[convirt-users] ConVirt 2.0.1 Open Source Released.
We are pleased to announce availability of ConVirt 2.0.1 open source. We would like to thank ConVirt user community for their continuing participation and support. This release incorporates feedback gathered from the community over last few months. To learn more about the release, please visit http://bit.ly/hZbHvW Thanks ConVirt Team -- Lotusphere 2011 Register now for Lotusphere 2011 and learn how to connect the dots, take your collaborative environment to the next level, and enter the era of Social Business. http://p.sf.net/sfu/lotusphere-d2d ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] Convirt for production environments
Hi list: After following the install process for Convirt 2.0 community version (plus patch bundle 1 and some "glitches" with regards of me using a Debian "Lenny" server) my test enviro works more or less OK. But while it seems quite OK for a test environment it seems not so good for a production one. Some questions rise: 1) Is there any FAQ, Howto, etc. with regards of "properly" start convirt daemon-mode? i.e.: using apache plus mod_wsgi; not using paster with "development.ini"; not having such strong dependencies on environment variables but config entries, etc. 2) Install: current install procedures depend heavily on gaining access to the Internet and downloading quite a lot of Python modules which may or may not be reachable at the moment of installation, pushed forward to a new version, etc. all of this on its own tg2env which may or may not be shareable with other apps in the box. 3) Upgrade and promotion: is there any outlined protocol for proper upgrade? i.e.: upgrading from 0.x to 2.x is a matter of "start anew"; current patch policy is cummulative; what will happen when/if you produce a future "patch bundle 2"? will it be "pushable" on top of a patch bundle 1 + some patches? Will it be a proper migration path from 2.0 to a future 2.1? 4) Feature cutting: on previous releases command line access was avaliable while for 2.0, ACLs, command line and programmatic remote access (by means of XML-RPC) have been "pushed away" to the "enterprise version" (even more, it seems to be a 'post-facto' decision at the view of some "remainders" about ACLs and command line on current community code-base), which regreatably doesn't offer much confidence to us, third parties, in order to make a strong involvement with the tool: no one wants to be "locked in" with a tool less and less featured where more and more production-grade features move away to a pay-only (and not cheap, by the way) version. 5) End user/distribution license for "enterprise version". Is it known under what license will be the "enterprise version" distributed? By the fact that you ask for giving non-exclusive rights with any patch that any third-party could develop it seems obvious that you expect to distribute under a double-license model, more probably with the "enterprise versions" being under a closed one. Will this be the case? Don't you expect this to refrain third parties from sharing development with you? Cheers. -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] Convirt 2 sources.
The svn repository for 2.0 is not made available yet. I will do this as soon as some one in our team has some cycles. In the mean time if u need latest tar ball, let me know. /Jd --- On Tue, 5/18/10, Ronaldo C. A. Chaves wrote: > From: Ronaldo C. A. Chaves > Subject: [convirt-users] Convirt 2 sources. > To: xenman-users@lists.sourceforge.net > Date: Tuesday, May 18, 2010, 4:21 PM > Hi all, > > the Convirt 2 have a svn repository? Can I access it? > -- > > ___ > XenMan-Users mailing list > XenMan-Users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xenman-users > -- ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] Convirt 2 sources.
Hi all, the Convirt 2 have a svn repository? Can I access it? -- ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] Convirt - Unable to connect to web server manager
Please open a new thread on the forum. With paster.log and convirt.log in tar.gz format attached. The output for following commands would help too. netstat -an | grep 80 iptables -nL | grep 80 Thanks --- On Tue, 4/20/10, Georghy wrote: > From: Georghy > Subject: [convirt-users] Convirt - Unable to connect to web server manager > To: xenman-users@lists.sourceforge.net > Date: Tuesday, April 20, 2010, 8:59 AM > I'm trying to install Convirt but > when i type : > http://:8081/ i get the > following page : > connexion failed > Firefox can't establish a connection to the server at > :8081. > It seems that no web server is installed on this machine > or the web server is not responding > Do I miss a step ? > > the tutorial i'm using is : > http://www.convirture.com/wiki/index.php?title=C2_fedora_installation > > can you give me some advice ? > > thanks for all help > > -- > Cordialement, / Greetings, > Georghy FUSCO > > > -- > Download Intel® Parallel Studio Eval > Try the new software tools for yourself. Speed compiling, > find bugs > proactively, and fine-tune applications for parallel > performance. > See why Intel Parallel Studio got high marks during beta. > http://p.sf.net/sfu/intel-sw-dev > ___ > XenMan-Users mailing list > XenMan-Users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xenman-users > -- ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] Convirt 2.0 cms must restarted if a node reboots
Please apply the patch available here. http://forums.convirture.com/viewtopic.php?f=34&t=1928 /Jd --- On Wed, 4/14/10, ignazio.cass...@provincia.torino.it wrote: > From: ignazio.cass...@provincia.torino.it > > Subject: [convirt-users] Convirt 2.0 cms must restarted if a node reboots > To: xenman-users@lists.sourceforge.net > Date: Wednesday, April 14, 2010, 5:30 AM > Good morning, > I am using Convirt 2.0 ... my environment is made up of a > cms server > and a kvm managed node. > If the managed node reboots then it is impossible to use > the web > interface if I do not restart the cms server. > Anyone could telle me where is the problem ? > > Many thanks > Ignazio > > > -- > Download Intel® Parallel Studio Eval > Try the new software tools for yourself. Speed compiling, > find bugs > proactively, and fine-tune applications for parallel > performance. > See why Intel Parallel Studio got high marks during beta. > http://p.sf.net/sfu/intel-sw-dev > ___ > XenMan-Users mailing list > XenMan-Users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xenman-users > -- ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] Convirt - Unable to connect to web server manager
I'm trying to install Convirt but when i type : http://:8081/ i get the following page : connexion failed Firefox can't establish a connection to the server at :8081. It seems that no web server is installed on this machine or the web server is not responding Do I miss a step ? the tutorial i'm using is : http://www.convirture.com/wiki/index.php?title=C2_fedora_installation can you give me some advice ? thanks for all help -- Cordialement, / Greetings, Georghy FUSCO -- Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] Convirt 2.0 logical volumes are not persistent
Good morning, I create a templaqte like "Linux_CD_Install" modifying the storage type to use lvm. When a virtual machine is provisioned a logical volume is created but if the node reboots the logical volume is lost. The problem can be solved creating a logical volume before provisioning the virtual machine but I'd like to know if it is the right procedure. My managed node is a Centos 5.4 x86_64. Many thanks -- Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] Convirt 2.0 cms must restarted if a node reboots
Good morning, I am using Convirt 2.0 ... my environment is made up of a cms server and a kvm managed node. If the managed node reboots then it is impossible to use the web interface if I do not restart the cms server. Anyone could telle me where is the problem ? Many thanks Ignazio -- Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] ConVirt 2.0 Beta Webinar
Guys, check this out. http://www.convirture.com/blog/2009/announcements/sign-up-for-the-convirt-2-0-beta-webinar/ /Jd -- Return on Information: Google Enterprise Search pays you back Get the facts. http://p.sf.net/sfu/google-dev2dev ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] ConVirt 2.0 Beta is available
Hi We are very pleased to announce immediate availability of ConVirt 2.0 Beta! Built on a brand new, 3-tier, repository-based architecture, ConVirt 2.0 incorporates many of our users’ most wanted and anticipated features. For more information, please visit us at http://www.convirture.com/blog/2009/announcements/convirt-2-0-beta-now-available/ ConVirt Team. -- Join us December 9, 2009 for the Red Hat Virtual Experience, a free event focused on virtualization and cloud computing. Attend in-depth sessions from your desk. Your couch. Anywhere. http://p.sf.net/sfu/redhat-sfdev2dev ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] ConVirt 1.1 is released.
Hi We are extremely happy to announce the release of ConVirt 1.1. It has a bunch of new features and fixes. For details please visit the following url. http://www.convirture.com/blog/2009/announcements/convirt-11-is-now-available/ ConVirt Team. -- ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] Convirt
jd pisze: > Yes. Please take a look at the Getting Started Guide on the wiki at > http://www.convirture.com/wiki > > /Jd > Hi, I'm have another question about how install a new virtual machine on a lvm partition, How I can add a new lvm storage? f...@ll -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] Convirt
Yes. Please take a look at the Getting Started Guide on the wiki at http://www.convirture.com/wiki /Jd --- On Mon, 3/16/09, f...@ll wrote: > From: f...@ll > Subject: [convirt-users] Convirt > To: xenman-users@lists.sourceforge.net > Date: Monday, March 16, 2009, 6:24 AM > Hi, > > I'm have a question about a convirt, Can I create new > virtual machine > using convirt? > > f...@ll > > -- > Apps built with the Adobe(R) Flex(R) framework and Flex > Builder(TM) are > powering Web 2.0 with engaging, cross-platform > capabilities. Quickly and > easily build your RIAs with Flex Builder, the > Eclipse(TM)based development > software that enables intelligent coding and step-through > debugging. > Download the free 60 day trial. > http://p.sf.net/sfu/www-adobe-com > ___ > XenMan-Users mailing list > XenMan-Users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xenman-users -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] Convirt
Hi, I'm have a question about a convirt, Can I create new virtual machine using convirt? f...@ll -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] ConVirt goes 1.0
Hi everyone, We are extremely pleased to announce the immediate availability of ConVirt v1.0. This critical milestone comes after many months of development, bug-fixing and hard-earned validation in data centers, all of which was made possible by the invaluable feedback, encouragement and contributions from the ConVirt Community. Please check out the following url for more details. http://www.convirture.com/blog/2009/general/convirt-goes-10/ Thanks - ConVirt Team -- ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] Convirt on Ubuntu
Hi, Many thanks for the quick reply, and for mentioning the forum... I have to apologize for not replying sooner - a combination of the weekend and keeping myself busy with further testing and experimentation. While I had browsed the mailing list archives & wiki primarily, somehow I missed the forum completely. It looks like I could have saved some debugging however, as after the patch, the storage functionality works fine. Long story short: all is now working. But not to spoil everything, there are more details below, plus one question and a minor bug report at the end. Andrew On Sat, Jan 3, 2009 at 10:04 PM, jd wrote: > Andrew, what version of iscsi did u have by default on Ubuntu 8.10 and > what did u end up with after the backport. Milind, Any comments on the > iscsiadm version problem on Ubuntu ? > Ubuntu 8.10 comes with open-iscsi 2.0.865 (where 'iscsiadm -m session' doesn't work, as hinted to in their release notes), while my backport of Ubuntu Jaunty's open-iscsi package is 2.0.870 (discussion here: https://bugs.launchpad.net/ubuntu/intrepid/+source/open-iscsi/+bug/289470) > I will take a look at the log for the hang and see if I can spot > anything. Does it happen if you wait for the summary area to be populated > and then expand the groups and nodes ? It happened if I was on the data center summary, group summary, or individual server; if I allowed the initial summary to fully display or not. I've "abandoned" my vmconsole machine for now, and installed convirt on my laptop (also Ubuntu 8.10), where I installed convirt from package (0.8.?) and then upgraded to 0.9.6 (src and storage folders from tar distribution, replaced startup script) - somewhat sloppy, but it resolved the dependencies quickly & works (help>about confirms the correct version). I delayed pataching paramiko innitially, connected to the servers, deployed a virtual machine based on the linux cd install image (CD is iso on nfs; hda is an iscsi storage target), and successfully installed ubuntu using convirt's console function. Close & start convirt, look at overall