On Friday 04 Apr 2003 11:42 pm, Mark Weaver wrote:
Oscar Santacreu wrote:
El Viernes, 4 de Abril de 2003 13:35, Mark Weaver escribió:
Oscar Santacreu wrote:
El Viernes, 4 de Abril de 2003 06:49, Mark Weaver escribió:
no dice...did the reboot and same thing. the print jobs are just
dropping
It was made clear on the order page that it would be well into April before
they are shipped. The end of April was suggested as a likely date for most
of us.
Anne
On Saturday 05 Apr 2003 6:45 am, eric huff wrote:
If you dig enough, the website says they'll ship when the get them, and to
Hi
I've been following this thread about icons for removable devices but
I'm quite puzzled by the way it looks on my box (installed with 9.1 from
scratch, not upgraded from 9.0 so there is no leftover).
In my /home//Desktop directory I do not have all these .desktop
files (except a
Hi
On a LM9.1 I did install mplayer from Plf and it was all working fine (I
could play any region DVDs).
Then after a few days (I have no clue why it does that now) the DVD
started to act strangely. Basically when I insert a DVD movie that used
to play just fine the DVD reader ejects it
Hi all,
anyone know how to make cut and past work in xchat on mdk9.1?
It would work in 9.0 but but not 9.1.
Any ideas?
Thanks
Gary.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello
Well, I need some advice for a classic problem... I am now unable to get
access to one of my computers, as I forgot my password (root account).
I still have a basic user password, but - no luck - it has expired.
In fact, I am trapped out of my box ;-)
I have some data I need to get
you might want to boot from the installation CD in rescue mode, chroot to the
you root partition and set a new password with passwd.
On Saturday 05 April 2003 12:27, Molotov wrote:
Hello
Well, I need some advice for a classic problem... I am now unable to get
access to one of my
on the lilo prompt try:
linux single
or
linux init=/bin/sh
one of those should work
Cheers
JG
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Frederic Soulier wrote:
Hi
On a LM9.1 I did install mplayer from Plf and it was all working fine (I
could play any region DVDs).
Then after a few days (I have no clue why it does that now) the DVD
started to act strangely. Basically when I insert a DVD movie that used
to play just fine the DVD
On Sat, 5 Apr 2003 06:34 am, Ronald J. Hall wrote:
Every so often, the mouse
dies (no power). I can unplug it, plug it into another USB port (not with
the same group though) and it is instantly back on. Unplugging it from the
original port it was in and plugging it right back in has no effect.
Hi Folks,
as I'm a kind of an Old Unix guy, and having lots of Mirror Sites I'm
getting RPMS, Sources etc. from onto my server-harddrives, I wanted to
add the RPM's at least into the Software Repository to use with the
Mdk-Software Installer.
I do see in the normal directories, that the base
Hi Folks,
I had several crashes using Mdk-9.1 under X-Windows.
Having reacted fast enough once - I saw the X-Server was running Amok,
e.g. using loads of Memory. Usually - the X-Server uses 180MBytes of
Virtual memory, and 55Mbytes of Resident RAM.
This Time, just before the System was
Hi Mate,
I bet you got the exact same Problem I had using the Mdk-2.4.21 kernels.
Add:
acpi=off
To you LILO Append line. The Problem is that the kernel is now able to
actually use Interrupt vectors. One my Motherboard however - (Asus A7N8X
Delux), these did fail. Everything having had an
On Thursday 03 April 2003 20:52, James Sparenberg wrote:
On Fri, 2003-04-04 at 15:09, Damian Gatabria wrote:
Hi.. i'm trying to get to build kernel-multimedia-source from the
contribs.. just
thought i'd add the extra bit of machine-specific optimisation.. but
i'm having problems with it.
