If needed you can make a macro that you can put a button to on every sound
panel at the bottom or something. Just click when you want to fade out.
PT c 0, 0 0 fade 5000!
And this will put a 5000 milli second fade (5 seconds) on anything playing
on the current panel.
Many thanks
Geoff Barkman
The only time I ever had crashes is when I overfilled the logs. With a few
hours of spare music. Running rivendell 2.10.3 on ubuntu 14.04.
Many thanks Geoff Barkman
On Fri, Feb 25, 2022, 8:34 AM Rob Landry <41001...@interpring.com> wrote:
>
> It's ancient, but I run it on at least
Hi Tim
Sorry to hear about this. What a way to spend the weeks leading up to
Christmas.
If you were to grab a copy of one the pieces of audio from the /var/and,
and listen to it on another program eg audacity, does it have a physical
wave form that you can see and listen to?
Many thanks
Geoff
a terminal and type.
cat /etc/samba/smb.conf
And hit enter. The relevant lines are usually at the end of that file.
Many thanks
Geoff Barkman
On Wed, Dec 1, 2021, 11:00 AM Jason McMullan
wrote:
> Hi,
>
> I'm on Rivendell 3.6.2, is there information on the default samba
> c
can be used for crossfading
etc.
At my station we used to play the main log out of alternating soundcards...
because thats what we used to do with our old master control system. I
could see that as handy in some stations but it wasn't necessary in ours.
I hope this helps you.
Many thanks
Geoff
I'm not sure about rivendell 3x versions. It works on rivendell 2x versions.
But you can add lines to you /etc/rd.conf file
(Cae)
AudioRoot=/mnt/myalternativelocation
Except use square brackets around the cae section.
Many thanks
Geoff barkman
On Wed, May 19, 2021, 11:36 PM Sojo Gold wrote
Hi Stan
Haven't tried that one... looks good.
Many Thanks
Geoff Barkman
On Tue, May 11, 2021 at 4:01 PM Stan Fotinos wrote:
> Hi Rob
>
> I find that NoMachine is more reliable and performs much better on lower
> bandwidths and If this go wrong you can ssh into the server and restar
.
Even if you just remote in for a short time enough to restart the x11
service etc.
Many thanks
Geoff barkman
On Tue, May 11, 2021, 10:29 AM Rob Landry <41001...@interpring.com> wrote:
>
> I do have a script running to restart x11vnc. If it crashed, the script
> works perfectly. B
if the
spacebar pushes twice.
Many thanks
Geoff Barkman
On Thu, Mar 11, 2021 at 1:07 PM Alan Peterson
wrote:
> Hi all - Running version 3.4.1 on an older Dell dual-core. I have the
> spacebar set up to Play Next when tapped. But when I do, it skips ahead two
> events instead of just one.
>
&
Hi Jesse
This sounds what I'm trying todo. I've got Rivendell running on Ubuntu
14.04 with Rivendell 2.10.3... I tried importing the Database into Ubuntu
18.04 and Rivendell 3.5.
Doing the intermediate step of converting to a machine running Rivendell
2.19 sounds like a great idea. I did find a
Hi there
I've just completed an install Rivendell v3.5.0 on Ubuntu Mate 18.04.
It seems to work well until I use Rddbconfig to import my old Rivendell
2.10.3 db schema 242 into it.
RDDbConfig Error (as superuser)
DB connection re-established
invalid SQL or failed DB connection[unknown column
you
get a warning if you put the seque marker too close to the start of a song.
Perhaps check the audio that played around 10.45pm give or take about 10
mins.
I hope this helps you.
Many Thanks
Geoff Barkman
On Tue, Jan 5, 2021 at 4:48 AM Tom Van Gorkom
wrote:
> Has anyone encountered a prob
Further to this email. The error message I get is.
gnutls_handshake() failed: Handshake failed
I've downloaded the repository key, using the wget command.
Many thanks
Geoff barkman
On Thu, Oct 8, 2020, 8:24 AM Geoff Barkman wrote:
> Hi there.
> I'm not sure who is in charge of the
Hi there.
I'm not sure who is in charge of the Ubuntu/debian backup repository
https://apt.rivendell-fr.org/
But I can't seem to be able to download packages from it.
Any ideas if or where I can get required packages from?
I know its an old version of Rivendell.
Many thanks
Geoff Barkman
?
