Quoting Greg 'groggy' Lehey [EMAIL PROTECTED]:
On Sunday, 8 May 2005 at 9:02:08 -0400, M. Parsons wrote:
Freebsd-5.3 SMP Kernel. Polling enabled.
bash-2.05b$ vmstat -i
interrupt total rate
irq5: ep02937064 1
irq11: ed0
Quoting Chuck Robey [EMAIL PROTECTED]:
Boris Spirialitious wrote:
--- Boris Spirialitious [EMAIL PROTECTED]
wrote:
--- Matthew Seaman [EMAIL PROTECTED]
wrote:
On Tue, Mar 15, 2005 at 08:50:22AM -0800, Boris
Spirialitious wrote:
When opteron support start for Freebsd? I have
4.9.
is supported? Or
Quoting Louis LeBlanc [EMAIL PROTECTED]:
On 11/30/04 01:22 PM, Kenneth Culver sat at the `puter and typed:
Quoting Louis LeBlanc [EMAIL PROTECTED]:
On 11/30/04 11:27 AM, Kenneth Culver sat at the `puter and typed:
Quoting Louis LeBlanc [EMAIL PROTECTED]:
SNIP
I'll post the result tonight
Quoting Louis LeBlanc [EMAIL PROTECTED]:
On 12/01/04 10:44 AM, Kenneth Culver sat at the `puter and typed:
Quoting Louis LeBlanc [EMAIL PROTECTED]:
SNIP I wonder what the people who actually have this working are
doing differently
from those of us who can't seem to get it to work.
I wish I knew
Quoting Raul Zighelboim [EMAIL PROTECTED]:
On Monday 29 November 2004 04:20 pm, Kenneth Culver wrote:
Quoting Kirk Strauser [EMAIL PROTECTED]:
On Monday 29 November 2004 03:21 pm, Kenneth Culver wrote:
One of the computers I'm having this problem with is a P4 with an Intel
chipset
Which
Quoting Raul Zighelboim [EMAIL PROTECTED]:
On Monday 29 November 2004 04:55 pm, Kirk Strauser wrote:
On Monday 29 November 2004 04:35 pm, Raul Zighelboim wrote:
[EMAIL PROTECTED] sysctl -a | grep -i agp
[...]
hw.nvidia.agp.status.status: enabled
What exactly did you do? Did you do anything
Quoting Louis LeBlanc [EMAIL PROTECTED]:
On 11/29/04 05:16 PM, Kenneth Culver sat at the `puter and typed:
Quoting Louis LeBlanc [EMAIL PROTECTED]:
SNIP The xorg.conf card section is:
Section Device
Identifier NV TwinView
VendorName nVidia Corporation
Driver nvidia
# update
Quoting Hauan, David [EMAIL PROTECTED]:
-Original Message-
From: Kirk Strauser [mailto:[EMAIL PROTECTED]
Sent: Monday, November 29, 2004 2:32 PM
To: [EMAIL PROTECTED]
Subject: Anybody have it working? (was Re: NVidia driver not using AGP?)
On Monday 29 November 2004 04:20 pm, Kenneth
Quoting Louis LeBlanc [EMAIL PROTECTED]:
On 11/30/04 11:27 AM, Kenneth Culver sat at the `puter and typed:
Quoting Louis LeBlanc [EMAIL PROTECTED]:
SNIP
Wrong. From nvidia's readme:
Similar to the NVIDIA Linux Driver Set, the user can decide if the NVIDIA
driver should use its internal AGP GART
Quoting Hauan, David [EMAIL PROTECTED]:
-Original Message-
From: Kirk Strauser [mailto:[EMAIL PROTECTED]
On Monday 29 November 2004 04:20 pm, Kenneth Culver wrote:
How about this, then:
Has *anyone* successfully used an NVidia card with the most
recent x11/nvidia-driver port
Quoting Kirk Strauser [EMAIL PROTECTED]:
On my 5.3 system (recompiled completely, including ports, one week ago), the
NVidia driver (for a GeForce MX 400) from ports doesn't seem to be using AGP:
$ sysctl hw.nvidia.agp.status.status
hw.nvidia.agp.status.status: disabled
I've built a new
Quoting Chris Howells [EMAIL PROTECTED]:
On Monday 29 November 2004 21:21, Kenneth Culver wrote:
(I forget which) with a GeForce4 MX 440. The other is an athlon 64
3200+ with a
via k8t800 chipset and a geforce FX 5900 (running in 32 bit x86 FreeBSD).
