Personally I find it not worthwhile. Why risk damaging your printer by using
off brand ink or cartridges? I did it once and it leaked all over the inside
of my printer!
Richard, N7TGB
-Original Message-
From: Chuck Kelsey [mailto:[EMAIL PROTECTED]
Sent: Monday, November 24, 2003 6:27 PM
Heheh... Once in a while I tell them what I'm looking for just so I can see
that priceless blank look! Actually one of then knew what silicon heat sink
compound was - I couldn't find it, and it turned out that they were out, but
another store nearby had it.
Richard, N7TGB
-Original Message
I use the blade type fuse holders and solder them in. I experience much less
voltage drop across them, resulting in more power out of the radio.
Richard, N7TGB
-Original Message-
From: Rod Lane [mailto:[EMAIL PROTECTED]
Sent: Wednesday, January 07, 2004 10:07 PM
To: Repeater-Builder
.
One possible route would be to use one of the ID'rs to start the DVR, but
that could quickly become a pain unless you triggered it from the initial
ID. Then it would run the DVR only when the repeater ID's when it has been
idle for longer than ten minutes.
Hope this helps.
Richard, N7TGB
-Original Message-
From: dy3lmk143_13mhz [mailto:[EMAIL PROTECTED]
Sent: Sunday, March 28, 2004 5:39 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] UHF link
I've never had experience on UHF. any experience how far would a 50
watts UHF link (440 MHz) can get?
only seven watts!
Richard, N7TGB
-Original Message-
From: dy3lmk143_13mhz [mailto:[EMAIL PROTECTED]
Sent: Sunday, March 28, 2004 5:39 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] UHF link
I've never had experience on UHF. any experience how far would a 50
watts UHF
I do. I'll sent it to you off list, because it's pretty large.
I can submit it for posting on the repeater-builder site; who can I send it
to?
Richard, N7TGB
-Original Message-
From: Q [mailto:[EMAIL PROTECTED]
Sent: Saturday, April 10, 2004 9:43 AM
To: Repeater-Builder@yahoogroups.com
You just call 'em sir...
Richard
-Original Message-
From: Steve S. Bosshard (NU5D) [mailto:[EMAIL PROTECTED]
Sent: Thursday, April 29, 2004 7:00 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Re: Mast Materials
I wouldn't want to mess with someone who goes
of business
account with them that allows that sort of thing.
Repeaters are mainly for voice communication.
Hope
this helps.
Richard, N7TGB
-Original Message-From: hello wellcom
[mailto:[EMAIL PROTECTED]Sent: Friday, May 07, 2004 7:46
AMTo: Repeater-Builder@yahoogroups.comSubject
I had to jump in with a quick comment: I'm a democrat too...
Terrorism has nothing to do with political party affiliation, but has
everything to do with our very survival.
Richard, N7TGB
-Original Message-
From: JOHN MACKEY [mailto:[EMAIL PROTECTED]
Sent: Friday, May 14, 2004 12:04 AM
You're right, this probably isn't the right venue, but it is something that
affects each and every American.
Richard
-Original Message-
From: Ken Arck [mailto:[EMAIL PROTECTED]
Sent: Friday, May 14, 2004 6:07 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re
This has been circulating on the internet for many years.
Richard, N7TGB
-Original Message-
From: Neil McKie [mailto:[EMAIL PROTECTED]
Sent: Friday, June 04, 2004 6:39 AM
To: Repeater Builder
Subject: [Repeater-Builder] Re: [Tower-pro] Tech Tip of the Day
... swipped from Tower-pro
Radio Shack sells it.
Richard, N7TGB
-Original Message-
From: Mike WA6ILQ [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 02, 2004 12:07 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Astron Supply Help
At 08:40 AM 9/2/04, Tedd Doda, VE3TJD wrote
I'm sure you'll get plenty of volunteers to help empty 'em!
Richard, N7TGB
-Original Message-
From: dave_g7uzn [mailto:[EMAIL PROTECTED]
Sent: Saturday, September 11, 2004 2:19 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Cavity filters from aluminium beer
Awww... you took all the fun out of it - I was going to try it and see if it
works!
