Does anyone know how to create a new list here at UA.EDU's listserver?
I'm searching a place to host an AFP (Advanced Function Presentation) related
list.
There was one on Topia but it seems to be dead.
--
Peter Hunkeler
? With those the fonts used are specified on the
indivicual page. No PAGEDEFs are used.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
be analyzed
later.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
want to start tracing. There you enter TSO EXECUTIL TS and continue with
the application in REXX trace mode. Enter TSO EXECUTIL TE to stop tracing
again.
--
Peter Hunkeler
Von: Lizette Koehler stars...@mindspring.com An:
IBM-MAIN@LISTSERV.UA.EDU Betreff: Re: need pub to help
on
the command line of the old screen. This leads to the effect that I get a
invalid command when I switch back to the session I initiated the START from.
Any help on what might cause this is much appreciated.
--
Peter Hunkeler
I understand what this has to do with my problem. Its not where the
command line is, but that the command line does not get cleared.
Anyway, thanks for the ideas.
--
Peter Hunkeler
Von: Elardus Engelbrecht elardus.engelbre...@sita.co.za An:
IBM-MAIN@LISTSERV.UA.EDU Betreff
.
The C.E. wanted a telephone line so he could service the units
remotely; I had to educate management that that would allow
uncontrolled access to customer data.
True but not only related to the ERASE function. It applies to deleted
as well as non-deleted data.
--
Peter Hunkeler
NEW.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Am 09.04.2014 20:18, schrieb Tom Marchant:
That only lets you have two splits.
Not if you change SPLIT to SPLIT NEW.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
. That
field is documented as
520 (208) ADDRESS 4 PSAPCCAV - VIRTUAL ADDRESS OF PCCA
It loosk as if the PCCA had been moved to 31bit storage in z/OS V1.13.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access
-bit storage regardless of the
specification. If there is more than one processor, and DIAGxx permits
it, you'll have the LCCA and */_PCCA_/* in 31-bit storage.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive
Who'd have thought that the number of CPUs online would affect the default
virtual location of LCCA and PCCA?
Sometime there are reall funny costructs. However there sure must be a good
reason for this since code had to be written to handle it.
--
Peter Hunkeler
but to understand why the command
is not clear in the command line. Still investigating...
Thanks for your suggestions
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
you're happy with the code, add it to the SSI definition so that it
will be run automatically.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu
ROTFLOL
... and some blue berries for desert?
--
Peter Hunkeler
Eat bleu cheese?
In a message dated 5/1/2014 1:43:29 P.M. Central Daylight Time,
featse...@gmail.com writes:
Not sure what a bluetooth mouse would do
mixing up things?
--
Peter Hunkeler
Von: Tony Harminc t...@harminc.net An:
IBM-MAIN@LISTSERV.UA.EDU Betreff: Re: AT-TLS question Datum: 01.05.14 19:38
On 1 May 2014 07:48, Jim McAlpine jim.mcalp...@gmail.com wrote:
We have the need to encrypt messages sent from z/OS
TRY DAF on the CBTTAPE.ORG
or maybe file 019 FLSMFJOB?
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
. If one end does *not* know how to talk SSL, AT/TLS can jump in and
do the handshake and en/decryption on the non-SSL. On the SSL end, then the
traffic will be passed on to the application unchanged, i.e. encrypted.
I'll have to read about this in the appropriate doc.
--
Peter Hunkeler
you like. PFA is a system service. On z/OS UNIX,
such data is usually placed under /usr/lpp or the like.
autmount can also provide automatic mounting on other placed, if you like.
--
Peter Hunkeler
--
For IBM-MAIN subscribe
alone. This
is the number one feature I'm missing on other discussion fora.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM
from
non-extended format to extended format. Just to make sure I'm not missing an
option that would allow this operation: Is there one?
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
this:
I was curious if it was feasible to perform the task using DFDSS. That's why I
haven't YET tried AMS REPRO. Will consider this path next.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access
and comapred the outcome of a ls -alER, as well as some randomly chosen
files. This all compares equal, so I'm pretty sure the copy worked well.
The AMS copy of the 4GiB data set ran for only 6 minutes. A COPYTREE done
previously ran for some 45 minutes.
