In progress :)
I was going to hold off announcing this until we were sure it was going to
work, since the 'mechanical issues' we're working through are a side effect
of this, and I'm confident but not 100% sure we're close to solving them.
But since it was brought up I'll give a bit of a
Drool … can’t wait! There’s an IMAX theatre near me that I really want to
watch it in December..
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Sean Heskett
Sent: Thursday, April 16, 2015 7:54 PM
To: af@afmug.com
Subject: [AFMUG] OT can't resist...the new Star Wars trailer is awesome!
Hahah .. yeah… not sure if that’s what we want to use as a reference for
awesome TV shows though ;)
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Kurt Fankhauser
Sent: Thursday, April 16, 2015 10:23 PM
To: af@afmug.com
Subject: Re: [AFMUG] i hate taxes.
Trailer Park Boys was filmed
ME LIKEY!
On 04/17/2015 07:35 AM, Paul Stewart wrote:
Drool … can’t wait! There’s an IMAX theatre near me that I really
want to watch it in December..
*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Sean Heskett
*Sent:* Thursday, April 16, 2015 7:54 PM
*To:* af@afmug.com
*Subject:*
Looking at their site there's a UVC and UVC pro. They look the same but
they have different qualities and based on this thread, voltages.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Apr 16, 2015 10:51 PM, Jeremy jeremysmi...@gmail.com wrote:
We need one product that does gig for Af5x, epmp and ubnt. That would be
glorious.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Apr 17, 2015 3:36 AM, Forrest Christian (List Account)
li...@packetflux.com wrote:
In progress :)
I was
Tycon makes these little dongles that flip the brown/blues which should
work in the meantime. Also, I believe the Netonix switches can do all
three of those at GigE (where oh where is the DC version).
Josh
On Fri, Apr 17, 2015 at 10:37 AM, Josh Luthman j...@imaginenetworksllc.com
wrote:
We
So far, these have powered every device they have been called upon to do if it
is GigE circuit.
Or a circuit with 802.1af type of wiring.
http://www.wbmfg.com/products.cfm?PID=77Cat=
http://www.wbmfg.com/products.cfm?PID=68Cat=
From: Mathew Howard
Sent: Thursday, April 16, 2015 5:42 PM
To:
Tested with SAF?
On Fri, Apr 17, 2015 at 9:41 AM, Chuck McCown ch...@wbmfg.com wrote:
So far, these have powered every device they have been called upon to do if
it is GigE circuit.
Or a circuit with 802.1af type of wiring.
http://www.wbmfg.com/products.cfm?PID=77Cat=
Yay!!!
Snapshot of new features:
·Frame Utilization (PMP450 Only)
What I'm talking about is the thing that breaks femtocells when the SM
is in NAT mode.
bp
part15sbs{at}gmail{dot}com
On 4/17/2015 6:44 AM, Bill Prince wrote:
Not seeing anything about the packet fragmentation that breaks most
femtocells. I know this was in the 13.2 release for PMP4x0, but did
Planning to expand your coverage area? LINKPlanner now provides detailed
planning for PTP links, and access networks with PMP 450 and ePMP. If you have
questions, be sure to post them to the Community or attend one of our Ask the
Experts sessions on Wednesday April 22 at http://bit.ly/1y8nw1T .
Not seeing anything about the packet fragmentation that breaks most
femtocells. I know this was in the 13.2 release for PMP4x0, but did it
ever make it into the PMP100?
bp
part15sbs{at}gmail{dot}com
On 4/17/2015 6:32 AM, Matt Mangriotis wrote:
This software also adds a LOT of new features
Does anyone have a tower maintenance checklist that they would be willing to
share? I am sending a crew out to look at towers and I want to give them a
list of specifics to check for. I have some ideas but would like input from
you guys. Thanks in advance.
We just posted the latest Beta software for both PMP 450 and PMP 100!
If you’ve had any issues with recent releases, we’d strongly encourage you to
try this Beta out. As always, please read the release notes.
Snapshot of new features:
· Frame Utilization (PMP450 Only)
·
Why not make the jumper changeable in a web UI? then you don't have to worry
about a new plastic mold for the case?
—
Sent from Mailbox
On Fri, Apr 17, 2015 at 3:36 AM, Forrest Christian (List Account)
li...@packetflux.com wrote:
In progress :)
I was going to hold off announcing
+1! I use them on every site that we have. I have powered AF, AF5X, Trango
licensed BHs, Gigabit Nanobeams, non-GB UBNT radios, cameras, you name it!