Just a thought.
Many thanks
Geoff barkman
Just a thought?
On Mon, May 11, 2020, 7:17 AM Jay Schell wrote:
> Where is the config file located?
>
> Sent from my Verizon, Samsung Galaxy smartphone
>
> --
> *From:* rivendell-dev-boun...@lists.
Hi Mark.
What format are you storing your audio files in? Mp2 or pcm wav? A way to
work out is a 3 minute audio file is 30 mb if pcm wav, whereas mp2 is about
4mb. Pcm wavs will fill your hard drive quickly.
Many thanks
Geoff Barkman
On Wed, Nov 27, 2019, 2:00 PM Mark Murdock
wrote:
> OK, n
It might be something like turn off UFI Boot or something?
On Tue, Sep 17, 2019 at 7:09 AM Tom Van Gorkom
wrote:
> Would anyone know if a brand new HP Pavilion 595-p i5 8th gen
> cpu/chipset is compatible with CentOS 7, and if so, how do I get it to boot
> on a liveCD or USB? No matter what
Hi Dennis
I don't think its quite the one I had... I think it is better.
Thank you very much.
Greetings from New Zealand.
Many thanks
Geoff Barkman
On Fri, Aug 23, 2019 at 10:22 PM Dennis Wynes <
den...@carpetcleaningcompany.co.uk> wrote:
> Was it these?
>
> https://www.e
About a year ago I downloaded a version of Rivendell that runs on a
Raspberry Pi.
I have mistakenly misplaced the Image... Does anyone know where I can
download it from? from memory it was quite a large file.
Is there a group people working on it?
Email me off list if you wish.
Many thanks
Geoff
thanks
Geoff Barkman
On Tue, Jun 18, 2019, 2:10 AM Keith Thelen wrote:
> Right now I have two RDAirplay panel buttons, one assigned to a macro cart
> that turns a device on, and another that turns said device off.
>
> Can anyone think of a good way to combine these two functions int
://geofffromdunedin.blogspot.com/2014/08/connecting-to-remote-webstream-with.html
and
http://geofffromdunedin.blogspot.com/2014/08/disconnecting-from-stream.html
Its quite complex and I can explain more if required.
Many Thanks
Geoff Barkman
Dunedin New Zealand
On Mon, Apr 15, 2019 at 3:35 AM Ryan Kin wrote:
> I k
It could be that you are not in the cdrom group on the linux system. Test
this in most linux systems by holding down CTRL and ALT keys and with
another finger type T... once the terminal opens type "groups" and hit
enter.
Or alternatively your rivendell system user could have cdrom user
privileges
Hi there.
I'm pleased that rivendell on Ubuntu is starting again. I'm waiting for a
chance to update our systems.
Many thanks
Geoff Barkman
New Zealand
On Thu, Feb 21, 2019, 11:54 PM le père Léon wrote:
> Le 20/02/2019 à 21:54, Florent Peyraud a écrit :
> > And to begin with, I'
Hi Scott.
You should always make a backup of your database. If it crashes imagine how
long it would take to recreate it.
For best results stop all your rivendell processes. You find after running
rdbcheck your backup file will get smaller.
Many thanks
Geoff Barkman
On Tue, Feb 19, 2019, 12:30 PM
Hi Tim. I'd like to try out your Ubuntu as well.
Thank you for all your work.
Many thanks
Geoff Barkman
On Sat, Jan 5, 2019, 6:29 AM Ken Goods wrote:
> Hi Tim,
> Would be very interested in taking a look. Will be evaluating Rivendell
> over the next couple months and this would be ver
>From memory when I did this about 10 years ago RCS stored all the files
with letters and numbers that look like microsoft serial numbers with a WAV
file extension.
Many Thanks
Geoff Barkman
On Tue, Dec 4, 2018 at 6:38 AM Fred Gleason
wrote:
> On Dec 3, 2018, at 11:24, Jeremy W. Eisen
Hi Rich. I've got it... I'll post it on my website in the next few days.
Will post a link for it.
Many thanks
Geoff Barkman
On Tue, Oct 16, 2018 at 9:53 AM Rich Stivers wrote:
> While searching the [RDD] archives I found a 2012 post referencing a
> 'Hotkeys Java Panel Changer
Hi Patrick
If you have troubles with VNC... there is always teamviewer?
