Hi All!
I'm trying to use packet writing software on FreeBSD. The FreeBSD
counterpart of the Linux udftools package is the udfclient port.
However, I cannot use it. It does not allow me to create a new
filesystem, telling me that I need to packet-format first. But I don't
know how to do
Looking at the port makefile, one of the programs that is installed is
called cdrw_format. Maybe you should try that.
Roland
Looks like it is the right program. But it does not work. I have
ide-scsi emulation enabled on my CDRW drive, so it is named /dev/cd0. I
have a blank disc in the
Looks like it is the right program. But it does not work. I have
ide-scsi emulation enabled on my CDRW drive, so it is named /dev/cd0. I
have a blank disc in the drive (created with cdrecord speed=4 -v
blank=fast).
Here are the results:
snip
Formatting (please be patient (+/- 10
So how do I achieve per-slice journaling instead of per-partition?
The docs only says this: gjournal only supports UFS2. It does not
specifically say that you cannot have per-slice journaling. However,
since you could have other filesystems on your slice, I bet that slice
based journaling is
Hi,
I need to convert eps files into jpeg files in batch mode. Gimp works
perfectly, except that I cannot use an X display. I tried eps2png with
no success:
%file test.eps
test.eps: DOS EPS Binary File Postscript starts at byte 30 length 566887
TIFF starts at byte 566917 length 4741
I would like to create named instances for an Epson printer. We are
printing invoices on normal A4, photos on glossy photo paper, and draft
papers (with draft quality). E.g. the paper size, margins and print
quality changes from time to time.
I have two problems. First, I do not see any way
The printer is Epson Stylus Photo R265. I'm using gutenprint 5 and CUPS.
The test page prints well from CUPS. I can also print images and web
pages from firefox, because the CUPS/R265 printer can be selected in
the print dialog of firefox.
However, when I open an image from eog (eye of
Hello Laszlo,
You might want to add the following lines to /etc/make.conf
CUPS_OVERWRITE_BASE=yes
NO_LPR=yes
WITH_CUPS=yes
And rebuild the application you want to print from.
(The above was found on the excellent guide at
http://www.math.colostate.edu/~reinholz/freebsd/)
Thank you! I
The base page for CUPS has a button labeled Add Printer.
On *my* setup, anyway.
On mine too.
What it really does is add a queue, so you can do it any number of times
for the same physical printer.
I did not know that! But it is not clear in the docs. CUPS talks about
printers and
Apparently, the truss trace tool has a bug. At least I was told that
the tracer program should not change the return value of the getppid()
call inside the traced process. Here is an example program:
%cat test.c
#include stdio.h
int main() {
while(1) {
sleep(5);
printf(ppid =
It looks like the ptrace() syscall is the problem:
DESCRIPTION
The ptrace() system call provides tracing and debugging
facilities. It allows one process (the tracing process) to
control another (the traced process). The tracing process must
first attach to the traced
#uptime
9:06AM up 6:14, 12 users, load averages: 25.39, 13.19, 9.55
I would think that CPU is under 100% when load=15.58 . But it is not:
#top -S
last pid: 17095; load averages: 13.26, 11.20,
8.57
up
I have 4 virtual machines. They have exactly the same settings, except
port numbers. Only one is doing this. Writes messages to syslog like:
Feb 27 11:06:32 vm04 transmission-daemon: Couldn't create socket:
Protocol not supported (fdlimit.c:642)
Feb 27 11:09:20 vm04 transmission-daemon:
Hi All,
I have a Python program that goes up to 100% CPU. Just like this (top):
PID USERNAME THR PRI NICE SIZERES STATE C TIME WCPU
COMMAND
80212 user1 2 440 70520K 16212K select 1 0:30 100.00%
/usr/local/bin/python process_updates_ss_od.py -l 10
I
Hi,
I have an old backup from a MySQL data directory. It was created with
MySQL version 3. If I install MySQL 4 then I get this message telling
that the table was created with a different MySQL version.
So I try to install mysql 3. Here is the problem:
gw# pwd
On 2011-03-26 18:41, John Levine wrote:
In article4d8e1e4a.5000...@shopzeus.com you write:
Hi,
I have an old backup from a MySQL data directory. It was created with
MySQL version 3. If I install MySQL 4 then I get this message telling
that the table was created with a different MySQL version.