summary, server group summary or individual summary - no freeze, although from time to time it hangs for a few seconds. I then patched paramiko, started convirt and it froze shortly after. Returned the original, things worked fine for a bit, up until vmhost2 got "sticky" and froze convirt (something was up with /proc). I put in place the patched version, and with the one server - no problems. Long story short, in the end it could just have been that the one vmhost of mine which "gummed" things, even in my past trials. Current status before migration: after cleanly rebooting the two VM hosts, paramiko is patched, and monitoring of the status of the one provisioned is working well. For the migration problem, it seems there may not be corresponding VM > config file for the running VM (testvm2). > -- when the VM is running on the first node, can you do an Edit Settings > for the VM and see config parameters ? No. That was also part of my problems -- and I assume that whatever was not configured also the cause of the live migratio. However, now that I have the environment working, I can edit without problems and live migration worked (testvm1 from vmhost1 to vmhost2 and back). -- When u shutdown / kill that VM, does it disappear from the tree ? > You may want to select the managed server (vmhost2) and use Import config > file(s) menu option and select the config file for the testvm2. Start the VM > and try migration. Let us know how it goes, and we can dig further in to it. Stopping the VM made it disappear. However, this is no longer a problem -- so surely some problem in my setup was at fault. Regarding Linux Distros : > -- We are currently using Fedora with KVM-70 and Cent OS 5.2 with KVM-72 > for most things. We do have Ubuntu, SLES, etc.. for testing as well. > Many thanks for the help and my apologies for bringing unconstructive issues! At the moment, things are working well. One question: the "Storage" summary displays as 0.00 / 16.00 GB, while Storage is two 8GB iSCSI targets, one of which is assigned to the VM. The question goes: how is the storage usage calculated? As well, one bug (more esthetical than functional) to comment on: "Data Center" summary view shows "VM Summary" as -1/1/0/0 for the "Servers" group, while on the "Servers" group, and the individual server's, it is displayed correctly as1/1/0/0. I'll have to see if I can replicate the problem after my next step (which is cleaning up the systems and starting fresh to make sure all is stable) Hope to bring more positive comments in the future! Andrew -- Check out the new SourceForge.net Marketplace. It is the best place to buy or sell services for just about anything Open Source. http://p.sf.net/sfu/Xq1LFB ___ XenMan-Users mailing list XenMan-Users@li
Re: [convirt-users] Convirt on Ubuntu
Hi Andrew I think you probably missed our patched area and some forum discussion on the iscsi problem. There is a patch available that fixes the issues you have in the diff. Andrew, what version of iscsi did u have by default on Ubuntu 8.10 and what did u end up with after the backport. Milind, Any comments on the iscsiadm version problem on Ubuntu ? I will take a look at the log for the hang and see if I can spot anything. Does it happen if you wait for the summary area to be populated and then expand the groups and nodes ? For the migration problem, it seems there may not be corresponding VM config file for the running VM (testvm2). -- when the VM is running on the first node, can you do an Edit Settings for the VM and see config parameters ? -- When u shutdown / kill that VM, does it disappear from the tree ? You may want to select the managed server (vmhost2) and use Import config file(s) menu option and select the config file for the testvm2. Start the VM and try migration. Let us know how it goes, and we can dig further in to it. Regarding Linux Distros : -- We are currently using Fedora with KVM-70 and Cent OS 5.2 with KVM-72 for most things. We do have Ubuntu, SLES, etc.. for testing as well. It would be great, if others can also share their distributions that are working well for them. Thanks /Jd --- On Sat, 1/3/09, Andrew Séguin wrote: > From: Andrew Séguin > Subject: [convirt-users] Convirt on Ubuntu > To: xenman-users@lists.sourceforge.net > Date: Saturday, January 3, 2009, 5:02 AM > Hi, > > Convirt seems a great software solution, many thanks to all > working on it. > I'd like to report on my recent experiences with it > under Ubuntu 8.10 (mixed > success) and see if you have any tips as to the problems > I'm still facing. > > First, a little about the environment: it consists of > Ubuntu 8.10 i386 > desktop on a pentium 4 ("vmconsole"), and of > Ubuntu 8.10 64bit server on > two Xeon systems ("vmhost1" and > "vmhost2") > > A seperate system exports a folder over NFS (virtual > machine files, CD iso > images, etc), and exports logical volumes as iSCSI targets > (one target per > virtual machine). The NFS mount is the same on all three > systems, iSCSI > targets are visible on all three systems. I believe this > should be a fair > setup to support/test live migration? > > I first faced an Ubuntu specific problem (problems with > iscsiadm), where I > ended up experimentaly "backporting" the package > for Ubuntu Jaunty (9.x) to > get support for iscsiadm -m session. > > Second, I had to patch a little the iscsi storage.sh script > (see the > attached convirt_iscsi_StorageScript.txt for a diff & > notes), to be able to > get the Storage feature to work from the gui. > > After those two issues, I was able to provision a testvm1 > to vmhost1, and > testvm2 to vmhost2 (using an iso file as the CD drive, and > an iscsi target > for the first hard disk), and started installations of > Ubuntu i386 in them, > attach to the console without problems. > > But here start some blocking points for me: > > First, ConVirt freezes from time to time, it would seem > when I click to look > at the summary of a server or at the summary of all servers > in one server > group - however I can't pinpoint the exact cause. I > attached the relevant > parts of the logs in ConvirtFreeze_LogTails.txt. I manage > to work by > clicking on Image Store before clicking on the arrow to > expand a server > (which causes ConVirt to ask me for the password). After > that, I can freely > click on any VM, but clicking on a server or server group > is risking a > freeze. I'll see about trying later to setup ssh keys > later to see if that > helps something. > > Second, live migration is not working. When I drag testvm2 > from vmhost2 to > vmhost1, the system first reminded me "gently" > that I needed socat > installed. Fixed that, now the message is as follows: > Migrate domain / > Errors in migrate all operations / Error migrating testvm2: > 'NoneType' > object has no attribute 'set_managed_node'. If > it's related, when I right > click on a VM, choose "Change VM Settings", all > the fields are blank. I've > attached LiveMigrateException_ConvirtLog.txt with the > exceptions as a live > migrate is attempted. > > So, once again, thanks for the interesting software, but > any thoughts what > might be the cause of the above two problems would be quite > welcome (or how > I can debug further). > > Many thanks, > Andrew > > ps:
[convirt-users] Convirt on Ubuntu
Hi, Convirt seems a great software solution, many thanks to all working on it. I'd like to report on my recent experiences with it under Ubuntu 8.10 (mixed success) and see if you have any tips as to the problems I'm still facing. First, a little about the environment: it consists of Ubuntu 8.10 i386 desktop on a pentium 4 ("vmconsole"), and of Ubuntu 8.10 64bit server on two Xeon systems ("vmhost1" and "vmhost2") A seperate system exports a folder over NFS (virtual machine files, CD iso images, etc), and exports logical volumes as iSCSI targets (one target per virtual machine). The NFS mount is the same on all three systems, iSCSI targets are visible on all three systems. I believe this should be a fair setup to support/test live migration? I first faced an Ubuntu specific problem (problems with iscsiadm), where I ended up experimentaly "backporting" the package for Ubuntu Jaunty (9.x) to get support for iscsiadm -m session. Second, I had to patch a little the iscsi storage.sh script (see the attached convirt_iscsi_StorageScript.txt for a diff & notes), to be able to get the Storage feature to work from the gui. After those two issues, I was able to provision a testvm1 to vmhost1, and testvm2 to vmhost2 (using an iso file as the CD drive, and an iscsi target for the first hard disk), and started installations of Ubuntu i386 in them, attach to the console without problems. But here start some blocking points for me: First, ConVirt freezes from time to time, it would seem when I click to look at the summary of a server or at the summary of all servers in one server group - however I can't pinpoint the exact cause. I attached the relevant parts of the logs in ConvirtFreeze_LogTails.txt. I manage to work by clicking on Image Store before clicking on the arrow to expand a server (which causes ConVirt to ask me for the password). After that, I can freely click on any VM, but clicking on a server or server group is risking a freeze. I'll see about trying later to setup ssh keys later to see if that helps something. Second, live migration is not working. When I drag testvm2 from vmhost2 to vmhost1, the system first reminded me "gently" that I needed socat installed. Fixed that, now the message is as follows: Migrate domain / Errors in migrate all operations / Error migrating testvm2: 'NoneType' object has no attribute 'set_managed_node'. If it's related, when I right click on a VM, choose "Change VM Settings", all the fields are blank. I've attached LiveMigrateException_ConvirtLog.txt with the exceptions as a live migrate is attempted. So, once again, thanks for the interesting software, but any thoughts what might be the cause of the above two problems would be quite welcome (or how I can debug further). Many thanks, Andrew ps: I'm not 100% stuck on Ubuntu, what would be the recommendations of development as the most tested platform? OpenSuse, Fedora, CentOS, other? and...@vmconsole:/usr/local/convirt/storage/scripts/iscsi$ diff storage.sh.orig storage_modified 27c27,28 < for i in `iscsiadm -m session --sid $1 -P3 2>/dev/null | grep "Lun\|Attached.*disk" | grep -v "Lun: 0" | sed '$!N;;s/\n/ /' | awk '{print $6"="$7"|device="$11"|"$12"="$13}'` --- > # Why can't it be Lun: 0 ? On my system, Lun IS 0! > for i in `iscsiadm -m session --sid $1 -P3 2>/dev/null | grep > "Lun\|Attached.*disk" | sed '$!N;;s/\n/ /' | awk '{print > $6"="$7"|device="$11"|"$12"="$13}'` 31c32,33 < disk_size_in_GB=`expr $disk_size / 1024` --- > # On my system, disk_size IS in GB. > disk_size_in_GB=`echo $disk_size` 46c48,49 < total=`expr $total + $disk_size` --- > # Using 'bc' instead of expr to support decimals, at the risk that bc > needs to be installed on all managed servers or face failure... > total=`echo $total + $disk_size | bc` 48c51,52# Again, on my system, I am getting disk sizes in GB. Problem might be > that fdisk is returning the units as well... to be investigated. >echo "SUMMARY=SUMMARY|TOTAL=$total" Fdisk output looks like: === and...@vmhost2:~$ sudo fdisk -l /dev/sdg Disk /dev/sdg: 74.1 GB, 74155294720 bytes 255 heads, 63 sectors/track, 9015 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x9b9cc244 Device Boot Start End Blocks Id System /dev/sdg1 1901572412956 8e Linux LVM SOURCE = ([((0, 0, 1, 0), ('testvm2', 'DOMAIN', '10.0.0.152', None))], ('10.0.0.152', 'MANAGED_NODE', None, 'Servers')) calling cb Migrate domain Traceback (most recent call last): File "/tmp/convirt/convirt-0.9.6/src/convirt/core/model/GridManager.py", line 234, in migrateDomains File "/tmp/convirt/convirt-0.9.6/src/convirt/core/model/GridManager.py", line 280, in migrateDomain File "/tmp/convirt/convirt-0.9.6/src/convirt/core/model/VNode.py", line 504, in migrate_d
Re: [convirt-users] Convirt persistence
As the authentication is done via keys..(external to ConVirt..) -- if it is invoked from the right shell, the connection would work. -- if invoked from a shell without ssh-agent, it will fail. I will look in to paramiko, if we can avoid, ssh-agent, it might be possible. /Jd --- On Sun, 12/21/08, Himanshu Khona wrote: > From: Himanshu Khona > Subject: [convirt-users] Convirt persistence > To: xenman-users@lists.sourceforge.net, jdsw2...@yahoo.com > Date: Sunday, December 21, 2008, 10:22 PM > Dear Jd and all - As I mentioned earlier the keys issue got > resolved after > I invoked convirt from a shell on which ssh keys were added > to ssh-agent. > Now - My questions is, what happens when I get out of > convirt and mistakenly > invoke it from a shell which does not have ssh-agent > running? > Will it fail to connect to that managed nodes? Or once > added, it stores all > the necessary information to persistent db? > If it is latter, then that is fine otherwise this I believe > is an > enhancement which will be good for convirt. > Thanks, > Himanshu > -- > ___ > XenMan-Users mailing list > XenMan-Users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xenman-users -- ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] Convirt persistence