Many thanks
Geoff Barkman
On Fri, Sep 7, 2018 at 6:20 AM Patrick wrote:
> Which VNC server is recommended for Rivendell on CentOS 7?
>
> Thank you.
>
> —
> Patrick
rsions of rivendell
as well.
Does anyone know of any good tutorials?
Many thanks
Geoff Barkman
On Wed, Aug 15, 2018 at 2:12 AM Florent Peyraud wrote:
> Hi
>
> This is great news !
>
> I've set former packages from tryphon up on a new URL :
>
> https://apt.rivendell-fr.org
>
Hi Dave
Just to clarify. This is the RRAbuntu downloaded from Sourceforge?
If it is from sourceforge it is close to 8 years old and uses an old
version of both Ubuntu Linux and Rivendell.
If you have another computer handy does the cd fire up and produce the
desktop and Demonstration of
I'd love to see Typhon carry on. I use it on all my machines. Not going
passed 10.03 is quite frustrating. So many new features. I don't know
enough about fixing up the qt3 problem.
Many thanks
Geoff Barkman
On Thu, Aug 2, 2018, 5:50 AM Jonathan Cohen
wrote:
> I suspected that might hap
Geoff Barkman
On Thu, Aug 2, 2018, 6:16 PM David Henderson
wrote:
> I seem to recall a while back, that someone posted about RDAirplay
> randomly stopping or pausing during playback. I am now experiencing this
> issue, however I recall that the fault was potentially caused by a pendi
te
> and get your stuff copied off to somewhere else.
>
> that's what I think.
>
>
>
>
>
> On 06/24/2018 04:56 PM, Geoff Barkman wrote:
> > Hi there.
> > My rivendell Ubuntu 14.04 system running rivendell 2.10.3. I know it's
> > old.
> >
Hi there.
My rivendell Ubuntu 14.04 system running rivendell 2.10.3. I know it's old.
While playing songs that have been doing the rounds for years in the
playlist has started occasionally glitches while playing music. Sometimes
for a second or two every now and then. Could this be a sign of hard
play them.
Many thanks
Geoff barkman
On Jun 13, 2018 7:32 AM, "Lorne Tyndale" wrote:
A few things to look at:
-For the client, make sure it has a static IP, and be sure you have
added the client in rdadmin --> Hosts
-If you are running a standard onboard (or otherwise) sound card
Hi Seth. Another thing you can try is %a - %t or %f in the meta field a =
artist, t = song title or f = file name.
On May 25, 2018 8:19 AM, "Seth Stevenson" <rcflye...@gmail.com> wrote:
> I think that will work.
>
> On Thu, May 24, 2018, 4:13 PM Geoff Barkman <cou
Hi Seth
I have my drop boxes set up to use the meta information with %i (lower cast
letter I) or %l (lower case letter L). I think that is what you are wanting
to do?
Many thanks
Geoff
On Fri, May 25, 2018 at 7:45 AM, Seth Stevenson wrote:
> Hi,
>
> I am having trouble with
Hi Robert
How big is your mysql database back up file? My backup file got to be about
80mb and kept crashing.
I ran the rddbcheck on it... and became quite stable after that... backup
file shrunk to about 10 mb in size.
Many thanks
Geoff
On Mon, May 21, 2018 at 9:42 PM, Robert Jeffares
I've had similar problems when I had one of my soundcards was faulty.
Perhaps rdairplay points to the faulty sound card?
Many thanks
Geoff barkman
On May 18, 2018 3:56 PM, "Lorne Tyndale" <ltynd...@tyndaleweb.com> wrote:
> Chester,
>
> I've never run into someth
Hi Chris. If you go into rdadmin and the edit hosts. There is an option in
the rdairplay to change the default transition. You'll have to restart the
rdairplay app. To see the changes.
Many thanks
Geoff barkman
On Feb 12, 2018 1:20 PM, "c...@elfpen.com" <c...@elfpen.com>
Well done Tim. I'll have to download and give it a spin.
Many thanks
Geoff Barkman
On 21/10/2017 3:24 am, "Tim Camp" <t...@dotcom1.net> wrote:
> Greetings,
>
> I have uploaded to my website a installable live cd of Rivendell 2.17.0 on
> Lubuntu 14.04LTS for x86-64
>
=192.168.2.105 SR\ 1\ 4\ 1\!
rmlsend --to-host=192.168.2.105 SR\ 1\ 5\ 1\!
rmlsend --to-host=192.168.2.105 SR\ 1\ 6\ 1\!
