[Sprinklerforum] Re: [EXTERNAL] Re: help

e the > difference as a fixed loss at the hose valve. Then I set the hose valve(s) to > require a flow of 250 GPM at a pressure of 100 psi and run the calc. > > -Kyle M > > > From: Rick Matsuda > Sent: Tuesday, May 2, 2023 11:11 AM > To: Discussion list on iss

[Sprinklerforum] Re: [EXTERNAL] Re: help

11:11 AM To: Discussion list on issues relating to automatic fire sprinklers Subject: [EXTERNAL] [Sprinklerforum] Re: help August, I’m not familiar with the ZurnW5000 model PRV. As best as I can remember, Zurn made a field-adjustable and a factory-set PRV. What I think you should do is adjust

[Sprinklerforum] Re: help

supply point which is what the hose valve requires. Rick Matsuda > On May 2, 2023, at 12:34 PM, August Hoffman wrote: > >  > Hello, > > I am a little confused on calculating PRV hose valves and could use some help > getting an answer. > > I have a standpipe sys

[Sprinklerforum] Re: help

day, May 1, 2023 12:48 PM To: sprinklerforum@lists.firesprinkler.org Subject: [Sprinklerforum] help Hello, I am a little confused on calculating PRV hose valves and could use some help getting an answer. I have a standpipe system with two standpipes fed by a pump; the lower floors require PRV

[Sprinklerforum] help

Hello, I am a little confused on calculating PRV hose valves and could use some help getting an answer. I have a standpipe system with two standpipes fed by a pump; the lower floors require PRV hose valves due to higher pressure on the lower floors. We are using the ZurnW5000 PRV hose valves

[Sprinklerforum] Re: Need help with a sanity check - Estimate - Open records on safety professionals

*hand clap* *insert Wolf of Wall Street here* Get Outlook for iOS<https://aka.ms/o0ukef> From: Bob Caputo Sent: Thursday, April 27, 2023 7:25:59 AM To: Discussion list on issues relating to automatic fire sprinklers Subject: [Sprinklerforum] Re: Need hel

[Sprinklerforum] Re: Need help with a sanity check - Estimate - Open records on safety professionals

26 AM *To:* Discussion list on issues relating to automatic fire sprinklers < sprinklerforum@lists.firesprinkler.org> *Subject:* [Sprinklerforum] Need help with a sanity check - Estimate - Open records on safety professionals Funny that the American FTC, coming from the land that claims ca

[Sprinklerforum] Need help with a sanity check - Estimate - Open records on safety professionals

onest, simple information about costs, or about other parameters of our profession to help the public consumer avoid the pitfalls of collusion. We know more about what basketball and curling competitors make and charge, than we do about professionals who steward public safety. We know more about the h

[Sprinklerforum] Re: Need help with a sanity check - Estimate

tps://www.firesprinkler.org/programs/advanced-sprinkler-hydraulic-calculations-workshop/> . *From:* Prahl, Craig *Sent:* Wednesday, April 26, 2023 1:48 PM *To:* Discussion list on issues relating to automatic fire sprinklers < sprinklerforum@lists.firesprinkler.org> *Subject:* [Sprinkler

[Sprinklerforum] Re: Need help with a sanity check - Estimate

He has a math error *Glen Bue**low* *Glen W. Buelow, Inc.* *Fire Protection Design and Consulting216-469-7390** <330.665.4439>* On Wed, Apr 26, 2023 at 2:48 PM Prahl, Craig wrote: > I have an in-house estimator who provided me an estimate of $2.77MM for a > Pre-Engineered building, 350’x250’

[Sprinklerforum] Need help with a sanity check - Estimate

I have an in-house estimator who provided me an estimate of $2.77MM for a Pre-Engineered building, 350’x250’, open production area, no ceilings. 35,000 sf area with 45 ft high roof, 52,500 sf 30 ft high roof. Three wet pipe systems. Open racks with 2-level of in-rack sprinklers, approx. 1400

Re: Need some help - Poz-lock Data sheets

What a great group of people. I have the information I was looking for already! Thanks, John John August Denhardt, PE *Vice President, Engineering and Technical Services* *American Fire Sprinkler Association* m: p: 301-343-1457 214-349-5965 ext 121 w: firesprinkler.org