My favorite part about these is when I upgrade a radio from 10/100 to Gb
all I have to do is add a jumper. The boxes we build are modular, and can
Bill,
That fix was pulled into the PMP100 load line for 13.4.
Can you try it on your PMP100s and let us know if it is working satisfactory?
Best,
Cambium Jonathan
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Bill Prince
Sent: Friday, April 17, 2015 9:03 AM
To: af@afmug.com
Subject: Re:
Motorola/Cambium Used
2.4 6dB Stingers 21
2.4 SM's 2400SM 19
2450AP 2 p10 connectorized
2.4 Test Adapter 1
Ubiquiti
Toughswitch TS-5-POE1 New
Bullet M5
messing with this it looks like I can get it to a pretty restricted view. I
just mainly want to not lose remote access to the device or have them doing
something stupid like easily changing the mac, if they mess up anything
else we just will load in a default configuration file. the guys who will
So two products do 2/3 of those products. Augh!
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Apr 17, 2015 at 1:55 PM, Forrest Christian (List Account)
li...@packetflux.com wrote:
The gigabit poe injectors do this, but without sync.
What exactly is Phase 1 for Alignment tone? Alignment Tone, Phase 1 (Phase
2 will require a new FPGA)
On Fri, Apr 17, 2015 at 9:38 AM, Sam Lambie samtaos...@gmail.com wrote:
What about Audio alignment tone? Is that back yet? My installers will hate
me if I implement a new firmware that breaks
I am not sure that everyone in the industry shares that sentiment.
On Fri, Apr 17, 2015 at 9:36 AM, Mike Hammett af...@ics-il.net wrote:
There is no protocol for 24v, AFAIK. It's all 48v which is what all
of our gear should be.
-
Mike Hammett
Intelligent Computing Solutions
24v is passive and really just not a standard at all. It just happens to
be lucky that there's an extra two pair and that Canopy/epmp/Mikrotik/Ubnt
are all 24v.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Apr 17, 2015 at 11:36 AM, Mike
Doh!
Regards,
Chuck
On Fri, Apr 17, 2015 at 11:38 AM, Lewis Bergman lewis.berg...@gmail.com
wrote:
Bummer. I think JAB threw away 20 or 30 when they bought us. I would have
given them to you for the cost of shipping.
On Fri, Apr 17, 2015 at 10:20 AM, Chuck Hogg ch...@shelbybb.com wrote:
I think your issue will be the sledgehammer like permissions in the groups.
They are pretty wide ranging. You can prohibit winbox, but for things like
filter rules and just about anything they would require write privileges.
Write is write without the ability to prevent someone from writing all
It's pretty simple why this isn't in the cards. Today there's a single
switching element per port. To make this switchable there would need to
be eight per port.. One for positive and one for negative for each pair.
Each switching element adds about two dollars to the cost of the product
when
The gigabit poe injectors do this, but without sync. And with some fusing
and wiring issues. This would add the sync and clean up wiring.
On Apr 17, 2015 8:37 AM, Josh Luthman j...@imaginenetworksllc.com wrote:
We need one product that does gig for Af5x, epmp and ubnt. That would be
Not if you use the external GPS pucks for ePMP. You are still out luck for
PMP100, though.
On Fri, Apr 17, 2015 at 2:19 PM, Forrest Christian (List Account)
li...@packetflux.com wrote:
Pretty much. The whole sync thing is the problem.
On Apr 17, 2015 12:13 PM, Josh Luthman
But the gig/sync works on ePMP and not af5x because of the power pinout I
thought?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Apr 17, 2015 at 2:19 PM, Forrest Christian (List Account)
li...@packetflux.com wrote:
Pretty much. The
To help you folks migrating between products this is a good aid. Some UBNT
support is in thanks to Mark Gibbons, Cambium coming soon along and it even
has Powercode BMU detection already. (Procera almost done as well). Development
is at a rapid pace and the team is growing. Not bad for open
There is no protocol for 24v, AFAIK. It's all 48v which is what all of our
gear should be.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
- Original Message -
From: Sam Lambie samtaos...@gmail.com
To: af@afmug.com
Sent: Friday, April 17, 2015
Sam – Alignment tone will work in 13.4. Ignore the phase 1/phase 2 note. Those
are Engineering notes that came out inadvertently :) It makes no difference to
the user.
