Hi all,
I feel like I'm losing my mind here. It's been a while since I configured
named and I can't quite figure out what I'm doing wrong here. Here is my
understanding of what is needed to get (a very basic configuration of)
named running with a few A records in place:
# sh make-localhost
Hey,
I have a couple Adaptec 2410SA Raid cards (aac driver) and I
was wondering if anyone has had any luck with being able to
hotswap drives in FreeBSD 6?
If the Adaptec card is no good for hot swapping under
FreeBSD, what's the recommended brand?
Thanks
Daniel
I've 2230SLP which
On 7/24/06, Tamouh H. [EMAIL PROTECTED] wrote:
Hey,
I have a couple Adaptec 2410SA Raid cards (aac driver) and I
was wondering if anyone has had any luck with being able to
hotswap drives in FreeBSD 6?
If the Adaptec card is no good for hot swapping under
FreeBSD, what's the recommended
Dave wrote:
Hello,
Is there anything up with the freebsd cvsup servers? I've been trying to
update my ports collection for the past two days always getting the same
error message: access limit exceeded. I have tried various servers all with
the same result.
Thanks.
Dave.
Sounds
Hi,
I'm a happy FreeBSD user and I have it installed on my laptop (Toshiba
Tecra A4). However, I noticed recently that my iwi driver goes up and
down frequently then suddenly it stops working. When I check dmesg it says:
iwi0: could not allocate firmware DMA memory
Earlier on 6.1-RELEASE, I was
Hi,
Try this and let us know how it goes.
$ORIGIN example.org.
$TTL 3600; 1 hour
example.org. IN SOAns.example.org. admin.example.org. (
2006072400 ; Serial
1d; Refresh
I have been looking over the tutorial for automounting removable
devices at http://www.caia.swin.edu.au/reports/041130A/ , and have
come to one interesting point. It has the fstab line:
/dev/da0/mnt/usbflash autonoauto 0 0
However, my system doesn't
On 7/24/06, Mikhail Goriachev [EMAIL PROTECTED] wrote:
Hi,
Try this and let us know how it goes.
$ORIGIN example.org.
$TTL 3600; 1 hour
example.org. IN SOAns.example.org. admin.example.org. (
2006072400 ; Serial
- Original Message -
From: Eric Lakin [EMAIL PROTECTED]
To: freebsd-questions@freebsd.org
Sent: Sunday, July 16, 2006 1:47 PM
Subject: Re: DL360 G4 shared network iLo and FreeBSD
On Sun, Jul 16, 2006 at 11:56:47PM +1000, Norberto Meijome wrote:
On Sat, 15 Jul 2006 14:13:57 -0700
On 2006-07-24 17:56, Lennon Cook [EMAIL PROTECTED] wrote:
I have been looking over the tutorial for automounting removable
devices at http://www.caia.swin.edu.au/reports/041130A/ , and have
come to one interesting point. It has the fstab line:
/dev/da0 /mnt/usbflash auto noauto 0 0
Nick Sayer [EMAIL PROTECTED] writes:
I just upgraded my machine at home to a Conroy-ready motherboard - An
Asus P5B. This particular motherboard has the smallest fraction of
recognized devices I think I've ever come across. From what I can
tell, the blame can be placed squarely on the Intel
does FreeBSD (6.1) still operate better on a SCSI drive
system compared to EIDE or SATA ?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
John L [EMAIL PROTECTED] writes:
My laptop has a built-in sound card which works fine, but I would also
like to be able to use a USB handset. I load the snd_uaudio driver
and plug in the handset, the /dev/audio1.x and /dev/dsp1.x devices
appear, but then what?
What do I do to get sound
David Stanford wrote:
Thanks Mikhail, that was it:
=
@ IN NS ns.example.org.
=
No worries, glad to hear it's cranking.
Now it appears to be working correctly and responding to queries, however
I'm noticing I continue to get that same error when I add my
Only OpenSource [EMAIL PROTECTED] writes:
Is there an appletviewer for FreeBSD which integrates with Firefox ?
Java, I assume you mean. Sure; all the different JDK installations
seem to include one.
I have installed diablo-jdk-freebsd6.1-i386.
