First off let's try the latest hamlibNew hamlib for installation directions
#1 Shut down WSJTX/JTDX
#2 Download either the 32-bit or 64-bit DLL matching the 32/64-bit version of
WSJTX/JTDX -- hopefully your browser doesn't block it but may warn you multiple
times.
If you can do a "Save As" you
This can be done using either rigctld or FLRig and rigctlcom.
rigctlcom provides a TS-2000 emulator that can work with most any program
needing a COM port to talk to the rig and work simulataneously with WSJTX
connected to rigctld or FLRig.
So you can set up WSJTX to use Hamlib NET rigctl or
Please place this file as described below
https://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0
C:\Users\[username]\AppData\Local\WSJT-X
The WSJT-X_Rigcontrol.log file will be in the same location
For Linux put it in
~/.config
The WSJT-X_Rigcontrol.log file
I need everyone to test the latest Hamlib please!!
All known rig bugs have been fixed.
Testing in Rig Split and Fake It would be appreciated as well as rigctld
testing.
Successes/Failures please report.
Some recent important fixes are IC-9700 in split mode should work better now
and split
Please place this file as described
belowhttps://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0
C:\Users\[username]\AppData\Local\WSJT-X The WSJT-X_Rigcontrol.log file will
be in the same location For Linux put it in ~/.config The
WSJT-X_Rigcontrol.log file will be here:
From my notes helping somebody else.
FTDX-10 Data/Pkt mode bandwidth not working..had to use USB mode Data
Out Level=0 ()
Some more info
https://ki5gfu.com/2021/10/14/ftdx-10-setting-up-wsjt-x-configuration-for-digital-eg-ft8/
Mike W9MDB
On Thursday, June 23, 2022 at
All 5-v
On Thursday, June 23, 2022 at 09:18:14 AM CDT, Hrafnkell Eiriksson via
wsjt-devel wrote:
I'll get you that log later today. What verbose level do you need on rigctld
(how many v)?
Thanks Hrafnkell TF3HR
On Thu, Jun 23, 2022 at 1:44 PM Black Michael via wsjt-devel
In \Users\[username]\AppData\Local\WSJT-X rename the WSJT-X.ini file.
That will allow you to start a new setup.
Mike W9MDB
On Wednesday, June 22, 2022 at 07:06:52 PM CDT, Donhawbaker via wsjt-devel
wrote:
At first RC1 worked fine. But now it boots up, shows the splash beta screen,
e communication to hamlib even though it is not set to use DTR or
RTS PTT?Could it be that the code still tries to open a local COM port even
though the rig control is set to a network server and PTT is selected as CAT?
Thanks for your help Hrafnkell TF3HR
On Thu, Jun 23, 2022 at 12:06 PM Black
till tries to open a local COM port even
though the rig control is set to a network server and PTT is selected as CAT?
Thanks for your help Hrafnkell TF3HR
On Thu, Jun 23, 2022 at 12:06 PM Black Michael via wsjt-devel
wrote:
WSJT-X has to be set up to use the same RTS keying and the the /dev/tty
PTT
PTT over hamlib is working, it's just WSJT-X that is not using it. I can use
e.g. a voice keyer in Log4OM and it does PTT properly through hamlib.
73 de Hrafnkell TF3HR
On Wed, Jun 22, 2022 at 11:07 PM Black Michael via wsjt-devel
wrote:
The 706MKIIG does not do CAT PTT per se but the ptt-typ
The 706MKIIG does not do CAT PTT per se but the ptt-type=RTS should work.
Why do you have rst_state=ON? That conflicts with ptt-type=RTS and might be
why it's not working.
And dtr_state=ON would only be needed if your CAT cable needs power from the
computer to work.
Mike W9MDB
On
Please test using rigctl to ensure this works.
rigctl-wsjtx -m 16011 -r /dev/xx -s 57600
Adjust com port and baud rate to suit.
