it very much.
Thanks
Angel Ramos
Arecibo, Puerto Rico
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow
the directions.
to
have the lens back in my hands.
Angel Ramos
Angel Ramos wrote:
Well mine has bite the dust, at least while its been fixed by Pentax It
does not go below 20mm focal length. I noticed it after using it at an
outdoor photo shoot. I was going to use the lens in the studio when I
found
Larry,
The roses look great and that 50mm macro is a sweet lens. Thank you,
John and Godfrey for the meet, realy enjoyed it. I will see what I plan
for this weekend.
Angel
Larry Colen wrote:
On Sunday, John took Angel and I to a rose garden in San Jose, I
finally had a chance to do a
Good news!
I got a confirmation email from Pentax. The lens will be fixed under
warranty as I expected. It seems there was a defect on it. I will
update when I receive it with information on what was the real problem.
Angel
Angel Ramos wrote:
Hopefully, you know Murphy's Law is always
.. If I'm free it would be fun to
get together.
Godfrey - www.gdgphoto.com
On May 1, 2009, at 12:12 PM, Angel Ramos kp...@prtc.net wrote:
I have to travel next May 9th,, I will be there until May 22 if the
trip is not canceled. For you guys in that area of California, Is
there any local
in a really need from one, I will have
to rent one.
Angel
Charles Robinson wrote:
On Apr 30, 2009, at 7:36, Angel Ramos wrote:
Well mine has bite the dust, at least while its been fixed by Pentax It
does not go below 20mm focal length. I noticed it after using it at an
outdoor photo shoot
Hopefully, you know Murphy's Law is always around. I have a trip to
San Francisco,CA on May 9th, if it is not canceled by Personnel. I was
planning to use it there.
-Angel
Luiz Felipe wrote:
Hope it gets fixed soon, Angel.
LF
Angel Ramos escreveu:
Well mine has bite the dust, at least
I have to travel next May 9th,, I will be there until May 22 if the trip
is not canceled. For you guys in that area of California, Is there any
local situations around that I should take care off or know before hand?
Specially the H1N1 Flu virus? While this will be a main work related
Well mine has bite the dust, at least while its been fixed by Pentax It
does not go below 20mm focal length. I noticed it after using it at an
outdoor photo shoot. I was going to use the lens in the studio when I
found the problem. I could hear a rattle inside like coming from a
bearing, a
regards
Angel Ramos
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow
the directions.
confirmations while reconfiguring
other hardware. As it is set up now, the screen detects the DVI signal
just fine.
Jostein
2009/3/4 Angel Ramos kp...@prtc.net:
Hi Doug,
I also have one, it is a great flat monitor, calibrated will provide
excellent results as Jostein says. I use the digital connection
on, it
will not detect the signal from the Graphics card if I turn it on again
no matter if you have it set up for the digital signal or to scan for
any available signal input, I do not know why.
Regards
Angel Ramos
Arecibo, Puerto Rico
Doug Franklin wrote:
Does anyone on the list have experience
I emailed Roberto on March last year in response to Stan Halpin's
request who asked me if I still had his email. I emailed him and
responded he was doing great at that time. He looks at the posts from
time to time but he is not subscribed anymore.
Regards. Angel
Bob Sullivan wrote:
with this in the past, but EDR will be a plus in this regard.
Paul
-- Original message --
From: Angel Ramos [EMAIL PROTECTED]
Sorry. Should say:
. . . use the camera in normal mode?
Angel
Angel Ramos wrote:
Paul,
If you were doing or work in weddings would
Paul,
If you were doing or work in weddings would you use this function or you
would use the camera in nomal mode?
Angel
[EMAIL PROTECTED] wrote:
It's active for RAW files. You can select it in the ISO function screen. It
limits the range of choices, eliminating ISO 100 and ISO6399. This
Sorry. Should say:
. . . use the camera in normal mode?
Angel
Angel Ramos wrote:
Paul,
If you were doing or work in weddings would you use this function or you
would use the camera in nomal mode?
Angel
[EMAIL PROTECTED] wrote:
It's active for RAW files. You can select it in the ISO
please email me direct to [EMAIL PROTECTED] or [EMAIL PROTECTED]
Angel Ramos
Arecibo, Puerto Rico
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow
the directions.
pictures if requested, just give me some time for that.
Angel Ramos
Arecibo, Puerto Rico
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow
the directions.
received them and have been sold out. I do not
know why Adorama did not got the lens.
