Re: export doc/fr/Additonal.lyx to pdf4 still fails

Am 24.11.2015 um 21:44 schrieb Georg Baum: Noone needs to export this document with XeTeX so this may be wasted effort. +1 IMHO it would be a good idea to create a bug report (not demanding working XeTeX export, but for fixing the iconv error). Done: http://www.lyx.org/trac/ticket/9871

file generation after compilation is always executed twice

This is a long standing and annoying problem I am facing when compiling LyX. When I compile LyX via CMake using "build-install" then - the compilation of LyX and tex2lyx works fine - the files like e.g. the gmo-files are created - but after this is done, the files are immediately created again

Re: file generation after compilation is always executed twice

Am Mittwoch, 25. November 2015 um 00:23:32, schrieb Uwe Stöhr > This is a long standing and annoying problem I am facing when compiling > LyX. When I compile LyX via CMake using "build-install" then > > - the compilation of LyX and tex2lyx works fine > - the files like e.g.

Re: Font of LyX manuals

Am 30.10.2015 um 09:08 schrieb Guenter Milde: LyX manuals currently use user-preamble code to set the font depending on the export route and availability: * Latin Modern (CM-extension) with PDF(luatex), PDF(pdflatex), if lmodern.sty is installed This is the only export the manuals are

Re: simple [patch] support for verbatim*

Am 24.11.2015 um 03:10 schrieb Richard Heck: Uwe, please test that this new patch does what you want it to do. I've tested it, but only minimally. Many thanks. It did not work because you output "verbatim" no matter if it was the starred version or not. I corrected this and put it in.

Re: mhchem and Xe/LuaTeX problems

Am 22.11.2015 um 22:59 schrieb Guenter Milde: My intention was not to separate this. chemical equations are formulas nevertheless. They are formulas, but not mathematical ones, so I would rather place this in "specific manuals > Chemical Formulas". Is this really necessary? One more file

Lower case mathcal

Dear LyX folk, Quick question — what would it take to get display support for lower case calligraphic letters, which you can get in your rendered PDF via a package like BOONDOX-cal. Currently, typing lower case letters inside a \mathcal tag in math mode generates a seemingly random selection

Re: Lower case mathcal

On 11/24/2015 02:58 PM, Christopher Menzel wrote: > Dear LyX folk, > > Quick question — what would it take to get display support for lower case > calligraphic letters, which you can get in your rendered PDF via a package > like BOONDOX-cal. Currently, typing lower case letters inside a \mathcal

Re: [LyX/master] Document the export tests and other tests

Kornel Benko wrote: > Am Sonntag, 22. November 2015 um 19:22:42, schrieb Georg Baum > > >> 2) >> - autotests/export/ for export tests (does not work with the current >> test >> machinery) > > It is now possible. > All the tests there will be labeled by

Re: [LyX/master] Document the export tests and other tests

Guenter Milde wrote: > On 2015-11-22, Georg Baum wrote: > >> 1) lib/tests/ (or any new directory not at top level) just for new >> dedicated export tests (will cause problems in cmake if other tests than >> export tests are added) > > Don't like this, as binary LyX packages (*.deb, *.rpm)

Re: Lower case mathcal

Christopher Menzel wrote: > Dear LyX folk, > > Quick question — what would it take to get display support for lower case > calligraphic letters, which you can get in your rendered PDF via a package > like BOONDOX-cal. Currently, typing lower case letters inside a \mathcal > tag in math mode

Re: 'make check' still fails

On 11/24/2015 02:37 PM, Georg Baum wrote: > Scott Kostyshak wrote: > >> On Sun, Nov 22, 2015 at 06:40:45PM +, Guillaume Munch wrote: >>> Le 22/11/2015 17:38, Georg Baum a écrit : It is now also clear that the MSVC workaround is not needed, so I deleted it. Is the attached patch OK to

Re: export doc/fr/Additonal.lyx to pdf4 still fails

Guenter Milde wrote: > Dear Lyxers, > > thanks to Uwe for removing the non-ASCII character from ERT in > doc/fr/Additonal.lyx in 98746f3bda2df7d3/lyxgit. > > Unfortunately, the export to XeTeX > > lyx-svn -e pdf4 Additional.lyx > > still fails (error log below). > > What shall we do? >

Re: simple [patch] support for verbatim*

Uwe Stöhr wrote: > Why do you want to see the obvious changes to the FORMATS file and the > changed digits of the version? They are obvious and only cost you time > to test the patch because you are then forced to a complete > recompilation. (This takes here 15 min). This is indeed too slow.

