KR> WAF cad files

I just forwarded my WAF Files to Chris. Dave Mullins Gathering Bound Nashua, New Hampshire www.KR2S.com Chris Johnston wrote: >Would anyone have a set of cad files for the WAFS in either DXF or DWG > format for the water jet cutter. There is also a native format which the > water cutter

KR> Gathering Group Photos

Netters, Here are the links to the group photos I took at this years Gathering. I have included some of the early fly-bys that were taken in less than optimal weather conditions. I did get some better ones from Sunday's departures and will post them later tonight on web pages I am making today.

KR> main gear position for tri gear

Dene, My main gear axle line is 4" behind the rear face of the main spar. Dave Mullins Nashua, New Hampshire Dene Collett (SA) wrote: >Hi Guys >I am busy building the main gear legs for my tri gear and was just wondering >where the other guys with tri gear configs have positioned their wheels

KR>Facet Pump endurance

Netters, I have had one semi-failure of a facet fuel pump in my baja bug. A small piece of foam from the fuel cell came through the line and stopped the pump from working. I had to remove the fuel cell to get to the pump, dismantle, and clean out the debris. I later bought a fuel filter to go

KR>Facet Pump failure rate

Richard, I had to cut a space out of the foam for the fuel level sender. I replaced the foam back in the tank after cutting and a small piece dislodged and went through the fuel line to the pump. Dave Mullins Nashua, New Hampshire RICHARD G ALPS wrote: >Netters, >Sorry to poke my nose in, but

KR>Yahoo Groups

Mark, About Yahoo groups. I was on a list there for years that one day just disappeared without warning. The Group didn't break any of Yahoos rules. We think it was at the government's request because the group was about income taxes. The state versions of the national list were also shut down

KR> Website update/ Motivation

started to, but fizzled in a few weeks. I need to see some of the NEW birds that have been finished. (I still like to see the older ones too) Dave Mullins Nashua, New Hampshire Ron Smith wrote: >David Mullins <n32...@comcast.net> wrote: >Hi David, I have nothing to say about th

KR> Cockpit Width..

My KR2S has a cockpit width of 43" inside the fuselage walls and I am using a Dragonfly canopy. Dave Mullins Nashua, New Hampshire http://N323XL.iwarp.com ljhus...@wmconnect.com wrote: >What is the widest cockpit anyone in the group has build for shoulder width? >What is the widest you could

KR> 70 Days and Counting

Mark, Are you going to get up on a chair and dance for us like you did at the last Gathering? Dave Mullins Mark Jones wrote: >To the Gathering that is. > >Mark Jones > >___ >to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >please see

KR> Rand Gear vs Diehl Gear

Virg & Dick Rand fixed gear legs are made by Grove. Dave Mullins Nashua, New Hampshire VIRGIL N SALISBURY wrote: >Do not forget the Grove Gear, Virg > >On Tue, 10 Aug 2004 07:34:49 -0500 larry flesner >writes: > > >>> What are the major differences between the

KR> KR2 project for Sale on ebay

There are also five KR2 and two KR projects for sale on Barnstormers.com. posted in the last two months. Dave Mullins Nashua, New Hampshire Gathering Bound (Arriving STL @ 12:05 Thursday)

KR> Re: To The Airport

Rich, Does that advice come from experience? Dave Mullins Nashua, New Hampshire rparker wrote: >You'll sleep better knowing the kids wont be able to poke any holes in it. :--) > >Rich Parker >Peterborough, NH >rpar...@wwhotspots.com >http://theparkers.wwhotspots.com/ > > >

KR>Red Oak Bachelorette Party

Mark, I am single, so whatever I did at the bachelorette party was OK! I did like the "Suck for a Buck" T-shirt she was wearing with all the LifeSaver candies attached. I went after the best positioned one, If you get my drift? I wonder what will happen this year? If you would like to know too,

KR> Digital Protractor

When I was in the market for one. I looked on line for the best price. Most places wanted around $200. A week after I bought mine I found them for $140 at Enco. http://www.use-enco.com http://www.use-enco.com/CGI/INSRIT?PMAKA=240-0341=4822126=INLMK3 Dave Mullins Nashua, New Hampshire Mark Jones

