Craig,
There were two auxiliary propulsion units (APUs) mounted about 1/3 of the
ship's length from the bow. They were electric and could be retracted when not
in use, and rotated 360 degrees. A skilled ship driver could use those and the
main engine to maneuver pier-side or get underway with
On Sat, 12 Sep 2015 21:02:28 -0500 OK Don via Mercedes
wrote:
> Hmmm - perhaps one of these would work for a series hybrid system?
>
> http://www.jakadofsky.com/index1.php?bereichID=11&lang=en
>
> Here's another one - just add the generator:
>
> http://www.jetcatusa.com/spt5.html
Actually, b
On Sat, 12 Sep 2015 22:04:24 -0400 Max Dillon via Mercedes
wrote:
> The gas turbines on my old ship drove the main reduction gear by
> pushing the hot exhaust gas over a turbine, which was mechanically
> connected to drive an input shaft. This was called a fluid coupling.
I wonder how efficient
On Sat, 12 Sep 2015 21:02:28 -0500 OK Don via Mercedes
wrote:
> Hmmm - perhaps one of these would work for a series hybrid system?
>
> http://www.jakadofsky.com/index1.php?bereichID=11&lang=en
> 24/28 Volt, 300 Amps continuous
8.4 kW
> Consumption: 10 litres (2,5 gal) per hour
The gas turbines on my old ship drove the main reduction gear by pushing the
hot exhaust gas over a turbine, which was mechanically connected to drive an
input shaft. This was called a fluid coupling. The red. gear brought the speed
down from some high RPM to about 100 RPM, and then the propell
Hmmm - perhaps one of these would work for a series hybrid system?
http://www.jakadofsky.com/index1.php?bereichID=11&lang=en
Here's another one - just add the generator:
http://www.jetcatusa.com/spt5.html
--
OK Don
NSA: The only branch of government that actually listens to US citizens!
*“
McLain via Mercedes
To: Mercedes Discussion List
Cc: Curly McLain <126die...@gmail.com>
Sent: Saturday, September 12, 2015 7:55 PM
Subject: Re: [MBZ] Turbines for power and heat [was Re: The demise pf Pruis
h*ters]
Seems like a good application for a CVT.
>GMANN: Some years a
Seems like a good application for a CVT.
GMANN: Some years ago, I was involved in the design and build of a Allison 250
turbine engine sprint car [dirt track]. The engine used for that car came
from the residual engines from the Indy car. It came as a pallet of parts
and tech manuals.
The car w
On Sat, 12 Sep 2015 11:52:18 -0500 Mountain Man via Mercedes
wrote:
> Jim wrote:
> > 90% of such a proposal would be a materials problem.
>
> GE made the news this year - 3D printed turbine engine.
> What's that all about?
> mao
http://3dprintingindustry.com/2014/11/11/ge-test-fires-mini-3d-pri
On Sat, 12 Sep 2015 11:52:18 -0500 Mountain Man via Mercedes
wrote:
> Jim wrote:
> > 90% of such a proposal would be a materials problem.
>
> GE made the news this year - 3D printed turbine engine.
> What's that all about?
> mao
http://3dprintingindustry.com/2014/11/11/ge-test-fires-mini-3d-pri
I've always (well, since about 1946, anyway) thought it should be unlimited.
Wilton
- Original Message -
From: "Rich Thomas via Mercedes"
To:
Cc: "Rich Thomas"
Sent: Saturday, September 12, 2015 12:34 PM
Subject: Re: [MBZ] Turbines for power and heat [was R
Some years ago, I was involved in the design and build of a Allison 250
turbine engine sprint car [dirt track]. The engine used for that car came
from the residual engines from the Indy car. It came as a pallet of parts
and tech manuals.
The car was configured as a 4 wheel drive sprint car, turbin
Jim wrote:
> 90% of such a proposal would be a materials problem.
GE made the news this year - 3D printed turbine engine.