Angel Ramos
Stan Halpin wrote:
A few months ago (February 28, 2007 to be precise) I ordered two DA*
lenses from Adorama. I won't recap the whole on-again off-again
business of when Pentax would actually really
This is becoming nonsense. What will be next?
Angel
cbwaters wrote:
http://www.amazon.com/gp/offer-listing/B0002YE65Y/sr=8-1/qid=1188215460/ref=olp_tab_used/002-6279431-0856855?ie=UTF8coliid=qid=1188215460sr=8-1seller=colid=condition=used
A used lens for more than a thousand dollars more
I think this went a little high. I saw another one going for 360, but
$567? What do you think and anyone using it with the K10D, any comments?
Angel Ramos
Arecibo, Puerto Rico
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
Forgot the link!
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=280144935503ssPageName=ADME:B:WNA:US:12
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=280144935503ssPageName=ADME:B:WNA:US:12
or
http://tinyurl.com/2t8r9b
Angel Ramos wrote:
I think this went a little high. I saw another one
will call them tomorrow.
Angel Ramos
Still waiting for my 16-50 DA*, oh, well!
Mark Roberts wrote:
From the weekend's hikes on Grandfather Mountain. Mostly in horrible
mid-day light but they'll still give you some idea of what the place
looks like :) Quite a few also show off the minimum
I placed my order on March 21, 2007 to Adorama, still waiting. If any
of you who placed it to the same place have received it, let me know.
I want to be sure how they handle the backlog. I ask because I was told
by one sales person that my order was to be sent by Monday last week. I
to the shop and they replaced the defective
gas pump. This pump was installed inside the gas tank, but still it
was affected by temperature.
Regards
Angel Ramos
Bob Shell wrote:
I hope no one minds me asking this here, but I got more help here
last time than on the car lists.
Volvo 940
files) in case this happens again! I will backup to 2 external
HD and burn DVDs with the keepers raw images. I think Vista is not
stable enough yet.
Angel Ramos
Arecibo, Puerto Rico
Scott Loveless wrote:
Mark Roberts wrote:
Scott Loveless wrote:
Last night the laptop shot
Congratulations Godfrey!!
Angel
Godfrey DiGiorgi wrote:
Friends,
I discovered that my submission had been juried into this exhibition
and been given an award just yesterday evening. There's not yet been
time to update my website to include the photo that will be hanging.
Since time is
I contacted the seller and he had another which he listed on ebay after
emailing him. I sugest you email the seller and ask if he still have
some available. I am waiting for mine, I placed my order after he
listed on 04/10/2007 he shipped it on 04/11/2007. I am waiting for it.
Angel Ramos
if
they support the AF540 with the same configuration. I have not tested
myself how it works but I will wait for their answer and post it here.
Angel Ramos
Arecibo, Puerto Rico
Bruce Dayton wrote:
Even though I already have monolights, I am interested a bit in what
you have done. Namely the AF
kept some chemical production facilities and products but
everything else was dismembered and sold in pieces. They actually
overpaid for the acquisition which was look with regret by some
corporation analysts.
Regards
Angel Ramos
Arecibo Puerto Rico
Scott Loveless wrote:
On 2/8/07, Adam Maas
are clean and spotless as well as the body.
One never stops getting into additional glass and body weight, oh well .
. . ;-)
Angel Ramos
Arecibo, Puerto Rico
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
Ok, I will then stay with the alkalines in the body. I do use the
medium format for big enlargements some of my customers requests. While
I have a K10D, for anything bigger than 16x20, I will use the 645. I
used to have a 6cm x 6cm format camera, but I sold it.
Thanks
Angel
--
PDML
://www.macworld.com/news/2007/01/28/lightroom/index.php
Angel Ramos
Arecibo, Puerto Rico
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
I forgot to mention that the new Camera Raw 3.7 will be available by
February 28 and will support the K10D PEF files.
Angel
Angel Ramos wrote:
News about the sale and shipping date at this link! You can place a
pre-order at a lower price!
Asking price $199 (until April 30,2007) then will go
much ... My order is in already. :-)
G
On Jan 29, 2007, at 6:44 AM, Mike Hamilton wrote:
Hey, they've now included a clone tool and healing brush! Very nice.
Mike
On 1/29/07, Angel Ramos [EMAIL PROTECTED] wrote:
News about the sale and shipping date at this link! You can place
The best way is to open an account just for paypal. Do not use your
personal account for anything related to paypal. If something like that
happens then there will be no money in the account and you can go ahead
and try to fix the problem with paypal, meanwhile your real account is ok.
