Hi!
I'm using such Xircom device without any problems. Now, FreeBSD 6.1, but
before that 6.0, 5.4, .5.2.1 without problems too.
Do you have an appropriate devices included into your kernel?
___
freebsd-questions@freebsd.org mailing list
http://lists.fre
I am running freeBSD 6.1. I just installed an nVidia GeForce FX5200 PCI
card. When I booted , both monitors echoed the boot sequence (Monitor1 a
clone of Monitor0).
I downloaded and installed the current nvidia driver:
NVIDIA-FreeBSD-x86-1.0-8762. Then I installed KDE 3.5.3. I ran
nvidia-conf
On 7/28/06, Chad Leigh -- Shire.Net LLC <[EMAIL PROTECTED]> wrote:
On Jul 27, 2006, at 11:32 PM, Nikolas Britton wrote:
> Floppy and CD-ROM drives, why do I need them? They take up to much
> chassis real estate and I never use them after the server is in
> production. Why can't I do all this st
On Jul 27, 2006, at 11:32 PM, Nikolas Britton wrote:
Floppy and CD-ROM drives, why do I need them? They take up to much
chassis real estate and I never use them after the server is in
production. Why can't I do all this stuff with USB?
If I got a USB flash, USB CD-ROM, and/or a USB floppy driv
Hi !
I'm new in FreeBSD and I made a mistake.
In the file ttys I changed to insecure all the lines and now I cannot log on
even as root.
Only in single user I can log on but I cannot modify the file ttys is said
something this is a read only file system.
Please tell me how I can remediate my
Floppy and CD-ROM drives, why do I need them? They take up to much
chassis real estate and I never use them after the server is in
production. Why can't I do all this stuff with USB?
If I got a USB flash, USB CD-ROM, and/or a USB floppy drive what could
I do with it?
* Boot into DOS to run BIOS
On Jul 27, 2006, at 11:11 PM, Telting wrote:
I just wanted to get it straight. I think I read some post that
said that 3ware actually has and uses commit access to the freebsd
source tree. Can anyone comfirm this for me?
I currently have a highpoint 2220 controller. I got it because of
I just wanted to get it straight. I think I read some post that said
that 3ware actually has and uses commit access to the freebsd source
tree. Can anyone comfirm this for me?
I currently have a highpoint 2220 controller. I got it because of the
Freebsd support what appeared to be available
On Thu, Jul 27, 2006 at 10:45:07PM -0600, Chad Leigh -- Shire.Net LLC wrote:
>
> Do you have a securelevel set in rc.conf
>
> kern_securelevel_enable="YES"
> kern_securelevel="1"
>
> where the number is > 0
Good point, I neglected to mention that. No, I'm not running secure:
> sudo sy
On Jul 27, 2006, at 10:40 PM, Michael R. Wayne wrote:
Tonite I was going to allocate some more disk space to a 6.1 RELEASE
system. I did it the same way I've done it for years: I went into
sysinstall, selected
Custom->Partition
and added a new partition (twed0s3) using some of the remaini
Tonite I was going to allocate some more disk space to a 6.1 RELEASE
system. I did it the same way I've done it for years: I went into
sysinstall, selected
Custom->Partition
and added a new partition (twed0s3) using some of the remaining
space. I then moved up to twed0s1 and did an "S" becau
Thanks for your kind reply and sorry for the delay :-)
This speed issue has gone away after I upgrade my OS to FreeBSD
6.1-RELEASE. Anyway, thanks again. :-)
On 6/6/06, N.J. Thomas <[EMAIL PROTECTED]> wrote:
* Yuan, Jue <[EMAIL PROTECTED]> [2006-06-06 18:31:43 +0800]:
> The situation is: a comp
Just an appendum, but this is what I'm seeing in /var/log/messages right
now:
Jul 28 00:22:37 io kernel: Limiting icmp unreach response from 6255 to 200
packets/sec
Jul 28 00:22:38 io kernel: Limiting icmp unreach response from 6515 to 200
packets/sec
Jul 28 00:22:39 io kernel: Limiting icmp
Two part question here ...
