Re: [LIH] SOS: Linux Mandrake distributors in chennai

i mailed Rahul apologising for that. but i feel we need not be so rigid, that's why i sent a thanks message. if i wanted to say only "thanks", i'd have sent it to Ashwin personally. but you see, it had a comment extra! i too understand what Rahul meant. i'm a list moderator myself, and i send

Re: [LIH] mandrake 7.2 doth not boot

these are some of the messages i get when lnx4win tries to load: PIIx4: not 100% native mode: will probe irqs later Unable to handle kernel paging request at virtual address c400 the system hangs after this line: Code: f2 ae f7 d1 49 89 cb snip the worst thing is, yesterday i installed

Re: [LIH] how to install fonts of .ttf type

hi there, I wonder did I post this but search kfontinst on freshmeat. Installing ttfs is as easy as windows if you are using KDE. All you need is root password... :-)) u need a seperate font server to handle .ttf fonts. try xfstt. vishy __

[LIH] Network Boot ROM

Hi, I am having a DLink Ethernet card in the nodes.Now if I wanted to remote boot a Red Hat Linux in my diskless nodes ,what Boot ROM should I use in my Dlink Ethernet cards? what will be the cost of a boot ROM? Kindly advice me, With regards, Prashanth

[LIH] X-windows poblem

hello everybody I have redhat 7.0 installed on my m/c which is made up of i815 board. So far when it was configured with "Generic vga" it was working fine (i mean the X-windows) , then i tried to configure it using Xconfigurator It detects Intel 815 chipset with samsung17 monitor then after

Re: [LIH] How the Linux Kernel Boots

On Sun, Jan 21, 2001 at 03:00:00PM +0530, Diwakar - tamil.com wrote: no problem in the link. i could access the page from my own mail posted to the list. may be your mail client didnt display it correctly? Hello Diwakar, I had already posted to the lsit apologising for my error. During copy

Re: [LIH] how to install fonts of .ttf type

Hi xfs that ships with RHL6.2(At least I know of) can handle ttfs. In fact it does it well. So xfstt is not required(Or are they one and the same thing? I wonder). XF86 4 was suppose to offer built in ttf support. KFontinst I suggested is a gui frontend to install the font. Bye Shridhar

[LIH] procmail receipe

Hi, I want to send a copy of LIH mails to 3 of my collegues. Say the mail has to be sent to a@localhost, b@localhost c@localhost. I tried the following : :0: * ^To:.*linux-india-help { :0: ! a@localhost :0: ! b@localhost :0: ! c@localhost }

Re: [LIH] how to install fonts of .ttf type

On Mon, 22 Jan 2001 01:14:07 -0800 (PST) "Vishwanath T.K." [EMAIL PROTECTED] wrote: u need a seperate font server to handle .ttf fonts. try xfstt. You do not need a separate ttf font server for X 4.X http://xfree.org/4.0.1/fonts.html Rgds -- Find

[LIH] Modem Configuration on Linux

Dear Friends, I have been trying to configure a GVC 56 Kbps external modem on Red Hat 7.0. It uses the rockwell chipset. I wanted to connect to VSNL using the number 17 which is assigned in Mysore. I configured the modem using kppp from the Gnome window manager under KDE menus. I used

[OT] Just a thought [was Re: [LIH] [Commercial] Php - Mysql programmers needed]

HI all Shall we create a new type of posting i.e job offerings? Just a thought... Bye Shridhar Parthesh Gulawani wrote: Our Organisation PRODUCTORIUM DOTCOM INDIA PRIVATE LIMITED has a C2C - C2B portal www.planetcustomer.com -- An alpha

Re: [LIH] Modem Configuration on Linux

Surjo Das wrote: authentication, but immediately it gets disconnected and throws up an error message "peer is not authorised to use address dynamically_assigned_ip_address of vsnl". put noauth in /etc/ppp/options .. -- Anand Biligiri S ([EMAIL PROTECTED]) Member Technical Staff Net Brahma

Re: [LIH] procmail receipe

On Mon, 22 Jan 2001, Rajesh Fowkar wrote: Hi, I want to send a copy of LIH mails to 3 of my collegues. Say the mail has to be sent to a@localhost, b@localhost c@localhost. I tried the following : :0: * ^To:.*linux-india-help { :0: ! a@localhost :0:

[LIH] Re: Remote Booting Linux Client

check out the site, http://www.ibiblio.org/mdw/HOWTO/Diskless-HOWTO-7.html http://www.slug.org.au/etherboot http://www.han.de/~gero/netboot.html regards, prashanth __ Do You Yahoo!? Yahoo! Auctions - Buy the things you want at great prices.