Am Samstag, 5. April 2003 14:34 schrieb Joerg Mertin:
Hi Folks,
as I'm a kind of an Old Unix guy, and having lots of Mirror Sites I'm
getting RPMS, Sources etc. from onto my server-harddrives, I wanted to
add the RPM's at least into the Software Repository to use with the
Mdk-Software
Hia again folks,
a last one :) Seems I not able to pass the udma-2 level for my
harddrives. Anyone has a clue as to why the Nforce-IDE port does not
allow more than that ? Or - has it to do with the new IDE-Drivers that
got into 2.4.2x ? (Well, the IDE-Driver cleanups that took place - Thx
I want to set up GnomeMeeting, but have a problem with the video source. I
have the choice of /dev/video0 and /dev/video1, with not possibility of
entering another source so far as I can see. My camera is /dev/sdb, so I
presume that I somehow have to create a /dev/video0 that is linked to
After loading MDK9.1 on a Compaq Proliant 3000 server the server now
shows that one processor has failed during bootup. The raid controller
also comes up with an out of order failure. I went in using the Compaq
configuration disks and got it to stop showing these errors untill i boo
t into Linux.
On Saturday 05 Apr 2003 3:18 pm, Mark Weaver wrote:
Anne Wilson wrote:
On Saturday 05 Apr 2003 1:20 pm, Mark Weaver wrote:
Following your suggestion I opened Konq and watched /var/spool/cups. I
also opened KJobViewer and sent a print job. The Job appeared in the
KJobViewer window, and two
On Saturday 05 April 2003 11:06, Anne Wilson wrote:
I want to set up GnomeMeeting, but have a problem with the video source. I
have the choice of /dev/video0 and /dev/video1, with not possibility of
entering another source so far as I can see. My camera is /dev/sdb, so I
presume that I
On Saturday 05 April 2003 09:09 am, Bill Beauchemin wrote:
After loading MDK9.1 on a Compaq Proliant 3000 server the server now
shows that one processor has failed during bootup. The raid controller
also comes up with an out of order failure. I went in using the Compaq
configuration disks and
Yep. The problem isnt that it shows up as 1 cpu using top but that it is
causing one cpu to be disabled and showing as a failure during bootup or
I should say during the POST pahse of the bootup.
On Sat, 2003-04-05 at 06:26, et wrote:
On Saturday 05 April 2003 09:09 am, Bill Beauchemin wrote:
On Saturday 05 Apr 2003 3:27 pm, Damian Gatabria wrote:
On Saturday 05 April 2003 11:06, Anne Wilson wrote:
I want to set up GnomeMeeting, but have a problem with the video source.
I have the choice of /dev/video0 and /dev/video1, with not possibility of
entering another source so far as I
On Sat, 2003-04-05 at 13:33, Dave Sherman wrote:
Frederic Soulier wrote:
Hi
On a LM9.1 I did install mplayer from Plf and it was all working fine (I
could play any region DVDs).
Then after a few days (I have no clue why it does that now) the DVD
started to act strangely. Basically
Le sam 05/04/2003 à 14:18, J. Grant a écrit :
on the lilo prompt try:
linux single
or
linux init=/bin/sh
one of those should work
Cheers
JG
I have now access again to this machine.
Thank you for your help, and thanks to Zephod too !
Best regards,
FT
--
[INSERT FEELING HERE]
On Saturday 05 April 2003 09:35 am, Anne Wilson wrote:
On Saturday 05 Apr 2003 3:27 pm, Damian Gatabria wrote:
On Saturday 05 April 2003 11:06, Anne Wilson wrote:
I want to set up GnomeMeeting, but have a problem with the video
source. I have the choice of /dev/video0 and /dev/video1,
Can you test the drive under another OS or in another system? I've had
this happen, and seen it happen cdroms before. I became quite bad, to
the point where, if the computer was on, the cdrom would eject. Kind of
annoying seeing as it made the drive completely unusable.
Does it do this for all
I have a wireless network card wmp11.The
computer detects it as a broadcom bcm 4301.I have just installed mandrake
9.1.Can anyone advise me on installing this card for my network? I have tried
several of the "wireless" drivers to no avail!!!
Thanks
Geoff
Hi,
How do I enable LM9.1 to automatically shutdown my system when I choose
turn off from the logoff menu? I see halt... power down... but I need to
press the power button.
