before, I had to fix the broken
dependencies on kdelibs and kdepim before "portupgrade -pv kde\*
quant
Miguel Mendez wrote:
On Tue, 31 Aug 2004 17:10:26 -0700
Henrik W Lund <[EMAIL PROTECTED]> wrote:
All modern toolkits allow integration with OpenGL these days, be it SDL
or GTK+/Qt if you need something more feature rich. I see little reason
not to use them.
Just my $0.02
I'll most definitel
On Tue, 31 Aug 2004 23:04:27 +0200, Erik Johnsson <[EMAIL PROTECTED]> wrote:
> On Wed, Sep 01, 2004 at 02:32:52AM +0530, Subhro wrote:
> > Yeh that board works with FreeBSD 5.2.1-R-p9. However you need to
> > reflash the latest BIOS as the ACPI seems to be broken and yes the
> > sound DOES work. Yo
Yeh that board works with FreeBSD 5.2.1-R-p9. However you need to
reflash the latest BIOS as the ACPI seems to be broken and yes the
sound DOES work. You need a rebuild of the kernel though.
Regards
S.
On Tue, 31 Aug 2004 22:57:29 +0200, Erik Johnsson <[EMAIL PROTECTED]> wrote:
> I'm building mys
The installation to external hard disk is exactly the same as if you
had another internal drive. Only the external Hard disk will show up
as da0 and you need to keep an eye on which drive you are
partitioning. Select to install the Boot Manager in the MBR when
sysinstall asks for it. alternative yo
I'm building myself a new desktop, and I'm wondering wether this motherboard will work
with FreeBSD 5.x?
http://www2.abit.com.tw/page/se/motherboard/motherboard_detail.php?pMODEL_NAME=IS7&fMTYPE=Socket%20478&pPRODINFO=Specifications
I'm wondering if the onboard sound will work with FreeBSD. It s
* Steven Friedrich [Di, 31 Aug 2004 at 22:26 GMT]:
> I suspect it's due to the compiler on 4.x. Did the KDE port team build it on
> 4.10-STABLE?
Yes we did.
You can try to install the package from
http://rabarber.fruitsalad.org/index.html#a_4-STABLE
Your compile fails because there is a bogus @
* Chip <[EMAIL PROTECTED]> [0807 14:07]:
> After letting the build of java run all night I got these error 2's
> (here's the end snippet of code) -
have you got a linprocfs mounted?
--
Loud burping while walking around the airport is prohibited in
Halstead, Kansas.
Rasputin :: Jack of All Trad
Thanks for the info.
I added CFLAGS and COPTFLAGS to my make.conf, but it still fails to build
kdelibs on two machines. This looks like a valid build break to me. Did you
build it on 4.x or 5.x?
I suspect it's due to the compiler on 4.x. Did the KDE port team build it on
4.10-STABLE?
On T
If you would like to unsubscribe from this list, please click on the link at the
bottom of the Email...this is the only way to be removed from this list
If you would like to stay subscribed to this list, you do not need to do a thing.
===
Thanks for looking into this, Danny!
Reply below...
At 12:49 8/31/2004, Danny Mayer, wrote:
>At 11:15 PM 8/30/2004, W. D. wrote:
>>Hi Danny,
>>
>>Reply below...
>>
>>At 19:02 8/30/2004, Danny Mayer wrote:
>> >At 07:13 PM 8/30/2004, W. D. wrote:
>> >>30 Aug 21:50:05 ntpd[88]: logging to file /var/
On Tue, Aug 31, 2004 at 09:02:23AM -0400, Moti Levy wrote:
> >It doesn't appear in the list of FreeBSD mailing lists at:
> >
> > http://lists.freebsd.org/mailman/listinfo
> >
> >which suggests that it has gone the way of all flesh.