The NVidia drivers don't yet support the K8T800
Quoting Louis LeBlanc [EMAIL PROTECTED]:
On 11/29/04 03:13 PM, Kirk Strauser sat at the `puter and typed:
On my 5.3 system (recompiled completely, including ports, one week
ago), the NVidia driver (for a GeForce MX 400) from ports doesn't
seem to be using AGP:
$ sysctl
Quoting Kirk Strauser [EMAIL PROTECTED]:
On Monday 29 November 2004 03:21 pm, Kenneth Culver wrote:
One of the computers I'm having this problem with is a P4 with an Intel
chipset
Which reminds me: I forgot to mention that my system has a 1.4GHz
Thunderbird
on an Asus A7V (KT133) motherboard
Quoting Peter Risdon [EMAIL PROTECTED]:
Robert Huff wrote:
Louis LeBlanc writes:
Your config looks like I have to go shopping for another graphics
card.
Not sure if I can even get the same one now.
Though they're not state-of-the-market, Matrox (with I have
always had
Quoting fandino [EMAIL PROTECTED]:
Chris Howells wrote:
On Friday 15 October 2004 09:57, fandino wrote:
I'm out of ideas, It doesn't matter if I use other PC or hard disks,
performance
sucks compared to Linux :-(
OK, so you came to conclusion that performance sucks based on the
the theoretical
Quoting fandino [EMAIL PROTECTED]:
Kenneth Culver wrote:
well, my usage pattern is write a big file and few seconds later
read it. So my tests
were valid for the use of the computer.
But you have reason, I must provide a more formal report. I redid all test
with bonnie++ and results shows Linux
Quoting fandino [EMAIL PROTECTED]:
Hello list,
This is an interesting issue. While I was installing FreeBSD 5.3BETA7
I wonder about the performance that the new branch will bring to my
computer, and it was a deception how bad FreeBSD performs compared
with Linux on the same hardware (even I
Quoting [EMAIL PROTECTED]:
Hello,
I´ve installed FreeBSD 5.2.1 in my PC machine. I compiled my own
programs and started to running them. For my surprise, I checked that
FreeBSD programs spent almost 50% more time than the same program compiled
to linux. I checked several compile options, but it
Quoting Josh Hansen [EMAIL PROTECTED]:
Bill Moran wrote:
[EMAIL PROTECTED] wrote:
Hello,
I´ve installed FreeBSD 5.2.1 in my PC machine. I compiled my own
programs and started to running them. For my surprise, I checked that
FreeBSD programs spent almost 50% more time than the same program
Quoting Uwe Laverenz [EMAIL PROTECTED]:
Hi,
I have a strange problem with the NVidia drivers on my machines: when I start
a glx-application (glxgears, quake2...) the performance is normal. If I
make another attempt a few minutes later, the performance is ridiculous slow.
Example:
glxgears, 1st
Quoting Ahmad Zulkarnain [EMAIL PROTECTED]:
Hi guys!
I'm a newbie runnin FreeBSD 5.2.1 on Clevo M22ES laptop. Sorry if my
question has been asked before. I have a built-in SmartLink modem (SiS
chipset) and I grabbed myself the official linux driver from their
website. Can I just compile the driver
Quoting Henrik W Lund [EMAIL PROTECTED]:
Kenneth Culver wrote:
snip
What you want to do can't be done. The best you can do really is port the
driver. The kernel internals/driver apis are totally different between linux
and FreeBSD.
Ken
Greetings!
Speaking of driver APIs, do you know of any good
Quoting David O'Brien [EMAIL PROTECTED]:
On Wed, Jun 30, 2004 at 01:17:35AM -0400, Kenneth Culver wrote:
Quoting Doug White [EMAIL PROTECTED]:
Me either. -current actually supports running i386 binaries in amd64 mode.