Yes, that definitely includes one.
pkg_info
Hello,
SUSE seemed to find all of them, and mptable lists them as well. I looked at
lot's
of different man pages, but I could not find any related boot parameter I could
experiment with...
Bye,
CzP
On Sunday 23 July 2006 09:56, Peter Czanik wrote:
/ Hello,
//
// I'm trying to install
Erik Nørgaard [EMAIL PROTECTED] writes:
I am trying to get things up working (FBSD 6.1-STABLE) on a VAIO FJ3S
notebook, but have trouble with some devices: cardbus, wireless network
and sound. And I haven't even tried looking at the built in camera,
memory card reader or firewire ...
It may
Hi,
It is my first fbsd 6.1.
I migrate a system from fbsd 6.0 to 6.1.
I have a script postgresql.sh in /usr/local/etc/rc.d.
It is executible.
Also it is working on 6.0 at startup.
But it do not runs in fbsd 6.1.
If I try /usr/local/etc/rc.d/postgresql.sh start all is
fine.
I
hello. my name is jesus and am writing to you
from argentina.
i am looking for a freebsd livecd.
i have just downloaded fresbie, but i am not
sure if is a freebsd.org or an third-party's
implementation.
does freebsd have a live-cd ? is so, where can i
download it ?
i want to change my
- Original Message -
From: Danial Thom [EMAIL PROTECTED]
To: Greg Barniskis [EMAIL PROTECTED]; Nick Withers
[EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED];
freebsd-questions@freebsd.org
Sent: Thursday, July 13, 2006 11:10 AM
Subject: Re: Are hardware vendors starting to bail
Many of the images will have the same name. I somehow managed to copy
the same files several times when trying to do backup and restores.
At this point in time they are going from my Apple laptop to my
FreeBSD server. I am going to start looking for a inexpensive Tape
drive to back up my
Hi List
I'm reading the man page about the gmirror(8) and see the option:
-h Hardcode providers' names in metadata.
What is this? What it's make?
Thaks for all help
--
Daniel Bristot de Oliveira
http://dbristot.info
R João Paez 409 Ap 202
Sta Augusta - Criciúma - SC
CEP 88805440 Brazil
Hello everyone,
We want to bill whoever sharing our internet connection on a monthly
bases
so basically, I want to release internet access based on time+auth.
my FreeBSD is up and running 6.1R
what should i do next?
I have been told Squid from ports will do the job,
but when i took
Hi,
I'm trying to do this.
i want postfix to accept ANY mail sent to example1.com like a catch
all then any mail that it gets i want it to just bounce it on to
[EMAIL PROTECTED] which is hosted on another server.
So far i can only get postfix to accept from localhost, and when i
set the
I got a SoundBlaster Live! because it was listed as a known working
piece of hardware. Apparently this is a newer version of the board that
isn't supported yet. Getting it to work is becoming a PITA beyond what
I have the time and willpower to put in right now.
Is there a piece of sound
Hello,
Thanks for your suggestion. I've tried cvsup1 through cvsup9 and let it
try to connect upwards of nearly half an hour, i think this issue has
something to do with my boxes, but i don't know what. They can contact the
various cvsup servers, but everytime they always get the access
Hi,
hello. my name is jesus and am writing to you
from argentina.
i am looking for a freebsd livecd.
i have just downloaded fresbie, but i am not
sure if is a freebsd.org or an third-party's
implementation.
From where did you download the CD?
Was is from a freebsd.org location?
For
Hi everybody.
Could anybody tell me the reason why by default FreeBSD
limits the number of groups a user can be member of to 16?
Not all servers have 5000k users and today memory is not an
issue. Indeed, some servers used just for services have
no users apart a few staff users and users to run
Jim Pazarena [EMAIL PROTECTED] writes:
does FreeBSD (6.1) still operate better on a SCSI drive
system compared to EIDE or SATA ?
For some values of better, yes. Especially if the drive supports
tagged queueing and your environment has a number of different
workloads competing with each other.
Hey,
I have a couple Adaptec 2410SA Raid cards (aac driver) and I was
wondering if anyone has had any luck with being able to hotswap
drives in FreeBSD 6?
If the Adaptec card is no good for hot swapping under FreeBSD,
what's the recommended brand?