first part ... is there a way of just disabling icmp by setting a sysctl,
so that a server just doesn't respond to them?
second part ... is there a way of telling a cisco switch to drop all icmp
packets, preferrably to all but an exception list, but to everywhere w
On 7/27/06, Marwan Sultan <[EMAIL PROTECTED]> wrote:
Hello everyone,
I was trying to install linux-flashplugin7 and in the same time was
trying
to play with libmap.conf
then suddenly my system crush!
after reboot, i got this error message
Enter full pathname of shell or RETURN for /bin
To whom may concern:
My name is Jesus Granados, I write to you from Mexico and I want to ask you
about VIA EPIA VT-310 DP.
Do you know if it is certified or tested with FreeBSD?
We want to install FreeBSD with PFsense as Firewall.
I hope you can help me.
Regards
Jesus Granados
"El Valor de las
On Thu, 27 Jul 2006, at 09:03:41 +, Marwan Sultan wrote:
> Hello everyone,
>
Hi Marwan.
> I was trying to install linux-flashplugin7 and in the same time was trying
> to play with libmap.conf
> then suddenly my system crush!
>
> after reboot, i got this error message
>
> Enter full pat
On Jul 27, 2006, at 5:41 PM, Born, Clinton wrote:
Really? I wouldn't want such a myopic view when choosing to
allocate our
shareholders dollars. Best tool for the job. Period!
That is not as easy as you make it out to be. WHat one might in the
short term see as the best tool may not be s
Really? I wouldn't want such a myopic view when choosing to allocate our
shareholders dollars. Best tool for the job. Period!
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Amitabh Kant
Sent: Thursday, July 27, 2006 11:28 AM
To: Nikolas Britton
Cc: freebs
>
> After loading ichsmb, smbus and smb, dmesg reports:
>
> ichsmb0: port
> 0x1880-0x189f irq 10 at device 31.3 on pci0
> ichsmb0: [GIANT-LOCKED]
> smbus0: on ichsmb0
> smb0: on smbus0
>
>
> Then, mbmon -d -S gives:
>
> [EMAIL PROTECTED]:/usr/home/sveinhal]$ mbmon -d -S
> SMBus[Intel8XX
eoghan wrote:
Hi
I have a user that I use for doing the odd bit of work on my
freebsd-6.1-RELEASE machine.
I wanted to set apache to work from:
/home/user/public_html/
instead of the default location. I can create these folders no
problems but i have to do it as root:
mkdir /home/user/public_
> Svein Halvor Halvorsen wrote:
>> After loading ichsmb, smbus and smb, dmesg reports:
:
Erik Nørgaard wrote:
> kldload smb?
What did I just say? (quoted as a hint :-P)
Svein Halvor
signature.asc
Description: OpenPGP digital signature
doug wrote:
On Wed, 26 Jul 2006, RW wrote:
On Wednesday 26 July 2006 16:23, Joshua Lewis wrote:
KDE seems like it is bloated so I was considering Gnome. I have also
been reading about enlightenment and it sounds interesting. I have
looked into Fluxbox and it also seems like it woul
On 7/28/06, eoghan <[EMAIL PROTECTED]> wrote:
Hi
I have a user that I use for doing the odd bit of work on my
freebsd-6.1-RELEASE machine.
I wanted to set apache to work from:
/home/user/public_html/
instead of the default location. I can create these folders no
problems but i have to do it as r
Joshua Lewis wrote:
Would I be better off just going with Gnome or KDE? I realize once I
start installing apps that I will probably wind up installing
something that uses Gnome or KDE libraries so I am going to wind up
bloating my system any ways right?
Look at them both and make
On 7/26/06, Joshua Lewis <[EMAIL PROTECTED]> wrote:
I have a hard question to ask and I realize that there are a thousand
answers to this question.