--
Peter Hunkeler
Working on some asm code I stumbled on an call to SVC 61. SVC 61 seems to be
service IKJEGS6A. Neither googling nor searching MVS and TSO manuals helped to
find what IKJEGS6A does. Can anyone help me with a pointer to some doc?
--
Peter Hunkeler
for the pointers--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
to
64-bit common virtual storage. It has it even on the title page: 64-bit
common.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
Section about JES and MVS commands in the online help explains the w: It
asks SDSF to wait for the full delay interval before messages are displayed.
The interval being specified via SET DELAY.
HTH--
Peter Hunkeler
not be active. What happens to the applocation. Will it
just fail? Would it depend on te programmer and whether he/she cared to handle
this situation in te application?
Thanks
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff
As documented in DFSMS Access Method Services for Catalogs:
SHAREOPTIONS(crossregion[ crosssystem]|1 3)
How annoying. There were times when I did better reading manuals. I was reading
the text forth and back, but missed the above. Thanks.
--
Peter Hunkeler
*all* of my Qs are
answered. Not sure whether this is why no further comments were posted.
The above only answers the Q about the defaults when *no* SHAREOPTIONS are
specified. I'm still interested to get help with my other Qs.
--
Peter Hunkeler
Initially posted on RACF-L (more by mistake tang by intention). Reposting here
with emphasis on the TSO mechanisms I'd like to get some deeper insight.
We're in the process of cleaning up our technical userids. There is a job
running a REXX under IKJEFT01 that is issuing MVS commands via TSO
to understand the internals (if not OCO :-)
We'll either find a way to use a 7 char userid in this case, or to use some
other mechanism to issue MVS commands.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive
.
Hope this resolves any misunderstanding. My appologies for the confusion my
nomenclature may have caused.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
it
needs the user to be authorized for TSOAUTH/CONSOLE. This check is however not
even tried when there is not valid TSO control block structure.
I assume the same is true for all TSO commands that require authorization via
TSOAUTH class profile.
--
Peter Hunkeler
Could you run it and share the results?
Will do.
--
Peter
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
at the 8th byte is 0.
The last 2 hex digits displayed will be the PSCBATR1 byte, and the rightmost
bit will be PSCBCNAU.
PSCBCNAU is off.
Thanks a lot for the insight, Bill
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff
this to be the reason it is not
set by OPEN. However, the JFCB should have the value from the DD or VTOC
(DSCB). You could try reading the JFCB.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
for existing data sets,
of course.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
You are thinking of the DCBLRECL field, not the block size field, and only
for QSAM GET.
I stand corrected. You're absolutely right.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions
There is a list called AFP-L where a lot of printing people are subscribed,
incl. Ricoh (former Infoprint) specialists. You may try there.
posting address: af...@listserv.uga.edu
admin address: lists...@listserv.uga.edu
--
Peter Hunkeler
-heartedness but of responsibility.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
can misused any of the trusted STCs, can't they?
Any thoughts or recommendations?
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
was not coming out clear. I was trying to find out if
there is a drawback in defining generic (especially TRUSTED) profiles in
STARTED provided that all PROCLIBS are proberly protected. Shouldn't have
mentioned HSM at all.
--
Peter Hunkeler
my posts in ignorance may have
caused.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
with the work but never got idle long enough (the 30 minutes period) to
end. If BPXP024I was written for each and every process, there were thousands
and thousands of BPCXP024I messages in those BPXASs filling your spool.
--
Peter Hunkeler
that other colleague did an ftp and his process was hosted by the BPXAS
that previously has been started on bevalf of IBMUSER.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
with UACC(NONE), then ACC(READ) should be given
to only those userids that need it, i.e. servers, not people. When access is
needed, the distinction is between NONE and READ. ALTER imples READ, so it is
the same.
--
Peter Hunkeler
.
But then, OMVS/Unix never really made sense to me.
It's not a question of whether it makes sense or not. It is an integral
part of z/OS and even system tasks (TCP/IP, DB2, IMS, etc., etc.)
make use of it. There is no way around it anymore.
--
Peter Hunkeler
describe, I guess that RDz might be using this call, and
that BPX.SERVER is defined on your system.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu
is in any of
the LPA libraries in addition to the ADCD...LINKLIB.
