Hey guys,
I've got a problem I can't figure out. We do a lot of interconnect with wires
soldered into a single pad. We generally designate them as E?.
I cannot figure out how to relate the pad to the schematic. I've tried using the one
pin CON1 out of the library. I've tried naming a
maybe the pad of the E is not the same number as the pin of your
one pin
Dennis Saputelli
[EMAIL PROTECTED] wrote:
Hey guys,
I've got a problem I can't figure out. We do a lot of interconnect with wires
soldered into a single pad. We generally designate them as E?.
I cannot figure
]
Subject: [PEDA] Pads and single pin connectors.
Hey guys,
I've got a problem I can't figure out. We do a lot of
interconnect with wires soldered into a single pad. We
generally designate them as E?.
I cannot figure out how to relate the pad to the schematic.
I've tried using the one
At 03-03-2004 17:34, [EMAIL PROTECTED] wrote:
Hey guys,
I've got a problem I can't figure out. We do a lot of interconnect with
wires soldered into a single pad. We generally designate them as E?.
I cannot figure out how to relate the pad to the schematic. I've tried
using the one pin CON1
]
Subject: Re: [PEDA] Pads and single pin connectors.
maybe the pad of the E is not the same number as the pin of your
one pin
Dennis Saputelli
[EMAIL PROTECTED] wrote:
Hey guys,
I've got a problem I can't figure out. We do a lot of interconnect with wires
soldered into a single pad. We
Aha!
Thanx,
Michael
From: Tony Karavidas [EMAIL PROTECTED]
Date: 2004/03/03 Wed PM 12:44:44 EST
To: 'Protel EDA Forum' [EMAIL PROTECTED]
Subject: Re: [PEDA] Pads and single pin connectors.
I'm guessing your PCB object is a free pad???
I'm also guessing you don't have a PCB footprint defined
Okay, that seems to be part of the problem, but it raises another question. Does the
single pad in question have to be on the master schematic? I can get the pads on the
master to work, but the sub-drawings are still being difficult.
Thanx,
Michael Badillo
* * * * * * * * * * * * * * * *
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 03, 2004 1:02 PM
To: Protel EDA Forum
Subject: Re: [PEDA] Pads and single pin connectors.
Okay, that seems to be part of the problem, but it raises
another question. Does the single pad in question
GSM +44 [0]7831 373727
Email [EMAIL PROTECTED]
WWW http://www.rsd.tv
==
-Original Message-
From: Dennis Saputelli [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 10, 2003 4:52 PM
To: Protel EDA Forum
Subject: Re: [PEDA] PADS ?
we
we are about to embark on a large project for an outside customer
(second spin, one year in rev, 16 layers, yada yada)
we will be using 99SE and probably spectra
in talking with the manager (a very smart fellow BTW)
at our customer's place he said:
'I HATE Protel!' quite vigorously
i said Oh?
: Thursday, July 10, 2003 8:52 AM
To: Protel EDA Forum
Subject: Re: [PEDA] PADS ?
we are about to embark on a large project for an outside customer
(second spin, one year in rev, 16 layers, yada yada)
we will be using 99SE and probably spectra
in talking with the manager (a very smart
I don't know about PADS but Mentor Expedition does this very effectively.
- Original Message -
From: Dennis Saputelli [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Thursday, July 10, 2003 8:52 AM
Subject: Re: [PEDA] PADS ?
we are about to embark on a large project
Excellent test. See comments below...
-Original Message-
From: Ian Wilson [mailto:i.wilson;considered.com.au]
Sent: Thursday, October 17, 2002 11:48 PM
To: Protel EDA Forum
Subject: Re: [PEDA] Pads disappearing - DXP - Earlier Version - DXP
On 03:47 PM 18/10/2002 +1000, Igor
:27 PM
To: 'Protel EDA Forum'
Subject: Re: [PEDA] Pads disappearing - DXP - Earlier Version - DXP
What was REPORTED was something was created in DXP, someone else edited
in an 'older' version, and when it was brought back into DXP, the pads
were missing. My logic is sound. IF the problem is a bug
Greetings,
A colleague had this experience:
Created some components in DXP then sent the PCB document to a third party
using an earlier version (don't know which) and then returned the document
to DXP - the components he built in DXP had the pad sizes set to zero in x
and y - ie they were
then...
