It is a very powerful program and it can do a lot of things (usually multiple ways to do the same thing). If you transition over from a drawing board, like I did, it is a fairly easy switch. If you are transitioning over from an AutoCad based program, you will have to unlearn a lot of things. There is a learning curve, but that can be said with any change that you make. I went to the weeklong beginner/intermediate course and if Cliff can teach me to use the program, then anyone can learn it.
Mike Hill From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Rocci Cetani 3 Sent: Tuesday, September 20, 2016 10:52 AM To: sprinklerforum@lists.firesprinkler.org Subject: sprinkler design programs Anyone on the forum use AutoSPRINK? I thinking about switching over and would like some user input. Thank you!! Rocci Cetani III, CET Designer Water-Based Fire Protections Systems Layout, Nicet Level III Northern California Fire Protection Services Inc. 16840 Joleen Way Bldg. A Morgan Hill, CA 93037 P-(408) 776-1580 EXT.111 F-(408) 776-1590 roc...@norcalfire.com <mailto:roc...@norcalfire.com> www.norcalfire.com <http://www.norcalfire.com/> CONFIDENTIALITY NOTICE: This message and any document accompanying it may contain confidential information belonging to the sender. The information is intended only for the use of individual or entity named above. If you are not the intended recipient, or the employee or agent responsible to deliver this message to the intended recipient, you are hereby notified that any disclosure, copying or taking of any action in reliance on the contents of this information is strictly prohibited. If you have received this transmission in error, please immediately notify us by telephone to arrange for return of the documents.
_______________________________________________ Sprinklerforum mailing list Sprinklerforum@lists.firesprinkler.org http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org