Then run these two command
W *TT 0
W *T0 0
First one should turn PTT on and 2nd one should turn it off.
I don't have the ability to build a deb package for you.
Turn on "Controls" and adjust your "Start" to "Start 100" and your waterfall
will look better.
Flatten does not like to see the edges of one's bandpass.
Mike W9MDB
On Thursday, June 16, 2022, 09:06:49 PM CDT, Alex Lelievre via wsjt-devel
wrote:
I’ve been testing the 2.6.0-rc1
rn to RX
went to wrong frequency. (1 bug)
Now rig does not move while transmitting and return to RX goes still wrong.
(2 bugs)
-- Saku via wsjt-devel kirjoitti 4.6.2022 klo 9.17:
Yep! I have it.
I will make pull after weekend and see what that brings.
Black Michael via wsjt-devel kirjo
-a468f0de-20220603.tar.gz
Black Michael via wsjt-devel kirjoitti 3.6.2022 klo 16.39:
In that case please use this DLL and send me the debug log as described
below.
https://www.dropbox.com/s/7aejdv74nfjxr0q/libhamlib-4.dll?dl=0
Please place this file as described below
https
)
Black Michael via wsjt-devel kirjoitti 3.6.2022 klo 15.09:
It has been fixed.
http://n0nb.users.sourceforge.net/
Mike W9MDB
On Friday, June 3, 2022, 05:03:29 AM CDT, Kari Sillanmäki via wsjt-devel
wrote:
Hi Saku, Michael, Mike et al
I can
I think this has been fixed in the latest
Hamlib.http://n0nb.users.sourceforge.net/
Mike W9MDB
On Friday, June 3, 2022, 03:06:21 AM CDT, Saku via wsjt-devel
wrote:
Hi Michael !
Could you test with your IC-7300 this way:
set "split rig" and check "Allow TX frequency changes while
It has been fixed.
http://n0nb.users.sourceforge.net/
Mike W9MDB
On Friday, June 3, 2022, 05:03:29 AM CDT, Kari Sillanmäki via wsjt-devel
wrote:
Hi Saku, Michael, Mike et al
I can duplicate this behaviour reported by Saku on my 7300.
I'm using the rigctld-wsjtx bundled
running more wires. Some transverters, SG Labs, have to be restarted
every time you switch LOs.
Sent from my iPad
> On May 31, 2022, at 12:09 PM, Black Michael via wsjt-devel
> wrote:
>
>
> I need everyone to test the latest Hamlib
> Testing in Rig Split and Fake It wo
:
> Wed, 1 Jun 2022 16:13:42 + (UTC)
> Black Michael via wsjt-devel
> kirjoitti:
>
> Tested, but don't understand behaviour? Why freq goes -500 Hz when
> tx'ing and stays there. I.E. I set 21074, both vfo, when first TX, lets
> say vfo-b goes 21073500 and stays there.
AM, Black Michael via wsjt-devel wrote:
> > I need everyone to test the latest Hamlib
> > Testing in Rig Split and Fake It would be appreciated.
> > Successes/Failures please report.
Works ok with TS-590SG and TS-890S. Tested only "fake it&
According to what I have the Xeigu X6100 does not have a Data/Pkt mode.
You have something that indicates it does?
If you can generate some debug with this and put the Xiegu into Data/Pkt before
you start WSJT-X I can see what it is providing.
Please place this file as described
lit rig" problem, and there only then when TX frequency differs
from RX (I.E. on both ends of band slot)
Black Michael via wsjt-devel kirjoitti 31.5.2022 klo 19.04:
I need everyone to test the latest Hamlib Testing in Rig Split and Fake It
would be appreciated. Successes/Failures
I need everyone to test the latest Hamlib Testing in Rig Split and Fake It
would be appreciated.Successes/Failures please report.