> >
> >Perhaps [EMAIL PROTECTED] or
> >[EMAIL PROTECTED] would se
On Tuesday 31 August 2004 18:07, Steve Quezadas wrote:
> Hello,
>
> I have tried and tried and tried to get mac filtering to work with
> ipfw2. I have tried the usual sources (Google Groups, google, mailling
> list, man pages, etc). Here it goes:
>
> I basically want to allow traffic to come from o
Hello,
I am new to FreeBSD, hence this question regarding the installation of
FreeBSD 5.2.1 on an
external hard disk. I was considering buying a Maxtor One-Touch (USB and
FireWire, 80GB) to install FreeBSD 5.2.1 on it. I already have Windows XP
Pro and
Fedora Core 2 installed on an Acer TravelMate
On Aug 31, 2004, at 12:07 PM, Steve Quezadas wrote:
I basically want to allow traffic to come from one mac address. I am
trying to get the following rule to work:
ipfw add accept tcp from any to any MAC any 10:20:30:40:50:60
OK, that looks about right.
Yes, ipfw2 is on my freebsd system. This rule
Hi Steven,
It looks to me like you may be missing something in your make.conf
file. I use:
CFLAGS= -O -pipe
COPTFLAGS= -O -pipe
And If you're just upgradeing KDE to 3.3, you can use:
BATCH=yes
Run pkgdb -fF and straighten out any bad dependencies. When I did
the upgrade, after following step
Hello,
I'm having a problem installing 5.3-BETA2 on this box with a Compaq
Integrated SMART Array Controller. The install CD detects the array
and I can partition, label, and install 5.3-BETA2 through the post-
install configuration. However, when I reboot, the OS tells me,
something to the eff
Not to beat a dead horse but here are a couple of extra points to offer.
>From a Base/Minimal install of 5.2.1 I got a current ports tree with
cvsup-without-gui.
Next, I install linux-base:
cd /usr/ports/emulators/linux-base
make install clean
edit /etc/rc.conf to contain
Hello
I am using nppd.so ad aplugin for PDF files in Epiphany.
Plugin installed from ports (pluginwrapper)
Epiphany 1.06
FreeBSD 5.2.1
Flash plugin works great,
Acrobat reader works great by itself.
When I attempt to view a PDF file in epiphany from a URL, nppd.so
attempts to launch acrobat reade
At 11:15 PM 8/30/2004, W. D. wrote:
Hi Danny,
Reply below...
At 19:02 8/30/2004, Danny Mayer wrote:
>At 07:13 PM 8/30/2004, W. D. wrote:
>>30 Aug 21:50:05 ntpd[88]: logging to file /var/log/ntpd.log
>>30 Aug 21:50:05 ntpd[88]: ntpd [EMAIL PROTECTED] Mon Aug 30 14:14:07 GMT
>>2004 (1)
>>30 Aug 21:50
Hi I am trying to install freebsd5.3 beta1 on my Toshiba Dynabook PIII
with 240mb ram and 40 gb hdd but every time the initial boot gets to the
USB driver it stops (freeze) the only thing I can do is hold down the
power button 5 secs. I have tried running with acpi disabled and tried
to disable the
I'm trying to do something very simple, that is, restore just mp3 files
from a set of tapes.
However, none of the expressions I'm using will work..
restore -tvNf /dev/nsa1 expression; where epxressions I have tried are
*mp3
*.mp3
.*mp3
^*.mp3
^*.mp3$
^.*mp3$
It seems any expression consisting of
>>
>> Java HotSpot(TM) Client VM warning: Can't detect initial thread
>> stack location
>> /usr/ports/java/jdk14/work/control/build/bsd-i586/gensrc/java
>> /util/Curr ency Data.java:1: 'class' or 'interface' expected
>> Java HotSpot(TM) Client VM warning: Can't detect initial
Hi folks,
I thought I'd give 5.3-Beta a try on a P4 and Intel board. Installation
(without X) goes smooth until I exit sysinstall for the first boot. The
system stops and prompts with the following output. I tried twice to
install it with different outcome:
1st try:
[thread 13]
Stopped at
Giorgos Keramidas wrote:
On 2004-08-31 11:15, Gerard Samuel <[EMAIL PROTECTED]> wrote:
Im trying to rename a few files with the .dist extension.
Im trying ->
hivemind# find . -name '*.dist' -exec cp {} `basename {} .dist` \;
And Im getting ->
cp: ./html.php.dist and ./html.php.dist are identical (n
I have (had) exactly that same error on an 8-27-2004 clean build of RELENG-5.