Dear Jd and all - As I mentioned earlier the keys issue got resolved after I invoked convirt from a shell on which ssh keys were added to ssh-agent. Now - My questions is, what happens when I get out of convirt and mistakenly invoke it from a shell which does not have ssh-agent running? Will it fail to connect to that managed nodes? Or once added, it stores all the necessary information to persistent db? If it is latter, then that is fine otherwise this I believe is an enhancement which will be good for convirt. Thanks, Himanshu -- ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] ConVirt pause-button
jd schrieb: > Yes indeed, I was looking for it. This is great. Thanks. Do you know which > KVM version would ur patch be in ? > no - but hopefully kvm-83 > I will have to look in to this as this is related to the migration of KVM. > During migration, we create a KVM instance with --incoming switch... and when > in this state, the monitor remains in the blocked state. i.e. all attempt to > give commands would block. To display correct state of the VM, we keep > polling the vm status, which would hang. > > I had read some traffic about changing this blocking behavior during > migration. If this is changed, then we can enable the pause/resume feature in > the product. Do u know about the migration behavior change I am talking about > ? > if I find some infos about this Ill ping but did you check 'migrate-to-exec'? http://git.kernel.org/?p=virt/kvm/kvm-userspace.git;a=commit;h=f2063b1341ee4b36468b907dbd95a8314647bf28 I will be off for the next few days bye flip > Thanks > /Jd > > > --- On Fri, 12/19/08, Philipp Wehrheim wrote: > >> From: Philipp Wehrheim >> Subject: [convirt-users] ConVirt pause-button >> To: xenman-users@lists.sourceforge.net >> Date: Friday, December 19, 2008, 4:11 AM >> Hey, >> >> the qemu guys just accepted a small patch that makes >> it possible to trigger the VM-status (running|paused). >> Since ConVirt is stateless this information is needed >> in order to indicate the VM status in the gui etc etc. >> >> http://svn.savannah.gnu.org/viewvc?view=rev&root=qemu&revision=6094 >> >> @jd as you were talking about this functionality >> (@kvm-list) some time >> ago do you have already some code to implement it in >> convirt? >> >> bye >> flip >> >> -- >> ___ >> XenMan-Users mailing list >> XenMan-Users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/xenman-users > > > > -- ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] ConVirt pause-button
Yes indeed, I was looking for it. This is great. Thanks. Do you know which KVM version would ur patch be in ? I will have to look in to this as this is related to the migration of KVM. During migration, we create a KVM instance with --incoming switch... and when in this state, the monitor remains in the blocked state. i.e. all attempt to give commands would block. To display correct state of the VM, we keep polling the vm status, which would hang. I had read some traffic about changing this blocking behavior during migration. If this is changed, then we can enable the pause/resume feature in the product. Do u know about the migration behavior change I am talking about ? Thanks /Jd --- On Fri, 12/19/08, Philipp Wehrheim wrote: > From: Philipp Wehrheim > Subject: [convirt-users] ConVirt pause-button > To: xenman-users@lists.sourceforge.net > Date: Friday, December 19, 2008, 4:11 AM > Hey, > > the qemu guys just accepted a small patch that makes > it possible to trigger the VM-status (running|paused). > Since ConVirt is stateless this information is needed > in order to indicate the VM status in the gui etc etc. > > http://svn.savannah.gnu.org/viewvc?view=rev&root=qemu&revision=6094 > > @jd as you were talking about this functionality > (@kvm-list) some time > ago do you have already some code to implement it in > convirt? > > bye > flip > > -- > ___ > XenMan-Users mailing list > XenMan-Users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xenman-users -- ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] ConVirt pause-button
Hey, the qemu guys just accepted a small patch that makes it possible to trigger the VM-status (running|paused). Since ConVirt is stateless this information is needed in order to indicate the VM status in the gui etc etc. http://svn.savannah.gnu.org/viewvc?view=rev&root=qemu&revision=6094 @jd as you were talking about this functionality (@kvm-list) some time ago do you have already some code to implement it in convirt? bye flip -- ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] ConVirt changes for KVM (79) support
Hey, I found ConVirt a few days ago and I have to say that it is a really handy tool! During my tests I found a number of small problems and limitations the attached patches reflect my changes. Since I have no knowledge about python the patches need some reviewing. Is there a central repository that is used to maintain the software? My changes were made to the latest (0.9.6) version I could find. The following things were changed: * changed pause and migrate syntax to match new qemu-style syntax in 0001-changed-pause-and-migrate-syntax-to-match-new-qemu.patch * added support for the KVM "-serial " switch in the config 0002-added-support-for-the-KVM-serial-args-switch-i.patch * added support for the KVM "usbdevice" switch in the config this is especial usefull for vnc mouse sync 0003-added-support-for-the-KVM-usbdevice-switch-in-the.patch * added support to run a KVM instance as other user than root 0004-added-support-to-run-a-KVM-instance-as-other-user-th.patch 0005-added-missing-definition-of-USER-to-function-start.patch * allow top to exit with return value 1 and still parse the output 0006-allow-top-to-exit-with-return-value-1-and-still-par.patch The patches can be found at: http://flipstar.net/tmp/convirt/patches_0.9.6/ -- regards flip >From 50632a69f25013c3bb62556c2d4f2197cbcee3c5 Mon Sep 17 00:00:00 2001 From: Philipp Wehrheim Date: Wed, 10 Dec 2008 08:58:44 +0100 Subject: [PATCH] changed pause and migrate syntax to match new qemu-style syntax in /src/convirt/core/platforms/kvm/KVMProxy.py --- .../src/convirt/core/platforms/kvm/KVMProxy.py |8 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/convirt-0.9.6/src/convirt/core/platforms/kvm/KVMProxy.py b/convirt-0.9.6/src/convirt/core/platforms/kvm/KVMProxy.py index 68b562f..35507f4 100644 --- a/convirt-0.9.6/src/convirt/core/platforms/kvm/KVMProxy.py +++ b/convirt-0.9.6/src/convirt/core/platforms/kvm/KVMProxy.py @@ -673,7 +673,7 @@ class KVMProxy(VMM): if prompt and output == cmd: # vm stopped now lets use migrate to save it to the file # save vmconfig context ? -cmd = "migrate " + "file://" + filename +cmd = "migrate " + "file:" + filename (output,prompt) = self.send_command(id, cmd) if prompt and output == cmd: print "vm state saved to " + filename @@ -700,7 +700,7 @@ class KVMProxy(VMM): filename = filename[0:-4] cfg = self.node.new_config(ctx_file) -cfg["incoming"] = "file://" + filename +cfg["incoming"] = "file:" + filename self.start(cfg) def quit_vm(self,id): @@ -740,7 +740,7 @@ class KVMProxy(VMM): #listen on all interfaces. print "LIVE MiGRATION ", live -cfg["incoming"] = "tcp://0:" + str(port) +cfg["incoming"] = "tcp:0:" + str(port) try: dst.create_dom(cfg) @@ -763,7 +763,7 @@ class KVMProxy(VMM): else: raise Exception("error stopping VM during migration :" + output) -cmd = "migrate tcp://" + dst.get_address() +":"+str(port) +cmd = "migrate tcp:" + dst.get_address() +":"+str(port) print "Initiating migration ", cmd (output,prompt) = self.send_command(id,cmd) if prompt and output == cmd: -- 1.5.4.5 >From 4705616e7766382aa626fe1fd2bc88746cc9507e Mon Sep 17 00:00:00 2001 From: Philipp Wehrheim Date: Thu, 11 Dec 2008 08:31:57 +0100 Subject: [PATCH] added support for the KVM "-serial " switch in the config ... serial='unix:/tmp/serial,server,nowait' ... --- .../src/convirt/core/platforms/kvm/KVMProxy.py |3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/convirt-0.9.6/src/convirt/core/platforms/kvm/KVMProxy.py b/convirt-0.9.6/src/convirt/core/platforms/kvm/KVMProxy.py index 35507f4..cb4c372 100644 --- a/convirt-0.9.6/src/convirt/core/platforms/kvm/KVMProxy.py +++ b/convirt-0.9.6/src/convirt/core/platforms/kvm/KVMProxy.py @@ -475,6 +475,9 @@ class KVMProxy(VMM): opt = opt.replace("_", "-") # python prohibits - in variables if opt == "extra": opt = "append" + +if opt == "serial": +opt = "serial" if opt == "memory" : opt = "m" -- 1.5.4.5 >From 5ea177b62a744f90987aaf23a87b26468b8c0f27 Mon Sep 17 00:00:00 2001 From: Philipp Wehrheim Date: Thu, 11 Dec 2008 09:23:30 +0100 Subject: [PATCH] added support for the KVM "usbdevice" switch in the config this is especial usefull for vnc mouse sync aka -usbdevice tablet ... usbdevice='tablet' ... --- .../src/convirt/core/platforms/kvm/KVMProxy.py |3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/convirt-0.9.6/src/convirt/core/platforms/kvm/KVMProxy.py
Re: [convirt-users] convirt,iscsi and debian etch
Thanks for input. Is it easy to upgrade existing environment to have the right version ? Milind, can we check for the version reliably? May be we need to find out what version the P3 option was added. What error do u see in the product ? May be an entry with the error message on http://xenman.sourceforge.net/wiki/index.php/FAQ under troubleshooting section would be appropriate. ConVirt in the current release does not automatically do the ATTACH and DETACH but are reserved for future. Thanks for testing them out anyway :) Thanks /Jd --- On Wed, 11/26/08, Denis Cardon <[EMAIL PROTECTED]> wrote: > From: Denis Cardon <[EMAIL PROTECTED]> > Subject: [convirt-users] convirt,iscsi and debian etch > To: xenman-users@lists.sourceforge.net > Date: Wednesday, November 26, 2008, 1:00 AM > Hi, > > First I'd like to thanks you all for the great job you > are doing on > convirt. I guess it is really not far from being production > ready! > > it seems that convirt iscsi script > (./convirt-0.9.6/storage/scripts/iscsi/storage.sh) uses > iscsiadm "-P3" > flag which is not available on iscsiadm version 2.0-730 > coming with > debian etch (it is ok with debian lenny, version 2.0.870). > Is there any > work around? Or should I add it to the caveat list in the > wiki? Would it > be possible to add a warning if isciadm is too old? > > Otherwise storage.sh ATTACH an DETACH operation works fine > on etch > (tested on command line since convirt couldn't invoke > GET_DISKS because > of the above mentionned bug). > > Cheers, > > Denis > > -- > Denis Cardon > Tranquil IT Systems > 44 bvd des pas enchantés > 44230 Saint Sébastien sur Loire > tel : +33 (0) 2.40.97.57.56 > http://www.tranquil-it-systems.fr > > > > - > This SF.Net email is sponsored by the Moblin Your Move > Developer's challenge > Build the coolest Linux based applications with Moblin SDK > & win great prizes > Grand prize is a trip for two to an Open Source event > anywhere in the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > ___ > XenMan-Users mailing list > XenMan-Users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xenman-users - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] convirt,iscsi and debian etch
Hi, First I'd like to thanks you all for the great job you are doing on convirt. I guess it is really not far from being production ready! it seems that convirt iscsi script (./convirt-0.9.6/storage/scripts/iscsi/storage.sh) uses iscsiadm "-P3" flag which is not available on iscsiadm version 2.0-730 coming with debian etch (it is ok with debian lenny, version 2.0.870). Is there any work around? Or should I add it to the caveat list in the wiki? Would it be possible to add a warning if isciadm is too old? Otherwise storage.sh ATTACH an DETACH operation works fine on etch (tested on command line since convirt couldn't invoke GET_DISKS because of the above mentionned bug). Cheers, Denis -- Denis Cardon Tranquil IT Systems 44 bvd des pas enchantés 44230 Saint Sébastien sur Loire tel : +33 (0) 2.40.97.57.56 http://www.tranquil-it-systems.fr - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] convirt 0.9.6 under debian lenny
Hello All, I try to run Convirt under a Debian Lenny System. I have Xen-3.2 Hypervisor installed and running. Python2.5, python-twisted 8.1.0-4 and Python-paramiko1.7.4 with patch are installed. I connect via vnc to this machine and try to start the Convirt Binary from Tarball. convirt does not start and I recieve this messages: debian-xenhost1:/opt/convirt-0.9.6# ./ConVirt Valid, writable configuration found, using /opt/convirt-0.9.6/convirt.conf /root/.mozilla/firefox/ma66je0n.default/prefs.js type is missing. Direct connection. None, None guessed proxy setup None None debian-xenhost1:/opt/convirt-0.9.6# Does anyone run Convirt under a Debian Lenny and can give me some hints whats wrong with my setup? Greetz, Torsten - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] ConVirt 0.9.6 Released.
Hi Everyone, We are pleased to announce ConVirt 0.9.6. This release has some UI improvements, feature enhancements and critical bug fixes. For more information, please visit http://www.convirt.net. Thanks ConVirt Team - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] ConVirt 0.9.5 released
Hi Guys, We are pleased to announce ConVirt 0.9.5 which includes * drag and drop live migration for KVM * Storage Management and * some critical bug fixes For more information, please visit us at http://www.convirt.net/ Thanks ConVirt Team - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] ConVirt 0.9.1 Released.
