emc-developers  

Messages by Thread

• • [Emc-developers] Bug#1023651: 2.9.0~pre0+git20221105.ffb6bda926-1.2 NMU: Fix build failure on arm and hppa Petter Reinholdtsen
  • [Emc-developers] Bug#1023651: marked as done (NMU: Fix build failure on arm and hppa) Debian Bug Tracking System
• [Emc-developers] linuxcnc_2.9.0~pre0+git20221105.ffb6bda926-1.2_source.changes ACCEPTED into unstable Debian FTP Masters
• [Emc-developers] Processing of linuxcnc_2.9.0~pre0+git20221105.ffb6bda926-1.2_source.changes Debian FTP Masters
• [Emc-developers] Fw: Attempt at RTAI and PREEMPT_RT (sort of off-topic) Alec Ari via Emc-developers
• [Emc-developers] 2.9-pre1 andy pugh
  • Re: [Emc-developers] 2.9-pre1 Hans Unzner
  • Re: [Emc-developers] 2.9-pre1 andy pugh
  • Re: [Emc-developers] 2.9-pre1 Chris Morley
  • Re: [Emc-developers] 2.9-pre1 andy pugh
  • Re: [Emc-developers] 2.9-pre1 Chris Morley
  • Re: [Emc-developers] 2.9-pre1 Hans Unzner
  • Re: [Emc-developers] 2.9-pre1 Chris Morley
  • Re: [Emc-developers] 2.9-pre1 Alec Ari via Emc-developers
  • Re: [Emc-developers] 2.9-pre1 andy pugh
  • Re: [Emc-developers] 2.9-pre1 Rod Webster
  • Re: [Emc-developers] 2.9-pre1 andy pugh
  • Re: [Emc-developers] 2.9-pre1 Rod Webster
  • Re: [Emc-developers] 2.9-pre1 Chris Morley
  • Re: [Emc-developers] 2.9-pre1 andy pugh
  • Re: [Emc-developers] 2.9-pre1 Alec Ari via Emc-developers
  • Re: [Emc-developers] 2.9-pre1 Small Shop Concepts
  • Re: [Emc-developers] 2.9-pre1 andy pugh
  • Re: [Emc-developers] 2.9-pre1 Alec Ari via Emc-developers
  • Re: [Emc-developers] 2.9-pre1 Rod Webster
  • Re: [Emc-developers] 2.9-pre1 gene heskett
  • Re: [Emc-developers] 2.9-pre1 Alec Ari via Emc-developers
  • Re: [Emc-developers] 2.9-pre1 andy pugh
  • Re: [Emc-developers] 2.9-pre1 Chris Morley
  • Re: [Emc-developers] 2.9-pre1 Hans Unzner
  • Re: [Emc-developers] 2.9-pre1 Chris Morley
  • [Emc-developers] Merge Strategy andy pugh
  • Re: [Emc-developers] Merge Strategy Chris Morley
  • Re: [Emc-developers] Merge Strategy Hans Unzner
  • Re: [Emc-developers] Merge Strategy Chris Morley
  • Re: [Emc-developers] Merge Strategy Steffen Möller
  • Re: [Emc-developers] Merge Strategy Chris Morley
  • Re: [Emc-developers] Merge Strategy Steffen Möller
  • Re: [Emc-developers] Merge Strategy Chris Morley
  • Re: [Emc-developers] Merge Strategy Sebastian Kuzminsky
  • Re: [Emc-developers] Merge Strategy Hans Unzner
  • Re: [Emc-developers] Merge Strategy Chris Morley
  • Re: [Emc-developers] Merge Strategy andy pugh
  • Re: [Emc-developers] Merge Strategy Chris Morley
  • Re: [Emc-developers] Merge Strategy andy pugh
  • Re: [Emc-developers] Merge Strategy Chris Morley
  • Re: [Emc-developers] Merge Strategy Steffen Möller
  • Re: [Emc-developers] Merge Strategy Chris Morley
• [Emc-developers] linuxcnc_2.9.0~pre0+git20221105.ffb6bda926-1.1_source.changes ACCEPTED into unstable Debian FTP Masters
• [Emc-developers] Processing of linuxcnc_2.9.0~pre0+git20221105.ffb6bda926-1.1_source.changes Debian FTP Masters
• [Emc-developers] RT preempt on Rockchip rk3328? Feral Engineer
  • Re: [Emc-developers] RT preempt on Rockchip rk3328? Bari