Richard ,N7TGB
-Original Message-
From: NØATH [mailto:[EMAIL PROTECTED]
Sent: Thursday, November 18, 2004 12:58 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] radial tire
Another way is to use Windows picture and fax viewer (available in XP),
select all of the JPGs for printing, then send 'em to the pdf driver. That's
what I use.
Richard, N7TGB
-Original Message-From: TGundo 2003
[mailto:[EMAIL PROTECTED]Sent: Saturday, November 20, 2004 3
And WHAT does this contribute to the list??
Richard
-Original Message-
From: Buley, Kenneth L (GE Consumer Industrial)
[mailto:[EMAIL PROTECTED]
Sent: Saturday, December 18, 2004 9:40 AM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder]
Don't know... I just roll my eyes and go to the next message. Or if I see a
whole bunch with the same subject, I just skip 'em all. I've been doing that
a lot recently... grin
Richard, N7TGB
-Original Message-
From: Buley, Kenneth L (GE Consumer Industrial)
[mailto:[EMAIL PROTECTED
of it.
If you want, I can provide you with more assistance and some examples of
macro files that I have written.
Richard, N7TGB
-Original Message-
From: wa9ba [mailto:[EMAIL PROTECTED]
Sent: Saturday, December 25, 2004 10:14 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater
to
program it because it was too complicated!
Since my file is fairly small, I just make changes to it and resend it the
next time I'm at the site. The relatively small size of my file makes it
easy to keep a complete copy on my laptop.
Richard, N7TGB
-Original Message-
From: Steve
I've been doing some research into 3-mode battery chargers and the Ibex
units seem to fit the bill for my application. Using your link, I checked
their web site but they state they will not sell to individuals. Is this
true and is there a way around this?
Richard, N7TGB
-Original Message
. It is unlikely though, as they
are pretty bullet proof.
Richard, N7TGB
-Original Message-
From: va3vkk [mailto:[EMAIL PROTECTED]
Sent: Sunday, March 13, 2005 10:28 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] RC 1000 Controller
When I program a function
I've
got a .pdf copy of it. Let me know if you want it.
Richard, N7TGB
-Original Message-From: Doug Zastrow
[mailto:[EMAIL PROTECTED]Sent: Sunday, March 27, 2005 5:22
AMTo: repeater-builder@yahoogroups.comSubject:
[Repeater-Builder] IFR FM/AM-1200S Service Monitor
sided). I got it in the
mail a few days later and spent about twenty minutes reordering the
pages.
http://www.n7tgb.net/pages/radio/radio_resource.htm
Richard, N7TGB
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]Sent: Sunday, March 27, 2005 7:54
AMTo
That's what you get for hiring a plumber to install it! grin
Richard, N7TGB
-Original Message-
From: Brent [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 29, 2005 9:22 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] leak proof connector :)
NOPE he HAD
Several hits on Google if you plug in the model number
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of kg4ogn
Sent: Sunday, April 24, 2005 5:09 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Antenna
Wow. Here in Reno, NV it is $2.49.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of mch
Sent: Thursday, May 19, 2005 1:10 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Dayton check list
KiloHertz is the correct term!
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of DCFluX
Sent: Saturday, May 21, 2005 7:17 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: RE : Re: [Repeater-Builder] Poor Repeater RX
Don't
Heh... Yes, it is interesting to have lived long enough to have seen
changes, but it is also good to go along with those changes instead of
staying firmly mired in the past. As I recall, the cycle-hertz change was
made sometime in the 60s.
Richard, N7TGB
-Original Message-
From
So if you are in the southern hemisphere, does it spin in a counterclockwise
direction? Funny... my wife grew up in tornado country and she never
mentioned that! grin
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Coy Hilton
Actually I was referring to the static on the screen, but I believe you're
right about the direction of spin in the hemispheres. So what does the
static on the TV do during a tornado event?
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED
for the satisfaction of seeing the confusedlooks or to
impress them.
When
Radio Shack stops selling parts, I'll have to mail order
everything.
Richard, N7TGB
-Original Message-From:
Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED]On
Behalf Of Mathew QuaifeSent: Sunday, June 12
Make sure the ports are forwarded to the computer that you are setting up.