Hi Guys, We are pleased to announce version 0.9.1 of ConVirt which includes KVM support, a brand new wiki, plugin development guide and some critical bug fixes. For more information, please visit ConVirt website. ConVirt Team - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] ConVirt 0.9 released
Hi Vishwanath, Good to know that you are using ConVirt 0.8.2 You should be able to download the release. www.convirt.net, and go to the download page. Here is link..for convenience. http://sourceforge.net/project/showfiles.php?group_id=168929&package_id=261722&release_id=608239 Would love to hear about your environment and how you use ConVirt. /Jd --- On Fri, 6/20/08, Viswanath T K <[EMAIL PROTECTED]> wrote: > From: Viswanath T K <[EMAIL PROTECTED]> > Subject: Re: [convirt-users] ConVirt 0.9 released > To: [EMAIL PROTECTED] > Cc: "xenman-users" , "xenman-packaging" > <[EMAIL PROTECTED]>, "XenUsers" <[EMAIL PROTECTED]> > Date: Friday, June 20, 2008, 1:56 AM > Hi > > I have been actively using convirt 0.8.2 on fedora 7 . By > when can I > download convirt 0.9 > > > Thanks, > Viswanath T K > > > On Fri, 2008-06-20 at 00:35 -0700, jd wrote: > > We are pleased to announce the availability of ConVirt > version 0.9. The release includes : > > > > * Platform Plugin development guide > > * Server Pool Settings for consistent provisioning > > * Image groups for easy image management > > * Enhanced server information > > > > Visit http://www.convirt.net for details and > > downloading the product. > > > > /Jd > > > > > > > > > > > - > > Check out the new SourceForge.net Marketplace. > > It's the best place to buy or sell services for > > just about anything Open Source. > > http://sourceforge.net/services/buy/index.php > > ___ > > XenMan-Users mailing list > > XenMan-Users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/xenman-users > > > - > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > ___ > XenMan-Users mailing list > XenMan-Users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xenman-users - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] ConVirt 0.9 released
Hi I have been actively using convirt 0.8.2 on fedora 7 . By when can I download convirt 0.9 Thanks, Viswanath T K On Fri, 2008-06-20 at 00:35 -0700, jd wrote: > We are pleased to announce the availability of ConVirt version 0.9. The > release includes : > > * Platform Plugin development guide > * Server Pool Settings for consistent provisioning > * Image groups for easy image management > * Enhanced server information > > Visit http://www.convirt.net for details and > downloading the product. > > /Jd > > > > > - > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > ___ > XenMan-Users mailing list > XenMan-Users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xenman-users - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] ConVirt 0.9 released
We are pleased to announce the availability of ConVirt version 0.9. The release includes : * Platform Plugin development guide * Server Pool Settings for consistent provisioning * Image groups for easy image management * Enhanced server information Visit http://www.convirt.net for details and downloading the product. /Jd - Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] convirt running on CentOS5.1
http://www.lag.net/paramiko/ has some pointers to repositories. Please browse through past emails on this list and help and support forums. /Jd --- David Hláèik <[EMAIL PROTECTED]> wrote: > Hi to all, > > i am new in this mailinglist. > I have xen3.2 running on my Centos5.1 box. > I want to install and run convirt on that box, > What is the best way install it? And what are > dependencies. > I did first try to install rpm package for fedora > with --nodeps parameter, > but it needs python-paramiko , which i do not know > where to find. > > Thanks in advance! > David > - > This SF.net email is sponsored by the 2008 > JavaOne(SM) Conference > Don't miss this year's exciting event. There's still > time to save $100. > Use priority code J8TL2D2. > http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone > ___ > XenMan-Users mailing list > XenMan-Users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xenman-users > Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ - This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] convirt running on CentOS5.1
Hi to all, i am new in this mailinglist. I have xen3.2 running on my Centos5.1 box. I want to install and run convirt on that box, What is the best way install it? And what are dependencies. I did first try to install rpm package for fedora with --nodeps parameter, but it needs python-paramiko , which i do not know where to find. Thanks in advance! David - This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] ConVirt 0.8.2 "111 Connection Refused"
Please check out help/doc for 0.8.2, there are some changes in the way ConVirt client talks to the managed server. If the ssh_tunnel option works in your setup it is good. /Jd --- Trey Sheldon <[EMAIL PROTECTED]> wrote: > To update: > > After manually changing the xen_protocol to > "ssh_tunnel" in /etc/ > convirt.conf, I managed to get a connection and > information from the > xen server. > > -Trey > > On Apr 17, 2008, at 12:59 PM, Trey Sheldon wrote: > > > Hi All, > > > > I've been wracking my brain trying to get around > this issue but I > > haven't had any luck yet > > > > Here's my setup: > > ConVirt .8.2 running inside a Centos 5.1 xen > environment. -- local > > host runs fine after adding a default section to > convirt.conf and the > > use_3_0_api=true flag. > > Xen 3.2 server running in a gentoo machine Xen > is up and going no > > problems there-- > > > > When I attempt to add the remote host (via tcp or > ssl) I receive a > > popup saying "Connect node > 111Connection refused" > > > > The odd thing is, I see in the paramiko log that > it did connect and > > opened /etc/convirt.conf. > > > > Copies of paramiko.log and my xend-config are > below. > > > > Thanks for any insight! > > > > -Trey > > > > -- > > > paramiko.log > > DEB [20080417-12:57:41.109] thr=1 > paramiko.transport: starting > > thread (client mode): 0xB79CBD4CL > > INF [20080417-12:57:41.113] thr=1 > paramiko.transport: Connected > > (version 2.0, client OpenSSH_4.7) > > DEB [20080417-12:57:41.116] thr=1 > paramiko.transport: kex algos: > > ['diffie-hellman-group-exchange-sha256', > 'diffie-hellman-group- > > exchange-sha1', 'diffie-hellman-group14-sha1', > 'diffie-hellman-group1- > > sha1'] server key:['ssh-rsa', 'ssh-dss'] client > encrypt:['aes128-cbc', > > '3des-cbc', 'blowfish-cbc', 'cast128-cbc', > 'arcfour128', 'arcfour256', > > 'arcfour', 'aes192-cbc', 'aes256-cbc', > '[EMAIL PROTECTED]', > > 'aes128-ctr', 'aes192-ctr', 'aes256-ctr'] server > encrypt:['aes128- > > cbc', '3des-cbc', 'blowfish-cbc', 'cast128-cbc', > 'arcfour128', > > 'arcfour256', 'arcfour', 'aes192-cbc', > 'aes256-cbc', '[EMAIL PROTECTED] > > ', 'aes128-ctr', 'aes192-ctr', 'aes256-ctr'] > client mac:['hmac-md5', > > 'hmac-sha1', '[EMAIL PROTECTED]', > 'hmac-ripemd160', '[EMAIL PROTECTED] > > ', 'hmac-sha1-96', 'hmac-md5-96'] server > mac:['hmac-md5', 'hmac- > > sha1', '[EMAIL PROTECTED] > > ', 'hmac-ripemd160', '[EMAIL PROTECTED]', > 'hmac-sha1-96', > > 'hmac-md5-96'] client compress:['none', > '[EMAIL PROTECTED]'] server > > compress:['none', '[EMAIL PROTECTED]'] client > lang:[''] server lang: > > [''] kex follows?False > > DEB [20080417-12:57:41.117] thr=1 > paramiko.transport: Ciphers > > agreed: local=aes128-cbc, remote=aes128-cbc > > DEB [20080417-12:57:41.117] thr=1 > paramiko.transport: using kex > > diffie-hellman-group1-sha1; server key type > ssh-rsa; cipher: local > > aes128-cbc, remote aes128-cbc; mac: local > hmac-sha1, remote hmac-sha1; > > compression: local none, remote none > > DEB [20080417-12:57:41.280] thr=1 > paramiko.transport: Switch to new > > keys ... > > DEB [20080417-12:57:43.888] thr=2 > paramiko.transport: starting > > thread (client mode): 0xB79CBEACL > > INF [20080417-12:57:43.889] thr=2 > paramiko.transport: Connected > > (version 2.0, client OpenSSH_4.7) > > DEB [20080417-12:57:43.913] thr=2 > paramiko.transport: kex algos: > > ['diffie-hellman-group-exchange-sha256', > 'diffie-hellman-group- > > exchange-sha1', 'diffie-hellman-group14-sha1', > 'diffie-hellman-group1- > > sha1'] server key:['ssh-rsa', 'ssh-dss'] client > encrypt:['aes128-cbc', > > '3des-cbc', 'blowfish-cbc', 'cast128-cbc', > 'arcfour128', 'arcfour256', > > 'arcfour', 'aes192-cbc', 'aes256-cbc', > '[EMAIL PROTECTED]', > > 'aes128-ctr', 'aes192-ctr', 'aes256-ctr'] server > encrypt:['aes128- > > cbc', '3des-cbc', 'blowfish-cbc', 'cast128-cbc', > 'arcfour128', > > 'arcfour256', 'arcfour', 'aes192-cbc', > 'aes256-cbc', '[EMAIL PROTECTED] > > ', 'aes128-ctr', 'aes192-ctr', 'aes256-ctr'] > client mac:['hmac-md5', > > 'hmac-sha1', '[EMAIL PROTECTED]', > 'hmac-ripemd160', '[EMAIL PROTECTED] > > ', 'hmac-sha1-96', 'hmac-md5-96'] server > mac:['hmac-md5', 'hmac- > > sha1', '[EMAIL PROTECTED] > > ', 'hmac-ripemd160', '[EMAIL PROTECTED]', > 'hmac-sha1-96', > > 'hmac-md5-96'] client compress:['none', > '[EMAIL PROTECTED]'] server > > compress:['none', '[EMAIL PROTECTED]'] client > lang:[''] server lang: > > [''] kex follows?False > > DEB [20080417-12:57:43.913] thr=2 > paramiko.transport: Ciphers > > agreed: local=aes128-cbc, remote=aes128-cbc > > DEB [20080417-12:57:43.914] thr=2 > paramiko.transport: using kex > > diffie-hellman-group1-sha1; server key type > ssh-rsa; cipher: local > > aes128-cbc, remote aes128-cbc; mac: local > hmac-sha1, remote hmac-sha1; > > compression: local none, remote none > > DEB [20080417-12:57:44.138] thr=2 > paramiko.transport: S
Re: [convirt-users] ConVirt 0.8.2 "111 Connection Refused"
To update: After manually changing the xen_protocol to "ssh_tunnel" in /etc/ convirt.conf, I managed to get a connection and information from the xen server. -Trey On Apr 17, 2008, at 12:59 PM, Trey Sheldon wrote: > Hi All, > > I've been wracking my brain trying to get around this issue but I > haven't had any luck yet > > Here's my setup: > ConVirt .8.2 running inside a Centos 5.1 xen environment. -- local > host runs fine after adding a default section to convirt.conf and the > use_3_0_api=true flag. > Xen 3.2 server running in a gentoo machine Xen is up and going no > problems there-- > > When I attempt to add the remote host (via tcp or ssl) I receive a > popup saying "Connect node 111Connection refused" > > The odd thing is, I see in the paramiko log that it did connect and > opened /etc/convirt.conf. > > Copies of paramiko.log and my xend-config are below. > > Thanks for any insight! > > -Trey > > -- > paramiko.log > DEB [20080417-12:57:41.109] thr=1 paramiko.transport: starting > thread (client mode): 0xB79CBD4CL > INF [20080417-12:57:41.113] thr=1 paramiko.transport: Connected > (version 2.0, client OpenSSH_4.7) > DEB [20080417-12:57:41.116] thr=1 paramiko.transport: kex algos: > ['diffie-hellman-group-exchange-sha256', 'diffie-hellman-group- > exchange-sha1', 'diffie-hellman-group14-sha1', 'diffie-hellman-group1- > sha1'] server key:['ssh-rsa', 'ssh-dss'] client encrypt:['aes128-cbc', > '3des-cbc', 'blowfish-cbc', 'cast128-cbc', 'arcfour128', 'arcfour256', > 'arcfour', 'aes192-cbc', 'aes256-cbc', '[EMAIL PROTECTED]', > 'aes128-ctr', 'aes192-ctr', 'aes256-ctr'] server encrypt:['aes128- > cbc', '3des-cbc', 'blowfish-cbc', 'cast128-cbc', 'arcfour128', > 'arcfour256', 'arcfour', 'aes192-cbc', 'aes256-cbc', '[EMAIL PROTECTED] > ', 'aes128-ctr', 'aes192-ctr', 'aes256-ctr'] client mac:['hmac-md5', > 'hmac-sha1', '[EMAIL PROTECTED]', 'hmac-ripemd160', '[EMAIL PROTECTED] > ', 'hmac-sha1-96', 'hmac-md5-96'] server mac:['hmac-md5', 'hmac- > sha1', '[EMAIL PROTECTED] > ', 'hmac-ripemd160', '[EMAIL PROTECTED]', 'hmac-sha1-96', > 'hmac-md5-96'] client compress:['none', '[EMAIL PROTECTED]'] server > compress:['none', '[EMAIL PROTECTED]'] client lang:[''] server lang: > [''] kex follows?False > DEB [20080417-12:57:41.117] thr=1 paramiko.transport: Ciphers > agreed: local=aes128-cbc, remote=aes128-cbc > DEB [20080417-12:57:41.117] thr=1 paramiko.transport: using kex > diffie-hellman-group1-sha1; server key type ssh-rsa; cipher: local > aes128-cbc, remote aes128-cbc; mac: local hmac-sha1, remote hmac-sha1; > compression: local none, remote none > DEB [20080417-12:57:41.280] thr=1 paramiko.transport: Switch to new > keys ... > DEB [20080417-12:57:43.888] thr=2 paramiko.transport: starting > thread (client mode): 0xB79CBEACL > INF [20080417-12:57:43.889] thr=2 paramiko.transport: Connected > (version 2.0, client OpenSSH_4.7) > DEB [20080417-12:57:43.913] thr=2 paramiko.transport: kex algos: > ['diffie-hellman-group-exchange-sha256', 'diffie-hellman-group- > exchange-sha1', 'diffie-hellman-group14-sha1', 'diffie-hellman-group1- > sha1'] server key:['ssh-rsa', 'ssh-dss'] client encrypt:['aes128-cbc', > '3des-cbc', 'blowfish-cbc', 'cast128-cbc', 'arcfour128', 'arcfour256', > 'arcfour', 'aes192-cbc', 'aes256-cbc', '[EMAIL PROTECTED]', > 'aes128-ctr', 'aes192-ctr', 'aes256-ctr'] server encrypt:['aes128- > cbc', '3des-cbc', 'blowfish-cbc', 'cast128-cbc', 'arcfour128', > 'arcfour256', 'arcfour', 'aes192-cbc', 'aes256-cbc', '[EMAIL PROTECTED] > ', 'aes128-ctr', 'aes192-ctr', 'aes256-ctr'] client mac:['hmac-md5', > 'hmac-sha1', '[EMAIL PROTECTED]', 'hmac-ripemd160', '[EMAIL PROTECTED] > ', 'hmac-sha1-96', 'hmac-md5-96'] server mac:['hmac-md5', 'hmac- > sha1', '[EMAIL PROTECTED] > ', 'hmac-ripemd160', '[EMAIL PROTECTED]', 'hmac-sha1-96', > 'hmac-md5-96'] client compress:['none', '[EMAIL PROTECTED]'] server > compress:['none', '[EMAIL PROTECTED]'] client lang:[''] server lang: > [''] kex follows?False > DEB [20080417-12:57:43.913] thr=2 paramiko.transport: Ciphers > agreed: local=aes128-cbc, remote=aes128-cbc > DEB [20080417-12:57:43.914] thr=2 paramiko.transport: using kex > diffie-hellman-group1-sha1; server key type ssh-rsa; cipher: local > aes128-cbc, remote aes128-cbc; mac: local hmac-sha1, remote hmac-sha1; > compression: local none, remote none > DEB [20080417-12:57:44.138] thr=2 paramiko.transport: Switch to new > keys ... > DEB [20080417-12:57:44.185] thr=2 paramiko.transport: userauth is OK > INF [20080417-12:57:44.188] thr=2 paramiko.transport: Authentication > type (password) not permitted. > DEB [20080417-12:57:44.189] thr=2 paramiko.transport: Allowed > methods: ['publickey', 'keyboard-interactive'] > DEB [20080417-12:57:44.211] thr=2 paramiko.transport: userauth is OK > INF [20080417-12:57:44.221] thr=2 paramiko.transport: Authentication > (keyboard-interactive) successful! > DEB [20080417-
[convirt-users] ConVirt 0.8.2 "111 Connection Refused"