  • Re: [Emc-developers] RT preempt on Rockchip rk3328? Rod Webster
  • Re: [Emc-developers] RT preempt on Rockchip rk3328? Alec Ari via Emc-developers
• [Emc-developers] Bug#1001904: marked as done (mesaflash: Maintainer address bounces) Debian Bug Tracking System
• [Emc-developers] linuxcnc_2.9.0~pre0+git20221105.ffb6bda926-1_source.changes ACCEPTED into unstable Debian FTP Masters
• [Emc-developers] Processing of linuxcnc_2.9.0~pre0+git20221105.ffb6bda926-1_source.changes Debian FTP Masters
• [Emc-developers] mesaflash_3.4.6-1_source.changes ACCEPTED into unstable Debian FTP Masters
• [Emc-developers] Processing of mesaflash_3.4.6-1_source.changes Debian FTP Masters
• [Emc-developers] RTAI 5.3.3 Beta release for LinuxCNC (Needs testing, esp on Intel) Alec Ari via Emc-developers
  • Re: [Emc-developers] RTAI 5.3.3 Beta release for LinuxCNC (Needs testing, esp on Intel) Rainer Stelzer
  • Re: [Emc-developers] RTAI 5.3.3 Beta release for LinuxCNC (Needs testing, esp on Intel) Intel latency histo screenshots Rainer Stelzer
  • Re: [Emc-developers] RTAI 5.3.3 Beta release for LinuxCNC (Needs testing, esp on Intel) Intel latency histo screenshots Alec Ari via Emc-developers
• [Emc-developers] 2.9 release on Buster or ? andy pugh
• [Emc-developers] Problem with PNCConf and dpll Alan Condit
  • Re: [Emc-developers] Problem with PNCConf and dpll Chris Morley
• [Emc-developers] Hosting LinuxCNC Bullseye packages with non-distrib flag? Alec Ari via Emc-developers
  • Re: [Emc-developers] Hosting LinuxCNC Bullseye packages with non-distrib flag? andy pugh
  • Re: [Emc-developers] Hosting LinuxCNC Bullseye packages with non-distrib flag? Alec Ari via Emc-developers
• [Emc-developers] linuxcnc_2.9.0~pre0+git20221023.7a5beabae0-1_amd64.changes ACCEPTED into unstable Debian FTP Masters
• [Emc-developers] linuxcnc_2.9.0~pre0+git20221023.7a5beabae0-1_amd64.changes is NEW Debian FTP Masters
• [Emc-developers] Processing of linuxcnc_2.9.0~pre0+git20221023.7a5beabae0-1_amd64.changes Debian FTP Masters
• [Emc-developers] linuxcnc_2.9.0~pre0+git20221023.7a5beabae0-1_source.changes REJECTED Debian FTP Masters
• [Emc-developers] Processing of linuxcnc_2.9.0~pre0+git20221023.7a5beabae0-1_source.changes Debian FTP Masters
• [Emc-developers] RTAI support for kernel 5.4 works so far, pending musl/math test Alec Ari via Emc-developers
  • Re: [Emc-developers] RTAI support for kernel 5.4 works so far, pending musl/math test Steffen Moeller
  • Re: [Emc-developers] RTAI support for kernel 5.4 works so far, pending musl/math test andy pugh
  • Re: [Emc-developers] RTAI support for kernel 5.4 works so far, pending musl/math test Alec Ari via Emc-developers
  • Re: [Emc-developers] RTAI support for kernel 5.4 works so far, pending musl/math test andy pugh
  • Re: [Emc-developers] RTAI support for kernel 5.4 works so far, pending musl/math test Alec Ari via Emc-developers
  • Re: [Emc-developers] RTAI support for kernel 5.4 works so far, pending musl/math test Alec Ari via Emc-developers
  • Re: [Emc-developers] RTAI support for kernel 5.4 works so far, pending musl/math test Alec Ari via Emc-developers