New hamlib for installation directions
#1 Shut down WSJTX/JTDX
#2 Download either the 32-bit or 64-bit DLL matching the 32/64-bit version of
WSJTX/JTDX -- hopefully
And JTAlert solves all of that problem for Windows.
Mike W9MDB
On Tuesday, May 17, 2022, 09:10:44 AM CDT, Dave Slotter, W3DJS via
wsjt-devel wrote:
A simpler solution, rather than asking the developers for a new feature, was
simply be to enlarge the wsjtx window to make the list
How is your shack grounded?
You'll find some adaptors on my QRZ page which you can use that can help.In the
FT-991A case you can use the USB A-B adaptor which will break the USB shield
connection to the rig and then you can use a-a cables instead like USB 3.0
cables which have better
Yes...you need to parse the message yourself. It is in the Logged ADIF message
but sounds like want it besides there.
Mike W9MDB
On Saturday, May 7, 2022, 06:09:11 AM CDT, Jaime Robles via wsjt-devel
wrote:
Good morning all,
I am the developer of KLog.
Are you looking for more than this?
/wsprd: invalid option -- '?'
Usage: wsprd [options...] infile
infile must have suffix .wav or .c2
Options:
-a path to writeable data files, default="."
-B disable block demodulation - use single-symbol noncoherent demod
-c
What exactly did you hear about?
I know wsjtx improved may be releasing a new version soon with some additional
contest support.
Mike W9MDB
On Thursday, April 14, 2022, 07:54:35 AM CDT, robert evans LAST_NAME via
wsjt-devel wrote:
Could we beta test this new ver.
that I heard about
And can you make CTRL-click keep it on please?There are use cases for it.
Mike W9MDB
On Sunday, March 6, 2022, 11:20:58 AM CST, DG2YCB, Uwe via wsjt-devel
wrote:
Hi all,
Since I had similar requests for such a function in the past, I already
programmed a time limit for the
Michael via wsjt-devel
kirjoitti:
> There was a problem with muting that should be fixed in the latest
> hamlib.But I'm not sure this is related to what you're describing
> with rigctld.
>
> Mike W9MDB
Hi Mike
I compiled latest hamlib and no better.
It can be tested by choosin
My suggestion would be to default the Tune to 30 seconds (some tuners are slow)
and then have CTRL-Click make it stick.
Mike W9MDB
On Sunday, March 6, 2022, 06:10:13 AM CST, Reino Talarmo via wsjt-devel
wrote:
I also belong to the continuous carrier lot. Already now there is the TX
There was a problem with muting that should be fixed in the latest hamlib.But
I'm not sure this is related to what you're describing with rigctld.
Mike W9MDB
On Saturday, March 5, 2022, 12:51:11 AM CST, jarmo via wsjt-devel
wrote:
Fri, 4 Mar 2022 18:22:10 +0100
Juergen
Should be fixed in latest hamlib...
New hamlib for Windows installation directions
#1 Shut down WSJTX/JTDX
#2 Download either the 32-bit or 64-bit DLL matching the 32/64-bit version of
WSJTX/JTDX -- hopefully your browser doesn't block it but may warn you multiple
times.
If you can do a "Save
No work that I know of.
Do you have a reference for CAT control?
It appears it's only for receiving and not transmitting, right?
Mike W9MDB
On Sunday, February 13, 2022, 04:42:53 PM CST, Lillian Kish via wsjt-devel
wrote:
I want to add direct rig control for the HackRF SDR into
Change the pulldown that says Reference to something else.
Mike W9MDB
On Sunday, February 13, 2022, 04:59:21 PM CST, Howard Ling via wsjt-devel
wrote:
Somehow I managed to make the waterfall disappear.
I suspect that this was a bad combination of mouse movements & clicks, but
No it's not by design -- it's an error in parsing that I thought was fixed
before.