Hi All, I've been wracking my brain trying to get around this issue but I haven't had any luck yet Here's my setup: ConVirt .8.2 running inside a Centos 5.1 xen environment. -- local host runs fine after adding a default section to convirt.conf and the use_3_0_api=true flag. Xen 3.2 server running in a gentoo machine Xen is up and going no problems there-- When I attempt to add the remote host (via tcp or ssl) I receive a popup saying "Connect node 111Connection refused" The odd thing is, I see in the paramiko log that it did connect and opened /etc/convirt.conf. Copies of paramiko.log and my xend-config are below. Thanks for any insight! -Trey -- paramiko.log DEB [20080417-12:57:41.109] thr=1 paramiko.transport: starting thread (client mode): 0xB79CBD4CL INF [20080417-12:57:41.113] thr=1 paramiko.transport: Connected (version 2.0, client OpenSSH_4.7) DEB [20080417-12:57:41.116] thr=1 paramiko.transport: kex algos: ['diffie-hellman-group-exchange-sha256', 'diffie-hellman-group- exchange-sha1', 'diffie-hellman-group14-sha1', 'diffie-hellman-group1- sha1'] server key:['ssh-rsa', 'ssh-dss'] client encrypt:['aes128-cbc', '3des-cbc', 'blowfish-cbc', 'cast128-cbc', 'arcfour128', 'arcfour256', 'arcfour', 'aes192-cbc', 'aes256-cbc', '[EMAIL PROTECTED]', 'aes128-ctr', 'aes192-ctr', 'aes256-ctr'] server encrypt:['aes128- cbc', '3des-cbc', 'blowfish-cbc', 'cast128-cbc', 'arcfour128', 'arcfour256', 'arcfour', 'aes192-cbc', 'aes256-cbc', '[EMAIL PROTECTED] ', 'aes128-ctr', 'aes192-ctr', 'aes256-ctr'] client mac:['hmac-md5', 'hmac-sha1', '[EMAIL PROTECTED]', 'hmac-ripemd160', '[EMAIL PROTECTED] ', 'hmac-sha1-96', 'hmac-md5-96'] server mac:['hmac-md5', 'hmac-sha1', '[EMAIL PROTECTED] ', 'hmac-ripemd160', '[EMAIL PROTECTED]', 'hmac-sha1-96', 'hmac-md5-96'] client compress:['none', '[EMAIL PROTECTED]'] server compress:['none', '[EMAIL PROTECTED]'] client lang:[''] server lang: [''] kex follows?False DEB [20080417-12:57:41.117] thr=1 paramiko.transport: Ciphers agreed: local=aes128-cbc, remote=aes128-cbc DEB [20080417-12:57:41.117] thr=1 paramiko.transport: using kex diffie-hellman-group1-sha1; server key type ssh-rsa; cipher: local aes128-cbc, remote aes128-cbc; mac: local hmac-sha1, remote hmac-sha1; compression: local none, remote none DEB [20080417-12:57:41.280] thr=1 paramiko.transport: Switch to new keys ... DEB [20080417-12:57:43.888] thr=2 paramiko.transport: starting thread (client mode): 0xB79CBEACL INF [20080417-12:57:43.889] thr=2 paramiko.transport: Connected (version 2.0, client OpenSSH_4.7) DEB [20080417-12:57:43.913] thr=2 paramiko.transport: kex algos: ['diffie-hellman-group-exchange-sha256', 'diffie-hellman-group- exchange-sha1', 'diffie-hellman-group14-sha1', 'diffie-hellman-group1- sha1'] server key:['ssh-rsa', 'ssh-dss'] client encrypt:['aes128-cbc', '3des-cbc', 'blowfish-cbc', 'cast128-cbc', 'arcfour128', 'arcfour256', 'arcfour', 'aes192-cbc', 'aes256-cbc', '[EMAIL PROTECTED]', 'aes128-ctr', 'aes192-ctr', 'aes256-ctr'] server encrypt:['aes128- cbc', '3des-cbc', 'blowfish-cbc', 'cast128-cbc', 'arcfour128', 'arcfour256', 'arcfour', 'aes192-cbc', 'aes256-cbc', '[EMAIL PROTECTED] ', 'aes128-ctr', 'aes192-ctr', 'aes256-ctr'] client mac:['hmac-md5', 'hmac-sha1', '[EMAIL PROTECTED]', 'hmac-ripemd160', '[EMAIL PROTECTED] ', 'hmac-sha1-96', 'hmac-md5-96'] server mac:['hmac-md5', 'hmac-sha1', '[EMAIL PROTECTED] ', 'hmac-ripemd160', '[EMAIL PROTECTED]', 'hmac-sha1-96', 'hmac-md5-96'] client compress:['none', '[EMAIL PROTECTED]'] server compress:['none', '[EMAIL PROTECTED]'] client lang:[''] server lang: [''] kex follows?False DEB [20080417-12:57:43.913] thr=2 paramiko.transport: Ciphers agreed: local=aes128-cbc, remote=aes128-cbc DEB [20080417-12:57:43.914] thr=2 paramiko.transport: using kex diffie-hellman-group1-sha1; server key type ssh-rsa; cipher: local aes128-cbc, remote aes128-cbc; mac: local hmac-sha1, remote hmac-sha1; compression: local none, remote none DEB [20080417-12:57:44.138] thr=2 paramiko.transport: Switch to new keys ... DEB [20080417-12:57:44.185] thr=2 paramiko.transport: userauth is OK INF [20080417-12:57:44.188] thr=2 paramiko.transport: Authentication type (password) not permitted. DEB [20080417-12:57:44.189] thr=2 paramiko.transport: Allowed methods: ['publickey', 'keyboard-interactive'] DEB [20080417-12:57:44.211] thr=2 paramiko.transport: userauth is OK INF [20080417-12:57:44.221] thr=2 paramiko.transport: Authentication (keyboard-interactive) successful! DEB [20080417-12:57:44.230] thr=3 paramiko.transport.1: Max packet in: 34816 bytes DEB [20080417-12:57:44.233] thr=2 paramiko.transport.1: Max packet out: 32768 bytes INF [20080417-12:57:44.233] thr=2 paramiko.transport: Secsh channel 1 opened. DEB [20080417-12:57:44.239] thr=2 paramiko.transport.1: Sesch chann
Re: [convirt-users] Convirt 0.8.2; Connecting to console: "xenconsole: could not read tty from store. No such file or directory"
This is resolved. I did not fuly read through the "Prerequisites" section and did not have "vncviewer" installed. It is now installed and all is good. -Alan - This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] Convirt 0.8.2; Connecting to console: "xenconsole: could not read tty from store. No such file or directory"
Hi There, I just "installed" ConVirt 0.8.2 on a fresh Ubuntu Server 7.10 box. I am able to provision a VM just fine and it appears to start just fine as well. When I attempt to connect to the console, however, I get the error indicated in the subject line. The VM was provisioned as an HVM and is booing off of an ISO image, so I need to go through some installation steps to install the VM. I have included my config file for the VM below. Please le tme know what I have missed... I look forward to hearing from you. TIA! -Alan --- START --- # Automtically generated by ConVirt import os, re arch = os.uname()[4] if re.search('64', arch): arch_libdir = 'lib64' else: arch_libdir = 'lib' name='fw01' kernel='/usr/lib/xen/boot/hvmloader' builder='hvm' memory=256 shadow_memory=10 #vcpus=1# number of vcpu's #cpus = "0" # all vcpus run on CPU0 pae=0 acpi=0 apic=0 vif=['mac=00:16:3e:17:26:e6, bridge=xenbr0','mac=00:16:3e:17:26:a6, bridge=xenbr1'] disk=['file:/vmfs/iso/pfSense-1.2-LiveCD-Installer.iso,hdc:cdrom,r', 'file:/vmfs/volumes/storage1/fw01/fw01_sda.vdk,hda,w'] device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm' # Boots from CDROM. # Change to 'c' after Linux installation in order to boot from disk. boot='d' #boot='c' sdl=0 vnc=1 vncunused=1 stdvga=0 extra='' on_reboot='restart' on_shutdown='destroy' ramdisk='' image_name='Linux_CD_Install' on_crash='destroy' bootloader='' vcpus=1 root='' image_conf='/vmfs/downloads/convirt-0.8.2/log/image_store/Linux_CD_Install/Linux_CD_Install_fw01_image.conf' --- END --- - This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] convirt patch for paramiko
jd a écrit : > The bugs are fixed in the paramiko code >=1.7.2. For > previous version, the convirt includes patchtes with > its distribution. > > So if you are using 1.7.2, the patch is not required. Indeed, I confused the file to compare... Thanks for the clarification. -- Guillaume Rousse Moyens Informatiques - INRIA Futurs Tel: 01 69 35 69 62 - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] convirt patch for paramiko
Hi Guillaume, Good to know that you are working on ConVirt package for Madriva. If not already registered, kindly register on convirt-packaging mailing list, and let us know about the progress. Thanks. /Jd --- Guillaume Rousse <[EMAIL PROTECTED]> wrote: > Hello. > > I recently introduced convirt in mandriva contrib > packages. It seems > convirt need a patched version of paramiko to works > correctly (see > https://qa.mandriva.com/show_bug.cgi?id=38739 for > discussion and the 1.7.2 patch). > > I'm relunctant to modify a package of the > distribution just because > another package need it, especially as I can't judge > of its effect. I > even wonder if this patch has ever been submitted to > paramiko > maintainers ? Merging it upstream would solve the > issue for everyone. > -- > Guillaume Rousse > Moyens Informatiques - INRIA Futurs > Tel: 01 69 35 69 62 > > > - > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio > 2008. > http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ > ___ > XenMan-Users mailing list > XenMan-Users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xenman-users > Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] convirt patch for paramiko
The bugs are fixed in the paramiko code >=1.7.2. For previous version, the convirt includes patchtes with its distribution. So if you are using 1.7.2, the patch is not required. /jd --- Guillaume Rousse <[EMAIL PROTECTED]> wrote: > Hello. > > I recently introduced convirt in mandriva contrib > packages. It seems > convirt need a patched version of paramiko to works > correctly (see > https://qa.mandriva.com/show_bug.cgi?id=38739 for > discussion and the 1.7.2 patch). > > I'm relunctant to modify a package of the > distribution just because > another package need it, especially as I can't judge > of its effect. I > even wonder if this patch has ever been submitted to > paramiko > maintainers ? Merging it upstream would solve the > issue for everyone. > -- > Guillaume Rousse > Moyens Informatiques - INRIA Futurs > Tel: 01 69 35 69 62 > > > - > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio > 2008. > http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ > ___ > XenMan-Users mailing list > XenMan-Users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xenman-users > Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] convirt patch for paramiko
Hello. I recently introduced convirt in mandriva contrib packages. It seems convirt need a patched version of paramiko to works correctly (see https://qa.mandriva.com/show_bug.cgi?id=38739 for discussion and the 1.7.2 patch). I'm relunctant to modify a package of the distribution just because another package need it, especially as I can't judge of its effect. I even wonder if this patch has ever been submitted to paramiko maintainers ? Merging it upstream would solve the issue for everyone. -- Guillaume Rousse Moyens Informatiques - INRIA Futurs Tel: 01 69 35 69 62 - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] ConVirt 0.8.2 Released
Hi We are pleased to announce the availability of ConVirt version 0.8.2. The release includes : * Xen 3.2 Support * Critical Bug Fixes * Automatic Announcements for Updates * RPM for the SUSE platform Visit http://www.convirt.net for details and downloading the product. Thanks /Jd Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] ConVirt 0.8.1 + CentOS 5.1: "Exception: Unknown type (null)"
Sorry. Here are the two relavant urls. This one is for 5.0. http://rhn.redhat.com/errata/RHBA-2008-0079.html This might be useful. https://bugzilla.redhat.com/show_bug.cgi?id=237077 /Jd --- jd <[EMAIL PROTECTED]> wrote: > Hi > > I found this patch for RHEL5. See if you can find > the > one for RHEL5.1. > > Please let us know if this works out for you. > Thanks > /Jd > > > --- Alan Murrell <[EMAIL PROTECTED]> wrote: > > > Thank you for your reply, JD. > > > > jd wrote: > > > Hi > > > We have tested the CentOS 5.1 as server > platform > > not > > > as a client. > > > > > That is fair enough; I thought, afterwards, that > > that might be the > > case. Since I will likely be connecting to it > > remotely anyway to do the > > management, then that should not necessarily be an > > issue. I did not get > > a chance to test the re-install from my Kubuntu > > laptop, but the fact > > that after the re-install on the local CentOS > > machine I was able to at > > least create a "localhost" server (whereas before > I > > could not) is a good > > indication. I will test this when I get back to > the > > office in the > > morning. (Yes, I was still getting the "Unknown > > type (null)" error > > whenever I tried to click on any of the objects) > > > You should use 3.0 version of the script if it > is > > > vanilla CentOS 5.1. > > > > > OK, noted. I ran the xen-3.1 stuff; if I run the > > xen-3.0, will it > > replace the changes it made? I think it made a > > backup of the > > xend-config.sxp file in '/etc/xen', so I probably > > just need to put that > > back in place and re-run the xend-config.sh script > > for xen-3.0? > > > But it seems you have installed xen 3.2 is that > > > correct ? > > > > > Not anymore. I re-installed the system and am > using > > the CentOS 5.1 > > provided packages. > > > Please pass on the following info > > > -- xm info > > > -- xend-config.sxp file. > > > -- netstat -an | grep LISTEN > > > -- check that firewalls are turned off (for > > testing) > > > > > I will pass that along when I get in to the office > > int he AM. If this > > can help make the client run better on CentOS 5.1, > > then I am glad to > > help, and be your guinea pig :-) > > > -- For running ConVirt on 5.1 I think you are > > > running in to pygtk problem. See if you can get > a > > > patch or upgrade. > > > > I will see if I can do that. Thanks for the tip! > > > > -Alan M. > > > > > > > > > > Never miss a thing. Make Yahoo your home page. > http://www.yahoo.com/r/hs > Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] ConVirt 0.8.1 + CentOS 5.1: "Exception: Unknown type (null)"
Hi I found this patch for RHEL5. See if you can find the one for RHEL5.1. Please let us know if this works out for you. Thanks /Jd --- Alan Murrell <[EMAIL PROTECTED]> wrote: > Thank you for your reply, JD. > > jd wrote: > > Hi > > We have tested the CentOS 5.1 as server platform > not > > as a client. > > > That is fair enough; I thought, afterwards, that > that might be the > case. Since I will likely be connecting to it > remotely anyway to do the > management, then that should not necessarily be an > issue. I did not get > a chance to test the re-install from my Kubuntu > laptop, but the fact > that after the re-install on the local CentOS > machine I was able to at > least create a "localhost" server (whereas before I > could not) is a good > indication. I will test this when I get back to the > office in the > morning. (Yes, I was still getting the "Unknown > type (null)" error > whenever I tried to click on any of the objects) > > You should use 3.0 version of the script if it is > > vanilla CentOS 5.1. > > > OK, noted. I ran the xen-3.1 stuff; if I run the > xen-3.0, will it > replace the changes it made? I think it made a > backup of the > xend-config.sxp file in '/etc/xen', so I probably > just need to put that > back in place and re-run the xend-config.sh script > for xen-3.0? > > But it seems you have installed xen 3.2 is that > > correct ? > > > Not anymore. I re-installed the system and am using > the CentOS 5.1 > provided packages. > > Please pass on the following info > > -- xm info > > -- xend-config.sxp file. > > -- netstat -an | grep LISTEN > > -- check that firewalls are turned off (for > testing) > > > I will pass that along when I get in to the office > int he AM. If this > can help make the client run better on CentOS 5.1, > then I am glad to > help, and be your guinea pig :-) > > -- For running ConVirt on 5.1 I think you are > > running in to pygtk problem. See if you can get a > > patch or upgrade. > > I will see if I can do that. Thanks for the tip! > > -Alan M. > > Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] ConVirt 0.8.1 + CentOS 5.1: "Exception: Unknown type (null)"