Regards,
Norman
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Saturday 05 Apr 2003 4:07 pm, et wrote:
On Saturday 05 April 2003 09:35 am, Anne Wilson wrote:
On Saturday 05 Apr 2003 3:27 pm, Damian Gatabria wrote:
On Saturday 05 April 2003 11:06, Anne Wilson wrote:
I want to set up GnomeMeeting, but have a problem with the video
source. I
On Sat, 2003-04-05 at 16:14, Hezekiah M. Carty wrote:
Can you test the drive under another OS or in another system? I've had
this happen, and seen it happen cdroms before. I became quite bad, to
the point where, if the computer was on, the cdrom would eject. Kind of
annoying seeing as it
On Sat, 2003-04-05 at 11:50, Norman Zhang wrote:
Hi,
How do I enable LM9.1 to automatically shutdown my system when I choose
turn off from the logoff menu? I see halt... power down... but I need to
press the power button.
Regards,
Norman
Add 'apm=off' to the append line in
Hi all,
how do I log in as root from the standard X login on MDK9.1.
The users are iconised so there's now way of entering the user ar root
as you use to be able to on previous versions.
I need to set up xcdroast which has to be done as root..
TIA
Richard
--
richard bown [EMAIL PROTECTED]
Want
richard bown wrote:
Hi all,
how do I log in as root from the standard X login on MDK9.1.
The users are iconised so there's now way of entering the user ar root
as you use to be able to on previous versions.
I need to set up xcdroast which has to be done as root..
TIA
Richard
Assuming kde, in
Thanks I'll try that, I'm using gnome at the moment, so lets try kde
thanks
richard
On Sat, 2003-04-05 at 17:55, Rolf Pedersen wrote:
richard bown wrote:
Hi all,
how do I log in as root from the standard X login on MDK9.1.
The users are iconised so there's now way of entering the user
richard bown said:
Hi all,
how do I log in as root from the standard X login on MDK9.1.
The users are iconised so there's now way of entering the user ar root
as you use to be able to on previous versions.
I need to set up xcdroast which has to be done as root..
Open a console, type 'su',
On Saturday 05 April 2003 11:51 am, richard bown wrote:
Hi all,
how do I log in as root from the standard X login on MDK9.1.
The users are iconised so there's now way of entering the user ar root
as you use to be able to on previous versions.
I need to set up xcdroast which has to be done as
All right, I know I can't complain because I don't pay Mandrake; but I
would have thought that known bugs might have been ironed out for a new
distribution regardless.
Just for the records: in mandrake 9.1 use of gpm (mouse control) in text
consoles as ordinary user (but not as root) is
Hello all
I have a laptop with Mandrake 9.0. Everything works fine except when
pressing the Fn key (which I need to redirect the video to an
external monitor/projector).The system Freezes (the keys ctrl+alt+f1, nor
the ctrl+alt+del
don't work so I have to turn the laptop off and on again).
On Sat, 2003-04-05 at 02:27, Molotov wrote:
Hello
Well, I need some advice for a classic problem... I am now unable to get
access to one of my computers, as I forgot my password (root account).
I still have a basic user password, but - no luck - it has expired.
In fact, I am trapped out
Ok Greg point noted,
Thats a useful one to remember
Richard
On Sat, 2003-04-05 at 18:14, Greg Meyer wrote:
On Saturday 05 April 2003 11:51 am, richard bown wrote:
Hi all,
how do I log in as root from the standard X login on MDK9.1.
The users are iconised so there's now way of entering
I have a laptop with Mandrake 9.0. Everything works fine except when
pressing the Fn key (which I need to redirect the video to an external
monitor/projector).The system Freezes (the keys ctrl+alt+f1 don't work so I
have to turn the laptop off and on again).
Before 9.0 I had 8.2 and the (fn+F7
On Sat, 2003-04-05 at 04:48, Joerg Mertin wrote:
Hi Folks,
I had several crashes using Mdk-9.1 under X-Windows.
Having reacted fast enough once - I saw the X-Server was running Amok,
e.g. using loads of Memory. Usually - the X-Server uses 180MBytes of
Virtual memory, and 55Mbytes of
On Sat, 2003-04-05 at 05:26, Joerg Mertin wrote:
Hia again folks,
a last one :) Seems I not able to pass the udma-2 level for my
harddrives. Anyone has a clue as to why the Nforce-IDE port does not
allow more than that ? Or - has it to do with the new IDE-Drivers that
got into 2.4.2x ?
