Re: large mail broken - qmail
Problem solved: bad network card. On 2/4/07, Cristian Mijea [EMAIL PROTECTED] wrote: Not really a freebsd question, sorry. I have a mail server on a freebsd machine. Qmail+SpamAssasin+Clamav. At a first look, everything works just fine, but any lage atachement gets corrupted. Smaller mail is just fine. Removed the extras (qmail-scanner, clamav, spamassasin) and still the same. No problem receiving any mail, just when is sending it. Anyone had a similar problem ever? Regards! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: READ_DMA48 error interpretation
In freebsd-questions Digest, Vol 164, Issue 1 At Message: 19 On Mon, 5 Feb 2007 01:13:31 -0600 (CST) Richard Lynch [EMAIL PROTECTED] wrote: On Tue, January 16, 2007 3:21 pm, Chuck Swiger wrote: On Jan 16, 2007, at 1:13 PM, Richard Lynch wrote: I know the messages below mean the hard drive or IDE cards are having problems. But is this like RED ALERT or more like YELLOW or what? ... +ad1: TIMEOUT - READ_DMA48 retrying (1 retry left) LBA=404955007 +ad1: FAILURE - READ_DMA48 status=51READY,DSC,ERROR error=10NID_NOT_FOUND LBA=404955007 +g_vfs_done():ad1s1[READ(offset=207336931328, length=16384)]error = 5 If you have current backups, it's a yellow alert. Otherwise... And what do I do about it? umount and fsck everything a lot? Once should do :) It's possible to have read errors, from a write error say on unclean power removal, that don't indicate a drive fault at all. swap cards/drives around until it stops? Ignore it and pray? The latter is or at least was listed as a backup strategy in the docs :) Try installing the sysutils/smartmontools port and run a drive self- test. That will give you a much better assessment of the state of the drive and whether it is likely to completely fail in the next 24 hours... I ran the short test on the problem drives, and it said everything was fine. I'll try the long test at a later date. Show us the result of 'smartctl -a drive' after a test or two. Meanwhile, I turned on the smartd daemon, and am seeing two issues in the logs... #1. The drive temperatures seem ridiculously high to this naive reader, but what do I know?... 110 to 190 Celcius? Yikes... Or maybe that's normal? How hot is too hot? As [EMAIL PROTECTED] pointed out, 100C is too hot. I don't believe those 110 to 190 numbers at all and suspect a drive would melt down at anything near that. Maybe these are Farenheit temperatures? While perryh's advice about airflow and enclosures etc was spot on, I suspect you need to check whether your particular drives may need some corrective parameters if not fully covered by the smartctl database, as some tend to do. There are hints about this in smartctl(8) -v option. #2. Sequences like this show up a fair amount: Device: /dev/ad2, SMART Prefailure Attribute: 3 Spin_Up_Time changed from 152 to 153 Device: /dev/ad2, SMART Prefailure Attribute: 3 Spin_Up_Time changed from 153 to 152 Device: /dev/ad0, SMART Prefailure Attribute: 8 Seek_Time_Performance changed from 251 to 250 It'd be more useful to see these within the context shown by smartctl -a So is the real problem just that the drives are spun down and can't spin up fast enough? I can probably live with the consequences of that, and just go on with life -- The occasional HTTP request for an audio file will fail the first time, and they have to hit reload. This box is the fail-safe roll-over server for audio files that are all up online somewhere else managed by a professional (not me), so it's no surprise that the rare time-out on the real server also ends up with a drive spin up and failed request on the backup. Kind of annoying, I guess, to an end user, but forcing the drives to always be spinning is probably not a Good Idea. I don't know about that; while I wouldn't worry too much about spin-up times unless it's a major annoyance to clients, I've always subscribed to drives lasting much longer if left spinning. The server delivering this mail has spun its old IBM DTLA-something drive 24h/365d for nearly 9 years now, despite no aircon in a hot climate (up to ~45C in summer). Oh, here's a rather long excerpt of the log in case there's minutae within it that I've failed to include: http://l-i-e.com/smartd.log The output of smartctl -a for one or two of your drives would likely be much more indicative. I don't claim to be an expert in this at all, but some of us might spot any obvious anomalies. Cheers, Ian ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
How to update fstab (or other) in Single User (read only fs)
Hi all FreeBSD 6.2 i386 I need to edit fstab to delete a geom mirror dev in order to boot my PC and I can´t because when my computer boots find a problem in fstab (because geom mirror device not ok) and then go to Single User mode. In this mode I can´t edit fstab, because there is not editor working (I´ve tried ee, vi.. all says fs is readonly) How can I do this? I think there must be a way to do it, isn't it? thanks in advance Juan Coruña Desarrollo de Software Atlantico ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: How to update fstab (or other) in Single User (read only fs)
On 2/6/07, DSA - JCR [EMAIL PROTECTED] wrote: Hi all FreeBSD 6.2 i386 I need to edit fstab to delete a geom mirror dev in order to boot my PC and I can´t because when my computer boots find a problem in fstab (because geom mirror device not ok) and then go to Single User mode. In this mode I can´t edit fstab, because there is not editor working (I´ve tried ee, vi.. all says fs is readonly) How can I do this? I think there must be a way to do it, isn't it? thanks in advance Juan Coruña Desarrollo de Software Atlantico ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] You have to remount / rw, try mount -uw / from the command line prompt you get when you are in single user mode, then use vi /etc/fstab or /rescue/vi /etc/fstab if the regular vi won't work. HTH! //Niclas -- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
syslog from Cisco - FreeBSD not working
Hi, I'm running into a problem configuring my syslogd in order to accept messages from Routers (Cisco). Here's what I did in my syslog.conf: local7.*/var/log/cisco-syslog Fields are separated by tabs of course In /etc/rc.conf I've got the following: syslogd_flags=-a 192.168.0.0/16 matching my local network. Unfortunately I don't see anything in my syslog from the router(s). I fired up tcpdump and sure enough the syslog-packets originating from the router hit my machine. To further track this down I changed the above line in syslog.conf to read +myrouter local7.*/var/log/cisco-syslog +* Again, no syslog messages. Next try: /etc/syslog.conf: local7.*/var/log/debug.log Again, no entry in the log Sure enough I restared syslogd between every test; also I have the fields in syslog.conf separted by tabs and the log-files in questions are existent with and chmod-ed 600. Any ideas what could be wrong here - or put in another way - has anybody out there got logging from Ciscos towards a FreeBSD box running? TIA for your help! -ewald ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: [freebsd-questions] syslog from Cisco - FreeBSD not working
Ewald Jenisch wrote: To further track this down I changed the above line in syslog.conf to read +myrouter local7.*/var/log/cisco-syslog +* What I did to get this working was (in syslog.conf): +printserver !* *.* /usr/log/printserver.log AND in /etc/hosts: 10.1.1.8printserver so that the 'printserver' name is resolved. No doubt a reverse DNS entry would have done the job too. My syslogd command line is like yours. Hope that might help... Howie ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: memory above 4Gb ignored
In response to Jim Pazarena [EMAIL PROTECTED]: I do not see any reference to resolving the 786432K of memory above 4Gb ignored anywhere in Google or otherwise. I see references to it for FreeBSD 4.XX, but I am running 6.2, and have the same problem. Is there any easy solution? For a hoot, I installed SuSe 10.2 on my machine and it recognized the full 4Gb; FreeBSD does not. Your searches didn't find this?: http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/troubleshoot.html#PAE -- Bill Moran Collaborative Fusion Inc. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: User Monitoring
In response to David Schulz [EMAIL PROTECTED]: Hello all, i would like to provide a SSH Login for selected people on a dedicated Machine, to be a little bit of a playground to some who dont have any Unix experience and so on. Without a doubt i will get the one or the other trying to do something nasty to the Box, so my question is how to keep track of what Users are doing? Using process accounting as described http:// www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/security- accounting.html in the handbook? Can you share some easy to implement tricks to keep the worst from happening to my Machine? Have a look at security/sudosh ... it won't prevent anything, but it will allow you to monitor what folks do. -- Bill Moran Collaborative Fusion Inc. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: question about BSD time
In response to Alaa Alomari [EMAIL PROTECTED]: Bill Moran [EMAIL PROTECTED] wrote: In response to Alaa Alomari : [Please wrap your lines around 72 characters or so] Dear sir; I have a Unix BSD server, and i want to adjust the time of the server so i have used the following command: $ sudo date 0702050402 and the output is: Mon Feb 5 04:02:00 EET 2007 and when typing date command again, i have got the following output: Mon Feb 5 09:38::51 EET 2007 so would you please, tell me how can i fix the time (note: i am using the root) Thank you for your attention. You are doing it correctly. Is it possible that you have something running that is changing the time? (ntp, perhaps). What happened between the time you set the time and when it reset itself? Also, check your system's securelevel setting, which will prevent manual time changes (or limit them to 1s). See the man page for date and securelevel. Dear Mr. Bill Moran; it is right, my securelevel is 2 but when i try to lower it, i get the message operation not permitted i did it as follow: $sudo sysctl -w kern.securelevel=-1 THE RESULT IS AS FOLLOW: kern.securelevel: 2 sysctl: kern.securelevel: Operation not permitted So, would you please tell me how can i change the securelevel in order to change the time and then set it (the securelevel) back. Thank you for your attention. It is considered rude to take discussions off the mailing list unless it has been agreed upon beforehand -- I have added [EMAIL PROTECTED] back in to the CC. Additionally, top-posting is discouraged on these mailing lists. I have corrected the format and responded in-line below. Additionally, you seemed to have ignored my request to format your emails better by wrapping your lines. In any event, you can't lower the securelevel on a running system -- that would defeat the purpose. Modify the setting in /etc/rc.conf and reboot your system. -- Bill Moran Collaborative Fusion Inc. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
syslog behaving differently with -d (was: syslog from Cisco - FreeBSD not working)
On Tue, Feb 06, 2007 at 12:00:09PM +0100, Ewald Jenisch wrote: Hi, I'm running into a problem configuring my syslogd in order to accept messages from Routers (Cisco). Here's what I did in my syslog.conf: local7.*/var/log/cisco-syslog Hi, A couple of hours after my original question I found out an interesting point: When running syslogd with the -d (debug-flag) messages get written into the file configured in /etc/syslog.conf - when running without the debug-flag nothing gets written. To be specific: With the above syslog.conf entry and /etc/rc.conf containting 'syslogd_flags=-d' I get the following output on the console: cvthname(192.168.9.95) logmsg: pri 275, flags 0, from switch1-1, msg 1390: Feb 6 13:59:40 MET: %SYS-5-CONFIG_I: Configured from console by ej1 on vty0 (192.168.9.16) Logging to FILE /var/log/cisco-syslog Sure enough this log message is in the cisco-syslog file. As soon as I turn off debug in syslog (i.e. running without the -d flag) nothing gets written to the cisco-syslog file. Why are messages only written to the file when running syslogd in debug mode?? TIA for any clue, -ewald ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 6.x, 4.x ipfw/dummynet pf/altq - network performance issues
On 06/02/07, Justin Robertson [EMAIL PROTECTED] wrote: I've actually already done everything you've suggested with little or no impact at all. One point where we have different results is with ADAPTIVE_GIANT, I actually noticed a drop of about 50kpps thruput when disabling it. Hmm I am surprised not more attention has been brought by your observations, I have noticed myself freebsd 4.x holds up much better during ddos then 5.x and 6.x probably due its better robustness and lighter code. I do hope but will probably be dissapointed stability and robustness is on the todo list for the devs in aiming to get 6.x to where 4.x was. Chris ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Question:encryption tool
Roland Smith writes: I am looking for any suggestion on using the right tool that I can use to perform the encryption/decryption for flat files. You can encrypt files with AES using ccrypt. http://ccrypt.sourceforge.net/ Both ccrypt and ncrypt are available as ports. Robert Huff ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Portmanager - not working after ports change
On Mon, 5 Feb 2007 09:14:16 -0800 (PST) White Hat [EMAIL PROTECTED] wrote: There was a change in the ports system - /usr/ports/UPDATING 20070205 - which now renders portmanager unable to run correctly. While it is possible to update a single port; i.e., portmanager /path/to-port/, if I attempt to do a general ports update; i.e., portmanager -u, I receive the following error message: percentDone-=0 = 100 - ( 100 * ( oldPortsDbQTY-=6 / oldPortsDbTOTALIZER-=6 )) cd: can't cd to /usr/ports/sysutils/portmanager rBsdPortMkPatch 0.4.1_7 error: bsd.port.mk /usr/ports/Mk unable to restored from back up cp /usr/local/share/portmanager/bsd.port.mk-BACKUP /usr/ports/Mk/bsd.port.mk I tried deinstalling portmanager and then installing it from its new port directory; however, that failed to alleviate the problem. Has anyone else experienced this problem, and perhaps have a solution? Probably it's just that someone need to patch it to change sysutils/portmanager to ports-mgmt/portmanager in the source. As a workaround try linking portmanager's new port directory to where its old one was. As there will be a MOVED entry it's probably best to use it with the new origin, but make sure portmanager is up-to-date before running it on multiple ports, it wont be able to detect a self-update, and it doesn't like to do that as part of a general ports' update. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Error upgrading Azureus
Warren Liddell writes: Running FreeBSD 6.2-STABLE BUILD FAILED Worked for me - running -CURRENT - within the last week. Robert Huff ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Portmanager - not working after ports change
On Tuesday February 06, 2007 at 08:19:27 (AM) RW wrote: Probably it's just that someone need to patch it to change sysutils/portmanager to ports-mgmt/portmanager in the source. As a workaround try linking portmanager's new port directory to where its old one was. As there will be a MOVED entry it's probably best to use it with the new origin, but make sure portmanager is up-to-date before running it on multiple ports, it wont be able to detect a self-update, and it doesn't like to do that as part of a general ports' update. I reported this problem around 10 am. yesterday. Sometime around 2 pm. a patch was submitted. An updated version of 'portmanager' was in the port's system by 4 pm. Personally, I consider that a rather quick fix. Yes, you will have to do a regular 'make install' to get the newer version installed. You have to do a 'make deinstall' to remove the older version first though. -- Gerard Mail from '@gmail' is rejected and/or discarded here. Don't waste your time! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: [freebsd-questions] syslog from Cisco - FreeBSD not working
Howard Jones wrote: Ewald Jenisch wrote: To further track this down I changed the above line in syslog.conf to read +myrouter local7.*/var/log/cisco-syslog +* What I did to get this working was (in syslog.conf): +printserver !* *.* /usr/log/printserver.log AND in /etc/hosts: 10.1.1.8printserver so that the 'printserver' name is resolved. No doubt a reverse DNS entry would have done the job too. My syslogd command line is like yours. Also, the -a flag may be used with syslogd. Hope that might help... Howie ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] Regards, -- .O. | Daniel Molina Wegener | C/C++ Developer ..O | dmw [at] unete [dot] cl | FOSS Coding Addict OOO | FreeBSD Linux User| Standards Rocks! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Makefile knobs
Hello, I have a question regarding the various knobs one can set while building a port. The problem as I see it is that the user usually has to be a makefile lingo expert (okay, not an expert, but you catch my drift) to decipher all the various options and set perhaps only the one he really needs. So, my question is: is there a port that does that for you? Reads makefile options from a makefile and prints them out in a nicely ordered way to you? If there's no such port, is it actually possible to create one (meaning is it possible to get needed information from a makefile in an automated fashion)? Thanks, -- Nino ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Question:encryption tool.