I was pressed for time, though, and just went to another similar RELENG-5 box
(that had jdk already installed) and pkg_create -b a jdk package archive. It
installed fine on the machine where the build had failed.
the
On 30 Aug, 2004, at 22:16, Konrad Heuer wrote:
On Mon, 30 Aug 2004, Curtis Vaughan wrote:
In order to get centralized logins to work on my Linux Debian
computers
(authenticating of a RedHat Samba server), I have to:
install libnss-ldap libpam-ldap.
Perform some configuration on the of /etc/libnss
On Tue, Aug 31, 2004 at 06:03:02PM +0200, lycanthrope wrote:
> I'm trying to set up FTP server. I enable the line in inetd, created a user ftp in
> group ftp. now, the ftp user and anonymous can log into FTP, and download. BUT,
> anonymous user can ALSO UPLOAD. how to restrict anonymous account
On Tue, Aug 31, 2004 at 10:02:05AM -0600, Tom Connolly wrote:
> I just installed FreeBSD 5.2.1 and I'm a little confused about the branches.
> >From my research I have deduced that this is a current branch and that there
> is no stable branch. Is this correct? I would like to CVSup the most
> sta
Has anyone used Endance gig-e network cards under 4.9 or 4.10? We've
got a couple, but I wanted to know what type of headaches (if any)
I'll be looking at when swapping our current fiber cards.
Thanks..
- eric
___
[EMAIL PROTECTED] mailing list
http://l
Hello!
I'm trying to set up FTP server. I enable the line in inetd, created a user ftp in
group ftp. now, the ftp user and anonymous can log into FTP, and download. BUT,
anonymous user can ALSO UPLOAD. how to restrict anonymous account to downloading only?
thank you very much!
_
Hello,
I have tried and tried and tried to get mac filtering to work with
ipfw2. I have tried the usual sources (Google Groups, google, mailling
list, man pages, etc). Here it goes:
I basically want to allow traffic to come from one mac address. I am
trying to get the following rule to work:
I just installed FreeBSD 5.2.1 and I'm a little confused about the branches.
>From my research I have deduced that this is a current branch and that there
is no stable branch. Is this correct? I would like to CVSup the most
stable version of 5.2.1 source as well as the ports. Can someone explain
On Wed, 01 Sep 2004 00:44:03 +0900, Luke Kearney <[EMAIL PROTECTED]> >
> > Here are the /etc/opie* Permissions:
> > -rw--- 1 root wheel 466 Aug 30 16:27 opieaccess
> > -rw-r--r-- 1 root wheel 200 Aug 30 16:33 opiekeys
>
> If this is where the information is kept then perhaps you would e
On Tue, 31 Aug 2004 17:10:26 -0700
Henrik W Lund <[EMAIL PROTECTED]> wrote:
Hi,
> Having hacked some OpenGL on FreeBSD myself, I found www.opengl.org to
>
> be helpful (the obvious one, perhaps), as well as NeHe's tutorials
> over on nehe.gamedev.net
Yes, those tutorials are excellent. Kilgard'
On Tue, 31 Aug 2004 08:38:46 -0700
Chris <[EMAIL PROTECTED]> spake thus:
> Hi all,
> Having trouble with security features, I think, that I can't seem to
> resolve. I have a fresh install of 4.10 from FTP and am trying to set
> up Cyrus IMAP with Squirrelmail front end. I was following the guide
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of lycanthrope
Sent: Tuesday, August 31, 2004 8:02 AM
To: [EMAIL PROTECTED]
Subject: VPN poptop
Hello!
I'm using pptpd (PoPToP) on my server to enable clients on LAN to access
internet (DSL connected to ether
Hi all,
Having trouble with security features, I think, that I can't seem to
resolve. I have a fresh install of 4.10 from FTP and am trying to set
up Cyrus IMAP with Squirrelmail front end. I was following the guide
at http://www.cse.ucsc.edu/~venkat/tutorial1.html, more for reference
to FreeBSD as
On 2004-08-31 11:15, Gerard Samuel <[EMAIL PROTECTED]> wrote:
>
> Im trying to rename a few files with the .dist extension.