KR> Mylar Gap Seals REVISED

Mark, Here is ther place that I bought my Precurved mylar gap seals: http://www.wingsandwheels.com/page28.htm Dave Mullins Nashua, New Hampshire Mark Jones wrote: >Here is the deal.the group buy is off. Eric Pitts, one of the newest KR >family members has introduced me to a company where

KR> MSD Coil Selector

You can find them at: http://www.jegs.com or http://www.summitracing.com/ Dave Mullins Nashua, New Hampshire Eduardo Iglesias wrote: >Hi > >Does anybody knows where can I buy a MSD 8210 Coil Selector? >Thanks >Eduardo >--- >[This E-mail scanned for viruses by Declude Virus] > >

KR>KR2s for sale on Ebay (NO,it's not mine!)

Found this KR2S on Ebay, $3500, subaru engine w/ redrive Located in Broward County Florida. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem=2411764783 Dave Mullins Nashua, New Hampshire

KR>Grove or Diehl

John, I have the Grove gear mounted on my KR2S as a tri-gear setup. You can check out my landing gear at these pages on my website. http://n323xl.iwarp.com/bllandinggear1.htm Dave Mullins Nashua, New Hampshire JOHN SAUNDERS wrote: > > Hello, my name is John Saunders. I am a long time

KR>Grove gear

Orma, I talked to Jeanette at the last gathering. In that conversation she stated that the gear she offered was made by Grove. Robbie Grove started offering them for the KR directly a few years later. Dave Mullins Nashua, New Hampshire aviationm...@aol.com wrote: > > Help me out Netters,

KR>Lighting up your KR

Dana, You can Cut it but you need to seal the cut end with silicone or equivelent. The best place I found for this stuff is http://www.elwirecheap.com You can get it in different colors and thicknesses. I am using the blue/green tape instead of the wire version. See

KR>1.43oz fiberglass

Netters, Here is a deal on some 1.43oz fiberglass for that final layer. You had better hurry he only has 98 rolls left after I bought one. 98 rolls of fiberglass on the wall, 98 rolls of fiberglass, Take one down and ship it to a KR builder, 97 rolls of fiberglass on the wall, . You guys

KR>Landing Gear

Tim, You can check out what I did to mount the Grove Gear on my bird at the link below. I made a simple "L" bracket with sides using 4130. The gear is bolted on with radius blocks and 3/8" bolts. You can mount the brackets so they just touch the bottom skin. That way the only clearance holes

KR>Oil cooling

...@charter.net David Mullins Nashua, New Hampshire Gathering Bound larry severson wrote: > Has anyone tried extruded aluminum cooling fins that clamp over the > oil filter that is sold by Aircraft Spruce? Sounds neat, if it works. > > > Larry Severson > Fountain Valley, CA 9270

KR>(no subject)

Dan, I'm not in Connitecut, But for a short road trip you can come up here and see my bird under construction. My plane is at the Nashua Airport (KASH) We can also go see Paul O'rielly's KR2 in Derry NH and Rich Parker's KR2S in Peterborough NH. Nashua is just over the Mass/NH border on Route 3.

KR>RED OAK - GATHERING/ Roll Call

Joe Horton and I will be arriving together at 1:30PM in Omaha on the 11th. Should be in Red Oak about 3 PM Dave Mullins Nashua, New Hampshire http://N323XL.iwarp.com Mark Jones wrote: >Roll Callwho is going? > >I am and I can hardly wait > >Mark Jones (N886MJ) >Wales, WI USA >E-mail

KR> Dr.Dean Hinges

Justin, The way I did mine was to draw a center line on one spar. Mark the cross points at each hinge location. Clamp the two spars together offseting them .400" longitudinally. Then drill both spars at the same time. A 3/16" rod can hold them together while you foam and glass the HS & VS