  • Re: [Emc-developers] RTAI support for kernel 5.4 works so far, pending musl/math test Alec Ari via Emc-developers
  • Re: [Emc-developers] RTAI support for kernel 5.4 works so far, pending musl/math test Alec Ari via Emc-developers
  • Re: [Emc-developers] RTAI support for kernel 5.4 works so far, pending musl/math test gene heskett
  • Re: [Emc-developers] RTAI support for kernel 5.4 works so far, pending musl/math test Alec Ari via Emc-developers
  • Re: [Emc-developers] RTAI support for kernel 5.4 works so far, pending musl/math test Alec Ari via Emc-developers
  • Re: [Emc-developers] RTAI support for kernel 5.4 works so far, pending musl/math test Jon Elson
  • Re: [Emc-developers] RTAI support for kernel 5.4 works so far, pending musl/math test Alec Ari via Emc-developers
  • Re: [Emc-developers] RTAI support for kernel 5.4 works so far, pending musl/math test Jon Elson
  • Re: [Emc-developers] RTAI support for kernel 5.4 works so far, pending musl/math test Alec Ari via Emc-developers
• [Emc-developers] RTAI FPU re-write testing Alec Ari via Emc-developers
• [Emc-developers] LinuxCNC + LXRT (RTAI) results Alec Ari via Emc-developers
  • Re: [Emc-developers] LinuxCNC + LXRT (RTAI) results Alec Ari via Emc-developers
  • Re: [Emc-developers] LinuxCNC + LXRT (RTAI) results Alec Ari via Emc-developers
  • Re: [Emc-developers] LinuxCNC + LXRT (RTAI) results Thomas J Powderly
  • Re: [Emc-developers] LinuxCNC + LXRT (RTAI) results Alec Ari via Emc-developers
  • Re: [Emc-developers] LinuxCNC + LXRT (RTAI) results Thomas J Powderly
  • Re: [Emc-developers] LinuxCNC + LXRT (RTAI) results Alec Ari via Emc-developers
  • Re: [Emc-developers] LinuxCNC + LXRT (RTAI) results andy pugh
  • Re: [Emc-developers] LinuxCNC + LXRT (RTAI) results Alec Ari via Emc-developers
  • Re: [Emc-developers] LinuxCNC + LXRT (RTAI) results Alec Ari via Emc-developers
  • Re: [Emc-developers] LinuxCNC + LXRT (RTAI) results andy pugh
  • Re: [Emc-developers] LinuxCNC + LXRT (RTAI) results Alec Ari via Emc-developers
  • Re: [Emc-developers] LinuxCNC + LXRT (RTAI) results Nicklas SB Karlsson
• [Emc-developers] Question on status for joints (16) ? Johannes Fassotte
  • Re: [Emc-developers] Question on status for joints (16) ? andy pugh
• [Emc-developers] 2.8.4 install problems setting up network Thomas J Powderly
  • Re: [Emc-developers] 2.8.4 install problems setting up network Thomas J Powderly
• [Emc-developers] 2.8.4 md5sum Thomas J Powderly
  • Re: [Emc-developers] 2.8.4 md5sum andy pugh
• Re: [Emc-developers] LinuxCNC 2.8.2 Debian 10 Buster PREEMPT-RT ISO can't install Grub andy pugh
  • Re: [Emc-developers] LinuxCNC 2.8.2 Debian 10 Buster PREEMPT-RT ISO can't install Grub lcnc
  • Re: [Emc-developers] LinuxCNC 2.8.2 Debian 10 Buster PREEMPT-RT ISO can't install Grub Sam Sokolik
  • Re: [Emc-developers] LinuxCNC 2.8.2 Debian 10 Buster PREEMPT-RT ISO can't install Grub Rod Webster
  • Re: [Emc-developers] LinuxCNC 2.8.2 Debian 10 Buster PREEMPT-RT ISO can't install Grub lcnc
  • Re: [Emc-developers] LinuxCNC 2.8.2 Debian 10 Buster PREEMPT-RT ISO can't install Grub Alec Ari via Emc-developers