Mike W9MDB
On Wednesday, January 26, 2022, 09:10:11 AM CST, Reino Talarmo via
wsjt-devel wrote:
>The problem was that a signal decoded on 80M. I replied with a -18 SNR but
>when the station
Anybody out there doing Mac compiles with XCode that could test a cross compile
for IOS with WSJT-X?
https://forum.qt.io/topic/130514/error-when-cross-compiling-for-ios-with-xcode13
Mike W9MDB
___
wsjt-devel mailing list
There was a bug in the FT991 capabilities which has been fixed. Waiting to
hear if it fixes the chatter.
Still have another fix to do for non-targetable VFO B rigs to set mode on VFOB
just once.
Mike W9MDB
On Sunday, January 16, 2022, 11:46:39 AM CST, Tom M0LTE via wsjt-devel
wrote:
I just made a patch.Let me know if this fixes the chatter.
rig split is the problem. If you still get chatter try Fake It.
The 991 does not have targetable mode so have to make another fix to allow Rig
Split to set mode on VFOBas long as the chatter problem is fixed now.
Mike W9MDB
Uwe,
Are you using rig split? Richard is.
There is a problem in there for rig split.
Mike W9MDB
On Sunday, January 16, 2022, 11:03:11 AM CST, DG2YCB, Uwe via wsjt-devel
wrote:
Richard,
Can you rule out that this is not an RF interference? Because my FT-991 runs
flawlessly
This is a long-standing problem that needs to be fixed.
WSJT-X should use a default path that includes the version#.
That will provide two things
#1 Very easy for user to start whichever version they want
#2 Avoid duplicate program entries
This patch makes the default install directory match
Please use the latest hamlib and use the wsjtx_log_config.ini file to generate
debug.Run 2.5.2 and generate one debug log.Then run 2.5.4 and generate
another.Send both logs to my QRZ email address mdblac...@yahoo.com
New hamlib for Windows installation directions
#1 Shut down WSJTX/JTDX
#2
Look at the menu Save and pick None -- that will stop keeping the wav files.
The dropped audio is due to sound card latency enough to cause frames of sound
data to be missed. Usually because the computer is too busy. Disk I/O can
cause lots of problems.
Make sure you exclude all your ham
Are you sure the DTR/RTS isn't due to your serial interface needing them high
to power the serial device?That's the only time I've ever seen those needed.
You can download the new DLL from here http://n0nb.users.sourceforge.net/ later
tonight that will be dat4ed 20211227.
I added the X6100 with
You are letting your PC go to sleep with all this running?Or are you saying
that was just accidental?
Mike W9MDB
On Monday, December 27, 2021, 10:27:36 AM CST, Alan Groups via wsjt-devel
wrote:
Hi, I left WSJT-X running on Rx while I had to do something else, which
unexpectedly
The problem is somewhat random.
We've already found a fix for it and a new version should be released soon.
Mike W9MDB
On Friday, December 24, 2021, 11:19:53 AM CST, alan2--- via wsjt-devel
wrote:
Hi, I don't see this behaviour when sending a TX5 (at low power into a dummy
load
I was able to reproduce this under WinDbg and using audio loopback and my own
callsign.It happened after the transmit of W9MDB R-20Which also
matches the behavior seen by Tom AA4VV Critical error detected c374
(6fbc.6fb8): Break instruction exception - code 8003 (first chance)
If you could please run WinDbg and attach it to the WSJT-X process.Maybe it
will tell us something.
https://www.microsoft.com/en-us/p/windbg/9pgjgd53tn86?rtc=1=pivot:overviewtab
Mike W9MDB
On Tuesday, December 21, 2021, 02:44:35 PM CST, Tom Berry via wsjt-devel
wrote:
On
with
calls like W9YOY/M or K0VQM/4 ? I have been unable to make v2.5.3
crash, using any of these recipes.
-- Joe
On 12/20/2021 2:21 PM, Black Michael via wsjt-devel wrote:
> There's a problem duplicating this error...I tried a loopback test here
> and no crashes
>
> Soquesti
not easily reproducible a bisect
isn't worthwhile. valgrind shows nothing on Linux.