Angel
Godrey,
What type of screen you had made for the DS? You may have already
discussed it but I lost track of that email. I did check the Katz Eye
site and it looks to be a good option for screens not offered by Pentax.
Angel
Godfrey DiGiorgi wrote:
On Jan 14, 2007, at 7:23 PM, K.Takeshita
formats.
CompactFlash Type I II
MicroDrive, Seagate ST1 5GB Drive
Secure Digital, Multi Media Card
Memory Stick, Memory Stick Pro
SanDisk Memory Stick, MS Pro
xD Picture Card
I am asking $150 plus shipping.
Angel Ramos
Arecibo, Puerto Rico
http://www.compactdrive.com/product_info.php?products_id
Paul,
What are you using to fire the monolights? A hot shoe to pc attachment?
Angel Ramos
Arecibo, Puerto Rico
Paul Stenquist wrote:
Hi Mark,
Yes, I'm using one of the :-))
Seriously, I'm using a pair of Studio Pro Excalibur monolights,
firing into umbrellas. Easy to light. I already knew
Tks Paul!
Angel
Paul Stenquist wrote:
Yes, I have a pc adapter that fits in the hot shoe. Promaster makes one
that sells for less than twenty dollars. Works great.
Paul
On Dec 5, 2006, at 7:11 AM, Angel Ramos wrote:
Paul,
What are you using to fire the monolights? A hot shoe to pc
Hi all,
I just got an email from Adorama; the grip I ordered with my K10D which
was in back order has been shipped. I may receive it tomorrow Friday or
on Monday. It may be that they have it in stock.
Angel Ramos
Arecibo, Puerto Rico
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http
I normally put all small stuff that are shipped with the camera which
are not going to be used except on a special occasion inside the Camera
( or whatever it is) box it came in. I keep all boxes in safe place.
Angel Ramos
Arecibo, Puerto Rico
Perry Pellechia wrote:
As luck would have it all
Yes, I can confirm that something of some mass moves inside the body
when you switch it from horizontal to vertical. But no problems so far,
so I imagine is a normal part of the system.
Angel Ramos
Arecibo, Puerto Rico
Brendan MacRae wrote:
Does anyone else have some internal shifting about
hear is the noise reduction system at works. Just feel the sound
increasing when you move the camera around while the picture is been taken.
Angel Ramos
Arecibo, Puerto Rico
David Bliss wrote:
My K10D is making a horrible raspy/staticy noise whenever the shutter is
open. It's very quiet, I
Ramos
Bob W wrote:
normal. What
you hear is the noise reduction system at works. Just feel the
sound
Can anybody else spot the flaw in this theory?...
--
Bob
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Angel Ramos
Sent: 26
Hi Kevin,
I tried when I got it some years ago, it does not work for IR. I then
used my PZ1-p and worked fine.
Regards
Angel Ramos
Arecibo, Puerto Rico
Kevin Waterson wrote:
Does anybody know If High Speed Infrared Emulsion film can be used
with the MZ-S?
Does the internal infrared mechanism
LOL, I have one!
Angel Ramos
Arecibo Puerto Rico
David Savage wrote:
Needs a cat.
Dave
On 11/25/06, Mark Roberts [EMAIL PROTECTED] wrote:
How about not only hijacking a thread but combining several topics into
it at the same time?
Here's my attempt:
http://www.robertstech.com/temp
William,
I have used my PZ1-p without a problem, and it has a plastic window. I
never had a problem with it!
Regards
Angel Ramos
Arecibo, Puerto Rico
William Robb wrote:
- Original Message -
From: Kevin Waterson
Subject: Re: MZ-S and HSIE film
Thankfully I always carry
Keith,
Do a copy paste to the whole line. The problem is that the actual link
ius missing a part, you can also click the link and copy-paste the part
missing from the linl ( the not colores undelined section of the
complete line).
Angel Ramos
Arecibo, Puerto Rico
keith_w wrote:
Shel
Simon,
That is very high quality work! Congratulations.
Angel Ramos
Simon King wrote:
# Warning #
Some images are not office friendly. Images within the gallery contain;
* Full nudity
* Death
* Obscene language
* Vulgarity
* A dog
...but all in the best possible taste.
http
by Friday.
Craving to have my hands on it!
Angel Ramos
Arecibo, Puerto Rico
--
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
Ok Ann, no problem! It could be they use strong filtering, but I do have
another account. I will email you from that one so you have my other
personal email account. BTW that other one will not accept the mailing
list, go figure.
regards
Angel
ann sanfedele wrote:
Hi Angel -
thanks for your
dollars for this in excellent condition.