Need some help - Poz-lock Data sheets

We are looking for data sheets on Poz-lock pipe and fittings. If anyone has these, please forward them to me at jdenha...@firesprinkler.org. We appreciate the assistance. Thanks, John John August Denhardt, PE *Vice President, Engineering and Technical Services* *American Fire Sprinkler Associa

RE: [EXTERNAL] Re: Help Finding Code Section

ct: Re: [EXTERNAL] Re: Help Finding Code Section The 2019 edition of 13 has been changed to (the red bold highlighted text has been deleted): 9.3.14.3 - Where there is a noncombustible space above a noncombustible or limited-combustible drop ceiling that is sprinklered because it is open to an ad

Re: [EXTERNAL] Re: Help Finding Code Section

com/firesprinkler.org/> <https://twitter.com/afsa/status/1039528345367732224> <https://www.linkedin.com/company/american-fire-sprinkler-association-afsa-/> <https://www.instagram.com/firesprinklerorg/> *Help AFSA “Sound the Alarm” about sprinklers!* AFSA’s charitable partner the America

RE: [EXTERNAL] Re: Help Finding Code Section

:sprinklerforum@lists.firesprinkler.org>; bhar...@bvssystemsinc.com<mailto:bhar...@bvssystemsinc.com> Cc: Skyler Bilbo<mailto:sbi...@wenteplumbing.com> Subject: [EXTERNAL] Re: Help Finding Code Section Brian, I believe you are looking for section 8.15.23.3 (2013 edition). The handbook has a nice p

RE: Help Finding Code Section

od We Trust From: Sprinklerforum On Behalf Of Brian Harris via Sprinklerforum Sent: Wednesday, May 20, 2020 7:22 AM To: sprinklerforum@lists.firesprinkler.org Cc: Brian Harris Subject: Help Finding Code Section Picture a non-combustible single story office building, drop ceilings throughout e

Re: Help Finding Code Section

f NFPA that providing protection above the > ceiling was only required within a certain area above this “open” room and > not the entire building. Any help finding the reference would be greatly > appreciated. > > > > *Brian Harris, CET* > > BVS Systems Inc. > > Design

Help Finding Code Section

; room and not the entire building. Any help finding the reference would be greatly appreciated. Brian Harris, CET BVS Systems Inc. Design Manager bvssystemsinc.com<http://bvssystemsinc.com/> Phone: 704.896.9989 Fax: 704.896.1935 ___ Sprinklerfo

RE: 2016 NFPA 13 Reference help

Sent: Friday, December 6, 2019 10:36 AM To: sprinklerforum@lists.firesprinkler.org Cc: Matt Grise Subject: RE: 2016 NFPA 13 Reference help 8.7.3.1.6 "sidewall sprinkler shall be permitted to be installed on opposing or adjacent walls, provided ho sprinkler is located within the maximum protection ar

RE: 2016 NFPA 13 Reference help

forum Sent: Friday, December 06, 2019 11:31 AM To: sprinklerforum@lists.firesprinkler.org Cc: Travis Mack, SET, CFPS, CWBSP, RME-G Subject: 2016 NFPA 13 Reference help Regarding sidewall sprinklers, I recall a section stating that sidewall sprinklers can not be in the throw pattern of another sidewall

2016 NFPA 13 Reference help

Regarding sidewall sprinklers, I recall a section stating that sidewall sprinklers can not be in the throw pattern of another sidewall sprinkler. Can some one help me locate that section? I'm drawing a blank today on search. <http://www.mfpdesign.com/> Travis Mack, CFPS, CWBSP,

deluge help

I have an existing ultra high speed system installed in 2000, no hydraulic placard , and no idea what the existing demand is. New local application ultra high speed systems are being attached and will flow when the existing deluge system flows. My suggestion Is to: 1- Perform flow tests to

RE: NFPA 22 help

ilto:craig.pr...@jacobs.com> | www.jacobs.com<http://www.jacobs.com/> From: Sprinklerforum On Behalf Of Easter, Tim (Contractor) Sent: Wednesday, March 13, 2019 8:40 AM To: sprinklerforum@lists.firesprinkler.org Subject: [EXTERNAL] NFPA 22 help Please. I cannot find any particular chapter

