of the JWP. We have three turning centers running Linuxcnc and
I have been desparately trying to figure this out, but I'm no where near as
computer savvy as most all of you guys on the mailing lists.
Thanks
Rick Lair
Superior Roll Turning LLC.
399 East Center Street
Petersburg MI, 49270
(734) 279
Hello Guys,
I have been trying to break into a file on one of my other machines control,
and I am not succeeding. The file has a .pit file extension,
Any suggestions on what I should use to open it??
Thanks
Rick
Thanks Guys,
The first thing I found was Frhed on a Google search for hex editor, and it
work fine, opened it up and now I just have to be able to decipher it, way
over my head.
It's the plc program from a turning center with a 7 year old Commercial
control on it, and the lathe is a carbon copy
It's a Fagor 8055i Control that was installed back in 2007 from what I can
see. I have looked thru the manuals and they don't have a ladder printout,
like they normally would/should.
I believe its called Boolean??? I can somewhat figure out what is going on,
honestly it looks similar, and I may
We use Run From Line on a daily basis, and have found the best way to get
things to run properly is to go back to most recent spindle start/tool
call/operation start, and start from there. If he is starting from that line
G00 X76,4500 Y467,8691, I don't see anything to start the water jet, which I
The webpage changed to http://store.mesanet.com http://store.mesanet.com/
Thanks
Rick Lair
Superior Roll Turning LLC.
PH: 734-279-1831
www.superiorroll.com
--
Slashdot TV.
Video for Nerds
FM2A88M-HD+ with AMD -4020 processors, and have no use for these. 2 of the
Gigabyte boards are used, and 1of the Intel boards are used. Some have
boxes, no memory included.
Let me know if interested.
Thanks
Rick Lair
Superior Roll Turning LLC.
PH: 734-279-1831
www.superiorroll.com
We will sell them for $40.00 a piece, shipping included. We will email a
PayPal invoice to handle payment, and will ship out USPS Priority Flat rate
box, when payment clears.
Feel free to contact me at 734-279-1831 for any other questions.
Thanks
Rick Lair
Superior Roll Turning LLC.
PH
Just an update, I only have 1 Intel board, and 4 Gigabyte boards left.
Thanks
Rick Lair
Superior Roll Turning LLC.
PH: 734-279-1831
www.superiorroll.com
--
Slashdot TV.
Video for Nerds. Stuff
I would rather use the din rail mounts, but they are orientated 90
degrees off of how I mount the boards, or so it looks like on the mesa
web page.
Thanks
Rick
--
Download BIRT iHub F-Type - The Free
Not sure if this compatible or not, but I was just perusing thru
Automation Directs web page, and noticed this. Its new for them, and it
looks interesting, and I would be willing to try it out for grins if it
would work with Linuxcnc.
I already use a lot of mesa components, I just received an over 25 piece
order from them, and Mesa is definitely cheaper than these are.
I just threw them out there, I was doing a little shopping, and saw
these scroll across their page.
Out of curiosity though, Peter, could these be connected
, Rick Lair wrote:
I would rather use the din rail mounts, but they are orientated 90
degrees off of how I mount the boards, or so it looks like on the
mesa
web page.
Thanks
Rick
--
Download BIRT iHub F
All the machines in our shop (Cincinnati Milacron, Fagor, Hermle, just
to name a few) that are able to perform a jog move during a
paused/feedhold state, take a straight and direct path back to where the
pause was enabled, at whatever the maximum jog speed rate is.
In saying this, we
Not at a rapid rate, at the maximum jog rate, 50-60 ipm, not the 400-600
ipm for the rapids.
Thanks
Rick
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your
I would have to agree with that from HAAS, it sounds like a pretty good
description of what needs to happen.
Thanks
Rick
Superior Roll Turning
399 East Center Street
Petersburg MI, 49270
734-279-1831
www.superiorroll.com
Quote
A user must be able to push PAUSE, than take his jog Wheel or even the
jog button from the GUI, move around like he wish and if he push resume,
the machine should start at the position he paused the program.
