I'm running i386 5.2-CURRENT and using the axe driver to run a Netgear
FA120 USB ethernet adapter.
5.2-CURRENT FreeBSD 5.2-CURRENT #0: Tue May 18 16:11:06 PDT 2004
It works great. I even figured out how to run usbd and modify usbd.conf
to run ifconfig automatically to give it an ip address when
I'm running FreeBSD 5.2.1 with X11 (KDE) and just did a "make install
distclean" for the limewire port in console.
Afterward, I typed "exit" to drop down from root to my local account. Then I
typed, "limewire" and got this:
bash-2.05b$ limewire
Segmentation fault
bash-2.05b$
Any ideas/suggesti
Nicholas Bernstein wrote:
hello all,
I'm hoping someone can give me a hand with this. I have a suspicion as
to what is causing this, but I don't want to "taint" any replies I get.
If any of knowledgeable folks out there could help me out, offer
possible areas to look into, better places to contact,
Constantine wrote:
Hello,
I am very concerned about the security of my servers. My favourite
file-management software does not support any other unix standards than
plain ftp.
How is it possible to set up my FreeBSD 5.2.1 that way, that it will
accept ftp connections only from itself, so that i
On Thu, May 20, 2004 at 05:36:31PM +0900, Charlie Root wrote:
> On Thu, May 20, 2004 at 01:42:00AM -0500, Dan Nelson wrote:
> > In the last episode (May 20), Till Plewe said:
> > > My problem is essentially that freeing large numbers of small chunks
> > > of memory can be very slow. I have run into
[EMAIL PROTECTED] wrote:
I'm running i386 5.2-CURRENT and using the axe driver to run a Netgear
FA120 USB ethernet adapter.
5.2-CURRENT FreeBSD 5.2-CURRENT #0: Tue May 18 16:11:06 PDT 2004
The problem is that no matter what I try, every time I try to shut down
the system, if this device is plugged
On Thu, May 20, 2004 at 09:28:12AM -0400, Chuck Swiger wrote:
> Till Plewe wrote:
> >My problem is essentially that freeing large numbers of small chunks
> >of memory can be very slow. I have run into this problem twice so far.
> [ ... ]
> >One solution would be to divide the memory in larger regio
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I've been using pppd on my 5.2 system. I setup a script to run ntpdate and a
couple of oher things when I connect to my ISP in /etc/ppp/auth-up, but it
doesn't appear to run.
Just in case it was a timing problem I added a sleep 20 line, but that
Since upgrading from 4.5-RELEASE to 4.8-RELEASE (actually rebuilding the
system and mounting the old /home directory), I'm having problems with a
process which rebuilds a search engine index. Everything runs fine from
the command line, but the same script fails when running from cron.
The /bin/s
Andrea Venturoli wrote:
** Reply to note from Joan Picanyol i Puig <[EMAIL PROTECTED]> Wed, 19 May 2004
19:50:11 +0200
Everything works fine, but not after a reboot.
After the machine is powered up PDF creation will silently fail.
"sh /usr/local/etc/rc.d/samba.sh stop ; sh /usr/local/etc/rc.d/s
Forrest Aldrich wrote:
Hi there,
I'm interested in what motherboards most recommend now for higher
performance FreeBSD 4.x and 5.x systems. I've a SOYO Dragon Platinum,
with SATA and have had several problems, such that I will replace it
with something better -- perhaps ASUS?
Feedback appreci
** Reply to note from Pavel Duda <[EMAIL PROTECTED]> Fri, 21 May 2004 10:51:20 +0200
> I've found it. Problem is PATH variable. Try to add
> PATH=/bin:/sbin:/usr/local/bin:... etc. to your samba pdf printing
> script. It works for me.
Thank you very much, I'm giving it a try!
bye
a
Hi,
I have played something with 'boot0cfg' like '# boot0cfg -s 2 -B /dev/ad0'.
When I reboot my system it failed to be booted.
I have the following diskmap.
'/ for ad0s2a'
How do I recover the BootEasy?