Richard,
Go to a console, and su to root, and type xcdroast, and enter. Xcdroast will
start, then there's a box where you can add users, and select to allow user
permissions.
Robert Crawford
On Saturday 05 April 2003 04:51 pm, richard bown wrote:
Hi all,
how do I log in as root from the
On Sat, 2003-04-05 at 08:32, Adolfo Bello wrote:
On Sat, 2003-04-05 at 11:50, Norman Zhang wrote:
Hi,
How do I enable LM9.1 to automatically shutdown my system when I choose
turn off from the logoff menu? I see halt... power down... but I need to
press the power button.
Regards,
On Sat, 2003-04-05 at 09:04, richard bown wrote:
Thanks I'll try that, I'm using gnome at the moment, so lets try kde
thanks
richard
On Sat, 2003-04-05 at 17:55, Rolf Pedersen wrote:
richard bown wrote:
Hi all,
how do I log in as root from the standard X login on MDK9.1.
The
On Sat, 2003-04-05 at 09:14, Greg Meyer wrote:
On Saturday 05 April 2003 11:51 am, richard bown wrote:
Hi all,
how do I log in as root from the standard X login on MDK9.1.
The users are iconised so there's now way of entering the user ar root
as you use to be able to on previous versions.
On Sat, 2003-04-05 at 10:42, pedro gomez wrote:
I have a laptop with Mandrake 9.0. Everything works fine except when
pressing the Fn key (which I need to redirect the video to an external
monitor/projector).The system Freezes (the keys ctrl+alt+f1 don't work so I
have to turn the laptop off
At 06.27 05/04/2003, you wrote:
On Fri, 2003-04-04 at 15:22, Olaf Marzocchi wrote:
[I sent this message some days ago but I did not see it in the ML. I send
it again.]
I downloaded two days ago the ISOs and yesterday I installed them in the
following PC:
Mobo PCChips 748lmrt, 128+64+32 ram,
Hi, me again.
Its Bill Gates fault not mine in case your getting fed up with me !!!
Xcdroast , burning an iso image, its not very clear, is there a help
file ?..
Or which options do I need to do this..
When I said Bill Gates I was'nt joking,
I acquired a copy of XP Pro and threw it on the
On Saturday 05 Apr 2003 9:38 pm, richard bown wrote:
Hi, me again.
Its Bill Gates fault not mine in case your getting fed up with me !!!
Xcdroast , burning an iso image, its not very clear, is there a help
file ?..
Or which options do I need to do this..
Just to clarify - do you have an
On Saturday 05 April 2003 02:38 am, Frederic Soulier wrote:
Hi
I've been following this thread about icons for removable devices but
I'm quite puzzled by the way it looks on my box (installed with 9.1 from
scratch, not upgraded from 9.0 so there is no leftover).
In my /home//Desktop
Sorry that was a but vague,, I have an iso image I 'd like to tun into a
cd.
Richard
On Sat, 2003-04-05 at 21:42, Anne Wilson wrote:
On Saturday 05 Apr 2003 9:38 pm, richard bown wrote:
Hi, me again.
Its Bill Gates fault not mine in case your getting fed up with me !!!
Xcdroast ,
El Sábado, 5 de Abril de 2003 01:37, Mark Weaver escribió sabiamente:
On Friday 04 April 2003 07:14 am, Oscar Santacreu wrote:
Try rebooting both: computer and printer before trying to print.
OTOH, when I was using the pbmtozjs driver, the printer sometimes came
into a strange catatonic
El Sábado, 5 de Abril de 2003 00:42, Mark Weaver escribió sabiamente:
Oscar Santacreu wrote:
El Viernes, 4 de Abril de 2003 13:35, Mark Weaver escribió:
Oscar Santacreu wrote:
El Viernes, 4 de Abril de 2003 06:49, Mark Weaver escribió:
Hi list,
this evening I bought a new HP LaserJet 1000
El Sábado, 5 de Abril de 2003 18:51, richard bown escribió sabiamente:
Hi all,
how do I log in as root from the standard X login on MDK9.1.