Thanks a lot, Our current backup system is veritas netbackup, and changing that to entire bacula is best thing for me, May I ask why you would prefer Bacula over NetBackup? I'm just curious, because having worked with both, I personally prefer NetBackup. so they wanted me encrypt these files, that is on the backup location before the netbackup scheduler picks up these files. Database is getting backed up to a disk location and from there netbackup agent picks up and writes it into the tape , but we have these 13 flat files that go into offsite which really needs encryption and decryption logic in place upon after restore back to disk . If those databases are all Oracle instances, then you might want to take a look at Oracle Secure Backup. It does exactly what you need. More info here: http://www.oracle.com/technology/products/secure-backup/index.html Cheers, David -- David Robillard UNIX systems administrator Oracle DBA CISSP, RHCE Sun Certified Security Administrator Montreal: +1 514 966 0122 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 6.x, 4.x ipfw/dummynet pf/altq - network performance issues
At 08:03 AM 2/6/2007, Chris wrote: On 06/02/07, Justin Robertson [EMAIL PROTECTED] wrote: I've actually already done everything you've suggested with little or no impact at all. One point where we have different results is with ADAPTIVE_GIANT, I actually noticed a drop of about 50kpps thruput when disabling it. Hmm I am surprised not more attention has been brought by your observations, I have noticed myself freebsd 4.x holds up much better during ddos then 5.x and 6.x probably due its better robustness and lighter code. When I ran through the tests with pmc compiled in there wasnt any obvious areas where it was spending a lot of time. What I was told was that the locking overhead was a big penalty and more emphasis was put on correctness than speed going from RELENG_4 to RELENG_5 and above. Supposedly the payoff will come as more CPU cores get added as there is better potential to scale with this design. While I did see some improvement in the box with SMP compiled in, it still has a ways to go for this application I do hope but will probably be dissapointed stability and robustness is on the todo list for the devs in aiming to get 6.x to where 4.x was. I have found stability to be quite good. But certainly as a firewall or router, the speed is not there yet. ---Mike ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
A VERY Strange Question.
Hi all, SInce the inception of out company in 1998, we have been using FreeBSD exclusively, and will continue to use it and contribute where we can. Due to many client requests, we may be forced into offering a Microsoft Server Solution as well. I would like to discuss the MS setup with someone familiar with bot FreeBSD and Server 2003 for intigration reasons. If people want, we can keep a thread on FreeBSD as others might be able to use some info. Anyoneone willing to discuss on/off list? -Grant ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Portmanager - not working after ports change
On Tue, 06 Feb 2007 08:37:15 -0500 Gerard Seibert [EMAIL PROTECTED] wrote: I reported this problem around 10 am. yesterday. Sometime around 2 pm. a patch was submitted. An updated version of 'portmanager' was in the port's system by 4 pm. Personally, I consider that a rather quick fix. I see it has a maintainer now. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: phpMyAdmin httpd segmentation fault
On Tue, Feb 06, 2007 at 07:14:02AM +, Matthew Seaman wrote:
Terry Todd wrote:
On Mon, Feb 05, 2007 at 07:07:25AM -0800, Garrett Cooper wrote:
Terry Todd wrote:
On Sun, Feb 04, 2007 at 09:36:58AM +, Matthew Seaman wrote:
Terry Todd wrote:
I installed FreeBSD 6.2-RELEASE, php-5.1.6_3, php5-extensions-1.0,
mysql-5.0.27 and apache_1.3.37_1.
php -i now works Ok after I moved recode.so to the top of the list
of extensions in extensions.ini. It took a while to figure that
one out. Before that php -i would seg fault and core dump. It
took some google searching and using gdb on the core file to fix
it.
A test web page for phpinfo works fine too. Mysql works OK from
the command line.
However I can't get phpMyAdmin to work. It seg faults in reading
/usr/local/www/phpMyAdmin/libraries/url_generating.lib.php
There is no core dump produced.
Hmmm... very strange. We have just built a RELENG_6_2 server with
apache13-ssl, php5 and phpMyAdmin and no such problems are apparent.
Did you modify the CFLAGS or otherwise change the level of
optimization used by the compiler?
No CFLAGS were changed or anything else. It's a very standard install.
I ran ktrace httpd -X
Then when I try to open the phpMyAdmin/index.php page in a browser
httpd seg faults.
Here is the tail of kdump from the ktrace.out from the above ktrace.
1372 httpdCALL gettimeofday(0xbfbf7158,0)
1372 httpdRET gettimeofday 0
1372 httpdCALL lstat(0xbfbf75b0,0xbfbf70f0)
1372 httpdNAMI /usr
1372 httpdRET lstat 0
1372 httpdCALL lstat(0xbfbf75b0,0xbfbf70f0)
1372 httpdNAMI /usr/local
1372 httpdRET lstat 0
1372 httpdCALL lstat(0xbfbf75b0,0xbfbf70f0)
1372 httpdNAMI /usr/local/www
1372 httpdRET lstat 0
1372 httpdCALL lstat(0xbfbf75b0,0xbfbf70f0)
1372 httpdNAMI /usr/local/www/phpMyAdmin
1372 httpdRET lstat 0
1372 httpdCALL lstat(0xbfbf75b0,0xbfbf70f0)
1372 httpdNAMI /usr/local/www/phpMyAdmin/libraries
1372 httpdRET lstat 0
1372 httpdCALL lstat(0xbfbf75b0,0xbfbf70f0)
1372 httpdNAMI
/usr/local/www/phpMyAdmin/libraries/url_generating.lib.php
1372 httpdRET lstat 0
1372 httpdCALL open(0x845eda8,0,0x1b6)
1372 httpdNAMI
/usr/local/www/phpMyAdmin/libraries/url_generating.lib.php
1372 httpdRET open 4
1372 httpdCALL fstat(0x4,0x8102748)
1372 httpdRET fstat 0
1372 httpdCALL lseek(0x4,0,0,0,0x1)
1372 httpdRET lseek 0
1372 httpdCALL read(0x4,0x82e3028,0x2000)
1372 httpdGIO fd 4 read 4096 bytes
?php
/* $Id: url_generating.lib.php,v 2.12.2.1 2006/09/26 19:23:24
lem9 Exp $ */
// vim: expandtab sw=4 ts=4 sts=4:
/**
* URL/hidden inputs generating.
*/
/**
* Generates text with hidden inputs.