[LIH] Re: Remote Booting Linux Client

Hi, I am having a DLink Ethernet card in the nodes.Now if I wanted to remote boot a Red Hat Linux in my diskless nodes ,what Boot ROM should I use in my Dlink Ethernet cards? what will be the cost of a boot ROM? Kindly advice me, With regards,Prashanth

Re: [LIH] Modem Configuration on Linux

Try using wvdial. IMHO it is the best dialer. - Soumya --- URL: http://www.geocities.com/soumyanath - Original Message - From: Surjo Das [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, January 22, 2001 4:03 PM Subject: [LIH] Modem

[LIH] X-sever / Frame Buffer

Dear Angels can some tell me what is the difference between X-server and Frame Buffer as far as performance is concerned or any disadvantages of frame buffer over X-server initially i had installed X with XFree86_SVGA on media GX and i had lot of problems with screen refreshes and host of

Re: [LIH] Modem Configuration on Linux

Use wvdial touch /etc/wvdial.conf. wvdialconf /etc/wvdial.conf open wvdial conf put your telephone no username and password. put the dns address of your vsnl server in /etc/resolve.conf. wvdial check for ifconfig ppp0 happy netting cheers -- Regards ph:5099025

[LIH] linux compatible network card and modem

Hi, I am looking for RH 6.2 compatible modem and network card, which are cost effective and commonly available in India. Bye Rana No Name e-mail: [EMAIL PROTECTED] -- LIH is all for free speech. But it was created for a purpose. Violations

Re: [OT] Just a thought [was Re: [LIH] [Commercial] Php - Mysql programmers

Hi all, Yes I think so. There should be an opening for MCA and B.Tech. graduates who are studying in not so well known institutes and where there is no campus placement, so that they can work in high end and exciting technology. Bye Rana

Re: [LIH] new hardware support

Shridhar Daithankar wrote: Hi Mario Get Duron box against celeron.. It's a different story if you are buying PIII. But celeron is not worth of it's price. I swapped my celeron 400 for AMD 500 and got a machine tha's at least twice as fast... 100MHz FSB+DDR on duron make it rock...

Re: [LIH] Modem Configuration on Linux

hai ! try command $ wvdialconf /etc/wvdial.conf for more info see man wvdialconf regards shubh REC-Surat -- @ i love/( )\ linux ^ ^ -- Have I overlooked something perhaps ? Can anybody help me in

Re: [LIH] linux compatible network card and modem

Hi Pick up GVC/D-link external modem and intel EnthernetExpress card... Bye Shridhar No Name wrote: Hi, I am looking for RH 6.2 compatible modem and network card, which are cost effective and commonly available in India. Bye -- Find out

RE: [LIH] Network Boot ROM

hi prashanth what model of dlink card are u having if u are using 550tx get this bootrom number dfe554 it has inbuilt support for rhl if u are using 538tx the boot room no is dfe-538r it has no support but u can burn the rom with eprom writer. regarding the price check with local dealer arvind

Re: [LIH] linux compatible network card and modem

No Name wrote: Hi, I am looking for RH 6.2 compatible modem and network card, which are cost effective and commonly available in India. Bye Rana DLink 56k and 33.6k EXTERNAL modems work happily with linux. Usually any EXTERNAL modem will work. I do not know much about network cards, but

Re: [LIH] new hardware support

Hi Mario I haven't checked the prices recently, however duron+mobo+128MB RAM should be around 12K.(That's a good estimate.. OK:)) Linux should run out of box on it. It should support additional graphics card. Almost all mobos with on board display, support it IIRC. Secondly 95 should run on