There is nothing in /var/log/messages.
It was working with 4.1 server, but I just uninstalled that (because
the upgrading faq told me to install 4.0 instead.)
Do you have the following in your /etc/rc.conf file:
mysql_enable=YES
Yes. I'm in the process of installing FreeBSD 6.4 in a
Sounds like you'll have to do some debugging. Try adding --verbose to
mysql_args in /etc/rc.conf, and see the other advice in
http://dev.mysql.com/doc/refman/4.1/en/starting-server.html
gw# /usr/local/bin/mysqld_safe --verbose
Starting mysqld daemon with databases from /var/db/mysql
I could install FreeBSD 6.4 on a virtual machine, replace the data dir
and run mysqldump from there.
Thank you for your help!
L
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
___
Hello,
I read the manual and I can mount my VFAT32 partition with this command:
mount_msdosfs -u nobody -g shares -m 777 -M 777 /dev/ad0s5 /mnt/transfer
This will make files and directories writeable by users in the shares
group.
But how do I specify the same in /etc/fstab?
This won't
Lowell Gilbert wrote:
Laszlo Nagy [EMAIL PROTECTED] writes:
/dev/ad0s5 /mnt/transfer msdosfs rw -u nobody -g shares -m 777
-M 7770 0
Try:
/dev/ad0s5 /mnt/transfer msdosfs rw,-unobody,-gshares,-m777 0
0
Whew, that worked
I would like to copy all user accounts, including root from an already
installed 8.0 system to a fresh new 8.1 system.
My plan is to boot into single user mode, then copy these:
/etc/passwd
/etc/master.passwd
/etc/group
then run pwd_mkdb and finally restart the system. (Obviously, I also
System is FreeBSD shopzeus.com 8.1-STABLE FreeBSD 8.1-STABLE #0: Sun Oct
31 02:55:28 EDT 2010 amd64
It has two quad-core Xeon CPUs, 24GB memory, and a RAID 1+0 array with
10 disks + Areca 1680 controller with 2GB write back cache.
Server is running: mailscanner + apache multihost + PHP +
Step 1, get them to define server and too slow:
If you log in and do shell ops, is the system slow to respond? Based on
what you've reported, I'd be willing to bet that shell ops are pretty
responsive. I can't be 100% sure without more information, but I'm
willing to be that what your users
First off, you have 24G of RAM available and PostgreSQL only seems to
have access to 400M of it. Bump shared_buffers up to 2 or 3 G at least,
and bump up work_mem to at least a few hundred meg, and
maintenance_work_mem up to at 1/2G or so.
All right. Here is what I did. I setup a new shmmax
On 2010-12-22 07:53, S Mathias wrote:
http://help.godaddy.com/article/1054
# Set up SSL protection on your website.
is it an inescapable requirement to have a dedicated [not fix] ip address, when
i want to use ssl on my domain?
Obviously, you cannot have a website without an IP address.
75% user, 24.2% system, 0.0% idle. Despite those stats, I do not see what is
eating up 100% cpu time. I already restarted the computer but it is the same.
This problem started some hours ago. The CPU is hot, I can feel it on the air
stream pouring out the computer case. There are more people
Whats the output of systat -vmstat 1 ?
I have never used this command, so I do not know what it means. :-)
1 usersLoad 1.08 1.13 1.12 Feb 16 17:16
Mem:KBREALVIRTUAL VN PAGER SWAP PAGER
Tot Share TotShare
Hi All,
Got a problem with FreeBSD 6.2 (upgraded from 6.1): cron is not sending
out e-mails. However, it is running:
messias# ps ax | grep cron
988 ?? Ss 0:01.86 /usr/sbin/cron -s
But, if I write this into the crontab of root:
SHELL=/bin/csh
* * * * * echo Test
then I do not get
Hello,
I could install gdm with Xorg and vnc.so module loaded. This is fine,
now I can access that X server with vnc. The problem is that the Xorg
server needs a video card. So if somebody connects a montior to that
server while I'm working from home then he/she will see what I'm doing.