Thanks,
Soo-Hyun
___
[EMAIL PROTECTED] maili
On Thu, May 20, 2004 at 07:54:59PM -0400, Miles Lubin wrote:
> All the ups ports seem to be only for APC UPSs, but I have a Belkin
> F6C120-UNV connected over usb (it is recognized as uhid0 when
> connected). Serial would be ok, but I don't see any ports that would
> work for that either. On Belkin
I can't install 4.X on a couple of identical new machines. They both
exhibit the same problem, and it's consistant, so it's probably not
bad hardware, though perhaps weird hardware. Also, 5.2 does install,
but these are to be production machines at a remote location so I'd
really rather be running
On Fri, 21 May 2004 11:57:07 +0100 (BST)
Richard Caley <[EMAIL PROTECTED]> wrote:
> And then nothing for as close to forever as I have been prepared to
> wait.
>
> The motherboard is an ASRock KS41
>
> Chipset:SIS 741 + SIS 963L
>
> Athalon 2400+
>
>
> Can't th
Hello list,
I'm setting up a BIND/DNS server (recursive) and I'm facing a problem when I
try to start the "named" automatically on boot (named_enable="YES" in
rc.conf):
First I noticed that the boot process takes a very long time in the
"Starting Standard Daemons" phase.
After boot I have loo
> > -Original Message-
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] Behalf Of Muhammad Reza
> > I running named in sandbox as a secondary name server with
> > FreeBSD-5.1.p17,
> > Named log always complain:
> > named-xfer exited with signal 6 and slave zone expired for every
Hi folks,
FreeBSD 5.2
===
I tried to install and run IPFILTER but met with
following problems;
# which ipfilter
ipfilter: Command not found.
# whereis ipfilter
ipfilter: /usr/src/contrib/ipfilter
# ls /usr/share/examples/ | grep ipfilter
ipfilter
# pkg_info | grep -i ipfilter
No printo
Hi!
I have received no messages at all from freebsd-questions, or one or two
of the other FreeBSD mailing lists, for about 2 days. Do you know if
there is a problem at their end, or has perhaps my ISP decided they are
all spam?
___
[EMAIL PROTECTED]
On Fri, May 21, 2004 at 06:49:38AM +, [EMAIL PROTECTED] wrote:
> Synopsis:I am pursuing this direction and these goals but have no knowledge
> of the path befor me I have been working with BSD at home know for about two months
> and still do not have a working cd rom , but my knowledg
On Fri, 2004-05-21 at 13:16, Matthew Seaman wrote:
> However, remember that's written netbsd-centrically, and you'll have
> to adapt the instructions for use under FreeBSD -- use ports instead
> of pkgsrc, and you'll need to investigate what to do to make devfs(8)
> create the requited device node
Esta cuenta de correo no esta operativa. Si desea ponerse en contacto con nosotros,
escribanos a <[EMAIL PROTECTED]>
Cordialmente,
CJ
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
On Fri, May 21, 2004 at 12:07:25PM +0100, Nuno César Pires wrote:
> I'm setting up a BIND/DNS server (recursive) and I'm facing a problem when I
> try to start the "named" automatically on boot (named_enable="YES" in
> rc.conf):
>
> First I noticed that the boot process takes a very long time in
On Fri, May 21, 2004 at 07:41:08AM -0400, Mike Jeays wrote:
> Hi!
>
> I have received no messages at all from freebsd-questions, or one or two
> of the other FreeBSD mailing lists, for about 2 days. Do you know if
> there is a problem at their end, or has perhaps my ISP decided they are
> all spa
Hallo Gary Kline,
> I've just installed the mail/antivirus-milter; it looks
> promising--to get rid of those annoying *zip, *pif, &c
> spams. But this port also installs its own version of
> sendmail. I just upgraded to the latest 4.8 and assume
> that my sendmail
On Fri, May 21, 2004 at 07:41:08AM -0400, Mike Jeays wrote:
> I have received no messages at all from freebsd-questions, or one or two
> of the other FreeBSD mailing lists, for about 2 days. Do you know if
> there is a problem at their end, or has perhaps my ISP decided they are
> all spam?