RE: NFPA 22 help - For Fire Flow, check ICC Fire Code

h total fire flow in volume (gpm) and duration, Andrew Steele From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Easter, Tim (Contractor) Sent: Wednesday, March 13, 2019 8:40 AM To: sprinklerforum@lists.firesprinkler.org Subject: NFPA 22 help Please. I cannot

NFPA 22 help

Please. I cannot find any particular chapter in NFPA 22 that deals with reservoirs or clear wells. Can you point me in the right direction? I am trying to determine if our supply from combined reservoir and well are sufficient for sprinkler demands for multiple buildings onsite. Thanks Best, Ti

Re: - Help Support the Project by Providing Fire Pump Data -

cell 260.417.0625 / fax 260.487.7991 email mmo...@shambaugh.com From: Jason Williams To: sprinklerforum@lists.firesprinkler.org Date: 03/23/2018 09:14 AM Subject: - Help Support the Project by Providing Fire Pump Data - Sent by:"Sprinklerforum" BE ADVISE

- Help Support the Project by Providing Fire Pump Data -

All, NFPA is in urgent need of response to this research study and any data that you all could provide would be greatly appreciated and helpful. Please see the attached flyer for details. Best Regards, Jason R. Williams, CET* Manager of ITM Technical Training American Fire Sprinkler Assn. p.

Re: Help Finding ESFR upright greater than K17

201, NZ Postal: PO Box 4022, > Redwood Village, Blenheim 7242, NZ > > “I always wondered why somebody doesn't do something about that. Then I > realised I was somebody” Lily Tomlin > > From: Jeff Polke [mailto:jpo...@gcioutdoor.com] > Sent: Tuesday, 13 February 201

RE: Help Finding ESFR upright greater than K17

inklerforum-boun...@lists.firesprinkler.org] On Behalf Of Jeff Polke Sent: Monday, February 12, 2018 2:38 PM To: sprinklerforum@lists.firesprinkler.org Subject: RE: Help Finding ESFR upright greater than K17 That is true. No one has come forward with what I requested as of yet. My need is specific as I am purchasi

RE: Help Finding ESFR upright greater than K17

forum-boun...@lists.firesprinkler.org] On Behalf Of Jeff Polke Sent: Monday, February 12, 2018 1:38 PM To: sprinklerforum@lists.firesprinkler.org Subject: RE: Help Finding ESFR upright greater than K17 That is true. No one has come forward with what I requested as of yet. My need is specific as I am purchasing a u

RE: Help Finding ESFR upright greater than K17

From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Jeff Polke Sent: Monday, February 12, 2018 12:38 PM To: sprinklerforum@lists.firesprinkler.org Subject: RE: Help Finding ESFR upright greater than K17 That is true. No one has come forward with what I re

RE: Help Finding ESFR upright greater than K17

or less. So I have to use upgraded high pressure fittings as well as Upright heads that have a high Kfactor. This is for high pile warehouse storage 30,000 sqft 20 foot stred racks. Any help here? Jeffrey Polke Co-President jpo...@gcioutdoor.com<mailto:jpo...@gcioutdoor.com>

RE: Help Finding ESFR upright greater than K17

Nicky Marshall Sent: February-12-18 2:13 PM To: sprinklerforum@lists.firesprinkler.org Subject: RE: Help Finding ESFR upright greater than K17 Most of the responses do not seem to have answered your question if you are specifically looking for an upright ESFR sprinkler. To my knowledge, the K17

RE: Help Finding ESFR upright greater than K17

@lists.firesprinkler.org<mailto:sprinklerforum@lists.firesprinkler.org> Subject: Help Finding ESFR upright greater than K17 Good morning all. I am looking for an expert in ESFR sprinkler heads to help me find a ESFR upright head with at least a K factor 17(not 16.8). There does not seem

RE: Help Finding ESFR upright greater than K17

...@knssprinkler.com<mailto:m...@knssprinkler.com> From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Nicky Marshall Sent: Monday, February 12, 2018 2:13 PM To: sprinklerforum@lists.firesprinkler.org Subject: RE: Help Finding ESFR upright greater than K17 M