What's that all about?
mao
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change
cool. I didn't read the earlier posts but figured someone must have
remembered that. Us Hoosiers I guess...
I have this idea that there should be an "unlimited" race series, let
the drivers assess the risk and have at it. It would generate all kinds
of interesting engineering and vehicles a
I mentioned this early in the thread.
I saw the car run twice (actually more than that if you include time trials and
carburetion day) and it was amazing.
Yes, it dropped out with eight laps to go, not due to an engine issue but a
bearing failure in the transmission.
The following year it was
90% of such a proposal would be a materials problem. Advantages
are that we're only talking about maybe 20HP, so the diameter of
the thing would be small, making the physical (but not thermal)
stresses more modest. There would be LOTS of details to work
out; the development bill would be large.
Hey, y'all remember Parnelli Jones's turbine car at the Indy 500,
right? Mid-late 60s? I think he ran it 2 years and it was cleaning up
the first time until a transmission bearing broke. I forget what
happened the next year, maybe a crash? Then the race organizers banned
turbines. I don't
Yeah Columbus, threres nothing to the west but more ocean. Everybody knows
that...
Curt
Sent from Yahoo Mail on Android
From:"G Mann via Mercedes"
Date:Sat, Sep 12, 2015 at 2:07 AM
Subject:Re: [MBZ] Turbines for power and heat [was Re: The demise pf Pruis
h*ters]
Problem set you need
Problem set you need to consider:
1. Turbine engines do not "idle".. what you would equate to "idle" would be
70% RPM. Below that, the burner flame front and balance of air flow through
the engine becomes unstable. Operational power for small turbines comes on
in the 100,000 RPM range which transl
On Fri, 11 Sep 2015 19:38:48 -0700
Jim Cathey via Mercedes wrote:
> > What kind of turbine would one use?
>
> One that doesn't exist yet!
>
> > Any idea where to buy one?
>
> In the future, I hope.
>
> > Turbine engine may make sense on paper, but in reality, there is no
> > cheap
> > turbin
What kind of turbine would one use?
One that doesn't exist yet!
Any idea where to buy one?
In the future, I hope.
Turbine engine may make sense on paper, but in reality, there is no
cheap
turbine engine.
They're not cheap, so we don't sell a lot of them. We don't sell
a lot of them, so
'63 Chrysler.
Wilton
- Original Message -
From: "archer75--- via Mercedes"
To: "Mercedes Discussion List"
Cc:
Sent: Friday, September 11, 2015 6:23 PM
Subject: Re: [MBZ] Turbines for power and heat [was Re: The demise pf Pruis
h*ters]
Chryslers
gt; From: G Mann via Mercedes
> To: Mercedes Discussion List
> Cc: G Mann
> Sent: Friday, September 11, 2015 12:56 PM
> Subject: Re: [MBZ] Turbines for power and heat [was Re: The demise pf
> Pruis h*ters]
>
> So sorry to bring rain to the parade..
>
> Reality is li
Grant wrote:
> Go Green, Be Clean as long as it's easy..
Too true!!
mao
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercede
Grant wrote:
> Materials needed to withstand both temperature and speed of rotational
> components are expensive.
Address the story heard recently that GE has created a 3D printed turbine.
Thanks.
mao
___
http://www.okiebenz.com
To search list archives http://
Chryslers Turbine Cars of the '70s
".There were numerous functional challenges and limitations with the
Turbine Cars, of which sluggish throttle response was the biggest. This is an
inherent design limitation of turbines, as they need to spin up to over 40,000
rpm to develop full power. Th
I suspect he’s talking about the legacy Listers, not modern day ones.
The “originals” Listers were practically machined out of a solid block of
steel. You couldn’t kill them. 20,000 hours was not unheard of without any
service other than basic maintenance.
I used to work for a guy years ago w
puter
controlled, think of all the stuff the computer does in a Prius anyway...