Re: simple [patch] support for verbatim*

Richard Heck wrote: > I was mostly thinking that (a) if we're going to add this for 2.2, the > tex2lyx part should also be done---the rule you quoted applies to > mid-cycle commits and doesn't say anything about what should be done for > a major release---and (b) that the test file I attached (a

Re: simple [patch] support for verbatim*

On 11/24/2015 03:05 PM, Georg Baum wrote: > Of course tex2lyx should either do a perfect roundtrip, or create > proper ERT for the new feature. If it does not, then this has to be > fixed. However, if there is a bug in tex2lyx that makes it produce > invalid output for the new feature, which can

Re: Lower case mathcal

Le 24/11/2015 19:58, Christopher Menzel a écrit : Dear LyX folk, Quick question — what would it take to get display support for lower case calligraphic letters, which you can get in your rendered PDF via a package like BOONDOX-cal. Currently, typing lower case letters inside a \mathcal tag in

Re: #9841: Preferences specific to the user and not to the file should not be recorded in the file

Guillaume Munch wrote: >> 3. General preference (not sure if document or user) for ignoring non >> essential >> changes, which disturbs version control flow. Similar to 1. but it >> would encompass e.g. CT on/off, output_changes, GUI justification. >> I have another candidate here as

Re: Lower case mathcal

On 2015-11-24, Guillaume Munch wrote: > Le 24/11/2015 19:58, Christopher Menzel a écrit : >> Dear LyX folk, >> Quick question — what would it take to get display support for lower >> case calligraphic letters, which you can get in your rendered PDF via >> a package like BOONDOX-cal. or

Re: Lower case mathcal

On 2015-11-24, Richard Heck wrote: > On 11/24/2015 02:58 PM, Christopher Menzel wrote: >> Dear LyX folk, >> Quick question — what would it take to get display support for lower case >> calligraphic letters, which you can get in your rendered PDF via a package >> like BOONDOX-cal. Currently,

Re: My current test failures

On 2015-11-24, Scott Kostyshak wrote: > On Tue, Nov 24, 2015 at 07:21:41AM +, Guenter Milde wrote: >> >> > Below are my current (on 77979d91) test failures: ... >> This exactly was my critique: your list contains both "straight" and >> "inverted" tests and it is not clear which of them

Re: Win and Mac 2.2.0alpha1 installations independent, right?

On Tue, Nov 24, 2015 at 11:29:58AM +0100, Stephan Witt wrote: > See this mail: > > http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg190300.html +1 Enrico, should we put that patch in for alpha2 and see what happens? Scott signature.asc Description: PGP signature

Re: export doc/fr/Additonal.lyx to pdf4 still fails

On 2015-11-24, Georg Baum wrote: > Guenter Milde wrote: >> Dear Lyxers, >> thanks to Uwe for removing the non-ASCII character from ERT in >> doc/fr/Additonal.lyx in 98746f3bda2df7d3/lyxgit. >> Unfortunately, the export to XeTeX >> lyx-svn -e pdf4 Additional.lyx >> still fails (error log

Re: My current test failures

On Wed, Nov 25, 2015 at 07:11:50AM +, Guenter Milde wrote: > On 2015-11-24, Scott Kostyshak wrote: > > I see. Then I will wait to run the tests again until I get the green > > light that the test results are easy to interpret. > > Don't wait. I can now interpret the results and having such

Re: simple [patch] support for verbatim*

On Tue, Nov 24, 2015 at 03:13:12PM -0500, Richard Heck wrote: > On 11/24/2015 03:05 PM, Georg Baum wrote: > > Of course tex2lyx should either do a perfect roundtrip, or create > > proper ERT for the new feature. If it does not, then this has to be > > fixed. However, if there is a bug in tex2lyx

make distcheck: cannot remove '../../po/lyx.pot'