KR>Wynnes Engine Mount

Rich, The 10.125" X 10 .25" are correct Dave Richard Parker wrote: > > Wiiliam Wynnes sample engine mount drawing shows the motor mount > bushing location centers as 10.125 x 13.25. My engine tabs measure > approx 10.125 X 10.25. > > Although I'm going with Dave mullins engine mount set up

KR>Aileron Control

Les, Here is the link to the site were I puchased my push-pull cables. http://www.outdoorsuperstore.com/store/products/category.asp?categoryID=61805 The 33C cables are 10-32 threads and the 43C cables are 1/4-28 Dave Mullins Nashua, New Hampshire Les Criscillo wrote: >Let me know what you

KR>Aileron Control

ot one. I'll need something shorter than that I think ...but at >least it's a place to start! Thanks again! > >Les Criscillo >Tampa, FL > >lcris...@tampabay.rr.com >leslifeandfrie...@groups.msn.com > - Original Message - > From: David Mullins > To: KRnet

KR>Recommendation from Rick Wilson

Why don't you just ask the horses mouth? ME This is an extra engine for my use. I originally made this one for a second project. Now I am building two 3100cc engines, one direct drive for the KR and one with a 2.09:1 planetary redrive for the next project. I had saved up the money to do the

KR>Plywood Listing

Justin, I have used the 1/8" 6 ply birch plywood GL-II from Finland. I purchased it from Harbor Sales in Maryland. The Last time I went by they stopped carrying it. Boulter Plywood has just started selling this plywood about 1 to 1.5 years ago. Boulter is about 1 hr drive from me in Boston. I

KR> experimenter Polyisocyanurate Foam

You should also look for Trymer 2000. I found a supplier nearby a few years back, but they don't carry it anymore. Dave Mullins Nashua, NH Ronald E. Haskell wrote: > Is anyone using Polyisocyanurate Foam, (e.g. Tuff-R) in their construction? > > The last mention of it on the search engine was by

KR> 2009 KR Gathering

da...@windstream.net wrote: > the KR Gathering for 2009 is at: > Mt. Vernon Airport - MVN > September 18 and 19. *The hard core KR persons will show up on Thursday*, and > we all leave sometime Sunday morning. For all the information you will ever > need to know about the KR Gathering, go to

KR> Wicks parts Pickup

Pat, I will be in Mt Vernon from late Saturday the 12th thru Monday the 21st. I plan on making a trip to Wicks to get a new 5 gallon bucket of Aeropoxy for my wings. Setup everything with Wicks for me to pick them up on Monday or Tuesday andI will get them for you. Dave Mullins Nashua, NH

KR> Gathering Corvair Crank Drilling and Tapping

If it is available, I will bring may spare crank that I didn't get a chance to tap at CC#14 I also have a 1"-14 Tap, The one I found at the tool place was a left hand model. I had to swap it for one with a right hand thread. Dave mullins Nashua NH Gathering Bound on the 11th!!! OT: I am

KR> One week to the Gathering!

I am already in Dayton, OH to visit the Air Force Museum. Arriving at Mount Vernon later this evening. To the rest of you LATE COMERS, I will see you when you arrive on Thursday. Dave Mullins Nashua, NH

KR> One week to the Gathering!

Nashua, NH David Mullins wrote: > I am already in Dayton, OH to visit the Air Force Museum. Arriving > at Mount Vernon later this evening. To the rest of you LATE COMERS, > I will see you when you arrive on Thursday. > > Dave Mullins > Nashua, NH > >

KR> Gathering weather

They are calling for 50% chance of rain on Tuesday I didn't look at the long range forecast for the area yet. I went up in Chris Collins' airplane today to do some air to air shots of a LSA Jabaru for the LSA fly-in they are having here in Mt. Vernon. In Mt Vernon waiting on the early birds to

KR> Food at the Gathering

Steve, The airport Restaurant (Grandma's Landing) has a lunch buffet from 11am to 2pm Daily. I don't know about supper time though. I am here in Mt. Vernon already and can take you to Ryan's Restaurant. You can eat enough food there to last you all weekend. Dave Mullins Nashua, NH Steven

