Re: [spectrum] [Spectrum]

[Rajashekar Reddy]

Also, once you loaded the SSDB from prod to your test environment, follow
the below steps in test servers.

move to $SPECROOT/SS-Tools/ and execute the below command to remove the
landscape handle and the precedence of your prod spectrum.

./MapUpdate -remove  -precedence 

Replace   with the landscape handle value of the spectrum
to remove from the map.
And replace  with the precedence value of the landscape to
remove.

Example:  ./MapUpdate -remove 0x40 -precedence 20

On Tue, May 8, 2018 at 7:32 PM, Christian Schneider <
christian.schnei...@4-tune.ch> wrote:

> You may load it with -r #LH to replace the Landscape and you should
> protect it from the production by limiting it via firewall or by setting
> the .hostrc accordingly..
>
> Regards
>
> Christian Schneider
> Enterprise Service Specialist
>
> 4-tune GmbH
> Sägereistrasse 33
> CH-8152 Glattbrugg
>
> Tel   +41 71 930 07 00
> Fax  +41 71 930 07 01
> Mob +41 79 418 45 42
> Mail christian.schnei...@4-tune.ch
>
> > Am 09.05.2018 um 00:33 schrieb pmurtey :
> >
> > It shouldn’t be doing this if you have your .hostrc file, and your hosts
> file locked down.
> >
> > -Original Message-
> > From: Jon Magnus Dullerud [mailto:dulle...@gmail.com]
> > Sent: Tuesday, May 08, 2018 12:06 PM
> > To: spectrum
> > Subject: [spectrum] [Spectrum]
> >
> > Hi.
> > I need to load a save from a fault tolerant env on a test server in the
> same network.
> > Is it possible to create a save that doesn’t contain a landscape map, my
> test server keeps «failing over» to my production backup server.
> >
> > If I could create a save without the landscape map it would solve the
> issue. Ca support tells me to solve it in the .hostrc file, by limiting
> which servers that can access the backupservers, thats a way to do it… I
> think its better to remove any trace / reference to the backup servers.
> > Can it be done and how?
> >
> > Our setup is as lets say:
> > Prod
> > 2 oneclicks
> > 2 spectruservers (one of them is of course the mls) 0x30 and
> 0x80
> > 2 backupservers0x30and0x80
> >
> > Test
> > 1 oneclick
> > 2 spectroserver 0x30and 0x80
> >
> > So I wish to load the db from prod on the test servers without fault
> tolerant, because it will try to use the same backup servers as prod.
> >
> >
> >
> >
> > Best Regards
> > Jon Magnus Dullerud
> > Norwegian Defence.
> > ---
> > To unsubscribe from spectrum, send email to lists...@unc.edu with the
> body: unsubscribe spectrum pmur...@cox.net
> >
> >
> > ---
> > To unsubscribe from spectrum, send email to lists...@unc.edu with the
> body: unsubscribe spectrum christian.schnei...@4-tune.ch
>
>
> ---
> To unsubscribe from spectrum, send email to lists...@unc.edu with the
> body: unsubscribe spectrum rajashekarma...@gmail.com
>



-- 
Cheers...
Rajashekar. A

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] [Spectrum]

[pmurtey]

It shouldn’t be doing this if you have your .hostrc file, and your hosts file 
locked down.

-Original Message-
From: Jon Magnus Dullerud [mailto:dulle...@gmail.com] 
Sent: Tuesday, May 08, 2018 12:06 PM
To: spectrum
Subject: [spectrum] [Spectrum]

Hi.
I need to load a save from a fault tolerant env on a test server in the same 
network.
Is it possible to create a save that doesn’t contain a landscape map, my test 
server keeps «failing over» to my production backup server.

If I could create a save without the landscape map it would solve the issue. Ca 
support tells me to solve it in the .hostrc file, by limiting which servers 
that can access the backupservers, thats a way to do it… I think its better to 
remove any trace / reference to the backup servers.
Can it be done and how?

Our setup is as lets say:
Prod
2 oneclicks
2 spectruservers (one of them is of course the mls) 0x30 and0x80
2 backupservers 0x30and 0x80

Test
1 oneclick
2 spectroserver 0x30and 0x80

So I wish to load the db from prod on the test servers without fault tolerant, 
because it will try to use the same backup servers as prod.




Best Regards
Jon Magnus Dullerud
Norwegian Defence.
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum pmur...@cox.net


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE:[spectrum] Spectrum Upgrade - GEN01091046M.tar

[Tabarzadi, Shahla]

Have you checked the pre-req patches for your OS?

From: Stephen Boshoff [mailto:stephen.bosh...@t-systems.co.za]
Sent: Wednesday, May 3, 2017 3:38 AM
To: spectrum 
Subject: [spectrum] Spectrum Upgrade - GEN01091046M.tar

Hi all
I am busy testing Spectrum 10.2 installation and getting the following error.
[root@SPECTRUM01 spec10.2]# ./installer
Warning: Missing charsets in String to FontSet conversion
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
JRE libraries are missing or not compatible
Exiting
Has anyone else seen this?

Kind regards

Stephen Boshoff
[T-Systems South Africa]

Delivery

Team Leader: ESM

1 The Crescent, Westway Office Park, Westville, Durban, 3629

+27(64)739-5877 (Phone)

+27(60)981-5942 (Mobile)

+27(86)642-3243 (Fax)

Email: stephen.bosh...@t-systems.co.za

Registration Number: 1989/007547/07

[#UNOUTSOURCE]





Disclaimer: This message and/or attachment(s) may contain privileged, 
confidential and/or personal information. If you are not the intended recipient 
you may not disclose or distribute any of the information contained within this 
message. In such case you must destroy this message and inform the sender of 
the error. T-Systems does not accept liability for any errors, omissions, 
information and viruses contained in the transmission of this message. Any 
opinions, conclusions and other information contained within this message not 
related to T-Systems' official business is deemed to be that of the individual 
only and is not endorsed by T-Systems.

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edu with the body: unsubscribe spectrum 
shahla.tabarz...@mail.house.gov

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Antwort: Re: [spectrum] SPECTRUM 10.2 2M model count scale

[Christian Fieres]

Robert,

thanks for pointing me in the right direction. I understand that (a) 
compatibility is given, more than this, a necessity unless you create a 
fresh database and (b) I made a mistake by talking about a "5-byte 
counter" which in fact is merely a "5-nybble counter" or, what I actually 
thought of, a "5 hex-char counter" ;-)

Gee, I wish I had had this doc three months ago! I came from 9.2.2 and 
went through different scenarios until I came up with a 9.2.2 -> 9.4 -> 
10.1 -> 10.1.1 migration plan. Dealing with at least five different 
"Install" documents by CA for the respective interim versions was HELL and 
I doubted that everything came up running again until shortly before 
starting the upgraded SS for the first time. But having a step-by-step 
migration plan beforehand and testing all crucial features before touching 
production proved once again as the best way to do something like this and 
took quite a bit of my time. (This is what management ignores with great 
effort: For them, it is just "click here to install, next, next, finish" 
and, come again, you need ten days for an upgrade? We grant you four, make 
that five in case you need to call support ... :-(

Thanks again!

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de




Von:Robert Hermann <robert.herm...@gmail.com>
An: "spectrum" <spectrum@listserv.unc.edu>
Datum:  30.12.2016 13:29
Betreff:Re: [spectrum] SPECTRUM 10.2 2M model count scale



I stumbled upon the same today.

CA has introduced "Huge Landscape Handels" to support more than 1 million 
models on 1 landscape. The "old" landscape handels are now called "Legacy 
Landscape Handle".
more information: 

https://docops.ca.com/ca-spectrum/10-2/en/administrating/distributed-spectroserver-administration/setting-up-a-distributed-spectroserver-environment#SettingUpaDistributedSpectroSERVEREnvironment-LHLandscapeHandles

Also, Jason Meader had posted 10.2 Upgrade Scenarios document to the 
community board: https://communities.ca.com/docs/DOC-231172056

Upgrades are not getting easier ;)


On Fri, Dec 30, 2016 at 9:57 AM, Christian Fieres <c.fie...@mainova.de> 
wrote:
Hi all,

I am wondering as to how CA deals with the current handle limitation when 
managing up to 2 million models per landscape in SPECTRUM 10.2 - in my 
world, the landscape handle followed by a 5-byte counter provides for 
1048575 unique models in addition to the VNM model at 0x0. Has 
anyone tested 10.2 yet and might enlighten me whether I should pay 
attention to possible changes in handle value sizes when planning a 10.2 
deployment? I don' t think I'm the only geek with quite a bunch of CLI 
scripts that may need a change here and there in case we get another digit 
in between.

Regards,

Christian
Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach, 
Lothar Herbst
Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB 
7173 - USt-IdNr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung
--To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum robert.herm...@gmail.com 

--To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum c.fie...@mainova.de 



Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach, 
Lothar Herbst
Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB 7173 
- USt-IdNr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] SPECTRUM 10.2 2M model count scale

[Robert Hermann]

I stumbled upon the same today.

CA has introduced "Huge Landscape Handels" to support more than 1 million
models on 1 landscape. The "old" landscape handels are now called "Legacy
Landscape Handle".
more information:

https://docops.ca.com/ca-spectrum/10-2/en/administrating/distributed-spectroserver-administration/setting-up-a-distributed-spectroserver-environment#SettingUpaDistributedSpectroSERVEREnvironment-LHLandscapeHandles

Also, Jason Meader had posted 10.2 Upgrade Scenarios document to the
community board: https://communities.ca.com/docs/DOC-231172056

Upgrades are not getting easier ;)


On Fri, Dec 30, 2016 at 9:57 AM, Christian Fieres 
wrote:

> Hi all,
>
> I am wondering as to how CA deals with the current handle limitation when
> managing up to 2 million models per landscape in SPECTRUM 10.2 - in my
> world, the landscape handle followed by a 5-byte counter provides for
> 1048575 unique models in addition to the VNM model at 0x0. Has
> anyone tested 10.2 yet and might enlighten me whether I should pay
> attention to possible changes in handle value sizes when planning a 10.2
> deployment? I don' t think I'm the only geek with quite a bunch of CLI
> scripts that may need a change here and there in case we get another digit
> in between.
>
> Regards,
>
> Christian
> Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
> Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
> Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach,
> Lothar Herbst
> Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB
> 7173 - USt-IdNr. DE 114184034
>
>
> Mainova steht für besten Service, faire Verträge und top Preise für Ihre
> Energie - mit Auszeichnung!
> Mehr Infos unter: http://www.mainova.de/auszeichnung
>
>- --To unsubscribe from spectrum, send email to lists...@unc.edu with
>the body: unsubscribe spectrum robert.herm...@gmail.com
>
>

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: Antwort: RE: Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without Ping?

[Stephen Warne]

Hi Christian
Yes, it's great that the attrr is available. As you say it needs to be 
selectable during a discovery.
Just a thought, policy manager could be used to ensure this attr is always set 
to 'no' so that no one subsequently changes the value.
Regards
Stephen.

From: Christian Fieres [mailto:c.fie...@mainova.de]
Sent: 11 August 2016 08:14
To: Stephen Warne <stephenwa...@karelia-ns.com>
Cc: spectrum <spectrum@listserv.unc.edu>
Subject: Antwort: RE: Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] 
SPECTRUM without Ping?

Hi Stephen,

I wouldn't want to implement such a huge change in behaviour myself too ;-) As 
we have learned, there is this "support_ICMP" attribute that prevents, if set 
to false, Pings to the device. IMHO, all that's left to do is make this 
attribute available to the new model by ip/name dialog boxes. Shouldn't be too 
hard for CA!

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de<mailto:c.fie...@mainova.de>
Internet http://www.mainova.de<http://www.mainova.de/>




Von:Stephen Warne 
<stephenwa...@karelia-ns.com<mailto:stephenwa...@karelia-ns.com>>
An:"spectrum" 
<spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Datum:08.08.2016 15:28
Betreff:    RE: Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM 
without Ping?




Hi Christian

1.   Your security people don't want icmp on the network - box ticked.
2.   You can't stipulate SNMP only on Spectrum so the functionality of 
receiving 'management agent lost' wouldn't be available to you anyway. So the 
fact that Spectrum doesn't get a response to ping when SNMP polling fails will 
mean that a contact lost will be generated as the attempt to ping will not get 
a response- which if you think about it correct.

The only issue I can think off is if this would drive Spectrum nuts if it uses 
ping at any other another time other than in an SNMP lost contact situation. 
Obviously Ping only models would be a no-no ;-) as would having any SPM ICMP 
tests, but I'm not sure if ICMP would be used at any other time during normal 
operation or at startup (haven't sniffed it to find out).

I should add that this point that if you do choose to implement this workaround 
it is entirely at your own risk and like any customisation should be thoroughly 
tested in your lab environment first. I personally would not implement this to 
be honest, it's just an idea in case you are stuck between the proverbial rock 
and a hard place :)

I will go and vote up your idea as having the functionality built in and 
supported is the way to go.

Regards
Stephen.

From: Christian Fieres [mailto:c.fie...@mainova.de]
Sent: 08 August 2016 12:26
To: spectrum <spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Subject: Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without 
Ping?

Stephen,

okay, I get it. Though I don't think preventing the ICMP packets from leaving 
the server will do it, because in that case SPECTRUM won't get replies either 
and will alarm the device. Or am I getting something wrong here? ;-)

I have created an idea document in the Infrastructure Management community on 
ca.com: https://communities.ca.com/ideas/235732324

Even if our management decides to drop the plans or not to implement them in 
the first place - we are still talking rumours here! -, I understand that I am 
not the only one interested in such a feature.


Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de<mailto:c.fie...@mainova.de>
Internet http://www.mainova.de<http://www.mainova.de/>




Von:Stephen Warne 
<stephenwa...@karelia-ns.com<mailto:stephenwa...@karelia-ns.com>>
An:"spectrum" 
<spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Kopie:spectrum 
<spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Datum:05.08.2016 18:14
Betreff:Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without Ping?





Hi Christian

Sorry, what I meant was to take Vilius's suggestion and take it to the next 
level by stopping the icmp packets even getting off the server by utilising the 
server's firewall :-)
I think this could be a quick and dirty workaround for your situation?

I totally agree with everything you say and IMHO the ability to choose to 'dumb 
down' Spectrum by being able to choose to use SNMP only would be a good 
enhanceme

Antwort: RE: Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without Ping?

[Christian Fieres]

Hi Stephen,

I wouldn't want to implement such a huge change in behaviour myself too 
;-) As we have learned, there is this "support_ICMP" attribute that 
prevents, if set to false, Pings to the device. IMHO, all that's left to 
do is make this attribute available to the new model by ip/name dialog 
boxes. Shouldn't be too hard for CA!

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de




Von:Stephen Warne <stephenwa...@karelia-ns.com>
An: "spectrum" <spectrum@listserv.unc.edu>
Datum:  08.08.2016 15:28
Betreff:RE: Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] 
SPECTRUM without Ping?



Hi Christian 
 
1.   Your security people don?t want icmp on the network ? box ticked.
2.   You can?t stipulate SNMP only on Spectrum so the functionality of 
receiving ?management agent lost? wouldn?t be available to you anyway. So 
the fact that Spectrum doesn?t get a response to ping when SNMP polling 
fails will mean that a contact lost will be generated as the attempt to 
ping will not get a response? which if you think about it correct.
 
The only issue I can think off is if this would drive Spectrum nuts if it 
uses ping at any other another time other than in an SNMP lost contact 
situation. Obviously Ping only models would be a no-no ;-) as would having 
any SPM ICMP tests, but I?m not sure if ICMP would be used at any other 
time during normal operation or at startup (haven?t sniffed it to find 
out).
 
I should add that this point that if you do choose to implement this 
workaround it is entirely at your own risk and like any customisation 
should be thoroughly tested in your lab environment first. I personally 
would not implement this to be honest, it?s just an idea in case you are 
stuck between the proverbial rock and a hard place J
 
I will go and vote up your idea as having the functionality built in and 
supported is the way to go. 
 
Regards
Stephen.
 
From: Christian Fieres [mailto:c.fie...@mainova.de] 
Sent: 08 August 2016 12:26
To: spectrum <spectrum@listserv.unc.edu>
Subject: Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM 
without Ping?
 
Stephen,

okay, I get it. Though I don't think preventing the ICMP packets from 
leaving the server will do it, because in that case SPECTRUM won't get 
replies either and will alarm the device. Or am I getting something wrong 
here? ;-)

I have created an idea document in the Infrastructure Management community 
on ca.com: https://communities.ca.com/ideas/235732324

Even if our management decides to drop the plans or not to implement them 
in the first place - we are still talking rumours here! -, I understand 
that I am not the only one interested in such a feature.


Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de




Von:Stephen Warne <stephenwa...@karelia-ns.com>
An:"spectrum" <spectrum@listserv.unc.edu>
Kopie:spectrum <spectrum@listserv.unc.edu>
Datum:        05.08.2016 18:14
Betreff:Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without 
Ping?




Hi Christian

Sorry, what I meant was to take Vilius's suggestion and take it to the 
next level by stopping the icmp packets even getting off the server by 
utilising the server's firewall :-)
I think this could be a quick and dirty workaround for your situation?

I totally agree with everything you say and IMHO the ability to choose to 
'dumb down' Spectrum by being able to choose to use SNMP only would be a 
good enhancement request which I for one would vote up on the community. 
In fact thinking about this it would be preferable to have that option per 
LAN container / subnet / IP address so that a hybrid approach could be 
used so that for devices where ping is ok you wouldn't lose functionality. 


CA need to be aware that other vendors could use this issue to beat them 
up when selling to security conscious customers! Therefore it is in their 
commercial as well as technical interest to provide this choice.

Regards
Stephen.
 


Sent from my iPhone 

On 5 Aug 2016, at 12:13, Christian Fieres <c.fie...@mainova.de> wrote:

Stephen,

I guess I misunderstood Vilius' suggestion - and I believe he meant it 
just like I understood, that is put a firewall between the servers and 
SPECTRUM that blocks ICMP traffic from all stations EXCEPT SPECTRUM. ;-)

I am totally with you - especially in rather unstable environments, the 
slightest change in latency and bandwidth availability can screw your SN

RE: Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without Ping?

[Stephen Warne]

Hi Christian


1.   Your security people don't want icmp on the network - box ticked.

2.   You can't stipulate SNMP only on Spectrum so the functionality of 
receiving 'management agent lost' wouldn't be available to you anyway. So the 
fact that Spectrum doesn't get a response to ping when SNMP polling fails will 
mean that a contact lost will be generated as the attempt to ping will not get 
a response- which if you think about it correct.


The only issue I can think off is if this would drive Spectrum nuts if it uses 
ping at any other another time other than in an SNMP lost contact situation. 
Obviously Ping only models would be a no-no ;-) as would having any SPM ICMP 
tests, but I'm not sure if ICMP would be used at any other time during normal 
operation or at startup (haven't sniffed it to find out).

I should add that this point that if you do choose to implement this workaround 
it is entirely at your own risk and like any customisation should be thoroughly 
tested in your lab environment first. I personally would not implement this to 
be honest, it's just an idea in case you are stuck between the proverbial rock 
and a hard place :)

I will go and vote up your idea as having the functionality built in and 
supported is the way to go.

Regards
Stephen.

From: Christian Fieres [mailto:c.fie...@mainova.de]
Sent: 08 August 2016 12:26
To: spectrum <spectrum@listserv.unc.edu>
Subject: Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without 
Ping?

Stephen,

okay, I get it. Though I don't think preventing the ICMP packets from leaving 
the server will do it, because in that case SPECTRUM won't get replies either 
and will alarm the device. Or am I getting something wrong here? ;-)

I have created an idea document in the Infrastructure Management community on 
ca.com: https://communities.ca.com/ideas/235732324

Even if our management decides to drop the plans or not to implement them in 
the first place - we are still talking rumours here! -, I understand that I am 
not the only one interested in such a feature.


Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de<mailto:c.fie...@mainova.de>
Internet http://www.mainova.de<http://www.mainova.de/>




Von:Stephen Warne 
<stephenwa...@karelia-ns.com<mailto:stephenwa...@karelia-ns.com>>
An:"spectrum" 
<spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Kopie:spectrum 
<spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Datum:        05.08.2016 18:14
Betreff:Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without Ping?




Hi Christian

Sorry, what I meant was to take Vilius's suggestion and take it to the next 
level by stopping the icmp packets even getting off the server by utilising the 
server's firewall :-)
I think this could be a quick and dirty workaround for your situation?

I totally agree with everything you say and IMHO the ability to choose to 'dumb 
down' Spectrum by being able to choose to use SNMP only would be a good 
enhancement request which I for one would vote up on the community. In fact 
thinking about this it would be preferable to have that option per LAN 
container / subnet / IP address so that a hybrid approach could be used so that 
for devices where ping is ok you wouldn't lose functionality.

CA need to be aware that other vendors could use this issue to beat them up 
when selling to security conscious customers! Therefore it is in their 
commercial as well as technical interest to provide this choice.

Regards
Stephen.



Sent from my iPhone

On 5 Aug 2016, at 12:13, Christian Fieres 
<c.fie...@mainova.de<mailto:c.fie...@mainova.de>> wrote:

Stephen,

I guess I misunderstood Vilius' suggestion - and I believe he meant it just 
like I understood, that is put a firewall between the servers and SPECTRUM that 
blocks ICMP traffic from all stations EXCEPT SPECTRUM. ;-)

I am totally with you - especially in rather unstable environments, the 
slightest change in latency and bandwidth availability can screw your SNMP 
communication and there you go. Ping and SNMP are the perfect couple - EXCEPT 
in cases you just cannot use one of them. Let's be honest, you have your 
Pingable devices, so why not have your SNMP only devices - as a CHOICE? I am 
absolutely no friend of  global restrictions, and I don't want to be 
misunderstood in that matter: My intention would be to just disable Ping 
necessity on certain devices. In fact , we do have a use case right now; we 
have a server (rather an appliance when it comes to limited administration) 
which simply cannot be configured to reply to ICMP packets. What we did is 
build a Correlation domain that fi

Antwort: Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without Ping?

[Christian Fieres]

Stephen,

okay, I get it. Though I don't think preventing the ICMP packets from 
leaving the server will do it, because in that case SPECTRUM won't get 
replies either and will alarm the device. Or am I getting something wrong 
here? ;-)

I have created an idea document in the Infrastructure Management community 
on ca.com: https://communities.ca.com/ideas/235732324

Even if our management decides to drop the plans or not to implement them 
in the first place - we are still talking rumours here! -, I understand 
that I am not the only one interested in such a feature.


Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de




Von:Stephen Warne <stephenwa...@karelia-ns.com>
An: "spectrum" <spectrum@listserv.unc.edu>
Kopie:  spectrum <spectrum@listserv.unc.edu>
Datum:  05.08.2016 18:14
Betreff:    Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without 
Ping?



Hi Christian

Sorry, what I meant was to take Vilius's suggestion and take it to the 
next level by stopping the icmp packets even getting off the server by 
utilising the server's firewall :-)
I think this could be a quick and dirty workaround for your situation?

I totally agree with everything you say and IMHO the ability to choose to 
'dumb down' Spectrum by being able to choose to use SNMP only would be a 
good enhancement request which I for one would vote up on the community. 
In fact thinking about this it would be preferable to have that option per 
LAN container / subnet / IP address so that a hybrid approach could be 
used so that for devices where ping is ok you wouldn't lose functionality. 


CA need to be aware that other vendors could use this issue to beat them 
up when selling to security conscious customers! Therefore it is in their 
commercial as well as technical interest to provide this choice.

Regards
Stephen.
 


Sent from my iPhone 

On 5 Aug 2016, at 12:13, Christian Fieres <c.fie...@mainova.de> wrote:

Stephen,

I guess I misunderstood Vilius' suggestion - and I believe he meant it 
just like I understood, that is put a firewall between the servers and 
SPECTRUM that blocks ICMP traffic from all stations EXCEPT SPECTRUM. ;-)

I am totally with you - especially in rather unstable environments, the 
slightest change in latency and bandwidth availability can screw your SNMP 
communication and there you go. Ping and SNMP are the perfect couple - 
EXCEPT in cases you just cannot use one of them. Let's be honest, you have 
your Pingable devices, so why not have your SNMP only devices - as a 
CHOICE? I am absolutely no friend of  global restrictions, and I don't 
want to be misunderstood in that matter: My intention would be to just 
disable Ping necessity on certain devices. In fact , we do have a use case 
right now; we have a server (rather an appliance when it comes to limited 
administration) which simply cannot be configured to reply to ICMP 
packets. What we did is build a Correlation domain that fires an alarm as 
soon as two TCP tests on port 443 from two different IP-SLA test routers 
time out. This not  only says the server is not reachable but merely 
points to an actual problem with its HTTPS server. What we cannot do is 
manage the process that serves port 443 although the box answers to SNMP 
packets. *sigh* It could all be so easy.

Frankly, I am a little afraid that eventually this might be escalating and 
someone (with a higher income than mine) comes up with the idea that an 
Icinga or something might be an alternative to SPECTRUM and forces me to 
do a quick and dirty migration that destroys all the good work we have 
done over the years. Guess I'll have to double check the policies around 
here and proactively place an enhancement request with CA...

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de




Von:Stephen Warne <stephenwa...@karelia-ns.com>
An:"spectrum" <spectrum@listserv.unc.edu>
Datum:    05.08.2016 12:53
Betreff:RE: Antwort: Re: [spectrum] SPECTRUM without Ping?



Tsking up Vilius?s workaround suggestion if you implemented a firewall 
rule actually on your spectrum server and block outbound ICMP traffic that 
will stop it ever reaching the network.
 
The point about spectrum using SNMP and Ping. This actually gives it more 
intelligence and this a major reason for things being implemented the way 
they are. If you rely on using SNMP only then a non responding SNMP agent, 
or the accidential misconfiguration of it, will result 

Re: Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without Ping?

[Stephen Warne]

Hi Christian

Sorry, what I meant was to take Vilius's suggestion and take it to the next 
level by stopping the icmp packets even getting off the server by utilising the 
server's firewall :-)
I think this could be a quick and dirty workaround for your situation?

I totally agree with everything you say and IMHO the ability to choose to 'dumb 
down' Spectrum by being able to choose to use SNMP only would be a good 
enhancement request which I for one would vote up on the community. In fact 
thinking about this it would be preferable to have that option per LAN 
container / subnet / IP address so that a hybrid approach could be used so that 
for devices where ping is ok you wouldn't lose functionality.

CA need to be aware that other vendors could use this issue to beat them up 
when selling to security conscious customers! Therefore it is in their 
commercial as well as technical interest to provide this choice.

Regards
Stephen.



Sent from my iPhone

On 5 Aug 2016, at 12:13, Christian Fieres 
<c.fie...@mainova.de<mailto:c.fie...@mainova.de>> wrote:

Stephen,

I guess I misunderstood Vilius' suggestion - and I believe he meant it just 
like I understood, that is put a firewall between the servers and SPECTRUM that 
blocks ICMP traffic from all stations EXCEPT SPECTRUM. ;-)

I am totally with you - especially in rather unstable environments, the 
slightest change in latency and bandwidth availability can screw your SNMP 
communication and there you go. Ping and SNMP are the perfect couple - EXCEPT 
in cases you just cannot use one of them. Let's be honest, you have your 
Pingable devices, so why not have your SNMP only devices - as a CHOICE? I am 
absolutely no friend of  global restrictions, and I don't want to be 
misunderstood in that matter: My intention would be to just disable Ping 
necessity on certain devices. In fact , we do have a use case right now; we 
have a server (rather an appliance when it comes to limited administration) 
which simply cannot be configured to reply to ICMP packets. What we did is 
build a Correlation domain that fires an alarm as soon as two TCP tests on port 
443 from two different IP-SLA test routers time out. This not  only says the 
server is not reachable but merely points to an actual problem with its HTTPS 
server. What we cannot do is manage the process that serves port 443 although 
the box answers to SNMP packets. *sigh* It could all be so easy.

Frankly, I am a little afraid that eventually this might be escalating and 
someone (with a higher income than mine) comes up with the idea that an Icinga 
or something might be an alternative to SPECTRUM and forces me to do a quick 
and dirty migration that destroys all the good work we have done over the 
years. Guess I'll have to double check the policies around here and proactively 
place an enhancement request with CA...

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de<mailto:c.fie...@mainova.de>
Internet http://www.mainova.de<http://www.mainova.de/>




Von:Stephen Warne 
<stephenwa...@karelia-ns.com<mailto:stephenwa...@karelia-ns.com>>
An:"spectrum" 
<spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Datum:    05.08.2016 12:53
Betreff:RE: Antwort: Re: [spectrum] SPECTRUM without Ping?




Tsking up Vilius’s workaround suggestion if you implemented a firewall rule 
actually on your spectrum server and block outbound ICMP traffic that will stop 
it ever reaching the network.

The point about spectrum using SNMP and Ping. This actually gives it more 
intelligence and this a major reason for things being implemented the way they 
are. If you rely on using SNMP only then a non responding SNMP agent, or the 
accidential misconfiguration of it, will result in a lost contact alarm which 
isn’t necessarily correct. Thiscan mess up availability reports big time.
Over the years I have monitored a number of switch models which stop responding 
to SNMP from time to time and need to be rebooted to rectify this fault. #As 
you would expect getting a change control to reboot a device isn’t always easy 
and until that happens you are stuck with putting the device into maintenance 
mode and accruing down time / unmanaged time in your availability reports. If 
you are using Spectrum Service Manager would be a real.
So in short, the fact that Spectrum uses both ICMP and Ping is usually a good 
thing and gives it an advantage over systems where you are forced to use one or 
the other.

From: Christian Fieres [mailto:c.fie...@mainova.de]
Sent: 05 August 2016 10:38
To: spectrum <spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Subject: Antwort: Re: [spectrum] SPECTRUM without

Antwort: RE: Antwort: Re: [spectrum] SPECTRUM without Ping?

[Christian Fieres]

Stephen,

I guess I misunderstood Vilius' suggestion - and I believe he meant it 
just like I understood, that is put a firewall between the servers and 
SPECTRUM that blocks ICMP traffic from all stations EXCEPT SPECTRUM. ;-)

I am totally with you - especially in rather unstable environments, the 
slightest change in latency and bandwidth availability can screw your SNMP 
communication and there you go. Ping and SNMP are the perfect couple - 
EXCEPT in cases you just cannot use one of them. Let's be honest, you have 
your Pingable devices, so why not have your SNMP only devices - as a 
CHOICE? I am absolutely no friend of  global restrictions, and I don't 
want to be misunderstood in that matter: My intention would be to just 
disable Ping necessity on certain devices. In fact , we do have a use case 
right now; we have a server (rather an appliance when it comes to limited 
administration) which simply cannot be configured to reply to ICMP 
packets. What we did is build a Correlation domain that fires an alarm as 
soon as two TCP tests on port 443 from two different IP-SLA test routers 
time out. This not  only says the server is not reachable but merely 
points to an actual problem with its HTTPS server. What we cannot do is 
manage the process that serves port 443 although the box answers to SNMP 
packets. *sigh* It could all be so easy.

Frankly, I am a little afraid that eventually this might be escalating and 
someone (with a higher income than mine) comes up with the idea that an 
Icinga or something might be an alternative to SPECTRUM and forces me to 
do a quick and dirty migration that destroys all the good work we have 
done over the years. Guess I'll have to double check the policies around 
here and proactively place an enhancement request with CA...

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de




Von:Stephen Warne <stephenwa...@karelia-ns.com>
An: "spectrum" <spectrum@listserv.unc.edu>
Datum:  05.08.2016 12:53
Betreff:    RE: Antwort: Re: [spectrum] SPECTRUM without Ping?



Tsking up Vilius?s workaround suggestion if you implemented a firewall 
rule actually on your spectrum server and block outbound ICMP traffic that 
will stop it ever reaching the network.
 
