n testing:
<https://packages.debian.org/linuxcnc-uspace>
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
ies, and configure and build it:
<http://linuxcnc.org/docs/2.9/html/code/building-linuxcnc.html>
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
On 1/6/24 17:27, Chris Morley wrote:
help please :)
Thanks.
Thanks for the bug report, the VM host crashed, fixed now.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists
nge.
That's the wrong kernel: "PREEMPT" is not enough, you need "PREEMPT_RT"
in the uname string.
This is usually the difficult part of getting systems with out-of-tree
vendor-specific kernels to work well with LinuxCNC.
--
Sebastian Kuzminsky
_
be fixed now.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
On 11/5/23 18:02, Phill Carter via Emc-developers wrote:
It seems that Builder 4041.deb-buster-rtpreempt-amd64 has run out of disk space.
Thanks for the bug report. Should be fixed now.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc
more likely to bite.
Any thoughts?
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
x7f3a)
Which doesn't really seem to match?
If none of rtapi_app's input files needed symbols from libgpiod, then
the linker will not link rtapi_app against libgpiod. See for example
how the -ltirpc in the linker command line did not cause rtapi_app to be
On 8/29/23 14:11, Peter Wallace wrote:
On Tue, 29 Aug 2023, Sebastian Kuzminsky wrote:
On 8/29/23 13:02, Alan Condit wrote:
Have you had any luck getting spi devices to run on Debian 12 Bookworm?
I got spi-bcm2835 to load on boot but so far I havent been able to
create
any spi devices.
I
, SPI is working for me on RPi4 running Debian Bookworm and LinuxCNC
(from debian.org).
I just `loadrt hm2_rpspi` (note, not the generic `hm2_spi`).
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https
OS Buster/armhf debs to our debian package archive.
The Pi crashes maybe once per month - the whole computer locks up so it
has to be powercycled.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
h
On 8/10/23 02:31, Phill Carter via Emc-developers wrote:
Buildbot seems to be asleep.
Thanks for the bug report. The Raspberry Pi 4 had crashed again and the
buildbot was waiting for it, holding things up. I rebooted it and now
it's moving forward again.
--
Sebastian Kuzminsky
it when it crashes
and the buildbot moves forward again.
Here's the current build queue:
<http://buildbot.linuxcnc.org/buildbot/builders/.checkin>
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
place them in debian/patches?
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
into the oldest active stable branch.
<http://linuxcnc.org/docs/2.9/html/code/contributing-to-linuxcnc.html#_use_of_git_in_the_linuxcnc_project>
I'll backport it to 2.9.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-deve
lt;https://github.com/LinuxCNC/linuxcnc-gbp).
I think that's ok. ¯\_(ツ)_/¯
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
obviously wrong.
Uploaded it to the github issue here:
<https://github.com/LinuxCNC/linuxcnc/issues/2388>
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listin
and HAL files, plus anything else relevant) to the Github
ticket?
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
It worked well on Saturday, so let's do it again on Sunday: Meet in the Double
Tree lobby at 8:30 for breakfast, then Tormach at 10 for hacking.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https
Spectate on the hackfest here:
https://us02web.zoom.us/j/8498381080?pwd=REEzTW4xMngvQWk3SlhqQUdmWFNUdz09
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc
A bunch of us are meeting in the lobby of the Doubletree tomorrow (Saturday) at
8:30 to find breakfast somewhere. We're planning to be at Tormach around 10.
Join us or be talked about!
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc
On 4/7/23 09:21, Jon Elson wrote:
Does anyone have agenda items for the meeting?
The responsible thing would probably be to talk a bit about how to get
2.9 released and out the door...
But the fun thing would probably be to geek out over neat hardware...
--
Sebastian Kuzminsky
I'd love to see Remora in action and get a tour of how it's implemented.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
and added to the man3 section?
docs/src/man/ should do it.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
list.
I've locked master and 2.* while we address the problem.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
ng else.
But I don't intend to clean up all the violations of this preference, so my
opinion doesn't count for much.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
On 3/20/23 11:21, Jon Elson wrote:
Will people who plan to attend (weekend of April 22-23) please confirm?
I'm going to attend.
Looking forward to seeing you all! :-)
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers
.
Can you create an issue on the bug tracker for that one?
address? I don't have it book-marked.
https://github.com/linuxcnc/linuxcnc/issues
Click "New issue", big green button in the upper right.
--
Sebastian Kuzminsky
___
Emc-
On 3/8/23 13:23, Hans Unzner wrote:
PS: In the README.md, I guess there is a linebreak intended between
`docker pull debian:bookworm` and ` docker build ...`. It's displayed on
GitHub in one line...