Many Thanks
Geoff Barkman
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman
I found drop boxes often stop working if the apache time out is wrong. And
if you modify settings in rdadmin if a file is currently being imported.
Many thanks
Geoff
On 5/03/2017 11:25 am, "Hoggins!" wrote:
> Hey there,
>
> Yes, this thread is fairly old, but this just
Windows
> workstations.
>
> Thanks!
>
> -Alan
>
> On 11/25/2016 1:01 PM, Geoff Barkman wrote:
>
> Hi Alan
> How old is the Database? I ran into problems when my system had been
> running 2 or 3 years. I have a cronjob set up to automaticly back up the
> database ev
cro to run daily weekly or whenever.
I hope this helps you automate the process.
Many thanks
Geoff Barkman
On Sat, Nov 26, 2016 at 3:19 AM, Alan Smith <alansm...@flinn.com> wrote:
> Been a while since I've posted to the group.
>
> I currently still only have a single RD
Geoff Barkman
On Sat, Nov 5, 2016 at 8:23 AM, Rob Landry <41001...@interpring.com> wrote:
>
> I'm trying to imagine how this would work.
>
> If someone loads a single ID cut into the dropbox, you want it to delete
> all current ID's from the cart and just import the one
of
support).
Frederick Henderson came up with the fancy scripts to install it.
I'm not a fan of the Ubuntu Unity interface and have looked at Ubuntu Mate
desktop but 14.04 is not an LTS release.
Remastering the Ubuntu Iso image was quite time consuming and failed
frequently.
Many Thanks
Geoff Barkman
Hi Forrest
Most of your problems might be tied up in using virtialbox for your demo.
You can't possibly borrow another computer? Or perhaps put an alternative
hard drive into the machine for the demo?
I'm sure they will love it if they see it in action.
Many thanks
Geoff Barkman
On 18/08/2016 1:02
at the
start). Now double click on .config folder then go into the autostart
folder. Move your desktop shortcut into there and it will autostart on
login.
Many thanks
Geoff barkman
On 27/06/2016 3:51 pm, "Michael Barnes" <barnmich...@gmail.com> wrote:
> You can also use
It's not quite Australia but there is a few of us in new Zealand that run
Rivendell. I can easily think of 7 stations that run it nz.
Many thanks
Geoff barkman
On 10/06/2016 1:02 pm, "Stan Fotinos" <sfoti...@rtrfm.com.au> wrote:
> Hi Peter
>
> We do run Rivendell.
Hi Wayne.
I hope you can answer this. My machine is 64bit. Can I put rivendell in a
64 bit machine? Or does it only work with a 32 bit machine?
Many thanks
Geoff Barkman
On Sat, May 21, 2016 at 1:15 AM, Wayne Merricks <
waynemerri...@thevoiceasia.com> wrote:
> Hi David,
&
I think one way to do this is the evergreen option. I think it plays if no
there option exists?
Many thanks
Geoff barkman
On May 8, 2016 12:09 PM, "Chuck" <dj.chuc...@googlemail.com> wrote:
> I don't think there is a way to do this, but thought I would check
> here
Hi Jamie.
What is the general health of the machine like? If seen errors like this
from bad ram and crook CD drives.
If you have spare ram try it. Or perhaps run memtest 86. You should be able
to run it for 20 minutes or so to test your ram.
Many thanks
Geoff barkman
On Mar 8, 2016 12:24 PM
I think one thing to watch when going from v1 to v2 is rdadmin password. I
think you are best to remove password on v1 then make a backup. Once
restored on v2, you can then create a password again.
Many thanks
Geoff Berkman
On Feb 26, 2016 3:15 AM, "Wayne Merricks"
Hi tom
One thing you might have to do is log in to rdadmin. It will convert the
database to the new version and back up the old. Running rdadmin after
upgrading an important step.
Many thanks
Geoff barkman
On Sep 23, 2015 12:00 PM, "Tom Van Gorkom" <tomvangor...@gmail.com> wro
valid to play during 1 minute of
the day for your time checks. To fill up the other times have a few
generic evergreen station ids in the Cart to cover those times when
nothing else is valid to play.