-Curt
From: G Mann via Mercedes
To: Mercedes Discussion List
Cc: G Mann
Sent: Friday, September 11, 2015 12:56 PM
Subject: Re: [MBZ] Turbines for power and heat [was Re: The demise pf Pruis
h*ters]
So
On 11/09/2015 3:55 PM, Dan Penoff via Mercedes wrote:
On Sep 11, 2015, at 4:44 PM, Curt Raymond via Mercedes
wrote:
I've read about people making power with a Lister clone and using the waste
heat in the house. Apparently its possible to find significant savings there.
Lister engines are sup
On 11/09/2015 3:44 PM, Curt Raymond via Mercedes wrote:
I've read about people making power with a Lister clone and using the waste
heat in the house. Apparently its possible to find significant savings there.
Lister engines are super cool too...
-Curt
A lot of effort and trouble.
I particip
This reminds me that Kohler was doing something not long after I had
left with "capstone" turbines. Not sure of the significance, but I
do recall the term being used.
I know they would have been relatively small units, if I recall in
the 10kW-15kW range.
They were talking at one time about
> On Sep 11, 2015, at 4:44 PM, Curt Raymond via Mercedes
> wrote:
>
> I've read about people making power with a Lister clone and using the waste
> heat in the house. Apparently its possible to find significant savings there.
> Lister engines are super cool too...
> -Curt
>
And super heavy,
er 11, 2015 3:41 PM
Subject: Re: [MBZ] Turbines for power and heat [was Re: The demise pf Pruis
h*ters]
This reminds me that Kohler was doing something not long after I had left with
“capstone” turbines. Not sure of the significance, but I do recall the term
being used.
I know they would
This reminds me that Kohler was doing something not long after I had left with
“capstone” turbines. Not sure of the significance, but I do recall the term
being used.
I know they would have been relatively small units, if I recall in the
10kW-15kW range.
They were talking at one time about pr
> G wrote:
>
> Turbine engine may make sense on paper, but in reality,
> there is no cheap turbine engine.
Yet. I can dream. If Andrew can dream of a only-solar
powered, I can dream of a practical, small turbine.
> my experience tells me the application is not practical for
> automotive use..
On Fri, 11 Sep 2015 09:56:52 -0700 G Mann via Mercedes
wrote:
So sorry to bring rain to the parade..
Reality is like that. The internal combustion engine is noisy, stinks,
pollutes, and it's inefficient. However, to date, there is no practical
replacement for use in motorcars.
I'm not
I used to be assigned to USS LEWIS B. PULLER (FFG 23) which used two gas
turbine engines for main propulsion. LM-2500 engines I think, same basic
design as used in a DC-9 from foggy memory. 20,000 shaft horse power from
each engine. Under normal operations, the Engineering Section began for
getti
On Fri, 11 Sep 2015 09:56:52 -0700 G Mann via Mercedes
wrote:
> So sorry to bring rain to the parade..
>
> Reality is like that. The internal combustion engine is noisy, stinks,
> pollutes, and it's inefficient. However, to date, there is no practical
> replacement for use in motorcars.
I'm n
As someone who was involved in research involving micro turbines for
distributed power, I can fully agree with what Grant is saying.
Back in my Kohler days we looked closely at small gas turbines for power
generation, and so many of the requirements were beyond the scope of realistic
(economic
So sorry to bring rain to the parade..
Reality is like that. The internal combustion engine is noisy, stinks,
pollutes, and it's inefficient. However, to date, there is no practical
replacement for use in motorcars.
The theory can be raised that mankind is inherently lazy. Horses, for
example,
Turbine engine may make sense on paper, but in reality, there is no cheap
turbine engine.
Having several decades of experience in the manufacture, sale, and use of
turbine engines, including APU [aux power unit] systems, my experience
tells me the application is not practical for automotive use..
Turbine engine may make sense on paper, but in reality, there is no cheap
turbine engine.
Having several decades of experience in the manufacture, sale, and use of
turbine engines, including APU [aux power unit] systems, my experience
tells me the application is not practical for automotive use..
42 matches
Mail list logo