The users are iconised so there's now way of entering the user ar root
as you use to be able to on previous versions.
I need to set up xcdroast which has
from memory, go to create cd : write cd : master tracks. select the ISO
(it must be in the directory you've configured as xcdroast's swap space)
and click OK, then it'll ask if you want to proceed.
On Sat, 2003-04-05 at 13:00, richard bown wrote:
Sorry that was a but vague,, I have an iso image
On Sat, 2003-04-05 at 11:24, Olaf Marzocchi wrote:
At 06.27 05/04/2003, you wrote:
On Fri, 2003-04-04 at 15:22, Olaf Marzocchi wrote:
[I sent this message some days ago but I did not see it in the ML. I send
it again.]
I downloaded two days ago the ISOs and yesterday I installed them
On Friday 04 April 2003 09:39 pm, John Haywood wrote:
I had the same issue on my GigaByte GA-7VAX1394, until I passed acpi=off to
the kernel at boot (put it in lilo.conf and lilo -t, lilo -v)
I'll try that and see what happens. Thanks!
--
On Saturday 05 April 2003 07:54 am, Joerg Mertin wrote:
Hi Mate,
I bet you got the exact same Problem I had using the Mdk-2.4.21 kernels.
Add:
acpi=off
To you LILO Append line. The Problem is that the kernel is now able to
actually use Interrupt vectors. One my Motherboard however - (Asus
Hi James,
On 4 Apr 2003, James Sparenberg wrote:
This is addressed in the new kernel Thomas is talking about too. I
think you're going to be Thomas's new best friend after Sunday *grin*.
Thx for your directions... And concerning your comments, I bet I will ;)
I'll be looking at the patches
Thanks Jack, but I just managed to make a straight copy on to the cd, so
there's a bit I've missed ?
TIA
Richard
On Sat, 2003-04-05 at 22:17, Jack Coates wrote:
from memory, go to create cd : write cd : master tracks. select the ISO
(it must be in the directory you've configured as
Use urpmi.addmedia without generating a list. It will autogenerate one
for you as it adds the medium. man urpmi.addmedia is your friend.
Cheers
Jason
Steffen Barszus wrote:
Am Samstag, 5. April 2003 14:34 schrieb Joerg Mertin:
Hi Folks,
as I'm a kind of an Old Unix guy, and having lots of
On Sat, 05 Apr 2003 06:38, James Sparenberg wrote:
On Sat, 2003-04-05 at 02:27, Molotov wrote:
Hello
Well, I need some advice for a classic problem... I am now unable to get
access to one of my computers, as I forgot my password (root account).
I still have a basic user password, but
On Sat, 05 Apr 2003 06:30, Troy Arnold wrote:
Troy Arnold
Network Specialist
Norwood Promotional Products, Inc.
106 E. 6th Street Suite 300
Austin, Tx 78701
Phone: 512-542-2250, Fax: 512-477-8603
[EMAIL PROTECTED]
Visit our award-winning website www.norwood.com
By the way, dont bother
I do apologize, but I do not understand?
-Troy
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Michael Adams
Sent: Saturday, April 05, 2003 6:00 PM
To: [EMAIL PROTECTED]
Subject: Re: [expert]
On Sat, 05 Apr 2003 06:30, Troy Arnold wrote:
Troy Arnold
richard bown wrote:
Thanks Jack, but I just managed to make a straight copy on to the cd, so
there's a bit I've missed ?
TIA
Richard
Ref: file:/usr/share/doc/xcdroast-0.98/FAQ
Q:
17. Uh...I feel stupid but how to write downloaded ISO-images?
A:
If you downloaded an ISO-image (e.g. a linux
This advertising is SPAM mate, and as such is regarded as evil.
http://mail-abuse.org/standard.html
http://www.webopedia.com/TERM/s/spam.html
http://www.cybernothing.org/faqs/net-abuse-faq.html
On Sun, 06 Apr 2003 12:05, Troy and Tina Arnold wrote:
I do apologize, but I do not understand?