Thanks
Daniel
On Jul 24, 2006, at 8:30 AM, Tamouh H. wrote:
Hey,
I have a couple Adaptec 2410SA Raid cards (aac driver) and I was
wondering if anyone has had any luck with being able to hotswap
drives in FreeBSD 6?
If the Adaptec card is no good for hot swapping under FreeBSD,
what's the recommended brand?
Dave wrote:
Hello,
Thanks for your suggestion. I've tried cvsup1 through cvsup9 and let it
try to connect upwards of nearly half an hour, i think this issue has
something to do with my boxes, but i don't know what. They can contact the
various cvsup servers, but everytime they always
You can use sysutils/fastest_cvsup. Run it like that:
fastest_cvsup -c all
and get the list of fastest cvsup servers for your computer location.
2006/7/24, Dave [EMAIL PROTECTED]:
Hello,
Thanks for your suggestion. I've tried cvsup1 through cvsup9 and let it
try to connect upwards of
That is pretty small. At the bare minimum level, you might be
able to get it up and running, but not be able to do much of any
real work on it without more memory.
You didn't mention the amount of disk on the machine, but if you want
to run X (needed for a Gui) then it will take more that a
On 7/24/06, Grant [EMAIL PROTECTED] wrote:
Hi,
I'm trying to do this.
i want postfix to accept ANY mail sent to example1.com like a catch
all then any mail that it gets i want it to just bounce it on to
[EMAIL PROTECTED] which is hosted on another server.
So far i can only get postfix to
In the last episode (Jul 24), Roberto Nunnari said:
Hi everybody.
Could anybody tell me the reason why by default FreeBSD
limits the number of groups a user can be member of to 16?
Compatibility with the NFS protocol. A google search on nfs 16
groups returned a lot of hits.
On 24 Jul 2006, at 15:55, jan gestre wrote:
On 7/24/06, Grant [EMAIL PROTECTED] wrote:
Hi,
I'm trying to do this.
i want postfix to accept ANY mail sent to example1.com like a catch
all then any mail that it gets i want it to just bounce it on to
[EMAIL PROTECTED] which is hosted on
On Jul 24, 2006, at 9:16 AM, Grant wrote:
i want postfix to accept ANY mail sent to example1.com like a catch
all then any mail that it gets i want it to just bounce it on to
[EMAIL PROTECTED] which is hosted on another server.
If you want to act as an MX secondary, see this section of
Thank you Dan.
I'll set up a test machine and try a kernel with the limit
set to 256.
Do you know if that change requires a build world or
a buildkernel is enough?
Best regards.
Dan Nelson wrote:
In the last episode (Jul 24), Roberto Nunnari said:
Hi everybody.
Could anybody tell me the
Forgive me if this question is stupid or has been answered before, more
than likely this info exists, but I'm not looking in the right place. I
work in a small corporation that is heavily dependent on web apps in
which I am the sole developer. Currently we're using ASP on Win2K with
SQL
Lowell Gilbert wrote:
Erik Nørgaard [EMAIL PROTECTED] writes:
I am trying to get things up working (FBSD 6.1-STABLE) on a VAIO FJ3S
notebook, but have trouble with some devices: cardbus, wireless network
and sound. And I haven't even tried looking at the built in camera,
memory card reader
On Sunday 23 July 2006 18:10, Tamouh H. wrote:
Beautiful! That did the trick.
adding to the kernel:
device ichsmb
device smb
device smbus
device intpm
and then installing mbmon from source fixed it!
out of curiosity and for the sake of
Ted,
On 24/07/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
All you have to do to see this is try booting FBSD 6 on a 80386
and compare it's performance to FBSD 3.X on a 386.
How are you going to do that, Ted? From the 6.0R release notes: Support for
80386 processors (the I386_CPU kernel
Erik Nørgaard [EMAIL PROTECTED] writes:
Lowell Gilbert wrote:
Erik Nørgaard [EMAIL PROTECTED] writes:
I am trying to get things up working (FBSD 6.1-STABLE) on a VAIO FJ3S
notebook, but have trouble with some devices: cardbus, wireless network
and sound. And I haven't even tried looking at
Bill Moran wrote:
I don't know enought about Dovecot in particular to say whether or not
the speed is _purely_ the result of caching (and being written in C).