Thats one of the processor's features. :-)
You can't run amd64 binaries when
Quoting Remi [EMAIL PROTECTED]:
Well I just got an email back from the manufacturer of the AMD64 laptop I
wanted to buy. Im not sure how it works when switching 64 to i386, but they
say it's not supported in the BIOS(I assume this is where it is suppose to
be changed) So now I come to a cross
Quoting Doug White [EMAIL PROTECTED]:
On Tue, 29 Jun 2004, Kenneth Culver wrote:
It runs OK, with some minor nits compared to x86 version. I'm not sure
what the
laptop maker is talking about... but if you boot the x86 version of FreeBSD,
it'll work. I think they meant you can't switch from amd64
Quoting Remi [EMAIL PROTECTED]:
Just to clarify exactly what you mean. I can the x86 version of BSD with no
changes to the BIOS, jumpers or anything on an AMD64?
Sorry in advanced if this is a stupid question, Ive never dealt with
anything but x86
Yeah, no changes anywhere. I have my machine set
Quoting Michal Pasternak [EMAIL PROTECTED]:
David O'Brien [Sat, Jun 26, 2004 at 04:00:26PM -0700]:
You do know you can run FreeBSD/i386 on the Athlon64 3200+ laptop,
right? :-) A 3200+ running 32-bit FreeBSD will out-perform the P4
2.8GHz running the same OS.
... but will it outperform it also
Quoting Michael Clark [EMAIL PROTECTED]:
I have 2 fxp Intel 100mb cards in this machine that work fine. I have ran
it with 3 fxp
cards in the past. I added an em0, Intel gigabit this morning. The card
displays a
non active status during the boot process. RC.conf is processed and the
card
does
for auto-negotiation to finish.
Ken
Michael Clark
Nemschoff Chairs Inc
mclark at nemschoff dot com
CompTIA A+, Network+, Server+, MCP
Voice: (920) 457 7726 x294
Fax: (920) 453 6594
-Original Message-
From: Kenneth Culver [mailto:[EMAIL PROTECTED]
Sent: Monday, June 28, 2004 3:39 PM
You can't use linux drivers in BSD, but you might be able to port linux driver
to FreeBSD.
Ken
Hi,
I've installed an internal Smartlink HSP56
Micromodem pci modem on the first pci slot of my
H30CF jetway motherboard with(if i'm not mistakem)
only one com1 port and a com2 header which i think
Quoting stan [EMAIL PROTECTED]:
Is there a way, in FreeBSD 4 STABLE, to determine what a given machine's
intrupt (PCI intrupt assignment) ussage is?
--
They that would give up essential liberty for temporary safety deserve
neither liberty nor safety.
Quoting Osmany Guirola Cruz [EMAIL PROTECTED]:
I feel very happy when I saw in the nvidia site the drivers for linux
and of course for FREEBSD, and I need to Know what about ATI and
FREEBSD(linux not have problems) drivers because I will acquire a new
machine and I need to decide between a ATI
Quoting Lucas Holt [EMAIL PROTECTED]:
If you are going to run freebsd 5.2.1 there aren't a lot of hoops to
get an ATI card to work, but some people have reported better frame
rates and less graphical glitches with nVidia cards.
I have an ATI Radeon 9000 64mb AGP in my PC and its working fine. I
Quoting Jason [EMAIL PROTECTED]:
Osmany Guirola Cruz wrote:
I feel very happy when I saw in the nvidia site the drivers for linux
and of course for FREEBSD, and I need to Know what about ATI and
FREEBSD(linux not have problems) drivers because I will acquire a new
machine and I need to decide
Quoting Osmany Guirola Cruz [EMAIL PROTECTED]:
Hi people
I have a little problem whith the flash plugin on my BSD box. I
installed the flash plugin port whithout problem but these not work ,
it showme a black screen in the place of the plugin and no picture
no animation no nothing :-(. i try
Quoting Osmany Guirola Cruz [EMAIL PROTECTED]:
Sorry .. but i installed both the linuxflash plugin port and the
bsd(flashplugin-mozilla-0.4.10_5 ) port and i tested the bsd port
whit mozilla and epiphany ..and due to this instalation does not work
i have to install the linux ports(flash and
Quoting Spades [EMAIL PROTECTED]:
Hi,
I have a AMD XP 2000 system, can i install FreeBSD 4.7-REL?
Of course, you can install any pc operating system on this machine. although 4.7
is old and I'd reccommend 4.9 since it's the latest 4.x
Ken
___
[EMAIL
Quoting Bob Collins [EMAIL PROTECTED]:
On Fri, Feb 13, 2004, Chuck Swiger clacked the keyboard to produce:
Peter Leftwich wrote:
Can someone recommend software that lets you mount TO freebsd (ufs)
partition FROM WITHIN Windows XP Pro SP1 (transparently)?