*
* @see PMA_generate_common_url()
* @param string optional database name
* @param string optional table name
* @param int indenting level
*
* @return string string with input fields
*
* @global string the current language
* @global string the current conversion charset
* @global string the current connection collation
* @global string the current server
* @global arraythe configuration array
* @global boolean whether recoding is allowed or not
*
*
* @access public
*
* @author nijel
*/
function PMA_generate_common_hidden_inputs($db = '', $table =
'', $indent = 0, $skip = array())
{
if (is_array($db)) {
$params = $db;
$_indent = empty($table) ? $indent : $table;
$_skip = empty($indent) ? $skip : $indent;
$indent = $_indent;
$skip= $_skip;
} else {
$params = array();
if (isset($db) strlen($db)) {
$params['db'] = $db;
}
if (isset($table) strlen($table)) {
$params['table'] = $table;
}
}
if (! empty($GLOBALS['server'])
$GLOBALS['server'] != $GLOBALS['cfg']['ServerDefault'])
{
$params['server'] = $GLOBALS['server'];
}
if (empty($_COOKIE['pma_lang'])
! empty($GLOBALS['lang'])) {
$params['lang'] = $GLOBALS['lang'];
}
if (empty($_COOKIE['pma_charset'])
! empty($GLOBALS['convcharset'])) {
$params['convcharset'] = $GLOBALS['convcharset'];
Re: Makefile knobs
On Tue, 6 Feb 2007 14:14:29 +0100 n j [EMAIL PROTECTED] wrote: Hello, I have a question regarding the various knobs one can set while building a port. The problem as I see it is that the user usually has to be a makefile lingo expert (okay, not an expert, but you catch my drift) to decipher all the various options and set perhaps only the one he really needs. So, my question is: is there a port that does that for you? Reads makefile options from a makefile and prints them out in a nicely ordered way to you? If there's no such port, is it actually possible to create one (meaning is it possible to get needed information from a makefile in an automated fashion)? The portsopt might be what you're looking for: Shows WITH(OUT)-knobs of a port makefile and if you want also the knobs of all port dependencies. WWW: http://www.chruetertee.ch/portsopt/ It has recently moved from the sysutils category to ports-mgmt category. Its location will depend on when you last updated your ports tree. While it will show various knobs, their purpose may not be apparent without further investigation. There are quite a few ports that have an options screen which you can access by first doing a make config before building and selecting options. It will store those options in /var/db/ports/... directories and use them for future builds (man 7 ports for more info). I would suspect that more ports will use this approach in the future. HTH, Randy -- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error upgrading Azureus
Robert Huff wrote: Warren Liddell writes: Running FreeBSD 6.2-STABLE BUILD FAILED Worked for me - running -CURRENT - within the last week. Robert Huff From pkg_tree: azureus-2.5.0.0_2 |\__ libdrm-2.0.2 |\__ pkg-config-0.21 |\__ xorg-fonts-encodings-6.9.0_1 |\__ jpeg-6b_4 |\__ expat-2.0.0_1 |\__ libiconv-1.9.2_2 |\__ png-1.2.14 |\__ freetype2-2.2.1_1 |\__ perl-5.8.8 |\__ fontconfig-2.3.2_6,1 |\__ gettext-0.14.5_2 |\__ libxml2-2.6.27 |\__ xorg-libraries-6.9.0_1 |\__ bitstream-vera-1.10_2 |\__ tiff-3.8.2_1 |\__ javavmwrapper-2.3 |\__ hicolor-icon-theme-0.9_2 |\__ glib-2.12.9 |\__ shared-mime-info-0.19 |\__ atk-1.12.4 |\__ cairo-1.2.6_1 |\__ xorg-fonts-truetype-6.9.0 |\__ libXft-2.1.7_1 |\__ diablo-jdk-1.5.0.07.01_1 |\__ gtk-2.10.9 \__ swt-devel-3.3M4 Based on your error it looks like you don't have swt-devel installed. You should update your ports tree, install swt-devel, and if that works let the maintainer know that it's missing that dependency. -Garrett ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
suggestion about freebsd as console server or kvm switch
Hi all I need the console server function to access the less than 4 servers in the data center. Do you think it is easy to buy cheap kvm or use freebsd to do it? lt is easy to setup using freebsd Thank you for your suggestion Get your own web address. Have a HUGE year through Yahoo! Small Business. http://smallbusiness.yahoo.com/domains/?p=BESTDEAL ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Upgrade from RELENG_4 to RELENG_5
I have done: cvsup RELENG_5 make buildkernel make installkernel All worked just fine ... but. When I reboot, the boot process picks up the old 4 kernel. How do I make the boot process pick up the new 5 kernel? What am I missing? hal ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
I'd like to do my bit to support FreeBSD
I've found quite a few tricks and techniques for handling FreeBSD's ports system when things go south. I'd like to add them to the handbook, adding, lets say 4.5.6 - When Ports Attack. OK, really it'd be more along the lines of 4.5.6 - Installing Ports When Things Go Wrong It would give hints that I've aquired over time from the mailing list, or my own use: 1) config-recursive (my most recent gem aquired from you nice people!) 2) Keeping flag-sets in your make.conf (basically several sets of CFLAGS/CXXFLAGS, so if something fails, you can quickly try something else) 3) How to remove a broken dependancy (read: how to figure the next port up, the list, and then configure that port to remove the dependancy) 4) Rolling back your ports tree to an earlier date or dates, but globally or one port at a time 5) determining which step will fix your problem. Now, as far as I know this would requre: 1) Downloading the doc group of the ports tree to it's own special directory, keeping the CVS flags in tact - I should be able to do this 2) Editing the file of interest - trivial beyond belief 3) ??Generating the file?? 4) ??Submitting the diffs?? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: VMware equivalent?
On Mon, Feb 05, 2007 at 04:51:31PM -0800, Kurt Buff wrote: Xen? Xen is an interesting system, but so far as I know, so far, it requires a Linux host - either Red Hat or Suse. Plus, unless you have the new Virtualizing chips from Intel or AMD, you have to make a special version of the OSen you plan to host with kernel modifications.I don't know if there is a version of FreeBSD for Sen yet or not. You can look. jerry On 2/5/07, Daniel Marsh [EMAIL PROTECTED] wrote: On 2/6/07, Chris Maness [EMAIL PROTECTED] wrote: Is there an open source equivalent to vmware? -- Bochs, Qemu, and there's another really cool one that I can't think of! :( ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: suggestion about freebsd as console server or kvm switch
On 2/6/07, Gable Barber [EMAIL PROTECTED] wrote: On 2/6/07, ann kok [EMAIL PROTECTED] wrote: Hi all I need the console server function to access the less than 4 servers in the data center. Do you think it is easy to buy cheap kvm or use freebsd to do it? lt is easy to setup using freebsd Thank you for your suggestion Perhaps this is what you are looking for: http://www.freebsd.org/doc/en_US.ISO8859-1/articles/console-server/index.html Good luck, Gable Forgot to cc the list..:D ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
syslog from Cisco - FreeBSD - SOLVED
Hi, First of all thanks much to all who responded so quickly to my question about setting up syslogging in order to accept messages from Cisco (remote) boxes. I could finally get that thing going. Here's what I did - maybe this is of help to others running into similar problems: 1) In order for syslogd to accept messages from remote machines you've got to use the -a-flag. Here's what I've got in my /etc/rc.conf: syslogd_flags=-a 192.168.0.0/16:* Don't forget the * - it makes sure that syslogd accepts UDP packets from *every* port on the remote machine, not just the syslog-port. Typically Cisco-boxes seem to have a high-order source-port in their syslog-messages. 2) /etc/syslog.conf: Make sure that the local7-messages coming from Cisco boxes aren't logged multiple times. Typically the vanilla /etc/syslog.conf coming with FreeBSD has the following line in /etc/syslog.conf (near the top of the file): *.notice;authpriv.none;kern.debug;lpr.info;mail.crit;news.err /var/log/message s change this to read *.notice;local7.none;authpriv.none;kern.debug;lpr.info;mail.crit;news.err /var/log/messages This makes sure that any syslog-messages with the local7 facility don't get written to /var/log/messages. Get to the end of syslog.conf. Here you'll find something like !ppp *.* /var/log/ppp.log These is the setup for log-entries from ppp. You've got to add the following line: !* This resets logging as per man syslog.conf(5): A program or hostname specification may be reset by giving the program or hostname as `*'. Without that line the lines that you add for your Cisco logging at the end of the file (see below) will only be triggered when coming from the ppp program which almost never is the case. (You can check this using the debug-option of syslogd - see below) 3) Add your log-setup for cisco devices at the end of syslog.conf like so: local7.*/var/log/Syslog/cisco-syslog 4) Touch and chmod 600 the logfile mentioned above 5) Restart syslogd: /etc/rc.d/syslogd restart Final thoughts caveats: 1) Use TABs to separate the entries in /etc/syslog.conf 2) Running syslog in debug-mode (i.e. syslogd_flags=-d... in etc/rc.conf) is a very helpful tool in tracking down problems. It keeps syslogd running in the foreground and logs very helpful information to the console Be aware though, that syslogd in debug-mode is behaving somewhat different. It e.g.seems to ignore the -a ... flags that are otherwise necessary in order for syslog to accept messages from remote machines, i.e. accepting messages from everywhere even without the -a flag. Hope this little receipe helps others going... Thanks again for all your help, -ewald ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I'd like to do my bit to support FreeBSD
In response to Jim Stapleton [EMAIL PROTECTED]: I've found quite a few tricks and techniques for handling FreeBSD's ports system when things go south. I'd like to add them to the handbook, adding, lets say 4.5.6 - When Ports Attack. OK, really it'd be more along the lines of 4.5.6 - Installing Ports When Things Go Wrong It would give hints that I've aquired over time from the mailing list, or my own use: 1) config-recursive (my most recent gem aquired from you nice people!) 2) Keeping flag-sets in your make.conf (basically several sets of CFLAGS/CXXFLAGS, so if something fails, you can quickly try something else) 3) How to remove a broken dependancy (read: how to figure the next port up, the list, and then configure that port to remove the dependancy) 4) Rolling back your ports tree to an earlier date or dates, but globally or one port at a time 5) determining which step will fix your problem. Now, as far as I know this would requre: 1) Downloading the doc group of the ports tree to it's own special directory, keeping the CVS flags in tact - I should be able to do this 2) Editing the file of interest - trivial beyond belief 3) ??Generating the file?? Start here: http://www.freebsd.org/doc/en_US.ISO8859-1/books/fdp-primer/index.html As you read through that, you'll probably be pleasantly surprised how well organized and automated everything is. I know I was. 4) ??Submitting the diffs?? Also covered in the above link. Once you've generated your docs (step #3) you can post your modified copy to your personal website and direct people to it to get feedback and suggestions. There's also a dedicated mailing list for the documentation project: http://lists.freebsd.org/mailman/listinfo/freebsd-doc which was very helpful when I was doing my first submits. Thanks for stepping up to help out! -- Bill Moran Collaborative Fusion Inc. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Upgrade from RELENG_4 to RELENG_5
On Tue, Feb 06, 2007 at 08:14:40AM -0700, hal wrote: I have done: cvsup RELENG_5 make buildkernel make installkernel All worked just fine ... but. When I reboot, the boot process picks up the old 4 kernel. How do I make the boot process pick up the new 5 kernel? What am I missing? If you have not already done so I suggest you read http://www.freebsd.org/releases/5.4R/migration-guide.html (and of course /usr/src/UPDATING) which describes how to upgrade from 4.x to 5.x. Follow those instructions closely - upgrading from 4.x to 5.x is somewhat complicated. -- Insert your favourite quote here. Erik Trulsson [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Upgrade from RELENG_4 to RELENG_5
On Tue, Feb 06, 2007 at 04:32:03PM +0100, Erik Trulsson wrote: On Tue, Feb 06, 2007 at 08:14:40AM -0700, hal wrote: I have done: cvsup RELENG_5 make buildkernel make installkernel All worked just fine ... but. When I reboot, the boot process picks up the old 4 kernel. How do I make the boot process pick up the new 5 kernel? What am I missing? If you have not already done so I suggest you read http://www.freebsd.org/releases/5.4R/migration-guide.html (and of course /usr/src/UPDATING) which describes how to upgrade from 4.x to 5.x. Follow those instructions closely - upgrading from 4.x to 5.x is somewhat complicated. And, while you are at it, seriously consider going to 6.x. Don't stay at 5.x unless you absolutely have to. jerry -- Insert your favourite quote here. Erik Trulsson [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: HP C-class Blade / Broadcom ethernet / SerDes controllers not supported
On Tue, Feb 06, 2007, Ewald Jenisch wrote: Maybe you can give it a try and check whether a current FreeBSD 7 works right and report back the result to the list. Thanks much for the info. Sure enough I'd like to try FreeBSD 7 but I'm running into kinda chicken-and-egg-problem here: With the box in question cut off the net (because the NIC isn't working) I wonder how I can get the FreeBSD 7 sources onto that box? Why not just get the latest ISO of FreeBSD 7? See [1]. Besides that - how/where should I fetch the FreeBSD 7 sources from? Hmm, the only way I can think of is fetching the sources in a working maching, make a tarball of it, burn it on CD and untar the sources in the blade. what cvsup-file should I use? Would changing *default release=cvs tag=RELENG_6 to something like *default release=cvs tag=RELENG_7 be enough? Actually tag would be *default release=cvs tag=., see [2] for details. But shouldn't matter if you go the ISO^H^H^Heasy ;) way. [1] ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/200702/ [2] http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvs-tags.html Cheers, -cs ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: VMware equivalent?
I have been running vmware, and it works very well, but if I can find a open source version that works well, I would like to move in that direction. Thanks for the tips guys. Chris Maness (909) 223-9179 http://www.chrismaness.com On Tue, 6 Feb 2007, Jerry McAllister wrote: On Mon, Feb 05, 2007 at 04:51:31PM -0800, Kurt Buff wrote: Xen? Xen is an interesting system, but so far as I know, so far, it requires a Linux host - either Red Hat or Suse. Plus, unless you have the new Virtualizing chips from Intel or AMD, you have to make a special version of the OSen you plan to host with kernel modifications.I don't know if there is a version of FreeBSD for Sen yet or not. You can look. jerry On 2/5/07, Daniel Marsh [EMAIL PROTECTED] wrote: On 2/6/07, Chris Maness [EMAIL PROTECTED] wrote: Is there an open source equivalent to vmware? -- Bochs, Qemu, and there's another really cool one that I can't think of! :( ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: VMware equivalent?