I am replacing my XP system with a FreeBSD 6.1 system. I finished
installing it last night and cvsuped. Now I need to choose a window
> On the switch side of things I'm using a Cisco 3550 runing layer3
> code, I've had this working before with a em driver (on another box)
> but my setup was a little different then so I'm pretty sure the switch
> isnt at fault?
Is the vr interface capable of sending > 1500 byte MTUs? Its not in t
Icewm since noone else mentioned it. It is small and light, very
attractive (I think) and is quite windows like in its look so windows
users find it quite accessible. Fluxbox is also nice if you want
something light but I chose icewm over fluxbox when setting up pentium 1
desktops for windows u
Hi
I have a user that I use for doing the odd bit of work on my
freebsd-6.1-RELEASE machine.
I wanted to set apache to work from:
/home/user/public_html/
instead of the default location. I can create these folders no
problems but i have to do it as root:
mkdir /home/user/public_html/
How do
Svein Halvor Halvorsen wrote:
> After loading ichsmb, smbus and smb, dmesg reports:
>
> ichsmb0: port 0x1880-0x189f irq
> 10 at device 31.3 on pci0
> ichsmb0: [GIANT-LOCKED]
> smbus0: on ichsmb0
> smb0: on smbus0
>
>
> Then, mbmon -d -S gives:
>
> [EMAIL PROTECTED]:/usr/home/sveinhal]$ mbmon
And this is what I always do. As a person responsible for
recommending/approving/buying harware related stuff for few different
companies, I make it a point that I *prefer* only those brands that
have support for FreeBSD. For me, this is more so in case of RAID
cards.
On 7/27/06, Nikolas Britton
Hi,
As anyone been successful at using xircom cardbus cards under freebsd ?
When the system boots, the modem gets detected, the network card also
(as DC0) but I get a bunch of these messages:
CARDBUS1 Ressource Not Specified in CIS
No Station address in CIS
If I remove the card while bootin
Lowell Gilbert wrote:
Don't top-post, please.
LOL sorry, it came from my cell phone, i updated to 6.1 - Release,
hopefully i'll have better luck, i'll keep you posted.
smime.p7s
Description: S/MIME Cryptographic Signature
On Thu, Jul 27, 2006 at 12:50:57PM -0500, Nikolas Britton wrote:
>
> Except most of the people using FreeBSD in a professional setting are
> pretty high up on the IT/IS/MIS food chain. If a product doesn't work
> on my platform of choice then there's no way in hell I'll approve it's
> uses on othe
On 7/27/06, PATRICK CARTER <[EMAIL PROTECTED]> wrote:
Hey all,
I was looking at getting a hardware RAID controller (that supports RAID 5) for
my system and I saw the FastTrak SX4100 from Promise Technology. I didn't see
FreeBSD listed under their list of supported operating systems and I was
PATRICK CARTER wrote:
> I did not see it listed and afaik there is no official support. The nearest
> thing I saw was a manual entry on ataraid from quite a while back suggesting
> that RAID 5 wasn't supported, but I was wondering if anyone had managed to
> get any success with the card (since
On 7/27/06, jan gestre <[EMAIL PROTECTED]> wrote:
On 7/27/06, Giorgos Keramidas <[EMAIL PROTECTED]> wrote:
>
> On 2006-07-26 18:59, Gerard Seibert <[EMAIL PROTECTED]> wrote:
> >Darrin Chandler wrote:
> >> Do you see that if support in 4.x had been based on open specs from
> >> Adaptec that this i
After loading ichsmb, smbus and smb, dmesg reports:
ichsmb0: port 0x1880-0x189f irq
10 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: on ichsmb0
smb0: on smbus0
Then, mbmon -d -S gives:
[EMAIL PROTECTED]:/usr/home/sveinhal]$ mbmon -d -S
SMBus[Intel8XX(ICH/ICH2/ICH3/ICH4/ICH5/ICH6)] f
I did not see it listed and afaik there is no official support. The nearest
thing I saw was a manual entry on ataraid from quite a while back suggesting
that RAID 5 wasn't supported, but I was wondering if anyone had managed to get