-Original Message-
From: Igor Gmitrovic [mailto:igmitrovic;hpm.com.au]
Sent: Thursday, October 17, 2002 10:47 PM
To: Protel EDA Forum
Subject: Re: [PEDA] Pads disappearing - DXP - Earlier Version - DXP
In my opinion you contradict yourself. The important thing
here
-eda.com.au]
Sent: Friday, 18 October 2002 10:32 AM
To: Protel EDA Forum
Subject: [PEDA] Pads disappearing - DXP - Earlier Version - DXP
Greetings,
A colleague had this experience:
Created some components in DXP then sent the PCB document to a third party
using an earlier version (don't know which
they could have certainly done something to overcome that
when importing into a new version of Protel.
Igor
-Original Message-
From: Tony Karavidas [mailto:tony;encoreelectronics.com]
Sent: Friday, 18 October 2002 11:34 AM
To: 'Protel EDA Forum'
Subject: Re: [PEDA] Pads disappearing - DXP
On 03:47 PM 18/10/2002 +1000, Igor Gmitrovic said:
In my opinion you contradict yourself. The important thing here is that
the known behaviour from the old versions of Protel is propagated to the
DXP in one way or the other.
Igor
I have now done some testing.
Started with a PCB file in DXP.
On 10:32 AM 18/10/2002 +1000, Brian Watson said:
Greetings,
A colleague had this experience:
Created some components in DXP then sent the PCB document to a third
party using an earlier version (don't know which)
Autotrax? Can you find out?
and then returned the document to DXP - the
]
Sent: Thursday, October 17, 2002 5:44 PM
To: Protel EDA Forum
Subject: Re: [PEDA] Pads disappearing - DXP - Earlier Version - DXP
Brian,
so it is still there. I have seen it in P3, P98 and P99 when
importing files from previous versions of Protel into the
latest version. DOS
Hello all
I have two very old PADS files dating back to 1996 not even sure what PADS
versions these are in , either Perform or Works. I only have PADS from
2.0 up which will not read these PADS job files. I need to get the ASCII
conversion for these files so that I can then read them into
Mike,
I've got PADS 5.0 If you want to email me the files I'll see what I can do.
Joe
- Original Message -
From: Michael Reagan (EDSI) [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Wednesday, October 09, 2002 5:33 PM
Subject: [PEDA] PADS conversion
Hello all
I have
I had the chance to get a demo on PADS 4.0 from a colleague of mine
who is using pads for more than a decade now.
There appear to be several modules to be purchased independently.
He said something about a 20k$ invesment and 3k$ per year.
It was interesting to see him place an additional
4:49 PM
To: Protel EDA Forum
Subject: Re: [PEDA] PADS translation error
Hi,
Is the import only a problem for PADS files?
I can't get it working with PCAD MD file either.
If I leave the layer mapping as it is, I get mainly
the traces, not the pads.
If I select the layer as I think they should
immediately by telephone (collect) at (1) 403.214.4400 and destroy this
e-mail as well as any copy. Thank you.
-Original Message-
From: Abd ulRahman Lomax [mailto:[EMAIL PROTECTED]]
Sent: Monday, April 22, 2002 4:07 PM
To: Protel EDA Forum
Subject: Re: [PEDA] PADS translation error
At 03:26 PM 4
Hi all,
I just tried to import a PADS ascii pcb and while some layers and fills
showed up, only two components came across. I received the following errors
in a report file.
-Protel Design System: PADS PowerPCB To Protel 99 SE Translator Report
-PCB ASCII File : rwc016
-Date :
-
From: [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Monday, April 22, 2002 3:26 PM
Subject: [PEDA] PADS translation error
Hi all,
I just tried to import a PADS ascii pcb and while some layers and fills
showed up, only two components came across. I received the following
errors
Lloyd,
I got the same thing when I tried to import my first and only PADS pcb...