(I
Dear List,
I would like to use esddsp to forward sounds from a server to several
diskless clients. All clients have sound cards, and the esd daemon
started with
esd -promiscuous -tcp -pubic -port 1500
On the server side, I can play an mp3 file with
esddsp -v -s earth.msnet:1500
Hi,
I'm running several diskless boxes. They connect to the same server with
xdmpc (gdm). When a user logs in, the WM is started by script
/etc/X11/Xclients:
#!/bin/sh
xmodmap /etc/X11/xmodmap.hun
exec /etc/X11/startwm.py
You can find the startwm.py script at the end of this e-mail. Most
Unfortunately, I cannot debug this way. The error is that no files
are created by normal users, so I cannot use files for logging. Also
there is no console because this is the /etcX11/Xclients script, e.g.
it is executed by gdm after logging in to X window system through
xdmpc. Well, I might
Hi!
I tried to send the output of gmplayer to another computer. The other
computer is running an esd daemon. It works fine except that the volume
is always at 100%. If I try to change the volume inside gmplayer then it
freezes immediately. I guess it is because it tries to use /dev/mixer
but
I updated my ports tree 3 days ago, and did portupgrade -a
successfuly. I'm trying to play an mp3 file with this command:
%padsp mpg123 test.mp3
High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2 and 3.
Version 0.59r (1999/Jun/15). Written and copyrights by Michael Hipp.
Uses code
Ivan Voras írta:
Nagy László Zsolt wrote:
Hi,
I need to copy,move and delete files across two machines. They are
located far away from each other. I have other FreeBSD machines and
we were using SSH2 for this kind of task. Under windows, I could not
find the right software. This is an
From the manual:
NAME
uptime -- show how long system has been running
SYNOPSIS
uptime
DESCRIPTION
The uptime utility displays the current time, the length of time
the sys-
tem has been up, the number of users, and the load average of the
system
over the last 1, 5,
A job is a runnable process. The run queue is a list containing the
processes which are runnable at a particular time. Lower numbers
indicate lower CPU load. From man getloadavg:
Hmm. Somebody could modify the man page of uptime and add a reference to
getloadavg. Do you think this
Bram wrote:
Nikos Vassiliadis schreef:
On Wednesday 07 November 2007 18:02:44 Bram wrote:
Hi all,
Can you change the timeout for a tcp connection ?
I need to do the following: start a tcp connection , unplug the network
cable (it's actually wifi but the effect is the same),send some data
Hi All,
Is there a way (sysctl?) to tell FreeBSD (6.2 RELEASE) how many memory
can it use for caching file data from disk?
It might be that FreeBSD will use all available RAM, and reduce the
cache size whenever a program wants to allocate more memory. It is my
hope, but I could not find
Ivan Voras wrote:
Bruce Cran wrote:
Wojciech Puchar wrote:
Laszlo wrote:
Hi All,
Is there a way (sysctl?) to tell FreeBSD (6.2 RELEASE) how many
memory can it use for caching file data from disk?
It might be that FreeBSD will use all available RAM, and reduce the
cache
Bruce Cran írta:
Wojciech Puchar wrote:
Laszlo wrote:
Hi All,
Is there a way (sysctl?) to tell FreeBSD (6.2 RELEASE) how many
memory can it use for caching file data from disk?
It might be that FreeBSD will use all available RAM, and reduce the
cache
it already does
It may seem
Hi All,
I have a system where a diskless FreeBSD 6.3 i386 machine boots with pxeboot
from a FreeBSD 6.3 amd64 machine. I have lines in /etc/fstab for the diskless
machine like:
# DeviceMountPoint FsType Options DumpPass
172.16.0.1:/usr /usrnfs rw 0 0
Steve Franks wrote:
Few weeks ago, I installed apache22. Just wanted to put up some
family photos. Whenever I tried to connect, got a apache doesn't
have permisson to acess ~/. on this system or somesuch. The only way
to get around it appeared to be a chmod 777 on my pic folder (no luck
with
diskless101#mkdir /aaa
mkdir aaa: Read-only file system
Question: if the remount did not succeed, why didn't it throw an error? If
succeeded, why can't I write on the filesystem?