Also, you can only have one Echolink node per ip address, so if it is still
running on your w2k computer, try closing that one.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto
!) and came up with these
hits; one of them is about firewalls, the other says the error indicates a
connectivity problem.
http://www.echolinker.com/forums/archive/index.php/t-606.html
and
http://echolinker.com/forums/showthread.php?t=709
Hope they help.
Richard, N7TGB
-Original Message
It was
(is?) the other way around, Radio Shack bought Allied.
Richard, N7TGB
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]On Behalf Of Kenneth
CookSent: Thursday, June 16, 2005 10:11 AMTo:
Repeater-Builder@yahoogroups.comSubject
to happen soon, with all the irons I have in the fire now!
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Coy Hilton
Sent: Thursday, June 16, 2005 4:56 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Email from
You might try this guy; I bought an IFR1200S service manual from him, it was
in almost new condition.
lewis porter [mailto:[EMAIL PROTECTED]
Lew's Resale 3737 West Ferdinand StreetChicago, IL 60624Phone:
773-220-6000After 6PM: 773-638-4987Fax: 773-826-1845
Richard, N7TGB
-Original
I have a .pdf copy of the operating manual for my IFR, and I had it printed
through Kinko's. It cost somewhere in the neighborhood of $20.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Paul Finch
Sent: Wednesday, June 22
Are you sure it isn't something caused by your service monitor? Have you
tried a different one, or is there anything else common to all three radios?
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Paul Kelley
Sent: Saturday
Do you have a link to the article?
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of mch
Sent: Wednesday, July 13, 2005 11:05 PM
To: repeater-builder@yahoogroups.com
Subject: [Repeater-Builder] OT: NC man charged with 'driving
I agree... I read the article on some Ham related web site, and there wasn't
much useful information in it, so it's too bad we can't see the film at
eleven.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Doug W7FDF
Sent
I bought one about six months or so ago, but I don't remember where. Google
should turn something up for you, that's how I found it.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Bruce Nanney
Sent: Sunday, July 17, 2005 4:49
It might be the transmit
time out timer in the Phoenix that is causing it to drop
out.
Richard,
N7TGB
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]On Behalf Of Doug
BlizzardSent: Tuesday, July 26, 2005 5:08 PMTo:
Repeater
Heh...
My ISP's virus filter caught it. No problem here at any rate, if they hadn't
caught it, my antivirus would have.
Richard, N7TGB
-Original Message-From:
Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED]On
Behalf Of Kevin CusterSent: Tuesday, July 26, 2005 6:42
No may (should?) disable the timer; the documentation doesn't
specifically mention it.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Doug Blizzard
Sent: Tuesday, July 26, 2005 6:24 PM
To: Repeater-Builder@yahoogroups.com
Subject
I run Outlook and I like it! THppttt raspberry
grin
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Ken Arck
Sent: Tuesday, July 26, 2005 6:49 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re
it. The service manual says the
timer defaults to one minute.
By the way, when you say you didn't program the CCT, did you leave the field
blank, or did you put No in it?
I use one for packet radio, and all the signals I need are on the rear
connectors. Do you need a pinout?
Richard, N7TGB
need
to solder the wire to the pin, as it won't be reliable otherwise.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Ronny Julian
Sent: Tuesday, July 26, 2005 8:08 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater
and
at least as reliable as a linear supply. If it works for you, then great!
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Andrew
Sent: Saturday, August 06, 2005 10:20 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater
Oh, ummm... isn't that the same as a comma? GRIN
Richard
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Chuck Kelsey
Sent: Tuesday, August 23, 2005 6:59 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] For Sale - OT
http://ftp.fcc.gov/oet/info/maps/canline/linea.html
And
http://ftp.fcc.gov/oet/info/maps/canline/
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of cism211
Sent: Sunday, November 27, 2005 5:04 PM
To: Repeater-Builder
Ok, I'll bite... what does TAS stand for?
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of nj902
Sent: Sunday, November 27, 2005 7:02 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: trying to build my
Heh...
Withemphasis on Non_Profit!
Richard
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]On Behalf Of Mark A.
HolmanSent: Sunday, December 25, 2005 12:29 PMTo:
Repeater-Builder@yahoogroups.comSubject: Re: [Repeater-Builder] Re
it with compressed air. Never cleaned monitor boards
though, I was nervous about getting water in or under the
flyback.