I posted a similar question here, but no one seemed to know what to do
about it. I managed to get some gerbers instead from the company, so we
never did solve the problem.
Sorry I'm no help, but I just wanted to
The problem is that the translator can not import the files right. I
tried to import PADS files a long time ago, and ran into the same problem.
The only way I was able to import them was in PADS version 2.0 in ASCHII
format. Even then I had layer registration problems, Traces on the wrong
Hi,
Is the import only a problem for PADS files?
I can't get it working with PCAD MD file either.
If I leave the layer mapping as it is, I get mainly
the traces, not the pads.
If I select the layer as I think they should be,
Protel makes a real mess with the pads replacing them
from one part to
How do I specify a pad with a rectangular or square cutout? I'm using a
switch and a stereo phone jack that require rectangular and square mounting
holes respectively.
Sean James
PCB Designer
Telecast Fiber Systems
102 Grove Street
Worcester, MA 01603
TEL 508-754-4858 x33
FAX 413-541-6170
* *
Small cutouts like those in the pads you are describing are usually
restricted to slots or cutouts with a radius at each end or corner. This is
because they are usually created using spinning drill or router bits. There
are many ways to specify slots unfortunately none are as simple and
At 01:23 PM 27/02/02 -0500, you wrote:
How do I specify a pad with a rectangular or square cutout? I'm using a
switch and a stereo phone jack that require rectangular and square mounting
holes respectively.
Sean James
Sean,
You can always consider using a PCB connector with round pins. I
ah our fav topic again the blasted DC jack
recently also found CUI jacks in DigiKey with flat legs but kinked
drop right in and sit square!
nirvana at last
Dennis Saputelli
Ian Wilson wrote:
At 01:23 PM 27/02/02 -0500, you wrote:
How do I specify a pad with a rectangular or square cutout?
, the longest distance if not square. Unless they are alignment
pins, I would advise against using a square hole in any case.
Cheers!
Drew
- Original Message -
From: Sean James [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Wednesday, February 27, 2002 10:23 AM
Subject: [PEDA] Pads
. Maybe they can load your JOB file and export it as ASCII.
Best regards,
Ivan Baggett
Bagotronix Inc.
website: www.bagotronix.com
- Original Message -
From: Michael Reagan [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Tuesday, November 20, 2001 12:48 PM
Subject: Re: [PEDA
Hello all,
Has anyone had any success in converting old (versions 2 3) PADs files
into Protel?
We have a company that we purchased whose old files are in these formats and
need some conversion utility to do many file conversions.
Please advise.
Lloyd Good
Engineering Systems Co-ordinator
GE
Bagotronix Inc.
website: www.bagotronix.com
- Original Message -
From: [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Monday, September 17, 2001 10:53 AM
Subject: Re: [PEDA] PADs conversion
Hello all,
Has anyone had any success in converting old (versions 2 3) PADs files
to
start with the PADS ascii formats, not the pcb file
Mike Reagan
EDSI
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Monday, September 17, 2001 10:53 AM
To: Protel EDA Forum
Subject: Re: [PEDA] PADs conversion
Hello all,
Has anyone had any success
I need to import a PADS file into Protel.
Original attempt (straight import) failed as unrecognized file.
Any tips?
Paul Nanna
ALtera Corp.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To join or leave this list visit:
*
THE PADS FILE NEEDS TO BE EXPORTED FROM PADS AS AN ASCII (.ASC) FILE
-Original Message-
From: Paul Nanna [mailto:[EMAIL PROTECTED]]
Sent: Monday, April 30, 2001 12:31 PM
To: '[EMAIL PROTECTED]'
Subject: [PEDA] Pads Import
I need to import a PADS file into Protel.
Original attempt
. If someone
has found out something different, please let me know. I thought being
compatible was a good thing ?
Fabe
Guigne International Limited
-Original Message-
From: Paul Nanna [mailto:[EMAIL PROTECTED]]
Sent: Monday, April 30, 2001 5:01 PM
To: '[EMAIL PROTECTED]'
Subject: [PEDA] Pads
44 matches
Mail list logo