On Tue, 6 Feb 2007 10:15:47 -0500 Jerry McAllister [EMAIL PROTECTED] wrote: On Mon, Feb 05, 2007 at 04:51:31PM -0800, Kurt Buff wrote: Xen? Xen is an interesting system, but so far as I know, so far, it requires a Linux host - either Red Hat or Suse. I think most Linux distributions have it, and NetBSD (presumably it was prioritized because it's the most portable free OS) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: I'd like to do my bit to support FreeBSD
Thanks, that doesn't look like a challange at all. Guess I'll have some fun with it when I get home. -Jim Stapleton On 2/6/07, Bill Moran [EMAIL PROTECTED] wrote: In response to Jim Stapleton [EMAIL PROTECTED]: I've found quite a few tricks and techniques for handling FreeBSD's ports system when things go south. I'd like to add them to the handbook, adding, lets say 4.5.6 - When Ports Attack. OK, really it'd be more along the lines of 4.5.6 - Installing Ports When Things Go Wrong It would give hints that I've aquired over time from the mailing list, or my own use: 1) config-recursive (my most recent gem aquired from you nice people!) 2) Keeping flag-sets in your make.conf (basically several sets of CFLAGS/CXXFLAGS, so if something fails, you can quickly try something else) 3) How to remove a broken dependancy (read: how to figure the next port up, the list, and then configure that port to remove the dependancy) 4) Rolling back your ports tree to an earlier date or dates, but globally or one port at a time 5) determining which step will fix your problem. Now, as far as I know this would requre: 1) Downloading the doc group of the ports tree to it's own special directory, keeping the CVS flags in tact - I should be able to do this 2) Editing the file of interest - trivial beyond belief 3) ??Generating the file?? Start here: http://www.freebsd.org/doc/en_US.ISO8859-1/books/fdp-primer/index.html As you read through that, you'll probably be pleasantly surprised how well organized and automated everything is. I know I was. 4) ??Submitting the diffs?? Also covered in the above link. Once you've generated your docs (step #3) you can post your modified copy to your personal website and direct people to it to get feedback and suggestions. There's also a dedicated mailing list for the documentation project: http://lists.freebsd.org/mailman/listinfo/freebsd-doc which was very helpful when I was doing my first submits. Thanks for stepping up to help out! -- Bill Moran Collaborative Fusion Inc. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
One hurdle left to switch
I'm chafing at the bit to get rid of Windows at home and move to FreeBSD.
I've even got my wife convinced that she wouldn't have any more problems
with KDE than she presently has with Windows. (Reality is she'd have less!)
There's just one problem. I can use gnucash to do my finances, but what do
I use to do my taxes? Without that, I'm stuck on Windows ('cause I'm damn
sure not going to do my taxes by hand!) I'd be willing to pay for a tax
program that runs on FreeBSD. Is there one?
Paul Schmehl ([EMAIL PROTECTED])
Senior Information Security Analyst
The University of Texas at Dallas
http://www.utdallas.edu/ir/security/
Re: VMware equivalent?
On Tue, 6 Feb 2007 07:45:43 -0800 (PST) Chris Maness [EMAIL PROTECTED] wrote: I have been running vmware, and it works very well, but if I can find a open source version that works well, I would like to move in that direction. Thanks for the tips guys. If you do try qemu try building it with kqemu support. qemu does full emulation (which is needed for running an OS for a different platform). kqemu allows some of the guest OS instructions to run directly on the CPU, which is much faster. kqemu is not as mature as qemu, and if it doesn't works for you, you will find qemu much slower than vmware ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: One hurdle left to switch
On 6 Feb 2007, at 16:04, Paul Schmehl wrote:
I'm chafing at the bit to get rid of Windows at home and move to
FreeBSD. I've even got my wife convinced that she wouldn't have any
more problems with KDE than she presently has with Windows.
(Reality is she'd have less!)
There's just one problem. I can use gnucash to do my finances, but
what do I use to do my taxes? Without that, I'm stuck on Windows
('cause I'm damn sure not going to do my taxes by
hand!) I'd be willing to pay for a tax program that runs on
FreeBSD. Is there one?
i dont do my taxes, or dont know if this american one is of any use,
but:
http://opentaxsolver.sourceforge.net/
its in the ports:
/usr/ports/finance/opentaxsolver/
Eoghan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: HP C-class Blade / Broadcom ethernet / SerDes controllers not supported
Actually tag would be *default release=cvs tag=., see [2] for details. But shouldn't matter if you go the ISO^H^H^Heasy ;) way. [1] ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/200702/ [2] http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvs-tags.html Hi Christoph, Thanks much for the hints/links! Didn't know that there are actually ISOs of the snapshot releases available. This definity makes my life a lot easier... ;-) -ewald ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: One hurdle left to switch
On Tuesday, 6 February, 2007 at 10:04:17 -0600, Paul Schmehl wrote:
I'm chafing at the bit to get rid of Windows at home and move to FreeBSD.
I've even got my wife convinced that she wouldn't have any more problems
with KDE than she presently has with Windows. (Reality is she'd have less!)
There's just one problem. I can use gnucash to do my finances, but what do
I use to do my taxes? Without that, I'm stuck on Windows ('cause I'm damn
sure not going to do my taxes by hand!) I'd be willing to pay for a tax
program that runs on FreeBSD. Is there one?
Have you searched in the ports?
http://www.freebsd.org/ports/categories-grouped.html
For example, what about finance/opentaxsolver which claims to be
US tax prep software?
Cheers,
Nick.
--
Please do not CC me on replies, I read the list and don't need the dupes.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: error compiling linux-base-fc4
Gobbledegeek [EMAIL PROTECTED] writes: Hi All build fails with the following error === Generating temporary packing list ** Missing pkg-descr for autoconf-2.13.000227_5. *** Error code 1 The full sequence is copied below: - === linux_base-fc-4_9 depends on file: /usr/local/bin/rpm2cpio - not found ===Verifying install for /usr/local/bin/rpm2cpio in /usr/ports/archivers/rpm === rpm-3.0.6_13 depends on executable in : gmake - found === rpm-3.0.6_13 depends on file: /usr/local/bin/automake14 - not found ===Verifying install for /usr/local/bin/automake14 in /usr/ports/devel/automake14 === automake-1.4.6_2 depends on file: /usr/local/bin/perl5.8.8 - found === automake-1.4.6_2 depends on file: /usr/local/bin/autoconf213 - not found ===Verifying install for /usr/local/bin/autoconf213 in /usr/ports/devel/autoconf213 === Installing for autoconf-2.13.000227_5 === autoconf-2.13.000227_5 depends on executable in : gm4 - found === autoconf-2.13.000227_5 depends on file: /usr/local/bin/perl5.8.8 - found === Generating temporary packing list ** Missing pkg-descr for autoconf-2.13.000227_5. *** Error code 1 Stop in /usr/ports/devel/autoconf213. *** Error code 1 Stop in /usr/ports/devel/automake14. *** Error code 1 Stop in /usr/ports/archivers/rpm. *** Error code 1 Stop in /usr/ports/emulators/linux_base-fc4. - Thanks for your help Looks like the port skeleton is corrupt. Is the pkg-descr file there at all? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ImageMagick and Gallery2
Joacim Melin [EMAIL PROTECTED] writes: I tried to install ImageMagick from the ports-distribution for FreeBSD 6.0 on a sparc32-box but I'm unsure if I did something wrong or if the ports package is messed up since there are no binaries installed for ImageMagick? How do you know there are no binaries? Does ImageMagick show up in the output of pkg_info(1)? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: One hurdle left to switch
I'm chafing at the bit to get rid of Windows at home and move to FreeBSD.
I've even got my wife convinced that she wouldn't have any more problems with
KDE than she presently has with Windows. (Reality is she'd have less!)
There's just one problem. I can use gnucash to do my finances, but what do I
use to do my taxes? Without that, I'm stuck on Windows ('cause I'm damn sure
not going to do my taxes by hand!) I'd be willing to pay for a tax program
that runs on FreeBSD. Is there one?
I haven't looked as my life is complicated enough that I get them done for
me, but I could have sworn HR Block and TurboTax and all those guys had
completely web based solutions these days, no?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Unable to locate Net-SMTP-SSL-1.01 perl module in ports
Hi Gerard! On Mon, 05 Feb 2007, Gerard Seibert wrote: I am looking for the Net-SMTP-SSL perl module in the ports system. So far I have not been able to locate it.. If I cannot locate it, I will have to use CPAN to install it; which is something I would rather not do. Does anyone know if it exists under a different name perhaps? Is this what you were looking for? ttyp1 [EMAIL PROTECTED]:/usr/ports 0 09:30:21 545 # make search name=p5-net-smtp ... Port: p5-Net-SMTP-TLS-0.12 Path: /usr/ports/mail/p5-Net-SMTP-TLS Info: An SMTP client supporting TLS and AUTH Maint: [EMAIL PROTECTED] B-deps: p5-Digest-HMAC-1.01 p5-Digest-SHA1-2.11 p5-IO-Socket-SSL-1.02 p5-MIME-Base64-3.07 p5-Net-SSLeay-1.30_1 perl-5.8.8 R-deps: perl-5.8.8 WWW:http://search.cpan.org/dist/Net-SMTP-TLS/ TLS = SSLv3, IIRC. Justin ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: One hurdle left to switch
Philip Hallstrom wrote:
I'm chafing at the bit to get rid of Windows at home and move to
FreeBSD. I've even got my wife convinced that she wouldn't have any
more problems with KDE than she presently has with Windows. (Reality
is she'd have less!)
There's just one problem. I can use gnucash to do my finances, but
what do I use to do my taxes? Without that, I'm stuck on Windows
('cause I'm damn sure not going to do my taxes by hand!) I'd be
willing to pay for a tax program that runs on FreeBSD. Is there one?
I haven't looked as my life is complicated enough that I get them done
for me, but I could have sworn HR Block and TurboTax and all those guys
had completely web based solutions these days, no?
http://www.irshome.com/index.php?tpid=10303ttid=112st=Tax%20Refunds
Now, I guess the real question; who's used 'em?
KDK
--
Love is a slippery eel that bites like hell.
-- Matt Groening
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Unable to locate Net-SMTP-SSL-1.01 perl module in ports
On Tuesday February 06, 2007 at 12:32:50 (PM) Justin Meyer wrote: Is this what you were looking for? ttyp1 [EMAIL PROTECTED]:/usr/ports 0 09:30:21 545 # make search name=p5-net-smtp .. Port: p5-Net-SMTP-TLS-0.12 Path: /usr/ports/mail/p5-Net-SMTP-TLS Info: An SMTP client supporting TLS and AUTH Maint: [EMAIL PROTECTED] B-deps: p5-Digest-HMAC-1.01 p5-Digest-SHA1-2.11 p5-IO-Socket-SSL-1.02 p5-MIME-Base64-3.07 p5-Net-SSLeay-1.30_1 perl-5.8.8 R-deps: perl-5.8.8 WWW:http://search.cpan.org/dist/Net-SMTP-TLS/ TLS = SSLv3, IIRC. No, it is not the module I am looking for. There is a Net::SMTP::SSL perl module available from CPAN. I guess that nobody has ever ported it to FBSD. If I knew how, I would; however that isn't going to happen anytime in the near future. I will just use CPAN to install it. -- Gerard ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
recovery after power outage
My fbsd 6.0 box is having filesystem problems on boot since a blackout yesterday. Here's a synopsis: /dev/ad0s1a: clean /dev/ad0s1d: DEFER FOR BACKGROUND CHECKING ...repeats for ad0s1f e then reports error=40UNCORRECTABLE for ad1 (twice) and reports an unexpected inconsistency for my ad1s1c device which is the primary slave hd. Tells me to run fsck manually and asks which shell I want. Maybe this is my fault for not partitioning appropriately, can't get to many commands including fsck guess it's because of the fs problems. How can I try and recover from this? Marty -- Web Installed Formmail - http://face2interface.com/formINSTal/ Webmaster's BBS - http://bbs.face2interface.com/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: recovery after power outage
In response to Marty Landman [EMAIL PROTECTED]: My fbsd 6.0 box is having filesystem problems on boot since a blackout yesterday. Here's a synopsis: /dev/ad0s1a: clean /dev/ad0s1d: DEFER FOR BACKGROUND CHECKING ...repeats for ad0s1f e then reports error=40UNCORRECTABLE for ad1 (twice) and reports an unexpected inconsistency for my ad1s1c device which is the primary slave hd. Tells me to run fsck manually and asks which shell I want. Maybe this is my fault for not partitioning appropriately, can't get to many commands including fsck guess it's because of the fs problems. How can I try and recover from this? If you can't mount the filesystem that has fsck on it, you're going to have to boot off a CD (FreeSBIE or the FreeBSD fixit cd) and run fsck from there. -- Bill Moran Collaborative Fusion Inc. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: One hurdle left to switch
On Tue, 6 Feb 2007, Kevin Kinsey wrote:
Philip Hallstrom wrote:
I'm chafing at the bit to get rid of Windows at home and move to FreeBSD.