The point about spectrum using SNMP and Ping. This actually gives it more 
intelligence and this a major reason for things being implemented the way 
they are. If you rely on using SNMP only then a non responding SNMP agent, 
or the accidential misconfiguration of it, will result in a lost contact 
alarm which isn?t necessarily correct. Thiscan mess up availability 
reports big time.
Over the years I have monitored a number of switch models which stop 
responding to SNMP from time to time and need to be rebooted to rectify 
this fault. #As you would expect getting a change control to reboot a 
device isn?t always easy and until that happens you are stuck with putting 
the device into maintenance mode and accruing down time / unmanaged time 
in your availability reports. If you are using Spectrum Service Manager 
would be a real.
So in short, the fact that Spectrum uses both ICMP and Ping is usually a 
good thing and gives it an advantage over systems where you are forced to 
use one or the other.
 
From: Christian Fieres [mailto:c.fie...@mainova.de] 
Sent: 05 August 2016 10:38
To: spectrum <spectrum@listserv.unc.edu>
Subject: Antwort: Re: [spectrum] SPECTRUM without Ping?
 
Vilius, Stephen (and David :-),

I'm afraid in terms of server hardening - and this is the point this whole 
mess started -, just those servers that *cannot* be hardened will thus be 
put behind a sophisticated application layer firewall and might be allowed 
to be reachable by ICMP (by means of a firewall rule). The devices that 
*can* be hardened and thus *not* be put behind this firewall are the ones 
I am talking about as there (supposedly) has been a decision by management 
that ICMP will be blocked as a part of the whole security package.

I guess it will, as David wrote, be a question of opening the local 
firewalls to certain ICMP type packets from the SpectroSERVERs or deciding 
to use a system other than SPECTRUM to do management. Which, of course, 
means migration needs that no one might be willing to pay for.

Nonetheless, I am with Stephen here, it is a very interesting question 
since for SPECTRUM, Ping and SNMP have always been in a marriage, which 
might not be very state of the art nowadays. Wonder what CA would say 
about this...

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 962361

RE: Antwort: Re: [spectrum] SPECTRUM without Ping?

[Stephen Warne]

Tsking up Vilius's workaround suggestion if you implemented a firewall rule 
actually on your spectrum server and block outbound ICMP traffic that will stop 
it ever reaching the network.

The point about spectrum using SNMP and Ping. This actually gives it more 
intelligence and this a major reason for things being implemented the way they 
are. If you rely on using SNMP only then a non responding SNMP agent, or the 
accidential misconfiguration of it, will result in a lost contact alarm which 
isn't necessarily correct. Thiscan mess up availability reports big time.
Over the years I have monitored a number of switch models which stop responding 
to SNMP from time to time and need to be rebooted to rectify this fault. #As 
you would expect getting a change control to reboot a device isn't always easy 
and until that happens you are stuck with putting the device into maintenance 
mode and accruing down time / unmanaged time in your availability reports. If 
you are using Spectrum Service Manager would be a real.
So in short, the fact that Spectrum uses both ICMP and Ping is usually a good 
thing and gives it an advantage over systems where you are forced to use one or 
the other.

From: Christian Fieres [mailto:c.fie...@mainova.de]
Sent: 05 August 2016 10:38
To: spectrum <spectrum@listserv.unc.edu>
Subject: Antwort: Re: [spectrum] SPECTRUM without Ping?

Vilius, Stephen (and David :-),

I'm afraid in terms of server hardening - and this is the point this whole mess 
started -, just those servers that *cannot* be hardened will thus be put behind 
a sophisticated application layer firewall and might be allowed to be reachable 
by ICMP (by means of a firewall rule). The devices that *can* be hardened and 
thus *not* be put behind this firewall are the ones I am talking about as there 
(supposedly) has been a decision by management that ICMP will be blocked as a 
part of the whole security package.

I guess it will, as David wrote, be a question of opening the local firewalls 
to certain ICMP type packets from the SpectroSERVERs or deciding to use a 
system other than SPECTRUM to do management. Which, of course, means migration 
needs that no one might be willing to pay for.

Nonetheless, I am with Stephen here, it is a very interesting question since 
for SPECTRUM, Ping and SNMP have always been in a marriage, which might not be 
very state of the art nowadays. Wonder what CA would say about this...

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de<mailto:c.fie...@mainova.de>
Internet http://www.mainova.de<http://www.mainova.de/>




Von:Vilius Benetis 
<vilius.bene...@gmail.com<mailto:vilius.bene...@gmail.com>>
An:"spectrum" 
<spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Kopie:spectrum 
<spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Datum:05.08.2016 11:26
Betreff:Re: [spectrum] SPECTRUM without Ping?




What about to put a firewall to block icmp from spectrum to restricted devices?

-vilius

On 05 Aug 2016, at 12:14, Stephen Warne 
<stephenwa...@karelia-ns.com<mailto:stephenwa...@karelia-ns.com>> wrote:

Hi David and Christian
I think that Christian's requirement might be that Spectrum never pings devices 
to keep the security team off his back?
I am not aware of any way to prevent spectrum attempting to ping after snmp 
contact failures but would be very interested if you or others know a way of 
changing this default behaviour.
Regards
Stephen.

From: David Game [mailto:david.g...@uk.logicalis.com]
Sent: 05 August 2016 09:58
To: spectrum <spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Subject: RE: [spectrum] SPECTRUM without Ping?

There's an option in discovery to not ping before trying SNMP poll - works OK. 
We have this policy on a couple of high-security customers and around some of 
our own environment.

With regards to devices already discovered, SNMP polling is always first 
anyway, so normal operation shouldn't be affected.  The only thing is on a 
"CONTACT LOST TO DEVICE" alarm, the "are you there yet?" pings every 60 seconds 
or so obviously won't work, so it could be up to one or two poll cycles before 
the alarm clears.

Dave

*** ADVANCE NOTICE ***
*** I WILL BE ON ANNUAL LEAVE FROM AUGUST 15th THRU AUGUST 19TH INCLUSINVE ***
David K. Game
Infrastructure Management Systems Consultant
Logicalis UK Ltd

110 Buckingham Avenue, Slough, Berkshire, SL1 4PF

Logicalis Optimal Network Insight
How future-ready is your network? Find out 
more<http://www.uk.logicalis.com/solutions-and-services/optimal-network-insight/>

Antwort: Re: [spectrum] SPECTRUM without Ping?

[Christian Fieres]

Vilius, Stephen (and David :-),

I'm afraid in terms of server hardening - and this is the point this whole 
mess started -, just those servers that *cannot* be hardened will thus be 
put behind a sophisticated application layer firewall and might be allowed 
to be reachable by ICMP (by means of a firewall rule). The devices that 
*can* be hardened and thus *not* be put behind this firewall are the ones 
I am talking about as there (supposedly) has been a decision by management 
that ICMP will be blocked as a part of the whole security package.

I guess it will, as David wrote, be a question of opening the local 
firewalls to certain ICMP type packets from the SpectroSERVERs or deciding 
to use a system other than SPECTRUM to do management. Which, of course, 
means migration needs that no one might be willing to pay for.

Nonetheless, I am with Stephen here, it is a very interesting question 
since for SPECTRUM, Ping and SNMP have always been in a marriage, which 
might not be very state of the art nowadays. Wonder what CA would say 
about this...

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de




Von:Vilius Benetis <vilius.bene...@gmail.com>
An: "spectrum" <spectrum@listserv.unc.edu>
Kopie:  spectrum <spectrum@listserv.unc.edu>
Datum:  05.08.2016 11:26
Betreff:    Re: [spectrum] SPECTRUM without Ping?



What about to put a firewall to block icmp from spectrum to restricted 
devices?

-vilius

On 05 Aug 2016, at 12:14, Stephen Warne <stephenwa...@karelia-ns.com> 
wrote:

Hi David and Christian 
I think that Christian?s requirement might be that Spectrum never pings 
devices to keep the security team off his back?
I am not aware of any way to prevent spectrum attempting to ping after 
snmp contact failures but would be very interested if you or others know a 
way of changing this default behaviour.
Regards
Stephen.
 
From: David Game [mailto:david.g...@uk.logicalis.com] 
Sent: 05 August 2016 09:58
To: spectrum <spectrum@listserv.unc.edu>
Subject: RE: [spectrum] SPECTRUM without Ping?
 
There?s an option in discovery to not ping before trying SNMP poll ? works 
OK. We have this policy on a couple of high-security customers and around 
some of our own environment.
 
With regards to devices already discovered, SNMP polling is always first 
anyway, so normal operation shouldn?t be affected.  The only thing is on a 
?CONTACT LOST TO DEVICE? alarm, the ?are you there yet?? pings every 60 
seconds or so obviously won?t work, so it could be up to one or two poll 
cycles before the alarm clears.
 
Dave
 
*** ADVANCE NOTICE ***
*** I WILL BE ON ANNUAL LEAVE FROM AUGUST 15th THRU AUGUST 19TH INCLUSINVE 
***
David K. Game
Infrastructure Management Systems Consultant
Logicalis UK Ltd
 
110 Buckingham Avenue, Slough, Berkshire, SL1 4PF

Logicalis Optimal Network Insight
How future-ready is your network? Find out more
_ 
 
From: Christian Fieres [mailto:c.fie...@mainova.de] 
Sent: 05 August 2016 09:31
To: spectrum <spectrum@listserv.unc.edu>
Subject: [spectrum] SPECTRUM without Ping?
 
Hi all,

rumour has it our security policy leads to all our servers being prevented 
from answering ICMP echo requests soon. As it so happens, we as network 
management specialists have never been asked about implications of such a 
decision. ;-) Hopefully it stays a rumour, but you never know - so I'd 
like to be prepared.

Easy question, although I assume I know the answer: Has anybody ever tried 
to come up with a (simple) solution to obsolete ICMP in regards to 
SPECTRUM management? I am not talking about SPM tests to those servers as 
a replacement, it is mandatory to continue using SNMPv3 for RFC2790 stuff 
et cetera.

Best regards,
Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de

Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach, 
Lothar Herbst
Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB 
7173 - USt-IdNr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung
--To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum david.g...@uk.logicalis.com 

Please be aware that Logicalis UK Ltd may monitor email traffic data

Re: [spectrum] SPECTRUM without Ping?

[Vilius Benetis]

What about to put a firewall to block icmp from spectrum to restricted devices?

-vilius

> On 05 Aug 2016, at 12:14, Stephen Warne <stephenwa...@karelia-ns.com> wrote:
> 
> Hi David and Christian
> I think that Christian’s requirement might be that Spectrum never pings 
> devices to keep the security team off his back?
> I am not aware of any way to prevent spectrum attempting to ping after snmp 
> contact failures but would be very interested if you or others know a way of 
> changing this default behaviour.
> Regards
> Stephen.
>  
> From: David Game [mailto:david.g...@uk.logicalis.com] 
> Sent: 05 August 2016 09:58
> To: spectrum <spectrum@listserv.unc.edu>
> Subject: RE: [spectrum] SPECTRUM without Ping?
>  
> There’s an option in discovery to not ping before trying SNMP poll – works 
> OK. We have this policy on a couple of high-security customers and around 
> some of our own environment.
>  
> With regards to devices already discovered, SNMP polling is always first 
> anyway, so normal operation shouldn’t be affected.  The only thing is on a 
> “CONTACT LOST TO DEVICE” alarm, the “are you there yet?” pings every 60 
> seconds or so obviously won’t work, so it could be up to one or two poll 
> cycles before the alarm clears.
>  
> Dave
>  
> *** ADVANCE NOTICE ***
> *** I WILL BE ON ANNUAL LEAVE FROM AUGUST 15th THRU AUGUST 19TH INCLUSINVE ***
> David K. Game
> Infrastructure Management Systems Consultant
> Logicalis UK Ltd
>  
> 110 Buckingham Avenue, Slough, Berkshire, SL1 4PF
> 
> Logicalis Optimal Network Insight
> How future-ready is your network? Find out more
> _
>  
> From: Christian Fieres [mailto:c.fie...@mainova.de] 
> Sent: 05 August 2016 09:31
> To: spectrum <spectrum@listserv.unc.edu>
> Subject: [spectrum] SPECTRUM without Ping?
>  
> Hi all,
> 
> rumour has it our security policy leads to all our servers being prevented 
> from answering ICMP echo requests soon. As it so happens, we as network 
> management specialists have never been asked about implications of such a  
> decision. ;-) Hopefully it stays a rumour, but you never know - so I'd like 
> to be prepared.
> 
> Easy question, although I assume I know the answer: Has anybody ever tried to 
> come up with a (simple) solution to obsolete ICMP in regards to SPECTRUM 
> management? I am not talking about SPM tests to those servers as a 
> replacement, it is mandatory to continue using SNMPv3 for RFC2790 stuff et 
> cetera.
> 
> Best regards,
> Christian Fieres
> 
> Mainova AG
> Sachgebiet Netz- und Infrastruktur (M3-ST4)
> Teamleiter Service Operation Center
> Solmsstraße 38
> 60623 Frankfurt am Main
> 
> Telefon 069 213 23617
> Mobil 0170 5601563
> Telefax 069 213 9623617
> E-Mail c.fie...@mainova.de
> Internet http://www.mainova.de
> 
> Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
> Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
> Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach, 
> Lothar Herbst
> Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB 
> 7173 - USt-IdNr. DE 114184034
> 
> 
> Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
> Energie - mit Auszeichnung!
> Mehr Infos unter: http://www.mainova.de/auszeichnung
> --To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
> unsubscribe spectrum david.g...@uk.logicalis.com
> 
> Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
> email content for security purposes.
> __
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please visit http://www.symanteccloud.com
> __
> 
> This email communication does not create or vary any contractual relationship 
> between Logicalis and you. Internet communications are not secure and 
> accordingly Logicalis does not accept any legal liability for the contents of 
> this message. The contents of this email are confidential to the intended 
> recipient at the email address to which it has been addressed. It may not be 
> disclosed to or used by anyone other than this addressee, nor may it be 
> copied in any way. If received in error, please contact Logicalis on the 
> above switchboard number quoting the name of the sender and the addressee and 
> then delete it from your system. Please note that neither Logicalis nor the 
> sender accepts any responsibility for viruses and it

RE: Antwort: RE: [spectrum] SPECTRUM without Ping?

[David Game]

For ping-only devices, you're screwed!  Basically :)

This is a case of security being a bit over-zealous.  You could always request 
that ping be allowed solely from Spectrum and nowhere else. If they refuse, 
then you just have to go back to the business and state "I can't monitor the 
status of these devices at all.  What are you going to do about it.  
Alternatively, if you are allowed SDC through firewalls, you can manage ping 
only across security zones that way.

Dave

*** ADVANCE NOTICE ***
*** I WILL BE ON ANNUAL LEAVE FROM AUGUST 15th THRU AUGUST 19TH INCLUSINVE ***
David K. Game
Infrastructure Management Systems Consultant
Logicalis UK Ltd

110 Buckingham Avenue, Slough, Berkshire, SL1 4PF

Logicalis Optimal Network Insight
How future-ready is your network? Find out 
more<http://www.uk.logicalis.com/solutions-and-services/optimal-network-insight/>
_

From: Christian Fieres [mailto:c.fie...@mainova.de]
Sent: 05 August 2016 10:15
To: spectrum <spectrum@listserv.unc.edu>
Subject: Antwort: RE: [spectrum] SPECTRUM without Ping?

That's a surprise! Is that a per-model parameter? If not, what about Pingable 
Devices?

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de<mailto:c.fie...@mainova.de>
Internet http://www.mainova.de<http://www.mainova.de/>




Von:David Game 
<david.g...@uk.logicalis.com<mailto:david.g...@uk.logicalis.com>>
An:"spectrum" 
<spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Datum:    05.08.2016 10:58
Betreff:RE: [spectrum] SPECTRUM without Ping?




There's an option in discovery to not ping before trying SNMP poll - works OK. 
We have this policy on a couple of high-security customers and around some of 
our own environment.

With regards to devices already discovered, SNMP polling is always first 
anyway, so normal operation shouldn't be affected.  The only thing is on a 
"CONTACT LOST TO DEVICE" alarm, the "are you there yet?" pings every 60 seconds 
or so obviously won't work, so it could be up to one or two poll cycles before 
the alarm clears.

Dave

*** ADVANCE NOTICE ***
*** I WILL BE ON ANNUAL LEAVE FROM AUGUST 15th THRU AUGUST 19TH INCLUSINVE ***
David K. Game
Infrastructure Management Systems Consultant
Logicalis UK Ltd

110 Buckingham Avenue, Slough, Berkshire, SL1 4PF

Logicalis Optimal Network Insight
How future-ready is your network? Find out 
more<http://www.uk.logicalis.com/solutions-and-services/optimal-network-insight/>
_

From: Christian Fieres [mailto:c.fie...@mainova.de]
Sent: 05 August 2016 09:31
To: spectrum <spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Subject: [spectrum] SPECTRUM without Ping?

Hi all,

rumour has it our security policy leads to all our servers being prevented from 
answering ICMP echo requests soon. As it so happens, we as network management 
specialists have never been asked about implications of such a  decision. ;-) 
Hopefully it stays a rumour, but you never know - so I'd like to be prepared.

Easy question, although I assume I know the answer: Has anybody ever tried to 
come up with a (simple) solution to obsolete ICMP in regards to SPECTRUM 
management? I am not talking about SPM tests to those servers as a replacement, 
it is mandatory to continue using SNMPv3 for RFC2790 stuff et cetera.

Best regards,
Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de<mailto:c.fie...@mainova.de>
Internet http://www.mainova.de<http://www.mainova.de/>

Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach, 
Lothar Herbst
Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB 7173 
- USt-IdNr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edu<mailto:lists...@unc.edu>with the body: unsubscribe spectrum 
david.g...@uk.logicalis.com<mailto:david.g...@uk.logicalis.com>

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.
__
This email h

RE: [spectrum] SPECTRUM without Ping?

[Stephen Warne]

Hi David and Christian
I think that Christian's requirement might be that Spectrum never pings devices 
to keep the security team off his back?
I am not aware of any way to prevent spectrum attempting to ping after snmp 
contact failures but would be very interested if you or others know a way of 
changing this default behaviour.
Regards
Stephen.

From: David Game [mailto:david.g...@uk.logicalis.com]
Sent: 05 August 2016 09:58
To: spectrum <spectrum@listserv.unc.edu>
Subject: RE: [spectrum] SPECTRUM without Ping?

There's an option in discovery to not ping before trying SNMP poll - works OK. 
We have this policy on a couple of high-security customers and around some of 
our own environment.

With regards to devices already discovered, SNMP polling is always first 
anyway, so normal operation shouldn't be affected.  The only thing is on a 
"CONTACT LOST TO DEVICE" alarm, the "are you there yet?" pings every 60 seconds 
or so obviously won't work, so it could be up to one or two poll cycles before 
the alarm clears.

Dave

*** ADVANCE NOTICE ***
*** I WILL BE ON ANNUAL LEAVE FROM AUGUST 15th THRU AUGUST 19TH INCLUSINVE ***
David K. Game
Infrastructure Management Systems Consultant
Logicalis UK Ltd

110 Buckingham Avenue, Slough, Berkshire, SL1 4PF

Logicalis Optimal Network Insight
How future-ready is your network? Find out 
more<http://www.uk.logicalis.com/solutions-and-services/optimal-network-insight/>
_

From: Christian Fieres [mailto:c.fie...@mainova.de]
Sent: 05 August 2016 09:31
To: spectrum <spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Subject: [spectrum] SPECTRUM without Ping?

Hi all,

rumour has it our security policy leads to all our servers being prevented from 
answering ICMP echo requests soon. As it so happens, we as network management 
specialists have never been asked about implications of such a  decision. ;-) 
Hopefully it stays a rumour, but you never know - so I'd like to be prepared.

Easy question, although I assume I know the answer: Has anybody ever tried to 
come up with a (simple) solution to obsolete ICMP in regards to SPECTRUM 
management? I am not talking about SPM tests to those servers as a replacement, 
it is mandatory to continue using SNMPv3 for RFC2790 stuff et cetera.

Best regards,
Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de<mailto:c.fie...@mainova.de>
Internet http://www.mainova.de<http://www.mainova.de/>

Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach, 
Lothar Herbst
Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB 7173 
- USt-IdNr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edu<mailto:lists...@unc.edu> with the body: unsubscribe spectrum 
david.g...@uk.logicalis.com<mailto:david.g...@uk.logicalis.com>

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.
__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
__

This email communication does not create or vary any contractual relationship 
between Logicalis and you. Internet communications are not secure and 
accordingly Logicalis does not accept any legal liability for the contents of 
this message. The contents of this email are confidential to the intended 
recipient at the email address to which it has been addressed. It may not be 
disclosed to or used by anyone other than this addressee, nor may it be copied 
in any way. If received in error, please contact Logicalis on the above 
switchboard number quoting the name of the sender and the addressee and then 
delete it from your system. Please note that neither Logicalis nor the sender 
accepts any responsibility for viruses and it is your responsibility to scan 
the email and attachments (if any).

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.

Logicalis UK Ltd, Registered in England and Wales No: 3732397, Registered 
Office: 110 Buckingham Avenue, Slough. Berkshire, SL1 4PF

__
This email has been scanned by the Symantec 

Antwort: RE: [spectrum] SPECTRUM without Ping?

[Christian Fieres]

That's a surprise! Is that a per-model parameter? If not, what about 
Pingable Devices?

Freundliche Grüße

Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de




Von:David Game <david.g...@uk.logicalis.com>
An: "spectrum" <spectrum@listserv.unc.edu>
Datum:  05.08.2016 10:58
Betreff:    RE: [spectrum] SPECTRUM without Ping?



There?s an option in discovery to not ping before trying SNMP poll ? works 
OK. We have this policy on a couple of high-security customers and around 
some of our own environment.
 
With regards to devices already discovered, SNMP polling is always first 
anyway, so normal operation shouldn?t be affected.  The only thing is on a 
?CONTACT LOST TO DEVICE? alarm, the ?are you there yet?? pings every 60 
seconds or so obviously won?t work, so it could be up to one or two poll 
cycles before the alarm clears.
 
Dave
 
*** ADVANCE NOTICE ***
*** I WILL BE ON ANNUAL LEAVE FROM AUGUST 15th THRU AUGUST 19TH INCLUSINVE 
***
David K. Game
Infrastructure Management Systems Consultant
Logicalis UK Ltd
 
110 Buckingham Avenue, Slough, Berkshire, SL1 4PF

Logicalis Optimal Network Insight
How future-ready is your network? Find out more
_ 
 
From: Christian Fieres [mailto:c.fie...@mainova.de] 
Sent: 05 August 2016 09:31
To: spectrum <spectrum@listserv.unc.edu>
Subject: [spectrum] SPECTRUM without Ping?
 
Hi all,

rumour has it our security policy leads to all our servers being prevented 
from answering ICMP echo requests soon. As it so happens, we as network 
management specialists have never been asked about implications of such a 
decision. ;-) Hopefully it stays a rumour, but you never know - so I'd 
like to be prepared.

Easy question, although I assume I know the answer: Has anybody ever tried 
to come up with a (simple) solution to obsolete ICMP in regards to 
SPECTRUM management? I am not talking about SPM tests to those servers as 
a replacement, it is mandatory to continue using SNMPv3 for RFC2790 stuff 
et cetera.

Best regards,
Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de

Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach, 
Lothar Herbst
Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB 
7173 - USt-IdNr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung
--To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum david.g...@uk.logicalis.com 

Please be aware that Logicalis UK Ltd may monitor email traffic data and 
also email content for security purposes.
__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
__

This email communication does not create or vary any contractual 
relationship between Logicalis and you. Internet communications are not 
secure and accordingly Logicalis does not accept any legal liability for 
the contents of this message. The contents of this email are confidential 
to the intended recipient at the email address to which it has been 
addressed. It may not be disclosed to or used by anyone other than this 
addressee, nor may it be copied in any way. If received in error, please 
contact Logicalis on the above switchboard number quoting the name of the 
sender and the addressee and then delete it from your system. Please note 
that neither Logicalis nor the sender accepts any responsibility for 
viruses and it is your responsibility to scan the email and attachments 
(if any).

Please be aware that Logicalis UK Ltd may monitor email traffic data and 
also email content for security purposes.

Logicalis UK Ltd, Registered in England and Wales No: 3732397, Registered 
Office: 110 Buckingham Avenue, Slough. Berkshire, SL1 4PF 

__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
__
--To unsubscribe from spectrum, send email to lists...@unc.edu with the

RE: [spectrum] SPECTRUM without Ping?

[David Game]

There's an option in discovery to not ping before trying SNMP poll - works OK. 
We have this policy on a couple of high-security customers and around some of 
our own environment.

With regards to devices already discovered, SNMP polling is always first 
anyway, so normal operation shouldn't be affected.  The only thing is on a 
"CONTACT LOST TO DEVICE" alarm, the "are you there yet?" pings every 60 seconds 
or so obviously won't work, so it could be up to one or two poll cycles before 
the alarm clears.

Dave

*** ADVANCE NOTICE ***
*** I WILL BE ON ANNUAL LEAVE FROM AUGUST 15th THRU AUGUST 19TH INCLUSINVE ***
David K. Game
Infrastructure Management Systems Consultant
Logicalis UK Ltd

110 Buckingham Avenue, Slough, Berkshire, SL1 4PF

Logicalis Optimal Network Insight
How future-ready is your network? Find out 
more
_

From: Christian Fieres [mailto:c.fie...@mainova.de]
Sent: 05 August 2016 09:31
To: spectrum 
Subject: [spectrum] SPECTRUM without Ping?

Hi all,

rumour has it our security policy leads to all our servers being prevented from 
answering ICMP echo requests soon. As it so happens, we as network management 
specialists have never been asked about implications of such a  decision. ;-) 
Hopefully it stays a rumour, but you never know - so I'd like to be prepared.

Easy question, although I assume I know the answer: Has anybody ever tried to 
come up with a (simple) solution to obsolete ICMP in regards to SPECTRUM 
management? I am not talking about SPM tests to those servers as a replacement, 
it is mandatory to continue using SNMPv3 for RFC2790 stuff et cetera.

Best regards,
Christian Fieres

Mainova AG
Sachgebiet Netz- und Infrastruktur (M3-ST4)
Teamleiter Service Operation Center
Solmsstraße 38
60623 Frankfurt am Main

Telefon 069 213 23617
Mobil 0170 5601563
Telefax 069 213 9623617
E-Mail c.fie...@mainova.de
Internet http://www.mainova.de

Mainova Aktiengesellschaft - Solmsstraße 38 - D-60623 Frankfurt am Main
Vorsitzender des Aufsichtsrates: Bürgermeister Uwe Becker
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Norbert Breidenbach, 
Lothar Herbst
Sitz der Aktiengesellschaft: Frankfurt am Main - Amtsgericht Frankfurt HRB 7173 
- USt-IdNr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edu with the body: unsubscribe spectrum 
david.g...@uk.logicalis.com

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.
__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
__

This email communication does not create or vary any contractual relationship 
between Logicalis and you. Internet communications are not secure and 
accordingly Logicalis does not accept any legal liability for the contents of 
this message. The contents of this email are confidential to the intended 
recipient at the email address to which it has been addressed. It may not be 
disclosed to or used by anyone other than this addressee, nor may it be copied 
in any way. If received in error, please contact Logicalis on the above 
switchboard number quoting the name of the sender and the addressee and then 
delete it from your system. Please note that neither Logicalis nor the sender 
accepts any responsibility for viruses and it is your responsibility to scan 
the email and attachments (if any).

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.

Logicalis UK Ltd,  Registered in England and Wales No: 3732397,  Registered 
Office: 110 Buckingham Avenue, Slough. Berkshire, SL1 4PF 

__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
__
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE:[spectrum] spectrum digest: July 26, 2016

[Markus Speer]

Ich bin bis So 14.08.2016 nicht im Büro.

Ihre Mail wird in dieser Zeit nicht bearbeitet und auch nicht
weitergeleitet.
In dringenden Fällen wenden Sie sich in dieser Zeit bitte an einen meiner
Kollegen oder unser NOC (n...@uni-muenster.de, Tel 0251/83-31500).


smime.p7s
Description: S/MIME cryptographic signature

RE:[spectrum] Spectrum 10.1.1 release ?

[Stephen Warne]

Last I heard it had been delayed and no new date announced.

From: Murtey, Patrick [mailto:pmur...@mgmresorts.com]
Sent: 16 March 2016 22:02
To: spectrum 
Subject: [spectrum] Spectrum 10.1.1 release ?

Hi All,
Anybody know when Spectrum 10.1.1 will be released?

Thanks
Patrick


  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edu with the body: unsubscribe spectrum 
stephenwa...@karelia-ns.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum 10.0 / 10.1

[David Game]

We're running 10.0 in a production environment with no major issues so far. 
We're using 2012 R2 servers hardened to CIS guidelines as well.  Only thing I 
had to do to make the install work was to manually disable UAC in the Local 
Security Policy. It can be re-enabled after installation.

Dave

David K. Game
Infrastructure Management Systems Consultant
Logicalis UK Ltd

110 Buckingham Avenue, Slough, Berkshire, SL1 4PF

Logicalis Optimal Network Insight
How future-ready is your network? Find out more
_ 

-Original Message-
From: Jon Magnus Dullerud [mailto:dulle...@gmail.com] 
Sent: 18 January 2016 17:14
To: spectrum 
Subject: [spectrum] Spectrum 10.0 / 10.1

Hi all.
I am wondering if anyone have any experience with spectrum ver 10.0 or 10.1 
regarding stability, any other issues issues?

I am not sure if its stabile enough to run any of them in a production 
environment?

Best Regards
Jon Magnus Dullerud
Norwegian Defence.
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum david.g...@uk.logicalis.com

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.
__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com 
__

This email communication does not create or vary any contractual relationship 
between Logicalis and you. Internet communications are not secure and 
accordingly Logicalis does not accept any legal liability for the contents of 
this message. The contents of this email are confidential to the intended 
recipient at the email address to which it has been addressed. It may not be 
disclosed to or used by anyone other than this addressee, nor may it be copied 
in any way. If received in error, please contact Logicalis on the above 
switchboard number quoting the name of the sender and the addressee and then 
delete it from your system. Please note that neither Logicalis nor the sender 
accepts any responsibility for viruses and it is your responsibility to scan 
the email and attachments (if any).

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.

Logicalis UK Ltd,  Registered in England and Wales No: 3732397,  Registered 
Office: 110 Buckingham Avenue, Slough. Berkshire, SL1 4PF 

__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
__

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum License count

[Barnes, William]

Amitay,
Spectrum doesn’t enforce the expiration date, but many people have licenses 
that track the number of devices that they have modeled.  The license tracking 
goes by the number of accountable models.  There is no way to tell how many you 
have left.  What you have to do is to look at the number of accountable models, 
which is an attribute on your VNM and subtract that from your negotiated 
license.
Bill

From: Amitay Ben-ishay 
<amitay.ben-is...@orange.co.il<mailto:amitay.ben-is...@orange.co.il>>
Reply-To: Amitay Ben-ishay 
<amitay.ben-is...@orange.co.il<mailto:amitay.ben-is...@orange.co.il>>
Date: Monday, January 11, 2016 at 7:52 AM
To: spectrum <spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Subject: RE: [spectrum] Spectrum License count

As I know from the latest versions, spectrum no longer force the licvense.

Best Regards, Amitay.
__

From: ro...@petrobras.com.br<mailto:ro...@petrobras.com.br> 
[mailto:ro...@petrobras.com.br]
Sent: Wednesday, January 06, 2016 5:50 PM
To: spectrum
Cc: spectrum
Subject: Re: [spectrum] Spectrum License count


 Kavi,

Good question. I think the Spectrum does not keeps a remaining licence count, 
at least for my installation.

Roger


[Inactive hide details for "kavi arasu" ---06/01/2016 12:42:57---Hi All, How 
can i get the total license count in Spectrum. I go]"kavi arasu" ---06/01/2016 
12:42:57---Hi All, How can i get the total license count in Spectrum. I got 
only total accountable device. How

De: "kavi arasu" <kaviaras...@gmail.com<mailto:kaviaras...@gmail.com>>
Para: "spectrum" <spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Data: 06/01/2016 12:42
Assunto: [spectrum] Spectrum License count





Hi All,

How can i get the total license count in Spectrum. I got only total accountable 
device. How should i view the remaining license count.