Thanks, fixed.
--
Sebastian Kuzminsky
___
Emc
On 3/8/23 12:21, Hans Unzner wrote:
Am 04.01.23 um 17:19 schrieb Sebastian Kuzminsky:
On 1/4/23 05:09, Hans Unzner wrote:
However, I have some annotations:
- You could mention that the tests need to be run as sudo (at least
for it only worked so) and need Python >= 3.8
Hmm, I run t
I can imagine halcmd emitting a warning if you call loadrt with an argument
that's just "=", but that feels a bit over-specific for this particular user's
syntax error.
--
Sebastian Kuzminsky
On March 5, 2023 4:54:15 PM MST, andy pugh wrote:
>On Sun, 5 Mar 2023 at 23:45, Jon
upload of 2.9~pre1 (f1270d6ed7) right now.
I think we'll keep uploading "small, targeted fixes" after the freeze.
Let's get 2.9 into as good a shape as we can.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists
l Time OS, RTAPI, and HAL_LIB modules
>Starting LinuxCNC IO program: io
>Starting HAL User Interface program: halui
>Starting TASK program: milltask
>Starting DISPLAY program: axis
>Removing HAL_LIB, RTAPI, and Real Time OS modules
>Removing NML shared memory
have a Github Action that warns on .adoc changes in
master or .po/.pot changes in 2.9?
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
d like to see us
at least try this.
If we can't make ourselves review each others' PRs in a timely fashion
the experiment will have failed and we can go back to the current "push
at will" workflow.
--
Sebastian Kuzminsky
___
Emc-de
), by editing the FROM line in the Dockerfile and rebuilding the
image.
Ideally we'd run this test all the time, on every supported platform,
just like we do our other tests.
I just tried one of the gmoccapy configs by hand on bullseye and it
failed in the same way.
--
Sebast
to supply the
contents of our files in /proc? It's part of the mainline kernel.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
Great! Thanks for figuring this out Dewey :-)
On December 10, 2022 10:43:06 AM MST, Dewey Garrett wrote:
>In <863c8874-ef3b-4f5d-a1fb-6135dc438...@highlab.com> Sebastian Kuzminsky
> writes:
>
>>Does it build on both uspace and RTAI?
>
>$ git status -uno
>On br
>
>___
>Emc-developers mailing list
>Emc-developers@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/emc-developers
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc
tml/code/building-linuxcnc.html#Satisfying-Build-Dependencies>
.)
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
oard the GUI should
communicate that promptly to Task so Task can tell the motion controller
to stop jogging.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo
incorporation in January 2021 and is
currently included in the 2.9 branch.
Thanks for correcting my outdated information!
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo
nd send that message to recipient(s) on
the network. I believe Machinekit made some progress in this area, but
I don't know how far they got and I never saw a PR that I could understand.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@l
viduals in the community choose
to offer you.
Code talks, especially well implemented, well documented, well tested
code grounded in community discussion and rough consensus.
--
Sebastian Kuzminsky
___
Emc-developers mailing li
, then merge up. When you apply a patch to multiple branches
independently, and then apply different bugfixes in different branches,
the result is chaos and regressions.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers
have no intention of working on this myself, but I would be happy to
review a PR that has successfully made it past our automated package &
test systems.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.n
se.
So that's my thinking. I hope this shows why i think merging up is
better than cherry-picking.
--
Sebastian Kuzminsky
On 11/27/22 11:11, Chris Morley wrote:
Well we will never agree on anything different if we never discuss it.
How about throwing out an opinion here?
Chris
_
t RTAI
* Among all the CI/CD pipelines options mentioned before, only those
allowing to launch hypervisor based virtual machines with a freely chosen
or custom kernel would allow testing RTAI
This is exactly correct. Thanks for the concise explanation of the
situation.
--
Sebastian Kuz
xCNC/mesaflash/actions/runs/3422479631
https://github.com/LinuxCNC/mesaflash/blob/master/.github/workflows/ci.yml#L43-L47
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/l
/1401.rip-wheezy-rtai-i386/builds/7201>
Of course this only works on a CI/CD machine running an RTAI kernel, and
with sufficient capabilities/permissions to load and unload kernel modules.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Em
On 11/14/22 18:43, m...@mattshaver.com wrote:
On 2022-11-14 15:54, Sebastian Kuzminsky wrote:
In order to support testing LinuxCNC on RTAI the buildbot uses custom
VMs which i created a long time ago and maintain poorly. It all runs
on hardware in my house, on my local network, so I am
On 11/14/22 16:58, Rod Webster wrote:
Perhaps the Github actions could be extended to build the 2.9 branch?