I am not familiar with any such software,
Quoting Goodleaf, John M [EMAIL PROTECTED]:
Hello,
I cvsup'd the ports this AM and have tried to build firefox. Actually, it
builds fine, it's the install that fails. I've tried on two machines, one
running 4.9-STABLE and the other running 5.2-RELEASE. In both cases the the
install fails with
Quoting Chad Leigh -- Shire.Net LLC [EMAIL PROTECTED]:
On Feb 10, 2004, at 5:25 AM, Chuck Swiger wrote:
Marc Wiz wrote:
On Mon, Feb 09, 2004 at 01:53:38PM -0500, Charles Swiger wrote:
OK. The price difference for AMD vs. Intel is pretty significant,
but be aware that you'll also pay a
Quoting Chad Leigh -- Shire.Net LLC [EMAIL PROTECTED]:
On Feb 10, 2004, at 11:24 AM, Kenneth Culver wrote:
Quoting Chad Leigh -- Shire.Net LLC [EMAIL PROTECTED]:
On Feb 10, 2004, at 5:25 AM, Chuck Swiger wrote:
Marc Wiz wrote:
On Mon, Feb 09, 2004 at 01:53:38PM -0500, Charles Swiger wrote:
OK
Quoting Charles Swiger [EMAIL PROTECTED]:
On Feb 9, 2004, at 11:16 AM, Marc G. Fournier wrote:
G'day all ...
Simple question, I would hope ... I want to spec out a new server, and
want to compare AMD vs Intel ... is there anything online that gives
approx equivalents? ie. a Xeon 2.4Ghz
Quoting Loren M. Lang [EMAIL PROTECTED]:
On Mon, Feb 09, 2004 at 02:09:15PM -0500, Craig Reyenga wrote:
I've heard that Sony and Dell don't support UNIX permissions on their
proprietary hard drives. Stick with WinXP for now until a patch is committed
into the source tree.
I'm a little confused on
Quoting Stas [EMAIL PROTECTED]:
Hello,
Does FreeBSD supports ALSA drivers?
No it doesn't.
Ken
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Quoting Jonathan Walters [EMAIL PROTECTED]:
I connect to the internet with a wireless card (Blitzz 802.11b 11Mbps
Wireless LAN PCI Card, http://www.iblitzz.com). This has always worked well
under Windows 2000, but now I'd like to do the same with FreeBSD 4.9.
Unfortunately, the closest
Quoting Khalil Khozeimeh [EMAIL PROTECTED]:
I have configured a FreeBSD 4.8 system as a filtering bridge/firewall using
the IPFW. I am interested in enabling FTP clients from inside the firewall
to access FTP servers on the outside. It will be appreciated if somebody can
point me in the
Quoting Matthew Faircliff [EMAIL PROTECTED]:
Hello,
Can anyone tell me if openoffice 1.1 (openoffice-devel) works with the native
java (diablo-jdk13)?
Matthew Faircliff
___
[EMAIL PROTECTED] mailing list
Quoting Daniel Hawton [EMAIL PROTECTED]:
SoloCDM wrote:
Why do the ISOs seem to be three CDs of 600Mb each for RedHat compared
to 1.5 CDs for FreeBSD? I thought the files were larger with FreeBSD
and its tarballs.
Does FreeBSD offer all the packages from A to Z in their CDs?
There
Quoting Daniel Hawton [EMAIL PROTECTED]:
4.4BSD Lite 2 is BSD.. which is from SysV.. heh That's what I said.
But that's my point, it's NOT from SysV. It's always been it's own thing,
parellel to SysV. It had some ATT code in it at some point, but is not from
SysV.
Ken
Kenneth Culver wrote
Quoting Denis [EMAIL PROTECTED]:
Hi All!!!
I think that WinXP more popular and more easy than FreeBSD. People
all over the world know what is Windows but don't know what is
FreeBSD. More programs is written work on Windows
Windows more comfortable in work with graph...