Thanks,
Kavi
---
To unsubscribe from spectrum, send email to 
lists...@unc.edu<mailto:lists...@unc.edu> with the body: unsubscribe spectrum 
ro...@petrobras.com.br<mailto:ro...@petrobras.com.br>




"O emitente desta mensagem ? respons?vel por seu conte?do e endere?amento. Cabe 
ao destinat?rio cuidar quanto ao tratamento adequado. Sem a devida autoriza??o, 
a divulga??o, a reprodu??o, a distribui??o ou qualquer outra a??o em 
desconformidade com as normas internas do Sistema Petrobras s?o proibidas e 
pass?veis de san??o disciplinar, c?vel e criminal."



"The sender of this message is responsible for its content and addressing. The 
receiver shall take proper care of it. Without due authorization, the 
publication, reproduction, distribution or the performance of any other action 
not conforming to Petrobras System internal policies and procedures is 
forbidden and liable to disciplinary, civil or criminal sanctions."



"El emisor de este mensaje es responsable por su contenido y direccionamiento. 
Cabe al destinatario darle el tratamiento adecuado. Sin la debida autorizaci?n, 
su divulgaci?n, reproducci?n, distribuci?n o cualquier otra acci?n no conforme 
a las normas internas del Sistema Petrobras est?n prohibidas y ser?n pasibles 
de sanci?n disciplinaria, civil y penal."

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edu<mailto:lists...@unc.edu> with the body: unsubscribe spectrum 
amitay.ben-is...@orange.co.il<mailto:amitay.ben-is...@orange.co.il>


This message contains information that may be confidential or privileged.
If you are not the intended recipient, you may not use, copy or disclose
to anyone any of the information in this message. If you have received
this message and are not the intended recipient, kindly notify the sender
and delete this message from your computer.

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edu<mailto:lists...@unc.edu> with the body: unsubscribe spectrum 
william_bar...@cable.comcast.com<mailto:william_bar...@cable.comcast.com>

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum License count

[Amitay Ben-ishay]

As I know from the latest versions, spectrum no longer force the licvense.

Best Regards, Amitay.
__

From: ro...@petrobras.com.br [mailto:ro...@petrobras.com.br]
Sent: Wednesday, January 06, 2016 5:50 PM
To: spectrum
Cc: spectrum
Subject: Re: [spectrum] Spectrum License count


 Kavi,

Good question. I think the Spectrum does not keeps a remaining licence count, 
at least for my installation.

Roger


[Inactive hide details for "kavi arasu" ---06/01/2016 12:42:57---Hi All, How 
can i get the total license count in Spectrum. I go]"kavi arasu" ---06/01/2016 
12:42:57---Hi All, How can i get the total license count in Spectrum. I got 
only total accountable device. How

De: "kavi arasu" <kaviaras...@gmail.com<mailto:kaviaras...@gmail.com>>
Para: "spectrum" <spectrum@listserv.unc.edu<mailto:spectrum@listserv.unc.edu>>
Data: 06/01/2016 12:42
Assunto: [spectrum] Spectrum License count





Hi All,

How can i get the total license count in Spectrum. I got only total accountable 
device. How should i view the remaining license count.

Thanks,
Kavi
---
To unsubscribe from spectrum, send email to 
lists...@unc.edu<mailto:lists...@unc.edu> with the body: unsubscribe spectrum 
ro...@petrobras.com.br<mailto:ro...@petrobras.com.br>




"O emitente desta mensagem ? respons?vel por seu conte?do e endere?amento. Cabe 
ao destinat?rio cuidar quanto ao tratamento adequado. Sem a devida autoriza??o, 
a divulga??o, a reprodu??o, a distribui??o ou qualquer outra a??o em 
desconformidade com as normas internas do Sistema Petrobras s?o proibidas e 
pass?veis de san??o disciplinar, c?vel e criminal."



"The sender of this message is responsible for its content and addressing. The 
receiver shall take proper care of it. Without due authorization, the 
publication, reproduction, distribution or the performance of any other action 
not conforming to Petrobras System internal policies and procedures is 
forbidden and liable to disciplinary, civil or criminal sanctions."



"El emisor de este mensaje es responsable por su contenido y direccionamiento. 
Cabe al destinatario darle el tratamiento adecuado. Sin la debida autorizaci?n, 
su divulgaci?n, reproducci?n, distribuci?n o cualquier otra acci?n no conforme 
a las normas internas del Sistema Petrobras est?n prohibidas y ser?n pasibles 
de sanci?n disciplinaria, civil y penal."

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edu<mailto:lists...@unc.edu> with the body: unsubscribe spectrum 
amitay.ben-is...@orange.co.il<mailto:amitay.ben-is...@orange.co.il>

This message contains information that may be confidential or privileged.
If you are not the intended recipient, you may not use, copy or disclose
to anyone any of the information in this message. If you have received
this message and are not the intended recipient, kindly notify the sender
and delete this message from your computer.

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum License count

[roger]

 Kavi,

Good question. I think the Spectrum does not keeps a remaining licence
count, at least for my installation.

Roger




De: "kavi arasu" 
Para:   "spectrum" 
Data:   06/01/2016 12:42
Assunto:[spectrum] Spectrum License count



Hi All,

How can i get the total license count in Spectrum. I got only total
accountable device. How should i view the remaining license count.

Thanks,
Kavi
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body:
unsubscribe spectrum ro...@petrobras.com.br
 
"O emitente desta mensagem é responsável por seu conteúdo e endereçamento. Cabe 
ao destinatário cuidar quanto ao tratamento adequado. Sem a devida autorização, 
a divulgação, a reprodução, a distribuição ou qualquer outra ação em 
desconformidade com as normas internas do Sistema Petrobras são proibidas e 
passíveis de sanção disciplinar, cível e criminal."
 
"The sender of this message is responsible for its content and addressing. The 
receiver shall take proper care of it. Without due authorization, the 
publication, reproduction, distribution or the performance of  any other action 
not conforming to Petrobras System internal policies and procedures is 
forbidden and liable to disciplinary, civil or criminal sanctions."
 
"El emisor de este mensaje es responsable por su contenido y direccionamiento. 
Cabe al destinatario darle el tratamiento adecuado. Sin la debida autorización, 
su divulgación, reproducción, distribución o cualquier otra acción no conforme 
a las normas internas del Sistema Petrobras están prohibidas y serán pasibles 
de sanción disciplinaria, civil y penal."

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum topology applet in Smart tv

[Stephen Warne]

Hi Kavi
I'm not totally up to date on Smart TVs but it is my understanding that the 
majority or even all of them have cut down browsers which don't support Java.
Regards
Stephen.

-Original Message-
From: kavi arasu [mailto:kaviaras...@gmail.com] 
Sent: 04 June 2015 16:12
To: spectrum
Subject: [spectrum] Spectrum topology applet in Smart tv

Hi All,

Had any one tried launching topology on the smart tv via topology applet web 
link.

I tried, but getting blank page due to JRE. Is there a way to display topology 
on smart tv.

Thanks,
Kavi
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum stephenwa...@karelia-ns.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum topology applet in Smart tv

[Jon Magnus Dullerud]

Hi.
I got it working, I you need java, and you have to authenticate.
Do you get it working in Ie or another browser, it is very slow, takes a long 
time to bring up a view.

Best Regards
Jon Magnus Dullerud
Nor CyDef, Cyber Services and Operations (Norwegian CyberDefence) 


 4. jun. 2015 kl. 17.11 skrev kavi arasu kaviaras...@gmail.com:
 
 Hi All,
 
 Had any one tried launching topology on the smart tv via topology applet web 
 link.
 
 I tried, but getting blank page due to JRE. Is there a way to display 
 topology on smart tv.
 
 Thanks,
 Kavi
 ---
 To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
 unsubscribe spectrum dulle...@gmail.com


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE:[spectrum] Spectrum 9.2.3.PTF_H0301 is released and available for download

[Cantwell, Rene D]

Correction - PTF_H1301 not H0301.


From: Cantwell, Rene D
Sent: Tuesday, March 10, 2015 2:06 PM
To: 'spectrum'
Subject: Spectrum 9.2.3.PTF_H0301 is released and available for download

Apologizes in my delay in getting this notification out.

Spectrum PTF patch 9.2.3.PTF_H0301 is released and available for download.

The download is available from the Spectrum Solutions  Patches Index at CA 
Spectrum Infrastructure Manager r9.2 Solutions  Patches - CA 
Technologieshttp://www.ca.com/us/support/ca-support-online/product-content/recommended-reading/technical-document-index/ca-spectrum-infrastructure-manager-r92-solutions-patches.aspx
 or this ftp link  
ftp://ftp.ca.com/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.03.PTF_H1301 .

Details of what is included in 9.2.3.PTF_H0301 are documented in the 
ReleaseNote.PTF_H1301.txt file located at the ftp link above, as well as in the 
knowledgebase doc TEC1651784 
http://www.ca.com/us/support/ca-support-online/product-content/knowledgebase-articles/TEC1651784.aspx
 Which CA Spectrum 9.2.3.H12 PTF patches are included in 9.2.3.H13?


--
Rene'

Rene' Cantwell
CA Technologies
Support Delivery Manager
603-334-2497
rene.cantw...@ca.commailto:rene.cantw...@ca.com


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum Config Comparison

[Jon Magnus Dullerud]

Hi.
In the $SPECROOT/tomcat/webapps/spectrum/ there is a diff.applet file.
Take a look at that, dont know how it works, but i suspect it has something 
with configs to do.

/jon magnus

 
 27. jan. 2015 kl. 14.07 skrev kavi arasu kaviaras...@gmail.com:
 
 Hi All,
 
 Does any one know how spectrum compares the configuration and highlights the 
 differences like added lines removed lines and changed lines.
 
 Is that done by any perl file?. If so, please provide me the file responsible 
 for it.
 
 Thanks,
 Kavi
 ---
 To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
 unsubscribe spectrum dulle...@gmail.com


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE:[spectrum] Spectrum 9.3 Installation Problem

[Tugrul Gurkaynak | SUPERCOM]

Hello,

I've encountered same problem and find out it was due to windows installation 
locale. Can't remember what was the exact reason, but it was something about 
either decimal separator dot/comma difference or some bug due to Turkish 
uppercase i difference.

Please try reinstalling windows with leaving both Language to install and 
Time and currency format as the default English (United States)

you can select any Keyboard or input method as you wish, though.

that worked for me


have a nice day
Tuğrul Gürkaynak


From: spectrum@listserv.unc.edu [spectrum@listserv.unc.edu] on behalf of Mehmet 
HAZIROL [mehmet.hazi...@arkas.com.tr]
Sent: Friday, September 19, 2014 12:10 AM
To: spectrum
Subject: [spectrum] Spectrum 9.3 Installation Problem

Dear all,
I downloaded Spectrum 9.3 and OneClick from support. I want to try install them 
to seperate servers. Spectrum installation finished succesfully, log out and 
login after installation. When I want to start Spectroserver on Spectrum 
Control panel, I get an error message like below while . I check server specs 
for requiremets and there is no problem about them.
How can I pass this error?

[cid:image003.jpg@01CFD39E.284619D0]

Also, which steps of installation I will insert license information? There is 
no screen that ask me license information.

Regards

Mehmet Uğur HAZIROL
Arkas Holding S.A.
Network Support Specialist
Phone: 0090 (0232) 477 
Fax : 0090 (0232) 411 
E-Mail: mehmet.hazi...@arkas.com.trmailto:mehmet.hazi...@arkas.com.tr
www.arkas.com.trhttp://www.arkas.com.tr/


  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
tugrul.gurkay...@supercom.com.tr
YASAL UYARI / DISCLAIMER
Bu mesajda, Yalnızca muhatabını ilgilendiren, kişiye veya kuruma özel bilgiler 
yer alıyor olabilir. Mesajin muhatabı değilseniz,içeriğini ve varsa ekindeki 
dosyaları kimseye aktarmayınız ya da kopyalamayınız. Böyle bir durumda lütfen 
göndereni uyarıp, mesaji imha ediniz. Şirketimiz bu mesajın içerdiği bilgilerin 
doğruluğu veya eksiksiz olduğu konusunda herhangi bir garanti vermemektedir. Bu 
nedenle bu bilgilerin ne şekilde olursa olsun içeriğinden, 
iletilmesinden,alınmasından ve saklanmasından sorumlu değildir. Bu mesajdaki 
görüşler yalnızca gönderen kişiye aittir ve şirketimizin görüşlerini 
yansıtmayabilir. Göstermiş olduğunuz hassasiyetten ötürü teşekkür ederiz.

The information contained in this e-mail, including any attachments, is 
confidential and intended solely for the individual(s) stated in this message. 
If you are not the intended recipient, please notify the sender and destroy 
this message. The company shall have no liability for content, accuracy, 
transmission,reception, storage, loss of integrity and confidentiality of this 
message,contained viruses and any damages caused in any way to your computer 
system or use of such in any way whatsoever. Any opinions expressed in this 
message and its attachments are those of the author and may not necessarily 
reflect the opinions of the company.
[http://www.supercom.com.tr/img/uploads/kagit_basma.jpg]

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum 9.3 Installation Problem

[Christian Schneider]

Hi,

As of 9.3 you will no longer need to provide a license key. This part is ok. I 
would try to install again over it.

Regards

Christian Schneider
Enterprise Service Specialist

4-tune GmbH
Sägereistrasse 33
CH-8152 Glattbrugg

Tel   +41 71 930 07 00
Fax  +41 71 930 07 01
Mob +41 79 418 45 42
Mail christian.schnei...@4-tune.ch

 Am 18.09.2014 um 23:10 schrieb Mehmet HAZIROL mehmet.hazi...@arkas.com.tr:
 
 Dear all,
 I downloaded Spectrum 9.3 and OneClick from support. I want to try install 
 them to seperate servers. Spectrum installation finished succesfully, log out 
 and login after installation. When I want to start Spectroserver on Spectrum 
 Control panel, I get an error message like below while . I check server specs 
 for requiremets and there is no problem about them.
 How can I pass this error?
  
 image003.jpg
  
 Also, which steps of installation I will insert license information? There is 
 no screen that ask me license information.
  
 Regards
  
 Mehmet Uğur HAZIROL
 Arkas Holding S.A.
 Network Support Specialist
 Phone: 0090 (0232) 477 
 Fax : 0090 (0232) 411 
 E-Mail: mehmet.hazi...@arkas.com.tr
 www.arkas.com.tr
  
 --To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
 unsubscribe spectrum christian.schnei...@4-tune.ch

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum Integration with HP Operations Manager for UNIX (OMU)

[Stephen Boshoff]

Hi There
If you get an answer to this please share it with me as well


Kind regards

Stephen Boshoff

T-Systems South Africa (Pty) Ltd
Delivery
Stephen Boshoff
Team Leader: ESM
International Business Gateway, New Road, Midrand, 1685
P O BOX 2496,Midrand,1685
+27(10)221-6353 (Phone)
+27(86)642-3243 (Fax)
+27(83)390-7700 (Mobile)
E-mail: stephen.bosh...@t-systems.co.za
http://www.t-systems.co.za
Registration Number:  1989/007547/07


-Original Message-
From: spectrum@listserv.unc.edu [mailto:spectrum@listserv.unc.edu] On Behalf Of 
kavi arasu
Sent: 16 September 2014 11:19 AM
To: spectrum
Subject: [spectrum] Spectrum Integration with HP Operations Manager for UNIX 
(OMU)

Hi All,

Please let us know whether its possible to integrate Spectrum with HP 
Operations Manager for UNIX (OMU), if yes, Please provide us the reference 
document for integrating the same.

Also, let us know whether we can get the MIB's for the same.

Regards,
Kavi
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum stephen.bosh...@t-systems.co.za


Disclaimer: This message and/or attachment(s) may contain privileged, 
confidential and/or personal information. If you are not the intended recipient 
you may not disclose or distribute any of the information contained within this 
message. In such case you must destroy this message and inform the sender of 
the error. T-Systems does not accept liability for any errors, omissions, 
information and viruses contained in the transmission of this message. Any 
opinions, conclusions and other information contained within this message not 
related to T-Systems' official business is deemed to be that of the individual 
only and is not endorsed by T-Systems.

This message and/or attachment(s) may contain privileged or confidential
 
information. If you are not the intended recipient you may not disclose or  
  
distribute any of the information contained within this message. In such
case you must destroy this message and inform the sender of the error.
T-Systems does not accept liability for any errors, omissions, information
and viruses contained in the transmission of this message. Any opinions, 
conclusions and other information contained within this message not related 
to T-Systems' official business is deemed to be that of the individual only 
and is not endorsed by T-Systems.

  
T-Systems - Business Flexibility

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE:[spectrum] Spectrum 9.3.H01 - were is it?

[Joseph POUTRE]

Roberth,

On the CA Support site go to the Support By Product page for the information, 
under Latest Knowledge Base Updates.

Joe

-
[cid:image001.gif@01CDF96F.379E9C00]
Joseph Poutre
AVP
ITIP - Production Tools
525 Washington
Jersey City
Tel : (201) 850-4179
Mobile: (917) 361-3211
joseph.pou...@us.bnpparibas.com



From: roberth.edb...@seb.se [mailto:roberth.edb...@seb.se]
Sent: Thursday, February 13, 2014 7:36 AM
To: spectrum@listserv.unc.edu
Subject: [spectrum] Spectrum 9.3.H01 - were is it?

I think I read about H01 for 9.3 was released recently, but I can't find it.
/Roberth

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
joseph.pou...@us.bnpparibas.commailto:joseph.pou...@us.bnpparibas.com


This message and any attachments (the message) is intended solely for 
the addressees and is confidential. If you receive this message in error, 
please delete it and immediately notify the sender. Any use not in accord 
with its purpose, any dissemination or disclosure, either whole or partial, 
is prohibited except formal approval. The internet can not guarantee the 
integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will) 
not therefore be liable for the message if modified. Please note that certain 
functions and services for BNP Paribas may be performed by BNP Paribas RCC, Inc.

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.png

RE:[spectrum] Spectrum Vcenter Modeling - access datacenter info in attribute

[Chandler, Bradford]

I've used the Asset Information under the Component Details, such as Tag 
(USER_AssetTag 0x12bfb) and ID (USER_AssetID) to fill in environment and owner. 
 You could also use Office (USER_AssetOffice 0x12bff) or Organization 
(USER_AssetOrganization 0x12bfe) for the data center name.

We don't use VAIM, but I'm assuming it could be used in the same way:  when a 
new server gets built, we use the web services to automatically populate these 
fields above from the information that the customer fills out including the 
data center and environment.

Brad

From: Dan Ellsweig/RYE/US [mailto:dan.ellsw...@avon.com]
Sent: Wednesday, February 12, 2014 7:22 AM
To: spectrum
Subject: [spectrum] Spectrum Vcenter Modeling - access datacenter info in 
attribute

Greetings

We are running Spectrum 9.3 and managing multiple Vcenters using the Sysedge 
VMware AIM.

My Vcenter team has done considerable work in defining data centers and 
environments within the Vcenter. The environments can be as simple as 
production, qa, or dev.

I have a need to create Global collections in Spectrum that contain just prod 
Vm's for a given datacenter.  I cannot find an attribute that has the names of 
the datacenter or environement. There are other examples of topography strings 
- LocationModelNameString, TopologyModelNameString and 
collectionsModelNameSrtring are good examples of this.

Does anyone have an idea on how to accomplish this??


[http://www.avoncompany.com/images/email/email_avon_logo.jpg]

Dan Ellsweig
IT Engineer - Enterprise Management Systems
1 Avon Plaza, Rye, New York 10580
Phone 914 935 2723
Tieline 3493 2723
Mobile 845-283-1132
dan.ellsw...@avon.commailto:dan.ellsw...@avon.com

Please consider the environment before printing


*
* --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
brad.chand...@libertymutual.commailto:brad.chand...@libertymutual.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.jpg

RE:[spectrum] Spectrum Vcenter Modeling - access datacenter info in attribute

[Dan Ellsweig/RYE/US]

The problem with this approach is it requires manual intervention for thousands 
of virtual devices - updating the asset info.

Using an attribute such as one of the namestrings defined in my OP would allow 
this information to come automatically from the Vcenter via the VAIM plugin to 
Sysedge.



[http://www.avoncompany.com/images/email/email_avon_logo.jpg]

Dan Ellsweig
IT Engineer - Enterprise Management Systems
1 Avon Plaza, Rye, New York 10580
Phone 914 935 2723
Tieline 3493 2723
Mobile 845-283-1132
dan.ellsw...@avon.com

Please consider the environment before printing



From: Chandler, Bradford [mailto:brad.chand...@libertymutual.com]
Sent: Wednesday, February 12, 2014 8:51 AM
To: Dan Ellsweig/RYE/US; spectrum
Subject: RE: Spectrum Vcenter Modeling - access datacenter info in attribute

I've used the Asset Information under the Component Details, such as Tag 
(USER_AssetTag 0x12bfb) and ID (USER_AssetID) to fill in environment and owner. 
 You could also use Office (USER_AssetOffice 0x12bff) or Organization 
(USER_AssetOrganization 0x12bfe) for the data center name.

We don't use VAIM, but I'm assuming it could be used in the same way:  when a 
new server gets built, we use the web services to automatically populate these 
fields above from the information that the customer fills out including the 
data center and environment.

Brad

From: Dan Ellsweig/RYE/US [mailto:dan.ellsw...@avon.com]
Sent: Wednesday, February 12, 2014 7:22 AM
To: spectrum
Subject: [spectrum] Spectrum Vcenter Modeling - access datacenter info in 
attribute

Greetings

We are running Spectrum 9.3 and managing multiple Vcenters using the Sysedge 
VMware AIM.

My Vcenter team has done considerable work in defining data centers and 
environments within the Vcenter. The environments can be as simple as 
production, qa, or dev.

I have a need to create Global collections in Spectrum that contain just prod 
Vm's for a given datacenter.  I cannot find an attribute that has the names of 
the datacenter or environement. There are other examples of topography strings 
- LocationModelNameString, TopologyModelNameString and 
collectionsModelNameSrtring are good examples of this.

Does anyone have an idea on how to accomplish this??


[http://www.avoncompany.com/images/email/email_avon_logo.jpg]

Dan Ellsweig
IT Engineer - Enterprise Management Systems
1 Avon Plaza, Rye, New York 10580
Phone 914 935 2723
Tieline 3493 2723
Mobile 845-283-1132
dan.ellsw...@avon.commailto:dan.ellsw...@avon.com

Please consider the environment before printing


*
* --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
brad.chand...@libertymutual.commailto:brad.chand...@libertymutual.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.jpg

RE:[spectrum] Spectrum Vcenter Modeling - access datacenter info in attribute

[Dan Ellsweig/RYE/US]

Thanks for the response..

I did something similar - did a search and added to GC - BUT what I am looking 
for is a way to use the datacenter data in a GC rule - so this GC becomes real 
time - no manual intervention. Our VM environment is dynamic enough I need to 
automate this



[http://www.avoncompany.com/images/email/email_avon_logo.jpg]

Dan Ellsweig
IT Engineer - Enterprise Management Systems
1 Avon Plaza, Rye, New York 10580
Phone 914 935 2723
Tieline 3493 2723
Mobile 845-283-1132
dan.ellsw...@avon.com

Please consider the environment before printing



From: Franck, Raphael [mailto:raphael.fra...@computacenter.com]
Sent: Wednesday, February 12, 2014 9:36 AM
To: spectrum
Subject: [spectrum] AW: Spectrum Vcenter Modeling - access datacenter info in 
attribute

Hi Dan,

basically it comes down to relational searches within OneClick, which still 
can't be defined by ourselves unfortunately.
However, there a few of them predefined, like Devices - Supports Application 
or Virtual Host Management - VMware - Virtual Machines - By Datacenter 
Name.
You might use the function to create GlobalCollections based on Locater 
searches.
Please see the attached picture as a starting point.
Beware, there is a little bug when using a list of values (e.g. a list  of 
VMware Datacenter names): once the search/Global Collection I saved and shall 
be re-edited, it will not show the previously entered list of values. But these 
values are still stored within the system, so it's mainly an issue with 
remembering what you previously entered.


Mit freundlichen Gruessen - Yours sincerely

Raphael Franck
Consultant
Group Operations Service Factory

Computacenter AG  Co oHG
Services  Solutions

Europaring 34-40, 50170 Kerpen, Germany
E-Mail: 
raphael.fra...@computacenter.commailto:raphael.fra...@computacenter.com
WWW: www.computacenter.dehttp://www.computacenter.de/

Von: Dan Ellsweig/RYE/US [mailto:dan.ellsw...@avon.com]
Gesendet: Mittwoch, 12. Februar 2014 13:22
An: spectrum
Betreff: [spectrum] Spectrum Vcenter Modeling - access datacenter info in 
attribute

Greetings

We are running Spectrum 9.3 and managing multiple Vcenters using the Sysedge 
VMware AIM.

My Vcenter team has done considerable work in defining data centers and 
environments within the Vcenter. The environments can be as simple as 
production, qa, or dev.

I have a need to create Global collections in Spectrum that contain just prod 
Vm's for a given datacenter.  I cannot find an attribute that has the names of 
the datacenter or environement. There are other examples of topography strings 
- LocationModelNameString, TopologyModelNameString and 
collectionsModelNameSrtring are good examples of this.

Does anyone have an idea on how to accomplish this??


[http://www.avoncompany.com/images/email/email_avon_logo.jpg]

Dan Ellsweig
IT Engineer - Enterprise Management Systems
1 Avon Plaza, Rye, New York 10580
Phone 914 935 2723
Tieline 3493 2723
Mobile 845-283-1132
dan.ellsw...@avon.commailto:dan.ellsw...@avon.com

Please consider the environment before printing



  *

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
raphael.fra...@computacenter.commailto:raphael.fra...@computacenter.com

---
Computacenter AG  Co. oHG, mit Sitz in Kerpen (Amtsgericht Köln HRA 18096)
Vertretungsberechtigte Gesellschafter:
Computacenter Aktiengesellschaft, mit Sitz in Köln (Amtsgericht Köln HRB 28384)
Vorstand: Tony Conophy
Aufsichtsrat: Michael Norris (Vorsitzender)
Computacenter Management GmbH, mit Sitz in Köln (Amtsgericht Köln HRB 28284)
Geschäftsführer: Dr. Karsten Freihube, Dr. Christine Haupt, Reiner Louis, 
Thomas Jescheck, Nils Scheller
Visit us on the Internet: http://www.computacenter.de
Visit our Online-Shop: https://shop.computacenter.de

This email is confidential. If you are not the intended recipient, you must not 
disclose or use the information contained in it. If you have received this mail 
in error, please tell us immediately by return email and delete the document.
---



  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
dan.ellsw...@avon.commailto:dan.ellsw...@avon.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.jpg

RE: [spectrum] Spectrum log management

[Chandler, Bradford]

There's an entry that you can add to the the ~SPECROOT/SS/.vnmrc file that you 
can set to true:

log_user_events=true

which will give you user events against devices.  E.g. user a changed the 
community string, updated an attribute, etc.

This can add quite a few events to your database so keep that in mind, but you 
could then run event reports for the specific events that you are looking for 
if you have Spectrum Report Manager.

The other place that logins/logouts can be tracked is on the OneClick server 
under ~specroot/OCLogs/client.log.  These are specific to the OneClick logins 
and logouts.

Brad

From: Fereydoon Mallahi Karai [mailto:fmall...@gmail.com]
Sent: Thursday, January 09, 2014 12:23 PM
To: spectrum
Subject: [spectrum] Spectrum log management

Hi,

I want to know what specific activities are logged in Spectrum and where those 
log files are stored and if there is any solution for having a daily backup of 
those log files for having a long time history.

Thank you,

Regards,

Ferey
* --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
brad.chand...@libertymutual.commailto:brad.chand...@libertymutual.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re:[spectrum] Spectrum DB save file will not decompress

[Dwight Antonio Spence]

There was a corrupted .idb file that caused the issue with the reload.  Thank 
you for all for your assistance.


On Dec 16, 2013, at 12:39 PM, Dwight Antonio Spence 
dwight.spe...@xassurance.com wrote:

 Good Afternoon,
 
 Anyone experience a Spectrum db save file that will not decompress for a db 
 restore, before?
 
 solutions??
 
 
 D. Spence


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE:[spectrum] Spectrum replacing WA_Links with Provider_Cloud models

[David Game]

Have a look at the Enterprise VPN Manager on each landscape and check:

1) Discover On Activation = No
2) Create on Trap = No
3) Enable Background Discovery = No

However if you're running BGP across the links, Provider Cloud is the method 
Spectrum uses to model a BGP link.  For our purposes it works quite well 
provided you get the ASN mapping set up correctly so you don't end up with 20+ 
Cloud models for the same provider just because they're using more than one ASN.

Also look into using proxy models to model your links instead of one armed 
bandit connections.  Model both end routers on each Spectroserver, but set the 
A end of one of them to be a Proxy Model on the first Spectroserver and the B 
end as a proxy model on the other Spectroserver. That way you'll get full 
connectivity modelled across your multiple landscapes when you use WA_Links or 
direct links.

David K. Game
Consultant - Managed Services
Logicalis UK Ltd

110 Buckingham Avenue
Slough, Berkshire, SL1 4PF
www.uk.logicalis.com
_
Business and technology working as one


-Original Message-
From: Funk, Bruce D CIV (US) [mailto:bruce.d.funk@mail.mil] 
Sent: 19 July 2013 17:17
To: spectrum
Subject: [spectrum] Spectrum replacing WA_Links with Provider_Cloud models

We are running 9.2.3.10.
We have two Spectro servers, each polling half the network.   As the network is 
richly connected, we have many  circuits that cross spectroserver polling 
boundaries, so our technique is to model each half of such a circuit on each 
spectroserver (so that you have a bunch of one-armed bandit wa_links, and 
then model them together on a global collection.  All of these links are 
tunnels.

Recently, Spectrum has started automatically replacing the wa_link models with 
provider_cloud models (we are doing bgp across these links as they connect the 
various regions of our network).

Today, I went in and destroyed all the provider_cloud models, did discover 
connections on all the  relevant devices, and the WA_Links were created just 
fine.  Then this evening, poof! All the single ended wa_links are converted 
into provider_clouds.  Does not appear to happen on Wa_links on physical ports, 
just tunnels.  The event log says it was created by a unser initiated 
discovery.

We really need to see the wa_link for each tunnel.
How can I get Spectrum to stop this behavioiur?

Thanks in advance.
-B_


Bruce D. Funk
Technical Director
European Theater NOSC, G3, 5th Signal Command (Theater)
DSN: (314) 380-4035   Commercial +49 621 730 4035
Cell:  +49 162 296 0186
VoSIP:  (304) 380-4035  (not always online)



---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum david.g...@uk.logicalis.com

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.
__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com 
__

This email communication does not create or vary any contractual relationship 
between Logicalis and you. Internet communications are not secure and 
accordingly Logicalis does not accept any legal liability for the contents of 
this message. The contents of this email are confidential to the intended 
recipient at the email address to which it has been addressed. It may not be 
disclosed to or used by anyone other than this addressee, nor may it be copied 
in any way. If received in error, please contact Logicalis on the above 
switchboard number quoting the name of the sender and the addressee and then 
delete it from your system. Please note that neither Logicalis nor the sender 
accepts any responsibility for viruses and it is your responsibility to scan 
the email and attachments (if any).

Please be aware that Logicalis UK Ltd may monitor email traffic data and also 
email content for security purposes.

Logicalis UK Ltd,  Registered in England and Wales No: 3732397,  Registered 
Office: 110 Buckingham Avenue, Slough. Berkshire, SL1 4PF 

__
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
__

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum Sysedge and SPM Test on HTTP--HTTPS Redirects

[Hilmar Preuße]

Hi,

Yes, SPM supports redirection in general. I'm pretty sure a redirection from
HTTP to HTTPS works too.