Make a good offer.
Shipping to be paid by buyer, we can discuss the way for sending the
payment, and the shipping carrier.
Regards to All
Angel Ramos
Arecibo, Puerto Rico
for this in excellent condition.
Make a good offer.
Shipping to be paid by buyer, we can discuss the way for sending the
payment, and the shipping carrier.
If they do not get sold, I will list them at Ebay.
Good eyes to all!
Angel Ramos
Arecibo, Puerto Rico
YES!
Angel
Arecibo, Puerto Rico
Doug Brewer wrote:
Absolutely. Get back to work.
On Oct 8, 2005, at 2:34 PM, Adelheid v. K. wrote:
Hi folks,
Jostein is right now putting an awful lot of work into the new PUG.
After this thread about PUG i wonder whether this is still wanted.
Please
Angel Ramos discombobulated, unleashed
He has become a Pentaxian saint now, after this major enablement. Wait
and see until he get this Major Glass Beast. Hmm, which makes me think
that he will look for the FA * 600 ( if he does not have it yet!) for
pairing it with two nice bodies
it was stored can not be
read, etc etc.
Hope you can get the data back.
Angel Ramos
Arecibo, Puerto Rico
Paul Stenquist wrote:
I looked into having the data retrieved from my failed Western Digital
drive. $3500 was the best price I could find. Of course I didn't do it.
Paul
On Jul 27, 2005, at 7:02 PM
.
You can also do this as your first approach, but with the detergent you
will be sure you had killed all the living ones.
Cheers,
Angel Ramos KP4TE
From Tropical
Arecibo, Puerto Rico
Chad wrote:
Damn Rob, I can't have any fun. :) The Pelican cases are waterproof,
and insecticide is mostly
and
kind of a pink color when necessary. The one I can send you is black
and white only but very good printed. Give me your address and I will
mail it today.
Angel Ramos KP4TE
From Tropical
Arecibo, Puerto Rico
Kostas Kavoussanakis wrote:
Yes, I know I can get a PDF from pentaxusa.com
Hi Bill,
Yes, I am, but not electric. I live in Puerto Rico and the wind, where
we fly, averages about 15 to 20 knots. It would be more expensive to
fly an electric due to the power needed to fly with that wind.
Have fun flying and photographing your models.
Angel Ramos
Arecibo, Puerto
Hi,
Do any of the *ist D camera owners using the CF+ Type II Plus 2.2
Magicstor microdrive?
I just want to check for compatibility. I got one for testing and
sometimes it rejects to write. It seems that there is a electrical
contact problem. If I take the card in and out it will write some
Hi Amita,
I have tested with 2 flashes ,the 500FTZ and the dedicated 360FGZ.
While I prefer the last one, if I have a wedding to work, I would use
the 500! Why?, you can use external battery power with it. I use a
Quatum battery with dedicated cable. You can 't with the 360FG, you are
Hi:
Does any one here has any comments or information on the capabilities
for this scanner as a film scanner?
regards
Angel
Arecibo, Puerto Rico
, more or less depending what effect you want.
Bute test test test! Have fun!
Angel Ramos
Arecibo, Puerto Rico
Artur Ledchowski wrote:
Hi,
Recently I decided to make use of my AF500FTZ as a studio flash. I want to
take a few shots of my wife. I plan to set up the lighting as following
can be observed later, when you find some problems on your eyesight. Be
very cautious.
Good Luck
Angel Ramos
Arecibo, Puerto Rico
Yes, 15 minutes away from the Arecibo Radio Telescope!
J. C. O'Connell wrote:
1. it was sunrise, not mid day.
sun isnt as bright then. Sun was
a deep orange color
Hi:
I do have one each:
ME ( My first one bought on 1977 maybe)
Super A
Pz1p
MZ-s
Maybe not slr :
Yashica Electro rangefinder
And 2 medium format no Pentax Brand.
I do weddings so my minimum will be 2 each of everything.
Angel Ramos
Arecibo, Puerto Rico
ukasz Kacperczyk wrote:
Hi all
Thanks Brendan, I will try to visit at least on of the stores, my time
will be very limited, but hope to get some to check arround and see if I
get something. I am also looking for some Lumedyne used equipment.
Angel
[EMAIL PROTECTED] wrote:
Angel,
In the City, there's Adolph Gasser on
time in the evenings, but not sure yet!
Thanks
Angel Ramos
Arecibo, Puerto Rico
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .
very happy about the camera, 3 to 4 weeks later after I send it.