If
I have used postfix and sendmail on both linux and FreeBSD and I definitely
prefer postfix. For starters, its security track-record is much better. Also it
was very easy to ste up a system that uses mysql with virtual domains, SASL for
relay authentication (also interfacing with mysql) etc... I
On Wed, 3 Sep 2003, Colin Watson wrote:
My rc.conf file appears to be broken in some way, and this is preventing
my system from booting. It boots to a heavily resticted system, with
only the / file system mounted and the statically linked binaries
available. Problem is, I can't edit my
I am trying to set up a FreeBSD 5.1 i386 box. Everything seems to be
fine, except, incoming ftp is all rejected. Inetd.conf is set to allow
ftp. Is there another switch to set somewhere to allow all incoming
ftp? If so, what/where?
is inetd even starting? I don't think that inetd starts
Hi,
I need your help, I bougth FreeBSD4.8 (Build Operating System: FreeBSD
4.8 i386 [ELF] ) from FreeBSD Mall, but I have problems I can't
configure my xwindow I'm attachement the log file.
My video card is: Nvidia TNT2 64m
My monitor is: LG studioworks 500G 15''
well , i am a final year student in my computer engineering
course.
All i have to ask is IS THERE IS AN IMPLEMENTATION OF CIFS , Common
Internet File System
AVAILABLE ON FREEBSD?
i'll be waiting for your
As far as I know, what you want is also
Hi,
yes, samba is available for freebsd. but i mean whether a CIFS client
is available or not?
plz reply
smbclient comes with samba, and you can use smbfs.
Ken
___
[EMAIL
I think that you've just been unlucky in buying two hard drives or
whatever which have failed prematurely. I think if there was such a
bug in FreeBSD, a lot more people than you would be complaining and
heaven and earth would be being moved in order to fix it.
I would have to agree that it's
Are you sure you're running the linux emulator kernel module?
Ken
On Wed, 20 Aug 2003, Yusuf UZUNAY wrote:
i tried it too! But no result! :(
--- Kenneth Culver [EMAIL PROTECTED] wrote:
If it's a linux program you want to brandelf using
Linux instead of
FreeBSD as the name.
Ken
man brandelf
On Tue, 19 Aug 2003, Yusuf UZUNAY wrote:
Hi!
when i was trying to run a linux program in FreeBSD i
take an error like ELF file ABI version invalid! Ýs
there anyone who has got some idea about this error?
Thanks!
-yusuf
__
Do you Yahoo!?
I personally would go with FreeBSD as a router. I have been used both a
200Mhz P1 and a 300Mhz P2 as routers with out problems. I personally
have really liked being able to ssh into it su to root and change what
ever I want to. It makes for a really flexible system.
BTW I would suggest
As a Note, the top end routers out there, Junipers, run JunOS, which is
a FreeBSD variant. A Juniper M160 can route OC192's at wire speed
(That's 10Gb/s folks).
However, the way those are set up, FreeBSD doesn't do the actual routing,
as far as I can remember they upload a routing table to the
Coming from a Network Engineering perspective, I'm interested in having
my servers be as redundant as possible. I have two NIC's in the
machine, so I would like for the server to be reachable over either
interface.
To my mind, I would give a loopback interface an IP address that is the
(FreeBSD 4.8 and FreeBSD 3.3)
Oh, I've never tried it on 4.x. It works on my -CURRENT boxes though:
/0 /1 /2 /3 /4 /5 /6 /7 /8 /9 /10
Load Average
Interface Traffic PeakTotal
lo0 in
why would ya want to route lo1 127.0.0.1 to a 192.x.x. address ???
seems to me that there are to many system side processes that listen or
ocmmunicate thru that...giving access or routing that traffic to a
internal address ...doesnt seem to smart to me.
--
I wouldn't; I was using that as an
why would ya want to route lo1 127.0.0.1 to a 192.x.x. address ???
seems to me that there are to many system side processes that listen or
ocmmunicate thru that...giving access or routing that traffic to a
internal address ...doesnt seem to smart to me.
This is basically what I just said.
Is there any standard (or non) FreeBSD tool that is used to measure a
current network throughput/bandwidth? And also, what are the
requirements to do so, and do I need to be root to run, or do I need to
load a special kernel module?
Just run systat -if 1
That will tell you what you want to
You can use the sound module, or recompile your kernel with device pcm,
but I doubt very seriously that the nforce2 audio is supported.