But I can state a couple of reasons why the server-side cache helps.
Keep in mind that IMAP is specifically designed as a
Forgive me if this question is stupid or has been answered before, more than
likely this info exists, but I'm not looking in the right place. I work in a
I'd recommend searching the subversion mailing lists as well. It's been
covered, but it's not stupid :)
small corporation that is
On 7/24/2006 12:16 PM, Philip Hallstrom wrote:
Forgive me if this question is stupid or has been answered before,
more than likely this info exists, but I'm not looking in the right
place. I work in a
I'd recommend searching the subversion mailing lists as well. It's been
covered, but it's
On 7/24/06, Freminlins [EMAIL PROTECTED] wrote:
Ted,
On 24/07/06, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
All you have to do to see this is try booting FBSD 6 on a 80386
and compare it's performance to FBSD 3.X on a 386.
How are you going to do that, Ted? From the 6.0R release notes:
[EMAIL PROTECTED] writes:
Hi,
It is my first fbsd 6.1.
I migrate a system from fbsd 6.0 to 6.1.
I have a script postgresql.sh in /usr/local/etc/rc.d.
It is executible.
Also it is working on 6.0 at startup.
But it do not runs in fbsd 6.1.
If I try
Hi David,
David Stanford wrote:
Now it appears to be working correctly and responding to queries, however
I'm noticing I continue to get that same error when I add my CNAME entry:
=
@ IN CNAMEwww.example.org.
=
write:
www IN CNAME example.org.
On 7/24/06, Freminlins [EMAIL PROTECTED] wrote:
Nikolas,
On 24/07/06, Nikolas Britton [EMAIL PROTECTED] wrote:
This would be like running Windows 3.1 on a brand new Xeon 5100
dual-core CPU... sure it will run fast* but what the hell are you
going to do with it? Play solitaire?
You have
In the last episode (Jul 24), Roberto Nunnari said:
Thank you Dan.
I'll set up a test machine and try a kernel with the limit
set to 256.
Do you know if that change requires a build world or
a buildkernel is enough?
libc uses NGROUPS_MAX and NGROUPS, so a buildworld is recommended.
--
Ted Mittelstaedt wrote:
- Original Message -
From: Danial Thom [EMAIL PROTECTED]
To: Greg Barniskis [EMAIL PROTECTED]; Nick Withers
[EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED];
freebsd-questions@freebsd.org
Sent: Thursday, July 13, 2006 11:10 AM
Subject: Re: Are hardware
At this point you can manage your files on your workstation and immediately
check your results.
Then when happy, you can commit your changes with SVN and they get
committed to the repository.
You don't need subversion to move files into your web tree. That's not
what it does.
Fair
On a side note, I found Outlook 2003 really shoddy/poor at working with IMAP
based systems, esp when you have lots of rules to run and lots of emails to
download first thing in the morning.
eg would easily 10 minutes to synchonise, whereas thunderbird takes about 10
seconds!
So from now I say
On 7/22/06, Jonathan Horne [EMAIL PROTECTED] wrote:
anyone know of good picture management application that can be found within
ports, to manage and organize pics that i upload?
right now, my management system is to:
1) open my folder on my local KDE workstation. create image gallery using the
Why would you need to be root? Here's what we do at work:
Because /usr/local/www/apache22/data is owned by root. I guess I
mistakenly figured that this is where the files should go. I know that
you can configure Apache to point to any directory, but was unsure of
the consequences of
Why would you need to be root? Here's what we do at work:
Because /usr/local/www/apache22/data is owned by root. I guess I mistakenly
figured that this is where the files should go. I know that you can
configure Apache to point to any directory, but was unsure of the
consequences of
Hi,
I've just wanted to tell you, that I've solved the problem by not
letting the script run under control of the daemon tools but via a
self written perl script.
Now, the problem not being able to access TTY no longer exists.
Bye,
S.Wagler
S. Wagler wrote:
Hi,
I'm currently using
Regarding: postfixadmin
I cannot seem to get the program to start using the default installation.