any success with the card (since from my understanding ataraid
Steel City Phantom wrote:
[ ... ]
i have eliminated all hardware in between the two systems. i dumped the
traffic with tcpdump and the machine does actually receive the data. me
and my team of developers are stumped, jboss support is stumped, i was
wondering if any of you guys could think of
PATRICK CARTER wrote:
Hey all,
I was looking at getting a hardware RAID controller (that supports RAID 5) for
my system and I saw the FastTrak SX4100 from Promise Technology. I didn't see
FreeBSD listed under their list of supported operating systems and I was
wondering if anyone knew weathe
- Original Message -
From: "Nikolas Britton" <[EMAIL PROTECTED]>
To: "Ted Mittelstaedt" <[EMAIL PROTECTED]>
Cc: "Greg Barniskis" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>; ; "Nick Withers"
<[EMAIL PROTECTED]>
Sent: Wednesday, July 26, 2006 11:38 PM
Subject: Re: Are har
im running bas 6.1, java 1.5 and jboss 4. i have a servlet that
interfaces with a bank over a socket connection. pretty basic setup.
everything works fine for the current two banks that we interface with.
i am in the process of trying to bring up a third bank. the socket
opens correctly, t
>From "man portupgrade"...
1) Try a "pkgdb -fu"
2) If it doesn't work, remove the database file at
(/var/db/pkg/pkgdb.db) and
3) Rerun "pkgdb -fu"
Hope this helps...
--
Bryan
Joshua Lewis <[EMAIL PROTECTED]> wrote:
I am setting up a new system and ran a portupgrade -a. Unfortunately
On 7/27/06, Charles Swiger <[EMAIL PROTECTED]> wrote:
On Jul 26, 2006, at 5:46 PM, Chris T. wrote:
> I am trying to create a home mail gateway. First thing is getting
> it to relay messages to my ISP as if I had connected directly to
> the isp in the first place.
Set:
relayhost = [mailserver.
On Thursday 27 July 2006 07:05, Joshua Lewis wrote:
>I am setting up a new system and ran a portupgrade -a. Unfortunately I
>also in my arrogance tried to run XDM while the portupgrade was
>running. Well to make a long story short I could not exit out of XDM
>and get back to my cons
On 7/27/06, Giorgos Keramidas <[EMAIL PROTECTED]> wrote:
On 2006-07-26 18:59, Gerard Seibert <[EMAIL PROTECTED]> wrote:
>Darrin Chandler wrote:
>> Do you see that if support in 4.x had been based on open specs from
>> Adaptec that this issue would not exist? Adaptec is controlling your
>> abilit
- Original Message -
From: "Greg Barniskis" <[EMAIL PROTECTED]>
To: "Ted Mittelstaedt" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
; "Nick Withers" <[EMAIL PROTECTED]>
Sent: Thursday, July 27, 2006 7:36 AM
Subject: Re: Are hardware vendors starting to bail on FreeBSD
I am setting up a new system and ran a portupgrade -a. Unfortunately I
also in my arrogance tried to run XDM while the portupgrade was
running. Well to make a long story short I could not exit out of XDM
and get back to my console and had to reboot the system. Now I get an
error tha
I'm sorry, I think I didn't explain it very well...
When I choose the media type, a message is shown warning that '...this is
the last chance... we can take no responsabillity". I hit 'ok' and then a
message appears saying 'writing partitions...' and a few seconds later
appears one message saying
Ted Mittelstaedt wrote:
Calling for testing is pretty much a way of excusing the claim. People
including Danial, have done the testing in the past, posted the results,
then had armchair quarterbacks pick apart the test methodology claiming
the tests were done wrong, thus irrelevant. So why eve
Hey all,
I was looking at getting a hardware RAID controller (that supports RAID 5) for
my system and I saw the FastTrak SX4100 from Promise Technology. I didn't see
FreeBSD listed under their list of supported operating systems and I was
wondering if anyone knew weather or not anyone knew if
Thank you to everyone who gave me some ideas. That was a great help.