Our current Github Actions already builds & tests all branches (but does
not publish any packages).
--
Sebastian Kuzminsky
___
ance.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
easy(-ish), usable options for LinuxCNC
on Raspberry Pi now.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
On 9/14/22 17:27, Phill Carter wrote:
On 15 Sep 2022, at 4:53 am, Sebastian Kuzminsky wrote:
Does anyone know if there's a well-liked pre-built official or
community-supported Rpi4 realtime kernel somewhere?
Not sure how modern you want but the kernel on the image here is
5.15.27-rt35-v8
kernel built with Preempt-RT enabled in
the raspbian bullseye package archive...
Does anyone know if there's a well-liked pre-built official or
community-supported Rpi4 realtime kernel somewhere?
Or do I have to reconfigure & rebuild the "official" kernel?
--
Sebas
On 9/5/22 11:33, gene heskett wrote:
On 9/5/22 12:46, Sebastian Kuzminsky wrote:
Note that because of dependencies, 2.8 can't go into any distro newer
than Buster, and 2.9 (aka master) can't go into any distro older than
Bullseye.
uhh, Seb, 2.9 is running quite well on raspios buster. I just
.
All the releases and point-releases should be uploaded to the
distribution. Backports as we see fit.
Agreed 100%.
Note that because of dependencies, 2.8 can't go into any distro newer
than Buster, and 2.9 (aka master) can't go into any distro older than
Bullseye.
--
Sebastian Kuzminsky
On 9/4/22 10:36, Sebastian Kuzminsky wrote:
There are currently four ways to get pre-built debs of linuxcnc:
1. debian.org
2. buildbot
3. www.linuxcnc.org
4. github "artifacts"
I forgot to mention another important difference between the debian.org
debs and the bui
of that debian
release).
2. Package the current stable branch, whatever that is at the time.
This does strongly encourage us to maintain that stable branch until the
debian release reaches its end-of-life.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
/wiki.pl?MeetingsOnIRC
IRC in 2013 was way more reliable that video chats in 2022, but perhaps
less accessible to folks who are not used to it.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https
On 8/5/22 05:41, Rene Hopf via Emc-developers wrote:
Meeting will be Monday 8.8. 20:00 CEST.
What's the link to join? I'll try to be there.
Thanks for organizing!
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers
ng removed from testing.
--
Sebastian Kuzminsky
On June 29, 2022 10:56:46 AM MDT, "Steffen Möller"
wrote:
>On 29.06.22 17:14, Stuart Stevenson wrote:
>> What does 'autoremoval from testing' mean? Is it good or bad?
>
>Harmless. Mostly :)
>
>When ther
?
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
On 6/14/22 08:21, Sebastian Kuzminsky wrote:
The machine has servos with resolvers, but the resolvers only connect
to the servo amps, not to the controller. The are connectors on the
amps for passing the resolvers on to the controller, but those cables
are not present.
Instead this machine has
amps. I'm
guessing in this case the servo amps provide the resolver excitation signal and
we'd try to passively read the resolver response.
Thanks for any help...
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers
age for
that code in the same file, so that infrastructure would have to be
changed or discontinued.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
We could teach our debian packaging to know about build profiles
(https://wiki.debian.org/BuildProfileSpec) and then switch the CI to use
the `nodoc` build profile, but that would leave our poor old Buster
users without local docs.
--
Sebastian Kuzmi
available
on Buster. (The version in Bullseye and newer works.)
So I think the best fix is to backport a working po4a to buster, and add
the updated po4a debs to our deb archive on wlo.
I'm working on this now, hope to have something up later today.
--
Sebastian Kuzminsky
On 6/7/22 08:52, gene heskett wrote:
Cheers, Gene Heskett.
Should be fixed now, thanks for the bug report.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo
On 4/10/22 10:50, andy pugh wrote:
On Sun, 10 Apr 2022 at 15:54, Sebastian Kuzminsky wrote:
Fixed, thanks for the bug report.
Is there scope for a Bullseye builder? (I am wondering about Bullseye for 2.9)
It's on my todo list, but i'm so distracted these days that it's slow
going
On 4/9/22 21:15, Chris Morley wrote:
some builds say offline.
Fixed, thanks for the bug report.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc
rchive:
<https://packages.debian.org/linuxcnc-uspace>
It'll hopefully make it into bookworm/testing in a couple of days.
We'll work on bullseye after that. :-)
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sou
before.
Is the only objection that the version doesn't appear in the changelog?
Or did I miss some email explaining further?
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net
is the status of those projects?
What in-progress projects are missing from this list?
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
?