H.

On 18.03.2013 07:32, nikhil mehra wrote:
 Hello,

 Has anyone ever created a SPM test using sysedge and SPM (v 5.7 or later) 
 where 
 in the test is to check on HTTP URL availability but the URL itself redirects 
 to 
 HTTPS ?

 Does SPM supports redirection logic?

 Any help/suggestion would be appreciated.


 Thanks,
 -- 
 Nikhil Mehra


   * --To unsubscribe from spectrum, send email to lists...@unc.edu
 mailto:lists...@unc.edu with the body: unsubscribe spectrum 
 preu...@amasol.de 

-- 

Hilmar Preuße
amasol AG
Senior Consultant
Campus Neue Balan
Tel   +49 89 1894743-18
Claudius-Keller-Straße 3b
Fax   +49 89 1894743-99
D-81669 München
eMail preu...@amasol.de
http://www.amasol.de/


amasol Aktiengesellschaft für Informations- und Kommunikationstechnologie
Aufsichtsrat: Prof. Dr. Stephan Kaiser (Vorsitzender)
Vorstand: Wolfgang Bachmann, Stefan Deml, Thomas Dirsch, Frank Jahn
  Johann Maurer
Amtsgericht München HRB 128327, Sitz der Gesellschaft München

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum Monitoring Date and Time?

[Jonas Henrique]

Hi,
I would like to monitor the time a servidorX this CASystemEDGE.
If the time is different from my Spectrum Server generate an alarm

2013/2/20 Jason Hebron jason.heb...@gmail.com

 Not sure exactly what you mean, can you expand your request further?

 On 21 February 2013 09:28, Jonas Henrique jonas...@gmail.com wrote:

 Hi,
 I can monitor the date and time or just time using Spectrum?
 how to make

 Tks

 Jonas Gomes

- --To unsubscribe from spectrum, send email to lists...@unc.edu with
the body: unsubscribe spectrum jason.heb...@gmail.com




---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE:[spectrum] Spectrum Sizing

[Chandler, Bradford]

We moved from Solaris to Linux (Redhat, HP DL380 G7 64bit, 48G RAM).

Our 'biggest' server has 7807 devices on it which equates to 152581 models.

We did a Spectrum sizing beforehand to confirm the size and whether it would 
handle the load.

CPU and memory hover around 15-20% and 7-10% respectively.

Brad

From: Michael Votaw - ASI [mailto:mich...@arcadiasecureit.com]
Sent: Tuesday, February 19, 2013 9:50 AM
To: spectrum
Subject: [spectrum] Spectrum Sizing

I would be interested in hearing some of the larger sites out there and how 
many devices and models you have on any one SpectroServer.  We are starting to 
experience stability issues and was wondering if we are perhaps sized 
improperly.

We are running CentOS with 4G Ram on a pretty nice ESXi server.  The ESXi 
server is at about half capacity.  We have around 200,000 models total with 
about 2000 devices.  We will be moving to Red Hat soon.

Can anybody comment on this?


Michael S. Votaw
5th Signal Command - ETNOSC
Senior Spectrum Analyst
michael.s.votaw@mail.milmailto:michael.s.votaw@mail.mil
* --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
brad.chand...@libertymutual.commailto:brad.chand...@libertymutual.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum. How do I check if my secondary spectroserver is being updated?

[Cantwell, Rene D]

Hi Jon,

There will be events logged against the VNM model type for all of the database 
synch activity.

More information about the entire process can be found in the Database 
Management Guide, chapter 2.

--
Rene'


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com


-Original Message-
From: Jon Magnus Dullerud [mailto:dulle...@gmail.com] 
Sent: Tuesday, December 11, 2012 5:32 AM
To: spectrum
Subject: [spectrum] Spectrum. How do I check if my secondary spectroserver is 
being updated?

Hi
I recently had to stop my Primary Spectroserver, when i started it again I got 
an alarm: CONTACT LOST TO SECONDARY SPECTROSERVER.
One of the reasons for this may be that the secondary spectroserver is being 
updated, wich is allright.
Now I want to check if this really is happening, how do I do that?

Best Regards
JOn Magnus
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum cantw...@aprisma.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE:[spectrum] Spectrum Alam about eHealth Manager

[Bohra, Saurabh]

Magno,

Which version of Spectrum are you running? There was a bug in Heartbeat.xml in 
9.2 SP1 release which was fixed in 9.2.2, that has been one of the cause of the 
problem. I was integrating another application and used heartbeat event rule 
and found out about this. Support provided me with the  new xml file which 
resolved the issue.

There was also another issue with the way ehealth integration happened and 
another patch was supplied to me - Spectrum_09.02.01.D306, check out the readme.

Saurabh Bohra
O: 860-766-0842  |  M: 860-385-3597  |  e-mail: saurabh.bo...@espn.com

From: Magno de Souza Lima [mailto:magno.l...@cassi.com.br]
Sent: Wednesday, November 21, 2012 2:32 PM
To: spectrum
Subject: [spectrum] Spectrum Alam about eHealth Manager

Hello,

In the console Spectrum I have received for the eHealth Manager alarms, the 
alarm follows:

Originating Event
--
Heartbeat from eHealth integration server has ceased, an alarm will be 
generated.

Probable Cause
--
EHEALTH INTEGRATION SERVER CONTACT LOST

SYMPTOMS:

eHealth discoveries are no longer being requested.
Web service based eHealth Live Alarms are not being generated in SPECTRUM.
eHealth element mappings are not being executed.

PROBABLE CAUSES:

1) The OneClick Integration server process has been disabled or has shut down.

RECOMMENDED ACTIONS:

1) Ensure that OneClick Integration server process is running.

2) Ensure that the OneClick server is configured in the Active role on the 
eHealth configuration Administration page.


I have reviewed the entire configuration, the connectors and communication, but 
found nothing wrong, someone can help me?

Regards,

Magno Lima
GTI – Suporte Técnico
• Tel :(61) 3212-5029
• magno.l...@cassi.com.brmailto:magno.l...@cassi.com.br



O conteúdo desta mensagem é de domínio da CASSI e seu sigilo protegido por lei.
Caso tenha sido enviada por equívoco, favor apagá-la e notificar o remetente.



 *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
saurabh.bo...@espn.commailto:saurabh.bo...@espn.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com



Spectrum Software Release Notice

for

 CA Spectrum® Infrastructure Manager (CA Spectrum)

  05/14/2012

 Revision 1.0

 09.02.01.D306



#  #
#   IMPORTANT: #
#   This software release is provided as an interim#
#   solution to the problems associated with the   #
#   anomalies listed below.  This software may not #
#   be compatible with subsequent software releases.   #
#  #




REQUIREMENTS

SPECTRUM 09.02.00 and 09.02.01 are prerequisites for installation of
this patch.

OVERVIEW 

This is a debug patch for the following issue: Stale Ehealth Server 
Alarms
(87477,20882687-01)

BILL OF MATERIALS

ReleaseNote.D306.txt
clientjehealth.jar
jehealth.jar

runme.exe (Windows)
uninstall_D306.exe (Windows)

runme (Solaris/Linux)
uninstall_D306.pl (Solaris/Linux)

INSTALLATION INSTRUCTIONS

   NOTE: Please set all file permissions and ownership to the permissions
 and ownership of the existing libraries and files that you are
 replacing.

   NOTE: As `root` or an Administrator user:

   1. Delete all stale Alarms.

   2. Shutdown the OneClick clients and tomcat.

   3. Copy the SPECTRUM release files into a clean directory and start the
  installation as follows:

  -For Solaris:

- Save Spectrum_09.02.01.D306.Solaris.txe in a directory
  of your choice.

- Type: chmod 755 Spectrum_09.02.01.D306.Solaris.txe to
  change the permissions of the file.

- ./Spectrum_09.02.01.D306.Solaris.txe

  -For Windows:

- Save Spectrum_09.02.01.D306.Windows.exe in a directory
  of your choice.

- In a bash shell run: ./Spectrum_09.02.01.D306.Windows.exe

- Click on OK in the pop-up, once the installation is complete.

  -For Linux:

- Save Spectrum_09.02.01.D306.Linux.txe in a directory
  of your choice.

- Type: chmod 755 

RE: [spectrum] Spectrum default watches - where to see formulas

[Stephen Warne]

Hi Ivana
Go to the Oneclick WEB page  administration  watch reports
Hope this helps.
Regards
Stephen.

From: Ivana Kvaka [mailto:ivana.kv...@sedamit.hr]
Sent: 20 November 2012 15:15
To: spectrum
Subject: [spectrum] Spectrum default watches - where to see formulas

Hi all from list,

Do you know where to see how default Spectrum watches, for instance Load_IN 
look like? In the old 8.1 this could be seen in SpectroGraph, in SpectroWatch.
But in 9.2., it seems to me they are somewhere hidden. And there is no even 
documentation about this watches and their formulas.

Thanks!

Ivana


Srdacan pozdrav / Kind regards,
_
Ivana Kvaka
Sedam IT d.o.o.
HR - 10 000 Zagreb
Koledovcina 2
Tel:+385   1 2353 736
Fax:   +385   1 2353 707
Mob: +385 91 2353 736
www.sedamIT.hr
_

Napomena: Ova poruka sadrzi podatke povjerljive prirode, iskljucivo namijenjene 
osobama oznacenima kao primateljima te se pristup od strane bilo koje druge 
osobe smatra neovlastenim. Ukoliko niste oznaceni primatelj, svaka 
distribucija, kopiranje, umnozavanje ili otkrivanje sadrzaja trecim osobama je 
strogo zabranjeno i smatra se protuzakonitim. Ukoliko ste dobili ovu poruku, a 
niste oznaceni primatelj, molimo Vas da sto prije obavijestite posiljatelja 
poruke i unistite sve postojece kopije. Ova napomena takodjer potvrdjuje da je 
ova elektronicka poruka testirana na postojanje racunalnih virusa.

Disclaimer: The information in this email is confidential and it is intended 
solely for the addressee. Access to this email by anyone else is unauthorized. 
If you are not the intended recipient, any distribution, copying, duplication 
or disclosure is prohibited and may be unlawful. If you have received this 
email in error, please notify the sender immediately and destroy it, and all 
copies of it. This footnote also confirms that this email message has been 
swept for the presence of computer viruses.


  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
stephenwa...@networksfirst.commailto:stephenwa...@networksfirst.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum in Solaris zones

[Craig Cook]

Sparse zones are fine.

Craig

-Original Message-
From: Jeff Wieland [mailto:wiel...@purdue.edu] 
Sent: Wednesday, September 12, 2012 11:54 AM
To: spectrum
Subject: [spectrum] Spectrum in Solaris zones

Sometime back, there was some discussion of installing Spectrum in Solaris 10 
zones - for anyone who has done this, do they need to be whole root zones, or 
will sparse zones work OK?

-- 
  Jeff Wieland| Purdue University
   Network Systems Administrator  |ITSO UNIX Platforms
   Voice: (765)496-8234   |401 S. Grant Street
FAX: (765)496-1380|  West Lafayette, IN 47907


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum craig.c...@carquest.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Antwort: RE: [spectrum] Spectrum in Solaris zones

[Christian Fieres]

Jeff,

you should however consider switching to a 3rd party TFTP server for NCM 
as Sun's (Oracle's) out of the box server can only run in the Global Zone, 
AFAIR. Apart from that I can tell you that I am running an SS and two 
OneClick Servers in Sparse Root Zones on a rather old Solaris 10 
patchlevel (mid-2008) and haven't had any problems so far.

Freundliche Grüße / Best regards

Christian Fieres

Mainova AG
Planung und Betrieb Infrastruktur (M3-ON2)
Service Operation Center
Solmsstraße 38
60623 Frankfurt

Telefon / Phone (069) 2 13-2 36 17
Mobil / Mobile (0170) 5 60 15 63
Telefax / Facsimile (069) 2 13-9 62 36 17
E-Mail c.fie...@mainova.de




Von:Craig Cook craig.c...@carquest.com
An: spectrum spectrum@listserv.unc.edu, 
Datum:  12.09.2012 18:35
Betreff:RE: [spectrum] Spectrum in Solaris zones



Sparse zones are fine.

Craig

-Original Message-
From: Jeff Wieland [mailto:wiel...@purdue.edu] 
Sent: Wednesday, September 12, 2012 11:54 AM
To: spectrum
Subject: [spectrum] Spectrum in Solaris zones

Sometime back, there was some discussion of installing Spectrum in Solaris 
10 zones - for anyone who has done this, do they need to be whole root 
zones, or will sparse zones work OK?

-- 
  Jeff Wieland| Purdue University
   Network Systems Administrator  |ITSO UNIX Platforms
   Voice: (765)496-8234   |401 S. Grant Street
FAX: (765)496-1380|  West Lafayette, IN 47907


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum craig.c...@carquest.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum c.fie...@mainova.de




Mainova Aktiengesellschaft Solmsstraße 38 D-60623 Frankfurt am Main
Vorsitzende des Aufsichtsrates: Dr. h. c. Petra Roth, Oberbürgermeisterin 
a. D.
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Dr. Peter Birkner, 
Lothar Herbst, Dr. Marie-Luise Wolff
Sitz der Aktiengesellschaft: Frankfurt am Main Amtsgericht Frankfurt HRB 
7173 USt-ID-Nr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum Utilizing Splunk

[david t. klein]

 

Create a policy and a SetScript/ClearScript that assemble the message from
the attributes/VarBinds and write it to a FIFO in the filesystem of the VNM
server. Then install the Splunk Light Forwarder Agent, and have it read the
FIFO as though it were plain text-file. 

 

 

-DTK

 

--
david t. klein

Cisco Certified Network Associate (CSCO11281885)
Linux Professional Institute Certification (LPI000165615)
Redhat Certified Engineer (805009745938860)

Quis custodiet ipsos custodes?




 

From: Jeremy Montoya [mailto:jeremy.mont...@mesaaz.gov] 
Sent: Thursday, August 16, 2012 12:36 PM
To: spectrum
Subject: [spectrum] Spectrum Utilizing Splunk

 

Just curious if anyone has tried using Splunk to backend Spectrum for
reporting?

*   --To unsubscribe from spectrum, send email to lists...@unc.edu with
the body: unsubscribe spectrum r...@nachtmaus.us 

  _  

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2197 / Virus Database: 2437/5203 - Release Date: 08/15/12


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum Utilizing Splunk

[Rick Jury]

I have a test app I've been working on that does this.

Happy to share the app with anyone who wants to try it out just email me direct.



[cid:image001.jpg@01CD7C5F.25524B60]








Rick Jury
Senior Support Specialist Tools
Technology  Shared Services
Phone: +64 4 8029643
Mobile: +64 27 278 5992


Level 12 Telecom Central - Boulcott
42-52 Willis Street, Wellington
www.telecom.co.nzhttp://www.telecom.co.nz




This communication, including any attachments, is confidential. If you are not 
the intended recipient, you should not read it - please contact me immediately, 
destroy it, and do not copy or use any part of this communication or disclose 
anything about it. Thank you. Please note that this communication does not 
designate an information system for the purposes of the Electronic Transactions 
Act 2002.





From: david t. klein [mailto:r...@nachtmaus.us]
Sent: Friday, 17 August 2012 8:06 a.m.
To: spectrum
Subject: RE: [spectrum] Spectrum Utilizing Splunk


Create a policy and a SetScript/ClearScript that assemble the message from the 
attributes/VarBinds and write it to a FIFO in the filesystem of the VNM server. 
Then install the Splunk Light Forwarder Agent, and have it read the FIFO as 
though it were plain text-file.


-DTK

--
david t. klein

Cisco Certified Network Associate (CSCO11281885)
Linux Professional Institute Certification (LPI000165615)
Redhat Certified Engineer (805009745938860)

Quis custodiet ipsos custodes?


From: Jeremy Montoya [mailto:jeremy.mont...@mesaaz.gov]
Sent: Thursday, August 16, 2012 12:36 PM
To: spectrum
Subject: [spectrum] Spectrum Utilizing Splunk

Just curious if anyone has tried using Splunk to backend Spectrum for reporting?

 *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
r...@nachtmaus.usmailto:r...@nachtmaus.us


No virus found in this message.
Checked by AVG - www.avg.comhttp://www.avg.com
Version: 2012.0.2197 / Virus Database: 2437/5203 - Release Date: 08/15/12

 *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
rick.j...@telecom.co.nz

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.jpg

RE: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

[Cantwell, Rene D]

Hello Fritz,

It looks like a bug in our install checker functionality. At the very least the 
pop up error message should tell you which applications it wants you to 
shutdown.

The applications it should be checking for on Linux/Solaris are: 
processd,SCP,LocServer, ArchMgr, nameserv, telnetd spectrum, ncmservice, mysqld 
spectrum, SpectroSERVER, VnmShd, java OneClick.

If all of these instances (not just the Spectrum version of them) are shutdown 
and install will still not work, please open a support issue so we can get 
engineering involved to help resolve.

--
Rene'


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
mailto:rene.cantw...@ca.com[Description: Description: Description: 
Description: Picture]javascript:ClickThumbnail(76)

From: fritz.buetiko...@id.unibe.ch [mailto:fritz.buetiko...@id.unibe.ch]
Sent: Monday, August 06, 2012 7:24 AM
To: spectrum
Cc: spectrum@listserv.unc.edu
Subject: Re: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now 
available for customer download.

Hello Rene

I downloaded SP2 for Solaris 9 last week and tried to update our
test server to 9.2-SP2 ... and failed ;-((

I tried to install with the Spectrum environment UP (SS down, but LocServer and
other apps running) and also without the Spectrum environment. In both scenarios
the error message was the same:



... there is no process mentioned in the pop-ip mesage that should be up; so I 
assume
the new process-checker on Solaris has something broken !

The other bad thing is, that after the install of SP2 has failed, I am not able 
anymore
to startup the SCP gui to restart the old 9.2-H07 version. The error message in 
the
SCP.OUT file is:

streicher cat SCP.OUT
Thu Aug 02 08:42:22 MEST 2012: SPECTRUM Control Panel started.
Thu Aug 02 08:42:41 MEST 2012: SPECTRUM installation detected, exiting.

.. which means, that I am blocked out twice !!!

###

Is there any way to start the installer on Solaris without the new 
process-check ?

Thank you and best regards,

--Fritz.
___
University of Bern
Computer Services Department

Fritz Buetikofer
Senior IT Manager

Gesellschaftsstrasse 6
CH-3012 Bern
Switzerland
Tel.+41 (0)31 631 3843
Fax.   +41 (0)31 631 3865
Web. http://www.id.unibe.ch



On 02.08.2012, at 15:23, Cantwell, Rene D 
rene.cantw...@ca.commailto:rene.cantw...@ca.com wrote:



Hello Everyone,

Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

A news item announcement with highlights of what is included in 9.2.2 can be 
found on our product home page at 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832 .

Customers can download from two sources;
From support.ca.com - 
https://support.ca.com/irj/portal/anonymous/phpdocs?filePath=0/7832/7832_92_patchindex.html
From ftp.ca.comftp://ftp.ca.com - 
/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00

Since cutting the DVD iso image the Release Notice (SRN) has been updated with 
two additional special consideration items #21 and #22.  The Solaris PTF patch 
for #22 is available from the same ftp.ca.comareaftp://ftp.ca.comarea as 
9.2.2 itself (/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00).

In addition to these two special considerations, the support team is working on 
the following issues with our sustaining engineering team;

1.Original DVD iso image was corrupt.
a.What is available today is good.
2.Solaris crash, found in late QA tests.
a.PTF_9.2.201 is available from ftp.ca.comftp://ftp.ca.com site mentioned 
above.
3.RedHat 5.8 crash after installing 9.2.2.
a.Temp workaround: replacing the default MTS version of the SpectroSERVER 
executable with the non-MTS version (shipped) resolves the problem. Please 
contact the support team if help is needed.
4.OneClick/Tomcat upgrade, tomcat will not start after upgrade.
a.Support actively working with SE on workaround, root cause and solution. 
Please contact the support team if you are experiencing this issue.
5.Install stopping running non-Spectrum mysql process.
a.Support actively working with SE on solution for next hotfix, temp 
workaround is to shutdown what install is requesting in order to start the 
9.2.2 install.


Here are the checksums for each of the ftp executables:

76ce64c40814139c2cf6a66c6dc0757e *Spectrum_09.02.02.00.201.Linux.txe
cb3e964081c38c88db7058fccac74d6c *Spectrum_09.02.02.00.201.Solaris.txe
4b395435d9577a9d0b77d3968693751a*Spectrum_09.02.02.00.201.Windows.exe
119f55b552ff36568b856dc2f8ed324d   *Spectrum_09.02.02.00.201.dist.tgz
9ec9bd012742c6ba1794265083750ef2 
*Spectrum_09.02.02.PTF_9.2.201.Solaris.txe



If you should have any specific concerns or questions regarding 9.2.2, please 
send them directly to me.

Regards,
Rene'



René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603

RE: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

[Nason, Roger W]

Fritz,

To get the Spectrum Control Panel to Launch you will need to remove the 
$SPECROOT/Install-Tools/IDX/CD directory and relaunch and SCP will launch.

Regards,

- Roger

From: Cantwell, Rene D
Sent: Monday, August 06, 2012 10:00 AM
To: fritz.buetiko...@id.unibe.ch; spectrum
Cc: Nason, Roger W
Subject: RE: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now 
available for customer download.

Hello Fritz,

It looks like a bug in our install checker functionality. At the very least the 
pop up error message should tell you which applications it wants you to 
shutdown.

The applications it should be checking for on Linux/Solaris are: 
processd,SCP,LocServer, ArchMgr, nameserv, telnetd spectrum, ncmservice, mysqld 
spectrum, SpectroSERVER, VnmShd, java OneClick.

If all of these instances (not just the Spectrum version of them) are shutdown 
and install will still not work, please open a support issue so we can get 
engineering involved to help resolve.

--
Rene'


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
mailto:rene.cantw...@ca.com[Description: Description: Description: 
Description: Picture]javascript:ClickThumbnail(76)

From: fritz.buetiko...@id.unibe.ch [mailto:fritz.buetiko...@id.unibe.ch]
Sent: Monday, August 06, 2012 7:24 AM
To: spectrum
Cc: spectrum@listserv.unc.edu
Subject: Re: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now 
available for customer download.

Hello Rene

I downloaded SP2 for Solaris 9 last week and tried to update our
test server to 9.2-SP2 ... and failed ;-((

I tried to install with the Spectrum environment UP (SS down, but LocServer and
other apps running) and also without the Spectrum environment. In both scenarios
the error message was the same:



... there is no process mentioned in the pop-ip mesage that should be up; so I 
assume
the new process-checker on Solaris has something broken !

The other bad thing is, that after the install of SP2 has failed, I am not able 
anymore
to startup the SCP gui to restart the old 9.2-H07 version. The error message in 
the
SCP.OUT file is:

streicher cat SCP.OUT
Thu Aug 02 08:42:22 MEST 2012: SPECTRUM Control Panel started.
Thu Aug 02 08:42:41 MEST 2012: SPECTRUM installation detected, exiting.

.. which means, that I am blocked out twice !!!

###

Is there any way to start the installer on Solaris without the new 
process-check ?

Thank you and best regards,

--Fritz.
___
University of Bern
Computer Services Department

Fritz Buetikofer
Senior IT Manager

Gesellschaftsstrasse 6
CH-3012 Bern
Switzerland
Tel.+41 (0)31 631 3843
Fax.   +41 (0)31 631 3865
Web. http://www.id.unibe.ch


On 02.08.2012, at 15:23, Cantwell, Rene D 
rene.cantw...@ca.commailto:rene.cantw...@ca.com wrote:


Hello Everyone,

Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

A news item announcement with highlights of what is included in 9.2.2 can be 
found on our product home page at 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832 .

Customers can download from two sources;
From support.ca.com - 
https://support.ca.com/irj/portal/anonymous/phpdocs?filePath=0/7832/7832_92_patchindex.html
From ftp.ca.comftp://ftp.ca.com - 
/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00

Since cutting the DVD iso image the Release Notice (SRN) has been updated with 
two additional special consideration items #21 and #22.  The Solaris PTF patch 
for #22 is available from the same ftp.ca.comareaftp://ftp.ca.comarea as 
9.2.2 itself (/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00).

In addition to these two special considerations, the support team is working on 
the following issues with our sustaining engineering team;

1.Original DVD iso image was corrupt.
a.What is available today is good.
2.Solaris crash, found in late QA tests.
a.PTF_9.2.201 is available from ftp.ca.comftp://ftp.ca.com site mentioned 
above.
3.RedHat 5.8 crash after installing 9.2.2.
a.Temp workaround: replacing the default MTS version of the SpectroSERVER 
executable with the non-MTS version (shipped) resolves the problem. Please 
contact the support team if help is needed.
4.OneClick/Tomcat upgrade, tomcat will not start after upgrade.
a.Support actively working with SE on workaround, root cause and solution. 
Please contact the support team if you are experiencing this issue.
5.Install stopping running non-Spectrum mysql process.
a.Support actively working with SE on solution for next hotfix, temp 
workaround is to shutdown what install is requesting in order to start the 
9.2.2 install.


Here are the checksums for each of the ftp executables:

76ce64c40814139c2cf6a66c6dc0757e *Spectrum_09.02.02.00.201.Linux.txe
cb3e964081c38c88db7058fccac74d6c *Spectrum_09.02.02.00.201.Solaris.txe
4b395435d9577a9d0b77d3968693751a*Spectrum_09.02.02.00.201

RE: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

[Lip Jen Chew]

I'm unable to continue with this error as well, on Solaris. Did you find a 
solution?

I haven't try to start my Spectrum yet...

Lip Jen


From: Cantwell, Rene D [rene.cantw...@ca.com]
Sent: Monday, August 06, 2012 10:00 AM
To: spectrum
Cc: Nason, Roger W
Subject: RE: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now 
available for customer download.

Hello Fritz,

It looks like a bug in our install checker functionality. At the very least the 
pop up error message should tell you which applications it wants you to 
shutdown.

The applications it should be checking for on Linux/Solaris are: 
processd,SCP,LocServer, ArchMgr, nameserv, telnetd spectrum, ncmservice, mysqld 
spectrum, SpectroSERVER, VnmShd, java OneClick.

If all of these instances (not just the Spectrum version of them) are shutdown 
and install will still not work, please open a support issue so we can get 
engineering involved to help resolve.

--
Rene’


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
mailto:rene.cantw...@ca.com[cid:image001.jpg@01CD73B9.7D08B8C0]https://exch.mail.umd.edu/owa/UrlBlockedError.aspx

From: fritz.buetiko...@id.unibe.ch [mailto:fritz.buetiko...@id.unibe.ch]
Sent: Monday, August 06, 2012 7:24 AM
To: spectrum
Cc: spectrum@listserv.unc.edu
Subject: Re: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now 
available for customer download.

Hello Rene

I downloaded SP2 for Solaris 9 last week and tried to update our
test server to 9.2-SP2 … and failed ;-((

I tried to install with the Spectrum environment UP (SS down, but LocServer and
other apps running) and also without the Spectrum environment. In both scenarios
the error message was the same:



… there is no process mentioned in the pop-ip mesage that should be up; so I 
assume
the new process-checker on Solaris has something broken !

The other bad thing is, that after the install of SP2 has failed, I am not able 
anymore
to startup the SCP gui to restart the old 9.2-H07 version. The error message in 
the
SCP.OUT file is:

streicher cat SCP.OUT
Thu Aug 02 08:42:22 MEST 2012: SPECTRUM Control Panel started.
Thu Aug 02 08:42:41 MEST 2012: SPECTRUM installation detected, exiting.

.. which means, that I am blocked out twice !!!

###

Is there any way to start the installer on Solaris without the new 
process-check ?

Thank you and best regards,

--Fritz.
___
University of Bern
Computer Services Department

Fritz Buetikofer
Senior IT Manager

Gesellschaftsstrasse 6
CH-3012 Bern
Switzerland
Tel.+41 (0)31 631 3843
Fax.   +41 (0)31 631 3865
Web. http://www.id.unibe.ch



On 02.08.2012, at 15:23, Cantwell, Rene D 
rene.cantw...@ca.commailto:rene.cantw...@ca.com wrote:



Hello Everyone,

Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

A news item announcement with highlights of what is included in 9.2.2 can be 
found on our product home page at 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832 .

Customers can download from two sources;
From support.ca.com - 
https://support.ca.com/irj/portal/anonymous/phpdocs?filePath=0/7832/7832_92_patchindex.html
From ftp.ca.comftp://ftp.ca.com/ - 
/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00

Since cutting the DVD iso image the Release Notice (SRN) has been updated with 
two additional special consideration items #21 and #22.  The Solaris PTF patch 
for #22 is available from the same ftp.ca.comareaftp://ftp.ca.comarea/ as 
9.2.2 itself (/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00).

In addition to these two special considerations, the support team is working on 
the following issues with our sustaining engineering team;

1.Original DVD iso image was corrupt.
a.What is available today is good.
2.Solaris crash, found in late QA tests.
a.PTF_9.2.201 is available from ftp.ca.comftp://ftp.ca.com/ site 
mentioned above.
3.RedHat 5.8 crash after installing 9.2.2.
a.Temp workaround: replacing the default MTS version of the SpectroSERVER 
executable with the non-MTS version (shipped) resolves the problem. Please 
contact the support team if help is needed.
4.OneClick/Tomcat upgrade, tomcat will not start after upgrade.
a.Support actively working with SE on workaround, root cause and solution. 
Please contact the support team if you are experiencing this issue.
5.Install stopping running non-Spectrum mysql process.
a.Support actively working with SE on solution for next hotfix, temp 
workaround is to shutdown what install is requesting in order to start the 
9.2.2 install.


Here are the checksums for each of the ftp executables:

76ce64c40814139c2cf6a66c6dc0757e *Spectrum_09.02.02.00.201.Linux.txe
cb3e964081c38c88db7058fccac74d6c *Spectrum_09.02.02.00.201.Solaris.txe
4b395435d9577a9d0b77d3968693751a*Spectrum_09.02.02.00.201.Windows.exe

Re: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

[Rob]

Nice to see an very familiar name still working with Spectrum

I have installed 9.2.2 twice now with no issues at all. (RHEL)  I 
abandoned the X based installer about 7 months ago for  SRAdmin which I 
love. All is done from the sdic subdir and two control files: hostargs 
and (what I call it) srapass.  Read up on it in the Install Guide and 
you'll see it's pretty simple, but does require the SRAadmin daemon to 
be set up prior. (trivial)

  Even in my highly silo'd environment, I am given the flexibility of 
the Linux admins to have root for the 20 mins it takes me to upgrade 
with SRAdmin. Have used it for H04, 5, 6, 7 and will now in Prod for H08.

The docs say to shut ALL processes down if I'm not mistaken, including 
processd and all the components in the partslists...

 From the Release Notes:


  PRE-INSTALLATION INSTRUCTIONS for Spectrum 9.2.2.8.201
  (SpectroSERVER, OneClick, and other related components)

1. If you have customized any files that were provided with prior
Spectrum installations, then you should refer to the Preserving
Database Customizations section of the Installation Guide (Document
Spectrum_Install_ENU.pdf) for instructions on preserving your
customizations.

2. Shut down OneClick, SpectroSERVER, Archive Manager, Control
Panel, processd, and any other Spectrum applications that are
running including bash shells.



-Rob Borowicz



On 8/6/2012 6:24 AM, fritz.buetiko...@id.unibe.ch wrote:
 Hello Rene

 I downloaded SP2 for Solaris 9 last week and tried to update our
 test server to 9.2-SP2 … and failed ;-((

 I tried to install with the Spectrum environment UP (SS down, but 
 LocServer and
 other apps running) and also without the Spectrum environment. In both 
 scenarios
 the error message was the same:


 … there is no process mentioned in the pop-ip mesage that should be 
 up; so I assume
 the new process-checker on Solaris has something broken !