Thanks,
Sriram
From: Sam Lambie
Reply-To: af@afmug.commailto:af@afmug.com
Date: Friday, April 17, 2015 at 10:40 AM
To:
From the release notes:
So, looks like that is there.
Software Release 13.4 is intended to support PMP 100, PTP 100, PTP 230, PMP
430, PMP 450, PTP 450. Please note that the PMP 400 is NOT supported New
Features:
• Frame Utilization (PMP450 Only)
• Security Banner
• RADIUS CoA Support
•
I believe that is the entire intention of skins.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Apr 17, 2015 at 12:35 PM, That One Guy /sarcasm
thatoneguyst...@gmail.com wrote:
Can I use skins to give customers access in a limited
Anyone know of a service that can take several small business fiber
circuits that don't support bgp and bond them and provide a bgp session ?
Would love to! I have a handful of sites that could use it. I presume I
only need to load it on the SM? Any issues mixing it with 13.1.3 on the AP?
bp
part15sbs{at}gmail{dot}com
On 4/17/2015 8:15 AM, Jonathan Mandziara wrote:
Bill,
That fix was pulled into the PMP100 load line for 13.4.
From: telrad-boun...@wispa.org [mailto:telrad-boun...@wispa.org] On Behalf Of
Faisal Imtiaz
Sent: Friday, April 17, 2015 1:02 PM
First of all, I wanted to express my sincere thanks to the Bridgenet Wireless
Team, for graciously allowing us to see their setup, visit their Landmark
Citrus
Is the frequency NONE now supported on FSK units?
Yes.
Will the SNMP commands be the same for 450 and FSK SMs?
They are same. Please see
https://confluence.camnwk.com/display/CPY/Extrapolated+Link+Test
Also, is there an SNMP command to make an SM do an AP Eval?
It doesn't look like there is
I would recommend that the AP and SMs are on the same version.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Bill Prince
Sent: Friday, April 17, 2015 5:08 PM
To: af@afmug.com
Subject: Re: [AFMUG] Cambium System Release 13.4 Beta - Now Available!
Would love to! I have a handful of sites
I wouldn't care if a cover had to be taken off to adjust jumper positions.
On 4/17/2015 12:55 PM, Forrest Christian (List Account) wrote:
The gigabit poe injectors do this, but without sync. And with some
fusing and wiring issues. This would add the sync and clean up wiring.
On Apr 17,
I would pay extra to avoid it.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Apr 17, 2015 6:37 PM, George Skorup (Cyber Broadcasting)
geo...@cbcast.com wrote:
I wouldn't care if a cover had to be taken off to adjust jumper positions.
On
I may give the VM a try. I wish more monitoring software had something like
CactiEZ...
On Friday, April 17, 2015, WaveDirect li...@wavedirect.org wrote:
To help you folks migrating between products this is a good aid. Some
UBNT support is in thanks to Mark Gibbons, Cambium coming soon along
Have to have some kind of datacenter box etc.. i.e. a MT on both ends then
bonding though tunnels will work, but the bandwidth has to come to a datacenter
or somewhere where there is already bandwidth then to you. Added latency.
Dennis Burgess, CTO, Link Technologies, Inc.
Just wiped my SM to Factory Fresh over wireless. Waited till it registered
via ICC and applied my downloaded config to it. worked like a charm.
Now, can we write a basic config file for the installers to apply to the
SM's to get them started? Or is there something specific in the json code
that
I have a LOT of 5.2 SM's for sale. Make me an offer on them. Low ball
offers will be considered!
Sam
--
--
*Sam Lambie*
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com http://www.newmex.com
I have a new 10 pack of Air Router HP's for sale. Brand new in the box.
$375 will put them on your doorstep.
email offlist : k...@wavelinc.com
Kurt Fankhauser
Wavelinc Communications
P.O. Box 126
Bucyrus, OH 44820
http://www.wavelinc.com
tel. 419-562-6405
fax. 419-617-0110
This is super, I was afraid the FSK line saw its last firmware update
and we have so so many out there. Is the frequency NONE now supported
on FSK units?
Frame Utilization (PMP450 Only)
So we can now graph percent RF airtime utilization on 450 units?