The answer to the second portion is that you're mounted as a read only
file system, so there's no write
Hi All,
Do you have any idea what is the problem with my settings? gdm places
this message in /var/log/messages:
Nov 20 12:19:05 cassiopeia gdm-binary[1167]: ERROR: Unable to connect to
socket: hostname nor servname provided, or not known aborting...
The local X server starts, but gdm is
The problem was that gdm was compiled with IPv6 support but the kernel
wasn't. This should not cause the gdm process to freeze and only exit
with kill -9 right?
Thanks,
Laszlo
___
freebsd-questions@freebsd.org mailing list
Hi,
On a client machine I invoke this command:
X -broadcast
On the server side, gdm is runnning with [debug] enabled=true and this is
logged:
Nov 21 13:23:38 cassiopeia gdm-binary[1569]: DEBUG: decode_packet: GIOCondition
1
Nov 21 13:23:38 cassiopeia gdm-binary[1569]: DEBUG: XDMCP:
Laszlo Nagy wrote:
On a client machine I invoke this command:
X -broadcast
On the server side, gdm is runnning with [debug] enabled=true and this
is logged:
Nov 21 13:23:38 cassiopeia gdm-binary[1569]: DEBUG: decode_packet:
GIOCondition 1
Nov 21 13:23:38 cassiopeia gdm-binary[1569]: DEBUG
I read your email about gdm and xdmcp
My setup for 2.20 does not work at all
so I installed the old 2.18.3 from the ports,
(I build the package from the ports) and it works
just ok as before...
I think there is a bug in the 2.20/2.21 xdmcp code... I
had no time to fix ...
Thank you for
Hi All,
My network configuration is a bit odd:
Internet --- SMC Hardware Router
(192.168.1.0/225.255.255.0) --- FreeBSD Gateway ---
(192.168.0.0/255.255.255.0) --- Client computer
- skype is running on the client computer.
- The FreeBSD Gateway is a
Jeff Maxwell wrote:
I have X11 installed on a server 6.1.
Is there an easy way to remove it all?
Do I have to remove each package individually?
Suppose you have installed the xorg server, you could remove it easily.
But it also matters how you installed. If you did it from ports, you can
Rodolfo Pellegrino wrote:
On Nov 28, 2007 2:29 PM, Laszlo Nagy [EMAIL PROTECTED] wrote:
Hi All,
My network configuration is a bit odd:
Internet --- SMC Hardware Router
(192.168.1.0/225.255.255.0) --- FreeBSD Gateway ---
(192.168.0.0/255.255.255.0
Do I have to remove each package individually?
Suppose you have installed the xorg server, you could remove it
easily. But it also matters how you installed. If you did it from
ports, you can probably
cd /usr/ports/x11/xorg
make deinstall
That just deletes the metaport (which
Hi All,
Here is a problem that I cannot solve. I have two offices with two file servers
(FreeBSD 6.1). Clients are accessing files over samba and nfs (on the local
server). I would like to share some directory structures between the two
offices. Originally I was thinking about sshfs
You need to create a VPN connection between your two offices. You can
do this in a variety of ways, but probably the best solution would be
to have static IP's for both offices and a router that has hardware
support for VPNs at each office. You can connect the two offices via
a VPN
Peter Svec wrote:
Hello Laszlo,
you don't need static IP address if you use hamachi. It is zero
configuration VPN tool, which creates peer-to-peer tunnel between two
host (with static or dynamic addresses). The problem is, that hamachi
isn't in the ports yet. Take a look at
Unless I'm very confused, BSD NFS can export directories and directory
trees in addition to filesystems. See export(5). Internet security
should be attainable with an appropriate firewall configuration that
allows the servers to only talk to each other.
IMHO you can export directory trees
I often suggest Coda (ports/net/coda6_server coda6_client) for this
sort of situation, but it has been so many years since I've used it
myself that I don't know what state it is in these days. I hope the
documentation has improved. Note the client runs on the local file
server, so you don't
It is hardly the freebsd community's fault that Skype / Ebay doesn't create a
FreeBSD binary. Actually, the linux compatibility layer is one of the great
things in FreeBSD. Of course, you may be having other issues we can't know
about until you kindly tell us (on a separate thread pls...)