What I mean is, I inserted this into the httpd.conf file as directed by
the installation script:
Directory /usr/local/www/postfixadmin
Options Indexes
AllowOverride AuthConfig
/Directory
Ted Mittelstaedt wrote:
- Original Message -
From: Danial Thom [EMAIL PROTECTED]
To: Greg Barniskis [EMAIL PROTECTED]; Nick Withers
[EMAIL PROTECTED]
On 7/24/06, Matthias Fechner [EMAIL PROTECTED] wrote:
Hi David,
David Stanford wrote:
Now it appears to be working correctly and responding to queries,
however
I'm noticing I continue to get that same error when I add my CNAME
entry:
=
@ IN CNAMEwww.example.org.
I'm attempting to use tar to feed my filesystem(s) to a DLT tape
drive. I've done this with FreeBSD 3 through 5 and DAT (DDS-3 and
DDS-4) tapes for years. The command now appears to work for a while
and then dies with this message about 2.5 hours into the process:
Check your /etc/nsswitch.conf file. You want the line for hosts to be:
dns files
Also be sure named is running. While it says it is starting do a:
ps -ax|grep name
-Derek
At 04:53 PM 7/24/2006, David Stanford wrote:
On 7/24/06, Matthias Fechner [EMAIL PROTECTED] wrote:
Hi David,
On 7/24/06, Derek Ragona [EMAIL PROTECTED] wrote:
Check your /etc/nsswitch.conf file. You want the line for hosts to be:
dns files
Also be sure named is running. While it says it is starting do a:
ps -ax|grep name
-Derek
Derek,
nsswitch.conf hasn't been modified from the
Jaime wrote:
I'm attempting to use tar to feed my filesystem(s) to a DLT tape
drive. I've done this with FreeBSD 3 through 5 and DAT (DDS-3 and
DDS-4) tapes for years. The command now appears to work for a while and
then dies with this message about 2.5 hours into the process:
Hello gurus,
Please, Please! if someone can help me, how to setup any an accounts
system based on time
and auth
I'm On FreeBSD 6.1R its acting as a internet gateway for a comlex of 30
appartments.
the internet to this box is connected thro a dsl and its up/running,
Well, We want to
On Monday 24 July 2006 15:10, David Stanford wrote:
On 7/24/06, Derek Ragona [EMAIL PROTECTED] wrote:
Check your /etc/nsswitch.conf file. You want the line for hosts to be:
dns files
Also be sure named is running. While it says it is starting do a:
ps -ax|grep name
-Derek
I haven't tried gallery on FreeBSD, but I highly recommend it based on my
experience with it on Linux.
Mike
On Jul 22 at 18:07, Jeff Palmer wrote:
www/gallery
http://www.gallery.org
- Original Message -
From: Jonathan Horne [EMAIL PROTECTED]
To: freebsd-questions@freebsd.org
Hi
During installation of GNAT from ports I get the following error:
gmake[2]: Entering directory `/usr/ports/lang/gnat/work/gcc-34/gcc/fixinc'
/bin/csh ./genfixes machname.h
SHELL=/bin/sh: Command not found.
export: Command not found.
if: Expression Syntax.
gmake[2]: *** [machname.h] Error 1
Date: Sat, 22 Jul 2006 16:20:59 -0500
From: Jonathan Horne [EMAIL PROTECTED]
Subject: im about to sit down an read the entire postfix manuals...
To: freebsd-questions@freebsd.org
becuase i want to know if it supports a specific feature or not. so before i
do and spend all that time, i
Nikolas,
On 24/07/06, Nikolas Britton [EMAIL PROTECTED] wrote:
This would be like running Windows 3.1 on a brand new Xeon 5100
dual-core CPU... sure it will run fast* but what the hell are you
going to do with it? Play solitaire?