RE: Help Finding ESFR upright greater than K17

en I realised I was somebody" Lily Tomlin From: Jeff Polke [mailto:jpo...@gcioutdoor.com] Sent: Tuesday, 13 February 2018 5:30 AM To: sprinklerforum@lists.firesprinkler.org Subject: Help Finding ESFR upright greater than K17 Good morning all. I am looking for an expert in ESFR sprinkler hea

RE: Help Finding ESFR upright greater than K17

background. So, once again and as stated before, we ARE here to help but help us with more info so we can better help you. Craig L. Prahl Fire Protection Group Lead/SME Direct - 864.920.7540 Fax - 864.920.7129 Direct Extension 77540 CH2M is now Jacobs. 200 Verdae Blvd. Greenville, SC 29607 craig.pr

RE: Help Finding ESFR upright greater than K17

intimidating posting on this forum sometimes and when you start to attack someone it only discourages others who have never posted from ever posting something. Everyone of us started in this business not knowing ANYTHING, this forum should be used as a tool to help/educate each other on fire

RE: Help Finding ESFR upright greater than K17

oduct updates. You'll get emails on the release of the latest and greatest inventions pertaining to our focus. I'd also be curious why the specific reference to a K17 and NOT a K16.8. There is no difference. Sorry if this may come across as harsh and good luck on your search, w

RE: Help Finding ESFR upright greater than K17

forum-boun...@lists.firesprinkler.org] On Behalf Of John Corcoran Sent: Monday, February 12, 2018 11:54 AM To: sprinklerforum@lists.firesprinkler.org Subject: RE: Help Finding ESFR upright greater than K17 Reliable: K22 and K25 https://www.reliablesprinkler.com/products/sprinklers?pctid[

RE: Help Finding ESFR upright greater than K17

rinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Jeff Polke Sent: Monday, February 12, 2018 11:30 AM To: sprinklerforum@lists.firesprinkler.org Subject: Help Finding ESFR upright greater than K17 Good morning all. I am looking for an expert in ESFR sprinkler heads to hel

Re: Help Finding ESFR upright greater than K17

understand and apply the criteria can lead to a litany of problems. Best. Bruce Verhei > On Feb 12, 2018, at 08:30, Jeff Polke wrote: > > Good morning all. I am looking for an expert in ESFR sprinkler heads to help > me find a ESFR upright head with at least a K factor 17(not 1

RE: Help Finding ESFR upright greater than K17

s://www.linkedin.com/in/travismack "The bitterness of poor quality remains long after the sweetness of low price is forgotten." From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Matt Grise Sent: Monday, February 12, 2018 9:40 AM To: sprinklerf

RE: Help Finding ESFR upright greater than K17

Just curious - why 17 and not 16.8? Matt From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Brian Harris Sent: Monday, February 12, 2018 10:37 AM To: sprinklerforum@lists.firesprinkler.org Subject: RE: Help Finding ESFR upright greater than K17 Never

RE: Help Finding ESFR upright greater than K17

ss of low price is forgotten." From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Jeff Polke Sent: Monday, February 12, 2018 9:30 AM To: sprinklerforum@lists.firesprinkler.org Subject: Help Finding ESFR upright greater than K17 Good morning all. I am looking for

RE: Help Finding ESFR upright greater than K17

AM To: sprinklerforum@lists.firesprinkler.org Subject: Help Finding ESFR upright greater than K17 Good morning all. I am looking for an expert in ESFR sprinkler heads to help me find a ESFR upright head with at least a K factor 17(not 16.8). There does not seem to be other companies that make

RE: Help Finding ESFR upright greater than K17

rforum@lists.firesprinkler.org Subject: Help Finding ESFR upright greater than K17 Good morning all. I am looking for an expert in ESFR sprinkler heads to help me find a ESFR upright head with at least a K factor 17(not 16.8). There does not seem to be other companies that make these ESFR other Tyco. Please let me