I've even got my wife convinced that she wouldn't have any more problems
with KDE than she presently has with Windows. (Reality is she'd have
less!)
There's just one problem. I can use gnucash to do my finances, but what
do I use to do my taxes? Without that, I'm stuck on Windows ('cause I'm
damn sure not going to do my taxes by hand!) I'd be willing to pay for a
tax program that runs on FreeBSD. Is there one?
I haven't looked as my life is complicated enough that I get them done for
me, but I could have sworn HR Block and TurboTax and all those guys had
completely web based solutions these days, no?
http://www.irshome.com/index.php?tpid=10303ttid=112st=Tax%20Refunds
Now, I guess the real question; who's used 'em?
KDK
--
Love is a slippery eel that bites like hell.
-- Matt Groening
Many software tax solutions go out of date too, really quickly (buy a software
solution and it tends to only last a year). Better doing stuff online and then
checking the option to have a CPA check over your data.
-Garrett
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Portupgrade out of swap - corrupt pkg info...
I updated the ports on my laptop last night ran: portsnap fetch update followed by: portupgrade -arR This ran normally until it hit vim-gtk2. It built fine but whilst it was registering the installation became unresponsive. Hard rebooted, and found that in /var/log/messages it referred to being out of swap (I don't have the exact message to hand). pkg_info did not show vim as installed, so when portupgrade finished a cd'd to /usr/ports/editors/vim and ran make install clean. This installed without error. However, now when I run pkg_info it reports that the pkg info for vim-gtk2 is corrupt. Could anyone help with 2 questions: ~ How do I fix the package database entry for vim? ~ What might have caused my machine to run out of swap? It was running X and twm with 1 xterm open. For hardware it has 256MB RAM and a 470MB swap partition. I've not had this problem before. This is on 6-STABLE from about 2 weeks ago. Apologies for any iffy formatting - this is being sent from my office account via MS Outlook. TIA Peter Harrison ** This document is strictly confidential and is intended only for use by the addressee. If you are not the intended recipient, any disclosure, copying, distribution or other action taken in reliance of the information contained in this e-mail is strictly prohibited. Any views expressed by the sender of this message are not necessarily those of the Department for Work and Pensions. If you have received this transmission in error, please use the reply function to tell us and then permanently delete what you have received. Please note: Incoming and outgoing e-mail messages are routinely monitored for compliance with our policy on the use of electronic communications. ** The original of this email was scanned for viruses by Government Secure Intranet (GSi) virus scanning service supplied exclusively by Cable Wireless in partnership with MessageLabs. On leaving the GSI this email was certified virus free. The MessageLabs Anti Virus Service is the first managed service to achieve the CSIA Claims Tested Mark (CCTM Certificate Number 2006/04/0007), the UK Government quality mark initiative for information security products and services. For more information about this please visit www.cctmark.gov.uk ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: One hurdle left to switch
On Tue, 6 Feb 2007 [EMAIL PROTECTED] wrote:
On Tue, 6 Feb 2007, Kevin Kinsey wrote:
Philip Hallstrom wrote:
I'm chafing at the bit to get rid of Windows at home and move to
FreeBSD. I've even got my wife convinced that she wouldn't have any more
problems with KDE than she presently has with Windows. (Reality is
she'd have less!)
There's just one problem. I can use gnucash to do my finances, but what
do I use to do my taxes? Without that, I'm stuck on Windows ('cause I'm
damn sure not going to do my taxes by hand!) I'd be willing to pay for
a tax program that runs on FreeBSD. Is there one?
I haven't looked as my life is complicated enough that I get them done for
me, but I could have sworn HR Block and TurboTax and all those guys had
completely web based solutions these days, no?
http://www.irshome.com/index.php?tpid=10303ttid=112st=Tax%20Refunds
Now, I guess the real question; who's used 'em?
KDK
--
Love is a slippery eel that bites like hell.
-- Matt Groening
Many software tax solutions go out of date too, really quickly (buy a software
solution and it tends to only last a year). Better doing stuff online and then
checking the option to have a CPA check over your data.
-Garrett
Oh, another thing. I've used HR Block's online tax accounting service, and
although it's not the best interface, it's just as good as some copies of Turbotax
that I've seen.
-Garrett
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: VMware equivalent?
RW wrote: On Tue, 6 Feb 2007 07:45:43 -0800 (PST) Chris Maness [EMAIL PROTECTED] wrote: I have been running vmware, and it works very well, but if I can find a open source version that works well, I would like to move in that direction. Thanks for the tips guys. If you do try qemu try building it with kqemu support. qemu does full emulation (which is needed for running an OS for a different platform). kqemu allows some of the guest OS instructions to run directly on the CPU, which is much faster. kqemu is not as mature as qemu, and if it doesn't works for you, you will find qemu much slower than vmware ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] I would try VMWare 3 myself (ports tree) however, I'm unclear how to obtain a working key. Any ideas? -- Best regards, Chris Laugh and the world laughs with you. cry and ... you have to blow your nose. smime.p7s Description: S/MIME Cryptographic Signature
Re: Question:encryption tool.
On 2/6/07, David Robillard [EMAIL PROTECTED] wrote: Thanks a lot, Our current backup system is veritas netbackup, and changing that to entire bacula is best thing for me, May I ask why you would prefer Bacula over NetBackup? I'm just curious, because having worked with both, I personally prefer NetBackup. so they wanted me encrypt these files, that is on the backup location before the netbackup scheduler picks up these files. Database is getting backed up to a disk location and from there netbackup agent picks up and writes it into the tape , but we have these 13 flat files that go into offsite which really needs encryption and decryption logic in place upon after restore back to disk . If those databases are all Oracle instances, then you might want to take a look at Oracle Secure Backup. It does exactly what you need. More info here: http://www.oracle.com/technology/products/secure-backup/index.html Cheers, Thanks a lot , but we are on Oracle9i database, the Oracle secure backup they are talking would be nice on 10G onwards ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Portupgrade out of swap - corrupt pkg info... (fwd)
-- Forwarded message -- Date: Tue, 6 Feb 2007 09:53:30 -0800 (PST) From: [EMAIL PROTECTED] To: Harrison Peter CSA BIRKENHEAD [EMAIL PROTECTED] Subject: Re: Portupgrade out of swap - corrupt pkg info... On Tue, 6 Feb 2007, Harrison Peter CSA BIRKENHEAD wrote: I updated the ports on my laptop last night ran: portsnap fetch update followed by: portupgrade -arR This ran normally until it hit vim-gtk2. It built fine but whilst it was registering the installation became unresponsive. Hard rebooted, and found that in /var/log/messages it referred to being out of swap (I don't have the exact message to hand). pkg_info did not show vim as installed, so when portupgrade finished a cd'd to /usr/ports/editors/vim and ran make install clean. This installed without error. If you ran make install clean then it should have installed the pkg info. However, now when I run pkg_info it reports that the pkg info for vim-gtk2 is corrupt. Hmmm... Could anyone help with 2 questions: ~ How do I fix the package database entry for vim? pkg_install should do the trick, but you already cleaned out the package build directory . make install for vim-gtk2 should do the trick now. ~ What might have caused my machine to run out of swap? It was running X and twm with 1 xterm open. For hardware it has 256MB RAM and a 470MB swap partition. I've not had this problem before. Ouch.. you should actually have more swap than that (2*(Physical RAM amount) = 512MB swap would be a better idea in the future). As for running out of swap, what are your make options for ruby? Having the ruby doc (or whatever it was) option selected ate up a lot of memory on machines a few months back; having this option deselected and rebuilding ruby fixes the memory bloat. make config in the lang/ruby* ports directory will yield the desired result here. -Garrett ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: recovery after power outage
On Tue, Feb 06, 2007 at 11:54:17AM -0500, Marty Landman wrote: My fbsd 6.0 box is having filesystem problems on boot since a blackout yesterday. Here's a synopsis: /dev/ad0s1a: clean /dev/ad0s1d: DEFER FOR BACKGROUND CHECKING ...repeats for ad0s1f e then reports error=40UNCORRECTABLE for ad1 (twice) and reports an unexpected inconsistency for my ad1s1c device which is the primary slave hd. Tells me to run fsck manually and asks which shell I want. Maybe this is my fault for not partitioning appropriately, can't get to many commands including fsck guess it's because of the fs problems. How can I try and recover from this? Well, do as it says - choose a shell and run fsck manually. Probably you want the default shell = /bin/sh. The output says ad0s1a is clean, so your fsck should be available. Just run /sbin/fsck /dev/ad1s1c. Actually that would be a somewhat unusual address - what they call a 'dangerously dedicated' disk. But I think fsck should be able to work through it. You will probably have to sit there and answer 'y' to a bunch of prompts or do fsck -y /dev/ad1s1c to force a y to everything. The fsck that runs at boot pops out and stops the boot if it runs in to anything it is scared to assume it will fix. But in most cases, there isn't anything you can do but answer 'y' anyway. If that causes something to be lost, you probably wouldn't be able to recover it anyway. When the manual fsck-s all finish - which can take a long time, then reboot and see what happens. It should come all the way up. It the manual fscks don't work, then you may have to try some extreme tactics to recover things on that partition or abandon it. If you end up rebuilding the drive, then the next time make a FreeBSD slice and then make a partition within that slice to avoid that 'dangerously dedicated' config. Good luck, jerry Marty -- Web Installed Formmail - http://face2interface.com/formINSTal/ Webmaster's BBS - http://bbs.face2interface.com/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error upgrading Azureus
On Tue, 06 Feb 2007 06:59:25 -0800 Garrett Cooper [EMAIL PROTECTED] wrote: From pkg_tree: azureus-2.5.0.0_2 Latest version in ports is Azureus 2.5.0.4. I just did a portupgrade yesterday including Azureus without problems. Andreas -- GnuPG key : 0x2A573565 | http://cyb.websimplex.de/pubkey.asc Fingerprint: 925D 2089 0BF9 8DE5 9166 33BB F0FD CD37 2A57 3565 pgp19apjJFvev.pgp Description: PGP signature
Re: Question:encryption tool.