Can anyone else reproduce this error from the following command? # make sure no local changes you want to keep in your LyX directory # first do 'git reset --hard' # then 'git clean -xdf' ./autogen.sh && ./configure --enable-build-type=pre --disable-nls && make && make check && make distcheck &&

Re: My current test failures

Am Mittwoch, 25. November 2015 um 02:28:50, schrieb Scott Kostyshak > On Wed, Nov 25, 2015 at 07:11:50AM +, Guenter Milde wrote: > > On 2015-11-24, Scott Kostyshak wrote: > > > > I see. Then I will wait to run the tests again until I get the green > > > light that the test

alpha2

Thanks to Georg for clearing up the regex situation. It would be nice to make an attempt at a fix for the Windows icon issue that Andrew has reported. Any opinions on putting this patch in alpha2? http://www.mail-archive.com/lyx-devel@lists.lyx.org/msg190300.html Scott signature.asc

Re: My current test failures

Am Dienstag, 24. November 2015 um 15:48:36, schrieb Guenter Milde > On 2015-11-24, Kornel Benko wrote: > > Am Dienstag, 24. November 2015 um 11:52:19, schrieb Guenter Milde > > > >> On 2015-11-24, Kornel Benko wrote: > > > >> >> I am in the process of

Re: simple [patch] support for verbatim*

Le 24/11/2015 18:57, Richard Heck a écrit : I was mostly thinking that (a) if we're going to add this for 2.2, the tex2lyx part should also be done---the rule you quoted applies to mid-cycle commits and doesn't say anything about what should be done for a major release---and (b) that the test

Re: My current test failures

On Tue, Nov 24, 2015 at 07:21:41AM +, Guenter Milde wrote: > On 2015-11-24, Scott Kostyshak wrote: > > On Mon, Nov 23, 2015 at 10:40:11PM +, Guenter Milde wrote: > >> On 2015-11-21, Scott Kostyshak wrote: > > >> > Below are my current (on 77979d91) test failures: > > >> Thank you for the

Re: export doc/fr/Additonal.lyx to pdf4 still fails

On Tue, Nov 24, 2015 at 10:49:38AM +, Guenter Milde wrote: > Dear Lyxers, > > thanks to Uwe for removing the non-ASCII character from ERT in > doc/fr/Additonal.lyx in 98746f3bda2df7d3/lyxgit. > > Unfortunately, the export to XeTeX > > lyx-svn -e pdf4 Additional.lyx > > still fails

Re: simple [patch] support for verbatim*

On 11/23/2015 10:33 PM, Scott Kostyshak wrote: > On Mon, Nov 23, 2015 at 09:10:23PM -0500, Richard Heck wrote: > >> Uwe, please test that this new patch does what you want it to do. I've >> tested it, but only minimally. >> >> Another issue is that \verbatim* is not presently handled properly by

Re: [PATCH] Re: Regression in lyx2lyx box alignment

  Original Message   From: Jean-Marc Lasgouttes Sent: Dienstag, 24. November 2015 09:33 > As I already explained in the relevant thread, there are already cases where we do what you want: table cells and floats. It would be trivial to extend this so that alignment is done like that also for

Re: 'make check' still fails

Scott Kostyshak wrote: > On Sun, Nov 22, 2015 at 06:40:45PM +, Guillaume Munch wrote: >> Le 22/11/2015 17:38, Georg Baum a écrit : >> >It is now also clear that the MSVC workaround is not needed, so I >> >deleted it. Is the attached patch OK to go in? >> >> Looks good (I trust that the small

Re: Win and Mac 2.2.0alpha1 installations independent, right?

Le 24/11/2015 02:03, Uwe Stöhr a écrit : Am 24.11.2015 um 01:56 schrieb Scott Kostyshak: The svgz icons aren't displaying for me in 2.2 and evidently... Interesting. This is bad news. I thought they are only shown with Qt 5.5 but I compiled alpha1 with Qt 4.8. And did you include the

Re: [PATCH] Fix offset error in computation of hfills

Le 24/11/2015 01:48, Uwe Stöhr a écrit : Am 23.11.2015 um 18:05 schrieb Jean-Marc Lasgouttes: Can I commit this first patch? The patch looks reasonable but why is this change necessary?: -dim = Dimension(10, 10, 10); +dim = Dimension(5, 10, 10); Maybe the reason for the