All our x86/amd64 builds are done in VMs, on big amd64 servers, and that
works really well. Something similar for arm/adm64 would be ideal.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.s
's been solid here. I'd really like feedback before
merging this into 2.8 & master...
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
On 1/10/22 4:39 PM, Phill C wrote:
The Builbot appears to have been hung for a while.
Kicked it, thanks for the bug report.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net
It should probably be a tagged union.
https://en.m.wikipedia.org/wiki/Tagged_union
--
Sebastian Kuzminsky
On Fri, Dec 31, 2021, 09:22 andy pugh wrote:
>
> https://github.com/LinuxCNC/linuxcnc/blob/master/src/emc/motion/motion.h#L216
>
> Basically the command to be executed goes in
feedback on Weblate early.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
in
your (non-English) language.
We welcome your translations!
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
e_surrounding_code
That said, if there's a compelling argument for why this situation is
special and the usual norms should be reconsidered, I'd be happy to hear it.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-develope
t to you?
https://github.com/LinuxCNC/mesaflash/pull/58
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
tsen/linuxcnc>
Another thing that needs doing is to review and update the docs in
master (<http://linuxcnc.org/docs/devel/html/>), especially the Getting
Started section - I bet it's all kinds of out of date.
--
Sebastian Kuzminsky
___
Emc-d
tions like Ubuntu and Mint will pick
up LinuxCNC.
This will make it much easier for people to try out LinuxCNC, and will
greatly increase our visibility in the CNC software world.
This is an exciting time for LinuxCNC, and we could not have done it
without Steffen and Petter. Thank you! <3
languages...
Do you have any concerns, input, or comments on this proposal?
Would you be willing to verify and update the translations into your
languages?
What can we software people do to help make this task easier?
Thanks!
--
Sebastian Kuzminsky
___
Emc-d
On 10/18/21 11:42 AM, Sebastian Kuzminsky wrote:
On 10/18/21 5:01 AM, Gene Heskett wrote:
kmod_module_remove_module() could not remove 'spi_bcm2835':
Operation not permitted
Thanks for the bug report Gene.
I broke master, for rpi4 and everything else. Sorry! Fixing it now
spi_bcm2835: Operation not permitted
hm2_rpspi: ERROR: Failed to execute '/sbin/rmmod spi_bcm2835'
Thanks for the bug report Gene.
I broke master, for rpi4 and everything else. Sorry! Fixing it now...
--
Sebastian Kuzminsky
___
Emc-developers mailing
status
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
but as I recall the tools weren't quite usable yet and we dropped the
project. Maybe the tools have matured since then? The branch is still
in our git repo (`seb/master/po4a`).
--
Sebastian Kuzminsky
On 8/17/21 12:41 PM, JT wrote:
I'd think that from 2.8 on to delete the french documents in case
will need a minor reorg, which means users will
need to update their sources.list.
I volunteer to do this work.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc
.
2. Make a new release tag.
3. Make a dsc from that release tag.
4. Build the dsc by hand, using pbuilder, on all the supported platforms.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https
On 3/6/21 11:49 PM, Phill Carter wrote:
Buildbot has a lost slave.
Bounced, thanks for the bug report.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc
On 12/30/20 8:08 PM, Phill Carter wrote:
Buildbot seems to have been asleep for a while.
The wheezy-i386 buildslave locked up, I rebooted it and now the buildbot
is making progress again.
Thanks for the bug report.
--
Sebastian Kuzminsky
.
It wasn't quite ready back then, but I bet it is now.
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
We have that already:
http://buildbot.linuxcnc.org/buildbot/builders/1660.rip-buster-python3
On Sun, Nov 15, 2020, 12:26 Jose Luis wrote:
> Hello,
>
> Could be possible to add python3 builds to the buildbot
>
>
> Thanks
>
>
>
> ___
> Emc-developers
On 10/10/20 7:18 PM, Phill Carter wrote:
Buildbot appers to be be asleep.
Fixed. Thanks for the bug report.
When the buildbot takes a vacation it's nearly always because one of the
builders crashed and needs to be manually rebooted.
--
Sebastian Kuzminsky
I agree, no need for f-engrave.
On Fri, Sep 4, 2020, 18:05 Phill Carter wrote:
>
>
> > On 5 Sep 2020, at 4:52 am, andy pugh wrote:
> >
> > The Debian Wheezy repository contains a few applications in addition
> > to LinuxCNC.
> > Should these also be included in the Debian Buster repository,
hing fails...
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
://www.debian.org/doc/debian-policy/upgrading-checklist.html
--
Sebastian Kuzminsky
___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
1 - 100 of 883 matches
Mail list logo