Does that help you?
Many thanks
Geoff Barkman
On 9/17/15, Tom Van Gorkom <tomvangor...@gmail.
Hi there.
Apparently that bug has been there for a while.
There is a program called rdmarkerset that you can use to fix the makers.
Many thanks
Geoff barkman
On Sep 9, 2015 4:52 AM, "newsletter, mail" <mail.newslet...@schwoon.info>
wrote:
> No one has that problem.?
>
> H
Also check in the /etc/rd.conf file that the line saying
AudioOwner=USERNAME is correct.
Now log out or reboot the machine. Then try starting rdadmin. You
might also want to check ownership of the /var/snd directory is
correct.
I hope this helps you.
Many thanks
Geoff Barkman
On 8/4/15, Nicholas
and change it to Timeout 3000
1.2 gig for 2 hour audio files, sounds like a pcm wave file. I think
there is a limit of 4 gig on one of those files... my head hurts
trying to work out how long that is.
Many thanks
Geoff Barkman
On 7/14/15, Alessio Elmi alessio_e...@hotmail.com wrote:
I was noticing
anyone else confirm this problem ... or am I imagining it?
Many thanks
Geoff Barkman
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
I just did a test on mp3split
# mp3split -t 3.00 filename.mp3
and it makes a new shorter piece of audio 3 minutes long.
There are other ways you can split it if it detects silence at a point
in the audio.
Many thanks
Geoff
On 4/15/15, Geoff Barkman countryra...@gmail.com wrote:
Hi Les
.
Once the database is correctly made you can also do a database restore
from another Rivendell Database if you have one from another machine.
I'm not sure if this is your first machine or you have another set up
of rivendell.
Many thanks
Geoff Barkman
On 3/10/15, Karl Koscher super...@uwave.fm
My auto trim threshold in RDadmin Manage Hosts rdlibrary is set to
-30. I don't think I've had any problems with silence being added.
Many thanks
Geoff Barkman
On 2/18/15, Angelena Chapman angel...@renewfm.org wrote:
Hi!
When I set the AutoTrim Threshold to 0 in my rdimport command it works
Hi Steve
If you open the clock you want to copy. Type in a new 3 letter number
combination up the top hit the save as button down the bottom give it a new
name to save it. Then close the clock. Open your new one. Edit away. You
might meant to change the colour of the clock so you can spot it when
I've had this problem with 1 pci soundcard. The onboard card worked well
but then I changed pci card for another type so I figured it was a non
compatible card.
I'm now using the funny card in a machine for non rivenddell stuff.
Many thanks
Geoff barkman
On Jan 13, 2015 8:41 AM, Christian Arnaut
Hi Al
In rdadmin Manage Services Select your service name and then Hit
edit Select Your Voice track Group (mine is using the default group
Temp).
You may have to close rdlogedit before the group becomes active.
I Hope this helps.
Many thanks
Geoff
On 1/6/15, Al Sargent
of Rivendell
with version 1.71 of Rd and I think you have to use pcm wave file for
your audio library which takes lots of file storage space.
Many thanks
Geoff Barkman
On Nov 30, 2014 5:03 PM, Ryan Kingham k1n9h...@gmail.com wrote:
I'm trying to set up a network but I'm having trouble with the MySQL
mins to import the 52 minute audio files it
didn't miss out by much time.
Many thanks
Geoff Barkman
On 11/21/14, Rob Landry 41001...@interpring.com wrote:
On Fri, 21 Nov 2014, Geoff Barkman wrote:
Thats interesting about the files importing before they are finished
copying. I struck
Hopefully the apache fix will do it.
Many thanks
Geoff Barkman
On 11/20/14, Alessio Elmi alessio_e...@hotmail.com wrote:
Hi,
not sure if it solves the problem.. We don't use dropboxes, our
problem was that long tracks (like pre-recorded entire shows) give
error when imported. Anyway track is present
a copy of that
script? it might be something I can adapt to my situation?
Many thanks
Geoff Barkman
On 11/21/14, Rob Landry 41001...@interpring.com wrote:
On Thu, 20 Nov 2014, Alessio Elmi wrote:
Hi, not sure if it solves the problem.. We don't use dropboxes, our
problem was that long tracks
. Make
sure rdairplay is open before you do it.
It is possible that something is blocking port 3306 that rml commands
get sent on.