Mike
On Monday, December 20, 2021, 05:02:12 PM CST, Laurie, VK3AMA via
wsjt-devel wrote:
On 21/12/2021 8:04 am, Black Michael via wsjt-devel wrote:
> Well yes it's multi-threaded. Don't believe tha
Michael via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net]
Sent: 20. joulukuutata 2021 21:21
To: wsjt-devel@lists.sourceforge.net
Cc: Black Michael
Subject: Re: [wsjt-devel] Reproducing 2.5.3 /4 crash WSJT-x
There's a problem duplicating this error...I tried a loopback test here
There's a problem duplicating this error...I tried a loopback test here and no
crashes
Soquestion for those seeing this problem.
For Dana...it sounds like you did a restart of WSJT-X and duplicated the
problem, right?
So maybe there's a setting in WSJT_X that is related.
Can you send your
Get the latest hamlib from here...IC-7300 behavior (and other Icoms) should all
be good now.
https://github.com/Hamlib/Hamlib.git
Mike W9MDB
On Tuesday, December 14, 2021, 10:09:11 AM CST, Kari Sillanmäki via
wsjt-devel wrote:
Hi,
I did some tests as well...
On 14.12.2021 12.19,
Since Bill is silent key now there is no need for that repository anymore and
should probably be removed.
The Hamlib repository is here
https://github.com/Hamlib/Hamlib
Mike W9MDB
On Tuesday, December 14, 2021, 01:51:02 AM CST, Claude Frantz via
wsjt-devel wrote:
Hi all,
What
Dave,
Please contact me off-listmdblac...@yahoo.com
Mike W9DMB
On Wednesday, December 1, 2021, 11:25:58 PM CST, Dave J Barnes via
wsjt-devel wrote:
So a new version of wsjtx is coming in a few days?
On 12/1/21 10:49 PM, Black Michael via wsjt-devel wrote:
You
No.
There is no scheduled date for the next release.
Mike W9MDB
On Wednesday, December 1, 2021, 11:25:58 PM CST, Dave J Barnes via
wsjt-devel wrote:
So a new version of wsjtx is coming in a few days?
On 12/1/21 10:49 PM, Black Michael via wsjt-devel wrote:
You
Barnes via
wsjt-devel wrote:
Any help for Linux users?
On 12/1/21 10:16 PM, Black Michael via wsjt-devel wrote:
Please try the latest dll. This version is due to be 4.4 to be released in
the next few days.
New hamlib for Windows installation directions #1 Shut down WSJTX #2
Please try the latest dll.This version is due to be 4.4 to be released in the
next few days.
New hamlib for Windows installation directions#1 Shut down WSJTX#2 Download
either the 32-bit or 64-bit DLL -- hopefully your browser doesn't block it but
may warn you multiple times.If you can do a
It has been fixed. Just need to install the new dll.
New hamlib for Windows installation directions#1 Shut down WSJTX#2 Download
either the 32-bit or 64-bit DLL -- hopefully your browser doesn't block it but
may warn you multiple times.If you can do a "Save As" you can save it directly
in
Exclude the path in your antivirus.You can google "defender exclusions" or such
depending on your antivirus.
Mike W9MDB
On Thursday, November 18, 2021, 09:47:23 AM CST, Rich - K1HTV via
wsjt-devel wrote:
Since I started using WSJT-X version 2.5.2, I have seen thiserror message pop
This thread has side tracked.What rig are you running? Is it possible to set a
different mode on VFOB? If not we can put some logic in to avoid setting mode
on VFOB. Most rigs can set VFOB to a separate mode but older rigs do not have
targetable mode.
FR1 is not supposed to turn on split on
or Sub VFO.
>
> Just my two cents on this problem.