  • Re: [Emc-developers] LinuxCNC 2.8.2 Debian 10 Buster PREEMPT-RT ISO can't install Grub Alec Ari via Emc-developers
  • Re: [Emc-developers] LinuxCNC 2.8.2 Debian 10 Buster PREEMPT-RT ISO can't install Grub Rod Webster
  • Re: [Emc-developers] LinuxCNC 2.8.2 Debian 10 Buster PREEMPT-RT ISO can't install Grub Alec Ari via Emc-developers
  • Re: [Emc-developers] LinuxCNC 2.8.2 Debian 10 Buster PREEMPT-RT ISO can't install Grub Alec Ari via Emc-developers
• Re: [Emc-developers] [Emc-commit] [LinuxCNC/linuxcnc] 754933: first step to asciidoctor migration: Jérémie Tarot
  • Re: [Emc-developers] [Emc-commit] [LinuxCNC/linuxcnc] 754933: first step to asciidoctor migration: Hans Unzner
• [Emc-developers] Auto-start gscreen on pi4 Thaddeus Waldner
  • Re: [Emc-developers] Auto-start gscreen on pi4 Hans Unzner
  • Re: [Emc-developers] Auto-start gscreen on pi4 Stefan Freisei Muehlbacher
  • Re: [Emc-developers] Auto-start gscreen on pi4 Thaddeus Waldner
  • Re: [Emc-developers] Auto-start gscreen on pi4 Thaddeus Waldner
  • Re: [Emc-developers] Auto-start gscreen on pi4 Thaddeus Waldner
  • Re: [Emc-developers] Auto-start gscreen on pi4 Jérémie Tarot
• [Emc-developers] Merging 2.8 into Master andy pugh
  • Re: [Emc-developers] Merging 2.8 into Master Chris Morley
  • Re: [Emc-developers] Merging 2.8 into Master andy pugh
  • Re: [Emc-developers] Merging 2.8 into Master Chris Morley
  • Re: [Emc-developers] Merging 2.8 into Master Chris Morley
  • Re: [Emc-developers] Merging 2.8 into Master andy pugh
  • Re: [Emc-developers] Merging 2.8 into Master Chris Morley
  • Re: [Emc-developers] Merging 2.8 into Master Hans Unzner
  • Re: [Emc-developers] Merging 2.8 into Master andy pugh
  • Re: [Emc-developers] Merging 2.8 into Master Hans Unzner
  • Re: [Emc-developers] Merging 2.8 into Master Chris Morley
  • Re: [Emc-developers] Merging 2.8 into Master andy pugh
• [Emc-developers] bug (new?)in master gene heskett
  • Re: [Emc-developers] bug (new?)in master Alan Condit
  • Re: [Emc-developers] bug (new?)in master gene heskett
• [Emc-developers] WLO formatting andy pugh
• [Emc-developers] New ISO images for testing. andy pugh
• [Emc-developers] Time to split 2.9 and master? andy pugh
  • Re: [Emc-developers] Time to split 2.9 and master? Rod Webster
  • Re: [Emc-developers] Time to split 2.9 and master? Small Shop Concepts
  • Re: [Emc-developers] Time to split 2.9 and master? Phill Carter
  • Re: [Emc-developers] Time to split 2.9 and master? Alec Ari via Emc-developers
  • Re: [Emc-developers] Time to split 2.9 and master? Alec Ari via Emc-developers
  • Re: [Emc-developers] Time to split 2.9 and master? Chris Morley
  • Re: [Emc-developers] Time to split 2.9 and master? andy pugh
  • Re: [Emc-developers] Time to split 2.9 and master? Alec Ari via Emc-developers
  • Re: [Emc-developers] Time to split 2.9 and master? Chris Morley
  • Re: [Emc-developers] Time to split 2.9 and master? andy pugh
  • Re: [Emc-developers] Time to split 2.9 and master? Jérémie Tarot
  • Re: [Emc-developers] Time to split 2.9 and master? Jérémie Tarot
  • Re: [Emc-developers] Time to split 2.9 and master? Rod Webster