Re: [LIH] SOS: Linux Mandrake distributors in chennai

got the idea!! archan [EMAIL PROTECTED] Diwakar - tamil.com wrote: i mailed Rahul apologising for that. but i feel we need not be so rigid, that's why i sent a thanks message. if i wanted to say only "thanks", i'd have sent it to Ashwin personally. but you see, it had a comment extra! i too

[LIH] Programming Links

Hi all This is one more useful link... http://stommel.tamu.edu/~baum/programming.html Bye Shridhar -- The mailing list archives are available at http://lists.linux-india.org/cgi-bin/wilma/LIH

RE: [LIH] new hardware support

mario you au are installing RHL get 7.0 an install it it will have no problem arvind On 19-Jan-01 Mario Da costa wrote: Hello friends, I am thinking of upgrading my 486 system to an Intel Celeron 600 Mhz. The mother board maybe an intel 810 E. I think the 810 (not 810 E) cannot support an

[LIH] Basic interpreter for Linux!

Hi lists! Is there a basic interpreter for Linux. Kindly post a message if you happen to know about one. Regards to all, madhurjya __ 123India.com - India's Premier Portal Get your Free Email Account at http://www.123india.com

Re: [LIH] apache server

You have to give sufficient rights to the user directories that apache can read them and show you the pages. Typically this is /home/user so wheck permissions on the user's public_html directory which you have specified. you should give the "x" i.e. directory access to the directory and r to

Re: [LIH] ZZplayer

Hi Anand, I had old versions of SDL and smpeg libraries and on that ZZplayer was playing fine. Then I thought of upgrading both SDL and smpeg packages different problems started cropping up. One of them was what you have mentioned. Install old versions of SDL and smpeg packages. On my system I

Re: [LIH] procmail receipe

Sreeji K Das saw fit to inform me that: On Mon, 22 Jan 2001, Rajesh Fowkar wrote: Hi, I want to send a copy of LIH mails to 3 of my collegues. Say the mail has to be sent to a@localhost, b@localhost c@localhost. I tried the following : :0: * ^To:.*linux-india-help { :0:

[LIH] help in startx

hi i have redhat 7 whenever i reboot my system i need to run Xconfiguratorto get X-windows. i tried xf86config but in vain.i am getting error saying cant connect:errno=111 failed to set default font path'unix/:7100' fatal server error could not open default font 'fixed' kindly help sriram

Re: [LIH] apache server

Hello Chien, Have u made entries for ur user accounts in httpd.conf file with proper permissions. Hi, friends: I install an apache server in my linux box; and I got some problems to let it wrong properly. The problems are: 1. The web server is able to run properly. For example, I set the

[LIH] Weird network problems between 2.2.14 and 2.4.0

Hi! I recently downloaded and compiled a new kernel v2.4.0 while at the same time keeping the older v2.2.14-12 handy. I have compiled into the new kernel a lot of firewalling options, half of which I thought seemed nice to have(netfilter etc. etc.). The new kernel seemed to work well in almost

Re: [LIH] SOS: Linux Mandrake distributors in chennai

no apologies please :-) === With all sanity you can't reach your destination === - Original Message - From: "Diwakar - tamil.com" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Monday, January 22, 2001 1:56 PM Subject: Re: [LIH] SOS:

Re: [LIH] da gimp and CMYK. um, and SUSE Linux

no request for receipts please. you'r not spying on me or r u ? ;-) === With all sanity you can't reach your destination === - Original Message - From: "Aniruddha Shankar" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday,

Re: [LIH] apache server

Hi, vishy: Thanks for your reply. Can you show me how can I make a proper permission on my account, for example, cwu6? Chien-Lung On Mon, 22 Jan 2001, Vishwanath T.K. wrote: Hello Chien, Have u made entries for ur user accounts in httpd.conf file with proper permissions. Hi,

Re: [LIH] /multiple startx / Xwindows and Diskless Nodes

space does matter i realized this, but then how do you switch b/w the X servers. expectedly the system allows you to be in the most recently opened server. is it like this or i need some more "spaces" ? :-) Regards Rahul === With all sanity you can't reach your

[LIH] xcdroaster work !!!