>
> 73,
>
> Sam W2JDB
>
>
>
> -Original Message-
> From: Bill Somerville via wsjt-devel
> To: wsjt-devel@lists.sourceforge.net
> Cc: Bill Somerville
> Sent: Fri, Nov 12, 2021 4:56 pm
> Subjec
New hamlib for Windows installation directions#1 Shut down WSJTX#2 Download
either the 32-bit or 64-bit DLL -- hopefully your browser doesn't block it but
may warn you multiple times.If you can do a "Save As" you can save it directly
in \WSJT\WSJTX\bin and replace the libhamlib-4.dll that is
I'm able to reproduce this behavior. Minimum window size is not restored.
More than default window size is restore.
Mike W9MDB
On Friday, November 12, 2021, 10:08:56 AM CST, Saku wrote:
Black Michael kirjoitti 12.11.2021 klo 15.54:
> Try a new config and see if that fixes the
This is on an Elecraft K4.When transmitting in split mode VFOA=Rx and VFOB=Tx
and one changes the Tx frequency WSJT-X assumes since VFOB is the current VFO
that it reverses roles and sets VFOA frequency instead.If VFOB is active and
split and ptt=on then VFOB is still tx. I really don't know
Try the latest hamlib and see if that fixes the problem.
New hamlib for Windows installation directions#1 Shut down WSJTX#2 Download
either the 32-bit or 64-bit DLL -- hopefully your browser doesn't block it but
may warn you multiple times.If you can do a "Save As" you can save it directly
in
Try a new config and see if that fixes the problem.
wsjtx -r test
Mike W9MDB
On Friday, November 12, 2021, 01:14:04 AM CST, Saku via wsjt-devel
wrote:
HI!
I see the problem #1 every day when I open wsjtx. And every day I shrink it
horizontally to minimum. And again it starts
What rig entry are you using?
Mike W9MDB
On Saturday, November 6, 2021, 11:30:04 AM CDT, Chris via wsjt-devel
wrote:
Hi All,
I’ve installed WSJT-X version 2.5.2 on my Win10 64-bit PC, working with a
Funcube Pro+ receiver. I’ve used this receiver with previous versions of
I assume that's not fatal though, correct? It should operate normally after
startup.
Mike W9MDB
On Friday, November 5, 2021, 08:06:46 AM CDT, Al Flapan via wsjt-devel
wrote:
I am running vn2.5.2 on a W10 pro 64 bit PC with an ICOM IC7100
connected via the USB data cable.
And what rig is this?
VFOA moves just like VFOB does in split so shouldn't make any difference in F/H
mode.
Mike W9MDB
On Thursday, November 4, 2021, 05:26:18 PM CDT, Marco Calistri via
wsjt-devel wrote:
Hello Mike,
My answers inline.
Il 04/11/21 09:35, Black Michael via
split all the way back to the first version of
WSJT-X that supported FT8.)
I do not use DATA modes – just plain USB filtering.
David, AK2L
From: Black Michael via wsjt-devel
Sent: Thursday, November 4, 2021 05:36
To: WSJTX Group ; WSJT Software Development
Cc: Black Michael
from the developer of RUMLogNG that VFO-B isn’t readily available to
logging software.The software can only track VFO-A regardless of which VFO is
controlling the transceiver.
Kind regards,
- Peter, K1AV
On Nov 4, 2021, at 8:35 AM, Black Michael via wsjt-devel
wrote:
I'm trying to solve rig
I'm trying to solve rig split operation problems with Yaesu rigs and need some
Yaesu operator help...
I need any Yaesu owners to state their rig model and whether or not "Rig split"
works in WSJT-X or if you see flashing on the rig when Rig split is turned on.