End Quote
That is exactly what we have been talking about/looking for,
Dave,
In MK it does about the same thing that dgarretts moveoff component
does, you set an amount in a popup/side bar and press enable, and then
it moves whatever the amount is you entered. The MK version though
leaves the values that you entered, and if you press resume, make some
chips,
I can definitely tell you no that is not how it looks or works, I have
been sitting here for the last half hour using that, and that's not it.
If that was how it did work and look it would be a decent work around.
If I knew how print screen' worked in Debian, I would post a picture.
Thanks
Here it is,
http://postimg.org/image/yqmjgbiv9/
Thanks
Rick
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with
I would have to take a guess and say, that would work with any GUI
correct?
Rick
--
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and
It looks like over 1500 'millions of hours' of 'Mean Time Between
Failures'
Thanks
Rick
-- Original Message --
From: andy pugh bodge...@gmail.com
To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
Sent: 12/3/2014 7:20:32 AM
Subject: [Emc-users] MTBF
Does
Hello Guys,
Figured this might be as best place as any to ask,
Would anybody happen to know of any suppliers of replacement rubber
buttons for printed circuit boards?
We have 4 Cincinnati milacron Avenger series turning centers,Circa
1995-96 that the controls are pretty rock solid, except for
Maybe something like this?
http://www.newark.com/multicomp/mcmf0w4bb1001a5/metal-film-resistor-1kohm-250mw/dp/97M6267
Rick
On 4/13/2015 3:02 PM, Gene Heskett wrote:
On Monday 13 April 2015 14:37:36 Rick Lair wrote:
I have plenty room really, I just don't have the slightest idea what
resistor
Just ordered some wire and am going to send it to the 7i70.
Rick
On 4/13/2015 3:02 PM, Gene Heskett wrote:
On Monday 13 April 2015 14:37:36 Rick Lair wrote:
I have plenty room really, I just don't have the slightest idea what
resistor to use, I know how to get it wired into the system
cable back
to the 7i70 and forget about it.
If you go with pullup resistors, they can be done nicely on a terminal
strip (multilevel is best) but that takes space and I don't know how
much you have.
Dave
On 4/13/2015 11:26 AM, Rick Lair wrote:
What would be the best course of action
board found
Any Thoughts?
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
www.superiorroll.com
--
BPM Camp - Free Virtual Workshop May 6th
running on 5i23's with
pwmgen's.
Any idea's or a direction to head in for different documentation on
setting them up?
I wouldn't think that would have changed going to a debian build using
the hm2_eth driver.
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg
What type of resistor do you recommend, 10Kohms I presume, but what
wattage, voltage, construction?
I am looking at http://www.newark.com/through-hole-resistors right now.
Rick
On 4/13/2015 1:12 PM, Peter C. Wallace wrote:
On Mon, 13 Apr 2015, Rick Lair wrote:
Date: Mon, 13 Apr 2015 12:55
Pull Down Resistor correct?
pull down resistor
And this is a pull up resistor correct?
Pull up resistor
Rick
--
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance
centrally in
the shop itself, off of the main wireless router in the office, we have
5 or 6 PC's randomly throughout the shop for programming, that all run
off the wireless.
Rick
On 4/23/2015 9:48 AM, Gene Heskett wrote:
On Thursday 23 April 2015 09:15:55 Rick Lair wrote:
Good Morning All,
Can
of the table is 0.000 and full z up (tool change
position) is at 25.000, how do I set the TOOL_CHANGE_QUILL_UP value to
be 25.000, or will it use the z value in the TOOL_CHANGE_POSITION?
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX
:44AM -0400, Rick Lair wrote:
Question regarding the INI entry regarding tool change on a VMC,
TOOL_CHANGE_POSITION, says that this can be combined with
TOOL_CHANGE_QUILL_UP, which it looks like TOOL_CHANGE_QUILL_UP will send
the z axis to the 0.000 position in absolute coodinates. Our machine
than using the Network Manager utility.