I think the port changed from 8005 to 8006 since Xen 3.0.4 onwards. /Jd --- Brecht Sanders <[EMAIL PROTECTED]> wrote: > Hi, > Yesterday I was trying convirt 0.8.1 on win32, > trying to connect to xen > 3.0.3-1 on Debian Etch. > I ran into pretty much the same problem: there is no > port 8006 being > listened on by Xen (I checked with netstat -na). > Isn't the RPC port > 8005, or is it not using the Xen RPC server? > I tried using port 8005 but I still got connection > refused, even though > netstat showed a connection established to port 8005 > for a moment... > Also, there is an option to connect directly with > TCP (no SSH). However, > I didn't find how Xen can be made to bind to all > interfaces (not just > loopback/localhost). Is this possible (or maybe only > newer versions ox Xen)? > Regards > Brecht > > jd wrote: > > Hi > > We have tested the CentOS 5.1 as server platform > not > > as a client. > > > > You should use 3.0 version of the script if it is > > vanilla CentOS 5.1. > > > > But it seems you have installed xen 3.2 is that > > correct ? > > Please pass on the following info > > -- xm info > > -- xend-config.sxp file. > > -- netstat -an | grep LISTEN > > -- check that firewalls are turned off (for > testing) > > > > > > -- For running ConVirt on 5.1 I think you are > > running in to pygtk problem. See if you can get a > > patch or upgrade. > > > > > https://launchpad.net/ubuntu/+source/revelation/+bug/56744 > > > > /Jd > > > > > > > > --- [EMAIL PROTECTED] wrote: > > > > > >> Hello, > >> > >> I have the following installed: > >> > >> - CentOS 5.1 + CentOS "Virtualization" packages > >> - Xen 3.2 CentOS/RHEL RPM from > >> - gtk2-2.10.4-19.el5, pygtk2-2.10.1-8.el5 (most > up > >> to date for the distro) > >> - ConVirt 0.8.1 > >> > >> After installation of ConVirt, I have run the the > >> following scripts, per > >> the "manual": > >> > >> > >> > >> > > > /usr/share/convirt/config-scripts/xen-3.1/configure-xend.sh > > > >> /usr/share/convirt/patches/patch_paramiko' > >> scripts. > >> > >> I am able to start ConVirt OK, but whenever I try > to > >> do anything, I get > >> the following error running locally (as root): > >> > >> Exception: Unknown type (null) > >> > >> The problem is the same with both the RPM and > >> tarball versions. I am also > >> not able to connect to the server from the > ConVirt > >> 0.8.1 client installed > >> on my Kubuntu laptop (using the tarball > download); I > >> get the following > >> error when I try to add the server: > >> > >> 111, 'Connection refused' > >> > >> I do not see port 8006 (or anything even > mentioning > >> 'xend') when I do a > >> 'netstat' command (nor 'netstat -l') > >> > >> I am thinking my problem may be one or more of > the > >> following: > >> > >> 1.) Running Xen 3.2, which may not be supported > >> yet (i.e., the > >> "configure-xend.sh" script for Xen 3.1 does not > do > >> what it needs to do > >> for Xen 3.2) This may or may not also be the > reason > >> I cannot connect > >> from my laptop > >> 2.) CentOS 5.1 does not have the proper version > of > >> GTK libraries that > >> ConVirt needs to run > >> > >> To eliminate possibility #1 (at least as far as > the > >> "Unknown type" > >> errors), I am planning to re-install CentOS 5.1 > (I > >> just did an install > >> earlier, so I am not losing any VMs or anything) > and > >> will use the CentOS > >> "virtualization" packages and will do the "api" > >> adjustment in > >> '/etc/convirt.conf' as indicated in the manual. > >> > >> A couple of questions, however: > >> > >> 1.) When I use the CentOS 5.1 Xen packages and > >> such, which > >> 'configure-xend.sh' script do I use? The one for > >> 3.1 or 3.0? I am > >> thinking 3.1, since that is what is apparently > >> installed with CentOS > >> 5.1, despite it saying that it's 3.0.3. > >>2.) Is anyone running ConVirt 5.1 successfully > on > >> CentOS 5.1? > >> > >> In the meantime, any additional advice or info > you > >> need, feel free to ask > >> and I will provide as best I can. > >> > >> TIA, > >> > >> -Alan M. > >> > >> > >> > >> > >> > > > - > > > >> This SF.net email is sponsored by: Microsoft > >> Defy all challenges. Microsoft(R) Visual Studio > >> 2008. > >> > >> > > > http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ > > > >> ___ > >> XenMan-Users mailing list > >> XenMan-Users@lists.sourceforge.net > >> > >> > > > https://lists.sourceforge.net/lists/listinfo/xenman-users > > > > > > > > > > > > > Be a better friend, newshound, and > > know-it-all with Yahoo! Mobile. Try it now. > http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ > > > > > > > > -
Re: [convirt-users] ConVirt 0.8.1 + CentOS 5.1: "Exception: Unknown type (null)"
Hi Brecht, Did you run the config script on the managed server as mentioned in the doc ? -- The script basically changes the config file. -- And patches one the xen server python files (that had a bug). These changes make Xend listen on all interfaces. Pass on the same set of details and I can take a look. /Jd --- Brecht Sanders <[EMAIL PROTECTED]> wrote: > Hi, > Yesterday I was trying convirt 0.8.1 on win32, > trying to connect to xen > 3.0.3-1 on Debian Etch. > I ran into pretty much the same problem: there is no > port 8006 being > listened on by Xen (I checked with netstat -na). > Isn't the RPC port > 8005, or is it not using the Xen RPC server? > I tried using port 8005 but I still got connection > refused, even though > netstat showed a connection established to port 8005 > for a moment... > Also, there is an option to connect directly with > TCP (no SSH). However, > I didn't find how Xen can be made to bind to all > interfaces (not just > loopback/localhost). Is this possible (or maybe only > newer versions ox Xen)? > Regards > Brecht > > jd wrote: > > Hi > > We have tested the CentOS 5.1 as server platform > not > > as a client. > > > > You should use 3.0 version of the script if it is > > vanilla CentOS 5.1. > > > > But it seems you have installed xen 3.2 is that > > correct ? > > Please pass on the following info > > -- xm info > > -- xend-config.sxp file. > > -- netstat -an | grep LISTEN > > -- check that firewalls are turned off (for > testing) > > > > > > -- For running ConVirt on 5.1 I think you are > > running in to pygtk problem. See if you can get a > > patch or upgrade. > > > > > https://launchpad.net/ubuntu/+source/revelation/+bug/56744 > > > > /Jd > > > > > > > > --- [EMAIL PROTECTED] wrote: > > > > > >> Hello, > >> > >> I have the following installed: > >> > >> - CentOS 5.1 + CentOS "Virtualization" packages > >> - Xen 3.2 CentOS/RHEL RPM from > >> - gtk2-2.10.4-19.el5, pygtk2-2.10.1-8.el5 (most > up > >> to date for the distro) > >> - ConVirt 0.8.1 > >> > >> After installation of ConVirt, I have run the the > >> following scripts, per > >> the "manual": > >> > >> > >> > >> > > > /usr/share/convirt/config-scripts/xen-3.1/configure-xend.sh > > > >> /usr/share/convirt/patches/patch_paramiko' > >> scripts. > >> > >> I am able to start ConVirt OK, but whenever I try > to > >> do anything, I get > >> the following error running locally (as root): > >> > >> Exception: Unknown type (null) > >> > >> The problem is the same with both the RPM and > >> tarball versions. I am also > >> not able to connect to the server from the > ConVirt > >> 0.8.1 client installed > >> on my Kubuntu laptop (using the tarball > download); I > >> get the following > >> error when I try to add the server: > >> > >> 111, 'Connection refused' > >> > >> I do not see port 8006 (or anything even > mentioning > >> 'xend') when I do a > >> 'netstat' command (nor 'netstat -l') > >> > >> I am thinking my problem may be one or more of > the > >> following: > >> > >> 1.) Running Xen 3.2, which may not be supported > >> yet (i.e., the > >> "configure-xend.sh" script for Xen 3.1 does not > do > >> what it needs to do > >> for Xen 3.2) This may or may not also be the > reason > >> I cannot connect > >> from my laptop > >> 2.) CentOS 5.1 does not have the proper version > of > >> GTK libraries that > >> ConVirt needs to run > >> > >> To eliminate possibility #1 (at least as far as > the > >> "Unknown type" > >> errors), I am planning to re-install CentOS 5.1 > (I > >> just did an install > >> earlier, so I am not losing any VMs or anything) > and > >> will use the CentOS > >> "virtualization" packages and will do the "api" > >> adjustment in > >> '/etc/convirt.conf' as indicated in the manual. > >> > >> A couple of questions, however: > >> > >> 1.) When I use the CentOS 5.1 Xen packages and > >> such, which > >> 'configure-xend.sh' script do I use? The one for > >> 3.1 or 3.0? I am > >> thinking 3.1, since that is what is apparently > >> installed with CentOS > >> 5.1, despite it saying that it's 3.0.3. > >>2.) Is anyone running ConVirt 5.1 successfully > on > >> CentOS 5.1? > >> > >> In the meantime, any additional advice or info > you > >> need, feel free to ask > >> and I will provide as best I can. > >> > >> TIA, > >> > >> -Alan M. > >> > >> > >> > >> > >> > > > - > > > >> This SF.net email is sponsored by: Microsoft > >> Defy all challenges. Microsoft(R) Visual Studio > >> 2008. > >> > >> > > > http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ > > > >> ___ > >> XenMan-Users mailing list > >> XenMan-Users@lists.sourceforge.net > >> > >> > > > https://lists.sourceforge.net/lists/listinfo/xenman-users > > > > > > > > > > >
Re: [convirt-users] ConVirt 0.8.1 + CentOS 5.1: "Exception: Unknown type (null)"
Hi, Yesterday I was trying convirt 0.8.1 on win32, trying to connect to xen 3.0.3-1 on Debian Etch. I ran into pretty much the same problem: there is no port 8006 being listened on by Xen (I checked with netstat -na). Isn't the RPC port 8005, or is it not using the Xen RPC server? I tried using port 8005 but I still got connection refused, even though netstat showed a connection established to port 8005 for a moment... Also, there is an option to connect directly with TCP (no SSH). However, I didn't find how Xen can be made to bind to all interfaces (not just loopback/localhost). Is this possible (or maybe only newer versions ox Xen)? Regards Brecht jd wrote: > Hi > We have tested the CentOS 5.1 as server platform not > as a client. > > You should use 3.0 version of the script if it is > vanilla CentOS 5.1. > > But it seems you have installed xen 3.2 is that > correct ? > Please pass on the following info > -- xm info > -- xend-config.sxp file. > -- netstat -an | grep LISTEN > -- check that firewalls are turned off (for testing) > > > -- For running ConVirt on 5.1 I think you are > running in to pygtk problem. See if you can get a > patch or upgrade. > > https://launchpad.net/ubuntu/+source/revelation/+bug/56744 > > /Jd > > > > --- [EMAIL PROTECTED] wrote: > > >> Hello, >> >> I have the following installed: >> >> - CentOS 5.1 + CentOS "Virtualization" packages >> - Xen 3.2 CentOS/RHEL RPM from >> - gtk2-2.10.4-19.el5, pygtk2-2.10.1-8.el5 (most up >> to date for the distro) >> - ConVirt 0.8.1 >> >> After installation of ConVirt, I have run the the >> following scripts, per >> the "manual": >> >> >> >> > /usr/share/convirt/config-scripts/xen-3.1/configure-xend.sh > >> /usr/share/convirt/patches/patch_paramiko' >> scripts. >> >> I am able to start ConVirt OK, but whenever I try to >> do anything, I get >> the following error running locally (as root): >> >> Exception: Unknown type (null) >> >> The problem is the same with both the RPM and >> tarball versions. I am also >> not able to connect to the server from the ConVirt >> 0.8.1 client installed >> on my Kubuntu laptop (using the tarball download); I >> get the following >> error when I try to add the server: >> >> 111, 'Connection refused' >> >> I do not see port 8006 (or anything even mentioning >> 'xend') when I do a >> 'netstat' command (nor 'netstat -l') >> >> I am thinking my problem may be one or more of the >> following: >> >> 1.) Running Xen 3.2, which may not be supported >> yet (i.e., the >> "configure-xend.sh" script for Xen 3.1 does not do >> what it needs to do >> for Xen 3.2) This may or may not also be the reason >> I cannot connect >> from my laptop >> 2.) CentOS 5.1 does not have the proper version of >> GTK libraries that >> ConVirt needs to run >> >> To eliminate possibility #1 (at least as far as the >> "Unknown type" >> errors), I am planning to re-install CentOS 5.1 (I >> just did an install >> earlier, so I am not losing any VMs or anything) and >> will use the CentOS >> "virtualization" packages and will do the "api" >> adjustment in >> '/etc/convirt.conf' as indicated in the manual. >> >> A couple of questions, however: >> >> 1.) When I use the CentOS 5.1 Xen packages and >> such, which >> 'configure-xend.sh' script do I use? The one for >> 3.1 or 3.0? I am >> thinking 3.1, since that is what is apparently >> installed with CentOS >> 5.1, despite it saying that it's 3.0.3. >>2.) Is anyone running ConVirt 5.1 successfully on >> CentOS 5.1? >> >> In the meantime, any additional advice or info you >> need, feel free to ask >> and I will provide as best I can. >> >> TIA, >> >> -Alan M. >> >> >> >> >> > - > >> This SF.net email is sponsored by: Microsoft >> Defy all challenges. Microsoft(R) Visual Studio >> 2008. >> >> > http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ > >> ___ >> XenMan-Users mailing list >> XenMan-Users@lists.sourceforge.net >> >> > https://lists.sourceforge.net/lists/listinfo/xenman-users > > > > > > > Be a better friend, newshound, and > know-it-all with Yahoo! Mobile. Try it now. > http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ > > > - > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ > ___ > XenMan-Users mailing list > XenMan-Users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xenman-users > > > > - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(
Re: [convirt-users] ConVirt 0.8.1 + CentOS 5.1: "Exception: Unknown type (null)"