Re: [PATCH] Re: Regression in lyx2lyx box alignment

Le 24/11/2015 01:21, Uwe Stöhr a écrit : Yes. Sorry, I meant the extra space. And this was the reason why I once added the possibility to set the vertical alignment in boxes - for this application there must not be extra space as I demonstrated. As we now have the infrastructure to display the

Re: [PATCH] Fix offset error in computation of hfills

Le 24/11/2015 00:55, Guillaume Munch a écrit : A simple argument for going further and getting rid of ParagraphMetrics::hfillExpansion (which I understand is causing the remaining problem) is that LyX's row breaks are different from LaTeX's anyway, as shown in Example 3 (or whenever there is a

Re: Win and Mac 2.2.0alpha1 installations independent, right?

Le 24/11/2015 04:02, Andrew Parsloe a écrit : Removing the svgz does allow the png icons to display. Andrew, can you have a look where LyX 2.2 is installed and look whether there is a dll like qtsvg.dll? It is known that not installing (or linking against) this dll will cause the problem you

Re: My current test failures

Am Dienstag, 24. November 2015 um 07:21:41, schrieb Guenter Milde > On 2015-11-24, Scott Kostyshak wrote: > > On Mon, Nov 23, 2015 at 10:40:11PM +, Guenter Milde wrote: > >> On 2015-11-21, Scott Kostyshak wrote: ... > >> Here, IEEEtran-Conference.lyx compiles with

Re: Win and Mac 2.2.0alpha1 installations independent, right?

Am 24.11.2015 um 11:10 schrieb Andrew Parsloe : > On 24/11/2015 9:54 p.m., Jean-Marc Lasgouttes wrote: >> Le 24/11/2015 04:02, Andrew Parsloe a écrit : >>> Removing the svgz does allow the png icons to display. >> >> Andrew, can you have a look where LyX 2.2 is installed

Re: Win and Mac 2.2.0alpha1 installations independent, right?

On 24/11/2015 9:54 p.m., Jean-Marc Lasgouttes wrote: Le 24/11/2015 04:02, Andrew Parsloe a écrit : Removing the svgz does allow the png icons to display. Andrew, can you have a look where LyX 2.2 is installed and look whether there is a dll like qtsvg.dll? It is known that not installing

Re: My current test failures

On 2015-11-24, Kornel Benko wrote: > Am Dienstag, 24. November 2015 um 07:21:41, schrieb Guenter Milde > ... >> >> > 3900:NON_STANDARD.export/templates/IUCr-article_pdf4_systemF >> >> > 4033:export/templates/ectaart_dvi3_texF >> >> >

Re: [LyX/master] Document the export tests and other tests

On 2015-11-21, Kornel Benko wrote: > Am Samstag, 21. November 2015 um 22:21:59, schrieb Guenter Milde > ... >> >> >> >> ATM, the line reads >> >> >> >> 'foreach(libsubfolderx lib/doc lib/examples lib/templates)' >> The idea was to put the test code not under lib (reserved

Re: My current test failures

On 2015-11-24, Kornel Benko wrote: >> I am in the process of devicing a new categorization (or naming for the >> categories), for what we currently call "nonstandard", I have: >> + unreliable# export may work or fail (we don't know for sure) >> - nonstandard # requires

Re: My current test failures

Am Dienstag, 24. November 2015 um 10:52:55, schrieb Guenter Milde > On 2015-11-24, Kornel Benko wrote: > > Am Dienstag, 24. November 2015 um 07:21:41, schrieb Guenter Milde > > > > ... > > >> >> >

Re: My current test failures

On 2015-11-24, Kornel Benko wrote: > Am Dienstag, 24. November 2015 um 11:52:19, schrieb Guenter Milde > >> On 2015-11-24, Kornel Benko wrote: >> >> I am in the process of devicing a new categorization (or naming for the >> >> categories), for what we currently call

Re: My current test failures

Am Dienstag, 24. November 2015 um 11:52:19, schrieb Guenter Milde > On 2015-11-24, Kornel Benko wrote: > > > >> I am in the process of devicing a new categorization (or naming for the > >> categories), for what we currently call "nonstandard", I have: > > >> + unreliable