Well
Hi there,
I have installed and used postfix many a time with minimal fuss, but this
time for some reasona all of my mail just gets stuck:
hitbox# mailq
-Queue ID- --Size-- Arrival Time -Sender/Recipient---
E76C639821* 331 Fri May 21 13:20:15 [EMAIL PROTECTED]
Hi,
I am trying to put a new disk on my system. I read the description of
the process in FreeBSD Unleashed and apparently I misunderstood it,
because I ended up installing a boot manager on the new disk. Now I can
not mount it - I get error messages like:
# mount /dev/ad1e /mnt/backup
operation
my computer has ethernet internet connection. i use
linksys lan card. if i reinstall system i have to
reinstall the lan software. but it says its designed
for windows only. and i want to remove windows because
1 it has virus, 2 it has only total of 2 gb. and i
relly really liked freebsd screenshots
On Fri, May 21, 2004 at 01:26:26PM +0100, Edd wrote:
>
> Hi there,
> I have installed and used postfix many a time with minimal fuss, but this
> time for some reasona all of my mail just gets stuck:
>
> hitbox# mailq
> -Queue ID- --Size-- Arrival Time -Sender/Recipient---
> E76C639821
On Fri, 21 May 2004 13:26:26 +0100
Edd <[EMAIL PROTECTED]> wrote:
>
> Hi there,
> I have installed and used postfix many a time with minimal fuss, but this
> time for some reasona all of my mail just gets stuck:
>
> hitbox# mailq
> -Queue ID- --Size-- Arrival Time -Sender/Recipient--
On Fri, May 21, 2004 at 07:36:11AM -0500, Jason Dusek wrote:
> I am trying to put a new disk on my system. I read the description of
> the process in FreeBSD Unleashed and apparently I misunderstood it,
> because I ended up installing a boot manager on the new disk. Now I can
> not mount it - I
Hi there
I'm about to make a decision on which motherboard to buy to run FreeBSD
4.9 in a production environment, and I'm getting a little confused over
compatibility issues with the available chipsets and this version of
FreeBSD.
The chipsets in question are: Intel 865G, 865PG, 865PE.
I did
> > The motherboard is an ASRock KS41
> > Chipset:SIS 741 + SIS 963L
> > Athalon 2400+
> HDD model and firmware version would be useful.
The HDD is a maxtor 6Y080P0 The BIOS is AMI and identifies itself as
K7S41 P1.10.
As a matter of interest, I have had a very si
Praneeth Reddy wrote:
my computer has ethernet internet connection. i use
linksys lan card. if i reinstall system i have to
reinstall the lan software. but it says its designed
for windows only. and i want to remove windows because
1 it has virus, 2 it has only total of 2 gb. and i
relly really lik
I have only used FreeBSD on one Asus board, the original A7A266. I've
recently begun the undertaking of putting 5.2.1 on it. I had to disable the
"Use PNP OS" function in the BIOS to make it work reliably - in other words,
I'm making the BIOS assign device resources. The same is true for 4.8 and
On Fri, 21 May 2004 14:20:42 +0100 (BST)
Richard Caley <[EMAIL PROTECTED]> wrote:
> > > The motherboard is an ASRock KS41
> > > Chipset:SIS 741 + SIS 963L
> > > Athalon 2400+
>
> > HDD model and firmware version would be useful.
>
> The HDD is a maxtor 6Y080P0 The
> Did you tried with another HDD ? Does the HDD work on another mobo ?
Don't really want to mess with the hardware too much. These are
supposed to be identical machines to deliver quickly to a customer as
a stop-gap. I'll try with a spare HD this evening, but basicly I just
want to get something g
--- Bill Moran <[EMAIL PROTECTED]> wrote:
> What you did was install the system crontab as a user. Log in as the
> user you executed "crontab crontab" as, and enter "crontab -r". That
> will remove the crontab for that user.
>
> On a related note. I'm going to make some changes to that section
Hi,
I have a lot of files in my computer that i wanted
to share with my friends remotely via ftp server. I'm
currently using freebsd 4.9 and I've been repeatedly
scanning through the handbook but I cant seem to find
the portion about setting up an ftp server. Did I miss
something in the handbook
On Fri, 21 May 2004 15:16:56 +0100 (BST)
Richard Caley <[EMAIL PROTECTED]> wrote:
> > Did you tried with another HDD ? Does the HDD work on another mobo ?
>
> Don't really want to mess with the hardware too much. These are
> supposed to be identical machines to deliver quickly to a customer as
>
Mark:
Edit /etc/inetd.conf and comment out the FTP line. Then 'killall -HUP inetd'
to restart. You should then be able to ftp to your machine. You should 'man
ftpd' for further details on configuring ftp.