 The other bad thing is, that after the install of SP2 has failed, I am 
 not able anymore
 to startup the SCP gui to restart the old 9.2-H07 version. The error 
 message in the
 SCP.OUT file is:

 streicher cat SCP.OUT
 Thu Aug 02 08:42:22 MEST 2012: SPECTRUM Control Panel started.
 Thu Aug 02 08:42:41 MEST 2012: SPECTRUM installation detected, exiting.

 .. which means, that I am blocked out twice !!!

 ###

 Is there any way to start the installer on Solaris without the new 
 process-check ?

 Thank you and best regards,

 --Fritz.
 ___
 University of Bern
 Computer Services Department

 Fritz Buetikofer
 Senior IT Manager

 Gesellschaftsstrasse 6
 CH-3012 Bern
 Switzerland
 Tel.+41 (0)31 631 3843
 Fax.   +41 (0)31 631 3865
 Web. http://www.id.unibe.ch



 On 02.08.2012, at 15:23, Cantwell, Rene D rene.cantw...@ca.com 
 mailto:rene.cantw...@ca.com wrote:


 Hello Everyone,

 Spectrum 9.2 Service Pack SP02 (aka H08) is now available for 
 customer download.

 A news item announcement with highlights of what is included in 9.2.2 
 can be found on our product home page at 
 https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832 .

 Customers can download from two sources;
 From support.ca.com - 
 https://support.ca.com/irj/portal/anonymous/phpdocs?filePath=0/7832/7832_92_patchindex.html
 From ftp.ca.com - /pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00

 Since cutting the DVD iso image the Release Notice (SRN) has been 
 updated with two additional special consideration items #21 and #22. 
  The Solaris PTF patch for #22 is available from the 
 same ftp.ca.comarea as 9.2.2 itself 
 (/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00).

 In addition to these two special considerations, the support team is 
 working on the following issues with our sustaining engineering team;

 1.Original DVD iso image was corrupt.
 a.What is available today is good.
 2.Solaris crash, found in late QA tests.
 a.PTF_9.2.201 is available from ftp.ca.com site mentioned above.
 3.RedHat 5.8 crash after installing 9.2.2.
 a.Temp workaround: replacing the default MTS version of the 
 SpectroSERVER executable with the non-MTS version (shipped) resolves 
 the problem. Please contact the support team if help is needed.
 4.OneClick/Tomcat upgrade, tomcat will not start after upgrade.
 a.Support actively working with SE on workaround, root cause and 
 solution. Please contact the support team if you are experiencing 
 this issue.
 5.Install stopping running non-Spectrum mysql process.
 a.Support actively working with SE on solution for next hotfix, 
 temp workaround is to shutdown what install is requesting in order to 
 start the 9.2.2 install.


 Here are the checksums for each of the ftp executables:

 76ce64c40814139c2cf6a66c6dc0757e *Spectrum_09.02.02.00.201.Linux.txe
 cb3e964081c38c88db7058fccac74d6c *Spectrum_09.02.02.00.201.Solaris.txe
 4b395435d9577a9d0b77d3968693751a  *Spectrum_09.02.02.00.201.Windows.exe
 

RE:[spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

[Bohra, Saurabh]

Rene,

I have concern about the following statement.  Do we have to stop this on 
SpectroSERVER machine or OneClick machine with SRM. If it is latter SRM will 
not get upgraded, if we shutdown mysql process in *NIX.


5.Install stopping running non-Spectrum mysql process.

a.Support actively working with SE on solution for next hotfix, temp 
workaround is to shutdown what install is requesting in order to start the 
9.2.2 install.


Saurabh Bohra
O: 860-766-0842  |  M: 860-385-3597  |  e-mail: saurabh.bo...@espn.com

From: Cantwell, Rene D [mailto:rene.cantw...@ca.com]
Sent: Thursday, August 02, 2012 9:23 AM
To: spectrum
Subject: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available 
for customer download.


Hello Everyone,

Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

A news item announcement with highlights of what is included in 9.2.2 can be 
found on our product home page at 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832%20 
.

Customers can download from two sources;
From support.ca.com - 
https://support.ca.com/irj/portal/anonymous/phpdocs?filePath=0/7832/7832_92_patchindex.html
From ftp.ca.comftp://ftp.ca.com - 
/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00

Since cutting the DVD iso image the Release Notice (SRN) has been updated with 
two additional special consideration items #21 and #22.  The Solaris PTF patch 
for #22 is available from the same ftp.ca.comftp://ftp.ca.com area as 9.2.2 
itself (/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00).

In addition to these two special considerations, the support team is working on 
the following issues with our sustaining engineering team;


1.Original DVD iso image was corrupt.

a.What is available today is good.

2.Solaris crash, found in late QA tests.

a.PTF_9.2.201 is available from ftp.ca.comftp://ftp.ca.com site mentioned 
above.

3.RedHat 5.8 crash after installing 9.2.2.

a.Temp workaround: replacing the default MTS version of the SpectroSERVER 
executable with the non-MTS version (shipped) resolves the problem. Please 
contact the support team if help is needed.

4.OneClick/Tomcat upgrade, tomcat will not start after upgrade.

a.Support actively working with SE on workaround, root cause and solution. 
Please contact the support team if you are experiencing this issue.

5.Install stopping running non-Spectrum mysql process.

a.Support actively working with SE on solution for next hotfix, temp 
workaround is to shutdown what install is requesting in order to start the 
9.2.2 install.



Here are the checksums for each of the ftp executables:

76ce64c40814139c2cf6a66c6dc0757e *Spectrum_09.02.02.00.201.Linux.txe
cb3e964081c38c88db7058fccac74d6c *Spectrum_09.02.02.00.201.Solaris.txe
4b395435d9577a9d0b77d3968693751a*Spectrum_09.02.02.00.201.Windows.exe
119f55b552ff36568b856dc2f8ed324d   *Spectrum_09.02.02.00.201.dist.tgz
9ec9bd012742c6ba1794265083750ef2 
*Spectrum_09.02.02.PTF_9.2.201.Solaris.txe



If you should have any specific concerns or questions regarding 9.2.2, please 
send them directly to me.

Regards,
Rene'


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
mailto:rene.cantw...@ca.com[cid:image001.jpg@01CD709B.E7E4DD70]javascript:ClickThumbnail(76)


 *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
saurabh.bo...@espn.commailto:saurabh.bo...@espn.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.jpg

RE:[spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

[Cantwell, Rene D]

Good question Saurabh.  I'm going to ask Roger Nason to answer you.  Roger is 
working with SE on this issue and is in the process of developing a knowledge 
doc for it.

--
Rene'

René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
mailto:rene.cantw...@ca.com[Description: Description: Description: 
Description: Picture]javascript:ClickThumbnail(76)

From: Bohra, Saurabh [mailto:saurabh.bo...@espn.com]
Sent: Thursday, August 02, 2012 10:58 AM
To: Cantwell, Rene D; spectrum
Subject: RE: Spectrum 9.2 Service Pack SP02 (aka H08) is now available for 
customer download.

Rene,

I have concern about the following statement.  Do we have to stop this on 
SpectroSERVER machine or OneClick machine with SRM. If it is latter SRM will 
not get upgraded, if we shutdown mysql process in *NIX.


5.Install stopping running non-Spectrum mysql process.

a.Support actively working with SE on solution for next hotfix, temp 
workaround is to shutdown what install is requesting in order to start the 
9.2.2 install.


Saurabh Bohra
O: 860-766-0842  |  M: 860-385-3597  |  e-mail: 
saurabh.bo...@espn.commailto:saurabh.bo...@espn.com

From: Cantwell, Rene D 
[mailto:rene.cantw...@ca.com]mailto:[mailto:rene.cantw...@ca.com]
Sent: Thursday, August 02, 2012 9:23 AM
To: spectrum
Subject: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available 
for customer download.


Hello Everyone,

Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

A news item announcement with highlights of what is included in 9.2.2 can be 
found on our product home page at 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832%20 
.

Customers can download from two sources;
From support.ca.com - 
https://support.ca.com/irj/portal/anonymous/phpdocs?filePath=0/7832/7832_92_patchindex.html
From ftp.ca.comftp://ftp.ca.com - 
/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00

Since cutting the DVD iso image the Release Notice (SRN) has been updated with 
two additional special consideration items #21 and #22.  The Solaris PTF patch 
for #22 is available from the same ftp.ca.comftp://ftp.ca.com area as 9.2.2 
itself (/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00).

In addition to these two special considerations, the support team is working on 
the following issues with our sustaining engineering team;


1.Original DVD iso image was corrupt.

a.What is available today is good.

2.Solaris crash, found in late QA tests.

a.PTF_9.2.201 is available from ftp.ca.comftp://ftp.ca.com site mentioned 
above.

3.RedHat 5.8 crash after installing 9.2.2.

a.Temp workaround: replacing the default MTS version of the SpectroSERVER 
executable with the non-MTS version (shipped) resolves the problem. Please 
contact the support team if help is needed.

4.OneClick/Tomcat upgrade, tomcat will not start after upgrade.

a.Support actively working with SE on workaround, root cause and solution. 
Please contact the support team if you are experiencing this issue.

5.Install stopping running non-Spectrum mysql process.

a.Support actively working with SE on solution for next hotfix, temp 
workaround is to shutdown what install is requesting in order to start the 
9.2.2 install.



Here are the checksums for each of the ftp executables:

76ce64c40814139c2cf6a66c6dc0757e *Spectrum_09.02.02.00.201.Linux.txe
cb3e964081c38c88db7058fccac74d6c *Spectrum_09.02.02.00.201.Solaris.txe
4b395435d9577a9d0b77d3968693751a*Spectrum_09.02.02.00.201.Windows.exe
119f55b552ff36568b856dc2f8ed324d   *Spectrum_09.02.02.00.201.dist.tgz
9ec9bd012742c6ba1794265083750ef2 
*Spectrum_09.02.02.PTF_9.2.201.Solaris.txe



If you should have any specific concerns or questions regarding 9.2.2, please 
send them directly to me.

Regards,
Rene'


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
mailto:rene.cantw...@ca.com[Description: Description: Description: 
Description: Picture]javascript:ClickThumbnail(76)


  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
saurabh.bo...@espn.commailto:saurabh.bo...@espn.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.jpg

RE:[spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

[Nason, Roger W]

Hi Saurabh,

The issue is that process checking during install was added in 9.2. The install 
will inform you if any processes are running that need to be shut down for the 
install to work properly. I ran into the issue on a Windows server, that had 
CABI installed as well as SRM. The install would not let me proceed until I 
shutdown the CABI instance of MySQL, since it has the same process name as the 
Spectrum version (mysqld-nt.exe). Once I stopped the CABI version of MySQL my 
install proceeded and finished successfully.

The only issue is that if another, non-Spectrum, instance of MySQL is running 
with the same process name, then the install will make you stop it before it 
will proceed.

I am in the processes of testing this on Linux and Solaris and will let you 
know the results.

- Roger

From: Cantwell, Rene D
Sent: Thursday, August 02, 2012 11:06 AM
To: Bohra, Saurabh; spectrum; Nason, Roger W
Subject: RE: Spectrum 9.2 Service Pack SP02 (aka H08) is now available for 
customer download.

Good question Saurabh.  I'm going to ask Roger Nason to answer you.  Roger is 
working with SE on this issue and is in the process of developing a knowledge 
doc for it.

--
Rene'

René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
mailto:rene.cantw...@ca.com[Description: Description: Description: 
Description: Picture]javascript:ClickThumbnail(76)

From: Bohra, Saurabh [mailto:saurabh.bo...@espn.com]
Sent: Thursday, August 02, 2012 10:58 AM
To: Cantwell, Rene D; spectrum
Subject: RE: Spectrum 9.2 Service Pack SP02 (aka H08) is now available for 
customer download.

Rene,

I have concern about the following statement.  Do we have to stop this on 
SpectroSERVER machine or OneClick machine with SRM. If it is latter SRM will 
not get upgraded, if we shutdown mysql process in *NIX.


5.Install stopping running non-Spectrum mysql process.

a.Support actively working with SE on solution for next hotfix, temp 
workaround is to shutdown what install is requesting in order to start the 
9.2.2 install.


Saurabh Bohra
O: 860-766-0842  |  M: 860-385-3597  |  e-mail: 
saurabh.bo...@espn.commailto:saurabh.bo...@espn.com

From: Cantwell, Rene D 
[mailto:rene.cantw...@ca.com]mailto:[mailto:rene.cantw...@ca.com]
Sent: Thursday, August 02, 2012 9:23 AM
To: spectrum
Subject: [spectrum] Spectrum 9.2 Service Pack SP02 (aka H08) is now available 
for customer download.


Hello Everyone,

Spectrum 9.2 Service Pack SP02 (aka H08) is now available for customer download.

A news item announcement with highlights of what is included in 9.2.2 can be 
found on our product home page at 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832%20 
.

Customers can download from two sources;
From support.ca.com - 
https://support.ca.com/irj/portal/anonymous/phpdocs?filePath=0/7832/7832_92_patchindex.html
From ftp.ca.comftp://ftp.ca.com - 
/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00

Since cutting the DVD iso image the Release Notice (SRN) has been updated with 
two additional special consideration items #21 and #22.  The Solaris PTF patch 
for #22 is available from the same ftp.ca.comftp://ftp.ca.com area as 9.2.2 
itself (/pub/CA-SPECTRUM/Updates/GA/Spectrum_09.02.02.00).

In addition to these two special considerations, the support team is working on 
the following issues with our sustaining engineering team;


1.Original DVD iso image was corrupt.

a.What is available today is good.

2.Solaris crash, found in late QA tests.

a.PTF_9.2.201 is available from ftp.ca.comftp://ftp.ca.com site mentioned 
above.

3.RedHat 5.8 crash after installing 9.2.2.

a.Temp workaround: replacing the default MTS version of the SpectroSERVER 
executable with the non-MTS version (shipped) resolves the problem. Please 
contact the support team if help is needed.

4.OneClick/Tomcat upgrade, tomcat will not start after upgrade.

a.Support actively working with SE on workaround, root cause and solution. 
Please contact the support team if you are experiencing this issue.

5.Install stopping running non-Spectrum mysql process.

a.Support actively working with SE on solution for next hotfix, temp 
workaround is to shutdown what install is requesting in order to start the 
9.2.2 install.



Here are the checksums for each of the ftp executables:

76ce64c40814139c2cf6a66c6dc0757e *Spectrum_09.02.02.00.201.Linux.txe
cb3e964081c38c88db7058fccac74d6c *Spectrum_09.02.02.00.201.Solaris.txe
4b395435d9577a9d0b77d3968693751a*Spectrum_09.02.02.00.201.Windows.exe
119f55b552ff36568b856dc2f8ed324d   *Spectrum_09.02.02.00.201.dist.tgz
9ec9bd012742c6ba1794265083750ef2 
*Spectrum_09.02.02.PTF_9.2.201.Solaris.txe



If you should have any specific concerns or questions regarding 9.2.2, please 
send them directly 

RE:[spectrum] Spectrum Web Services API and Alarm ID's

[Mark Serencha]

Sean Onion suggested use the global alarm ID attribute which solved my issue.
The variable is named $GLOBAL_ALARM_ID


From the CA Spectrum Infrastructure Manager AlarmNotifier User Guide 
(Spectrum_AlarmNotifier_User_ENU.pdf):

Global AlarmID

Specifies a unique numeric identifier assigned to the alarm by CA Spectrum. 
This differs from the AlarmID in that it is not just unique within the CA 
Spectrum environment, but can be passed as a unique identifier to other 
environments. This is useful when you need to pass a unique identifier to 
third-party software. An example of a Global AlarmID is 
406978f6-0336-1000-012c-000d5632d07e. By default, Global AlarmID is commented 
out in each of the scripts. For this parameter to be passed, the comment mark 
(#) must be removed.


Thanks Sean!
--Mark S

Mark Serencha – Inforonics Global Services, LLC – (m) +1-781-439-0519 
– Mark.Serencha_AT_inforonics.com


-Original Message-
From: Mark Serencha 
Sent: Thursday, June 07, 2012 12:38 PM
To: spectrum
Subject: Spectrum Web Services API and Alarm ID's

Hello Spectrum folks,

We are using alarm notifier to have Spectrum send alarm messages to a 
third-party ticketing system.
Our desire is to have the ticketing system use the Web Services API to 
acknowledge the alarm and insert the corresponding ticket number into Spectrum.

In order to ack and send the a ticket number to Spectrum, the ticket system 
will need to issue an HTTP “PUT” command to OneClick, of the form:

PUT 
'http://hostname/spectrum/restful/alarms/4fce5641-e7e1-10c7-029d-005056b0bcef?attr=0x12022val=ABC123attr=0x11f4dval=1'

This will send the ticket number ABC123 to the Spectrum alarm uniquely 
identified by the GUID 4fce5641-e7e1-10c7-029d-005056b0bcef
I have tested this method successfully in my lab with the curl command line 
program.

However, I've run into a problem.
The Web Services URL’s expect a GUID value for the alarm ID,
but the outbound email messages contain an integer value for the alarm ID 
(variable #5 passed to SetScript).

I am still researching how to translate one ID to the other, or if this 
translation can be done at all.
I will ask CA as well, but does anyone out there have any ideas ?

PS - the ticket system is BMC Remedy, in case someone has a better integration 
method in mind.
CA removed its own Remedy integration in v9.0.

Thank you,
--Mark S

Mark Serencha – Inforonics Global Services, LLC – (m) +1-781-439-0519 –  
Mark.Serencha_AT_inforonics.com 


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum Config Manager

[Ellis, Christopher (cellis03)]

They can do this with policies on current devices, but with older captures have 
you been using the option in NCM Export Configurations?  If so you can search 
these files with scripts or either grep to find the info.

-Original Message-
From: Jon Magnus Dullerud [mailto:dulle...@gmail.com] 
Sent: Thursday, May 31, 2012 3:15 AM
To: spectrum
Subject: [spectrum] Spectrum Config Manager

Hi all
We have been using the configuration manager for a while. 
We use it to backup our configs and to bulk update config changes.

Some of my colleagues wants to be able to search for text in old configs, for 
example they want to be sure that an ip address is not in use, or they want to 
know where the ip address was used last. 
Do anyone know how to do this?

All the best.
Jon Magnus Dullerud
Norwegian Defence
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum celli...@harris.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] [Spectrum] Is posible add new licenses ?

[Diego Pereyra]

I can also user the condition

if( userSec.hasPrivilege( Privileges.CONSOLE_PRIV_SCOPE,
 Privileges.WEB_SERVER_ADMIN ) == true )
   {

The privilege WEB_SERVER_ADMIN is from a privilege configure on oneclick? 
Anyone add some privilege else ?

I try using some custom privileges but doesnt work... if someone have any ideas 
:D

THanks

Diego

-Mensaje original-
De: Diego Pereyra [mailto:dpere...@netsol-international.com] 
Enviado el: miércoles, 02 de mayo de 2012 11:15
Para: spectrum
Asunto: [spectrum] [Spectrum] Is posible add new licenses ?

Hi list !

Im editing the console-menubar.jsp to add some new menú for others 
applications, and i want to user priveleges or roles to show or not the links. 
But i only can use LICENCES. Administrator, Operator, Service Manager.. 

!-- only show if administrator or operator --
  % if ( request.isUserInRole(Administrator) == true ||
  request.isUserInRole(Operator) == true )
 { %

Anyone try to add new licences or how can i get the role or privelege in the 
web?

Thanks!

diEgo MP.

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum dpere...@netsol-international.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] [Spectrum] Is posible add new licenses ?

[Bohra, Saurabh]

You can control whatever you want using custom-priviliges.xml. that should be 
available for all licenses.


I am attaching an old custom privilege file (as txt) for reference.


Let me know if it helps.


Saurabh Bohra
O: 860-766-0842  |  M: 860-385-3597  |  e-mail: saurabh.bo...@espn.com

-Original Message-
From: Diego Pereyra [mailto:dpere...@netsol-international.com] 
Sent: Wednesday, May 02, 2012 11:44 AM
To: spectrum
Subject: RE: [spectrum] [Spectrum] Is posible add new licenses ?

I can also user the condition

if( userSec.hasPrivilege( Privileges.CONSOLE_PRIV_SCOPE,
 Privileges.WEB_SERVER_ADMIN ) == true )
   {

The privilege WEB_SERVER_ADMIN is from a privilege configure on oneclick? 
Anyone add some privilege else ?

I try using some custom privileges but doesnt work... if someone have any ideas 
:D

THanks

Diego

-Mensaje original-
De: Diego Pereyra [mailto:dpere...@netsol-international.com] 
Enviado el: miércoles, 02 de mayo de 2012 11:15
Para: spectrum
Asunto: [spectrum] [Spectrum] Is posible add new licenses ?

Hi list !

Im editing the console-menubar.jsp to add some new menú for others 
applications, and i want to user priveleges or roles to show or not the links. 
But i only can use LICENCES. Administrator, Operator, Service Manager.. 

!-- only show if administrator or operator --
  % if ( request.isUserInRole(Administrator) == true ||
  request.isUserInRole(Operator) == true )
 { %

Anyone try to add new licences or how can i get the role or privelege in the 
web?

Thanks!

diEgo MP.

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum dpere...@netsol-international.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum saurabh.bo...@espn.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com
!-- ##
# Author:   Saurabh Bohra
# e-mail:   sbo...@netcom-sys.com
# 
# File Name:custom-privileges.xml
#
# Purpose:  Additional privileges for Web Administration, Non-Persistent 
Connection 
#   Setup and Locator search from OneClick on SPECTRUM 9.0.0 HF 6.
#
# Location: $SPECROOT/custom/console/config on OneClick server
# 
# Usage:On OneClick server at $SPECROOT/custom/console/config 
independently 
#   and/or in conjunction with custom-privileges.xml
#   Note: If upgrading/applying a new hotfix please refer to the 
Readme
#   to verify whether these customization has been incorporated 
out-of-box
#   in the new release. If incorporated remove the sections 
accordingly.
#
# Reference:SPECTRUM OneClick Customization Guide (5160)
#
# Version:  1.0.0 - 11/17/2009 -Initial version. Create privileges for 
Web Administration,
#   NPC and Locator Search.
#   1.0.1 - 11/17/2009 -Remove OOB privileges for eVPN, NCM, 
SANM, VHM
#   1.1.0 - 12/01/2009 -Privilege SPECTRUM Report Manager
#   1.1.1 - 01/06/2010 -Privilege Chassis Locator Search
#   1.1.2 - 01/07/2010 -Privilege Additional Custom Searches
#
###
--

privileges
  custom-privileges
labelAdditional Custom Privileges/label
descCustom privileges for users./desc

web-admin type=read
  labelWeb Administration/label
  descGrants access to Web Administration to a device./desc
/web-admin

npcs type=read
  labelNon-Persistent Connection Setup/label
  descGrants access to Non-Persistent Connection Setup for a 
device./desc
/npcs

srm type=read
  labelSPECTRUM Report Manager/label
  descGrants access to SPECTRUM Report Manager to a user./desc
/srm

search-privileges
  labelLocator Searches/label
  descGrant access to various Searches under Locator Tab./desc

  search-addcustom
labelAdditional Custom Searches/label
descGrant access to various Additional Custom Searches./desc
search-cust-users type=read
  labelSearches for Customer Users/label
  descGrants access to Searches for Customer Users searches./desc
/search-cust-users

search-insight-users type=read
  labelSearches for Insight Users/label
  descGrants access to Searches for Insight Users searches./desc
/search-insight-users
  /search-addcustom

  search-app-models type=read
labelApplication Models/label
descGrants access to Application Models searches./desc
  /search-app-models

  search-chassis type=read
labelChassis/label
descGrants access to Chassis searches./desc
  /search-chassis

  search

RE: [spectrum] [Spectrum] Is posible add new licenses ?

[Diego Pereyra]

Thanks you

-Mensaje original-
De: Bohra, Saurabh [mailto:saurabh.bo...@espn.com] 
Enviado el: miércoles, 02 de mayo de 2012 13:10
Para: Diego Pereyra; spectrum
Asunto: RE: [spectrum] [Spectrum] Is posible add new licenses ?

You can control whatever you want using custom-priviliges.xml. that should be 
available for all licenses.


I am attaching an old custom privilege file (as txt) for reference.


Let me know if it helps.


Saurabh Bohra
O: 860-766-0842  |  M: 860-385-3597  |  e-mail: saurabh.bo...@espn.com

-Original Message-
From: Diego Pereyra [mailto:dpere...@netsol-international.com] 
Sent: Wednesday, May 02, 2012 11:44 AM
To: spectrum
Subject: RE: [spectrum] [Spectrum] Is posible add new licenses ?

I can also user the condition

if( userSec.hasPrivilege( Privileges.CONSOLE_PRIV_SCOPE,
 Privileges.WEB_SERVER_ADMIN ) == true )
   {

The privilege WEB_SERVER_ADMIN is from a privilege configure on oneclick? 
Anyone add some privilege else ?

I try using some custom privileges but doesnt work... if someone have any ideas 
:D

THanks

Diego

-Mensaje original-
De: Diego Pereyra [mailto:dpere...@netsol-international.com] 
Enviado el: miércoles, 02 de mayo de 2012 11:15
Para: spectrum
Asunto: [spectrum] [Spectrum] Is posible add new licenses ?

Hi list !

Im editing the console-menubar.jsp to add some new menú for others 
applications, and i want to user priveleges or roles to show or not the links. 
But i only can use LICENCES. Administrator, Operator, Service Manager.. 

!-- only show if administrator or operator --
  % if ( request.isUserInRole(Administrator) == true ||
  request.isUserInRole(Operator) == true )
 { %

Anyone try to add new licences or how can i get the role or privelege in the 
web?

Thanks!

diEgo MP.

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum dpere...@netsol-international.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum saurabh.bo...@espn.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum 9.2 H07

[Srinivas, Kothapalli Kalyan]

Hi Eugen,

I suggest to go for H07 only if you have any bugs which were not fixed in H06. 
H07 is a lighter version which includes couple of fixes.

Kothapalli Kalyan Srinivas
CA Technologies
Support Engineer
Tel:  +91 40 66877594
kothapallikalyan.srini...@ca.com
mailto:kothapallikalyan.srini...@ca.com[Description: C:\Program 
Files\CA\GIS\CASig\CA_email.gif]http://www.ca.com/
From: joseph.pou...@americas.bnpparibas.com 
[mailto:joseph.pou...@americas.bnpparibas.com]
Sent: Monday, April 23, 2012 7:30 PM
To: spectrum
Subject: Re: [spectrum] Spectrum 9.2 H07

Per the Readme it is cumulative the H06, but does not include all the patches 
that were created on top of H06.
If you have H06 plus additional patches, check the H07 Readme to ensure all 
your additional patches are included.

Joe Poutre
BNP Paribas




 I believe the hot fixes are cumulative.  You should be good with
 installing just H07.

 -Ken

 On Apr 22, 2012, at 4:22 PM, Naiman, Eugen (DHHS) wrote:

 Hi,

 I've been wondering if H06 is included in H07?

 Do I need to apply first H06?

 Thanks,

 Regards,
 
 Eugen NAIMAN
 IT Officer
 ICT Infrastructure
 Department Health and Human Services
  5/99 Bathurst Street, Hobart, 7000
  (:  (03) 6233 8565
   Ê:  (03) 6233 6297
 eugen.nai...@dhhs.tas.gov.aumailto:eugen.nai...@dhhs.tas.gov.au
 


 CONFIDENTIALITY NOTICE AND DISCLAIMER
 The information in this transmission may be confidential and/or
 protected by legal professional privilege, and is intended only for
 the person or persons to whom it is addressed. If you are not such a
 person, you are warned that any disclosure, copying or dissemination
 of the information is unauthorised. If you have received the
 transmission in error, please immediately contact this office by
 telephone, fax or email, to inform us of the error and to enable
 arrangements to be made for the destruction of the transmission, or
 its return at our cost. No liability is accepted for any
 unauthorised use of the information contained in this transmission.
 --To unsubscribe from spectrum, send email to 
 lists...@unc.edumailto:lists...@unc.edu with
 the body: unsubscribe spectrum k...@kirchners.commailto:k...@kirchners.com

 --To unsubscribe from spectrum, send email to 
 lists...@unc.edumailto:lists...@unc.edu with
 the body: unsubscribe spectrum 
 joseph.pou...@americas.bnpparibas.commailto:joseph.pou...@americas.bnpparibas.com

This message and any attachments (the message) is intended solely for
the addressees and is confidential. If you receive this message in error,
please delete it and immediately notify the sender. Any use not in accord
with its purpose, any dissemination or disclosure, either whole or partial,
is prohibited except formal approval. The internet can not guarantee the
integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will)
not therefore be liable for the message if modified. Please note that certain
functions and services for BNP Paribas may be performed by BNP Paribas RCC, Inc.

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
kothapallikalyan.srini...@ca.commailto:kothapallikalyan.srini...@ca.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.gif

Re: [spectrum] Spectrum 9.2 H07

[joseph . poutre]

Per the Readme it is cumulative the H06, but does not include all the 
patches that were created on top of H06.
If you have H06 plus additional patches, check the H07 Readme to ensure 
all your additional patches are included.

Joe Poutre
BNP Paribas



 
 I believe the hot fixes are cumulative.  You should be good with 
 installing just H07.
 
 -Ken
 
 On Apr 22, 2012, at 4:22 PM, Naiman, Eugen (DHHS) wrote:
 
 Hi,
 
 I?ve been wondering if H06 is included in H07?
 
 Do I need to apply first H06?
 
 Thanks,
 
 Regards,
 
 Eugen NAIMAN
 IT Officer
 ICT Infrastructure
 Department Health and Human Services 
  5/99 Bathurst Street, Hobart, 7000 
  (:  (03) 6233 8565 
   Ê:  (03) 6233 6297 
 eugen.nai...@dhhs.tas.gov.au
 
 
 
 CONFIDENTIALITY NOTICE AND DISCLAIMER
 The information in this transmission may be confidential and/or 
 protected by legal professional privilege, and is intended only for 
 the person or persons to whom it is addressed. If you are not such a
 person, you are warned that any disclosure, copying or dissemination
 of the information is unauthorised. If you have received the 
 transmission in error, please immediately contact this office by 
 telephone, fax or email, to inform us of the error and to enable 
 arrangements to be made for the destruction of the transmission, or 
 its return at our cost. No liability is accepted for any 
 unauthorised use of the information contained in this transmission.
 --To unsubscribe from spectrum, send email to lists...@unc.edu with 
 the body: unsubscribe spectrum k...@kirchners.com
 
 --To unsubscribe from spectrum, send email to lists...@unc.edu with 
 the body: unsubscribe spectrum joseph.pou...@americas.bnpparibas.com 


This message and any attachments (the message) is intended solely for 
the addressees and is confidential. If you receive this message in error, 
please delete it and immediately notify the sender. Any use not in accord 
with its purpose, any dissemination or disclosure, either whole or partial, 
is prohibited except formal approval. The internet can not guarantee the 
integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will) 
not therefore be liable for the message if modified. Please note that certain 
functions and services for BNP Paribas may be performed by BNP Paribas RCC, Inc.

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum Heartbeat Event

[Bohra, Saurabh]

Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
acceptlanguage: en-US
Content-Type: multipart/alternative;
boundary=_000_60F3B01FFC637744B6F2C90A0AE35169036ED611XCHGBRS6corpesp_
MIME-Version: 1.0

--_000_60F3B01FFC637744B6F2C90A0AE35169036ED611XCHGBRS6corpesp_
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: quoted-printable

All,

I found an interesting example at $SPECROOT/CsVendor/Concord/EventDisp file=
 for eHealth integration server heartbeat rule. This starts making more sen=
se now, however I am still unable to find how event 0x05420053 gets generat=
ed.