Just configured my hpcdwriter under linux today and the xcdroast works great. -shyam _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com -- An alpha version of a web

[LIH] Help installing mysql

After I installed the MySQL server from a directory on my hardisk, by typing rpm -ivh MySQL-3.22.19a-1.i386.rpm I am asked set a password for MySQL root user. However when I run the command: mysqladmin -u root password my password I get the following error, mysqladmin: connect to server at

Re: [LIH] linux compatible network card and modem

GVC / DLink for modems and Realtek rtl8139 for nic Regards, Sunil Dhaka -- Find out more about this and other Linux India mailing lists at http://lists.linux-india.org/

Re: [LIH] Help installing mysql

#mysql -u root -p when prompted for the password ...enter the pw though connecting to mysql as root is not recommended at all. Create a super user by GRANT ALL ON *.* TO user@localhost IDENTIFIED BY "userpassword" WITH GRANT OPTION This is a much safer way You can also specify which host the

Re: [LIH] Re: amd howto

RaghuNath L proclaimed: I am useing RH7 , problem here is there is amd.net (which contains all entries what you gave by defualt)in /etc and one more amd.conf but no amd.master in /etc Then create an /etc/amd.master file containing the line: -a /amd -r /net /etc/amd.net And /etc/amd.net

Re: [LIH] comparison of two data strings on a web page

[EMAIL PROTECTED] proclaimed: I may need to generate a dynamic graph, after checking out some details. The data will be available as string, and the values will change depending on various aspects. is it possible to invoke gnuplot without display to run in background and generate a

Re: [LIH] da gimp and CMYK. um, and SUSE Linux

Aniruddha Shankar proclaimed: Is it possible somehow to get the CMYK values for images that were created in GIMP? I have to mail a brochure to an ad agency and they want the values for some prepress work. Do I really have to switch to Photoshop? #include "I'm not a Graphics Whiz Warning!"

Re: [LIH] apache server

Chien-Lung Wu proclaimed: Thanks for your reply. Can you show me how can I make a proper permission on my account, for example, cwu6? 1. Does your srm.conf have the following line: UserDir public_html 2. Did you create a directory called /home/username/public_html 3. Did you give read

[LIH] How to disable onboard sound card ?

Hi All, I have a ESS solo1 sound card, thats what sndconfig detects. There is noway to know exactly what soundcard it is , and it is on the board. I have inserted a new creative card into the system now. How do I disable the onboard sound card so that the new card will start working? and yeah

[LIH] fetchmail logs on but does not fetch

Hello friends, I have been trying to configure fetchmail to download mail from my POP account. I am able to log on and see how many messages there are. Then when fetchmail actually tries to download the mail it seems to freeze then reports a timeout error. I have searched the mail archives and

Re: [LIH] Basic interpreter for Linux!

On Mon, Jan 22, 2001 at 06:35:50AM -0800, [EMAIL PROTECTED] wrote: Hi lists! Is there a basic interpreter for Linux. Kindly post a message if you happen to know about one. Regards to all, search for yabasic at freshmeat --

[LIH] C program Linux

Hi, On our old SCO server there was a C program for some string comparison etc. We compiled the same program under Linux. Though it compiles without any problems, it just gives one warning that gets function is dangerous. But our problem is after running the binary with the required parameters

[LIH] tar mt

Hi, Is anybody using tar along with mt to append to the existing data on a tape. If yes, what is the procedure to accomplish the same. Here we want to append to existing tapes. If tar mt appending is not possible than we will have to use the Tape utility. Thanks in advance. Regards --

Re: [LIH] apache server

Hello Chien, Have u made entries for ur user accounts in httpd.conf file with proper permissions. oye! Entries for user accounts in httpd.conf?? The only change that I know about for user's personal homepages is the Userdir entry. What entries do you do for user accounts?? --

Re: [LIH] fetchmail logs on but does not fetch

Mario Da costa rearranged electrons thusly: I have been trying to configure fetchmail to download mail from my POP account. I am able to log on and see how many messages there are. Then when fetchmail actually tries to download the mail it seems to freeze fetchmail: POP3 RETR 1 fetchmail:

[LIH] Zip drive

Hi, I got a new zip drive and want to configure it under linux can anybody tell me how to go about doing this. Its a iomega 100mb drive. Thanx. Regards, --Pradeep. ~~ Pradeep.Sangunni -- [EMAIL PROTECTED] SuSE Linux 7.0 -- kernel

[LIH] 2 hdd's

I have to two hardisks fixed to my pc one for windows and the other for linux is it possible for me to access the windows hard drive from linux How do i get to do this? Thanx Regards, --Pradeep. ~~ Pradeep.Sangunni -- [EMAIL PROTECTED]

[LIH] Library problems

First of all looks like kiran was away for sometime has returned! Coming to my problem, 1) When ever i try to compile any s/w using make or try to run the script file ./configure or ./install I get the errors, searching for QT...no (no QT header and libraries)please check ! a) when i searched

Re: [LIH] Modem Configuration on Linux

Is it a winmodem? Rockwell oh ! then I don't think so it will work Please try on the link here if you can find details about your modems www.linmodems.org At 04:03 PM 1/22/2001 +0530, you wrote: Dear Friends, I have been trying to configure a GVC 56 Kbps external modem on Red Hat 7.0. It

Re: [LIH] 2 hdd's

The mount command will do the job. For further info. on mount command do man mount. -Rupesh ~~~ Life's Like A Roller Coaster, Just Ride On. ~~~ On Mon, 22 Jan 2001, Pradeep Sangunni wrote: ==I have to

Re: [LIH] 2 hdd's

Pradeep Sangunni rearranged electrons thusly: is it possible for me to access the windows hard drive from linux How do i get to do this? suppose linux is on /dev/hda and doze on /dev/hdb just do mount /dev/hdb /mnt/hdtemp (assuming /mnt/hdtemp exists) -- Suresh Ramasubramanian -- mallet

Re: [LIH] 2 hdd's

Pradeep Sangunni wrote: I have to two hardisks fixed to my pc one for windows and the other for linux is it possible for me to access the windows hard drive from linux How do i get to do this? you have to mount the windows partition under Linux. if /dev/hda1 is your C drive then mount -t

Re: [LIH] apache server

Hi, Here is the extract regarding the httpd.conf form the Apache Manual..This may explain about the httpd.conf file. --- During the installation, Apache will configure the files in the conf directory for your chosen installation directory.

Re: [LIH] fetchmail logs on but does not fetch

Hi Mario, You can use fetchmailconf from X to configure fetchmail.. anurag - Original Message - From: "Mario Da costa" [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, January 23, 2001 9:19 AM Subject: [LIH] fetchmail logs on but does not fetch Hello friends, I have been

Re: [LIH] SOS: Linux Mandrake distributors in chennai

Rahul Jindal wrote: no apologies please :-) or when u apologise, or sugest u apologise, or any of the other combinations, *please strip off the part of the mail your are NOT replying to*. thanx. stripped off 900+ characters aprox -- Find out more

Re: [LIH] 2 hdd's

On Mon, 22 Jan 2001 23:09:20 -0600 (CST) Pradeep Sangunni [EMAIL PROTECTED] wrote: is it possible for me to access the windows hard drive from linux How do i get to do this? Thanx Well, mount the other drive edit your /etc/fstab tohave something like /dev/hda1 /mnt/win_c vfat

Re: [LIH] C program Linux

Rajesh Fowkar forced the electrons to say: On our old SCO server there was a C program for some string comparison etc. We compiled the same program under Linux. Though it compiles without any problems, it just gives one warning that gets function is dangerous. How nice of gcc. gets() is one

Re: [LIH] apache server

Hi, vishy: Thanks for your reply. Can you show me how can I make a proper permission on my account, for example, cwu6? hi ! follow following steps 1.create a dir in y'r account named public_html say cwu6/public_html/ 2.give x -permisson to all (group and others )

Re: [LIH] fetchmail logs on but does not fetch

Mario Da costa forced the electrons to say: when fetchmail actually tries to download the mail it seems to freeze then reports a timeout error. I have searched the mail archives and even fetchmail: POP3 +OK 2773 octets reading message 1 of 23 (2773 octets) fetchmail: timeout after 134661752

Re: [LIH] procmail receipe

On Mon, Jan 22, 2001 at 07:08:29PM +0530, Rajesh Fowkar wrote: Sreeji K Das saw fit to inform me that: Change them as: :0 * ^To:.*linux-india-help { :0 c ! a@localhost :0 c ! b@localhost :0 ! c@localhost } After doing the above, a, b and c get 25 copies of the same mail.