Or does this actually mean my wireless signal from the router could be
going in and out due to it's distance from the router?
Rick
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279
on a piece of A-36 HR, stick out like a sore thumb on this material.
Rick
On 5/11/2015 11:05 AM, andy pugh wrote:
On 11 May 2015 at 15:53, Rick Lair r...@superiorroll.com wrote:
Any thoughts/ pointers as to what may be causing this?
It sounds like the PID tuning might be off. Is this
LinuxCNC
and calculate the peak as sqrt(Sine^2+Cosine^2)
I would do this with machine off, an measure at the individual leads
coming off of the resolver correct?
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
www.superiorroll.com
, but the feedback is choppy,
matching what I see in the motor shaft. It's not severe enough to break
things, or even hear it while in motion, but bad enough that the finish
is not acceptable.
Any thoughts/ pointers as to what may be causing this?
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East
I had 0.1 in the entry.
On 5/11/2015 12:43 PM, andy pugh wrote:
On 11 May 2015 at 17:05, Rick Lair r...@superiorroll.com wrote:
I thought that the deadband value would only effect the positioning when
the axis was idle, not while in motion?
No, it is the position error required before
that the deadband value would only effect the positioning when
the axis was idle, not while in motion?
Rick
On 5/11/2015 11:51 AM, Karlsson Wang wrote:
Mechanical problem?
On Mon, 11 May 2015 11:10:52 -0400
Rick Lair r...@superiorroll.com wrote:
Its Linuxcnc controlled, and has been running
://lists.sourceforge.net/lists/listinfo/emc-users
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
www.superiorroll.com
--
One dashboard
this to keep continuity among the controls,
Rick
On 4/24/2015 11:16 AM, Chris Radek wrote:
On Fri, Apr 24, 2015 at 11:07:44AM -0400, Rick Lair wrote:
Question regarding the INI entry regarding tool change on a VMC,
TOOL_CHANGE_POSITION, says that this can be combined with
TOOL_CHANGE_QUILL_UP, which
, it is at +25.000
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
www.superiorroll.com
--
One dashboard for servers and applications
-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
www.superiorroll.com
M131
#!/bin/sh
#orient pin in
halcmd sets orient-pin-in true
exit 0
Is this error due to my remapped code, or is something else going wrong?
Thanks
Rick
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
on the CD, and not the ones I
created when compiling?
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
www.superiorroll.com
--
BPM Camp - Free
)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 7i73 Inputs
On 13 April 2015 at 16:26, Rick Lair r...@superiorroll.com wrote:
What would be the best course of action to utilize 0-7 for inputs like
through 7 have no pull-up or pull-down resistors so are
a bit awkward to use with switches.
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
www.superiorroll.com
Good Morning Guys,
Does anyone know if I need to do anything special to use inputs 0-7 as
standard inputs on a Mesa 7i73, I see they are listed as analog inputs
for use with potentiometers and such, but I want/hope to be able to run
some push buttons into those inputs.
--
Thanks
Rick Lair
-rtai
So I guess it checks for what type of RTOS you have installed(? rtai,
rt-preempt, or xenomai) then invokes an install.
On 04/08/2015 11:41 AM, Kirk Wallace wrote:
On 04/08/2015 11:27 AM, Rick Lair wrote:
Or can I just run that command,
aptitude -t wheezy-backports install linux-image
7i73
Rick
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
www.superiorroll.com
--
BPM Camp - Free Virtual Workshop May 6th at 10am PDT
Andy,
Can I open another terminal to run halcmd show all? Or do I need to run
that from inside Linuxcnc?
Rick
On 4/14/2015 7:34 AM, andy pugh wrote:
On 14 April 2015 at 12:21, Rick Lair r...@superiorroll.com wrote:
I have made good head way since yesterday, communicating thru the new
NIC
=Sourceforge_BPM_Camp_5_6_15utm_medium=emailutm_campaign=VA_SF
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279
is
not an option yet in the utility, and just want to try to get my
files
roughed out with that, instead of trying to hand write my HAL
file
from
scratch.