Hi We have tested the CentOS 5.1 as server platform not as a client. You should use 3.0 version of the script if it is vanilla CentOS 5.1. But it seems you have installed xen 3.2 is that correct ? Please pass on the following info -- xm info -- xend-config.sxp file. -- netstat -an | grep LISTEN -- check that firewalls are turned off (for testing) -- For running ConVirt on 5.1 I think you are running in to pygtk problem. See if you can get a patch or upgrade. https://launchpad.net/ubuntu/+source/revelation/+bug/56744 /Jd --- [EMAIL PROTECTED] wrote: > Hello, > > I have the following installed: > > - CentOS 5.1 + CentOS "Virtualization" packages > - Xen 3.2 CentOS/RHEL RPM from > - gtk2-2.10.4-19.el5, pygtk2-2.10.1-8.el5 (most up > to date for the distro) > - ConVirt 0.8.1 > > After installation of ConVirt, I have run the the > following scripts, per > the "manual": > > > /usr/share/convirt/config-scripts/xen-3.1/configure-xend.sh > /usr/share/convirt/patches/patch_paramiko' > scripts. > > I am able to start ConVirt OK, but whenever I try to > do anything, I get > the following error running locally (as root): > > Exception: Unknown type (null) > > The problem is the same with both the RPM and > tarball versions. I am also > not able to connect to the server from the ConVirt > 0.8.1 client installed > on my Kubuntu laptop (using the tarball download); I > get the following > error when I try to add the server: > > 111, 'Connection refused' > > I do not see port 8006 (or anything even mentioning > 'xend') when I do a > 'netstat' command (nor 'netstat -l') > > I am thinking my problem may be one or more of the > following: > > 1.) Running Xen 3.2, which may not be supported > yet (i.e., the > "configure-xend.sh" script for Xen 3.1 does not do > what it needs to do > for Xen 3.2) This may or may not also be the reason > I cannot connect > from my laptop > 2.) CentOS 5.1 does not have the proper version of > GTK libraries that > ConVirt needs to run > > To eliminate possibility #1 (at least as far as the > "Unknown type" > errors), I am planning to re-install CentOS 5.1 (I > just did an install > earlier, so I am not losing any VMs or anything) and > will use the CentOS > "virtualization" packages and will do the "api" > adjustment in > '/etc/convirt.conf' as indicated in the manual. > > A couple of questions, however: > > 1.) When I use the CentOS 5.1 Xen packages and > such, which > 'configure-xend.sh' script do I use? The one for > 3.1 or 3.0? I am > thinking 3.1, since that is what is apparently > installed with CentOS > 5.1, despite it saying that it's 3.0.3. >2.) Is anyone running ConVirt 5.1 successfully on > CentOS 5.1? > > In the meantime, any additional advice or info you > need, feel free to ask > and I will provide as best I can. > > TIA, > > -Alan M. > > > > - > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio > 2008. > http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ > ___ > XenMan-Users mailing list > XenMan-Users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xenman-users > Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] ConVirt 0.8.1 + CentOS 5.1: "Exception: Unknown type (null)"
Hello, I have the following installed: - CentOS 5.1 + CentOS "Virtualization" packages - Xen 3.2 CentOS/RHEL RPM from - gtk2-2.10.4-19.el5, pygtk2-2.10.1-8.el5 (most up to date for the distro) - ConVirt 0.8.1 After installation of ConVirt, I have run the the following scripts, per the "manual": /usr/share/convirt/config-scripts/xen-3.1/configure-xend.sh /usr/share/convirt/patches/patch_paramiko' scripts. I am able to start ConVirt OK, but whenever I try to do anything, I get the following error running locally (as root): Exception: Unknown type (null) The problem is the same with both the RPM and tarball versions. I am also not able to connect to the server from the ConVirt 0.8.1 client installed on my Kubuntu laptop (using the tarball download); I get the following error when I try to add the server: 111, 'Connection refused' I do not see port 8006 (or anything even mentioning 'xend') when I do a 'netstat' command (nor 'netstat -l') I am thinking my problem may be one or more of the following: 1.) Running Xen 3.2, which may not be supported yet (i.e., the "configure-xend.sh" script for Xen 3.1 does not do what it needs to do for Xen 3.2) This may or may not also be the reason I cannot connect from my laptop 2.) CentOS 5.1 does not have the proper version of GTK libraries that ConVirt needs to run To eliminate possibility #1 (at least as far as the "Unknown type" errors), I am planning to re-install CentOS 5.1 (I just did an install earlier, so I am not losing any VMs or anything) and will use the CentOS "virtualization" packages and will do the "api" adjustment in '/etc/convirt.conf' as indicated in the manual. A couple of questions, however: 1.) When I use the CentOS 5.1 Xen packages and such, which 'configure-xend.sh' script do I use? The one for 3.1 or 3.0? I am thinking 3.1, since that is what is apparently installed with CentOS 5.1, despite it saying that it's 3.0.3. 2.) Is anyone running ConVirt 5.1 successfully on CentOS 5.1? In the meantime, any additional advice or info you need, feel free to ask and I will provide as best I can. TIA, -Alan M. - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] ConVirt-0.8.1 on CentOS5.1
You are most probably running in to https://launchpad.net/ubuntu/+source/revelation/+bug/56744 Which would require a pygtk upgrade to a newer version.!! OR see if u have FC or Ubuntu machine that can be used as a client. /Jd p.s. on my box python -c "import gtk; print gtk.gtk_version, gtk.pygtk_version" (2, 10, 13) (2, 10, 4) --- Pasquale DiGennaro <[EMAIL PROTECTED]> wrote: > [EMAIL PROTECTED] ~]$ python -c "import gtk; print > gtk.gtk_version, > gtk.pygtk_version" > (2, 10, 4) (2, 10, 1) > > packages are from centos5.1 official repository, > updated to the last version > available: > pygtk2-2.10.1-8.el5 > gtk2-2.10.4-19.el5 > > Thanks, > P- > > 2008/2/15, jd <[EMAIL PROTECTED]>: > > > > humm looks like pygtk/gtk issue. > > > > lets see what version of gtk/pygtk you have > > > > python -c "import gtk; print gtk.gtk_version, > > gtk.pygtk_version" > > > > > > > > /Jd > > > > --- Pasquale DiGennaro > <[EMAIL PROTECTED]> > > wrote: > > > > > Thanks for your help. > > > I'm trying to use CentOS as local distro. I'm > using > > > tarball 0.8.1. When I > > > click on "localhost" on the left menu I have an > > > exception. Here is the > > > content of convirt.log: > > > > > > > > > > > > > > [EMAIL PROTECTED] log]$ cat convirt.log > > > localhost remote = False tcp 22 key based auth = > > > False > > > {'convirt': > > > > > > 'http://www.convirture.com/catalogs/convirt_catalog.conf'} > > > src/convirt.py:898: GtkWarning: > > > gtk_tree_store_get_value: assertion > > > `VALID_ITER (iter, tree_store)' failed > > > return (treemodel.get_value(treeiter, 0), > > > Traceback (most recent call last): > > > File "src/convirt.py", line 2948, in > __callback > > > return Coordinator.handle_timer_callback() > > > File "src/convirt.py", line 1140, in > > > handle_timer_callback > > > cls.stateRefresh() > > > File "src/convirt.py", line 1291, in > stateRefresh > > > (name, node_type, managed_node, group) = > > > cls.get_selection() > > > File "src/convirt.py", line 1473, in > get_selection > > > return cls.nav.get_selection(path) > > > File "src/convirt.py", line 898, in > get_selection > > > return (treemodel.get_value(treeiter, 0), > > > File "/usr/lib/python2.4/warnings.py", line > 61, in > > > warn > > > warn_explicit(message, category, filename, > > > lineno, module, registry) > > > File "/usr/lib/python2.4/warnings.py", line > 82, in > > > warn_explicit > > > for item in filters: > > > TypeError: unknown type (null) > > > calling cb Expand node localhost > > > Valid, writable configuration found, using > > > /home/pask/convirt-0.8.1 > > > /convirt.conf > > > posting success cb Expand node localhost > > > thread done. Context Expand node localhost > > > Traceback (most recent call last): > > > File "src/convirt.py", line 501, in > > > lambda : > cb_suc_handle_row_expanded(treeview)) > > > File "src/convirt.py", line 485, in > > > cb_suc_handle_row_expanded > > > Coordinator.handle_nav_selection(treeview) > > > File "src/convirt.py", line 1076, in > > > handle_nav_selection > > > cls.stateRefresh() > > > File "src/convirt.py", line 1291, in > stateRefresh > > > (name, node_type, managed_node, group) = > > > cls.get_selection() > > > File "src/convirt.py", line 1473, in > get_selection > > > return cls.nav.get_selection(path) > > > File "src/convirt.py", line 898, in > get_selection > > > return (treemodel.get_value(treeiter, 0), > > > File "/usr/lib/python2.4/warnings.py", line > 61, in > > > warn > > > warn_explicit(message, category, filename, > > > lineno, module, registry) > > > File "/usr/lib/python2.4/warnings.py", line > 82, in > > > warn_explicit > > > for item in filters: > > > TypeError: unknown type (null > > > > > > > > -- > > > > > > P- > > > > > > 2008/2/15, jd <[EMAIL PROTECTED]>: > > > > > > > > -- Tarball or rpm ? > > > > -- local management or remote management. > > > > -- local distro, managed server(remote) > distro. > > > > -- Clicking on the left meaning, clicking on > the > > > arrow > > > > for localhost ? > > > > > > > > Level 1 > > > > --- > > > > Check out if there is an exception in the log > file > > > > when you do this. if so, pass them along. > > > > > > > > > > > > Level 2 > > > > --- > > > > For debugging this one. > > > > -- uncomment print_stack() call in function > > > cb_wrapper > > > > function in src/convirt.py > > > > -- In convirt.conf, change log_file=console, > now > > > the > > > > messages would appear in the window from where > you > > > > start ConVirt. > > > > -- restart ConVirt > > > > -- Try the op again and pass on the stack > trace > > > that > > > > comes in the window. > > > > > > > > /Jd > > > > > > > > --- Pasquale DiGennaro > > > <[EMAIL PRO
Re: [convirt-users] ConVirt-0.8.1 on CentOS5.1
[EMAIL PROTECTED] ~]$ python -c "import gtk; print gtk.gtk_version, gtk.pygtk_version" (2, 10, 4) (2, 10, 1) packages are from centos5.1 official repository, updated to the last version available: pygtk2-2.10.1-8.el5 gtk2-2.10.4-19.el5 Thanks, P- 2008/2/15, jd <[EMAIL PROTECTED]>: > > humm looks like pygtk/gtk issue. > > lets see what version of gtk/pygtk you have > > python -c "import gtk; print gtk.gtk_version, > gtk.pygtk_version" > > > > /Jd > > --- Pasquale DiGennaro <[EMAIL PROTECTED]> > wrote: > > > Thanks for your help. > > I'm trying to use CentOS as local distro. I'm using > > tarball 0.8.1. When I > > click on "localhost" on the left menu I have an > > exception. Here is the > > content of convirt.log: > > > > > > > > [EMAIL PROTECTED] log]$ cat convirt.log > > localhost remote = False tcp 22 key based auth = > > False > > {'convirt': > > > 'http://www.convirture.com/catalogs/convirt_catalog.conf'} > > src/convirt.py:898: GtkWarning: > > gtk_tree_store_get_value: assertion > > `VALID_ITER (iter, tree_store)' failed > > return (treemodel.get_value(treeiter, 0), > > Traceback (most recent call last): > > File "src/convirt.py", line 2948, in __callback > > return Coordinator.handle_timer_callback() > > File "src/convirt.py", line 1140, in > > handle_timer_callback > > cls.stateRefresh() > > File "src/convirt.py", line 1291, in stateRefresh > > (name, node_type, managed_node, group) = > > cls.get_selection() > > File "src/convirt.py", line 1473, in get_selection > > return cls.nav.get_selection(path) > > File "src/convirt.py", line 898, in get_selection > > return (treemodel.get_value(treeiter, 0), > > File "/usr/lib/python2.4/warnings.py", line 61, in > > warn > > warn_explicit(message, category, filename, > > lineno, module, registry) > > File "/usr/lib/python2.4/warnings.py", line 82, in > > warn_explicit > > for item in filters: > > TypeError: unknown type (null) > > calling cb Expand node localhost > > Valid, writable configuration found, using > > /home/pask/convirt-0.8.1 > > /convirt.conf > > posting success cb Expand node localhost > > thread done. Context Expand node localhost > > Traceback (most recent call last): > > File "src/convirt.py", line 501, in > > lambda : cb_suc_handle_row_expanded(treeview)) > > File "src/convirt.py", line 485, in > > cb_suc_handle_row_expanded > > Coordinator.handle_nav_selection(treeview) > > File "src/convirt.py", line 1076, in > > handle_nav_selection > > cls.stateRefresh() > > File "src/convirt.py", line 1291, in stateRefresh > > (name, node_type, managed_node, group) = > > cls.get_selection() > > File "src/convirt.py", line 1473, in get_selection > > return cls.nav.get_selection(path) > > File "src/convirt.py", line 898, in get_selection > > return (treemodel.get_value(treeiter, 0), > > File "/usr/lib/python2.4/warnings.py", line 61, in > > warn > > warn_explicit(message, category, filename, > > lineno, module, registry) > > File "/usr/lib/python2.4/warnings.py", line 82, in > > warn_explicit > > for item in filters: > > TypeError: unknown type (null > > > > -- > > > > P- > > > > 2008/2/15, jd <[EMAIL PROTECTED]>: > > > > > > -- Tarball or rpm ? > > > -- local management or remote management. > > > -- local distro, managed server(remote) distro. > > > -- Clicking on the left meaning, clicking on the > > arrow > > > for localhost ? > > > > > > Level 1 > > > --- > > > Check out if there is an exception in the log file > > > when you do this. if so, pass them along. > > > > > > > > > Level 2 > > > --- > > > For debugging this one. > > > -- uncomment print_stack() call in function > > cb_wrapper > > > function in src/convirt.py > > > -- In convirt.conf, change log_file=console, now > > the > > > messages would appear in the window from where you > > > start ConVirt. > > > -- restart ConVirt > > > -- Try the op again and pass on the stack trace > > that > > > comes in the window. > > > > > > /Jd > > > > > > --- Pasquale DiGennaro > > <[EMAIL PROTECTED]> > > > wrote: > > > > > > > > > > Hi all, > > > > I'm trying to get working ConVirt0.8.1 on > > CentOS5.1. > > > > After configuring Xen > > > > and paramiko and applying patches I'm able to > > start > > > > the GUI, but It's > > > > unusable: as soon as I click on the left menu I > > get > > > > a "Exception: unknown > > > > type (null)". Python installed is 2.4.3. > > > > > > > > Any help? > > > > > > > > Thanks a lot. > > > > > > > > P- > > > > > > > > > > > > > - > > > > This SF.net email is sponsored by: Microsoft > > > > Defy all challenges. Microsoft(R) Visual Studio > > > > 2008. > > > > > > > > > > http://clk.atdmt.