On 2/6/07, Dak Ghatikachalam [EMAIL PROTECTED] wrote: [...snip!...] Thanks a lot , but we are on Oracle9i database, the Oracle secure backup they are talking would be nice on 10G onwards Well, not according to the FAQ. Here is what it says: -- What Oracle database versions does Oracle Secure Backup support? Oracle Secure Backup installs with a native integration of Oracle Database's via Oracle Recovery Manager (RMAN), which supports Oracle9i forward. So if you're running 9i, you should be alrgiht. You can get your hands on the FAQ at http://www.oracle.com/technology/products/secure-backup/pdf/FAQ.pdf HTH, David -- David Robillard UNIX systems administrator Oracle DBA CISSP, RHCE Sun Certified Security Administrator Montreal: +1 514 966 0122 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: port install vim no gettext feature
peter [EMAIL PROTECTED] writes: Hi, I install vim from port /usr/ports/editors/vim, In gvim, use :version command: Big version with GTK GUI. Features included (+) or not (-): +arabic +autocmd +balloon_eval +browse ++builtin_terms +byte_offset +cindent +clientserver +clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +cryptv +cscope +cursorshape +dialog_con_gui +diff +digraphs +dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +folding -footer +fork() -gettext -hangul_input +iconv +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap +menu +mksession +modify_fname +mouse +mouseshape +mouse_dec -mouse_gpm -mouse_jsbterm +mouse_netterm +mouse_xterm +multi_byte +multi_lang -mzscheme +netbeans_intg -osfiletype +path_extra -perl +postscript +printer -profile -python +quickfix +reltime +rightleft -ruby +scrollbind +signs +smartindent -sniff +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white -tcl +terminfo +termresponse +textobjects +title +toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup +X11 +xfontset +xim +xsmp_interact +xterm_clipboard -xterm_save How to modify Makefile to enable gettext? It appears to be enabled if and only if you define WITH_LANG. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
plextor PX-760SA problem
Hello! I'm having some trouble trying to burn dvd:s using my PX-760SA under FreeBSD. As far as I know, the DVD-burning software that is available for FBSD uses the SCSI subsystem and therefore requires atapicam. My problem is the following: After Compiling the kernel with the following options device atapicam device ata device scbus device cd device pass The system almost hangs at startup. With almost I mean that when it tries to recognize the cd0 device it hangs for about 5-10 minutes and then produces the output: cd0 at ata2 bus 0 target 1 lun 0 cd0: PLEXTOR DVDR PX-760A 1.03 Removable CD-ROM SCSI-0 device cd0: 3.300MB/s transfers cd0: @ after that it hangs again. I've also tried loading the atapicam module with kldload which generates almost the same behavior. After kldload I can use the system until I try kldstat or ls /dev then it hangs for about 5-10 minutes. produces the output cd0 at ata2 bus 0 target 1 lun 0 cd0: PLEXTOR DVDR PX-760A 1.03 Removable CD-ROM SCSI-0 device cd0: 3.300MB/s transfers cd0: @ and then hangs again for another couple of minutes, responds to my commands for a couple of minutes and hangs again and so on. I tried upgrading the firmware of the PK-760SA to 1.06. Still the same problem There is no problem using the PX-760SA without atapicam. dmesg attached. (without atapicam in kernel) Any help appreciated //Stefan dmesg Description: Binary data ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error upgrading Azureus
On Tue, 6 Feb 2007, Andreas Rudisch wrote: On Tue, 06 Feb 2007 06:59:25 -0800 Garrett Cooper [EMAIL PROTECTED] wrote: From pkg_tree: azureus-2.5.0.0_2 Latest version in ports is Azureus 2.5.0.4. I just did a portupgrade yesterday including Azureus without problems. Andreas -- GnuPG key : 0x2A573565 | http://cyb.websimplex.de/pubkey.asc Fingerprint: 925D 2089 0BF9 8DE5 9166 33BB F0FD CD37 2A57 3565 Hmmm... I'll have to double check on the version. Weird. -Garrett ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Question:encryption tool
On 2/5/07, Mike Tancsa [EMAIL PROTECTED] wrote: On Mon, 5 Feb 2007 18:21:18 -0500, in sentex.lists.freebsd.questions you wrote: Thanks a lot, Our current backup system is veritas netbackup, and changing that to entire bacula is best thing for me, But the making the decision about switching to bacula was above my pay grade. I hardly see that happen anytime soon. so they wanted me encrypt these files, that is on the backup location before the netbackup scheduler picks up these files. If you just want to encrypt the files with a password, openssl works well and can be found pretty well on any platform. [cage]% echo this is a test | openssl enc -aes-128-cbc -base64 -k pass U2FsdGVkX1+gkWRJo5W7PGBLpilZmlEx3+cKML+32to= [cage]% [cage]% [cage]% echo U2FsdGVkX1+gkWRJo5W7PGBLpilZmlEx3+cKML+32to= | openssl aes-128-cbc -d -base64 -k pass this is a test [cage]% But you really want to take a look at /usr/ports/security/gnupg. It seems all a bit confusing at first, but its a much better way to encrypt data and manage who has access to decode files without having to use a common passphrase. It as well will work across multiple platforms Thanks a lot Mike ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: A VERY Strange Question.
O/H Grant Peel έγραψε: Hi all, SInce the inception of out company in 1998, we have been using FreeBSD exclusively, and will continue to use it and contribute where we can. Due to many client requests, we may be forced into offering a Microsoft Server Solution as well. I would like to discuss the MS setup with someone familiar with bot FreeBSD and Server 2003 for intigration reasons. If people want, we can keep a thread on FreeBSD as others might be able to use some info. Anyoneone willing to discuss on/off list? -Grant I am an IT consultant mainly dealing with M$ software as this is what most of the people want/know in this part of the earth. It is the other way arround here, since I am just starting to offer FreeBSD services (mail server). Tell us what m$ server solutions your clients require. -- RTFM and STFW before anything bad happens - Thanasis Rizoulis Electronic Computing Systems Engineer Larissa, Greece Linux User #358384 FreeBSD/PCBSD user ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Question:encryption tool
On 2/6/07, Robert Huff [EMAIL PROTECTED] wrote: Roland Smith writes: I am looking for any suggestion on using the right tool that I can use to perform the encryption/decryption for flat files. You can encrypt files with AES using ccrypt. http://ccrypt.sourceforge.net/ Both ccrypt and ncrypt are available as ports. Thanks a lot for all the response, I have gone with openssl as posted by Mike T, which was already there in all our environment OS installed and ready to be used. I am going to review these packages again. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: VMware equivalent?
Chris wrote: RW wrote: On Tue, 6 Feb 2007 07:45:43 -0800 (PST) Chris Maness [EMAIL PROTECTED] wrote: I have been running vmware, and it works very well, but if I can find a open source version that works well, I would like to move in that direction. Thanks for the tips guys. If you do try qemu try building it with kqemu support. qemu does full emulation (which is needed for running an OS for a different platform). kqemu allows some of the guest OS instructions to run directly on the CPU, which is much faster. kqemu is not as mature as qemu, and if it doesn't works for you, you will find qemu much slower than vmware ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] I would try VMWare 3 myself (ports tree) however, I'm unclear how to obtain a working key. Any ideas? From the README vmware3 installs After a successful port installation you will need to obtain a license key to run VMware (you can use an old one for Linux). If you want to obtain a new key from http://www.vmware.com , you will have to select Linux as the 'server' platform. regards, Vince ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ***SPAM*** Re: One hurdle left to switch
--On Tuesday, February 06, 2007 09:46:14 -0800 [EMAIL PROTECTED] wrote: Oh, another thing. I've used HR Block's online tax accounting service, and although it's not the best interface, it's just as good as some copies of Turbotax that I've seen. You used it with FreeBSD? What browser? And did it require Flash? Java? Paul Schmehl ([EMAIL PROTECTED]) Senior Information Security Analyst The University of Texas at Dallas http://www.utdallas.edu/ir/security/
Re: One hurdle left to switch
--On Tuesday, February 06, 2007 16:22:34 + N.J. Mann [EMAIL PROTECTED] wrote: Have you searched in the ports? http://www.freebsd.org/ports/categories-grouped.html For example, what about finance/opentaxsolver which claims to be US tax prep software? Strange. I did a make search name=tax, but it didn't find that one. Paul Schmehl ([EMAIL PROTECTED]) Senior Information Security Analyst The University of Texas at Dallas http://www.utdallas.edu/ir/security/
Xorg won't start: f86OpenConsole: KDSETMODE KD_GRAPHICS failed
After I upgraded xorg with pkg_add -r, I got this error when trying to start it on display :1, vt9, alongside my current session: Fatal server error: xf86OpenConsole: KDSETMODE KD_GRAPHICS failed The previous package was linked against libc.so.5, the new is against libc.so.6. The server is mode 6711 and I've tried running it as root, also. It's possible that the libc.so.6 is using newer headers than the kernel, and I've built and installed a new kernel, but am reluctant to restart without knowing that I'll have a usable X server. Can anyone shed any light on the nature of the error message? I'm running: FreeBSD laptop 6.1-STABLE FreeBSD 6.1-STABLE #5: Sat Jul 1 04:01:54 EDT 2006 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: One hurdle left to switch
On Tue, 6 Feb 2007, Paul Schmehl wrote: --On Tuesday, February 06, 2007 09:46:14 -0800 [EMAIL PROTECTED] wrote: Oh, another thing. I've used HR Block's online tax accounting service, and although it's not the best interface, it's just as good as some copies of Turbotax that I've seen. You used it with FreeBSD? What browser? And did it require Flash? Java? Paul Schmehl ([EMAIL PROTECTED]) Senior Information Security Analyst The University of Texas at Dallas http://www.utdallas.edu/ir/security/ HR Block uses strictly Javascript (not sure if it's really AJAX quality, but it might be), so if you have a recent mozilla based browser stuff should work out of the box. Don't try to load the page with lynx or links though :D. -Garrett ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD Port: R-2.4.1
Hey Eric, all, That was the first install attempt of R on this box. There was no previous installation. Also, I tried again with portinstall -Rf R, which, I believe, reinstalled all the dependencies, but with the same outcome. For the line that failed I also went into the directory: /usr/ports/math/R/work/R-2.4.1/src/main and changed the original command which was cc -std=gnu99 -export-dynamic -L/usr/local/lib -o R.bin Rmain.o -L../../lib -lR to gcc42 -std=gnu99 -export-dynamic -L/usr/local/lib -o R.bin Rmain.o -L../../lib -lR -lgcc_s and the command worked (note I changed cc to gcc42 and added -lgcc_s) Any other ideas? Joey On 2/5/07, Eric van Gyzen [EMAIL PROTECTED] wrote: Joey, Try removing any existing R installation before building 2.4.1. Also, reinstall all of R's dependencies -- blas and its dependents are now built with gfortran 4.2.0. Eric Joey Mingrone wrote: Hi: I'm trying to install the R port, but get linking errors during the installation. I've included the text below. Here's what my uname -a says: FreeBSD karlsruhe.mingrone.org 6.1-RELEASE-p11 FreeBSD 6.1-RELEASE-p11 #0: Wed Dec 20 08:25:54 AST 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/KARLSRUHE_MINGRONE_ORG_2006-12-20 i386 Thanks for any help you can provide and please let me know if there is any other information you need. Joey cc -std=gnu99 -I. -I../../src/include -I../../src/include -I/usr/local/include -DHAVE_CONFIG_H -D__NO_MATH_INLINES -fpic -O2 -fno-strict-aliasing -pipe -c util.c -o util.o cc -std=gnu99 -I. -I../../src/include -I../../src/include -I/usr/local/include -DHAVE_CONFIG_H -D__NO_MATH_INLINES -fpic -O2 -fno-strict-aliasing -pipe -c version.c -o version.o cc -std=gnu99 -I. -I../../src/include -I../../src/include -I/usr/local/include -DHAVE_CONFIG_H -D__NO_MATH_INLINES -fpic -O2 -fno-strict-aliasing -pipe -c vfonts.c -o vfonts.o gfortran42 -D__NO_MATH_INLINES -fpic -g -O2 -c xxxpr.f -o xxxpr.o cc -std=gnu99 -shared -L/usr/local/lib -o libR.so CConverters.o CommandLineArgs.o Rdynload.o Renviron.o RNG.o apply.o arithmetic.o apse.o array.o attrib.o base.o bind.o builtin.o character.o coerce.o colors.o complex.o connections.o context.o cov.o cum.o dcf.o datetime.o debug.o deparse.o deriv.o dotcode.o dounzip.o dstruct.o duplicate.o engine.o envir.o errors.o eval.o format.o fourier.o gevents.o gram.o gram-ex.o graphics.o identical.o internet.o iosupport.o lapack.o list.o localecharset.o logic.o main.o mapply.o match.o memory.o model.o names.o objects.o optim.o optimize.o options.o par.o paste.o pcre.o platform.o plot.o plot3d.o plotmath.o print.o printarray.o printvector.o printutils.o qsort.o random.o regex.o registration.o relop.o rlocale.o saveload.o scan.o seq.o serialize.o size.o sort.o source.o split.o sprintf.o startup.o subassign.o subscript.o subset.o summary.o sysutils.o unique.o util.o version.o vfonts.o xxxpr.o `ls ../appl/*.o ../nmath/*.o ../unix/*.o 2/dev/null|grep -v /ext-` -lblas -L/usr/local/lib/gcc-4.2.0/gcc/i386-portbld-freebsd6.1/4.2.0 -L/usr/local/lib/gcc-4.2.0 -lgfortran -lm -lgcc_s /usr/local/lib/libintl.so /usr/local/lib/libiconv.so -Wl,-rpath -Wl,/usr/local/lib -lreadline -lpcre -lbz2 -lz -lm -liconv mkdir /usr/ports/math/R/work/R-2.4.1/bin/exec mkdir /usr/ports/math/R/work/R-2.4.1/lib cc -std=gnu99 -I. -I../../src/include -I../../src/include -I/usr/local/include -DHAVE_CONFIG_H -D__NO_MATH_INLINES -fpic -O2 -fno-strict-aliasing -pipe -c Rmain.c -o Rmain.o cc -std=gnu99 -export-dynamic -L/usr/local/lib -o R.bin Rmain.o -L../../lib -lR /usr/local/lib/gcc-4.2.0/libgfortran.so.2: undefined reference to [EMAIL PROTECTED]' /usr/local/lib/gcc-4.2.0/libgfortran.so.2: undefined reference to [EMAIL PROTECTED]' /usr/local/lib/gcc-4.2.0/libgfortran.so.2: undefined reference to [EMAIL PROTECTED]' /usr/local/lib/gcc-4.2.0/libgfortran.so.2: undefined reference to [EMAIL PROTECTED]' /usr/local/lib/gcc-4.2.0/libgfortran.so.2: undefined reference to [EMAIL PROTECTED]' /usr/local/lib/gcc-4.2.0/libgfortran.so.2: undefined reference to [EMAIL PROTECTED]' *** Error code 1 Stop in /usr/ports/math/R/work/R-2.4.1/src/main. *** Error code 1 Stop in /usr/ports/math/R/work/R-2.4.1/src/main. *** Error code 1 Stop in /usr/ports/math/R/work/R-2.4.1/src. *** Error code 1 Stop in /usr/ports/math/R/work/R-2.4.1. *** Error code 1 Stop in /usr/ports/math/R. ** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portinstall.44120.0 env make ** Fix the problem and try again. ** Listing the failed packages (*:skipped / !:failed) ! math/R(linker error) --- Packages processed: 0 done, 0 ignored, 0 skipped and 1 failed ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