> Im trying ->
> hivemind# find . -name '*.dist' -exec cp {} `basename {} .dist` \;
>
> And Im getting ->
> cp: ./html.php.dist and ./html.php.dist are identical (not copied).
Hello,
I managed to miss the advice everyone else seems to have had about autotools
cleanup: how do I go about sorting this out? Here's the output of pkgdb -F:
---> Checking the package registry database
Stale origin: 'devel/auto
Ricardo Britto wrote:
Hi,
I'm running FreeBSD 5.2.1-RELEASE-p9 #3 on my machine and I'm having problems
on installing nvidia-driver from ports.
I get the following error: ERROR: Failed to load the NVIDIA module!
KLD nvidia.ko: depends on mem - not available.
That's saying about mem.ko module. Wel
Im trying to rename a few files with the .dist extension.
Im trying ->
hivemind# find . -name '*.dist' -exec cp {} `basename {} .dist` \;
And Im getting ->
cp: ./html.php.dist and ./html.php.dist are identical (not copied).
cp: ./horde.php.dist and ./horde.php.dist are identical (not copied).
cp: .
Doug Poland wrote:
Hello,
I've got a friend that's a C++/OpenGL hacker. He's got a nifty OpenGL
app that he wants to port to FreeBSD. I've no experience with OpenGL
development on FBSD. Are there any OpenGL developers out there that
can point me to FAQs or docs that are necessary to work in this
"oscar wicks" <[EMAIL PROTECTED]> wrote:
>Joseph
>and bsd guys:
>
>hello,i have a very old toshiba t4600c (386, 33Mhz, 200Mb Hd. 8 MbRAM, no
>LAN, just serial port and floppy drive.) i supose that that is enough
>for mini install freebsd 4.10 , but everything goes fine until toshiba
>ask
Hello!
I'm using pptpd (PoPToP) on my server to enable clients on LAN to access internet (DSL
connected to ethernet card on server). That works perfectly. Users dial VPN to the
server,log in and can surf freely.
Now, I would like to enable internet users to access LAN resources. Server has a
re
I failed to mention that I'm running 4.10-STABLE on this box.
Also, I have a second box and I cvsupped it and it fails to build kdelibs too.
Only THIS time, I simply went to the port directory,
i.e., /usr/ports/x11/kdelibs3 and invoked make. On the other system, I
followed the procedures in UP
It seems we have a volunteer. ;-)
Devon forgot to cc the list and has asked me to forward this. I snipped
a bit near the beginning (hope that's OK with you, Devon).
Jud
On Tue, 31 Aug 2004 14:42:03 +0200, "Devon H. O'Dell"
<[EMAIL PROTECTED]> said:
> Jud <[EMAIL PROTECTED]> scribbled:
> > On T
After letting the build of java run all night I got these error 2's
(here's the end snippet of code) -
Java HotSpot(TM) Client VM warning: Can't detect initial thread stack
location
/usr/ports/java/jdk14/work/control/build/bsd-i586/gensrc/java/util/CurrencyData.java:1:
'clas
Matthew Seaman wrote:
On Tue, Aug 31, 2004 at 08:44:43AM -0400, Moti Levy wrote:
is this list active ?
i am subscribed to it but received no emails from it in the past three
months .
anyone knows ?
It doesn't appear in the list of FreeBSD mailing lists at:
http://lists.freebsd.org/mail
On Tue, Aug 31, 2004 at 08:44:43AM -0400, Moti Levy wrote:
> is this list active ?
> i am subscribed to it but received no emails from it in the past three
> months .
>
> anyone knows ?
It doesn't appear in the list of FreeBSD mailing lists at:
http://lists.freebsd.org/mailman/listinfo
whi
On Tue, Aug 31, 2004 at 04:46:22PM +0800, joshua yu wrote:
> i found that there is a FIX-it CD with freebsd. but no documents found about it. is
> there any documents about it and tech me how to use it?
> thanks for your help.
The Fix-it CD (or floppy disk for that matter) is basically a self
c
is this list active ?
i am subscribed to it but received no emails from it in the past three
months .
anyone knows ?