Ken
uhub1: 3 ports with 3 removable, self powered
pci0: serial bus, USB at device 2.2 (no driver attached)
pci0: network, ethernet at device 4.0 (no driver
On Mon, 28 Jul 2003, Jason Hunt wrote:
On Mon, Jul 28, 2003 at 06:14:29PM -0400, [EMAIL PROTECTED] wrote:
I was wondering how to modify the appropriate files to setup a FreeBSD
computer to act as a NAT Router, that would do the following:
Check the natd(8) man page, it should give you
Yes, my ISP's DHCP server should assign me a hostname. I assumed that's
how it was done by dhclient on RedHat7.3/8/9 all of which just did this
automatically whenever I selected DHCP configuration of the interface.
I've been comparing FreeBSD 5.1's default dhclient-script to RedHat's
trying
Why is the Logo of FreeBSD an devil
What have an oparating System to do with the devil
Of course, there is something like daemon's (under Windows called services)
but this is not the meaning of deamon!!!
I think the meaning of daemon is
d=disk
a=and
e=? (i don't know)
I have spent a lot of time on FreeBSD.org web pages, but I still can not
find
VERY SIMPLE answer for this question:
what version of FreeBSD should I use ?
I need system which is VERY STABLE, with as few possibilities to hack as
possible
(the best is absolutely closed :-) ), running only
Thanks for quick response.
I have thought so, but I want to be sure. There is also 4.7. Do you think
better to use 4.8 ?
It's best to use the latest 4.x
Ken
___
[EMAIL PROTECTED] mailing list
Sendmail works fine in FreeBSD 4.8. Named is considered insecure
because people use it. If you pick another product to be safe, make
sure no one uses it. Any suggestion on this list would be to popular
to be safe. As I said in my last email, people find holes in popular
software more
Well, but what about djbdns ?
Is it fully compatible with BIND ?
I think it is, as you use it :-)
I have never heard about it.
It's complient with whatever standards there are governing DNS. And it
works very well for me.
Ken
___
[EMAIL PROTECTED]
Well, but what about djbdns ?
Decent program, but the license is awful.
yeah, the licence is wierd.
Is it fully compatible with BIND ?
No, it is not. The configuration is not even remotely close, and the author
refuses to support parts of the RFC that he feels to be problematic.
It
Well, but what about djbdns ?
Is it fully compatible with BIND ?
I think it is, as you use it :-)
I have never heard about it.
no, try powerdns instead :)
Depends on what he means by compatible. I took this to mean will it
communicate with bind servers and the answer is yes it can be
The standard dhclient-script sets the hostname. At least, it sure
*looks* like it does... [line 97 of
src/contrib/isc-dhcp/client/scripts/freebsd,v 1.9.2.6]
OK, yeah, it does, so there must be some other configuration that needs to
be done.
Ken
___
I am an extreme newbie at FreeBSD. I have it installed but when I go
into the Xserver in either of the two GUIs I get a weird mouse that
seems to only be able to stay on the very top of the screen and has
no vertical movement.
I have it setup on Auto and PS/2 Busmouse settings.
Reboot! :)
Hey, she's not talking about Windows ;-)
Sounds like her video card is hung, and in that case, the only thing to do
is reboot, as much as it sucks.
Ken
___
[EMAIL PROTECTED] mailing list
net.inet.tcp.blackhole=2
net.inet.udp.blackhole=1
kern.ps_showallprocs=0
You can make these lines take effect without reboot in the following
manner (as root):
sysctl -w net.inet.tcp.blackhole=2
sysctl -w net.inet.udp.blackhole=1
sysctl -w kern.ps_showallprocs=0
rebooting would also make
I can't reboot. This is a server.
Why are you even running X on a server? I know this doesn't help your
problem, but it's generally not a good idea to run X on servers.
Ken
___
[EMAIL PROTECTED] mailing list
Yes, I know, but this server is also my workstation (it's just a home
server).
ok, well like the other people said... did you try kill -9 as root on the
process in question? If you did, and it still won't die, most likely
you'll have to reboot.
Ken
The fact that it is a moderated forum leads me to believe that the
slashdot operators are themselves FreeBSD bigots. I for one have much
less respect for Slashdot for allowing that drivel through.
They don't usually let it through per say, you have to browse the comments
at a very low Score
I wrote a small utility that can tell you.
http://www.glue.umd.edu/~culverk/ifbwmon-0.1.tar.gz
just untar it, cd to the directory that gets created, type make, then run
the resulting executable like this:
ifbwmon fxp0
replace 'fxp0' with whatever ethernet interface you use.