Richard, N7TGB
-Original Message-From:
Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED]On
Behalf Of Fred TownsendSent: Tuesday, January 03, 2006 11:18
AMTo: Repeater
I concur... This is one of the most interesting groups I've had the pleasure
of participating in. Indeed, a rare collection of talent in this group.
Fairly new to the world of repeaters,
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED
I just wonder if the guy was dumb enough to think he wouldn't get caught!
Richard
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Dave VanHorn
Sent: Thursday, January 12, 2006 10:36 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater
Reminds me of those $600 hammers the Government buys!
Richard
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]On Behalf Of
DickSent: Friday, January 13, 2006 8:43 AMTo:
Repeater-Builder@yahoogroups.comSubject: Re: [Repeater-Builder
I can't get to it either.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Jack Davis
Sent: Friday, January 27, 2006 8:33 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Web Site Down?
Is the RB web site
Me too.
Richard
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Dick
Sent: Tuesday, January 31, 2006 5:23 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] mods.dk (possiably OT)
Works for me, Rich.
73,
Dick
If you have an IRLP node you can easily install Echolink on it, and then
they'll both use the same hardware.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Chris
Sent: Thursday, February 09, 2006 7:21 PM
To: Repeater-Builder
There is a version of Echolink (called EchoIRLP) that runs on Linux.
Installed on an IRLP box, EchoIRLP utilizes the same hardware and a few of
IRLP's scripts.
I have both running on my node.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL
Or, as one local Ham advised another, turn up your power, your audio level
is low. The other ham was nearly full quieting into the repeater.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Paul Finch
Sent: Friday, February 17
, the problem has tapered off.
Richard, N7TGB
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]On Behalf Of
N9WYSSent: Saturday, February 18, 2006 8:11 AMTo:
'Kevin Custer'Cc:
Repeater-Builder@yahoogroups.comSubject: [Repeater-Builder
virus making the rounds causing it?
Richard, N7TGB
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED]On Behalf Of
N9WYSSent: Saturday, February 18, 2006 8:48 AMTo:
Repeater-Builder@yahoogroups.comSubject: RE: [Repeater-Builder]
Virus
Abandoning Outlook and Outlook Express is not the answer: having a
topnotchantivirus program and keeping it up to date is. I've used Outlook
for years with no virus problems.
Richard
-Original Message-From:
Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED
Those look like the ones I have on my web site.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of skipp025
Sent: Sunday, March 19, 2006 10:19 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Decibel PDF files
on
the Repeater-Builder site, but I haven't seen them posted there.
The URL to the page featuring the articles we speak of:
http://www.n7tgb.net/pages/radio/radio_resource3.htm
Richard, N7TGB
www.n7tgb.net
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED
At the Hamfest that takes place during our EmCommWest www.emcommwest.org,
admission and space rent is free! It is small compared to the others, but
the price is right.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Paul
EmCommWest and the Hamfest/fleamarket are held here in Reno; this year it
will be May 6 7th. There has been talk of it moving somewhere else after
this year, Las Vegas, perhaps.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf
That thought crossed my mind also, but it still looks like something
somebody built in their garage.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Dan Blasberg
Sent: Saturday, April 01, 2006 8:06 AM
To: Repeater-Builder
that are
basically inaccessable for repairs for 6 months of the year, you
cannot have this kind of thing happen...
Anyone have experiences over the past few years? Particularly the 4
bay open dipole collinear variety of which we almost exclusivly use.
Richard
VA7AA
Those aren't advertisements, they are providing information about the group.
Richard
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Jon Pearl - W4ABC
Sent: Thursday, June 08, 2006 6:16 AM
To: Repeater-Builder@yahoogroups.com
Subject
winmail.dat
My interpretation is that it will be effective 30 days after it is published
in the federal register, so the date hasn't been determined yet.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Dave Schmidt
Sent: Friday
Me too. I just ordered the general study guide.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Dave Schmidt
Sent: Friday, December 15, 2006 10:25 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater
Sure doesn't... this is the type of attitude that keeps people from joining
our hobby.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Steve Bosshard (NU5D)
Sent: Sunday, December 17, 2006 6:45 PM
To: Repeater-Builder
I admit I missed it, so I need new finals...