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279
-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15utm_medium=emailutm_campaign=VA_SF
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Thanks
Rick Lair
Superior Roll Turning LLC
I should be able to run the mesaflash utility from my home directory, as
long as the .bit file is in that directory correct?
Also, I don't have to do anything jumper wise to make this happen do I?
I tried running running the mesaflash --device 7i80 --write
7i80hd_16_rmesvss6_6.bit and all I
back at the forum I saw one of
your replies, that That bitfile is also in the 7I80.zip support
distribution zipfile.
Does that mean that it will run what I need from the start then? and all
I need to do change the IP address?
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center
network, when using the 7i80.
Could the on-board WiFi be causing my communication problem?
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
www.superiorroll.com
the Ethernet on the
motherboard. I still don't have a connection to the LAN from that
computer. Any clues as to what I need to do?
Thanks
JT
--
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
.
You can get the rt_preempt kernel from the debian repository.
I think it is 3.2.0-4-rt-686-pae
the second issue is that linux isn't seeing your nic.
my first try would be to install the rt_preempt kernel and see if it
loads your nic.
sam
On 4/8/2015 10:33 AM, Rick Lair wrote:
ip link
@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
www.superiorroll.com
--
BPM
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
www.superiorroll.com
:10 PM, Rick Lair wrote:
And I looked in my bios settings, I don't even see where to turn off the
ethernet port.
On 4/8/2015 12:18 PM, Peter C. Wallace wrote:
On Wed, 8 Apr 2015, sam sokolik wrote:
Date: Wed, 08 Apr 2015 11:12:25 -0500
From: sam sokolik sa...@empirescreen.com
Reply
, Peter C. Wallace wrote:
On Tue, 7 Apr 2015, Rick Lair wrote:
Date: Tue, 07 Apr 2015 14:14:58 -0400
From: Rick Lair r...@superiorroll.com
To: Peter Wallace p...@mesanet.com
Subject: Re: [Emc-users] 7i80 Setup ( Was PNCConf setup)
I don't know if the SF server crashed or what, but here
the
manager gui.
http://linuxcnc.org/docs/2.7/html/man/man9/hm2_eth.9.html
Also - you need to be using 2.7+ of linuxcnc for Ethernet support.
sam
On 4/8/2015 9:56 AM, Rick Lair wrote:
A few questions, on setting up a network connection and static IP
1. Should I use the Network Manager GUI
Or can I just run that command,
aptitude -t wheezy-backports install linux-image-$(uname -r|sed
's,[^-]*-[^-]*-,,')
and it will apply it to my current kernel.
Rick
On 4/8/2015 1:35 PM, Peter C. Wallace wrote:
On Wed, 8 Apr 2015, Rick Lair wrote:
Date: Wed, 08 Apr 2015 13:30:06 -0400
uname -a resulted with,
Linux greenmill 3.4-9-rtai-686-pae #1 SMP PREEMPT Debian
3.4.55-4linuxcnc i686 GNU/Linux
dmesg | grep eth didn't do anything.
Rick
On 4/8/2015 11:22 AM, Peter C. Wallace wrote:
On Wed, 8 Apr 2015, Rick Lair wrote:
Date: Wed, 08 Apr 2015 11:17:15 -0400
From: Rick
54:27:1e:61:b9:6f brd ff:ff:ff:ff:ff:ff
greenmill@greenmill:~$
On 4/8/2015 11:29 AM, sam sokolik wrote:
The directions are assuming you are connecting to eth1 - Are you? Do a
ip link
and see what physical connnections you have..