Zbigniew Komarnicki wrote:
Hello,
can I ask you for help, how to set up flash in Firefox natively, step by step?
The only native solution I know of is gnash but last time I tried it
it was very unstable and very slow. I would rather try
linux-flashplugin7 and linuxpluginwrapper instead.
The flash-related questions/answers appeared probably 10 or 15 times on
various FreeBSD lists in last 3-4 months. These threads contain
everything related to installation problems, warning messages and other
problems. In total, if Flash7 and Acrobat plugins don't work inside
native browsers
Adobe. For example it runs on many platforms where Adobe's Flash
doesn't run. It will also perhaps soon hit the iPhone.
Useless to say Adobe are not so happy about it ;)
We are also not happy about that Adobe ignores other platforms. Blame it
on them. :-)
Hi,
I have to boxes, both are FreeBSD 6.2 -p7. I did this:
[EMAIL PROTECTED]:
ssh-keygen -t dsa
mv ~/.ssh/id_dsa.pub ~/.ssh/authorized_keys
chmod 640 ~/.ssh/authorized_keys
scp ~/.ssh/id_dsa [EMAIL PROTECTED]:~/.ssh
[EMAIL PROTECTED]:
mkdir .ssh
cat .ssh/config
host mybox
hostname
Hi Laszlo.
Isn't it just a matter of adding PasswordAuthentication no to
/etc/ssh/sshd_config? [At the server end, Captain Obvious prompts me.]
I'll check one of my old systems later but I think that's it...
Well, I have other users using public keys for logging in so the sshd
config must
Have you checked /var/log/auth.log on machine to which you are trying to
connect?
It contains nothing except:
Aug 30 13:54:19 box1 sshd[8199]: Accepted publickey for user2 from
81.1.19.245 port 54369 ssh2
Now here is what I did:
1. I deleted user2 with rmuser user2, but I did not
Laszlo Nagy wrote:
Have you checked /var/log/auth.log on machine to which you are trying to
connect?
It contains nothing except:
Aug 30 13:54:19 box1 sshd[8199]: Accepted publickey for user2 from
81.1.19.245 port 54369 ssh2
Sorry it was:
Aug 30 13:54:19 box1 sshd[8199]: Accepted
rm -fr /root/.ssh
cp ~user2/.ssh /root
chown -R root:wheel /root/.ssh
chmod 700 /root/.ssh
chmod 600 /root/.ssh/*
chmod 700 /root
ssh -l user1 mybox
Problem solved. I forgot to edit /root/.ssh/config
I still not sure why user recreation worked, but I don't care anymore.
Thank you for all
I have installed fusefs-sshfs. I tried this:
sshfs [EMAIL PROTECTED]:/usr/fileshare/pub /usr/fileshare/pub
fuse: failed to open fuse device: No such file or directory
sshfs has no manual page, just sshfs -h but it did not help.
I could not find useful information in the archives.
I have tried
Make sure your dependencies are correct:
$ ls /var/db/pkg|grep fuse
fusefs-kmod-0.3.9.p1
fusefs-libs-2.7.0_1
fusefs-sshfs-1.8
Same here. :-)
It should have been installed automatically. Not sure why it didn't.
My mistake. I did not add fusefs_enable=YES to rc.conf, because I
installed
Looks like your mount point didn't exist before connecting.
Shouldn't mount_sshfs check it?
No idea how to get rid of that bad descriptor -
neptunus# /usr/local/etc/rc.d/fusefs stop
Stopping fusefs.
kldunload: can't unload file: Device busy
Neither do I. :-)
but if you:
mkidr
Hi,
I cannot remove the user with 'miller'. pw says it does not exists.
However, rmuser says that it does exist, but it cannot delete it (I get
a no such file or directory message). I also tried to re-add this
user, but it also fails. (I have deleted 'miller' from /etc/passwd, but
it is no
Did you possibly delete it from /etc/passwd before you did everything else?
Yes.
It's not safe to edit /etc/password directly. If you issue vipw, does
the user still show up? if so, delete him there and /etc/passwd should
be regenerated correctly.