  • Re: [Emc-developers] Time to split 2.9 and master? Phill Carter
  • Re: [Emc-developers] Time to split 2.9 and master? Hans Unzner
  • Re: [Emc-developers] Time to split 2.9 and master? andy pugh
  • Re: [Emc-developers] Time to split 2.9 and master? Hans Unzner
  • Re: [Emc-developers] Time to split 2.9 and master? andy pugh
  • Re: [Emc-developers] Time to split 2.9 and master? Hans Unzner
  • Re: [Emc-developers] Time to split 2.9 and master? andy pugh
  • Re: [Emc-developers] Time to split 2.9 and master? Hans Unzner
  • Re: [Emc-developers] Time to split 2.9 and master? andy pugh
  • Re: [Emc-developers] Time to split 2.9 and master? Hans Unzner
• [Emc-developers] Possible 2.8.4 release this weekend andy pugh
  • Re: [Emc-developers] Possible 2.8.4 release this weekend John Thornton
  • Re: [Emc-developers] Possible 2.8.4 release this weekend Hans Unzner
  • Re: [Emc-developers] Possible 2.8.4 release this weekend Chris Morley
  • Re: [Emc-developers] Possible 2.8.4 release this weekend andy pugh
  • Re: [Emc-developers] Possible 2.8.4 release this weekend Chris Morley
  • Re: [Emc-developers] Possible 2.8.4 release this weekend Jérémie Tarot
• [Emc-developers] un-wanted pauses gene heskett
  • Re: [Emc-developers] un-wanted pauses andy pugh
  • Re: [Emc-developers] un-wanted pauses gene heskett
  • Re: [Emc-developers] un-wanted pauses Sam Sokolik
  • Re: [Emc-developers] un-wanted pauses Sam Sokolik
  • Re: [Emc-developers] un-wanted pauses gene heskett
  • Re: [Emc-developers] un-wanted pauses andy pugh
  • Re: [Emc-developers] un-wanted pauses gene heskett
  • Re: [Emc-developers] un-wanted pauses gene heskett
• [Emc-developers] G96 Constant surface speed, have to move some distance before active Nicklas SB Karlsson
  • Re: [Emc-developers] G96 Constant surface speed, have to move some distance before active Jérémie Tarot
  • Re: [Emc-developers] G96 Constant surface speed, have to move some distance before active Nicklas SB Karlsson
  • Re: [Emc-developers] G96 Constant surface speed, have to move some distance before active Jérémie Tarot
  • Re: [Emc-developers] G96 Constant surface speed, have to move some distance before active Feral Engineer
  • Re: [Emc-developers] G96 Constant surface speed, have to move some distance before active Jérémie Tarot
  • Re: [Emc-developers] G96 Constant surface speed, have to move some distance before active Feral Engineer
  • Re: [Emc-developers] G96 Constant surface speed, have to move some distance before active Jérémie Tarot
  • Re: [Emc-developers] G96 Constant surface speed, have to move some distance before active Nicklas SB Karlsson
  • Re: [Emc-developers] G96 Constant surface speed, have to move some distance before active gene heskett
  • Re: [Emc-developers] G96 Constant surface speed, have to move some distance before active andy pugh
  • Re: [Emc-developers] G96 Constant surface speed, have to move some distance before active andy pugh
  • Re: [Emc-developers] G96 Constant surface speed, have to move some distance before active Nicklas SB Karlsson

• Earlier messages
• Later messages