So 3 questions#1 Can you make
I just submitted wsjtx-2.5.1-win64.exe to virus total and got 1 hit on a
generic (it shows 2 but lists
1).https://www.virustotal.com/gui/file/b2007bf26ede3e8f68866d817971645c3c6fb88c9a952ba7bc3982993ce453c8
None of the listed items that are inserted are on my system so it's definitely
a false
Tomorrow replace the hamlib-4.dll in the WSJTX directory from the W32 or W64
zip file from herehttp://n0nb.users.sourceforge.net/
It will be dated 20211022
Tell us if it works OK.
Mike W9MDB
On Thursday, October 21, 2021, 08:14:49 PM CDT, Al Flapan via wsjt-devel
wrote:
I updated
Does the Mac version use static or shared libraries?
If you open up a terminal -- cd to the wsjtx directory and do this
rigctl - 2>&1 q| grep Hamlib
What does it show?Should look like this: rigctl Hamlib 4.4~git Wed Oct 20
21:21:43 2021 + SHA=655337
Mike W9MDB
On Thursday,
That has been fixed in the latest hamlib.
You can download the appropriate 32-bit or 64-bit zip file from
herehttp://n0nb.users.sourceforge.net/
Extract the libhamlib-4.dll and replace the one in the WSJTX directory.
Mike W9MDB
On Tuesday, October 19, 2021, 05:11:40 AM CDT, Barry Jackson
The only note we have in hamlib is the Linux sets RTS/DTR high on opening and
we set it low.
We obviously can't debug your code for you but it sounds like you have the
wrong port when you deassert RTS. You should be able to create a test which
just toggles ptt on/off every second or so to
I updated the man page.
This was changed to maintain combability with older versions.
So the new way is the correct way.
Mike W9MDB
On Monday, October 18, 2021, 11:30:45 AM CDT, Saku via wsjt-devel
wrote:
There is something to do with man pages. For example:
[saku@hamtpad ~]$
On more potential solution -- In fox mode run pseudo-split and drop the
frequency 500Hz automaticallyi.e. Fake-It mode for both RX & TX.
Mike W9MDB
On Sunday, October 17, 2021, 09:11:52 AM CDT, Virginia Greene via
wsjt-devel wrote:
Bill,
This actually kept me up last night!
For
Probably in the same directory as the wsjtx executable.
Mike W9MDB
On Saturday, October 16, 2021, 11:37:36 PM CDT, jarmo via wsjt-devel
wrote:
Started to play with ref.spec, started measure, never got
stop measuring, or didn't find stop measuring button.
Wsjtx 2.5.0 self compiled,
If you do File/Open log directory you should see the folder.It's the
"WSJT-X.ini" file that contains everything.
Mike W9MDB
On Saturday, October 16, 2021, 10:37:27 PM CDT, William Spencer via
wsjt-devel wrote:
On all modes my grid locator info does not appear in the message
I can see the opposite possibility in this data. Looks like below 300 the
levels are low, high from about 300-400, then pretty consistent Red line here
is 50-point moving average of 5000 points. Above 2200 we're getting into the
region where bandpass limits might have an effect of some sort
Got it...thanks Bill.
Mike W9MDB
On Friday, October 15, 2021, 01:13:21 PM CDT, Bill Somerville via
wsjt-devel wrote:
On 15/10/2021 19:05, Barry Jackson via wsjt-devel wrote:
On 15/10/2021 18:37, Black Michael via wsjt-devel wrote:
What's the title of that manual? I'd hope
:
On 15/10/2021 17:46, Black Michael via wsjt-devel wrote:
> I'll have a fix for this shortlyI put in a split check for Elecraft
> rigs and that is doing the "FT" query which isn't supported as Bill notes.
>
> Bill...do you know of a CAT manual for the TS590/690? I can
I turned it into a generic "don't set unless necessary". Was causing power
problems on the K4 too.Hopefully it's fixed now and applies to all rigs that
can get split status and trying to set split on again. Split off will always
run a command.