Just curios, because it still isn't clear why Barbara had no problem
with FTP on her V1.10 system.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive
job continues to run while all other are waiting again.
I have RTFM, and still think ENQ is FIFO. I have not found anything related to
GRS STAR mode that contradicts.
I have not followed GRS new lately. What am I missing?
--
Peter Hunkeler
=NO QSC=NO
ADDR SPACE ASTE=53E88C40
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM
The START command processor treats IEESYSAS as a special case...
I suspected something the like this. Thanks.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
I'm sorry to disturb you. I'm invesgating some forum formatting issues.
This line is prefixed with 10 blanks.
This line is prefixed with 5 blanks. And this part is prefixed by
10 blanks.
Last line begins on position1.
--
Peter Hunkeler
. If it doesn't,
the resulting false behaviour does not point you directly to
EATTR=OPT.
EATTR is another parameter set by the DataClass. Data sets with
EATTR=OPT do show this in ISPF's data set information panel.
Can you verify the EATTR settings in both DataClasses you mentioned?
--
Peter Hunkeler
://www.ibm.com/developerworks/rfe/execute?use_case=viewRfeCR_ID=60048
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
I will point out a textual error in the request. The fourth paragraph ...
Thanks, John. I don't seem to be able to edit the text, but I have just added a
comment to clarify this.
--Peter Hunkeler
--
For IBM-MAIN subscribe
Just my opinion, but since BASH is a port of open source software, I don't
think it can ever be incorporated into USS.
I thought IBM has been delivering BASH as part of AIX for over a decade now,
don't they?
--Peter Hunkeler
produced that many PER
interrupts, that slip processing was using more than the allowed 10% of system
time and disabled the slip.
What exactly does x% of system time mean? Is it a pecentage of the LPAR CP
capacity?
--
Peter Hunkeler
... So I guess that integrating BASH into the Ported Tools and including ...
I the requirement states: ... as part of z/OS ... or at least of the z/OS
Ported Tools package). I don't care, all I want is to be able to open a PMR and
get a fix if that is needed.
--Peter Hunkeler
No answer? Interesting! I was thinking this is one of the easier questions for
the experienced debuggers on the list.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
. That's why I was asking.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
? Is the system in a non-dispatchable
state? Is SPIN SLIH code serialized?
--Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
when
you start The initial process (job or STC).
Try using a 8 char jobname for your Apache and see if it helps.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
of the decision.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
will compromise z/OS security. [snip] ... I don't
know why the OP has this association in his mind.
It puzzles me what made you think so. Having BASH as part of a supported
package doesn't make it neither safer nor weaker. It just makes it a piece of
supported software.
--
Peter Hunkeler
haven't looked up SPACE parameter's syntax in decades, but for me, the second
subparameter always was primary, optionally secondary, and directory if needed,
all enclosed in paranthesis. The third subparameter is the optional keyword
RLSE.
--
Peter Hunkeler
out.
I'm not very fluent in using neither RMF, nor MAINVIEW. I'd like to find out
which AS is causing this AUX usage. Not that I'd currently think, we're in
touble. Just curious. Does anyone have some hints where to start?
--
Peter Hunkeler
. Then, it is documented that VIO pages will never be paged to
Flash.
Do you want 'snapshot' (with RMF II), interactive monitoring
Starting at an interval which shows 30% local page DS being used, I'd like to
find the address space(s), to which thsose pages belong.
--
Peter Hunkeler
If you have mainview, try: F pasname,*asm,total For more details: F
pasname,*HELP ASM
We do have MAINVIEW, but I'm just a beginner in finding my way around, so
please bear with me. Where would I enter these commands? MAINVIEW ISPF rejects
F
--Peter Hunkeler
on storage usage some
time back which caused massive page out to Flash which also caused migration
from Flash to AUX. Does this sound reasonable?
--Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access
system is owning its own mount. They do not talk to each other regarding file
system activity.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu
that is shared between USERIDs.
Try D OMVS,PID=ddd' where ddd is the *decimal* value corresponding
the pid show in *hex* in the response to the fuser command.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access
the value to the D OMVS,PID= command.
I'm sorry to have mislead you.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
* on the
far left. Note that this is the userid, not the uid that is associated with the
process (PID).