You have this the wrong way round. The correct allusion
i am troubleshooting an application and am having a hell of a time with
it. with bsd 6.1 is there a way where i can dump all traffic coming
over the nic to a log file so i can see exactly what is coming in?
thanks
___
freebsd-questions@freebsd.org
On 7/25/06, Greg Barniskis [EMAIL PROTECTED] wrote:
Ted Mittelstaedt wrote:
- Original Message -
From: Danial Thom [EMAIL PROTECTED]
To: Greg Barniskis [EMAIL PROTECTED]; Nick Withers
[EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED];
freebsd-questions@freebsd.org
Sent:
On Mon, Jul 24, 2006 at 03:20:32PM -0400, Steel City Phantom wrote:
i am troubleshooting an application and am having a hell of a time with
it. with bsd 6.1 is there a way where i can dump all traffic coming
over the nic to a log file so i can see exactly what is coming in?
tcpdump works
I have a server that has been inoperative for the last few months
(FreeBSD 6.0). I decided to turn on the system and it goes right to a
boot prompt. So I downloaded FreeSBIE and am trying to mount the old
drive to see if there is any data on the drive worth saving. When I
try to
On Jul 24, 2006, at 7:24 PM, Micah wrote:
I had the same problem recently and Google told me to look for
files with malformed dates. I used find to search for files dated
before Jan 1, 1970, and found one dated 1901. As soon as I
touched the problematic file, tar worked.
Many thanks.
Jaime wrote:
On Jul 24, 2006, at 7:24 PM, Micah wrote:
I had the same problem recently and Google told me to look for files
with malformed dates. I used find to search for files dated before
Jan 1, 1970, and found one dated 1901. As soon as I touched the
problematic file, tar worked.
I manage an Internet Provider with decentralized pop3/imap servers,
that receive all incoming mail in one server and redistributes using
virtusertable. We manage 4000 emails accounts.
Easy to configure and test. Works great for us.
[]´s!
--
Rafael Mentz Aquino
BSDServer Ltda.
51 - 9847 8825
One way to do that is to redirect the client/connection to a webpage
that asks for a user and password, which when validated inserts
the client IP address / mac address as a dynamic rule in the firewall
and some parallel control using crontab (or custom way) to delete the rule
after an amount
Martin Hudec wrote:
You can give dovecot a try now :), I use it on all mailservers in
production environments. It handles my ~54k mails in my mail account
pretty well (only slowdown is detected if I use gprs connection ~56kbits).
One good thing that counts in for dovecot is that postfix in
Martin Hepworth wrote:
On a side note, I found Outlook 2003 really shoddy/poor at working with IMAP
based systems, esp when you have lots of rules to run and lots of emails to
download first thing in the morning.
eg would easily 10 minutes to synchonise, whereas thunderbird takes about 10
Hello...i'm a newbie here. I want to use my Nokia 3105 as a modem to
create PPP connection to my ISP. Please anyone who knows how to setup
that device tell me... thx before
On Linux usually we link the device to something like /dev/modem.
I didn't know anything how to do that on FreeBSD. I'm
Matthias Fechner wrote:
Hi David,
David Stanford wrote:
Now it appears to be working correctly and responding to queries, however
I'm noticing I continue to get that same error when I add my CNAME entry:
=
@ IN CNAMEwww.example.org.
=
write:
www IN
Hello,
I'm trying to update a box from 6.0-p6 or 7 can't remember for sure
which to 6.1-RELEASE. I've downloaded the source, done make buildworld, make
buildkernel with a generic kernel, make installkernel, rebooted, done
mergemaster -p then gone cd /usr/src and done make installworld, all
David Stanford wrote:
I've tried everyone's suggestions to no avail. Here's my actual
configuration:
[EMAIL PROTECTED] ~]# /etc/rc.d/named stop
Stopping named.
[EMAIL PROTECTED] ~]# tail -12 /etc/namedb/named.conf
I can't stop mine and then start it again (running in chrooted mode). I do:
Mikhail Goriachev wrote:
David Stanford wrote:
I've tried everyone's suggestions to no avail. Here's my actual
configuration:
[EMAIL PROTECTED] ~]# /etc/rc.d/named stop
Stopping named.
[EMAIL PROTECTED] ~]# tail -12 /etc/namedb/named.conf
I can't stop mine and then start it again
Thanks for the answer.
I think I do not need to use mergemaster.
It is a brand new install of FreeBSD 6.1.
I only copy all my scripts from /usr/local/etc/rc.d/.
For example the postgresql install is NOT from ports.
I instaaled it from source ( I did it many times on 5.1, 5.4
and 6.0 ).
I expect
88 matches
Mail list logo