# eHealth integration server heartbeat rule. Once event 5420051 is sent for=
 the
# first time the rule will expect an 5420051 event at least every 95 second=
s
# (should be sent every 60 seconds, allow some delay),
# otherwise event 5420052 is generated, creating a critical alarm
# Receipt of event 5420053 will stop the rule
# Note that we also clear the 5420052 alarm when the heartbeat event is see=
n
0x05420051 C 0x5420052 R CA.Heartbeat, 0x5420051, 0x5420052 -:-, 95, 0x54=
20053

0x05420052 E 50 A 3,0x05420052
0x05420053 C 0x05420052


Saurabh Bohra
O: 860-766-0842  |  M: 860-385-3597  |  e-mail: saurabh.bo...@espn.com

From: Bohra, Saurabh
Sent: Tuesday, April 03, 2012 4:56 PM
To: 'Pfleger, Jim'; spectrum
Subject: RE: [spectrum] Spectrum Heartbeat Event

I forgot to mention in my previous email, I also have a rule for event Z wh=
ich raised Critical alarm in Spectrum as follows

0x4cd9006b A 3,0x4cd90060

I noticed an interesting thing, I stopped the hearbeat traps which I was ge=
nerating, as expected Spectrum generated Event Z (0x4cd9006b) and copied al=
l the variables of last event I (0x4cd90060) which generated alarm for me. =
After that Spectrum kept generating Event Z (0x4cd9006b) every one minute t=
ill it again started receiving heartbeat traps.  I was expecting just 1 eve=
nt Z to occur.

Saurabh Bohra
O: 860-766-0842  |  M: 860-385-3597  |  e-mail: saurabh.bo...@espn.commail=
to:saurabh.bo...@espn.com

From: Pfleger, Jim [mailto:jim.pfle...@insight.com]mailto:[mailto:Jim.Pfle=
g...@insight.com]
Sent: Tuesday, April 03, 2012 4:02 PM
To: spectrum
Subject: Re: [spectrum] Spectrum Heartbeat Event

I'm going to guess that the event variable specification is similar to the =
number after the E - expected by the parser, but not used by anything els=
e.


On 4/3/12 12:59 PM, Bohra, Saurabh saurabh.bo...@espn.com wrote:
Group,

Spectrum 9.2 SP1

I have a question about heartbeat traps rule,


I created an Heartbeat event for instantiating event I=3D0x4cd90060 which c=
hecks for the periodic occurrence for event H=3D 0x4cd90060 (itself).

For event H why are we copying 1 or more or all variables? If we miss the=
 Heartbeat trap how can we do something with its varbind - or am I missing =
something here?


As per documentation the rule will look like follows:

eventcode E eventSeverity eventRule, H , Z, P, S

0x4cd90060 E 20 R CA.Heartbeat, 0x4cd90060 -:-, 0x4cd9006b -:-, 60, 0x1=



Thanks,

Saurabh Bohra
Sr. Network Mgmt Systems Analyst
ESPN Inc.
O: 860-766-0842  |  M: 860-385-3597  |  e-mail: saurabh.bo...@espn.com


 *   --To unsubscribe from spectrum, send email to lists...@unc.edu with th=
e body: unsubscribe spectrum jim.pfle...@insight.com


 *   --To unsubscribe from spectrum, send email to lists...@unc.edumailto:=
lists...@unc.edu with the body: unsubscribe spectrum saurabh.bo...@espn.co=
mmailto:saurabh.bo...@espn.com

--_000_60F3B01FFC637744B6F2C90A0AE35169036ED611XCHGBRS6corpesp_
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: quoted-printable

html xmlns:v=3Durn:schemas-microsoft-com:vml xmlns:o=3Durn:schemas-micr=
osoft-com:office:office xmlns:w=3Durn:schemas-microsoft-com:office:word =
xmlns:x=3Durn:schemas-microsoft-com:office:excel xmlns:m=3Dhttp://schema=
s.microsoft.com/office/2004/12/omml xmlns=3Dhttp://www.w3.org/TR/REC-html=
40headmeta http-equiv=3DContent-Type content=3Dtext/html; charset=3Du=
s-asciimeta name=3DGenerator content=3DMicrosoft Word 14 (filtered medi=
um)titleRe: [spectrum] Spectrum Heartbeat Event/titlestyle!--
/* Font Definitions */
@font-face
{font-family:Wingdings;
panose-1:5 0 0 0 0 0 0 0 0 0;}
@font-face
{font-family:Wingdings;
panose-1:5 0 0 0 0 0 0 0 0 0;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:Times New Roman,serif;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
p.MsoAcetate, li.MsoAcetate

Re: [spectrum] Spectrum Heartbeat Event

[Pfleger, Jim]

I'm going to guess that the event variable specification is similar to the 
number after the E - expected by the parser, but not used by anything else.


On 4/3/12 12:59 PM, Bohra, Saurabh saurabh.bo...@espn.com wrote:

Group,

Spectrum 9.2 SP1

I have a question about heartbeat traps rule,


I created an Heartbeat event for instantiating event I=0x4cd90060 which checks 
for the periodic occurrence for event H= 0x4cd90060 (itself).

For event H why are we copying 1 or more or all variables? If we miss the 
Heartbeat trap how can we do something with its varbind - or am I missing 
something here?


As per documentation the rule will look like follows:

eventcode E eventSeverity eventRule, H , Z, P, S

0x4cd90060 E 20 R CA.Heartbeat, 0x4cd90060 -:-, 0x4cd9006b -:-, 60, 0x1


Thanks,

Saurabh Bohra
Sr. Network Mgmt Systems Analyst
ESPN Inc.
O: 860-766-0842  |  M: 860-385-3597  |  e-mail: saurabh.bo...@espn.com


 *   --To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum jim.pfle...@insight.com


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum Heartbeat Event

[Bohra, Saurabh]

I forgot to mention in my previous email, I also have a rule for event Z which 
raised Critical alarm in Spectrum as follows

0x4cd9006b A 3,0x4cd90060

I noticed an interesting thing, I stopped the hearbeat traps which I was 
generating, as expected Spectrum generated Event Z (0x4cd9006b) and copied all 
the variables of last event I (0x4cd90060) which generated alarm for me. After 
that Spectrum kept generating Event Z (0x4cd9006b) every one minute till it 
again started receiving heartbeat traps.  I was expecting just 1 event Z to 
occur.

Saurabh Bohra
O: 860-766-0842  |  M: 860-385-3597  |  e-mail: saurabh.bo...@espn.com

From: Pfleger, Jim [mailto:jim.pfle...@insight.com]
Sent: Tuesday, April 03, 2012 4:02 PM
To: spectrum
Subject: Re: [spectrum] Spectrum Heartbeat Event

I'm going to guess that the event variable specification is similar to the 
number after the E - expected by the parser, but not used by anything else.


On 4/3/12 12:59 PM, Bohra, Saurabh saurabh.bo...@espn.com wrote:
Group,

Spectrum 9.2 SP1

I have a question about heartbeat traps rule,


I created an Heartbeat event for instantiating event I=0x4cd90060 which checks 
for the periodic occurrence for event H= 0x4cd90060 (itself).

For event H why are we copying 1 or more or all variables? If we miss the 
Heartbeat trap how can we do something with its varbind - or am I missing 
something here?


As per documentation the rule will look like follows:

eventcode E eventSeverity eventRule, H , Z, P, S

0x4cd90060 E 20 R CA.Heartbeat, 0x4cd90060 -:-, 0x4cd9006b -:-, 60, 0x1


Thanks,

Saurabh Bohra
Sr. Network Mgmt Systems Analyst
ESPN Inc.
O: 860-766-0842  |  M: 860-385-3597  |  e-mail: saurabh.bo...@espn.com


 *   --To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum jim.pfle...@insight.com


 *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
saurabh.bo...@espn.commailto:saurabh.bo...@espn.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum Watch for % variation in traffic use

[Cashell, Christopher P.]

This sounds like more of an eHealth function.  Spectrum does a pretty good job 
of knowing what the state of the world is right now, but it has a very short 
attention span.  It doesn't do well with what things were like a few minutes 
ago.  You can monitor traffic changes, to a reasonable extent, in eHealth 
though.

--
Christopher Cashell

From: Jason Hebron [mailto:jason.heb...@gmail.com]
Sent: Sunday, February 26, 2012 8:31 PM
To: spectrum
Subject: [spectrum] Spectrum Watch for % variation in traffic use

Hi
Just delving into Watches and am perfectly happy with simply polling attribute 
watches however I am looking for a pointer or two with relation to a new watch 
I need to create
Its a fairly simple on - I need a watch that shows traffic variation use on a 
port (both in and out) over 2 or more readings
Initially looking for a 10% drop in traffic  (as a test) over a 5 minute 
polling cycle - with maybe an option to say only alert if 2 polling cycles both 
have a 10% drop in traffic

Any pointers appreciated

 *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
cpcash...@west.commailto:cpcash...@west.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum Reporting in Fault Tolerant Environment.

[Divakar J]

Hi cristi,

Is it possible turn on the archeive manager when the spectroserver is
stopped and also what can be done if the server is totally shut down, is
there any possibilty to generate the report.

Regards,

Divakar.J

On Mon, Feb 27, 2012 at 1:31 PM, Cristi Mitrana 
cristi.mitr...@solvitnetworks.com wrote:



 - Original Message -
  Hi,
 
  Primary Server Setup:-
 
  1. Primary spectroserver, primary one click, and boxi in separate
  servers.
 
  Secondary Server Setup:-
 
  1. Secondary spectroserver and one click in a same machine.
 
  Scenario:-
 
  When the primary spectroserver is failed. The devices are monitored
  by secondary spectroserver, and the events are cached locally by the
  secondary spectroserver. If i generate a report from the primary
  oneclick server when the primary spectroserver is down, it gives
  100% availability for all devices, and also no alarms are showing in
  alarm report.
 

  Report Manager reports on the data it gets from Archive Manager (on the
 MLS), so as long as the Archive Manager is down on the MLS you won't be
 able to get the events from the secondary.
  You need to bring the primary SS and Archive Manager online (or at least
 the Archive Manager) to be able to generate up-to-date reports in SRM.

  regards,
 --
 Cristi Mitrana


 ---
 To unsubscribe from spectrum, send email to lists...@unc.edu with the
 body: unsubscribe spectrum diva...@gcl.in




-- 
Regards,
Divakar.J
Systems Engr
diva...@gcl.in
+91-9840-509-440

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum Fault Tolerant - Archive Manager

[Bohra, Saurabh]

What will happen if the archive manager is running on the secondary when the 
primary is down - When Archive manager of primary server is started followed 
by Spectroserver comes all the events collected on the secondary server will 
not be synchronized back to the primary. I have not sure whether the SRM on 
Oneclick will have the events for reporting.

Saurabh Bohra
O: 860-766-0842  |  M: 860-385-3597  |  e-mail: saurabh.bo...@espn.com

-Original Message-
From: kavi arasu [mailto:kaviaras...@gmail.com] 
Sent: Friday, February 24, 2012 7:34 AM
To: spectrum
Subject: [spectrum] Spectrum Fault Tolerant - Archive Manager

Hi,

When the primary spectroserver is down, the Secondary spectoserver will cache 
the events and push back to Primary Archive Manager when its alive.

What will happen if the archive manager is running on the secondary when the 
primary is down.

Regards,
Kavi
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum saurabh.bo...@espn.com

Please consider the environment before printing this e-mail.

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum Reporting in Fault Tolerant Environment.

[Cristi Mitrana]

- Original Message -
 Hi,
 
 Primary Server Setup:-
 
 1. Primary spectroserver, primary one click, and boxi in separate
 servers.
 
 Secondary Server Setup:-
 
 1. Secondary spectroserver and one click in a same machine.
 
 Scenario:-
 
 When the primary spectroserver is failed. The devices are monitored
 by secondary spectroserver, and the events are cached locally by the
 secondary spectroserver. If i generate a report from the primary
 oneclick server when the primary spectroserver is down, it gives
 100% availability for all devices, and also no alarms are showing in
 alarm report.
 
  
 Report Manager reports on the data it gets from Archive Manager (on the MLS), 
so as long as the Archive Manager is down on the MLS you won't be able to get 
the events from the secondary.
 You need to bring the primary SS and Archive Manager online (or at least the 
Archive Manager) to be able to generate up-to-date reports in SRM.
 
 regards,
-- 
Cristi Mitrana


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum Fault Tolerant - Archive Manager

[Olliver, Roderick]

Kavi,

Events are cached in a queue, with Archive Manager consuming events from
this.  If you have an ArchMgr running on the secondary, it will remove
events from this queue.  When the primary comes up, it will find no
events to queue, so will start consuming from the primary.

Also causes issues when there are two ArchMgrs started as the secondary
will connect to the primary - luck determines which ArchMgr will get
each event.

There isn't a sync between the ArchMgrs other than the DDM backup
(primary copied to secondary).

Cheers   -   Rod

-Original Message-
From: kavi arasu [mailto:kaviaras...@gmail.com] 
Sent: February 24, 2012 7:34 AM
To: spectrum
Subject: [spectrum] Spectrum Fault Tolerant - Archive Manager
Importance: Low

Hi,

When the primary spectroserver is down, the Secondary spectoserver will
cache the events and push back to Primary Archive Manager when its
alive. 

What will happen if the archive manager is running on the secondary when
the primary is down.

Regards,
Kavi
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the
body: unsubscribe spectrum roderick.olli...@rbc.com
___

This email may be privileged and/or confidential, and the
sender does not waive any related rights and obligations.
Any distribution, use or copying of this email or the
information it contains by other than an intended recipient
is unauthorized. If you received this email in error,
please advise the sender (by return email or otherwise)
immediately. You have consented to receive the attached
electronically at the above-noted email address; please retain a
copy of this confirmation for future reference.

Ce courriel est confidentiel et protégé. L'expéditeur ne renonce
pas aux droits et obligations qui s'y rapportent. Toute diffusion,
utilisation ou copie de ce courriel ou des renseignements qu'il
contient par une personne autre que le (les) destinataire(s)
désigné(s) est interdite. Si vous recevez ce courriel par erreur,
veuillez en aviser l'expéditeur immédiatement, par retour de courriel
ou par un autre moyen. Vous avez accepté de recevoir le(s) document(s)
ci-joint(s) par voie électronique à l'adresse courriel indiquée ci-dessus;
veuillez conserver une copie de cette confirmation pour les fins de reference 
future.

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

[spectrum] RE: [spectrum] Spectrum 9.2 on VMWare

[Ivana.Kvaka]

Hi Arnold, hi list,


We're having Spectrum 9.2 on vmware
and actually it's not working fine. SS is throwing CORBA performance errors
when more load is coming from OC. I want to isolate where is the problem,
in Spectrum or VMware.
How can I determine if problem is on
virtual environment? I must say that customer prepared all virtual machines
so we don't see how it's configuration looks like.


regards,
Ivana



From:   
Arnold Jeffrey
(ZA) arnold.jeff...@za.didata.com
To:   
spectrum
spectrum@listserv.unc.edu
Date:   
10.02.2011 08:55
Subject:  
 RE: [spectrum]
Spectrum 9.2 on VMWare




Hi Vincent, 
We have Spectrum and Report Manager running on VM's and they are doing
fine with DEDICATED resources from the ESX server.
The only problems we have encountered is with the people managing the virtual
environments : they tend to use dynamic resource allocation ( CPU
and RAM ) in a Data centre and this does not work well : ensure that
RAM and CPU's are DEDICATED to each SpectroServer at all times.

Regards
Arnold Jeffrey
Software Support engineer,
Dimension Data

-Original Message-
From: Vincent Nguyen [mailto:vincent.ngu...@mesaaz.gov]

Sent: 10 February 2011 02:52 AM
To: spectrum
Subject: [spectrum] Spectrum 9.2 on VMWare

Hi everyone,

Thank you for your time on this matter. We plan to upgrade our Spectrum
to 9.2 on a VMware box and OneClick/BOXI is running another VMware. Does
anyone have any issue on the performance or any recommendation that we
need to aware of?

Thank you,

Vincent Nguyen
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body:
unsubscribe spectrum arnold.jeff...@za.didata.com

This email and all contents are subject to the following disclaimer:

http://www.dimensiondata.com/emaildisclaimer

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body:
unsubscribe spectrum ivana.kv...@sedamit.hr


Napomena: 
Ova poruka sadrzi podatke povjerljive prirode, iskljucivo namijenjene osobama oznacenima kao primateljima te se pristup od strane bilo koje druge osobe smatra neovlastenim.  Ukoliko niste oznaceni primatelj, svaka distribucija, kopiranje, umnozavanje ili otkrivanje sadrzaja trecim osobama je strogo zabranjeno i smatra se protuzakonitim.  Ukoliko ste dobili ovu poruku, a niste oznaceni primatelj, molimo Vas da sto prije obavijestite posiljatelja poruke i unistite sve postojece kopije. Ova napomena takodjer potvrdjuje da je ova elektronicka poruka testirana na postojanje racunalnih virusa. 

Disclaimer: 
The information in this email is confidential and it is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any distribution, copying, duplication or disclosure is prohibited and may be unlawful.  If you have received this email in error, please notify the sender immediately and destroy it, and all copies of it. This footnote also confirms that this email message has been swept for the presence of computer viruses.




 --To unsubscribe from spectrum, send email to lists...@unc.edu with the body: unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] RE: [spectrum] Spectrum 9.2 on VMWare

[Cantwell, Rene D]

Have you installed the latest hotfix patch H06?  If not, you may first want to 
consider installing it.  There are several changes made to Spectrum’s use of 
the CORBA interface that could take care of the performance issues you are 
seeing.

Here’s the direct ftp link to the H06 area where you can get a copy of the 
release note for further details;
/pub/CA-SPECTRUM/Updates/Non-GA/Spectrum_09.02.01.H06

After installing H06 or if you already have it installed on all systems in the 
environment, if you are still having problems, then a support issue should be 
opened so we can help determine if it’s Spectrum or the VMware environment or 
setup.

Regards,
Rene’


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
mailto:rene.cantw...@ca.com[Description: 
Picture]javascript:ClickThumbnail(76)

From: ivana.kv...@sedamit.hr [mailto:ivana.kv...@sedamit.hr]
Sent: Wednesday, January 11, 2012 12:02 PM
To: spectrum
Cc: spectrum
Subject: [spectrum] RE: [spectrum] Spectrum 9.2 on VMWare

Hi Arnold, hi list,


We're having Spectrum 9.2 on vmware and actually it's not working fine. SS is 
throwing CORBA performance errors when more load is coming from OC. I want to 
isolate where is the problem, in Spectrum or VMware.
How can I determine if problem is on virtual environment? I must say that 
customer prepared all virtual machines so we don't see how it's configuration 
looks like.


regards,
Ivana



From:Arnold Jeffrey (ZA) 
arnold.jeff...@za.didata.commailto:arnold.jeff...@za.didata.com
To:spectrum 
spectrum@listserv.unc.edumailto:spectrum@listserv.unc.edu
Date:10.02.2011 08:55
Subject:RE: [spectrum] Spectrum 9.2 on VMWare




Hi Vincent,
We have Spectrum and Report Manager running on VM's and they are doing fine 
with DEDICATED resources from the ESX server.
The only problems we have encountered is with the people managing the virtual 
environments :  they tend to use dynamic resource allocation ( CPU and RAM ) in 
a Data centre and this does not work well :  ensure that RAM and CPU's are 
DEDICATED to each SpectroServer at all times.

Regards
Arnold Jeffrey
Software Support engineer,
Dimension Data

-Original Message-
From: Vincent Nguyen [mailto:vincent.ngu...@mesaaz.gov]
Sent: 10 February 2011 02:52 AM
To: spectrum
Subject: [spectrum] Spectrum 9.2 on VMWare

Hi everyone,

Thank you for your time on this matter. We plan to upgrade our Spectrum to 9.2 
on a VMware box and OneClick/BOXI is running another VMware. Does anyone have 
any issue on the performance or any recommendation that we need to aware of?

Thank you,

Vincent Nguyen
---
To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
arnold.jeff...@za.didata.commailto:arnold.jeff...@za.didata.com

This email and all contents are subject to the following disclaimer:

http://www.dimensiondata.com/emaildisclaimer;

---
To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
ivana.kv...@sedamit.hrmailto:ivana.kv...@sedamit.hr

Napomena: Ova poruka sadrzi podatke povjerljive prirode, iskljucivo namijenjene 
osobama oznacenima kao primateljima te se pristup od strane bilo koje druge 
osobe smatra neovlastenim. Ukoliko niste oznaceni primatelj, svaka 
distribucija, kopiranje, umnozavanje ili otkrivanje sadrzaja trecim osobama je 
strogo zabranjeno i smatra se protuzakonitim. Ukoliko ste dobili ovu poruku, a 
niste oznaceni primatelj, molimo Vas da sto prije obavijestite posiljatelja 
poruke i unistite sve postojece kopije. Ova napomena takodjer potvrdjuje da je 
ova elektronicka poruka testirana na postojanje racunalnih virusa.

Disclaimer: The information in this email is confidential and it is intended 
solely for the addressee. Access to this email by anyone else is unauthorized. 
If you are not the intended recipient, any distribution, copying, duplication 
or disclosure is prohibited and may be unlawful. If you have received this 
email in error, please notify the sender immediately and destroy it, and all 
copies of it. This footnote also confirms that this email message has been 
swept for the presence of computer viruses.


  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
rene.cantw...@ca.commailto:rene.cantw...@ca.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com
inline: image001.jpg

Re: [spectrum] RE: [spectrum] Spectrum 9.2 on VMWare

[Robert Borowicz]

Upgrade to H06. I had severe Corba performance issues and this solved 
them for me.

Previously CA dealt with Corba issues in Spectrum code with 9.2.1 (H05?) 
but in H06 they actually also replaced Corba (libraries from Vendor 
Visibroker?)  which solved the issue for me.

-Robert


On 1/11/2012 11:02 AM, ivana.kv...@sedamit.hr wrote:
 Hi Arnold, hi list,


 We're having Spectrum 9.2 on vmware and actually it's not working 
 fine. SS is throwing CORBA performance errors when more load is coming 
 from OC. I want to isolate where is the problem, in Spectrum or VMware.
 How can I determine if problem is on virtual environment? I must say 
 that customer prepared all virtual machines so we don't see how it's 
 configuration looks like.


 regards,
 Ivana



 From: Arnold Jeffrey (ZA) arnold.jeff...@za.didata.com
 To: spectrum spectrum@listserv.unc.edu
 Date: 10.02.2011 08:55
 Subject: RE: [spectrum] Spectrum 9.2 on VMWare
 



 Hi Vincent,
 We have Spectrum and Report Manager running on VM's and they are doing 
 fine with DEDICATED resources from the ESX server.
 The only problems we have encountered is with the people managing the 
 virtual environments :  they tend to use dynamic resource allocation ( 
 CPU and RAM ) in a Data centre and this does not work well :  ensure 
 that RAM and CPU's are DEDICATED to each SpectroServer at all times.

 Regards
 Arnold Jeffrey
 Software Support engineer,
 Dimension Data

 -Original Message-
 From: Vincent Nguyen [mailto:vincent.ngu...@mesaaz.gov]
 Sent: 10 February 2011 02:52 AM
 To: spectrum
 Subject: [spectrum] Spectrum 9.2 on VMWare

 Hi everyone,

 Thank you for your time on this matter. We plan to upgrade our 
 Spectrum to 9.2 on a VMware box and OneClick/BOXI is running another 
 VMware. Does anyone have any issue on the performance or any 
 recommendation that we need to aware of?

 Thank you,

 Vincent Nguyen
 ---
 To unsubscribe from spectrum, send email to lists...@unc.edu with the 
 body: unsubscribe spectrum arnold.jeff...@za.didata.com

 This email and all contents are subject to the following disclaimer:

 http://www.dimensiondata.com/emaildisclaimer;

 ---
 To unsubscribe from spectrum, send email to lists...@unc.edu with the 
 body: unsubscribe spectrum ivana.kv...@sedamit.hr


 Napomena: Ova poruka sadrzi podatke povjerljive prirode, iskljucivo 
 namijenjene osobama oznacenima kao primateljima te se pristup od 
 strane bilo koje druge osobe smatra neovlastenim. Ukoliko niste 
 oznaceni primatelj, svaka distribucija, kopiranje, umnozavanje ili 
 otkrivanje sadrzaja trecim osobama je strogo zabranjeno i smatra se 
 protuzakonitim. Ukoliko ste dobili ovu poruku, a niste oznaceni 
 primatelj, molimo Vas da sto prije obavijestite posiljatelja poruke i 
 unistite sve postojece kopije. Ova napomena takodjer potvrdjuje da je 
 ova elektronicka poruka testirana na postojanje racunalnih virusa.

 Disclaimer: The information in this email is confidential and it is 
 intended solely for the addressee. Access to this email by anyone else 
 is unauthorized. If you are not the intended recipient, any 
 distribution, copying, duplication or disclosure is prohibited and may 
 be unlawful. If you have received this email in error, please notify 
 the sender immediately and destroy it, and all copies of it. This 
 footnote also confirms that this email message has been swept for the 
 presence of computer viruses.

   * --To unsubscribe from spectrum, send email to lists...@unc.edu
 mailto:lists...@unc.edu with the body: unsubscribe spectrum
 rshe...@gmail.com



---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] RE: [spectrum] Spectrum 9.2 on VMWare

[Pfleger, Jim]

We had this exact problem running Spectrum on VMware. Our issue turned out to 
be high I/O wait times due to poor SAN performance. You can easily check this 
with sar, which you should have running on all your Unix systems if you don't 
already. Anything that causes the VM to not get enough real CPU time will 
result in these CORBA errors though, so you should also look at the metrics on 
the ESX host - CPU wait and CPU ready should both be low.


On 1/11/12 10:02 AM, ivana.kv...@sedamit.hr ivana.kv...@sedamit.hr wrote:

Hi Arnold, hi list,


We're having Spectrum 9.2 on vmware and actually it's not working fine. SS is 
throwing CORBA performance errors when more load is coming from OC. I want to 
isolate where is the problem, in Spectrum or VMware.
How can I determine if problem is on virtual environment? I must say that 
customer prepared all virtual machines so we don't see how it's configuration 
looks like.


regards,
Ivana



From:   Arnold Jeffrey (ZA) arnold.jeff...@za.didata.com
To:   spectrum spectrum@listserv.unc.edu
Date:   10.02.2011 08:55
Subject:   RE: [spectrum] Spectrum 9.2 on VMWare




Hi Vincent,
We have Spectrum and Report Manager running on VM's and they are doing fine 
with DEDICATED resources from the ESX server.
The only problems we have encountered is with the people managing the virtual 
environments :  they tend to use dynamic resource allocation ( CPU and RAM ) in 
a Data centre and this does not work well :  ensure that RAM and CPU's are 
DEDICATED to each SpectroServer at all times.

Regards
Arnold Jeffrey
Software Support engineer,
Dimension Data

-Original Message-
From: Vincent Nguyen [mailto:vincent.ngu...@mesaaz.gov 
mailto:vincent.ngu...@mesaaz.gov ]
Sent: 10 February 2011 02:52 AM
To: spectrum
Subject: [spectrum] Spectrum 9.2 on VMWare

Hi everyone,

Thank you for your time on this matter. We plan to upgrade our Spectrum to 9.2 
on a VMware box and OneClick/BOXI is running another VMware. Does anyone have 
any issue on the performance or any recommendation that we need to aware of?

Thank you,

Vincent Nguyen
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arnold.jeff...@za.didata.com

This email and all contents are subject to the following disclaimer:

http://www.dimensiondata.com/emaildisclaimer 
http://www.dimensiondata.com/emaildisclaimer 

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum ivana.kv...@sedamit.hr


Napomena: Ova poruka sadrzi podatke povjerljive prirode, iskljucivo namijenjene 
osobama oznacenima kao primateljima te se pristup od strane bilo koje druge 
osobe smatra neovlastenim.  Ukoliko niste oznaceni primatelj, svaka 
distribucija, kopiranje, umnozavanje ili otkrivanje sadrzaja trecim osobama je 
strogo zabranjeno i smatra se protuzakonitim.  Ukoliko ste dobili ovu poruku, a 
niste oznaceni primatelj, molimo Vas da sto prije obavijestite posiljatelja 
poruke i unistite sve postojece kopije. Ova napomena takodjer potvrdjuje da je 
ova elektronicka poruka testirana na postojanje racunalnih virusa.

Disclaimer: The information in this email is confidential and it is intended 
solely for the addressee. Access to this email by anyone else is unauthorized. 
If you are not the intended recipient, any distribution, copying, duplication 
or disclosure is prohibited and may be unlawful.  If you have received this 
email in error, please notify the sender immediately and destroy it, and all 
copies of it. This footnote also confirms that this email message has been 
swept for the presence of computer viruses.

 *   --To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum jim.pfle...@insight.com


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE:[spectrum] Spectrum 9.2 Condition Correlation Editor

[Tadysak, Dan E]

I finally have a working example that I would like to share with the group that 
I created and tested. It takes you step by step to create an Event Correlation 
that has two hosts sending the same trap to Spectrum and what you get is 1 
alarm. CA support is trying to get their tech writers to possibly rework it or 
use it for customers that have the same need. I cannot attach it to this list 
its too big and it got rejected so I will send it to those that would like it 
and if I get too many requests maybe someone can put it up where we can pull it 
down.

Thanks,

From: Tadysak, Dan E
Sent: Wednesday, November 16, 2011 8:53 AM
To: spectrum
Subject: [spectrum] Spectrum 9.2 Condition Correlation Editor

I have gone thru the Condition Correlation guide and I am still very confused 
on how to do something I think should be very simple so I need help
or more examples.

I have 2 servers that will send the same trap. However, I want only one alarm. 
The reason is that it is a fault tolerant EMC system and if either server is 
down I need to make sure I still get the alarm but I don't want two of them. I 
have been trying to figure out how to use the CCE but the docs don't have a 
good example.

Anyone have any examples they can share or offer any suggestions?

Thanks,

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
dtady...@amfam.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum Command line Discovery

[Catalin Farcasanu]

Hi,

You would have to do that with Modeling Gateway in conjunction with a CLI
script.

From the OneClick you can export an existing Discovery Profiles as XML. This
should be your base for further discoveries. You'll have to create a similar
one from a script that should feed the specific ranges into to XML file. I
would go towards having separate discovery profiles.

Using Modeling Gateway you can then import the new discovery profile into
the system. 

It would be just one step, to trigger the discovery profile that you just
imported or to schedule it to run automatically. I recommend run it on
demand.

I don't know exactly what the action for triggering the discovery process
is, but I guess that someone else could help you with that.

This is how I would do what you asked for.

Catalin Farcasanu
SOLVIT NETWORKS

From: Michael Harris [mailto:mharris0...@gmail.com] 
Sent: Wednesday, December 14, 2011 11:02 PM
To: spectrum
Subject: [spectrum] Spectrum Command line Discovery

Does anyone know if it is possible to create discoveries via CLI?

I have a customer that has written some scripts to pull specific subnet
ranges off his routers (lots of them).  He would like to be able to use the
output to populate a discovery without having to go through the gui over and
over and over again.

Thanks,
Mike

. --To unsubscribe from spectrum, send email to lists...@unc.edu with the
body: unsubscribe spectrum catalin.farcas...@solvitnetworks.com 


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum handling traps using IP header source address not Trap PDU Agent address?

[De Munter, Erwin]

Not sure I understand your question exactly, I presume  It is not related to 
the  NAT - trapx  topic below,  but you want to know how you can verify 
handling of traps by SS  ?

I am not aware of any SS log, which is standard enabled for trap handling.  
There is however a procedure which can be used to debug alertmap / eventdisp 
behavior.  It should be documented in the event configuration manual.  I have 
used it in rare situation in the past.
I presume you know how you can verify traps, which are not certified, eg mapped 
on any event id in vendor / custom mib definitions , via Event view, or even 
put them in global collections, or export out of the DDM  ?

For debug of  connectivity incoming traps,  verify eth/agent source, OID's, 
varbinds,  etc,  I have my trapx logs,  and for direct to SS traps,  my SS 
server have a continuous SPAN to my wildpackets sniffer infrastructure in the 
DC, to getting deeper.

Not sure it answers your question,  if not explain more what you need.