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL
A fixit Cd is a special media which contains a LIVE FreeBSD
filesystem. If your system refuses to boot due to some reason, then
you can use the fixit CD to boot into the system and fix it. For using
the FIXIT CD, boot from the regular CDROM (ie the first cd) and select
to repair the installation. W
Did you select your installation media to be CDROM? If yes then
probably it is a misburnt CD. Try reburning the CD and it will work.
Regards
S.
On Tue, 31 Aug 2004 05:04:28 -0700 (PDT), Roy Joseph
<[EMAIL PROTECTED]> wrote:
>
> Sir,
>
> When I was trying to install Free BSD from CD, I got a mes
hi, all:
i found that there is a FIX-it CD with freebsd. but no documents found about it. is
there any documents about it and tech me how to use it?
thanks for your help.
--
Joshua Yu
MSN: joshuayuAThotmail.com
YAHOO MESSENGER: cigant
-
Do You Yahoo!?
150万曲MP3
On Tue, 31 Aug 2004 05:55:47 +0800, "John"
<[EMAIL PROTECTED]> said:
> Kevin D. Kinsey, DaleCo, S.P. wrote:
> > Hi, John ...
> >
> > As you cc'ed doc@, I'm sending your original mail to them
> > also, so they'll have some background. Comments inline.
> >
> > John Summerfield wrote:
> >
> >> I'v
Sir,
When I was trying to install Free BSD from CD, I got a message as mentioned below.
Unable to get package / INDEX file from selected media
Why this message is displayed. How can we solve this problem?
Please send a reply or documents to solve such problems.
Yours faithfully
ROY
Login as root, /stand/sysinstall. Select configure. After that startup
and make sure that there is check (err cross) mark next to startup
dirs.
Regards
S.
On Tue, 31 Aug 2004 10:09:27 +0200, Jack Raats <[EMAIL PROTECTED]> wrote:
> Sorry that was a typo. The ports and packages install the startup
I'll try using __attribute__ ((packed)) on the declaration of struct
packet_t.
- Original Message -
From: "Dan Nelson" <[EMAIL PROTECTED]>
To: "Lucas (a.k.a T-Bird or bsdfan3)" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Monday, August 30, 2004 9:10 PM
Subject: Re: Variable length p
On Tue, Aug 31, 2004 at 07:45:02AM +0530, Subhro wrote:
> First of all, ports like XFree86 and KDE are really not worth
> maintaining from the ports. Packages do much better for these
Hm, that's a matter of personal preference. I prefer ports, despite
the long compile times and the occasional brea
Thanks Kevin!
One of my problems was the listing for the savage driver and chipset were
not working well together. Using the text version of the configuration
program took the chipset line out when I selected the generic Savage driver.
That fixed it! Thanks so much for your help!
Vaughan
-
Robert,
Thanks so much! You're right, I mixed the numbers up! It's a 4260dvd.
Anyway, I got X up and running. It took a lot of trial and error. The
problem was 2 fold. First, there's a bug in sysinstall. I was getting a
"fail" error message every time because sysinstall was looking for the
Hi All
When I try to create receiver socket in multiple threads and make it
to receive
from multiple clients one thread becomes predominent and the other threads
stops receiving
from the client after that.This problems occurs when i try to send
messages of size 1 m.b for
each receiver thr
I'm working on setting up a mirrored root filesystem as explained in:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/vinum-root.html
I've gotten it to boot then noticed something broken about it on my setup.
More info on my setup is at the bottom of this message.
If it boots to the vinum
On Mon, Aug 30, 2004 at 06:19:48PM -0300, Fernan Aguero wrote:
> Now, in my case I don't need the new and bigger disk to be
> the bootable disk (i.e. I already have two drives that are
> sliced, partitioned and working fine). I just need it to be
> another disk to hold a /home or /scratch partitio
Sorry that was a typo. The ports and packages install the startup scripts in
the right path, but still they are not started at bootup time.
Googling gives a few url's with the same problem but not the solution :(
Jack
- Original Message -
From: "Subhro" <[EMAIL PROTECTED]>
To: "[EMAIL PR
1 - 100 of 101 matches
Mail list logo