Help Finding ESFR upright greater than K17

Good morning all. I am looking for an expert in ESFR sprinkler heads to help me find a ESFR upright head with at least a K factor 17(not 16.8). There does not seem to be other companies that make these ESFR other Tyco. Please let me know. Thanks. Jeffrey Polke Co-President jpo

Help with Storage Criteria [17.2.1.2.1(F)]

I see the same language in quite a few places in chapter 17, but I’m looking specifically at Figure 17.2.1.2.1(f). The criteria is for “storage 25 ft in height with 5 ft to 10 ft clearance to ceiling”. So that leads me to believe the ceiling could be up to 35 feet… is that right? The language i

Re: Help

admonish, go off on tangents, etc. > > On Wed, Jun 21, 2017 at 1:48 PM Richard Carr wrote: > > Usually we get more challenging questions but we're not picky. >> >> >> >> Sent from my T-Mobile 4G LTE Device >> >> >> Original m

Re: Help

te: 6/21/17 4:45 PM (GMT-05:00) > To: sprinklerforum@lists.firesprinkler.org > <mailto:sprinklerforum@lists.firesprinkler.org> > Subject: RE: Help > > You put your right foot in, you take your right foot out … > > > From: Sprinklerforum [mailto:sprinklerforum-b

RE: Help

That's a common problem we all have, tell Carl we said hey. Sent from my T-Mobile 4G LTE Device Original message From: Stacey Schultz Date: 6/21/17 6:30 PM (GMT-05:00) To: sprinklerforum@lists.firesprinkler.org Subject: RE: Help Thanks for the props. And in the ri

RE: Help

rforum@lists.firesprinkler.org Subject: RE: Help Heh-heh-heh … “fairly intelligent” … heh-heh-heh … har-har-har … HA-HA-HA-HA-HA-HA!!! Fairly intelligent compared to what, exactly? A gorilla learning sign language? But it’s really cool that you’re interested enough to follow the forum in an admin job.

RE: Help

: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Stacey Schultz Sent: Wednesday, June 21, 2017 3:05 PM To: sprinklerforum@lists.firesprinkler.org Subject: RE: Help I must say as a silent bystander of this group’s discussions, they’re really fairly intelligent and

RE: Help

PM To: sprinklerforum@lists.firesprinkler.org Subject: Re: Help We also argue, admonish, go off on tangents, etc. On Wed, Jun 21, 2017 at 1:48 PM Richard Carr mailto:rc...@coxfire.com>> wrote: Usually we get more challenging questions but we're not picky. Sent from my T-Mob

Re: Help

eve Leyton > Date: 6/21/17 4:45 PM (GMT-05:00) > To: sprinklerforum@lists.firesprinkler.org > Subject: RE: Help > > You put your right foot in, you take your right foot out … > > > > *From:* Sprinklerforum [mailto: > sprinklerforum-boun...@lists.firesprinkler.org] *On B

RE: Help

Usually we get more challenging questions but we're not picky. Sent from my T-Mobile 4G LTE Device Original message From: Steve Leyton Date: 6/21/17 4:45 PM (GMT-05:00) To: sprinklerforum@lists.firesprinkler.org Subject: RE: Help You put your right foot in, you take

RE: Help

Rob, Just email your question and one of these wise guys will be able to give you some help (hopefully). Welcome to this dysfunctional family 😊 Cliff Whitfield, SET President Fire Design, Inc. 184 Comfort Place Burnsville, NC 28714 Ph: 828-284-4772 [Description: New FDI Logo-4.jpg] cl

RE: Help

You put your right foot in, you take your right foot out ... From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Rob Henderson Sent: Wednesday, June 21, 2017 1:30 PM To: sprinklerforum@lists.firesprinkler.org Subject: Help Hello, How do I participate in

Re: Help

You are participating. Welcome! Chuck Wyse CFI -1 Field Investigator Tyco Fire Protection Products Mobile: +1 302 559 0387 Fax: 410 398 8477 1400 Pennbrook Parkway Lansdale PA 19446 USA chuck.w...@tycofp.com www.tycofsbp.com [TFPP blue

RE: Help

You just did :-) From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Rob Henderson Sent: Wednesday, June 21, 2017 1:30 PM To: sprinklerforum@lists.firesprinkler.org Subject: Help Hello, How do I participate in the forum? Regards, Rob Henderson RWP