Regards, Erwin


From: Robert Borowicz [mailto:rshe...@gmail.com]
Sent: vrijdag 9 december 2011 13:24
To: De Munter, Erwin
Subject: Re: [spectrum] Spectrum handling traps using IP header source address 
not Trap PDU Agent address?

Erwin,

I am going to have to start parsing through the devices that send my SS traps. 
(a variety of Network devices but also some servers and apps as well).  Is 
there a basic log file or technique you use to see what was parsed correctly 
and what was not?

Or do you simply look for the Event and how it was constructed to understand 
how well SS parsed the trap?

Thanks

-Rob Borowicz
Austin, Texas


On 12/5/2011 12:13 PM, De Munter, Erwin wrote:
Hi Dan,


1)  Of course, I just  listed the filter lines.  I have also some breaks 
on oid or type at the start of the line, to drop some traps which are useless, 
and can not be disabled at the device.

Then the others

filter * * * * * * file /path/trapsReceived2_beforeNAT.log

filter lines...

filter * * * * * * file /path/trapsReceived2.log

filter * * * * * * forward Spectrum_1

filter * * * * * * forward Spectrum_HA

filter * * * * * * forward Spectrum_test


2)
Never thought about that. But I presume trapx will always get through the whole 
list.Based on the trapx manual, the break action is not clear.  Break  - 
and to effectively
drop and suspend filter processing for them.



  I presume it will not stop parsing the list.  For performance reasons it is 
really focus on the fine tuning of your configurations,  eg which type of traps 
you enable on your devices,  to decrease the number of traps/sec.   As I said, 
I notice almost no delay in handling, or used resources when I have a trapx 
config with 1 lines, and in trapx memory.  If you have a very large amount 
of traps/se, you can increase the receive buffer in trapx (so_rcvbuf - 
manual). Never changed it myself, but we limit the traps.  ( No authentication 
traps, no link down traps from all  Edge(access) switches, disabled useless 
trap features,..).  For 4000 hosts, I have a continuous trap rate of 1 to 5 
traps per second.  I know most of them coming from  ESX phy hosts.



Regards, Erwin



From: White Dan [mailto:dan.wh...@devoteam.com]
Sent: maandag 5 december 2011 16:38
To: spectrum
Subject: RE:[spectrum] Spectrum handling traps using IP header source address 
not Trap PDU Agent address?

Hi Erwin, and Everyone,
Many thanks, Erwin, for your helpful and detailed answer (and also for kindly 
sharing your CLI mechanism for automatically generating a trapx config file 
from the Spectrum SSdb - looks great!).
I was pleased to hear your experience that your TrapExploders can cope with 
possibly 1000s of filter lines in their .cf config file.
I do have a couple of extra questions - (This thread is turning into a 
TrapExploder topic!...)


(1)I believed that a 'filter nat ' would need to be supplemented 
with another filter...action line to actually forward the trap, as the nat 
action just does the NAT'ing change and nothing else. (A comment that's in the 
default trapexploder.cf file says Note that this action only does the address 
conversion.).
So do you have a line like:
filter * * * * * * forward spectroserveraddress
near the end of your .cf to make sure the NAT'ed traps actually do get sent on 
to your Spectrum server(s)!  ?


(2)For performance reasons, is it not a good idea to prevent TrapExploder 
from needing to work its way down through the whole list of possible source 
addresses?... so maybe something like the following entries for each device?...
filter * 207\.209\.133\.62$ * * * * nat 207.209.133.62
filter * 207\.209\.133\.62$ * * * * forward spectroserveraddress
filter * 207\.209\.133\.62$ * * * * break

...Although I now realise this would actually make the file 3 times as long, 
too!.

Had no answer yet (nor from Support) re handling of SNMPv3 informrequests.  
Anyone know?

Many thanks again,
Cheers
Dan.


Dan White
Senior Consultant

RE:[spectrum] Spectrum handling traps using IP header source address not Trap PDU Agent address?

[De Munter, Erwin]

Hi Dan,


1)  Of course, I just  listed the filter lines.  I have also some breaks 
on oid or type at the start of the line, to drop some traps which are useless, 
and can not be disabled at the device.

Then the others

filter * * * * * * file /path/trapsReceived2_beforeNAT.log

filter lines...

filter * * * * * * file /path/trapsReceived2.log

filter * * * * * * forward Spectrum_1

filter * * * * * * forward Spectrum_HA

filter * * * * * * forward Spectrum_test


2)
Never thought about that. But I presume trapx will always get through the whole 
list.Based on the trapx manual, the break action is not clear.  Break  - 
and to effectively
drop and suspend filter processing for them.



  I presume it will not stop parsing the list.  For performance reasons it is 
really focus on the fine tuning of your configurations,  eg which type of traps 
you enable on your devices,  to decrease the number of traps/sec.   As I said, 
I notice almost no delay in handling, or used resources when I have a trapx 
config with 1 lines, and in trapx memory.  If you have a very large amount 
of traps/se, you can increase the receive buffer in trapx (so_rcvbuf - 
manual). Never changed it myself, but we limit the traps.  ( No authentication 
traps, no link down traps from all  Edge(access) switches, disabled useless 
trap features,..).  For 4000 hosts, I have a continuous trap rate of 1 to 5 
traps per second.  I know most of them coming from  ESX phy hosts.



Regards, Erwin



From: White Dan [mailto:dan.wh...@devoteam.com]
Sent: maandag 5 december 2011 16:38
To: spectrum
Subject: RE:[spectrum] Spectrum handling traps using IP header source address 
not Trap PDU Agent address?

Hi Erwin, and Everyone,
Many thanks, Erwin, for your helpful and detailed answer (and also for kindly 
sharing your CLI mechanism for automatically generating a trapx config file 
from the Spectrum SSdb - looks great!).
I was pleased to hear your experience that your TrapExploders can cope with 
possibly 1000s of filter lines in their .cf config file.
I do have a couple of extra questions - (This thread is turning into a 
TrapExploder topic!...)


(1)I believed that a 'filter nat ' would need to be supplemented 
with another filter...action line to actually forward the trap, as the nat 
action just does the NAT'ing change and nothing else. (A comment that's in the 
default trapexploder.cf file says Note that this action only does the address 
conversion.).
So do you have a line like:
filter * * * * * * forward spectroserveraddress
near the end of your .cf to make sure the NAT'ed traps actually do get sent on 
to your Spectrum server(s)!  ?


(2)For performance reasons, is it not a good idea to prevent TrapExploder 
from needing to work its way down through the whole list of possible source 
addresses?... so maybe something like the following entries for each device?...
filter * 207\.209\.133\.62$ * * * * nat 207.209.133.62
filter * 207\.209\.133\.62$ * * * * forward spectroserveraddress
filter * 207\.209\.133\.62$ * * * * break

...Although I now realise this would actually make the file 3 times as long, 
too!.

Had no answer yet (nor from Support) re handling of SNMPv3 informrequests.  
Anyone know?

Many thanks again,
Cheers
Dan.


Dan White
Senior Consultant
Service Assurance
[Devoteam]

Tel. : +44 (0)20 7288 2822
dan.wh...@devoteam.commailto:dan.wh...@devoteam.com

[http://www.devoteam.com/images/environment.gif]Please consider the environment 
- do you really need to print this email ?

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
erwin.de_mun...@atos.netmailto:erwin.de_mun...@atos.net

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.cominline: image001.pnginline: image002.gif

RE:[spectrum] Spectrum handling traps using IP header source address not Trap PDU Agent address?

[De Munter, Erwin]

Hi Dan,

Presuming the answer on your question is no,  I ‘ll hope to have an answer on 
that from others.  In the past it was NO, so we have a situation like you.
Lot of elements behind NAT, but small locations to install SS or SDM locally.
We use indeed trapexploder with a simple filter for every element in Spectrum.  
The filter is simple,  translate the agent source in the trap pdu to the 
Ethernet source.  Filter entries look like this.  So twice the address you have 
in Spectrum.  You do not need the original address.

filter * 207\.209\.133\.62$ * * * * nat 207.209.133.62

You do not have to manage them individual,  just write a script, like below 
which extract all primary addresses via CLI spectrum script, and creates, push 
to trapexploder server, and restart.We use two  exploders for redundancy 
with the same config.  I already have ran instance with more then 1 lines, 
Works like a sharm.  Currently 4781 lines.  We even add elements which are not 
natted and send traps directly to Spectrum, it does not matter, because the PDU 
has already the Ethernet source address.  We run the script every night, or 
manually when needed.

cat /etc/trapexploder.cf | wc
4781   42951  257618

I also have a log entry before and after the trapexploder translation,  for 
debug of incoming traps.

filter * * * * * * file /var/log/ehealth/trapsReceived2_beforeNAT.log
…
…
filter * * * * * * file /var/log/ehealth/trapsReceived2.log



Script

-sh-3.2$ cat export.sh
#! /bin/sh

#--
# Script to export Spectrum devices directly into trapexploder format
#--
#Standard connect procedure for CLI

if [ -z $CLIPATH ]
then
CLIPATH=/spectrum/vnmsh
export CLIPATH
fi

CLISESSID=$$
export CLISESSID

$CLIPATH/connect

#Bind dir to variable mydir

if [ -z $MYDIR ]
then
MYDIR=/data/orsns/specuser/SISTOOLS/TRAPEXPLODER/
export MYDIR
fi

#Wait 3 seconds, otherwise it goes too fast

sleep 3

if [ $? -ne 0 ]
then
echo Error: could not connect. Exiting
exit 0
fi

#Query the ModelHandler for each device

$CLIPATH/show devices | egrep -v MHandle | cut -c0-9  $MYDIR/devices.list

#Create array of these ModelHandlers

devices=( `cat $MYDIR/devices.list | tr '\n' ' '`)

#Query attributes using the ModelHandler for each device

for (( i = 0 ; i=${#devices[@]} ;  i++ ))

do
  #Query IP ADDRESS
  $CLIPATH/show attributes -e attr=0x12d7f mh=${devices[$i]} | egrep -v Value | 
cut -c68-100  $MYDIR/temporary.list
done

#Create array of IP-addresses

netaddr=( `cat $MYDIR/temporary.list | tr '\n' ' '`)

#Change syntax of file

for (( i = 0 ; i=${#netaddr[@]} ;  i++ ))
do
  case ${netaddr[$i]} in
  10.63.194.2 | 10.63.194.104 | 10.63.194.117 | 10.63.194.118)
  echo ${netaddr[$i]}  $MYDIR/tmp_trapex.ignored
  ;;
  *)
  echo filter * \${netaddr[$i]}\$\ * * * * nat ${netaddr[$i]}  
$MYDIR/tmp_trapex.temp
  ;;
  esac
done

#Perform changes to syntax
sed -e 's/\./\\/' -e 's/\./\\/' -e 's/\./\\/' $MYDIR/tmp_trapex.temp  
$MYDIR/tmp2_trapex.temp

#Perform changes to syntax
sed -e 's/\\/\\./g' $MYDIR/tmp2_trapex.temp  $MYDIR/tmp3_trapex.temp

#Transform to trapexploder.cf file
sed '$d' $MYDIR/tmp3_trapex.temp | sort  $MYDIR/trapexploder.cf

#Add final lines to trapexploder.cf file
echo   $MYDIR/trapexploder.cf  #INSERT BLANK LINE

#Remove all temporary files
rm -f $MYDIR/tmp_trapex.temp
rm -f $MYDIR/tmp2_trapex.temp
rm -f $MYDIR/tmp3_trapex.temp
rm -f $MYDIR/temporary.list
rm -f $MYDIR/devices.list
rm -f $MYDIR/tmp_trapex.ignored

#Disconnect from CLI
$CLIPATH/disconnect

exit 1
-sh-3.2$


Then push it to the correct place, and restart trapexploder

Regards, Erwin


Met vriendelijke groeten, | Best regards, | Bien à vous,

De Munter Erwin  - Дэ Мюнтер Эрвин
Business technologist  Network  Operations Mngnt
*  +32 253-67474
*  +32 473-974699
[antenna] on4cgd - jo21if
* erwin.de_mun...@atos.netmailto:erwin.de_mun...@atos.net
Atealaan 34
B-2200 Herentals
http://www.atos.nethttp://www.atos.net/



From: White Dan [mailto:dan.wh...@devoteam.com]
Sent: zaterdag 3 december 2011 15:32
To: spectrum
Subject: [spectrum] Spectrum handling traps using IP header source address not 
Trap PDU Agent address?

For incoming traps, can Spectrum (be configured to) use the source IP address 
in the IP header, rather than the Agent Address inside the Trap's PDU, for 
determining the source device for posting the event to the device’s model?

Context: large Spectrum about to be deployed in environment with all devices 
beyond a static NAT layer which translates IP header source and dest IPs (but 
not the Agent address inside trap PDU of course). There are overlapping IPs 
between all the 100 or so customer networks beyond the NAT. We shall be 
modelling all 

RE: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for customer download

[Dan . Ellsweig]

Rene

We are running 9.2.1.005 under Linux - is this HF the same as 9.2.1 - does
this HF apply to us?


Dan Ellsweig

Enterprise Management Systems
Avon Products
1 Avon Plaza
Rye, NY 10830

914-935-2723



   
 Cantwell, Rene   
 D
 Rene.Cantwell@ca  To 
 .com spectrum  
   spectrum@listserv.unc.edu 
 12/01/2011 06:20   cc 
 PM
   Subject 
   RE: [spectrum] Spectrum 9.2 hotfix  
 Please respond to patch H06 is now available for  
  Cantwell, Rene  customer download   
D 
 Rene.Cantwell@ca 
   .com   
   
   
   




Ah I see what happened, we fixed the typo in the link for the patch
download but not for the Release Note.  I’ll get it fixed.

Sorry about that.

--
Rene’


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
(Embedded image moved to file: pic17063.jpg)Description: Picture

From: Bohra, Saurabh [mailto:saurabh.bo...@espn.com]
Sent: Thursday, December 01, 2011 6:14 PM
To: Cantwell, Rene D; spectrum (spectrum@listserv.unc.edu)
Subject: RE: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for
customer download

Rene,

Its not available for any OS using support site. The issue is the URL link
the support site creates has Spectrum_09.02.00 instead of 09.02.01

The direct ftp link works:
ftp://ftp.ca.com/pub/CA-SPECTRUM/Updates/Non-GA/Spectrum_09.02.01.H06/ReleaseNote.H06.htm






Saurabh Bohra
X60842

From: Cantwell, Rene D [mailto:rene.cantw...@ca.com]
Sent: Thursday, December 01, 2011 6:02 PM
To: Bohra, Saurabh; spectrum
Subject: RE: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for
customer download


I’ve attached a copy of the release note.

What OS were you trying to download it from?

--
Rene’


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
(Embedded image moved to file: pic10681.jpg)Description: Picture

From: Bohra, Saurabh [mailto:saurabh.bo...@espn.com]
Sent: Thursday, December 01, 2011 5:15 PM
To: spectrum
Subject: RE: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for
customer download

I cannot download the README of H06 for any OS, can anyone else download
that?

Saurabh Bohra
X60842

From: Cantwell, Rene D [mailto:rene.cantw...@ca.com]
Sent: Wednesday, November 30, 2011 6:39 PM
To: spectrum
Subject: RE: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for
customer download

Yes, 9.2.1 is included in H06.  As long as you have the 9.2.0 base product
you can go directly to H06.

Regards,
Rene’


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
(Embedded image moved to file: pic25903.jpg)Description: Picture

From: Naiman, Eugen [mailto:eugen.nai...@dhhs.tas.gov.au]
Sent: Wednesday, November 30, 2011 6:37 PM
To: spectrum
Subject: RE: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for
customer download

Great news Rene, thank you very much for letting us know.

Question: is 9.2.1 included in H06? Do I need to download 9.2.1 and install
it before installing H06?

Thanks,

Regards,

Eugen NAIMAN
IT Officer
ICT Infrastructure
Department Health and Human Services
 5/99 Bathurst Street, Hobart, 7000
 (:  (03) 6233 8565
  Ê:  (03) 6233 6297
eugen.nai...@dhhs.tas.gov.au


From: Cantwell, Rene D [mailto:rene.cantw...@ca.com]
Sent: Thursday, 1 December 2011 9:39 AM
To: spectrum
Subject: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for
customer download

Spectrum 9.2 hotfix patch H06 is now available for customer download.

A news item announcement with highlights of what is included in H06 can be
found on our product home page at
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832
.

Customers can download from two sources;
From

RE: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for customer download

[Cantwell, Rene D]

H06 is an accumulative patch that includes what you already have in H05 (aka 
9.2.1), in addition it delivers new functionality, new certifications and fixes.

Anyone wishing to take advantage of these should install H06.  The news item 
and readme got into more details as to what is included.

--
Rene'



René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com



-Original Message-
From: dan.ellsw...@avon.com [mailto:dan.ellsw...@avon.com] 
Sent: Friday, December 02, 2011 8:12 AM
To: spectrum
Cc: spectrum
Subject: RE: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for 
customer download



Rene

We are running 9.2.1.005 under Linux - is this HF the same as 9.2.1 - does this 
HF apply to us?


Dan Ellsweig

Enterprise Management Systems
Avon Products
1 Avon Plaza
Rye, NY 10830

914-935-2723



   
 Cantwell, Rene   
 D
 Rene.Cantwell@ca  To 
 .com spectrum  
   spectrum@listserv.unc.edu 
 12/01/2011 06:20   cc 
 PM
   Subject 
   RE: [spectrum] Spectrum 9.2 hotfix  
 Please respond to patch H06 is now available for  
  Cantwell, Rene  customer download   
D 
 Rene.Cantwell@ca 
   .com   
   
   
   




Ah I see what happened, we fixed the typo in the link for the patch download 
but not for the Release Note.  I’ll get it fixed.

Sorry about that.

--
Rene’


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
(Embedded image moved to file: pic17063.jpg)Description: Picture

From: Bohra, Saurabh [mailto:saurabh.bo...@espn.com]
Sent: Thursday, December 01, 2011 6:14 PM
To: Cantwell, Rene D; spectrum (spectrum@listserv.unc.edu)
Subject: RE: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for 
customer download

Rene,

Its not available for any OS using support site. The issue is the URL link the 
support site creates has Spectrum_09.02.00 instead of 09.02.01

The direct ftp link works:
ftp://ftp.ca.com/pub/CA-SPECTRUM/Updates/Non-GA/Spectrum_09.02.01.H06/ReleaseNote.H06.htm






Saurabh Bohra
X60842

From: Cantwell, Rene D [mailto:rene.cantw...@ca.com]
Sent: Thursday, December 01, 2011 6:02 PM
To: Bohra, Saurabh; spectrum
Subject: RE: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for 
customer download


I’ve attached a copy of the release note.

What OS were you trying to download it from?

--
Rene’


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
(Embedded image moved to file: pic10681.jpg)Description: Picture

From: Bohra, Saurabh [mailto:saurabh.bo...@espn.com]
Sent: Thursday, December 01, 2011 5:15 PM
To: spectrum
Subject: RE: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for 
customer download

I cannot download the README of H06 for any OS, can anyone else download that?

Saurabh Bohra
X60842

From: Cantwell, Rene D [mailto:rene.cantw...@ca.com]
Sent: Wednesday, November 30, 2011 6:39 PM
To: spectrum
Subject: RE: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for 
customer download

Yes, 9.2.1 is included in H06.  As long as you have the 9.2.0 base product you 
can go directly to H06.

Regards,
Rene’


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
(Embedded image moved to file: pic25903.jpg)Description: Picture

From: Naiman, Eugen [mailto:eugen.nai...@dhhs.tas.gov.au]
Sent: Wednesday, November 30, 2011 6:37 PM
To: spectrum
Subject: RE: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for 
customer download

Great news Rene, thank you very much for letting us know.

Question: is 9.2.1 included in H06? Do I need to download 9.2.1 and install it 
before installing H06?

Thanks,

Regards,

Eugen NAIMAN
IT Officer
ICT

RE: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for customer download

[Bohra, Saurabh]

I cannot download the README of H06 for any OS, can anyone else download that?

Saurabh Bohra
X60842

From: Cantwell, Rene D [mailto:rene.cantw...@ca.com]
Sent: Wednesday, November 30, 2011 6:39 PM
To: spectrum
Subject: RE: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for 
customer download

Yes, 9.2.1 is included in H06.  As long as you have the 9.2.0 base product you 
can go directly to H06.

Regards,
Rene'


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
mailto:rene.cantw...@ca.com[cid:image001.jpg@01CCB04C.BB972670]javascript:ClickThumbnail(76)

From: Naiman, Eugen [mailto:eugen.nai...@dhhs.tas.gov.au]
Sent: Wednesday, November 30, 2011 6:37 PM
To: spectrum
Subject: RE: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for 
customer download

Great news Rene, thank you very much for letting us know.

Question: is 9.2.1 included in H06? Do I need to download 9.2.1 and install it 
before installing H06?

Thanks,

Regards,

Eugen NAIMAN
IT Officer
ICT Infrastructure
Department Health and Human Services
 5/99 Bathurst Street, Hobart, 7000
 *:  (03) 6233 8565
  Ê:  (03) 6233 6297
eugen.nai...@dhhs.tas.gov.aumailto:eugen.nai...@dhhs.tas.gov.au


From: Cantwell, Rene D [mailto:rene.cantw...@ca.com]
Sent: Thursday, 1 December 2011 9:39 AM
To: spectrum
Subject: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for customer 
download


Spectrum 9.2 hotfix patch H06 is now available for customer download.



A news item announcement with highlights of what is included in H06 can be 
found on our product home page at 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832 .



Customers can download from two sources;

From support.ca.com - 
https://support.ca.com/irj/portal/anonymous/phpdocs?filePath=0/7832/7832_92_patchindex.html

From ftp.ca.comftp://ftp.ca.com  - 
/pub/CA-SPECTRUM/Updates/Non-GA/Spectrum_09.02.01.H06









Please Note:

Due to complexity reasons it is nearly impossible to develop an uninstall 
process for hotfix patches, service packs or full releases.

For this reason we have previously documented a best practice knowledge 
document;



Title:  What is the best practice to make a complete back up copy of 
SPECTRUM?

 
https://support.ca.com/irj/portal/kbtech?docid=512407searchID=TEC512407fromKBResultsScreenT



Without a complete save of your environment before installing a hotfix, service 
pack or full release upgrade, the only method to get back to the previous H06 
install setup is through reinstalls.




If you should have any specific concerns or questions regarding hotfix H06, 
please send them directly to me.

Regards,
Rene'


René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
mailto:rene.cantw...@ca.com[cid:image001.jpg@01CCB04C.BB972670]javascript:ClickThumbnail(76)


 *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
eugen.nai...@dhhs.tas.gov.aumailto:eugen.nai...@dhhs.tas.gov.au
Want to Get Healthy?
The Tasmanian Government's Get Healthy Information and Coaching Service(R) 
provides free information and coaching support to Tasmanian adults who would 
like to learn healthier eating habits, be more active or achieve and maintain a 
healthy weight. Call 1300 806 258 between 8am and 8pm, Monday to Friday or 
visit www.gethealthy.tas.gov.auhttp://www.gethealthy.tas.gov.au for more 
information.
CONFIDENTIALITY NOTICE AND DISCLAIMER
The information in this transmission may be confidential and/or protected by 
legal professional privilege, and is intended only for the person or persons to 
whom it is addressed. If you are not such a person, you are warned that any 
disclosure, copying or dissemination of the information is unauthorised. If you 
have received the transmission in error, please immediately contact this office 
by telephone, fax or email, to inform us of the error and to enable 
arrangements to be made for the destruction of the transmission, or its return 
at our cost. No liability is accepted for any unauthorised use of the 
information contained in this transmission.
If the transmission contains advice, the advice is based on instructions in 
relation to, and is provided to the addressee in connection with, the matter 
mentioned above. Responsibility is not accepted for reliance upon it by any 
other person or for any other purpose.

 *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
cantw...@aprisma.commailto:cantw...@aprisma.com

 *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
saurabh.bo...@espn.com

RE: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for customer download

[Naiman, Eugen]

Great news Rene, thank you very much for letting us know.

 

Question: is 9.2.1 included in H06? Do I need to download 9.2.1 and install it 
before installing H06?

 

Thanks,

 

Regards,

 

Eugen NAIMAN
IT Officer
ICT Infrastructure
Department Health and Human Services 
 5/99 Bathurst Street, Hobart, 7000 
 (:  (03) 6233 8565 
  Ê:  (03) 6233 6297 
eugen.nai...@dhhs.tas.gov.au


 

From: Cantwell, Rene D [mailto:rene.cantw...@ca.com] 
Sent: Thursday, 1 December 2011 9:39 AM
To: spectrum
Subject: [spectrum] Spectrum 9.2 hotfix patch H06 is now available for customer 
download

 

Spectrum 9.2 hotfix patch H06 is now available for customer download.

 

A news item announcement with highlights of what is included in H06 can be 
found on our product home page at 
https://support.ca.com/irj/portal/prddtlshome?prdhmpgform=pproductID=7832 .

 

Customers can download from two sources;

From support.ca.com - 
https://support.ca.com/irj/portal/anonymous/phpdocs?filePath=0/7832/7832_92_patchindex.html
 

From ftp.ca.com  - /pub/CA-SPECTRUM/Updates/Non-GA/Spectrum_09.02.01.H06

 

 

 

 

Please Note:

Due to complexity reasons it is nearly impossible to develop an uninstall 
process for hotfix patches, service packs or full releases.

For this reason we have previously documented a best practice knowledge 
document;

 

Title:  What is the best practice to make a complete back up copy of 
SPECTRUM?

 
https://support.ca.com/irj/portal/kbtech?docid=512407searchID=TEC512407fromKBResultsScreenT
 

 

Without a complete save of your environment before installing a hotfix, service 
pack or full release upgrade, the only method to get back to the previous H06 
install setup is through reinstalls.

 

 

If you should have any specific concerns or questions regarding hotfix H06, 
please send them directly to me.

 

Regards,

Rene'

 

 

René Cantwell
CA Technologies
Support Delivery Manager
Tel:  +1-603-334-2497 or +1 877-428-6324
Fax: +1-603-334-2540
rene.cantw...@ca.com
mailto:rene.cantw...@ca.com   javascript:ClickThumbnail(76) 

 

*   --To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum eugen.nai...@dhhs.tas.gov.au 




Want to Get Healthy?

The Tasmania Government's Get Healthy Information and Coaching Service(R) 
provides free information and coaching support to Tasmanian adults who would 
like to learn healthier eating habits, be more active or achieve and maintain a 
healthy weight. Call 1300 806 258 between 8am and 8pm, Monday to Friday or 
visit www.gethealthy.tas.gov.au for more information.

CONFIDENTIALITY NOTICE AND DISCLAIMER

The information in this transmission may be confidential and/or protected by 
legal professional privilege, and is intended only for the person or persons to 
whom it is addressed. If you are not such a person, you are warned that any 
disclosure, copying or dissemination of the information is unauthorised. If you 
have received the transmission in error, please immediately contact this office 
by telephone, fax or email, to inform us of the error and to enable 
arrangements to be made for the destruction of the transmission, or its return 
at our cost. No liability is accepted for any unauthorised use of the 
information contained in this transmission. If the transmission contains 
advice, the advice is based on instructions in relation to, and is provided to 
the addressee in connection with, the matter mentioned above. Responsibility is 
not accepted for reliance upon it by any other person or for any other purpose.

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.comimage001.jpg

Antwort: RE: [spectrum] Spectrum 9.2 Condition Correlation Editor

[Christian Fieres]

Calvin, list,

frankly I don't see how to do this with Event Rules. AFAIK, you can set 
event rate rules on events on the same model, but not across models 
(that's why we call Condition Correlation cross model correlation, I 
guess). I have a similar problem, but it goes a bit further, since I want 
to suppress alarms until there are in fact two alarms - and these alarms 
should be compacted into one...

Using SPM, I have two Cisco routers testing the same host for some TCP 
port responsiveness (or for that matter anything else those two routers do 
tests against). Those routers are in two completely differing corners of 
my network, and so it happens that one router runs into timeout while the 
other doesn't. That means there is one alarm which is in fact bogus, 
because the feature the router is testing is in fact up and running. One 
might correlate this in mind - One alarm is okay, two alarms are bad -, 
but it would be very helpful to use automation to let an alarm rise if and 
only if there are parallel alarms for the same test from both test 
routers.

One way could be to create a Correlation Domain for each test (which could 
mean driving some hundred domains!) and use the event count feature to 
suppress the SPM test's alarms and assert an alarm on the domain itself. 
This, in fact, only solves my two alarms for one problem question but 
does not suppress the alarm if there is only one, which is my main 
problem.

Freundliche Grüße / Best regards

Christian Fieres

Mainova AG
Planung und Betrieb Infrastruktur (M3-ON2)
Service Operation Center
Solmsstraße 38
60623 Frankfurt

Telefon / Phone (069) 2 13-2 36 17
Mobil / Mobile (0170) 5 60 15 63
Telefax / Facsimile (069) 2 13-9 62 36 17
E-Mail c.fie...@mainova.de




Von:Calvin Lane calvin.l...@gmail.com
An: spectrum spectrum@listserv.unc.edu
Datum:  16.11.2011 16:54
Betreff:RE: [spectrum] Spectrum 9.2 Condition Correlation Editor



Hello Dan,
 
I would probably lean towards Event Rules and not Condition Correlation 
Editor.  Depending on the how the events from those two servers would come 
in, you could create an ?event series?, ?event counter?, or ?event rate? 
rule.  This would be done in the Event Configuration Editor.  Let me know 
if you have any questions. 
 
Calvin
 
From: Tadysak, Dan E [mailto:dtady...@amfam.com] 
Sent: Wednesday, November 16, 2011 9:53 AM
To: spectrum
Subject: [spectrum] Spectrum 9.2 Condition Correlation Editor
 
I have gone thru the Condition Correlation guide and I am still very 
confused on how to do something I think should be very simple so I need 
help 
or more examples.
 
I have 2 servers that will send the same trap. However, I want only one 
alarm. The reason is that it is a fault tolerant EMC system and if either 
server is down I need to make sure I still get the alarm but I don?t want 
two of them. I have been trying to figure out how to use the CCE but the 
docs don?t have a good example. 
 
Anyone have any examples they can share or offer any suggestions?
 
Thanks,
--To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum calvin.l...@gmail.com 
--To unsubscribe from spectrum, send email to lists...@unc.edu with the 
body: unsubscribe spectrum c.fie...@mainova.de 


Mainova Aktiengesellschaft ? Solmsstraße 38 ? D-60623 Frankfurt am Main
Vorsitzende des Aufsichtsrates: Oberbürgermeisterin Dr. h. c. Petra Roth 
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Dr. Peter Birkner, 
Lothar Herbst, Dr. Marie-Luise Wolff
Sitz der Aktiengesellschaft: Frankfurt am Main ? Amtsgericht Frankfurt HRB 
7173 ? USt-ID-Nr. DE 114184034 


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum 9.2 Condition Correlation Editor

[Stephen Warne]

You could also use spectrum service manager to achieve this for your TCP port 
responsiveness example. That would have the added advantage of letting you 
choose whether 1 test good, 2 tests bad = service up or service degraded.

From: Christian Fieres 
[mailto:c.fie...@mainova.de]mailto:[mailto:c.fie...@mainova.de]
Sent: 17 November 2011 07:21
To: spectrum
Subject: Antwort: RE: [spectrum] Spectrum 9.2 Condition Correlation Editor

Calvin, list,

frankly I don't see how to do this with Event Rules. AFAIK, you can set event 
rate rules on events on the same model, but not across models (that's why we 
call Condition Correlation cross model correlation, I guess). I have a 
similar problem, but it goes a bit further, since I want to suppress alarms 
until there are in fact two alarms - and these alarms should be compacted into 
one...

Using SPM, I have two Cisco routers testing the same host for some TCP port 
responsiveness (or for that matter anything else those two routers do tests 
against). Those routers are in two completely differing corners of my network, 
and so it happens that one router runs into timeout while the other doesn't. 
That means there is one alarm which is in fact bogus, because the feature the 
router is testing is in fact up and running. One might correlate this in mind - 
One alarm is okay, two alarms are bad -, but it would be very helpful to use 
automation to let an alarm rise if and only if there are parallel alarms for 
the same test from both test routers.