Cheers,
Barry
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL P
Hello again,
I was trying to compile ardour (manually (no port)), I have jack
installed using portaudio. Whilst doing configure, ardour asks for POSIX
threading and fails! surely FreeBSD has this feature. if not, which
thread lib do you suggest (there are many in devel).
Thanks!
_
>
> my computer has ethernet internet connection. i use
> linksys lan card. if i reinstall system i have to
> reinstall the lan software. but it says its designed
> for windows only. and i want to remove windows because
> 1 it has virus, 2 it has only total of 2 gb. and i
> relly really liked free
Hi everybody.
FreeBSD 4.10-PRERELEASE #0
Just installed MIMEDefang+SpamAssassin+ClamAV on my mailserver,
and everything is running fine but don't seem to get spamfiltering on " * "
to work with KMail.
My filter looks like this : X-Spam-Score contains *Action: File in
folder Spam
Tried d
Hi all,
I've been asked to spec out a server designed to pull and store off-site
backups from ~60 sites (primary function). The intention is to run
FreeBSD on it, although at this point in time we're still deciding
whether or not to run -stable (4.x) or -current (5.x) on it; I have a
feeling th
On Friday 21 May 2004 22:26, Matthew Seaman wrote:
> On Fri, May 21, 2004 at 07:36:11AM -0500, Jason Dusek wrote:
> > I am trying to put a new disk on my system. I read the description of
> > the process in FreeBSD Unleashed and apparently I misunderstood it,
> > because I ended up installing a boo
hi all,
I want to move my home directory to a gbde encrypted partition.
I plan to have only the default dotfiles in /home/xxx (before mounting
the encrypted partition), log in as usual, attach and fsck the
encrypted partion and then mount it 'over' /home/xxx.
Is there anything wrong with this a
I have a 4.6 Server running SAMBA for a small office. I recently added a
second SCSI Hard drive to the ADAPTEC 29160 Controller Card. Now after the machine
has been in use for more than a few minutes. The server start repeating the follow
lines on the screen.
a
hi folks
as i have a child that thinks of dvds as occasional Frisbees\drink mats
and throwing stars ive taken to giving him back-ups as of my shop bought
dvds
this is my prob : the only reason i have a windows partition is to run a
nice freeware apt called dvd shrink ive tried running it under w
On Fri, May 21, 2004 at 02:12:25PM +0100, Justin Finkelstein wrote:
> Hi there
>
> I'm about to make a decision on which motherboard to buy to run FreeBSD
> 4.9 in a production environment, and I'm getting a little confused over
> compatibility issues with the available chipsets and this version
Check the questions archives, this was just answered within the last
2 weeks.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Stephen Liu
Sent: Friday, May 21, 2004 7:35 AM
To: [EMAIL PROTECTED]
Subject: Install IPFILTER question
Hi folks,
FreeBSD 5.2
=
On Thu, May 20, 2004 at 10:44:14AM -0500, Eric Anderson wrote:
> >
>
> That's good to hear. Did you do any other tweaks? sysctl settings?
> mbufs?
net.inet.udp.recvspace=524288
kern.ipc.maxsockbuf=1048576
net.inet.icmp.drop_redirect=1
net.inet.icmp.log_redirect=1
Telus-nfs1:# w
12:41PM up
For some months I've had increasing troubles with my
4.9/4.10 abruptly crashing. This morning I found my
workhorse server, tao, down and hung up while trying to
fsck /usr. I cleaned everything thoroughly and then
started xdm. The grey screen showed, the m
On Fri, May 21, 2004 at 07:41:08AM -0400, Mike Jeays wrote:
> Hi!
>
> I have received no messages at all from freebsd-questions, or one or two
> of the other FreeBSD mailing lists, for about 2 days. Do you know if
> there is a problem at their end, or has perhaps my ISP decided they are
> all spa
FreeBSD 4.9-STABLE
pure-ftpd version 1.0.18
I am trying to configure pure-ftpd with both Unix authentication and PureDB
authentication. I am going to use the server with complete TLS/SSL mechanisms
only - and refuse cleartext authentication.
(TLS 2)
at the moment - pure-ftpd only authenticat
Steve Shorter wrote:
Thanks - any help/hints is appreciated.
Disk design issues matter cause it is the ultimate
bottleneck. RAID is you friend.
Just curious - what RAID level/configuration do you use? I've typically
used RAID5, but RAID0+1 might be acceptable.