KR> Food at the Gathering Thursday night

Can you ship some by UFO? Dave Mullins Nashua, NH M wrote: > Wished I could make it this year, I would bring Alien Beer, taste is > out of this world! > > Mike Turner > Edgewood New Mexico > > > > > Larry Flesner > > > > I will be getting there Thursday around 1300 and will bring

KR> Bad News: N4DD Down at MVN

Just a short note that N4DD crashed on landing today at Mt. Vernon. Dan Freeman has some good cuts and scrapes on his head, arms and feet, but should pull through. He is currently at a local hospital being treated for his injuries. I almost had the crash in pictures as I was walking out of the

KR> Bad News: N4DD Down at MVN

Latest on Dan: He was transported from the local Mt Vernon hospital to one in St. Louis. Dave David Mullins wrote: > Just a short note that N4DD crashed on landing today at Mt. Vernon. > Dan Freeman has some good cuts and scrapes on his head, arms and > feet, but should pull th

KR> Bad News: N4DD Down at MVN

that went down about 2 miles from the end of the runway last night. He was a KR from Colorado. The name was Bulla. He suffered 5 broken ribs with the plane totally destroyed. He was airlifted to a hospital in St. Louis. Speculation is that he ran out of fuel. Dave Mullins David Mullins wrote

KR> Dave Mullins

Dan, You have a good email address for me. I got a call last week that my father had a major heart attack during his Dialysis treatment, so I have been in Baltimore for the past week or so. I will get you the CD of the accidents out today or tomorrow. I just got back home New Years Eve. Dave

KR>KR newsletter

Glenn, Larry Capps owns the copyrights to the KR Newsletter and has already scanned all the issues to PDF and has a CD available for purchase. Dave Mullins Nashua, NH Glenn Martin wrote: > I have a great number of the old KR newsletters which I am going to > start scanning into PDF files. If

KR> KR GATHERING

Netters, Unfortunately, I will not be able to attend this years Gathering. I am in the middle of negotiations to build myself a home. The money that I would have spent is needed for the down payment and closing costs. The house will be a 1400 square foot Ranch with a full drive under basement.

KR> tip tanks

I liked the looks of tip tanks and have some fake ones made them to go onto my wings. Dave Mullins Nashua, NH Fred Johnson wrote: > Rudi wrote: > > "Sakkie's plane with tip-tanks, ZS-UKU, is currently being restored after > standing for many years, more information available here: >

KR> Gathering

I am coming in on Wed the 2nd at 11am @ PDX. Reserved a Quad Cab pickup at off airport Car rental. Return on Sunday with a 6:45A Departure flight. Dave M Nashua NH On 8/10/2015 2:14 PM, jon kimmel via KRnet wrote: > Things might work out at the last minute for me to come to the >

KR> Fuel capacity

On my 3XL KR2S the Stub wing tanks calculated out to 14.5 Gal each. They are aluminum following the contour of the airfoil between the Spars. My stub wings are 2 feet long. The Header tank, I am guest-a-mating at 18-20 Gal. I will have to find that out when I fill it. Dave Mullins Nashua NH

KR> Gathering transportation?

Larry, I have a 6:45a departure at PDX. I will be staying at the Mcminville Inn. Dave Mullins Nashua NH On 8/26/2015 8:58 PM, Flesner via KRnet wrote: > > > Is anyone leaving the Gathering Sunday morning early and headed up to > Portland airport with an empty seat? I need to be at the

KR> KR Gathering

Off to the Airport, See y'all there! Dave Mullins Nashua NH

KR> Gathering photos

Thanks for the Compliment. I was the one who set up the group photoshoot with the help of Chris Collins (MVN Manager) for getting the Bucket Truck. I hold an Associate of Science Degree in Photography and have been photographing for about 35 years. For more of my photos visit here:

KR> 2016 KR Gathering location...MVN?

> , "Randy Moore Newbern Tn. N318RM via KRnet" wrote: > i bet the builders who show up will be bigger. > > > Randy Moore > Newbern Tn 38059 > > I am already bigger, I need to get SMALLER! Dave M Nashua NH