You can send Simone information that know everything should be in the
customs hands.
Angel Ramos
Arecibo, Puerto Rico
Jim Jackie Meeks wrote:
This is a question for the Italian pdml'ers or anyone with similar
experience. I
Hi :
I have a Dunco, and it has an on/off switch in the step down
transformer, ( the bulb is a 11.5 volts, cool light one) which in my
unit goes after the timer. You can have the timer working and the
enlarger off. The timer came with the enlarger.
Talking about timers, I build a Heathkit
Ebay accept plain text or HTML in the list auction page. You can then
link your HTML into your web site by taging the back ground and other
stuff you may want, I think. In my opinion a complete waste of server
space, time and bandwidth.
I think a well edited description and correct
Thanks Gianfranco, another question, the film you mention is not longer
available? Did you ever tried any other infrared film?
Angel
Arecibo, Puerto Rico
Gianfranco Irlanda wrote:
Angel Ramos [EMAIL PROTECTED] wrote:
Did any of you tested one of these bodies with Kodak Infrared
film?
I
Gianfranco, and the others guys! , thanks for the information, I will
check my local provider related to the EI. My actual problem: if you
can call it that way, I think all people here will say go out and buy
an older body and you will see! Well, you know, that will make my boss
here (
Bruce:
Think of the smartmedia as an electronic floppy disk. The actual
electronic controller for the smartmedia format in the camera is limited
to only work with 2MB cards. Think of it like an old 720k floppy (3.5
inch) reader. While you can stick a 1.4 MB floppy into it you will not
be
Congratulations Steve!
Good DXing!
Angel
KP4TE
Steven Brendemuehl wrote:
My new call sign is kc8tpr
Steve
---
[This E-mail scanned for viruses by Declude Virus]
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions.
I bought a month ago from Adorama a new FA 50 f1.4 lens, and I got
surprised to get it with the plastic cheapo push on back cap. I promply
replaced it with one of my ( backup) real FA back caps. hmmm, strange
is that I bought an FA 135mm f2.8 almost 2 years ago and had the real FA
rear
hazard due to shorcircuits. If you want
more information email me off list.
Angel Ramos
Arecibo Puerto Rico
João Moreira wrote:
Gentlemen
There´s been a long time since my last email, but I´ve
been watching the digest from time to time, and I´ve
noticed that the list is getting bigger all
hazard due to shortcircuits. If you want
more information email me off list.
Angel Ramos
Arecibo Puerto Rico
João Moreira wrote:
Gentlemen
There´s been a long time since my last email, but I´ve
been watching the digest from time to time, and I´ve
noticed that the list is getting bigger all
Hi Gang!
I live in Arecibo, Puerto Rico, my home is 2 miles from the sea shore.
This is how I decided to get rid of the fungii problem
I had a couple years ago with a 50mm lens, that went to Pentax
heaven. The humidity here ( been an island) is a constant
from 75 % to 100% RH. As David
Just beware, do not give your CC number at first request for it! After
you ask for the body price and anything you want to add, ask for how
they will ship and how much it will be! The catch here could be that
you will be overly charge for shipping, cancelling any saving you made
in the MZ-S
Aln:
How can you get the Motor A open? I have to tight up the vertical fire
button, it is loose on my unit and have tried to find how to open the
thing to fix it!
Angel
Arecibo, Puerto Rico
Alan Chan wrote:
I got a nice working motor drive A at local store
really cheap. My question is
Thanks very much Alan!
If I encounter any gremlings I will sure ask you back!
Angel
Arecibo, Puerto Rico
Alan Chan wrote:
How can you get the Motor A open? I have to tight up the vertical fire
button, it is loose on my unit and have tried to find how to open the
thing to fix it!
Too bad
Congratullations Collin! My email address says it all KP4TE, extra,
been a ham for 26 years!
Angel
Collin Brendemuehl wrote:
I passed my Tech test today.
Now just gotta wait for the paperwork.
Who are the rest of US, the true bubbahood?
Post your call signs, please.
Thanks,
Collin
in the engines of radio controlled airplanes) fail. And guess
what, they call me complaining I do have a flame but no signal. I
always ask, how they lit the flame, and 99 % of the time they say they
used a lab burner lighter to get it on. I do not make more questions, I
go onsite ! :-(
Angel
snail
mail, but too expensive for UPS. Does anyone has a one of this covers
that can sell?
Thanks
Angel Ramos
Arecibo, Puerto Rico
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users
85 matches
Mail list logo