Eric
--
I am running bind 9.x on my primary and secondary servers. Since both are
on the same C class subnet I have used a free DNS hosting to be a
secondary for my site.. I am trying to added NS and A name records to the
2 name servers but I recieve errors when I restart/reload bind. Here is
my mydomai
Gary Kline wrote:
For some months I've had increasing troubles with my
4.9/4.10 abruptly crashing. This morning I found my
workhorse server, tao, down and hung up while trying to
fsck /usr. I cleaned everything thoroughly and then
started xdm. The grey screen showed, the mouse was frozen;
On Fri, May 21, 2004 at 08:20:04PM +1200, Andrew McNaughton wrote:
>
> Since upgrading from 4.5-RELEASE to 4.8-RELEASE (actually rebuilding the
> system and mounting the old /home directory), I'm having problems with a
> process which rebuilds a search engine index. Everything runs fine from
> th
On Fri, May 21, 2004 at 01:06:41PM -0500, Eric Anderson wrote:
> >
> > Disk design issues matter cause it is the ultimate
> >bottleneck. RAID is you friend.
> >
>
> Just curious - what RAID level/configuration do you use? I've typically
> used RAID5, but RAID0+1 might be acceptable.
>
Hello,
I've got an Epson printer I've set up with CUPS. Unfortunatley it came out,
that the program CUPS uses internally (rastertoprinter) gets some kind of
lockup right after ending the page - it starts to eat up 100% CPU; CUPS gets
the message "Page finished", but the job stays there - and the p
>> I'm running i386 5.2-CURRENT and using the axe driver to run a Netgear
>> FA120 USB ethernet adapter.
>> 5.2-CURRENT FreeBSD 5.2-CURRENT #0: Tue May 18 16:11:06 PDT 2004
>>
>> The problem is that no matter what I try, every time I try to shut down
>> the system, if this device is plugged in, the
sorry if this quistion has allread been asked and awnsered..
i got noticeing that my system was runnung out of mem so i did top and this is what i
found
PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND
9936 dave -22 0 219M 98M RUN 16:03 46.04% 46.04% netscape-bin
15211 dave 31 0 205
Greetings,
I have 5.1-release installed. I installed qmail from the ports.
Anybody use ldap with qmail ? Tried following along with
lifewithqmail-ldap pages, but couldn't find schema, etc.
Anyway, any help greatly appreciated.
-Darryl
___
[EMAIL PRO
On Fri, May 21, 2004 at 11:18:49AM -0700, [EMAIL PROTECTED] wrote:
> I am running bind 9.x on my primary and secondary servers. Since both are
> on the same C class subnet I have used a free DNS hosting to be a
> secondary for my site.. I am trying to added NS and A name records to the
> 2 name s
On Fri, May 21, 2004 at 12:38:49PM -0700, whitevamp wrote:
> sorry if this quistion has allread been asked and awnsered..
>
> i got noticeing that my system was runnung out of mem so i did top and this is what
> i found
>
> PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND
>
> 9936 da
Bit late i know but
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=45001&item=5701027269&rd=1
works well for me in use as an access point (using it right now while
writing this write.) hope the url comes out ok as its a bit long.
Vince
On Fri, 14 May 2004, sAndri Kok wrote:
> Hi guys,
>
I got an old machine from a garage sale a couple months ago and have been
unable to install any operating system on it. Mainly with errors like
isolinux: spec packet failed to locate cd rom device. And with FreeBSD 5.1 i
got:
Building the boot loader arguments:
Read Error: 0x01
Could not find P
On Fri, May 21, 2004 at 02:22:46PM -0400, Bill Moran wrote:
> Gary Kline wrote:
> > For some months I've had increasing troubles with my
> > 4.9/4.10 abruptly crashing. This morning I found my
> > workhorse server, tao, down and hung up while trying to
> > fsck /usr. I cleaned ev
i did a cvsup then whent to install this port /usr/ports/textproc/glimpse
now its saying this
make install clean
===> Vulnerability check disabled
glimpse-4.13.1.tar.gz doesn't seem to exist in /usr/ports/distfiles/.