One way could be to create a Correlation Domain for each test (which could mean 
driving some hundred domains!) and use the event count feature to suppress the 
SPM test's alarms and assert an alarm on the domain itself. This, in fact, only 
solves my two alarms for one problem question but does not suppress the alarm 
if there is only one, which is my main problem.

Freundliche Grüße / Best regards

Christian Fieres

Mainova AG
Planung und Betrieb Infrastruktur (M3-ON2)
Service Operation Center
Solmsstraße 38
60623 Frankfurt

Telefon / Phone (069) 2 13-2 36 17
Mobil / Mobile (0170) 5 60 15 63
Telefax / Facsimile (069) 2 13-9 62 36 17
E-Mail c.fie...@mainova.demailto:c.fie...@mainova.de




Von:Calvin Lane calvin.l...@gmail.commailto:calvin.l...@gmail.com
An:spectrum 
spectrum@listserv.unc.edumailto:spectrum@listserv.unc.edu
Datum:16.11.2011 16:54
Betreff:RE: [spectrum] Spectrum 9.2 Condition Correlation Editor




Hello Dan,

I would probably lean towards Event Rules and not Condition Correlation Editor. 
 Depending on the how the events from those two servers would come in, you 
could create an 'event series', 'event counter', or 'event rate' rule.  This 
would be done in the Event Configuration Editor.  Let me know if you have any 
questions.

Calvin

From: Tadysak, Dan E [mailto:dtady...@amfam.com]
Sent: Wednesday, November 16, 2011 9:53 AM
To: spectrum
Subject: [spectrum] Spectrum 9.2 Condition Correlation Editor

I have gone thru the Condition Correlation guide and I am still very confused 
on how to do something I think should be very simple so I need help
or more examples.

I have 2 servers that will send the same trap. However, I want only one alarm. 
The reason is that it is a fault tolerant EMC system and if either server is 
down I need to make sure I still get the alarm but I don't want two of them. I 
have been trying to figure out how to use the CCE but the docs don't have a 
good example.

Anyone have any examples they can share or offer any suggestions?

Thanks,

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
calvin.l...@gmail.commailto:calvin.l...@gmail.com
  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
c.fie...@mainova.demailto:c.fie...@mainova.de


Mainova Aktiengesellschaft * Solmsstraße 38 * D-60623 Frankfurt am Main
Vorsitzende des Aufsichtsrates: Oberbürgermeisterin Dr. h. c. Petra Roth
Vorstand: Dr. Constantin H. Alsheimer (Vorsitzender), Dr. Peter Birkner, Lothar 
Herbst, Dr. Marie-Luise Wolff
Sitz der Aktiengesellschaft: Frankfurt am Main * Amtsgericht Frankfurt HRB 7173 
* USt-ID-Nr. DE 114184034


Mainova steht für besten Service, faire Verträge und top Preise für Ihre 
Energie - mit Auszeichnung!
Mehr Infos unter: http://www.mainova.de/auszeichnung

  *   --To unsubscribe from spectrum, send email to 
lists...@unc.edumailto:lists...@unc.edu with the body: unsubscribe spectrum 
stephenwa...@networksfirst.commailto:stephenwa...@networksfirst.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum 9.2 Condition Correlation Editor

[Calvin Lane]

Hello Dan,

 

I would probably lean towards Event Rules and not Condition Correlation
Editor.  Depending on the how the events from those two servers would come
in, you could create an 'event series', 'event counter', or 'event rate'
rule.  This would be done in the Event Configuration Editor.  Let me know if
you have any questions.  

 

Calvin

 

From: Tadysak, Dan E [mailto:dtady...@amfam.com] 
Sent: Wednesday, November 16, 2011 9:53 AM
To: spectrum
Subject: [spectrum] Spectrum 9.2 Condition Correlation Editor

 

I have gone thru the Condition Correlation guide and I am still very
confused on how to do something I think should be very simple so I need help

or more examples.

 

I have 2 servers that will send the same trap. However, I want only one
alarm. The reason is that it is a fault tolerant EMC system and if either
server is down I need to make sure I still get the alarm but I don't want
two of them. I have been trying to figure out how to use the CCE but the
docs don't have a good example. 

 

Anyone have any examples they can share or offer any suggestions?

 

Thanks,

*   --To unsubscribe from spectrum, send email to lists...@unc.edu with
the body: unsubscribe spectrum calvin.l...@gmail.com 


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum 9.2 Condition Correlation Editor

[roger]

I have the  a similar case to solve and would be glad with some examples.
Tks.

Enviado via iPad

Em 16/11/2011, às 06:52, Tadysak, Dan E dtady...@amfam.com escreveu:

 I have gone thru the Condition Correlation guide and I am still very confused 
 on how to do something I think should be very simple so I need help 
 or more examples.
  
 I have 2 servers that will send the same trap. However, I want only one 
 alarm. The reason is that it is a fault tolerant EMC system and if either 
 server is down I need to make sure I still get the alarm but I don’t want two 
 of them. I have been trying to figure out how to use the CCE but the docs 
 don’t have a good example.
  
 Anyone have any examples they can share or offer any suggestions?
  
 Thanks,
 --To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
 unsubscribe spectrum ro...@petrobras.com.br

 
O emitente desta mensagem é responsável por seu conteúdo e endereçamento. Cabe 
ao destinatário cuidar quanto ao tratamento adequado. Sem a devida autorização, 
a divulgação, a reprodução, a distribuição ou qualquer outra ação em 
desconformidade com as normas internas do Sistema Petrobras são proibidas e 
passíveis de sanção disciplinar, cível e criminal.
 
The sender of this message is responsible for its content and addressing. The 
receiver shall take proper care of it. Without due authorization, the 
publication, reproduction, distribution or the performance of  any other action 
not conforming to Petrobras System internal policies and procedures is 
forbidden and liable to disciplinary, civil or criminal sanctions.
 
El emisor de este mensaje es responsable por su contenido y direccionamiento. 
Cabe al destinatario darle el tratamiento adecuado. Sin la debida autorización, 
su divulgación, reproducción, distribución o cualquier otra acción no conforme 
a las normas internas del Sistema Petrobras están prohibidas y serán pasibles 
de sanción disciplinaria, civil y penal.

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum Report Manager issue

[Pfleger, Jim]

We worked issues like this (inconsistent or missing SRM data) for more than a 
year as ticket 19572807-1. I'm happy to say that we received several fixes for 
different aspects of the problem, the last of which was delivered in H04. I 
don't know how many of those fixes were backported to 9.1, but you should ask 
support about our ticket number.

HTH,
Jim



On 11/10/11 1:25 PM, Craig Cook craig.c...@carquest.com wrote:

We see this exact issue.  Spectrum 9.1.H14

We have an open case with support.

No resolution yet.

Craig

-Original Message-
From: kavi arasu [mailto:kaviaras...@gmail.com]
Sent: Thursday, November 10, 2011 12:48 PM
To: spectrum
Subject: [spectrum] Spectrum Report Manager issue

Hi,

The models down trap had reached spectrum and the alarm was raised in spectrum, 
and also the up trap had reached spectrum and the alarm was cleared in spectrum.

In spectrum boxi report, the outage start time is exactly captured when the 
down trap came (alarm raised time), whereas the outage end time is not showing 
properly, it is still showing that the outage is ongoing.

It happens in some few occasions.

There is some issue is with reporting tool.

I had attached screenshot for your referrence.

Had any one faced this kind of issue. If so please give your suggesstion.

Regards,
Kavi


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum craig.c...@carquest.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum jim.pfle...@insight.com


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum Report Manager issue

[Craig Cook]

We see this exact issue.  Spectrum 9.1.H14

We have an open case with support.

No resolution yet.

Craig

-Original Message-
From: kavi arasu [mailto:kaviaras...@gmail.com] 
Sent: Thursday, November 10, 2011 12:48 PM
To: spectrum
Subject: [spectrum] Spectrum Report Manager issue

Hi,

The models down trap had reached spectrum and the alarm was raised in spectrum, 
and also the up trap had reached spectrum and the alarm was cleared in spectrum.

In spectrum boxi report, the outage start time is exactly captured when the 
down trap came (alarm raised time), whereas the outage end time is not showing 
properly, it is still showing that the outage is ongoing.

It happens in some few occasions.

There is some issue is with reporting tool.

I had attached screenshot for your referrence.

Had any one faced this kind of issue. If so please give your suggesstion.

Regards,
Kavi


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum craig.c...@carquest.com

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum Report Manager issue

[kavi arasu]

Hi Craig,

Since how long you are waiting for the support.

Regards,
Kavi

On Fri, Nov 11, 2011 at 1:55 AM, Craig Cook craig.c...@carquest.com wrote:

 We see this exact issue.  Spectrum 9.1.H14

 We have an open case with support.

 No resolution yet.

 Craig

 -Original Message-
 From: kavi arasu [mailto:kaviaras...@gmail.com]
 Sent: Thursday, November 10, 2011 12:48 PM
 To: spectrum
 Subject: [spectrum] Spectrum Report Manager issue

 Hi,

 The models down trap had reached spectrum and the alarm was raised in
 spectrum, and also the up trap had reached spectrum and the alarm was
 cleared in spectrum.

 In spectrum boxi report, the outage start time is exactly captured when
 the down trap came (alarm raised time), whereas the outage end time is not
 showing properly, it is still showing that the outage is ongoing.

 It happens in some few occasions.

 There is some issue is with reporting tool.

 I had attached screenshot for your referrence.

 Had any one faced this kind of issue. If so please give your suggesstion.

 Regards,
 Kavi


 ---
 To unsubscribe from spectrum, send email to lists...@unc.edu with the
 body: unsubscribe spectrum craig.c...@carquest.com


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum 9.2.1 watch problem

[Mathias Wegner]

On Nov 2, 2011, at 7:45 AM, omar.izetbego...@sedamit.hr 
omar.izetbego...@sedamit.hr wrote:

 Hi everyone,
 
 my customer has got Spectrum 9.2.1 installed on 3 Windows 2003 servers 
 (SpectroServer, OneClick and BOXI). We have made a new Spectrum installation 
 and during the process we used databases
 (DDM and SSDb) from older version 8.1. Everything was ok. Now we have 
 problems with creating watches.
 
 There are old watches that are createdinherited from the version 8.1 and 
 they are ok when I activate them. If I copy them or create new watches and 
 try to activate them I keep getting the message 'There is a syntax error in 
 the watch expression'. No matter which watch I try to create this message 
 pops out. I've tried to create watches on devices, interfaces, tried to use 
 inherited attributes, created attributes, with no success.
 
 I've searched the knowledge base and forum but there's nothing helpful. Do 
 you maybe have an idea what's the reason for this happening? 


I have had similar problems with copying and editing watches in 9.2.1 on Linux, 
and I have found a few things that help.  When copying, I have had more success 
copying the text of the watch from the information view of the watch I intend 
to copy rather than using the copy button.  When editing, I have found that 
making sure there are spaces between parenthesis and anything else - like REAL 
( ATTRIBUTE ) rather than REAL(ATTRIBUTE).  



Mathias Wegner
Sr Network Engineer
University of Pennsylvania
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum Data Storage

[HUNGERFORD, CLIFF (AG/1000)]

There's a setting for each (used to be in a file called .configrc in the DDM 
directory) 

MAX_STAT_DAYS=45 (default)
MAX_EVENT_DAYS=45 (default)

Just increase the number of days you want the maximum to be, assuming you have 
the memory and disk space to handle it.


-Original Message-
From: kavi arasu [mailto:kaviaras...@gmail.com] 
Sent: Tuesday, October 11, 2011 1:02 PM
To: spectrum
Subject: [spectrum] Spectrum Data Storage

Hi,

Is it possible to customize the storage capacity of the spectrum database. 

By default only last 3 months data (events and alarms) are available in 
Spectrum.

Regards,
Kavi

 
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum cliff.hungerf...@monsanto.com
This e-mail message may contain privileged and/or confidential information, and 
is intended to be received only by persons entitled
to receive such information. If you have received this e-mail in error, please 
notify the sender immediately. Please delete it and
all attachments from any servers, hard drives or any other media. Other use of 
this e-mail by you is strictly prohibited.

All e-mails and attachments sent and received are subject to monitoring, 
reading and archival by Monsanto, including its
subsidiaries. The recipient of this e-mail is solely responsible for checking 
for the presence of Viruses or other Malware.
Monsanto, along with its subsidiaries, accepts no liability for any damage 
caused by any such code transmitted by or accompanying
this e-mail or any attachment.


The information contained in this email may be subject to the export control 
laws and regulations of the United States, potentially
including but not limited to the Export Administration Regulations (EAR) and 
sanctions regulations issued by the U.S. Department of
Treasury, Office of Foreign Asset Controls (OFAC).  As a recipient of this 
information you are obligated to comply with all
applicable U.S. export laws and regulations.

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum Data Storage

[Hilmar Preuße]

On 11.10.2011 20:02, kavi arasu wrote:

Hi,

 Is it possible to customize the storage capacity of the spectrum database. 
 
 By default only last 3 months data (events and alarms) are available in 
 Spectrum.
 
...and if you're running Spectrum 9.1 H15 even the aging feature is broken i.e.
the data is kept forever. ;-(

H.
-- 
  Hilmar Preuße   amasol AG
  Senior Consultant   Campus Neue Balan
  Tel   +49 89 1894743-18 Claudius-Keller-Straße 3b
  Fax   +49 89 1894743-99 D-81669 München
  eMail preu...@amasol.de http://www.amasol.de/

amasol Aktiengesellschaft für Informations- und Kommunikationstechnologie
Aufsichtsrat: Prof. Dr. Stephan Kaiser (Vorsitzender)
Vorstand: Wolfgang Bachmann, Stefan Deml, Thomas Dirsch, Frank Jahn
  Johann Maurer
Amtsgericht München HRB 128327, Sitz der Gesellschaft München

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum Data Storage

[Bohra, Saurabh]

Look into $SPECROOT/SS/DDM/.configrc file. I think the default is 45 days. I do 
not recall the variable on top of my head. You will have to restart SS, to make 
the changes affective.
Remember if you have DDMdb backups configured, you should have enough disk 
space before changing.


From: kavi arasu [kaviaras...@gmail.com]
Sent: Tuesday, October 11, 2011 2:02 PM
To: spectrum
Subject: [spectrum] Spectrum Data Storage

Hi,

Is it possible to customize the storage capacity of the spectrum database.

By default only last 3 months data (events and alarms) are available in 
Spectrum.

Regards,
Kavi


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum saurabh.bo...@espn.com

Please consider the environment before printing this e-mail.
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum 9.2 H04 NCM saved config configuration

[Calvin Lane]

Hello Steve,

Look under General Configuration on Configuration Manager's Information tab.  
There is an editable field that is titled: Maximum Stored Configurations Per 
Device.  The default is 25, but you can modify the number.  You obviously want 
to take into consideration storage issues when modifying this setting, as it 
applies to all devices managed in NCM.  

Regards,

Calvin Lane

-Original Message-
From: nmitsteve [mailto:steveh...@hotmail.com] 
Sent: Thursday, September 29, 2011 9:18 AM
To: spectrum
Subject: [spectrum] Spectrum 9.2 H04 NCM saved config configuration

Hi,

In NCM the default retention for saved configurations is 25 we need to keep 
config changes that could number into the 100's can anyone advise or comment on 
this?

Cheers,

Steve
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum calvin.l...@gmail.com


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum- SystemEdge - monitoring Windows Services - Email found in subject

[John Vasquez]

Hi, parameter is Proc Alive, but you could also define monitor for this 
element as Windows Service as defined in System Edge user guide Pag 254. If 
what you are looking for is just start or stop alarms you could model this 
process in the RFC2790 options (Host System Resource Manager User Guide, Chap 
2).

Regards,
John Vásquez V.
SYNERGY

-Original Message-
From: Huber, Jürgen [mailto:jhu...@ashland.com] 
Sent: martes, 27 de septiembre de 2011 8:30
To: spectrum
Subject: [spectrum] Spectrum- SystemEdge - monitoring Windows Services - Email 
found in subject

Dear all,

I need to monitor BizTalk Services running on one of our servers and get an 
alarm if one of the services stops. The server is modeled as a SystemEdge host.
Trying to find the relating processes, I didn't find any with parameters that I 
could link to the service that started it.

Is there a way to create Spectrum alarms on the service? We are on version 9.2 
HF04.
I didn't find a hint in the documentation that I looked at. If any of you could 
point me into the right direction/the right document I'd be grateful.

Regards,
Jürgen


__

Jürgen Huber
Tel: +49 2236 9649 247

ISP Global Technologies Deutschland GmbH Ashland Specialty Ingredients 
Emil-Hoffmann-Str. 1a
50996 Koeln 
Germany

Mobile: +49 173 544 17 22
Fax: +49 2236 9649 352   
www.ashland.com



ISP Global Technologies Deutschland GmbH Registergericht Köln, HRB 28529 Sitz 
der Gesellschaft: Köln
Geschäftsführer: Philip Strenger

This email, including any attachments, is for the sole use of the intended 
recipient(s), and may contain information that is confidential or legally 
protected. If you are not the intended recipient, any disclosure, copying, 
distribution, or use of the contents of this information or any attachments is 
prohibited and may be unlawful. If you have received this electronic 
transmission in error, please reply immediately to the sender by return e-mail 
that you have received the message in error and delete it along with any 
attachments. ISP makes no warranty that this e-mail is error or virus free. 
Thank you. 

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum jo...@it-synergy.net


Synergy


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum sending traps and poolig

[thierry . van-mol]

Which type of device are you using? My experience with Cisco is some type 
of devices and IOS versions have bugs related to snmp informs. Nexus 
switches is one case.

To make sure, you can use tcpdump or snoop to see what is coming really to 
Spectrum.





Kenneth Kirchner k...@kirchners.com a écrit sur 14.09.2011 17:01:15 :

 De : Kenneth Kirchner k...@kirchners.com
 A : spectrum spectrum@listserv.unc.edu
 Date : 14.09.2011 18:43
 Objet : Re: [spectrum] Spectrum sending traps and poolig
 
 We were using v3 traps and things were fine, but I thought informs 
 would be nice to have with the reliable delivery, so I changed all 
 of my snmp-server host statements from v3 trap to v3 inform. 
 Spectrum acted like it did not see anything.  Nothing showed up in 
 the event logs at all, not even the unknown OID stuff you normally 
 get with an unknown trap.  It was a blissfully quiet few days on the
 monitoring front before I realized what was happening and switched 
 it all back to traps.  Other devices that did not support informs 
 continued to trap normally during this test.
 
 So either Spectrum does not know how to handle informs, or there is 
 more to turning it on than just enabling it on the router.  I 
 searched the 9.2 documents and I could not find anything about informs.
 
 -K
 
 On Sep 14, 2011, at 5:34 AM, david klein wrote:
 
 Can you please tell about what aspects of using SNMP Informs did not
 work for you? It is something we've discussed at work, but not 
 tried, and I'd like to learn from your experience. 
 
  -DTK
 

 On Tue, Sep 13, 2011 at 10:50 PM, Kenneth Kirchner k...@kirchners.com 
wrote:
 I tried SNMP informs with Spectrum v9.2H03 and it did not like it. 
 At all.  I went back to regular SNMPv3 traps and everything is fine.
 
 -K
 
 On Sep 13, 2011, at 7:38 PM, david klein wrote:
 
 Syslog messages and SNMP traps are not held for future delivery. You
 can try using SNMP inform messages, if your router supports. It is a
 best practice to have more than one logical and physical path 
 between your NMS and the monitored elements whenever feasible, so 
 that a simple path disruption does not cut off your ability to 
 manage and remediate. 

 On Tue, Sep 13, 2011 at 7:33 AM, Gasper Krajnik 
 gasper.kraj...@evertec-technology.si wrote:
 Hello all,
 
 We have Cisco routers which sending traps to Spectrum. If I unplug 
 LAN cable, we get alarm, what is OK. Then I work something via 
 serial connection and everything is written in Cisco syslog. When I 
 plug in LAN cable, I would like to get all events which was written 
 to syslog after LAN cable was unplugged, not only from that time 
 when router is plugged in.
 
 Any idea how to get it?
 
 Thanks in advance.
 
 Best regards, 
 
 Gasper
 --To unsubscribe from spectrum, send email to lists...@unc.edu with 
 the body: unsubscribe spectrum r...@nachtmaus.us 
 

 
 -- 
 
 david t. klein
 
 Cisco Certified Network Associate (CSCO11281885)
 Linux Professional Institute Certification (LPI000165615)
 Redhat Certified Engineer (805009745938860)
 
 Quis custodiet ipsos custodes?
 
 

 --To unsubscribe from spectrum, send email to lists...@unc.edu with 
 the body: unsubscribe spectrum k...@kirchners.com 
 
 --To unsubscribe from spectrum, send email to lists...@unc.edu with 
 the body: unsubscribe spectrum r...@nachtmaus.us 
 

 
 -- 
 
 david t. klein
 
 Cisco Certified Network Associate (CSCO11281885)
 Linux Professional Institute Certification (LPI000165615)
 Redhat Certified Engineer (805009745938860)
 
 Quis custodiet ipsos custodes?
 
 

 --To unsubscribe from spectrum, send email to lists...@unc.edu with 
 the body: unsubscribe spectrum k...@kirchners.com 
 
 --To unsubscribe from spectrum, send email to lists...@unc.edu with 
 the body: unsubscribe spectrum thierry.van-...@vd.ch 
---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

RE: [spectrum] Spectrum sending traps and poolig

[Gasper Krajnik]

Cisco router 1841 and 1921

 

And thanks for all answers.

 

Best regards,

 


cid:image001.jpg@01CB0BBF.E8538D80

mag. Gašper Krajnik |  mailto:gasper.kraj...@evertec-technology.si
gasper.kraj...@evertec-technology.si | GSM: +386 41 999 599

 

 

From: thierry.van-...@vd.ch [mailto:thierry.van-...@vd.ch] 
Sent: Thursday, September 15, 2011 9:07 AM
To: spectrum
Subject: Re: [spectrum] Spectrum sending traps and poolig

 

Which type of device are you using? My experience with Cisco is some type of
devices and IOS versions have bugs related to snmp informs. Nexus switches
is one case. 

To make sure, you can use tcpdump or snoop to see what is coming really to
Spectrum. 





Kenneth Kirchner k...@kirchners.com a écrit sur 14.09.2011 17:01:15 :

 De : Kenneth Kirchner k...@kirchners.com 
 A : spectrum spectrum@listserv.unc.edu 
 Date : 14.09.2011 18:43 
 Objet : Re: [spectrum] Spectrum sending traps and poolig 
 
 We were using v3 traps and things were fine, but I thought informs 
 would be nice to have with the reliable delivery, so I changed all 
 of my snmp-server host statements from v3 trap to v3 inform.  
 Spectrum acted like it did not see anything.  Nothing showed up in 
 the event logs at all, not even the unknown OID stuff you normally 
 get with an unknown trap.  It was a blissfully quiet few days on the
 monitoring front before I realized what was happening and switched 
 it all back to traps.  Other devices that did not support informs 
 continued to trap normally during this test. 
 
 So either Spectrum does not know how to handle informs, or there is 
 more to turning it on than just enabling it on the router.  I 
 searched the 9.2 documents and I could not find anything about informs. 
 
 -K 
 
 On Sep 14, 2011, at 5:34 AM, david klein wrote: 
 
 Can you please tell about what aspects of using SNMP Informs did not
 work for you? It is something we've discussed at work, but not 
 tried, and I'd like to learn from your experience. 
 
  -DTK 
 

 On Tue, Sep 13, 2011 at 10:50 PM, Kenneth Kirchner k...@kirchners.com
wrote: 
 I tried SNMP informs with Spectrum v9.2H03 and it did not like it.  
 At all.  I went back to regular SNMPv3 traps and everything is fine. 
 
 -K 
 
 On Sep 13, 2011, at 7:38 PM, david klein wrote: 
 
 Syslog messages and SNMP traps are not held for future delivery. You
 can try using SNMP inform messages, if your router supports. It is a
 best practice to have more than one logical and physical path 
 between your NMS and the monitored elements whenever feasible, so 
 that a simple path disruption does not cut off your ability to 
 manage and remediate. 

 On Tue, Sep 13, 2011 at 7:33 AM, Gasper Krajnik 
 gasper.kraj...@evertec-technology.si wrote: 
 Hello all, 
   
 We have Cisco routers which sending traps to Spectrum. If I unplug 
 LAN cable, we get alarm, what is OK. Then I work something via 
 serial connection and everything is written in Cisco syslog. When I 
 plug in LAN cable, I would like to get all events which was written 
 to syslog after LAN cable was unplugged, not only from that time 
 when router is plugged in. 
   
 Any idea how to get it? 
   
 Thanks in advance. 
   
 Best regards, 
   
 Gasper 
 --To unsubscribe from spectrum, send email to lists...@unc.edu with 
 the body: unsubscribe spectrum r...@nachtmaus.us 
 

 
 -- 
 
 david t. klein
 
 Cisco Certified Network Associate (CSCO11281885)
 Linux Professional Institute Certification (LPI000165615)
 Redhat Certified Engineer (805009745938860)
 
 Quis custodiet ipsos custodes?
 
 

 --To unsubscribe from spectrum, send email to lists...@unc.edu with 
 the body: unsubscribe spectrum k...@kirchners.com 
 
 --To unsubscribe from spectrum, send email to lists...@unc.edu with 
 the body: unsubscribe spectrum r...@nachtmaus.us 
 

 
 -- 
 
 david t. klein
 
 Cisco Certified Network Associate (CSCO11281885)
 Linux Professional Institute Certification (LPI000165615)
 Redhat Certified Engineer (805009745938860)
 
 Quis custodiet ipsos custodes?
 
 

 --To unsubscribe from spectrum, send email to lists...@unc.edu with 
 the body: unsubscribe spectrum k...@kirchners.com 
 
 --To unsubscribe from spectrum, send email to lists...@unc.edu with 
 the body: unsubscribe spectrum thierry.van-...@vd.ch 

*   --To unsubscribe from spectrum, send email to lists...@unc.edu with
the body: unsubscribe spectrum gasper.kraj...@evertec-technology.si 


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.comimage001.jpg

Re: [spectrum] Spectrum sending traps and poolig

[david klein]

Can you please tell about what aspects of using SNMP Informs did not work
for you? It is something we've discussed at work, but not tried, and I'd
like to learn from your experience.


 -DTK


On Tue, Sep 13, 2011 at 10:50 PM, Kenneth Kirchner k...@kirchners.comwrote:

 I tried SNMP informs with Spectrum v9.2H03 and it did not like it.  At all.
  I went back to regular SNMPv3 traps and everything is fine.

 -K

 On Sep 13, 2011, at 7:38 PM, david klein wrote:


 Syslog messages and SNMP traps are not held for future delivery. You can
 try using SNMP inform messages, if your router supports. It is a best
 practice to have more than one logical and physical path between your NMS
 and the monitored elements whenever feasible, so that a simple path
 disruption does not cut off your ability to manage and remediate.

 On Tue, Sep 13, 2011 at 7:33 AM, Gasper Krajnik 
 gasper.kraj...@evertec-technology.si wrote:

 Hello all,

 ** **

 We have Cisco routers which sending traps to Spectrum. If I unplug LAN
 cable, we get alarm, what is OK. Then I work something via serial connection
 and everything is written in Cisco syslog. When I plug in LAN cable, I would
 like to get all events which was written to syslog after LAN cable was
 unplugged, not only from that time when router is plugged in.

 ** **

 Any idea how to get it?

 ** **

 Thanks in advance.

 ** **

 Best regards, 

 ** **

 Gasper

- --To unsubscribe from spectrum, send email to lists...@unc.edu with
the body: unsubscribe spectrum r...@nachtmaus.us




 --

 david t. klein

 Cisco Certified Network Associate (CSCO11281885)
 Linux Professional Institute Certification (LPI000165615)
 Redhat Certified Engineer (805009745938860)

 Quis custodiet ipsos custodes?




- --To unsubscribe from spectrum, send email to lists...@unc.edu with
the body: unsubscribe spectrum k...@kirchners.com



- --To unsubscribe from spectrum, send email to lists...@unc.edu with
the body: unsubscribe spectrum r...@nachtmaus.us




-- 

david t. klein

Cisco Certified Network Associate (CSCO11281885)
Linux Professional Institute Certification (LPI000165615)
Redhat Certified Engineer (805009745938860)

Quis custodiet ipsos custodes?

---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com

Re: [spectrum] Spectrum sending traps and poolig

[Kenneth Kirchner]

We were using v3 traps and things were fine, but I thought informs would be 
nice to have with the reliable delivery, so I changed all of my snmp-server 
host statements from v3 trap to v3 inform.  Spectrum acted like it did not see 
anything.  Nothing showed up in the event logs at all, not even the unknown OID 
stuff you normally get with an unknown trap.  It was a blissfully quiet few 
days on the monitoring front before I realized what was happening and switched 
it all back to traps.  Other devices that did not support informs continued to 
trap normally during this test.

So either Spectrum does not know how to handle informs, or there is more to 
turning it on than just enabling it on the router.  I searched the 9.2 
documents and I could not find anything about informs.

-K

On Sep 14, 2011, at 5:34 AM, david klein wrote:

 
 Can you please tell about what aspects of using SNMP Informs did not work for 
 you? It is something we've discussed at work, but not tried, and I'd like to 
 learn from your experience. 
 
 
  -DTK
 
 
 On Tue, Sep 13, 2011 at 10:50 PM, Kenneth Kirchner k...@kirchners.com wrote:
 I tried SNMP informs with Spectrum v9.2H03 and it did not like it.  At all.  
 I went back to regular SNMPv3 traps and everything is fine.
 
 -K
 
 On Sep 13, 2011, at 7:38 PM, david klein wrote:
 
 
 Syslog messages and SNMP traps are not held for future delivery. You can try 
 using SNMP inform messages, if your router supports. It is a best practice 
 to have more than one logical and physical path between your NMS and the 
 monitored elements whenever feasible, so that a simple path disruption does 
 not cut off your ability to manage and remediate. 
 
 On Tue, Sep 13, 2011 at 7:33 AM, Gasper Krajnik 
 gasper.kraj...@evertec-technology.si wrote:
 Hello all,
 
  
 
 We have Cisco routers which sending traps to Spectrum. If I unplug LAN 
 cable, we get alarm, what is OK. Then I work something via serial connection 
 and everything is written in Cisco syslog. When I plug in LAN cable, I would 
 like to get all events which was written to syslog after LAN cable was 
 unplugged, not only from that time when router is plugged in.
 
  
 
 Any idea how to get it?
 
  
 
 Thanks in advance.
 
  
 
 Best regards,
 
  
 
 Gasper
 
 --To unsubscribe from spectrum, send email to lists...@unc.edu with the 
 body: unsubscribe spectrum r...@nachtmaus.us
 
 
 
 -- 
 
 david t. klein
 
 Cisco Certified Network Associate (CSCO11281885)
 Linux Professional Institute Certification (LPI000165615)
 Redhat Certified Engineer (805009745938860)
 
 Quis custodiet ipsos custodes?
 
 
 
 --To unsubscribe from spectrum, send email to lists...@unc.edu with the 
 body: unsubscribe spectrum k...@kirchners.com
 
 --To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
 unsubscribe spectrum r...@nachtmaus.us
 
 
 
 -- 
 
 david t. klein
 
 Cisco Certified Network Associate (CSCO11281885)
 Linux Professional Institute Certification (LPI000165615)
 Redhat Certified Engineer (805009745938860)
 
 Quis custodiet ipsos custodes?
 
 
 
 --To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
 unsubscribe spectrum k...@kirchners.com


---
To unsubscribe from spectrum, send email to lists...@unc.edu with the body: 
unsubscribe spectrum arch...@mail-archive.com