SCP Delete
How do I delete a file after I've copied it with SCP? Is there some sort of secure 'rm' command? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: SCP Delete
On Tue, 6 Feb 2007, Don O'Neil wrote: How do I delete a file after I've copied it with SCP? Is there some sort of secure 'rm' command? ssh allows you to execute many commands, one being rm. Example: ssh [EMAIL PROTECTED] rm /full/path/to/file; There's also gftp which can use ssh / sftp if you like GUI. -Garrett ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: SCP Delete
How do I delete a file after I've copied it with SCP? Is there some sort of secure 'rm' command? ssh [EMAIL PROTECTED] 'rm /full/path/to/file' Should work. There's no srm (secure rm), you simply ssh to the machine and give it the command to execute. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: SCP Delete
On Feb 6, 2007, at 3:12 PM, Don O'Neil wrote: How do I delete a file after I've copied it with SCP? Is there some sort of secure 'rm' command? Use rsync --delete via SSH. (Danger! Slippery when wet! Use with caution.) -- -Chuck ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD Port: R-2.4.1
On Tue, 6 Feb 2007, Joey Mingrone wrote: and the command worked (note I changed cc to gcc42 and added -lgcc_s) You're going to run into issues if you use gcc-4.2 (an alpha gcc compiler), because many things were broken compilation wise moving from gcc-3.4 (base compiler that FreeBSD runs) to gcc-4.x. Why not ask the hackers@ list about this question since it's a more technical one than most on the questions@ list ask/answer? -Garrett PS It looks like some libs are statically defined somewhere, so you need to fix that before moving on. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Problems with perl script on 6.1/5.8.8
I've got a perl script that just refuses to run on my new 6.1 box with Perl
5.8.8... Whenever I run it from the command line I get this:
Can't modify single ref constructor in lock at ./caldisp.pl line 84, near
*LOCKF)
Execution of ./caldisp.pl aborted due to compilation errors.
The lines in question are:
if (open (LOCKF, $LOCKF))
{
lock (\*LOCKF);
}
Now the script work fine on my older 4.10 box with perl 5.6.1.
Anyone have any ideas on how to fix this?
Thanks!!!
P.S. Thanks for the 'doh!' from everyone on the 'rm' with scp... I didn't
even think of just using ssh!
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Problems with perl script on 6.1/5.8.8
Can't modify single ref constructor in lock at ./caldisp.pl line 84, near
*LOCKF)
Execution of ./caldisp.pl aborted due to compilation errors.
I'm not sure what has changed in Perl 5.8, but this should work instead:
if(open my $fh, $LOCKF) {
lock($fh);
}
Josh
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
rc.conf ...need help
Hello,
I was tweaking the /etc/rc.conf file and apparently had a typo. Now
the system boots into single user mode. I know what my error is
syslogd_enable=YES {left off the first }
How can I edit rc.conf while in single user mode. I've tried vi ee,
but system doesn't recognize either.
Thanks
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Error upgrading Azureus
On Wednesday 07 February 2007 00:59, Garrett Cooper wrote: Robert Huff wrote: Warren Liddell writes: Running FreeBSD 6.2-STABLE BUILD FAILED Worked for me - running -CURRENT - within the last week. Robert Huff From pkg_tree: azureus-2.5.0.0_2 |\__ libdrm-2.0.2 |\__ pkg-config-0.21 |\__ xorg-fonts-encodings-6.9.0_1 |\__ jpeg-6b_4 |\__ expat-2.0.0_1 |\__ libiconv-1.9.2_2 |\__ png-1.2.14 |\__ freetype2-2.2.1_1 |\__ perl-5.8.8 |\__ fontconfig-2.3.2_6,1 |\__ gettext-0.14.5_2 |\__ libxml2-2.6.27 |\__ xorg-libraries-6.9.0_1 |\__ bitstream-vera-1.10_2 |\__ tiff-3.8.2_1 |\__ javavmwrapper-2.3 |\__ hicolor-icon-theme-0.9_2 |\__ glib-2.12.9 |\__ shared-mime-info-0.19 |\__ atk-1.12.4 |\__ cairo-1.2.6_1 |\__ xorg-fonts-truetype-6.9.0 |\__ libXft-2.1.7_1 |\__ diablo-jdk-1.5.0.07.01_1 |\__ gtk-2.10.9 \__ swt-devel-3.3M4 Based on your error it looks like you don't have swt-devel installed. You should update your ports tree, install swt-devel, and if that works let the maintainer know that it's missing that dependency. -Garrett I had only just run a CVSUP to update my ports tree and src before the portupgrade .. so i'll manually install swt-devel and see how things go form there. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: rc.conf ...need help
On Tuesday 06 February 2007 15:58, Don Munyak wrote:
I was tweaking the /etc/rc.conf file and apparently had a typo. Now
the system boots into single user mode. I know what my error is
syslogd_enable=YES {left off the first }
How can I edit rc.conf while in single user mode. I've tried vi ee,
but system doesn't recognize either.
You can mount /usr (assuming that's not related to whatever you're trying to
fix) by typing mount /usr. You'll also need to mount / read/write before
you can modify rc.conf so I usually just do mount -a. mount / will
re-mount / with the default r/w settings.
If you do have a problem with /usr, there are statically linked versions of
both system default editors in /rescue. So you could also
do /rescue/ee /etc/rc.conf, for example.
JN
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Xorg won't start: f86OpenConsole: KDSETMODE KD_GRAPHICS failed
On Tue, Feb 06, 2007 at 02:38:24PM -0500, Kris Maglione wrote: After I upgraded xorg with pkg_add -r, I got this error when trying to start it on display :1, vt9, alongside my current session: Fatal server error: xf86OpenConsole: KDSETMODE KD_GRAPHICS failed I built it from source, which wasn't as painful as I'd expected, and it works again. Sorry for the noise. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
sendmail setup
List, Guys and Girls, although i know this is not a specific freebsd issue, i will ask the question nevertheless. normally, i sent my outgoing email through my isp ( relay.x.z ). this server seems to be down at the moment. so after working with bsd for years, i decided to dive into sendmail. i read a lot, setup the stuff and tested sh*t. so basically, it seems to work fine: i can send messages between machines on the LAN, but messages to the outside(gmail, other domains) timeout. i ran tcpdump on the external interface, and the only thing that seems to happen is my machine contacting the other machines, but they never reply!: 22:24:25.763774 x.y.z.4091 gsmtp183.google.com.smtp: S 1796563309:1796563309(0) win 57344 mss 1460 (DF) how come? how do i find out? i checked /var/log/security and stuff is not being blocked by ipfw. sendmail reports: stat=Deferred: Operation timed out with gsmtp163.google.com. i have masqueraded(sendmail) with my isp-assigned-domain-name ( ipXXzYYY.provider.country ), and with another domain i own. am i missing something obvious? thanks in advance for any help, regards, usleep ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: sendmail setup
On Feb 6, 2007, at 4:35 PM, [EMAIL PROTECTED] wrote: [ ... ] i ran tcpdump on the external interface, and the only thing that seems to happen is my machine contacting the other machines, but they never reply!: Typically that means your ISP is filtering outbound connections to port 25. If you've got a friendly mailhost handy, try relaying via the RFC-2476 MSP port, 587/tcp, instead of 25/tcp... Otherwise, contact your ISP's tech support and have them fix their broken mail relays. -- -Chuck ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: sendmail setup
On Tuesday 06 February 2007 15:35, [EMAIL PROTECTED] wrote: List, Guys and Girls, although i know this is not a specific freebsd issue, i will ask the question nevertheless. normally, i sent my outgoing email through my isp ( relay.x.z ). this server seems to be down at the moment. so after working with bsd for years, i decided to dive into sendmail. i read a lot, setup the stuff and tested sh*t. so basically, it seems to work fine: i can send messages between machines on the LAN, but messages to the outside(gmail, other domains) timeout. i ran tcpdump on the external interface, and the only thing that seems to happen is my machine contacting the other machines, but they never reply!: 22:24:25.763774 x.y.z.4091 gsmtp183.google.com.smtp: S 1796563309:1796563309(0) win 57344 mss 1460 (DF) how come? how do i find out? i checked /var/log/security and stuff is not being blocked by ipfw. sendmail reports: stat=Deferred: Operation timed out with gsmtp163.google.com. i have masqueraded(sendmail) with my isp-assigned-domain-name ( ipXXzYYY.provider.country ), and with another domain i own. am i missing something obvious? thanks in advance for any help, regards, usleep It's highly possible your ISP is blocking port 25 to everything but their mailservers in an effort to keep their customers from running open relays and other nasty spam software. -- Thanks, Josh Paetzel ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD Port: R-2.4.1
I'm not using gcc-4.2 really. It was just installed because the R port has it as a dependency. Joey On 2/6/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: On Tue, 6 Feb 2007, Joey Mingrone wrote: and the command worked (note I changed cc to gcc42 and added -lgcc_s) You're going to run into issues if you use gcc-4.2 (an alpha gcc compiler), because many things were broken compilation wise moving from gcc-3.4 (base compiler that FreeBSD runs) to gcc-4.x. Why not ask the hackers@ list about this question since it's a more technical one than most on the questions@ list ask/answer? -Garrett PS It looks like some libs are statically defined somewhere, so you need to fix that before moving on. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: sendmail setup
Guys, ( unfortunatly there were no girls ), On 2/6/07, Josh Paetzel [EMAIL PROTECTED] wrote: On Tuesday 06 February 2007 15:35, [EMAIL PROTECTED] wrote: List, Guys and Girls, although i know this is not a specific freebsd issue, i will ask the question nevertheless. normally, i sent my outgoing email through my isp ( relay.x.z ). this server seems to be down at the moment. so after working with bsd for years, i decided to dive into sendmail. i read a lot, setup the stuff and tested sh*t. so basically, it seems to work fine: i can send messages between machines on the LAN, but messages to the outside(gmail, other domains) timeout. i ran tcpdump on the external interface, and the only thing that seems to happen is my machine contacting the other machines, but they never reply!: 22:24:25.763774 x.y.z.4091 gsmtp183.google.com.smtp: S 1796563309:1796563309(0) win 57344 mss 1460 (DF) how come? how do i find out? i checked /var/log/security and stuff is not being blocked by ipfw. sendmail reports: stat=Deferred: Operation timed out with gsmtp163.google.com. i have masqueraded(sendmail) with my isp-assigned-domain-name ( ipXXzYYY.provider.country ), and with another domain i own. am i missing something obvious? thanks in advance for any help, regards, usleep It's highly possible your ISP is blocking port 25 to everything but their mailservers in an effort to keep their customers from running open relays and other nasty spam software. thanks a bunch. it got me thinking. 1. i have an adsl-account with ip-connectivity only ( no mail, no news, no mailserver, no nothing ) 2. i used to send my email using a relay-server coming with a hosted domain i administer ( hosted by an isp abroad ). so that was not working anymore. so i tried sendmail, which did not work either. so i pinged smtp.myisp-withnoservices.country ( which previously never existed ). bingo! now it exists. so they decided to block port 25, and add this relay-server. thanks! regards, usleep ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Special User Account Question
I would like to setup a FreeBSD user account that has specific rights to certain files. This special user should not be able to login or ssh in. Certain other user accounts must first login as them and then use su into the special account (to become that special user) thus gaining access to specific files. This is a situation where a group or group permissions will not help this problem. Any ideas? Thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: rc.conf ...need help
Don Munyak [EMAIL PROTECTED] writes:
I was tweaking the /etc/rc.conf file and apparently had a typo. Now
the system boots into single user mode. I know what my error is
syslogd_enable=YES {left off the first }
How can I edit rc.conf while in single user mode. I've tried vi ee,
but system doesn't recognize either.