Re: [convirt-users] ConVirt-0.8.1 on CentOS5.1
humm looks like pygtk/gtk issue. lets see what version of gtk/pygtk you have python -c "import gtk; print gtk.gtk_version, gtk.pygtk_version" /Jd --- Pasquale DiGennaro <[EMAIL PROTECTED]> wrote: > Thanks for your help. > I'm trying to use CentOS as local distro. I'm using > tarball 0.8.1. When I > click on "localhost" on the left menu I have an > exception. Here is the > content of convirt.log: > > > [EMAIL PROTECTED] log]$ cat convirt.log > localhost remote = False tcp 22 key based auth = > False > {'convirt': > 'http://www.convirture.com/catalogs/convirt_catalog.conf'} > src/convirt.py:898: GtkWarning: > gtk_tree_store_get_value: assertion > `VALID_ITER (iter, tree_store)' failed > return (treemodel.get_value(treeiter, 0), > Traceback (most recent call last): > File "src/convirt.py", line 2948, in __callback > return Coordinator.handle_timer_callback() > File "src/convirt.py", line 1140, in > handle_timer_callback > cls.stateRefresh() > File "src/convirt.py", line 1291, in stateRefresh > (name, node_type, managed_node, group) = > cls.get_selection() > File "src/convirt.py", line 1473, in get_selection > return cls.nav.get_selection(path) > File "src/convirt.py", line 898, in get_selection > return (treemodel.get_value(treeiter, 0), > File "/usr/lib/python2.4/warnings.py", line 61, in > warn > warn_explicit(message, category, filename, > lineno, module, registry) > File "/usr/lib/python2.4/warnings.py", line 82, in > warn_explicit > for item in filters: > TypeError: unknown type (null) > calling cb Expand node localhost > Valid, writable configuration found, using > /home/pask/convirt-0.8.1 > /convirt.conf > posting success cb Expand node localhost > thread done. Context Expand node localhost > Traceback (most recent call last): > File "src/convirt.py", line 501, in > lambda : cb_suc_handle_row_expanded(treeview)) > File "src/convirt.py", line 485, in > cb_suc_handle_row_expanded > Coordinator.handle_nav_selection(treeview) > File "src/convirt.py", line 1076, in > handle_nav_selection > cls.stateRefresh() > File "src/convirt.py", line 1291, in stateRefresh > (name, node_type, managed_node, group) = > cls.get_selection() > File "src/convirt.py", line 1473, in get_selection > return cls.nav.get_selection(path) > File "src/convirt.py", line 898, in get_selection > return (treemodel.get_value(treeiter, 0), > File "/usr/lib/python2.4/warnings.py", line 61, in > warn > warn_explicit(message, category, filename, > lineno, module, registry) > File "/usr/lib/python2.4/warnings.py", line 82, in > warn_explicit > for item in filters: > TypeError: unknown type (null > -- > > P- > > 2008/2/15, jd <[EMAIL PROTECTED]>: > > > > -- Tarball or rpm ? > > -- local management or remote management. > > -- local distro, managed server(remote) distro. > > -- Clicking on the left meaning, clicking on the > arrow > > for localhost ? > > > > Level 1 > > --- > > Check out if there is an exception in the log file > > when you do this. if so, pass them along. > > > > > > Level 2 > > --- > > For debugging this one. > > -- uncomment print_stack() call in function > cb_wrapper > > function in src/convirt.py > > -- In convirt.conf, change log_file=console, now > the > > messages would appear in the window from where you > > start ConVirt. > > -- restart ConVirt > > -- Try the op again and pass on the stack trace > that > > comes in the window. > > > > /Jd > > > > --- Pasquale DiGennaro > <[EMAIL PROTECTED]> > > wrote: > > > > > > > Hi all, > > > I'm trying to get working ConVirt0.8.1 on > CentOS5.1. > > > After configuring Xen > > > and paramiko and applying patches I'm able to > start > > > the GUI, but It's > > > unusable: as soon as I click on the left menu I > get > > > a "Exception: unknown > > > type (null)". Python installed is 2.4.3. > > > > > > Any help? > > > > > > Thanks a lot. > > > > > > P- > > > > > > > > - > > > This SF.net email is sponsored by: Microsoft > > > Defy all challenges. Microsoft(R) Visual Studio > > > 2008. > > > > > > http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ > > > ___ > > > XenMan-Users mailing list > > > XenMan-Users@lists.sourceforge.net > > > > > > https://lists.sourceforge.net/lists/listinfo/xenman-users > > > > > > > > > > > > > > > > > > Looking for last minute shopping deals? > > Find them fast with Yahoo! Search. > > > http://tools.search.yahoo.com/newsearch/category.php?category=shopping > > > ---
Re: [convirt-users] ConVirt-0.8.1 on CentOS5.1
Thanks for your help. I'm trying to use CentOS as local distro. I'm using tarball 0.8.1. When I click on "localhost" on the left menu I have an exception. Here is the content of convirt.log: [EMAIL PROTECTED] log]$ cat convirt.log localhost remote = False tcp 22 key based auth = False {'convirt': 'http://www.convirture.com/catalogs/convirt_catalog.conf'} src/convirt.py:898: GtkWarning: gtk_tree_store_get_value: assertion `VALID_ITER (iter, tree_store)' failed return (treemodel.get_value(treeiter, 0), Traceback (most recent call last): File "src/convirt.py", line 2948, in __callback return Coordinator.handle_timer_callback() File "src/convirt.py", line 1140, in handle_timer_callback cls.stateRefresh() File "src/convirt.py", line 1291, in stateRefresh (name, node_type, managed_node, group) = cls.get_selection() File "src/convirt.py", line 1473, in get_selection return cls.nav.get_selection(path) File "src/convirt.py", line 898, in get_selection return (treemodel.get_value(treeiter, 0), File "/usr/lib/python2.4/warnings.py", line 61, in warn warn_explicit(message, category, filename, lineno, module, registry) File "/usr/lib/python2.4/warnings.py", line 82, in warn_explicit for item in filters: TypeError: unknown type (null) calling cb Expand node localhost Valid, writable configuration found, using /home/pask/convirt-0.8.1 /convirt.conf posting success cb Expand node localhost thread done. Context Expand node localhost Traceback (most recent call last): File "src/convirt.py", line 501, in lambda : cb_suc_handle_row_expanded(treeview)) File "src/convirt.py", line 485, in cb_suc_handle_row_expanded Coordinator.handle_nav_selection(treeview) File "src/convirt.py", line 1076, in handle_nav_selection cls.stateRefresh() File "src/convirt.py", line 1291, in stateRefresh (name, node_type, managed_node, group) = cls.get_selection() File "src/convirt.py", line 1473, in get_selection return cls.nav.get_selection(path) File "src/convirt.py", line 898, in get_selection return (treemodel.get_value(treeiter, 0), File "/usr/lib/python2.4/warnings.py", line 61, in warn warn_explicit(message, category, filename, lineno, module, registry) File "/usr/lib/python2.4/warnings.py", line 82, in warn_explicit for item in filters: TypeError: unknown type (null -- P- 2008/2/15, jd <[EMAIL PROTECTED]>: > > -- Tarball or rpm ? > -- local management or remote management. > -- local distro, managed server(remote) distro. > -- Clicking on the left meaning, clicking on the arrow > for localhost ? > > Level 1 > --- > Check out if there is an exception in the log file > when you do this. if so, pass them along. > > > Level 2 > --- > For debugging this one. > -- uncomment print_stack() call in function cb_wrapper > function in src/convirt.py > -- In convirt.conf, change log_file=console, now the > messages would appear in the window from where you > start ConVirt. > -- restart ConVirt > -- Try the op again and pass on the stack trace that > comes in the window. > > /Jd > > --- Pasquale DiGennaro <[EMAIL PROTECTED]> > wrote: > > > > Hi all, > > I'm trying to get working ConVirt0.8.1 on CentOS5.1. > > After configuring Xen > > and paramiko and applying patches I'm able to start > > the GUI, but It's > > unusable: as soon as I click on the left menu I get > > a "Exception: unknown > > type (null)". Python installed is 2.4.3. > > > > Any help? > > > > Thanks a lot. > > > > P- > > > > - > > This SF.net email is sponsored by: Microsoft > > Defy all challenges. Microsoft(R) Visual Studio > > 2008. > > > http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ > > ___ > > XenMan-Users mailing list > > XenMan-Users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/xenman-users > > > > > > > > > > Looking for last minute shopping deals? > Find them fast with Yahoo! Search. > http://tools.search.yahoo.com/newsearch/category.php?category=shopping > - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
Re: [convirt-users] ConVirt-0.8.1 on CentOS5.1
-- Tarball or rpm ? -- local management or remote management. -- local distro, managed server(remote) distro. -- Clicking on the left meaning, clicking on the arrow for localhost ? Level 1 --- Check out if there is an exception in the log file when you do this. if so, pass them along. Level 2 --- For debugging this one. -- uncomment print_stack() call in function cb_wrapper function in src/convirt.py -- In convirt.conf, change log_file=console, now the messages would appear in the window from where you start ConVirt. -- restart ConVirt -- Try the op again and pass on the stack trace that comes in the window. /Jd --- Pasquale DiGennaro <[EMAIL PROTECTED]> wrote: > Hi all, > I'm trying to get working ConVirt0.8.1 on CentOS5.1. > After configuring Xen > and paramiko and applying patches I'm able to start > the GUI, but It's > unusable: as soon as I click on the left menu I get > a "Exception: unknown > type (null)". Python installed is 2.4.3. > > Any help? > > Thanks a lot. > > P- > - > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio > 2008. > http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ > ___ > XenMan-Users mailing list > XenMan-Users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xenman-users > Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users
[convirt-users] ConVirt-0.8.1 on CentOS5.1
Hi all, I'm trying to get working ConVirt0.8.1 on CentOS5.1. After configuring Xen and paramiko and applying patches I'm able to start the GUI, but It's unusable: as soon as I click on the left menu I get a "Exception: unknown type (null)". Python installed is 2.4.3. Any help? Thanks a lot. P- - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ XenMan-Users mailing list XenMan-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xenman-users