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Laryn Lohman
Sent: Sunday, December 17, 2006 9:13 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re
In my opinion, they are very good quality power supplies. I am using the
DLS-15 as a four stage charger for my home shack's batteries, and in the
year and a half I've owned it, I have had no problems at all.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
Heh... Same thing I found; Google is your friend. grin
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Mike Pugh
Sent: Tuesday, January 09, 2007 6:57 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater
settled on an IOTA DLS-15 power supply with an IQ4 smart charge controller.
It is connected full time to the (new) batteries, and I only have to add
water every couple of months. I have not noted any kind of noise generated
by the charger. This setup works very well for me.
Richard, N7TGB
That is perfectly understandable Plus, as someone else mentioned, the
switcher will save you money.
Richard, N7TGB
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Mathew Quaife
Sent: Sunday, January 14, 2007 10:22 AM
To: Repeater
30 seconds is way too short. Sounds like someone put up a repeater but wants
to discourage it's use.
Richard, N7TGB
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Thursday, March 08, 2007 11:47 AM
To: Repeater-Builder
My opinion is that a repeater should be used a lot, that way it's known to
be reliable in case of emergency use. Plus, as you say, there'll be people
listening.
Richard, N7TGB
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent
You're right, I remember now. senior moment My apologies!
Richard
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Eric Lemmon
Sent: Thursday, March 08, 2007 7:07 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder]Timeout Timers
I get so tired of people who complain about wasting bandwidth like it's
some precious commodity, such as beer.
Richard, N7TGB
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Don Kupferschmidt
Sent: Sunday, March 25, 2007 7:42 PM
To: Repeater-Builder
I'll drink to that!
Richard, N7TGB
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Don Kupferschmidt
Sent: Sunday, March 25, 2007 8:10 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [SPAM] RE: [Repeater-Builder] Repeater Builder language
Being
,
as that was the only browser that would work (as stated by the FCC).
Richard, N7TGB
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Don Kupferschmidt
Sent: Monday, April 16, 2007 4:41 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Update
Don't you just love it when an opportunity to use a line like that comes
along?
Richard
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Mike Pugh
Sent: Sunday, April 15, 2007 12:56 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder
I did a brief Google search and found several hits. EBay has listings for
the operation manual/service manual on CD-ROM.
Richard, N7TGB
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Paul Finch
Sent: Saturday, April 21, 2007 7:31 PM
To: Repeater-Builder
I've always known it as repair.
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Sunday, July 08, 2007 11:58 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder
I'm probably wrong, but I've always thought it is an Australian term that
has been adopted in this country.
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Sunday, July 08, 2007 12:05
Exactly... We only sort of have that band.
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Kris Kirby
Sent: Sunday, July 29, 2007 5:01 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: Re: [Repeater
Probably someone who is dumb enough to pay $300 for a pair of tubes isn't
going to notice that minor discrepancy. Sheeseh.
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of John J. Riddell
Sent: Monday
I looked through the service manual for the VX-7R on the off chance that it
would have the charger schematic, but there was no mention of it.
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED
Another reason is that the larger company wants the technology that the
smaller company possesses
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Nate Bargmann
Sent: Monday, November 05, 2007 5:47 PM
Somebody already posted this 14 hours ago.
Richard, N7TGB
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Richard Reese
Sent: Tuesday, November 06, 2007 5:53 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Motorola/Yaesu
Received
that you had a possible data corruption in
RAM that was cleared out by rebooting. That is very common with
microprocessor based equipment.
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Eric Lemmon
Sent
I knew it, it's those space aliens!
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Keith McQueen
Sent: Friday, November 09, 2007 7:55 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder
The shelf life is typically ten years.
Richard
http://www.n7tgb.net/ www.n7tgb.net
_
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Mike Morris WA6ILQ
Sent: Sunday, November 11, 2007 12:29 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: Re
Here it is mostly the opposite. People will use a club owned, linked, high
level, wide coverage system before using a low level machine. Of the 2m low
level machines, only one or two see limited use. There are many UHF machines
in the area, but they see almost no use.
Richard
http
1 - 100 of 370 matches
Mail list logo