I hope this helps
Many Thanks
Geoff Barkman
On 11/21/14, Ryan Kingham k1n9h...@gmail.com wrote:
Both of my RD Machines aren't recognizing any of my commands when I
/14 07:34, Geoff Barkman wrote:
I've set up Rivendell dropboxes for my friends Radio Station.
Running Lubuntu 14.04 Rivendell v 2.9.3
His machine is also identical specs to mine. Apart from having more
ram and 20 thousand songs in the database. My system has about half of
that.
I've made
-base.conf file. We can help you set that up if
needed.
I hope this helps you.
Many Thanks
Geoff Barkman
On 11/19/14, Tim Camp t...@wnsp.com wrote:
Greetings,
Generally if you check the alsa project any of the cards listed there to
work on linux will work.
Don't know about akai, but surprised
).
Many thanks
Geoff Barkman
On 11/19/14, Lorne Tyndale ltynd...@tyndaleweb.com wrote:
To further what Goeff said...
I run Ubuntu 10.04 and yes - it does like swapping around sound cards.
PCI can be hard coded, but with USB - even hard coded - I've found that
it'll still from time to time swap
Error OK... but
the file has imported.
The Audio carts are about 52 minutes long (128k mp3) ... should I make
them half that length?
Any thoughts
Geoff Barkman
___
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http
Recieved in Nz too.
I had to retrieve Andy's Email out of my Spam box. For some reason
gmail does like you... but I'm sure you're a reasonable sort of
person. You use Rivendell... so you must be good :)
Many thanks
Geoff
On 11/14/14, Frederick Gleason fr...@paravelsystems.com wrote:
On Nov 13,
Hi Bernardo
You could try looking at the main system log by using the tail
command. For example...
In a terminal.. type the following line.
tail /var/log/syslog
See if that give you any clues. You could try adding -100 to the
command to display the last 100 lines of information.
tail -100
I've had this problem before. What has probably happened is the Friday log
finished early. It clicked over to Saturday and then it got to midnight and
then it jumped to end and then moved to Sunday.
You can probably prove this by the first item on Saturday playing by the
play count in rdlibrrary
I was having a few problems with rdairplay crashing randomly and
leaving silence on air. I made a script to check if it is running and
restart if neccessary and delete the rdairplaylock file.
I hope someone finds this usefull.
I think someone wrote something similar a while back using a while
in that directory instead.
I've gone back to Lubuntu 14.04 now (... so I don't have access to
that machine anymore.
Many thanks
Geoff Barkman
On 7/28/14, Andy Sayler a...@wmfo.org wrote:
Also, make sure you didn't include the '$' in the 'sudo apt-get update |
grep' command. I just added
Yes...Some people have created a password for the admin user... so
those people have to blank it to nothing during the transition.
I got caught out with my database and had to get my wife's assistance
to log on to to mysql and alter it using the command line.
many thanks
Geoff Barkman
On 7/3/14
might block yourself out.
I think someone else might have documented having to do this.
Many thanks
Geoff Barkman
On 7/2/14, Wayne Merricks waynemerri...@thevoiceasia.com wrote:
If you can; set up v2 on a separate machine with enough space for the
audio/db.
Once that is working copy over /var/snd
Hi there
Thats scary. I looked at my 5 computer rivendell set up has nearly
half the machines with Hyphens ( - ) in them. I don't generally do
reports but that might cause problems if I start doing that in the
future.
Many Thanks
Geoff Barkman
On 6/24/14, Lorne Tyndale ltynd...@tyndaleweb.com
to put the computer
back on air if the audio stream goes down (10 second silence
detection)?
Many thanks
Geoff Barkman
On 5/21/14, Jim Stewart jstew...@paceaudio.com wrote:
My Rivendell works perfectly with a BT ACS 8.2 Plus, including all the GPIO
and silence sense capabilities.
Under Edit
and fixes the database. You need to stop
all your rivendell processes to do.
Many thanks
Geoff Barkman
On Apr 13, 2014 6:07 AM, Rob Landry 41001...@interpring.com wrote:
On Sat, 12 Apr 2014, Lorne Tyndale wrote:
When it is slow / has stopped working, does TOP show anything eating up
CPU
How is the network file share mounted?
Are you using nfs or samba? Samba can be quite unstable if you are using
that.
