Mira wrote: > > Thanks for the remark, Peter. > > I used "wires" and placed "net labels". It's amazing > that I'm allowed to place parts with one and the same > ref. designators.
That's "feature", though annoying one. > OK. I placed a net label on the wire that had GND > power port connected expecting the name of the label > to change to GND but it didn't. Not in the Protel, sorry. > I decided to check what will happen if I place a net > label on top of two wires, which are crossing each > other but not connected. They didn't have any other > labels placed. ERC didn't catch it and the update PCB > didn't complain either. It just shorted those two > wires while on the schematic they are visibly not > connected. > Is this another feature? How may I prevent designers > for shorting nets this way? By not allowing them to place label in such a way. > Is there any way to prevent Protel from placing > duplicated ref. designators? I couldn't find one and treated it as a "feature". WBR, Yuriy. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[email protected] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