RE: Help

You just did From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Rob Henderson Sent: 2017/06/21 4:30 PM To: sprinklerforum@lists.firesprinkler.org Subject: Help Hello, How do I participate in the forum? Regards, Rob Henderson RWP Engineering 31 W

Help

Hello, How do I participate in the forum? Regards, Rob Henderson RWP Engineering 31 W. Congress St., Suite 305 Savannah, Georgia 31401 Phone: (912) 231-9212 [cid:image001.png@01D2CB1C.1A48FF00] ___ Sprinklerforum mailing list Sprinklerforum@lists.fires

RE: HELP - Permanent Heat Source in Sprinkler Riser Rooms

forum@lists.firesprinkler.org Subject: RE: HELP - Permanent Heat Source in Sprinkler Riser Rooms [This sender failed our fraud detection checks and may not be who they appear to be. Learn about spoofing at http://aka.ms/LearnAboutSpoofing] Reliable, heat producing equipment, electric, propane, or natura

RE: HELP - Permanent Heat Source in Sprinkler Riser Rooms

...@lists.firesprinkler.org] On Behalf Of Prahl, Craig/GVL Sent: Thursday, June 01, 2017 9:44 AM To: sprinklerforum@lists.firesprinkler.org Subject: RE: HELP - Permanent Heat Source in Sprinkler Riser Rooms A unit heater with t'stat, or ducted heat into the room. Something that is fixed in place

RE: HELP - Permanent Heat Source in Sprinkler Riser Rooms

forum-requ...@lists.firesprinkler.org Subject: HELP - Permanent Heat Source in Sprinkler Riser Rooms [EXTERNAL] Thanks in advance I could use your help. Will anyone help me to identify what a "permanent heat source" might and might not be when it comes to fire sprinkler valve rooms? What

HELP - Permanent Heat Source in Sprinkler Riser Rooms

Thanks in advance I could use your help. Will anyone help me to identify what a "permanent heat source" might and might not be when it comes to fire sprinkler valve rooms? What can I say - I'm from Texas! Danette at Arro

RE: Plastic Bin Storage on Solid Metal Rack shelf's exceeding 15 feet inheight. - Help!

r 12, 2016 1:01 PM To: sprinklerforum@lists.firesprinkler.org Subject: Plastic Bin Storage on Solid Metal Rack shelf's exceeding 15 feet inheight. - Help! I am trying to come up with an appropriate sprinkler design for this storage configuration. Our customer is storing small parts in smal

Plastic Bin Storage on Solid Metal Rack shelf's exceeding 15 feet in height. - Help!

I am trying to come up with an appropriate sprinkler design for this storage configuration. Our customer is storing small parts in small plastic (polypropylene) open-top bins. The parts are mostly metal, but there are also some plastic parts. The bins vary in size. (16” – 30” deep; 12” – 18”

Re: HELP - Class III

was told to 150% > increase the density from .2 to .3 gpm/sf because of 36” shelf depth. I > cannot find this requirement within NFPA 13. Can anyone help? > > > > Tim Easter, PE > <http://www.wwgfp.com/Brochere.jpg> > 522 Stockton Street > Jacksonville, FL 3220

Re: HELP - Class III

r use of the contents of this message is prohibited. If you have received this electronic transmission in error, please notify us immediately at 1-904-387-7973.*** *From:*craig.pr...@ch2m.com [mailto:craig.pr...@ch2m.com] *Sent:* Monday, November 28, 2016 10:47 AM *To:* sprinklerforum@lists.