Cool. Would be nice to have same thing with
Can I use skins to give customers access in a limited capacity, create a
user account called customer or whatever and a customer group that has
limited access like no winbox, etc. Let them manage their wireless,
internal subnets, port forwards, whatever? What I saw glancing at the
metarouter thing
On 04/17/2015 02:46 PM, TJ Trout wrote:
Anyone know of a service that can take several small business fiber
circuits that don't support bgp and bond them and provide a bgp session ?
I've not seen anyone do this commercially, but I can make this happen
for you if you like. Let me know if you
I just got in the ARC antennas with the brackets, ARC-BRO70101SO1R2. Just
wondered if they were the same as the ones that were shipping 2 years ago or
are they improved.
Rory
Rory Conaway * Triad Wireless * CEO
4226 S. 37th Street * Phoenix * AZ 85040
602-426-0542
What about Audio alignment tone? Is that back yet? My installers will hate
me if I implement a new firmware that breaks that feature.
On Fri, Apr 17, 2015 at 9:15 AM, Jonathan Mandziara
jonathan.mandzi...@cambiumnetworks.com wrote:
Bill,
That fix was pulled into the PMP100 load line for
Bummer. I think JAB threw away 20 or 30 when they bought us. I would have
given them to you for the cost of shipping.
On Fri, Apr 17, 2015 at 10:20 AM, Chuck Hogg ch...@shelbybb.com wrote:
Contact me off-list...we have a need for 5 of them.
Regards,
Chuck
YES you can. You can create skins and assign them to user accounts.
On April 17, 2015 8:35:19 AM AKDT, That One Guy /sarcasm
thatoneguyst...@gmail.com wrote:
Can I use skins to give customers access in a limited capacity, create
a
user account called customer or whatever and a customer group
Yep
From: George Skorup (Cyber Broadcasting)
Sent: Friday, April 17, 2015 7:18 PM
To: af@afmug.com
Subject: Re: [AFMUG] External POE.
I haven't tried it on any Trango ODUs yet. But I did ask Chuck about it. The
jack shields and the grounding strip is not tied to the negative input. So in
Same protection for the ethernet conductors.
From: Jeremy
Sent: Friday, April 17, 2015 7:33 PM
To: af@afmug.com
Subject: Re: [AFMUG] External POE.
Seems to me like that should work. I don't know if it would afford you any
protection (Chuck?), but it should power them up. For what I spent
Hmm. Not sure. It's not clear to me. The 430 page does say to use the
CNUT pkg3 from the 450 page. When you are on the PMP450 beta page, the
download says for PMP 450 and PTP 450 radios.
So maybe I just didn't get the memo?
bp
part15sbs{at}gmail{dot}com
On 4/17/2015 6:20 PM, George Skorup
Be careful with Trango BHs. The ones I've looked at tie +48 to chassis
ground. I had to isolate them to keep from popping fuses on my -48
ground system.
bp
part15sbs{at}gmail{dot}com
On 4/17/2015 6:06 PM, Jeremy wrote:
Actually, I take that back about the Trango BHs. I forgot I ended up
We are still working through an issue where the pmp430 packages are bricking
pmp400 radios. Pmp400s are not supported, but we did not want to brick them on
you guys, so the PMP430 images were not provided yet. Any pmp430 SM registered
to a pmp450 AP will get upgraded via the pmp450 package.
I found and downloaded the PMP100 and PMP450 versions. However, I can't
seem to locate the PMP430 version.
bp
part15sbs{at}gmail{dot}com
On 4/17/2015 6:32 AM, Matt Mangriotis wrote:
We just posted the latest Beta software for both PMP 450 and PMP 100!
If you’ve had any issues with recent
Actually, I take that back about the Trango BHs. I forgot I ended up
running fiber and direct DC to the Trangos. I have their rackmount -48v
power supply (Duracomm rebranded I think). I was going to put positive on
every pin but there was no way for negative to be isolated in my PRM24
rackmount
For the cost I prefer using midsections as well. So long as you have them
in gravel and not in concrete at the base they work fine. That din rail
cutter looks sweet. Probably cuts much nicer than my tin snips and channel
lock straightening method. I use a chop saw for Din rail when I'm
I know it's not, but there's a range in Phoenix that looks very much
like that.
Josh Reynolds
CIO, SPITwSPOTS
www.spitwspots.com
On 04/17/2015 05:13 PM, Jeremy wrote:
Holy crap! Where is that?