Ken
On Tue, 8
vchans probably aren't working right with your sound card yet. I had a
problem for a while with my soundcard, but it seems to be working fine now
with vchans.
Ken
On Tue, 8 Jul 2003, Ion-Mihai Tetcu wrote:
Hi,
Any now an then, mostly now :(, when I simoultaniosly use more that one
sound
At that point, only 1 application at a time will be able to access the
soundcard at 1 time.
Ken
On Tue, 8 Jul 2003, Ion-Mihai Tetcu wrote:
On Tuesday 08 July 2003 17:09, Kenneth Culver wrote:
vchans probably aren't working right with your sound card yet. I had
a problem for a while with my
I'm under KDE ;), so it starts up.
buh# ps ax | grep artsd
706 ?? S 0:28.09 /usr/local/bin/artsd -F 10 -S 4096 -s 60 -m
artsmessage -l 3 -f
and i suppose it's the suspect.
I've tried
artsdsp -v aviplay %f Marlene\ Dietrich_Peter.mp3
and got (no hang):
-
artsdsp:
On Thursday, July 3, 2003, at 07:58 PM, Laszlo Vagner wrote:
I just updated to 5.1-r and was wondering how to add soundcard support
to the
kernel.?
in 4.8 i just added 'device pcm' in my kernel config and recompiled
but 5.1 is different
and i dont want to do something to mess things up.
Probably a really stupid question - but is there a compatability port of
some sort for 4.x systems so we can run things compiled for 5.x ? :-)
No, but you can go the other way around. You MIGHT be able to use the 5.x
libc directly on 4.x, but I wouldn't recommend it.
Ken
Not sure if this will actually help you but I recall thinking my sound
wasn't working after a recent KDE install. Turned out that it was simply
installing the desktop without explicit sound assignments for system
events (so it merely seemed like sound wasn't working, yet no pop up
errors when
No you can't - it relies on the 5.1 kernel.
OK, well I wasn't sure how much things had changed as far as the ABI goes,
so I didn't want to rule it out.
Ken
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
I've read that there are multiple kernels for BSD. What does FreeBSD
use? Can I swap it out for other kernels? Or am I mistaken?
FreeBSD uses the FreeBSD kernel. You can recompile it using the source for
the FreeBSD kernel, but it is the only kernel that works with FreeBSD.
Ken
I have been looking for NAT program which is not part of some other
program like NATD is part of IPFW or IPNAT is part of IPFILTER or NAT of
user ppp. I can not find any NAT program in the FBSD ports collection
unless I mis-understood some description. If anybody knows of one
please let me
years ago I used a VAX VMS system that automatically saved file versions
whenever a file name was clobbered.
I've seen wrapper scripts for vi to accomplish the same but it would be
nice if someone had actually implemented something at the file system
level to do this. Anyone know of
Does your monitor support higher resolutions? If you have an old monitor,
did you put proper values in the monitor section of your XF86Config?
Ken
On Tue, 17 Jun 2003, Rik Scarborough wrote:
I cannot get the resolution for X above 800x600 (although I'm not sure,
it could be one smaller than
On Tue, 17 Jun 2003, Rik Scarborough wrote:
On Tue, 17 Jun 2003, Kenneth Culver wrote:
Does your monitor support higher resolutions? If you have an old monitor,
did you put proper values in the monitor section of your XF86Config?
It's a new flat screen monitor. I've pretty much ignored
On Tue, 17 Jun 2003, [iso-8859-1] haifa touati wrote:
Hi all, I tried to ssh to a remote machine from a FreeBSD 4.5 machine,
but I received ... connection refused message. However I succeeded to
connect to this machine from Windows. Are there any specifics settings
to fix this? Thanks in
cscope works well for C, don't know about the other ones.
Ken
On Wed, 11 Jun 2003, Michal Pasternak wrote:
Hello,
I am looking for some sort of software which would allow me
to generate C/C++ (and preferably other languages, like Python
or PHP) references for a given project. Suppose I am
On Saturday, May 31, 2003, at 03:42 PM, Tim Kellers wrote:
How about AIM?
/usr/ports/net/aim
It requires Linux emulation, but I think gaim does, too.
Tim Kellers
CPE/NJIT
AIM does require linux emulation, but gaim doesn't.
Ken
On Saturday 31 May 2003 03:17 pm, Steven Lake wrote:
Just
1 - 100 of 130 matches
Mail list logo