RE: HELP - Class III

...@lists.firesprinkler.org] On Behalf Of Tim Easter Sent: Monday, November 28, 2016 8:12 AM To: sprinklerforum@lists.firesprinkler.org Subject: RE: HELP - Class III Table 13.2.1 Height is 12', the shelf depth is 36". Height of celling is 25'. Tim Easter, ? W.W. Gay Fire &

RE: HELP - Class III

he contents of this message is prohibited. If you have received this electronic transmission in error, please notify us immediately at 1-904-387-7973. From: craig.pr...@ch2m.com [mailto:craig.pr...@ch2m.com] Sent: Monday, November 28, 2016 10:47 AM To: sprinklerforum@lists.firesprinkler.or

Re: HELP - Class III

3 gpm/sf because of 36” shelf depth. I cannot find this requirement within NFPA 13. Can anyone help? ** ** *Tim Easter*,*PE* Description: Description: Description: http://www.wwgfp.com/MailLogo.gif <http://www.wwgfp.com/Brochere.jpg> *522 Stockton Street*** *Jacksonville, FL 32204***

RE: HELP - Class III

[mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Tim Easter Sent: Monday, November 28, 2016 10:24 AM To: sprinklerforum@lists.firesprinkler.org Subject: HELP - Class III [EXTERNAL] I have a storage warehouse with Class III commodities. I was told to 150% increase the density

RE: HELP - Class III

Subject: HELP - Class III [EXTERNAL] I have a storage warehouse with Class III commodities. I was told to 150% increase the density from .2 to .3 gpm/sf because of 36" shelf depth. I cannot find this requirement within NFPA 13. Can anyone help? Tim Easter, PE [Description: Description: Descri

HELP - Class III

I have a storage warehouse with Class III commodities. I was told to 150% increase the density from .2 to .3 gpm/sf because of 36" shelf depth. I cannot find this requirement within NFPA 13. Can anyone help? Tim Easter, PE <http://www.wwgfp.com/Brochere.jpg> Description:

Looking for Local Design Help - Spartanburg, SC

If this isn't appropriate or per the rules please delete. I am looking for design help. Taking resumes. NICET III preferred, NICET II minimum. Must be able to work with minimal supervision but help is only a cubicle away. Design will be in the Industrial realm which can include che

Re: help

m@lists.firesprinkler.org > Subject: RE: help > > Unlike NFPA 13, NFPA 14 has the height requirement in the body and not the > appendix. From NFPA 14, 2007 edition: > > 6.4.6 Fire department connections shall be located not less than 18 in. > (457 mm) nor more than 48 in. (1219

Re: help

Most Fire Codes allow the Chief to determine the location and criteria of the FDC. Forest Wilson Fire Sprinkler Contractor forest_wil...@aol.com -Original Message- From: Fairchild, Jack To: sprinklerforum Sent: Thu, Apr 30, 2015 11:52 am Subject: RE: help Unlike NFPA 13

RE: help

thanks -Original Message- From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Fairchild, Jack Sent: Thursday, April 30, 2015 9:53 AM To: sprinklerforum@lists.firesprinkler.org Subject: RE: help Unlike NFPA 13, NFPA 14 has the height requirement in

RE: help

. Jack Fairchild -Original Message- From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of JONATHAN GARCIA Sent: Thursday, April 30, 2015 11:07 AM To: sprinklerforum@lists.firesprinkler.org Subject: RE: help Thank you very much -Original Message

RE: help

Thank you very much -Original Message- From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Jack Carlson Sent: Thursday, April 30, 2015 8:51 AM To: sprinklerforum@lists.firesprinkler.org Subject: RE: help NFPA 13 (2010 and 2013 Edition) A.8.17.2 The

RE: help

1.649.2037 Cell - 706.247.5050 -Original Message- From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of JONATHAN GARCIA Sent: Thursday, April 30, 2015 10:43 AM To: sprinklerforum@lists.firesprinkler.org Subject: help To whom it may concern I am aski

RE: help

Subject: help To whom it may concern I am asking for the location in the code book NFPA or if it is in the IFC that indicates the height minimum and maximum for a FDC. Thank you in advance Jonathan Garcia Fire Marshal/Investigator 1526 Stephanie Rd Rio Rancho, NM 87124 Cell (505) 238-7097 Office

help

To whom it may concern I am asking for the location in the code book NFPA or if it is in the IFC that indicates the height minimum and maximum for a FDC. Thank you in advance Jonathan Garcia Fire Marshal/Investigator 1526 Stephanie Rd Rio Rancho, NM 87124 Cell (505) 238-7097 Office (505) 891-