On Fri, Apr 17, 2015 at 4:34 PM, Brett A Mansfield
li...@silverlakeinternet.com
Seems to work well on 450.
On FSK it seems to not give a valid result - getting 0's for capacity on known
good links.
Mark
On Apr 17, 2015, at 5:12 PM, Rajesh Vijayakumar
rajesh.vijayaku...@gmail.com wrote:
Matt,
The correct link for the Extrapolated Link Test is
This is a hill in Cusco, Peru. I wasn't able to get a pic of the other side,
but it has just as many more towers, all mostly cellular and WISP towers.
Thank you,
Brett A Mansfield
On Apr 17, 2015, at 7:13 PM, Jeremy jeremysmi...@gmail.com wrote:
Holy crap! Where is that?
On Fri, Apr 17,
I haven't tried it on any Trango ODUs yet. But I did ask Chuck about it.
The jack shields and the grounding strip is not tied to the negative
input. So in theory, you should be able to put the +48/0V to the + input
and -48 to the - input, then set all of the jumpers to -. Take your
drain wire
I thought it was the same image as the 450 now?
On 4/17/2015 7:18 PM, Bill Prince wrote:
I found and downloaded the PMP100 and PMP450 versions. However, I
can't seem to locate the PMP430 version.
bp
part15sbs{at}gmail{dot}com
On 4/17/2015 6:32 AM, Matt Mangriotis wrote:
We just posted the
Seems to me like that should work. I don't know if it would afford you any
protection (Chuck?), but it should power them up. For what I spent on our
link I decided to just run fiber instead. The buildout cost was minor
compared to the link, and we ran MTP so we can now do up to 6 links with
A few years ago some company proposed an appliance that proclaimed to
manage bgp for multiple circuits. Don't know if the they are still around.
I personally don't think it is a good investment as so much of the bgp
equation depends on the carrier.
On Apr 17, 2015 2:47 PM, TJ Trout t...@voltbb.com
fine blade on hack saw and patience works well. But the din rail cutter
is sweet.
Jaime Solorza
Wireless Systems Architect
915-861-1390
On Fri, Apr 17, 2015 at 7:10 PM, Jeremy jeremysmi...@gmail.com wrote:
For the cost I prefer using midsections as well. So long as you have them
in gravel
So the base sticks down below the concrete at the bottom and sits in the
gravel so it can drain out?
On Thursday, April 16, 2015, Jaime Solorza losguyswirel...@gmail.com
wrote:
Plenty of gravel at base of pit. 4000 psi concrete mix for this area.
Lots of caliche in area. Rebar cage. Not
Details on trango.. Cause its –48 with pos on shield
Gino A. Villarini
President
[cid:1A3C648B-28ED-46F7-BC5B-241EFD39201B]
From: Jeremy jeremysmi...@gmail.commailto:jeremysmi...@gmail.com
Reply-To: af@afmug.commailto:af@afmug.com
af@afmug.commailto:af@afmug.com
Date: Friday, April 17, 2015
Yes, that's how Rohn says to do it. And no, you do not have to use a
concrete base section, a standard mid section is perfectly acceptable to
place in the concrete.
On 4/17/2015 6:56 PM, Caleb Knauer wrote:
So the base sticks down below the concrete at the bottom and sits in
the gravel so it
Holy crap! Where is that?
On Fri, Apr 17, 2015 at 4:34 PM, Brett A Mansfield
li...@silverlakeinternet.com wrote:
I'm not sure I'd like to collocate on this noisy hill. I don't the think
the signal would go very far or have much throughput. Haha.
Thank you,
Brett A Mansfield
Silver
here ya go, pic of it:
http://images.topix.com/gallery/up-T07Q02M6O90JI271.jpg
Josh Reynolds
CIO, SPITwSPOTS
www.spitwspots.com
On 04/17/2015 05:14 PM, Josh Reynolds wrote:
I know it's not, but there's a range in Phoenix that looks very much
like that.
Josh Reynolds
CIO, SPITwSPOTS
phase one done...left Amarillo at 11:45 MST and arrived home at 7502
milesno direct path.tired...but content,,,picked up a 12 pack of
Tecate!Stay thirsty amigos Salud
Jaime Solorza
Wireless Systems Architect
915-861-1390
On Thu, Apr 16, 2015 at 5:21 PM, Jaime Solorza
76 matches
Mail list logo