It looks like I am going to need to install more then one WM and just
figure out which one suits my needs the best. Thanks again.
Sincerely,
Joshua Lewis
___
freebsd-ques
How many out there are *still* running 4.x on their servers and desktops, for
similar fears?
We still have some old Compaq ML530 machines running FreeBSD 4.11-RELEASE-p17.
They provide essential web services, mainly authentication and MySQL databases.
FreeBSD 5.x and 6.0 can't boot on this har
I have a hard question to ask and I realize that there are thousand answers to
this question.
Here's a quick URL which can help decide on which Window Manager one
might use. It has a comprehensive list of many WM with descriptions
and screenshots.
http://en.wikipedia.org/wiki/Window_manager
H
Hi list,
I'm trying to get a FreeBSD 5.3-RELEASE (running GENERIC kernel) to do
vlan tagging.
I want to have several 'vlan interfaces' that can talk to their local
subnet and also use a default route.
On the switch side of things I'm using a Cisco 3550 runing layer3
code, I've had this working
Don't top-post, please.
"Rob Connon (Info)" <[EMAIL PROTECTED]> writes:
> The system completly locks up, attached keyboard is useless.. and as
> mentioned no errors.. the only pattern is tuesday/wednesday it
> freezes.. other days of the week it's fine under heavy load..
> buildworlds are not a p
Elijah Savage <[EMAIL PROTECTED]> writes:
> Running 6.1 fresh install one of my routines after installing is
> updating the locate database but I am getting errors and it is not
> fulling updating.
>
> locate: integer out of +-MAXPATHLEN (1024): 1027
> locate: integer out of +-MAXPATHLEN (1024): 1
"adrian esquivel" <[EMAIL PROTECTED]> wrote:
>>I had similar errors reported when I tried to install FreeBSD from a
>>CDRom drive which was connected to the motherboard with a standard
>>udma(33?) ribbon cable (Yes write errors). Make sure your connectors
>>are the better 80 conductor ones.
>
>Th
I am trying to install KDE to lauch athe graphical interface at start up.
I am recieving the following errors
X server for display :0 terminated unexpectedly
Uable to fire up local display :0; disabling
I have tried several variations to over for a several days trying get it to
work.
Any
On 7/27/06, Ted Mittelstaedt <[EMAIL PROTECTED]> wrote:
- Original Message -
From: "Greg Barniskis" <[EMAIL PROTECTED]>
To: "Ted Mittelstaedt" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
; "Nick Withers" <[EMAIL PROTECTED]>
Sent: Monday, July 24, 2006 11:59 AM
Subje
Thank you people, for the many ideas, that have been giving,
im in process of testing it.
Again, thanks for the ideas, hint and answer.
thats why freebsd rocks, there is a complete army behind it.
Marwan
On Tue, 25 Jul 2006, Marwan Sultan wrote:
Hello everyone,
Well, because really i didno
Hello everyone,
I was trying to install linux-flashplugin7 and in the same time was trying
to play with libmap.conf
then suddenly my system crush!
after reboot, i got this error message
Enter full pathname of shell or RETURN for /bin/sh:
When i hit enter this error comes
/libexec/ld-elf
On 26 Jul Richard Collyer wrote:
>
> On Wed, July 26, 2006 8:37 am, dick hoogendijk wrote:
> > All of a sudden mail to this list is rejected. My IP can't be found.
> > It always was, so this is weird. I checked with a "dig
> > @large.world.ns" and a few others and they all resolved my name / IP
>
Hello. I'm a blind user, and was wondering how to get 6.1-release to
install over serial. I've tried everything - hitting option 6, space,
boot -h , but nothing happens. unplugging the keyboard, nothing
happens. hitting space and typing boot -h - nothing. This is using a
cdrom disc1.
Any help would
65 matches
Mail list logo