Re: Help Identify this pipe

o:sprinklerforum-boun...@lists.firesprinkler.org] > On Behalf Of Mike Hairfield > Sent: Monday, June 23, 2014 11:00 AM > To: sprinklerforum@lists.firesprinkler.org > Subject: RE: Help Identify this pipe > > It may be polybutylene pipe! > > >> Date: Mon, 23 Jun 2

RE: Help Identify this pipe

Sent: Monday, June 23, 2014 10:54 AM To: sprinklerfo...@firesprinkler.org Subject: Help Identify this pipe We have discovered some grey pipe supplying sprinklers in a restaurant that has "LIFEProTech" printed on the side. My research has been fruitless except that it appears that it

RE: Help Identify this pipe

Suggestion - try the AHJ/Building Department (open records request) to see if and when originally installed, they "permitted" the installation, and what, if any, of the original plans and specifications they might still have in their files. Andrew Steele Strategic Programs and Safety Dayton Fir

RE: Help Identify this pipe

Grey plastic or streel? -Original Message- From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Greg McGahan Sent: Monday, June 23, 2014 10:54 AM To: sprinklerfo...@firesprinkler.org Subject: Help Identify this pipe We have discovered some grey pipe

RE: Help Identify this pipe

] On Behalf Of Mike Hairfield Sent: Monday, June 23, 2014 11:00 AM To: sprinklerforum@lists.firesprinkler.org Subject: RE: Help Identify this pipe It may be polybutylene pipe! > Date: Mon, 23 Jun 2014 09:54:27 -0500 > Subject: Help Identify this pipe > From: g...@livingwaterfp

RE: Help Identify this pipe

President Fire Design, Inc. Ph: 719-488-3479   cl...@fire-design.com www.fire-design.com -Original Message- From: Sprinklerforum [mailto:sprinklerforum-boun...@lists.firesprinkler.org] On Behalf Of Greg McGahan Sent: Monday, June 23, 2014 8:54 AM To: sprinklerfo...@firesprinkler.org Subject

RE: Help Identify this pipe

It may be polybutylene pipe! > Date: Mon, 23 Jun 2014 09:54:27 -0500 > Subject: Help Identify this pipe > From: g...@livingwaterfp.com > To: sprinklerfo...@firesprinkler.org > > We have discovered some grey pipe supplying sprinklers in a restaurant that > has "LIFEPr

Help Identify this pipe

We have discovered some grey pipe supplying sprinklers in a restaurant that has "LIFEProTech" printed on the side. My research has been fruitless except that it appears that it might have been associated with Alarm work. Can anyone help with this product? Thank You! Greg McGahan Li

RE: Escutcheon help

843-3073 E-mail: si...@reliablesprinkler.com From: sprinklerforum-boun...@firesprinkler.org [sprinklerforum-boun...@firesprinkler.org] On Behalf Of Bob [b...@firebyknight.com] Sent: Thursday, January 05, 2012 12:49 PM To: sprinklerforum@firesprinkler.org Subject: RE: Es

RE: Escutcheon help

M To: sprinklerforum@firesprinkler.org Subject: RE: Escutcheon help Chris, ARGO makes what they call the "Opps Ring". It is an oversize "beauty" ring that your escutcheon fits into. The only time that I have had to use this is when suspended ceilings are not braced properly fo

RE: Escutcheon help

Cahill, Christopher Sent: Thursday, January 05, 2012 8:35 AM To: sprinklerforum@firesprinkler.org Subject: Escutcheon help I haven’t done a lot of work in earthquake areas. NFPA 13 9.3.4.2 Unless the requirements of 9.3.4.3 through 9.3.4.7 are met, where pipe passes through holes in platforms, foun

RE: Escutcheon help

inkler.org Subject: Escutcheon help I haven’t done a lot of work in earthquake areas. NFPA 13 9.3.4.2 Unless the requirements of 9.3.4.3 through 9.3.4.7 are met, where pipe passes through holes in platforms, foundations, walls, or floors, the holes shall be sized such that the diameter of th

Escutcheon help

Perhaps if we fit the pipe through the concrete wall with nominal 0-inch clearance, we could purchase the argument that the concrete was acting as a pipe restraint. After all, we have enough confidence in that concrete wall to attach seismic bracing to it. ;-/ Was the intention not directed

  1   2   3   >