Attempting to fetch from ftp://ftp.polito.it/pub/tools/unix/harvest/.
fetch: ftp:
On Fri, May 21, 2004 at 10:50:46AM -0700, Gary Kline wrote:
> For some months I've had increasing troubles with my
> 4.9/4.10 abruptly crashing. This morning I found my
> workhorse server, tao, down and hung up while trying to
> fsck /usr. I cleaned everything thoroughly
Michal Pasternak [Fri, May 21, 2004 at 08:38:41PM +0200]:
> Hello,
>
> I've got an Epson printer I've set up with CUPS. Unfortunatley it came out,
> that the program CUPS uses internally (rastertoprinter) gets some kind of
> lockup right after ending the page - it starts to eat up 100% CPU; CUPS g
On Fri, May 21, 2004 at 02:40:58PM -0600, Nathan Kinkade wrote:
> On Fri, May 21, 2004 at 10:50:46AM -0700, Gary Kline wrote:
> > For some months I've had increasing troubles with my
> > 4.9/4.10 abruptly crashing. This morning I found my
> > workhorse server, tao, down and hung up wh
On Fri, 21 May 2004 15:31:57 +0100
"Barry Byrne" <[EMAIL PROTECTED]> wrote:
> > -Original Message-
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of
> > Mark Jayson Alvarez
> > Sent: 21 May 2004 15:23
> > To: [EMAIL PROTECTED]
> > Subject: Help: Setting up FTP server
On Thu, 20 May 2004, Martin Phillips wrote:
> I am trying to install FreeBSD on an old laptop that used to run various
> versions of Windows. I have two problems...
>
> 1. The installation process appears not to see my PCMCIA cards. Running
> pccardd says "No PC-CARD slots". That's a shame re
On Fri, May 21, 2004 at 01:09:03PM +1000, Norberto Meijome wrote:
> I'm plan to disable atime updates in some Web + MySQL servers (to get a
> bit more performance, even if insignificant).
>
> Is there any OS, Apache or MySQL feature that would be affected by
> setting noatime in fstab? ( I coul
Nicholas Bernstein wrote:
On Fri, 2004-05-21 at 00:06, Jorn Argelo wrote:
Nicholas Bernstein wrote:
:: snip ::
I wonder ... why do want to run CURRENT on a machine like that? It's the
bleeding edge source code, which is unstable most of the times. You
might want to consider running
Hello,
on my machine (config as in Subject:) printing with CUPS caused the command
"rastertoprinter" to eat up 100% of CPU after finishing all the pages from a
given task.
I've found the possible bug and posted it, with a fix, on CUPS site:
http://www.cups.org/str.php?L723+P0+S-2+C0+I0+E
Greetings:
My server is: FreeBSD 4.9 stable and is acting as a file and (hopefully)
print server for 6 local Windows 2000 workstations.
Samba 2.28 is installed and serving file shares properly. Now for
printer sharing...
The printer is an HP 4M laserjet, and I installed apsfilter (via ports)
A
On Fri, May 21, 2004 at 01:51:02PM -0700, Gary Kline wrote:
> On Fri, May 21, 2004 at 02:40:58PM -0600, Nathan Kinkade wrote:
> > On Fri, May 21, 2004 at 10:50:46AM -0700, Gary Kline wrote:
> > > For some months I've had increasing troubles with my
> > > 4.9/4.10 abruptly crashing. This morni
On Fri, May 21, 2004 at 10:47:17PM +0200, Michal Pasternak wrote:
> Michal Pasternak [Fri, May 21, 2004 at 08:38:41PM +0200]:
> > Hello,
> >
> > I've got an Epson printer I've set up with CUPS. Unfortunatley it came out,
> > that the program CUPS uses internally (rastertoprinter) gets some kind of
Gary Kline wrote:
On Fri, May 21, 2004 at 02:22:46PM -0400, Bill Moran wrote:
Gary Kline wrote:
For some months I've had increasing troubles with my
4.9/4.10 abruptly crashing. This morning I found my
workhorse server, tao, down and hung up while trying to
fsck /usr. I cleaned everything tho
Hi, list(ners)
Problem nr 1.
I have read the following guide to install qmail:
http://www.stevenfettig.com/mythoughts/archives/cat_qmailhowto.php
I have not installed from source by my self, I found that all programs
where avalible thru ports. I will make this as sort as possible, I set
up vpopma
How can one detect if a system is using multiple CPUs?