sam
On 4/8/2015 10:17 AM, Rick Lair wrote:
I just did all
/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15utm_medium=emailutm_campaign=VA_SF
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Thanks
Rick Lair
-686-pae #1 SMP PREEMPT Debian 3.4.55-4linuxcnc i686 GNU/Linux
Rick
On 4/8/2015 1:35 PM, Peter C. Wallace wrote:
On Wed, 8 Apr 2015, Rick Lair wrote:
Date: Wed, 08 Apr 2015 13:30:06 -0400
From: Rick Lair r...@superiorroll.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users
;y
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
in the
log:
/home/testpc/linuxcnc_debug.txt
and
/home/testpc/linuxcnc_print.txt
as well as in the output of the shell command 'dmesg' and in the terminal
testpc@testpc:~/linuxcnc-dev$
On 6/5/2015 9:24 AM, andy pugh wrote:
On 5 June 2015 at 12:28, Rick Lair r...@superiorroll.com wrote
I do, I did a fresh pull as well, and re-compiled just last week as well.
On 6/5/2015 12:38 PM, andy pugh wrote:
On 5 June 2015 at 17:34, Rick Lair r...@superiorroll.com wrote:
Now I get sudo: halcompile: command not found,
Wierd.
sudo apt-get install linuxcnc-dev
Might help, but I didn't
/2015 12:41 PM, Sebastian Kuzminsky wrote:
On 6/5/15 10:38 AM, andy pugh wrote:
On 5 June 2015 at 17:34, Rick Lair r...@superiorroll.com wrote:
Now I get sudo: halcompile: command not found,
Wierd.
sudo apt-get install linuxcnc-dev
Might help, but I didn't think that was necessary, and I would
2015 10:54:30 Rick Lair wrote:
I keep getting sudo: comp: command not found
There has been a name change Rick, it is now halcompile
On 6/5/2015 10:20 AM, andy pugh wrote:
On 5 June 2015 at 15:12, Rick Lair r...@superiorroll.com wrote:
./toolchange.hal:1: Can't find module 'carousel' in
Yes, you
. Do I need to
look at integrating something in order to have a better positioning
signal coming from the carousel in order to use your component?
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
I keep getting sudo: comp: command not found
On 6/5/2015 10:20 AM, andy pugh wrote:
On 5 June 2015 at 15:12, Rick Lair r...@superiorroll.com wrote:
./toolchange.hal:1: Can't find module 'carousel' in
Yes, you do need to install the new component.
sudo comp --install --install-doc
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
I'm with Pete, Jealous as Hell,
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
www.superiorroll.com
at that index style feedback you
commented on, regarding our machine? I really like the ease of use you
put into that component, and would love to run it on our machine.
Thanks
Rick
On 6/10/2015 9:01 AM, Andy Pugh wrote:
On 10 Jun 2015, at 13:18, Rick Lair r...@superiorroll.com wrote:
only have
No problem Andy,
Good things come to those who wait :)
I have my hands full again anyway re-tuning this thing.
Rick
On 6/15/2015 12:13 PM, andy pugh wrote:
On 15 June 2015 at 16:51, Rick Lair r...@superiorroll.com wrote:
Andy, have you had a chance to look at that index style feedback you
though, it wouldn't fire up
be cause it was sitting on one of the Y axis over-travel switches, I
cranked it off the switch, and it came to life, now to just get the
spindle going, and we should be good.
Thanks
Rick
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
://my.ebay.com/ws/eBayISAPI.dll?MyEbayBetaCurrentPage=MyeBayNextSellingssPageName=STRK:ME:LNLK:MESEX
This seems to link to the personal selling page of the viewer.
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
two analogue proximity
sensors at 90 degrees and an eccentric target.
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
www.superiorroll.com
there, as to whether I put Linuxcnc on
it, or get rid of it.
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
www.superiorroll.com
--
Don't Limit
/listinfo/emc-users
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Thanks
Rick Lair
Superior Roll
, mailing lists, and IRC, and especially to the people who worked
on the code docs for this release:
Andy Pugh
Chris Radek
Jeff Epler
John Thornton
Moses McKnight
Norbert Schechner
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
. Start Your Cloud Today.
https://www.gigenetcloud.com/
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
will remove that straight away from what you are saying.