Mike W9MDB
On Friday, October 15, 2021,
via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net]
Sent: 15. lokakuutata 2021 19:47
To: wsjt-devel@lists.sourceforge.net
Cc: Black Michael
Subject: Re: [wsjt-devel] Split-RIG broken with hamlib-4.3.1 with TS-450S (4.2
is fine)
I'll have a fix for this shortlyI put in a split check
I'll have a fix for this shortlyI put in a split check for Elecraft rigs
and that is doing the "FT" query which isn't supported as Bill notes.
Bill...do you know of a CAT manual for the TS590/690? I can't seem to find one.
Mike W9MDB
On Friday, October 15, 2021, 11:30:50 AM CDT,
Actually a few rigs with xon/xoff including the old Kenwood THD74 according to
our defaults.
.serial_handshake = RIG_HANDSHAKE_XONXOFF,./kenwood/thd74.c
.serial_handshake = RIG_HANDSHAKE_XONXOFF,./aor/ar8200.c
.serial_handshake = RIG_HANDSHAKE_XONXOFF,./aor/sr2200.c
Since you're not getting any answer with hardware flow it sounds like you have
a 3-wire RS232 cable. So how are your cable pinouts connected?
Try this
rigctld -v -Z -v -m 2003 -s 4800 -r /dev/ttyUSB0 -t 4532
--serial_handshake=None --write_delay=5
See if that write_delay helps in your
I noticed you have serial_handshake=XONXOFF and stopbits=1
Just let those two items default to stopbits=2 and serial_handshake=Hardware
which what I show is the setup for the TS-450.
And you should be able to just check all the Default labels in WJST-X's rig
control tab too (which, by the way,
You can set up a crontab entry to do whatever you want...call a shell script to
delete it or rename it.
Mike W9MDB
On Thursday, October 14, 2021, 05:06:52 PM CDT, Marco Calistri via
wsjt-devel wrote:
Hello,
I red some articles regarding how to prevent WSJT-X to produce its
That should be fixed in the master branch now.Can you please try that?
Mike W9MDB
On Thursday, October 14, 2021, 02:36:33 PM CDT, Barry Jackson via
wsjt-devel wrote:
There seems to be a regression in hamlib-4.3.x which I have been testing
for our dev branch.
I maintain the wsjtx
Steve Ireland VK3VM/VK3SIR has been busy improving JTSDK to compile multiple
programs:
Hamlib -- static or dllWSJT-XJTDXJS8Call
And others are being planned. Here's the new site
https://hamlib-sdk.sourceforge.io/
Mike W9MDB
___
wsjt-devel mailing
What do you hate about the task bar?
On Monday, October 4, 2021, 04:27:59 PM CDT, Randall Hansen via wsjt-devel
wrote:
I installed Win 11 with no problems except some adjusting of Codec levels. PS
I hate what they did to the taskbar
On Mon, Oct 4, 2021 at 3:54 PM August Treubig
According to hamspots.net and pskreporter you are being seen.
Mike W9MDB
On Thursday, September 30, 2021, 10:39:29 AM CDT, Marco Calistri via
wsjt-devel wrote:
Il 30/09/21 10:58, Bill Somerville via wsjt-devel ha scritto:
On 30/09/2021 14:36, Marco Calistri via wsjt-devel
CAT can be related to audio -- front/back connectors matter for example.
Mike W9MDB
On Wednesday, September 29, 2021, 11:27:09 AM CDT, Claude Frantz via
wsjt-devel wrote:
On 9/29/21 5:58 PM, jarmo via wsjt-devel wrote:
Hi Marco, Jarmo and all,
> Unfortunately not working. Compiled
Also...please the the git clone so you can get any patches I put in.The tar
file only gets updated overnight.
On Wednesday, September 29, 2021, 11:03:57 AM CDT, jarmo via wsjt-devel
wrote:
Wed, 29 Sep 2021 12:05:31 -0300
Marco Calistri via wsjt-devel
kirjoitti:
> Il 29/09/21
201 - 300 of 1443 matches
Mail list logo