Many thanks
Geoff Barkman
On Apr 12, 2014 3:08 AM, Rob Landry 41001...@interpring.com wrote:
That doesn't seem to have helped.
Alas, none of the logs I've checked offer any
. Check the ownership of all your audio in your /var/snd using
the command ls -l /var/snd
The audio should belong to the user that runs rivendell and the group
should be rivendell.
I hope this helps.
Many thanks
Geoff barkman
On Mar 24, 2014 1:30 PM, t...@bigmixradio.com t...@bigmixradio.com
wrote
What is the last trasition on the log before the log chain event?
If it is play the loading of the new log will take longer. Seque will be
quicker especially if it is a song with a long fade out.
sent by geoff on his android phone
On Mar 13, 2014 12:36 PM, Dan Gruner d...@loudaudio.co.uk wrote:
Hi Marc
I do a similar thing on a Saturday night... I made some sound codes
for live recordings of songs. And have different clocks for my
Saturday evening programming... the clocks have different events the
pull up Live recordings out of my music category... give a sort of
live feel to the show
the admin user password on 1.7.x
versions of Rivendell you need to change to no password or you might
get locked out of your system.
I think someone might have made some more comprehensive notes about
the transition... It might even be in the main Rivendell Docs.
Many thanks
Geoff Barkman
On 2/14/14
Geoff Barkman
On 2/4/14, Cowboy c...@cwf1.com wrote:
On Monday 03 February 2014 06:18:15 pm Rick wrote:
Virtual idea sounds great with phase check being critical.
Except that some phase deviation is intentional, caused by mic
placement when the source is recorded, so that's not an
entirely
Hi Brandon
The music library is the easiest part to duplicate. Are the computer or
host names the same or are they different? If the are different you will
need to go into rdadmin on your original machine and create the new host
name. Now once that is done you back up the database in rdadmin. This
dearer than the model that cowboy said about.
cheers
Geoff Barkman
On 1/14/14, Ryan Williams rya...@gmail.com wrote:
Does anyone have a recommendation for a USB to Serial adapter? This is to
control a BT 8x2 switcher using the Appliance v2.
Ryan
Hi mathew
Thats a common problem with the cards swapping around. The sound cards are
easy to hard code in the values.
First you need to identify the card types.
I can send you the details tpmorrow cos im away from my studio at the
moment.
Many thanks
Geoff
sent by geoff on his android phone
On
Well done ales so with your tunneling.
I use an Ubuntu program called gstm to tunnel to save using the command
line. You can save connections to make them easy to reuse
Many thanks
Geoff
On Nov 7, 2013 10:23 PM, Alessio Elmi alessio_e...@hotmail.com wrote:
Hi there,
yesterday I succeeded in
Hi Alessio
Are you sure that you want to run Rivendell on Debian Sid? Sid is
generally the Testing version of Debian and can produce interesting
results with any software.
If you were planning in implementing Rivendell at your station a
Stable version would be a best bet.
All the best
Geoff
, but supports also other MPEG versions and layers.
It can be useful for finding corrupted files (e.g. incompletely
downloaded).
And thats what Synaptic says...
Many Thanks
Geoff Barkman
On 10/18/13, Fred Gleason fr...@paravelsystems.com wrote:
On Oct 17, 2013, at 18:59 23, Nate Hartmann wrote:
Just
for you to look through.
I hope this helps.
Many thanks
Geoff Barkman
On 9/10/13, Pedro Picoto (TSF/tec) pedro.pic...@tsf.pt wrote:
Update...
To get a 192kbps bitrate, the Rdlibrary is set to 96kbps. Nice offset :-)
The sample rate is stuck on the 48kbps...
Hints for the cd issue. Any
Hi Kevin
I presume this is just one machine or is it a networked installation.
What linux version are you using? (I've put some comments further down
in the email)
On 9/1/13, Kevin, Natalia, Stacey and Rochelle spar...@gmail.com wrote:
Hi Guys,
I have built a new Rivendell box for the local
is Work station is only half a day because BBC
satelite runs over night... and under 10 thousand items of music ...
whereas home station runs 24/7 music with close to 15 thousand items in the
database.
Many thanks
Geoff Barkman
On Wed, May 15, 2013 at 8:59 AM, Robert Jeffares
jeffares.rob
1 - 100 of 204 matches
Mail list logo