I did not know this. Thank you! I
Hi All,
I have a FreeBSD 6.2 RELEASE system that connects to the internet with
an ADSL connection. (pppoe). After some hours, it gets disconnected and
reconnected again. Each time it gets a new IP. The interesting part is
that the old IP address remains assigned. Here is an example:
tun0:
Hello All,
I have just upgraded my FreeBSD ports.
uname -a output:
FreeBSD cassiopeia.ronet 6.2-RELEASE-p1 FreeBSD 6.2-RELEASE-p1 #4: Sat
Feb 17 16:56:53 CET 2007
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/CASSIOPEIA i386
The ports tree was updated about three days ago. The newly
Jan Henrik Sylvester wrote:
[EMAIL PROTECTED] wrote:
On Tue, 5 Jun 2007, Jan Henrik Sylvester wrote:
For me, rdesktop works -- I have all my ports upgraded...
ldd `which rdesktop` says?
/usr/local/bin/rdesktop:
libcrypto.so.4 = /lib/libcrypto.so.4 (0x280a9000)
libX11.so.6
Jens B wrote:
* Kiffin Gish [EMAIL PROTECTED] [2007-06-09 09:45]:
I've been struggling now for 2 weeks trying to do the xorg upgrade,
following the upgrading instructions to a tee, but it has turned into a
complete mess.
If worse comes to worse, what it the best way to proceed?
Is there an
Anders Troback wrote:
On Wed, 06 Jun 2007 20:06:52 +0200
Laszlo Nagy [EMAIL PROTECTED] wrote:
Jan Henrik Sylvester wrote:
[EMAIL PROTECTED] wrote:
On Tue, 5 Jun 2007, Jan Henrik Sylvester wrote:
For me, rdesktop works -- I have all my ports upgraded
Hi,
My FreeBSD 6.2 server restarts suddenly once or twice a day. I believe
it is because the processor is overheated, but I'm not sure. Is there a
way to check this from software? I would like to install a hardware
monitor program that can log out processor temperature in every minute.
The
Check out healthd or mbmon. One or other has worked OK for me on
other Asus boards, and both are in ports (sysutils/ I think).
If you have ACPI and your board supports thermal zones, then you can
check those.
sysctl -a | egrep 'acpi.*therm'
or
sysctl -a | egrep 'acpi.*tz'
one or
Hi,
Can you tell me what kind of software should I use for organizing
photos? Here are my requirements:
- should be able to handle many photos (right now we are using Picasa on
Ubuntu but for 100 000+ photos it is very slow and unstable)
- should be able to save comments/annotations for
Daniel Rucci írta:
Ghirai wrote:
Hello list,
I had gnumeric installed, and wanted to upgrade.
portupgrade gnumeric failed because it wanted a newer version of
goffice.
I deinstalled the old goffice and did make install.
It fails here:
I'd remove devel/goffice/work and try make; make
I'd remove devel/goffice/work and try make; make install again .
I have the same problem. I did remove devel/goffice/work but it did not
help. (Ports tree was updated one day ago, and everything is being
updated with portupgrade -a)
It has been fixed in the tree:
Jeff Laine wrote:
Hi to all.
Stupid question here )
I've cvsup'ed recently from 6.1 to RELENG_6_3. All seems to works pretty
well right now. There are plenty of new drivers and fixes that I needed so
much! Many thanks to developers!
But now uname -a says it's 6.3-RELEASE. I thought it would
Hi,
I have this configuration:
Internet - [Hw Router] (LAN1: 192.168.2.0/24) - [
192.168.2.138 GatewayComp 192.168.0.1 ] -- (LAN2: 192.168.0.0/24)
I would like to access a computer from LAN1 to LAN2.
LAN1 machine is:
FreeBSD office1adsl.dyndns.org 6.2-RELEASE
Steve Bertrand wrote:
Internet - [Hw Router] (LAN1: 192.168.2.0/24) - [
192.168.2.138 GatewayComp 192.168.0.1 ] -- (LAN2: 192.168.0.0/24)
I would like to access a computer from LAN1 to LAN2.