I made a mistake in rc.conf, or another startup file, and now I
cannot edit it because the filesystem is read-only. What should I do?
http://www.freebsd.org/doc/en_US.ISO8859-1/books/faq/admin.html#RCCONF-READONLY
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Message (Your message dated Tue, 6 Feb 2007 15:49:06 -0500...)
Your message dated Tue, 6 Feb 2007 15:49:06 -0500 with subject xdonz has been submitted to the moderator of the VAELN list: Jason Guard [EMAIL PROTECTED]. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
toggle between english and french (how?)
I have a 6.2 box on which I intend to set up a web server (lighttpd) and a file server (samba). The kicker is that I will need to allow for French characters (é, à, ç, etc). I had such an issue before but only managed to solve it at the X level (via xorg.conf). Now I need to solve it at the console level. The Handbook has a lot of ideas but it seems focused on a per user basis instead of on a system level basis. Then again, maybe I just don't understand what its trying to say. I would also need to toggle back and forth between English and French. Thanks in advance to any responders, PM ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: rc.conf ...need help
On Tue, Feb 06, 2007 at 03:58:06PM -0500, Don Munyak wrote:
Hello,
I was tweaking the /etc/rc.conf file and apparently had a typo. Now
the system boots into single user mode. I know what my error is
syslogd_enable=YES {left off the first }
How can I edit rc.conf while in single user mode. I've tried vi ee,
but system doesn't recognize either.
It is probably not in your limited path in single user or not
in a mounted partition.
You may have to mount the partition containing 'vi', probably /usr.
While in single user, do:
fsck -p
mount -u /
mount -a
swapon -a
Then you should be able to use vi as:
/usr/bin/vi /etc/rc.conf
using the full path for vi skips over putting it in your path.
Make your fix and reboot.
jerry
Thanks
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: SCP Delete
On 2/6/07, Chuck Swiger [EMAIL PROTECTED] wrote: On Feb 6, 2007, at 3:12 PM, Don O'Neil wrote: How do I delete a file after I've copied it with SCP? Is there some sort of secure 'rm' command? Use rsync --delete via SSH. (Danger! Slippery when wet! Use with caution.) -- -Chuck I am not sure the rsync --delete is what the OP intended. rsync --delete will delete the file on the remote location if it no longer exists in the source location. The OP wanted to, as I understood it, delete the file from the source location after it was copied to the remote location. Probably the best bet would to be to have a script scp the files, do some sort of verification that they made it intact, and then do an ssh [EMAIL PROTECTED]/path/to/file as suggested earlier. HTH, Preston ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: toggle between english and french (how?)
On 2/7/07, Peter [EMAIL PROTECTED] wrote: I have a 6.2 box on which I intend to set up a web server (lighttpd) and a file server (samba). The kicker is that I will need to allow for French characters (é, à, ç, etc). I had such an issue before but only managed to solve it at the X level (via xorg.conf). Now I need to solve it at the console level. The Handbook has a lot of ideas but it seems focused on a per user basis instead of on a system level basis. Then again, maybe I just don't understand what its trying to say. I would also need to toggle back and forth between English and French. Thanks in advance to any responders, Are you sure about the console level? If you plan to access the server via ssh, you only need to set server-side locale right, the rest is handled at the client side. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: toggle between english and french (how?)
On 2/6/07, Peter [EMAIL PROTECTED] wrote: I have a 6.2 box on which I intend to set up a web server (lighttpd) and a file server (samba). The kicker is that I will need to allow for French characters (é, à, ç, etc). I had such an issue before but only managed to solve it at the X level (via xorg.conf). Now I need to solve it at the console level. put a line like this one in your /etc/rc.conf keymap=your_keymap where your_keymap is one of the filenames in /usr/share/syscons/keymaps, without the ending .kbd (e.g. for my swiss french console I use keymap=swissfrench.iso.acc I would also need to toggle back and forth between English and French. man kbdcontrol man kbdmap Thanks in advance to any responders, Hope this helps, PM -- Pietro Cerutti ICQ: 117293691 PGP: 0x9571F78E - ASCII Ribbon Campaign - against HTML e-mail and proprietary attachments www.asciiribbon.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: toggle between english and french (how?)
Le Mardi 6 Février 2007 17:45, Andrew Pantyukhin a écrit : On 2/7/07, Peter [EMAIL PROTECTED] wrote: I have a 6.2 box on which I intend to set up a web server (lighttpd) and a file server (samba). The kicker is that I will need to allow for French characters (é, à, ç, etc). I had such an issue before but only managed to solve it at the X level (via xorg.conf). Now I need to solve it at the console level. The Handbook has a lot of ideas but it seems focused on a per user basis instead of on a system level basis. Then again, maybe I just don't understand what its trying to say. I would also need to toggle back and forth between English and French. Thanks in advance to any responders, Are you sure about the console level? If you plan to access the server via ssh, you only need to set server-side locale right, the rest is handled at the client side. I assume by server-side you mean within samba and lighttpd. Yes, as long as these two can output the characters then I'm happy. I just copied the first paragraph of my posting into lighttpd and this is what came back in my browser: I have a 6.2 box on which I intend to set up a web server (lighttpd) and a file server (samba). The kicker is that I will need to allow for French characters (é,ç, etc). I had such an issue before but only managed to solve it at the X level (via xorg.conf). Now I need to solve it at the console level. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Solved: Negation in tables for packet filter
Erik Norgaard wrote:
I want to create two tables in my packet filter, the first should match
any valid public ip, so I created a table negating anything reserved:
table internet const { !0/8 !10/8 !127/8 !169.254/16 !172.16/12 \
!192.0.2/24 !192.168/16 !198.18/15 !224/4 !240/4 }
Of course, I could do something different here, defining a table for
local networks and negate it. The rest should be caught by the
filtering rules anyway to block non-routable packets.
I have three tables with
different registered hosts with different access levels, I want to
redirect unknown hosts to a page explaining what to do to get registered,
rdr on $wlan_if proto tcp from { $wlan_net !super !users !free } \
to internet port http - 127.0.0.1 port 8000
This one is solved with:
no rdr on $wlan_if proto tcp from { super users free } \
to internet port http
rdr on $wlan_if proto tcp from $wlan_net to !local \
port http - 127.0.0.1 port 8000
However, it would be nice to know if the documentation is incorrect, or
there is a difference in how negation is treated in nat and filter
respectively.
Thanks, Erik
--
Ph: +34.666334818 web: http://www.locolomo.org
smime.p7s
Description: S/MIME Cryptographic Signature
Problem with Serverworks HT1000 serial ATA support - Tyan S3992 Motherboard
Hello I am testing out a new tyan motherboard that uses the next generation of AMD chips and the Serverworks Chipset. It seems that I can reliably crash it with a simple bonnie++ test if I set: /boot/loader.conf - Used for DiskD for Squid kern.ipc.msgtql=2048 I am using FreeBSD 6.1-STABLE amd64. This all works just fine on a non Serverworks Chipset Tyan Board. (literaly I unplug the drive and move it to another system and it works and works in production) If I run: bonnie++ -d /home -u root s1g The system reboots. I have tried this is both S-ATA and P-ATA emulation. Any ideas on why this setting, which works on non Serverworks boards, would make the Serverworks so twitchy? Thanks Nicole atapci0: ServerWorks HT1000 SATA150 controller port 0xb080-0xb087,0xb000-0xb003,0xac00-0xac07 ,0xa880-0xa883,0xa800-0xa81f mem 0xff4fe000-0xff4f irq 11 at device 14.0 on pci1 S-ATA: ad4: 70911MB WDC WD740ADFD-00NLR1 20.07P20 at ata2-master SATA150 OR P-ATA: ad4: DMA limited to UDMA33, device found non-ATA66 cable ad4: 70911MB WDC WD740ADFD-00NLR1 20.07P20 at ata2-master UDMA33 /boot/loader.conf kern.ipc.msgtql=2048 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: toggle between english and french (how?)
On 2/6/07, Peter [EMAIL PROTECTED] wrote: Le Mardi 6 Février 2007 17:45, Andrew Pantyukhin a écrit: On 2/7/07, Peter [EMAIL PROTECTED] wrote: I have a 6.2 box on which I intend to set up a web server (lighttpd) and a file server (samba). The kicker is that I will need to allow for French characters (é, à, ç, etc). I had such an issue before but only managed to solve it at the X level (via xorg.conf). Now I need to solve it at the console level. The Handbook has a lot of ideas but it seems focused on a per user basis instead of on a system level basis. Then again, maybe I just don't understand what its trying to say. I would also need to toggle back and forth between English and French. Thanks in advance to any responders, Are you sure about the console level? If you plan to access the server via ssh, you only need to set server-side locale right, the rest is handled at the client side. I assume by server-side you mean within samba and lighttpd. Yes, as long as these two can output the characters then I'm happy. I just copied the first paragraph of my posting into lighttpd and this is what came back in my browser: I have a 6.2 box on which I intend to set up a web server (lighttpd) and a file server (samba). The kicker is that I will need to allow for French characters (Ã(c),ç, etc). I had such an issue before but only managed to solve it at the X level (via xorg.conf). Now I need to solve it at the console level. I would check to see what charset lighttpd is serving the file as and what charset your browser is using (and then just set everything to utf8) and make sure they are all correct. -- The biggest problem with communication is the illusion that it has occurred. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Special User Account Question
You want /usr/ports/security/sudo :) It can do (the equivalent of) all that and much more. cheers, Gabriel -- Gabriel O'Brien IT Analyst, CBC Technology w: 416-205-8740 m: 416-576-0088 Sean Murphy wrote: I would like to setup a FreeBSD user account that has specific rights to certain files. This special user should not be able to login or ssh in. Certain other user accounts must first login as them and then use su into the special account (to become that special user) thus gaining access to specific files. This is a situation where a group or group permissions will not help this problem. Any ideas? Thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