RE: [LIH] 2 hdd's

hi pradeep yes it is possible to access the other drive from linux. What u need is know is where this drive is connected ie hda-primary master hdb-primary slave hdc- secondary master hdd- secondary slave you will also need to know the partition numbers ie hda1, hda2..etc after you have

Re: [LIH] apache server

VaibhaV Sharma forced the electrons to say: The only change that I know about for user's personal homepages is the Userdir entry. You forgot LoadModule userdir_module path to mod_userdir.so AddModule mod_userdir.c Binand -- Find out more about

Re: [LIH] fetchmail logs on but does not fetch

always with the same mail? that one mail could be corrupt / it might be a spam with an unresolvable domain in the from field That is not the case, I have been having this problem for some time now. Even for other POP servers. I still think that it is a problem related to storing the mail

Re: [LIH] Library problems

On Tue, Jan 23, 2001 at 10:33:37AM +0530, shyam wrote: First of all looks like kiran was away for sometime has returned! Coming to my problem, 1) When ever i try to compile any s/w using make or try to run the script file ./configure or ./install I get the errors, searching for QT...no (no

Re: [LIH] How to disable onboard sound card ?

On Mon, 22 Jan 2001, Satish K. Pagare wrote: I have a ESS solo1 sound card, thats what sndconfig detects. There is noway to know exactly what soundcard it is , and it is on the board. I have inserted a new creative card into the system now. How do I disable the onboard sound card so that

RE: [LIH] Zip drive

hi pradeep read jaz-drive how to found at linuxdocs.org arvind On 23-Jan-01 Pradeep Sangunni wrote: Hi, I got a new zip drive and want to configure it under linux can anybody tell me how to go about doing this. Its a iomega 100mb drive. Thanx. Regards, --Pradeep.

Re: [LIH] fetchmail logs on but does not fetch

Binand Raj S. rearranged electrons thusly: Mario Da costa forced the electrons to say: fetchmail: POP3 +OK 2773 octets reading message 1 of 23 (2773 octets) fetchmail: timeout after 134661752 seconds waiting for listener to respond. I hope that you didn't wait that many seconds

Re: [LIH] C program Linux

On Tue, Jan 23, 2001 at 11:43:39AM +0530, Binand Raj S. wrote: But our problem is after running the binary with the required parameters it is not giving us the desired output. That shouldn't be a gets() problem. How did you run the program and what was the desired o/p? The actual o/p? See

Re: [LIH] fetchmail logs on but does not fetch

Mario Da costa rearranged electrons thusly: That is not the case, I have been having this problem for some time now. Even for other POP servers. I still think that it is a problem related to storing the mail on my local machine. check the permissions of /var/spool/mail, /etc, /etc/mail.

Re: [LIH] fetchmail logs on but does not fetch

Suresh Ramasubramanian forced the electrons to say: I hope that you didn't wait that many seconds before posting to the list! (It turns out to be 4 years and 3 months) Heh - I was hoping someone'd do the math :) In mutt, bang and echo stuff | bc - simple, isn't it? :-) Binand - I doubt

Re: [LIH] 2 hdd's

Hi Pradeep, It is very well possible to access the windows files on the other drive. Just type fdisk and find out the mount point. It would be something like /dev/hda0 or /dev/hda1. create a directory /mnt/hdd open the file /etc/fstab. add an entry into it as follows: /dev/hda1(as in fdisk)

[LIH] what id DNS?

Hi all, I am useing my linux server as a DNS server but I am not yet fully clear as to how it works, does it also do cacheing ?. Please guide me to some good DOC. Thanks in advance ajay = Warm Regards Ajay Chaudhari Mumbai pager:-9602-101616