Ah, you don't need to use a gui. Find out what device your burner is with
cdrecord -scanbus and then use the following command:
cdrecord -dao -v dev=DEV speed=8 driveropts=burnfree file.iso
where DEV is the bus location of your burner that you determined with
scanbus, such as 0,1,0 or
Thank you for the heads up, I sent you an E-Mail Michael as I did not put
two and two together and think my signature file was spam, reset assured
that that will not happen again... Again.. Thanks.
-Troy
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
On Saturday 05 April 2003 03:44 pm, richard bown wrote:
Thanks Jack, but I just managed to make a straight copy on to the cd, so
there's a bit I've missed ?
TIA
Richard
On Sat, 2003-04-05 at 22:17, Jack Coates wrote:
from memory, go to create cd : write cd : master tracks. select the ISO
Too much time at Maggie Mae's
Troy and Tina Arnold wrote:
I do apologize, but I do not understand?
-Troy
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Michael Adams
Sent: Saturday, April 05, 2003 6:00 PM
To: [EMAIL PROTECTED]
Subject: Re:
On Sat, 5 Apr 2003, Anne Wilson wrote:
I do not have any /dev/video of any sort. All ideas welcome.
You might try running modprobe v4l with the cam attached; if you're
running devfs, this should (IIUIC) create the /dev/videoX node(s).
--
Bill Mullen [EMAIL PROTECTED] MA, USA RLU
On Sat, 5 Apr 2003 [EMAIL PROTECTED] wrote:
check if you are in text console or graphical console;
if in text console call mc as mc -d
how would I do the first check with bash ?
Two ways that occur to me:
1) Test on the current value of $TERM.
2) Test whether or not $DISPLAY is set.
HTH!
On Sat, 2003-04-05 at 12:53, Norman Carver wrote:
On Saturday 05 April 2003 02:38 am, Frederic Soulier wrote:
Hi
I've been following this thread about icons for removable devices but
I'm quite puzzled by the way it looks on my box (installed with 9.1 from
scratch, not upgraded from 9.0
Greetings all,
I cannot get Mozilla to start up, either from the menu, from the
taskbar, which does soundwrapper /usr/bin/mozilla %u, or from
a shell, either /usr/bin/mozilla or the above.
When launched from the menu or taskbar, the hourglass tumbles for
about 30 seconds and then disappears with
On Sat, 2003-04-05 at 15:25, Michael Adams wrote:
On Sat, 05 Apr 2003 06:38, James Sparenberg wrote:
On Sat, 2003-04-05 at 02:27, Molotov wrote:
Hello
Well, I need some advice for a classic problem... I am now unable to get
access to one of my computers, as I forgot my password
On Sat, 2003-04-05 at 14:13, Joerg Mertin wrote:
Hi James,
On 4 Apr 2003, James Sparenberg wrote:
This is addressed in the new kernel Thomas is talking about too. I
think you're going to be Thomas's new best friend after Sunday *grin*.
Thx for your directions... And concerning your
Testing and appologizing... seems Evo was sending everthing 3 times..
hopeing this goes through only once.
James
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
On Sat, 2003-04-05 at 16:36, Miark wrote:
Ah, you don't need to use a gui. Find out what device your burner is with
cdrecord -scanbus and then use the following command:
cdrecord -dao -v dev=DEV speed=8 driveropts=burnfree file.iso
where DEV is the bus location of your burner that you
On Sat, 2003-04-05 at 12:53, Norman Carver wrote:
On Saturday 05 April 2003 02:38 am, Frederic Soulier wrote:
Hi
I've been following this thread about icons for removable devices but
I'm quite puzzled by the way it looks on my box (installed with 9.1 from
scratch, not upgraded from 9.0
By mistake, I deleted my setup for urpmi/rpmDrake to use the CDROMs of
9.1. I am using the download edition.
If someone could email the proper configuration to me, I would
appreciate it emmensely.
Rob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
my computer's clock just made the change to N American EDT automatically.
is this controlled by Xntpd, which i have running,
or by something else in the Mandrake-Linux set-up (9.0rc1 currently)?
i can't find anything in the NTP document'n on the subject.
--
84 matches
Mail list logo