Perform the following and post the results of:
- ping from GatewayComp to
- ping from pc on 0.0 network to 192.168.2.138
Well, I cannot do this from here. Those computers are X terminals,
they do not run inetd nor sshd. I cannot login from here and I cannot
leave now, but I can do it later if necessary.
- sysctl -a net.inet.ip.forwarding (on the GatewayComp)
Enviroment:
cassiopeia# uname -a
FreeBSD cassiopeia.ronet 6.3-PRERELEASE FreeBSD 6.3-PRERELEASE #2: Tue
Jan 15 04:41:41 EST 2008
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/CASSIOPEIA amd64
cassiopeia# portsnap fetch
Looking up portsnap.FreeBSD.org mirrors... 4 mirrors found.
Fetching
Laszlo Nagy írta:
- ping from pc on 0.0 network to 192.168.2.138
Well, I cannot do this from here. Those computers are X terminals,
they do not run inetd nor sshd. I cannot login from here and I cannot
leave now, but I can do it later if necessary.
- sysctl -a net.inet.ip.forwarding
Laszlo Nagy wrote:
Enviroment:
cassiopeia# uname -a
FreeBSD cassiopeia.ronet 6.3-PRERELEASE FreeBSD 6.3-PRERELEASE #2: Tue
Jan 15 04:41:41 EST 2008
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/CASSIOPEIA amd64
cassiopeia# portsnap fetch
Looking up portsnap.FreeBSD.org mirrors... 4 mirrors
Hi,
I would like to get the list of the users who are actively logged in
remotely with gdm, along with their IP address. The commands 'w' and
'users' does not work. What is the right command to get this list?
uname:
FreeBSD test.dyndns.org 6.2-RELEASE-p7 FreeBSD 6.2-RELEASE-p7 #4: Wed
How many files can I open under FreeBSD, at the same time?
Problem: I'm making a pivot table, and when I drill down the facts, I
would like to create a new temporary file for each possible dimension
value. In most cases, there will be less than 1000 dimension values. I
tried to open 1000
Directories generally start to perform poorly when you put too many files
in them (i.e. the time required to add a new directory entry or find
an existing name in the entry goes up)
If you're going to be making 10s of 1000s of files, I'd recommend making
a tree of directories. I.e., make
I need to install a new server. Primarily it will run apache + PHP +
PostgreSQL. Its main task is to serve several websites, and provide web
based admin interface for OLTP. The server will have 2xSAS disks in RAID
1 for the base system and 10xSATA2 disks in RAID 1+0 for the rest. The
SAS pair
For making backups I would probably just use FAT32 and tar, because
practically anything (not just FreeBSD Linux) will mount FAT32 file
systems, and tar should respect your file attributes (owner, group,
creation timestamp, last modified timestamp, etc).
Except that you cannot create files
#1 maildir stores each message in a separate file. I think I need to
dedicate a separate disk slice for maildirs and decrease block size
on it. How big should the blocksize be?
i have everything (/) on single partition on most of my servers,
including those having lots of mail.
I don't
You can treat UFS as ext2/3 with dir_index enabled by default (not
exactly but that's what dirhash translates to in practice).
UFS by default creates 2k fragments (sub-blocks), so in practice any
tuning in this direction won't do much.
More drives=better in this case. Don't forget to tune
Hi All,
There was a port called net/vnc that contained a vnc.so file. That file
could be loaded into the Xorg server and then I was able to monitor the
X desktop with VNC.
Now I'm using gnome, and gnome2-fifth-toe installs tightvnc. It
conflicts with net/vnc. So I cannot install net/vnc.
Sziasztok,
Ilyet látok top-ban:
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
11475 gandalf 1 -8 0 4600K 864K piperd 5 21:41 8.06% cat
11472 gandalf 1 -8 0 4604K 876K piperd 3 21:30 8.06% dd
Tehát összesen 16% procit zabál valami, amiről nem tudom hogy mi! ps ezt
mondja:
Hi,
I'm trying to add a new disk to my system. I'm ready with labeling the
disk. It is an SCSI device with and UFS partition and a SWAP partition.
The swap is turned off, and I would like to use it as journal space.
There is a screenshot attached showing what happens after entering
single
1 - 100 of 128 matches
Mail list logo