Rick
On 7/15/2015 12:21 PM, Sebastian Kuzminsky wrote:
On 7/15/15 10:00 AM, Rick Lair wrote:
What is the proper way then to do that, take for instance the M41, it is
supposed to signal the low gear change command.
I put those
)
# all good
return INTERP_OK
except Exception, e:
self.set_errormsg(T%d index_fanuc_lathe_tool: %s %
(int(words['t']), e))
return INTERP_ERROR
Rick
On 7/15/2015 1:14 PM, Sebastian Kuzminsky wrote:
On 7/15/15 10:59 AM, Rick Lair wrote:
I'm not trying
What are the limitations on program size?
On 7/15/2015 1:14 PM, Sebastian Kuzminsky wrote:
On 7/15/15 10:59 AM, Rick Lair wrote:
I'm not trying to do anything special, or use any thing special, That
was just what I managed to cobble together to get those m-code functions
together
delay could happen.
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
www.superiorroll.com
--
Don't Limit Your Business. Reach for the Cloud
this hard for anyone but you to debug.
On 7/15/15 9:36 AM, Rick Lair wrote:
Here are the codes,
And you are correct, bytes not kilobytes,
On 7/15/2015 11:20 AM, Sebastian Kuzminsky wrote:
On 7/15/15 8:54 AM, Rick Lair wrote:
Hello Seb,
I have been working on this all week, I have run
On 7/15/2015 11:53 AM, Sebastian Kuzminsky wrote:
Your M-codes are poking Motion pins that don't exist in LinuxCNC.
You must be using some other version, or be using some local patches, or
something. That will make this hard for anyone but you to debug.
On 7/15/15 9:36 AM, Rick Lair wrote
Here are the codes,
And you are correct, bytes not kilobytes,
On 7/15/2015 11:20 AM, Sebastian Kuzminsky wrote:
On 7/15/15 8:54 AM, Rick Lair wrote:
Hello Seb,
I have been working on this all week, I have run this program numerous
times on my simulator test PC in my office without any
the
threading in the program. We use a post processor for our programs and
have
done threading in the past but this one is persistent. Any Ideas?
Can you reproduce the problem by running the problematic gcode in a
standard sim config?
--
Thanks
Rick Lair
Superior Roll Turning LLC
399
This error is showing up on 2.6.4 and 2.6.8. The machine was 2.6.4
yesterday morning, so we updated it 2.6.8 thinking that might fix it.
Rick
On 7/15/2015 11:20 AM, Sebastian Kuzminsky wrote:
On 7/15/15 8:54 AM, Rick Lair wrote:
Hello Seb,
I have been working on this all week, I have run
by running the problematic gcode in a
standard sim config?
--
Thanks
Rick Lair
Superior Roll Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
www.superiorroll.com
%
N10G18G90
N20 G00X10.0Z1.5T0101 (T1 #NUCOR SHEAR PIN 7 9 1ST SIDE 907-44281
for the help guys,,,
https://youtu.be/HwXmZDTMeCA
More video's to come
--
Thanks
Rick Lair
Superior Roll & Turning LLC
399 East Center Street
Petersburg MI, 49270
PH: 734-279-1831
FAX: 734-279-1166
www.superiorroll
ave to wonder why your not using iocontrol.0.tool-change and
> iocontrol.0.tool-changed or am I totally off track and not understanding
> the application?
>
> JT
>
> On 11/11/2015 7:13 AM, Rick Lair wrote:
>> Good Morning Gentleman,
>>
>> Is it possible, to call
How will your carousel component handle that "0"?
On 11/11/2015 8:42 AM, andy pugh wrote:
> On 11 November 2015 at 13:38, Rick Lair <r...@superiorroll.com> wrote:
>> I am not sure how to use the M6 command to put the currently loaded tool
>> away, ba
1 - 100 of 185 matches
Mail list logo