I'm running freebsd 4.9 and I was hoping that either uname or top would
give some information as to whether or not the second cpu is being used.
dmegs outputs the following:
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CP
- Original Message -
From: "Nicholas Bernstein" <[EMAIL PROTECTED]>
To: "freebsd-questions" <[EMAIL PROTECTED]>
Sent: Friday, May 21, 2004 5:55 PM
Subject: Multiple CPUs
> How can one detect if a system is using multiple CPUs?
> I'm running freebsd 4.9 and I was hoping that either unam
Well, I dunno how, but X works. Using /stand/sysintall,
I created a new XF86Config using the script. I increased
the resolution to 1280x1024 just in case I ever got X
to boot.
I did clean a lot of crap out on /tmp; other than that,
this is one m
Hi,
i read the old doco from 2002 of the ppc project, and i know opendarwin. But
I don’t know exactly if
freebsd exists for powerpc or not. I have the pegasos ppc hardware
(HYPERLINK "http://www.pegasosppc.com/"http://www.pegasosppc.com) and like
to use it with freebsd
Can someone tell me
On Fri, 21 May 2004 11:56:07 +0100
Matthew Seaman <[EMAIL PROTECTED]> wrote:
> Try the sysutils/nut port: they claim to support exactly your model of
> UPS:
>
> http://eu1.networkupstools.org/compat/stable.html
>
> Cheers,
>
> Matthew
>
> --
> Dr Matthew J Seaman MA, D.Phil.
How to get the best results from FreeBSD questions.
===
Last update $Date: 2003/03/09 22:09:31 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that at
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception. Inev
On Fri, 21 May 2004 2:15 am, Kirk Strauser wrote:
> After seeing the results you got, I'm going to adopt that as my new
> .sig. Thanks for the tip!
>--
>Kirk Strauser
>i'm 16 by the way - sexy brittany spears
LOL Love it!
my new sig
Im 37 by the way - Sexy Aria Giovanni
Will only make people
On Fri, 21 May 2004 11:44:51 +0100, Soo-Hyun Choi wrote:
>>
> I have played something with 'boot0cfg' like '# boot0cfg -s 2 -B /dev/ad0'.
> When I reboot my system it failed to be booted.
>
> I have the following diskmap.
> '/ for ad0s2a'
>
> How do I recover the BootEasy?
>>
I don't see anything
On Sat, May 22, 2004 at 01:39:32AM +0200, Thomas May wrote:
> Hi,
>
>
>
> i read the old doco from 2002 of the ppc project, and i know opendarwin. But
> I don?t know exactly if
>
> freebsd exists for powerpc or not. I have the pegasos ppc hardware
> (HYPERLINK "http://www.pegasosppc.com/"http:
On Fri, 21 May 2004 19:35:01 +0800 (CST)
Stephen Liu <[EMAIL PROTECTED]> wrote:
> Hi folks,
>
> FreeBSD 5.2
> ===
>
> I tried to install and run IPFILTER but met with
> following problems;
>
> # which ipfilter
> ipfilter: Command not found.
>
> # whereis ipfilter
> ipfilter: /usr/src/co
Michal Pasternak wrote:
Mike [Fri, May 21, 2004 at 02:55:19PM -0700]:
PROBLEM: I'm able to "see" the printer from the Win2k client accoss the
network, Windows 2k prompts for a driver and I load the driver. Windows
reports that the printer is "ready", however when I try to print a test
page, noth
Has anyone had any luck getting a Sony Clie to sync with
gpilotd/pilot-link/jpilot/anything on FreeBSD?
I have had no success with USB syncing using uvisor, and limited success
using IrDA (/dev/cuaa1 on my IBM R40). Through IrDA, birda sees the
device. I cannot get any application to take adv
PROBLEM: Error Mounting CDROM
AT BOOT SYSTEM DISPLAYS: acd0: CDROMhttp://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
On Friday 21 May 2004 10:34 pm, [EMAIL PROTECTED] wrote:
> PROBLEM: Error Mounting CDROM
>
> AT BOOT SYSTEM DISPLAYS: acd0: CDROM
> THE COMMAND THAT I USED TO ACCESS IT WAS: mount /dev/acd0
> WHICH RETURNED: CD9660:/dev/acd0: Input/output error
>
> I checked /dev to insure that the device was ther
1 - 100 of 105 matches
Mail list logo