Do you have the BPX.DEFAULT.USER profile defined to class FACILITY? If so what
is the content of the APPLDATA field of this profile?
--Peter Hunkeler
not apply. What else
would allow a job to ignore MEMLIMIT?
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
in MEMLIMIT.
DFSORT can consume memory even if MEMLIMIT is applied. It would use
dataspaces or hiperspaces instead. Does the ulitility invoke DFSORT
under the cover?
Do you say that DFSORT will ignore MEMLIMIT?
--
Peter Hunkeler
Pretty sure that I read somewhere that DB2 has been written to ignore
memlimit.
Thanks. Will try to find this in DB2 docs.
--Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
in DB2.
I could not find anything related to the utility program DSNX9WLM regarding
MEMLIMIT. Waiting for an answer from my DB2 colleagues.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions
clearly states that
the job was using roughly 250G of *above the bar* storage. So MEMLIMIT was not
honoured.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
job under control. Just don't know how. Not good if
software whatsoever starts to override system controls.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
Isn't DSNX9WLM the program for DB2 Stored Procedures server address spaces?
And not a DB2 Utility program?
Yep, I wrote that in the initial post.
--Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access
, TSU and JOB can run UNIX work inside, but only fork() and
non-local spawn() will create OMVS type of WLM work units, and they all run
as STC in BPXAS STC address spaces.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff
clinent/server stuff, nor necessarily TSO user. You just define
a USERID with a proper OMVS segment and no TSO segment. This user will be able
to login to a UNIX shell via telnet/ssh/rlogin and do interactive work. These
adress spaces will also show up as STC.
--
Peter Hunkeler
)
when an APPC transaction is running inside.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
My old ROT was 2-3x the real memory on the LPAR. Now that we can have 16,
32, 64GB partitions, we're talking some real DASD here.
Multiply by 10. Two of our larger LPARs have 640GB each.
--
Peter Hunkeler
--
For IBM
anymore.
Aside from that, DF Sort and DB2 are two applications that I know are heavily
using above the bar (virtual) storage instead of data space or hiperspace
storage. DB2 permits itself to use 4TB of above the bar virtual (by overriding
any MEMLIMIT, as I only recently learned).
--
Peter
, extensive documentation has aways be one strength of z/OS (and it
predecesors). IBM should stop (silently) droping documentation.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
When did it last exist? I have V1R10 docs here and I don't see it.
I found one in the z/OS V1.1 bookshelf
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
I can't seem to remember what manual describes the header and footer messages
in the JES2 JESMSGLG data set. Does anyone know?
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
What are you trying to do?
Just curiosity. Got a hint offline. It's in the JES2 init tuning guide,
chapter 2, JES2 System Data Sets. I've been almost there, but then gave up too
early.
--
Peter Hunkeler
--
For IBM-MAIN
anyone know about such a solution?
Does anyone use one?
Does anyone use other processes?
We'd like to be able to argue with management about this idea.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access
Radoslaw, I'm 100% with you, but we need to get that (stupid) idea out of
management's heads again.so I need more that it's a stupid idea type of
arguments.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive
not.
Our Government ignored this and daylight saving was introduced. I admit it
would have been a funny situation to be a single small country not switching to
DST while all countries around us do.
--
Peter Hunkeler
--
For IBM
In the country that takes pride in being the world's oldest democracy? What
am I missing?
The reality? Sadly, it's not the only case.
--Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
Norbert,
Many thanks for link to the SAP offering (I intentionally didn't write
solution). Very interesting. But not applicable to z/OS
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
in the 21st century. Paul listed many of them
in an earlier post. This is just one more one cannot readily understand.
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
We would still need to explain why JOB A works while JOB B, based on JOB A,
isn't working.
How about posting the two JCLs?
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
use this to start.
I don't like this desing. The Websphere team should have written their own
specific startup program which would do nothing but starting Websphere.
Instead, we now got a general utility to run almost any (I know there are
limitations) program in key 2.
--
Peter Hunkeler
see that the data set has indeed be expanded as desired.
Has anyone already tried this? What am I missing?
--
Peter Hunkeler
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists
1 - 100 of 918 matches
Mail list logo