to have
a sharper image than the Nvidia based cards.
_
Brian Guralnick
- Original Message -
From: Bagotronix Tech Support [EMAIL PROTECTED]
To: Multiple recipients of list proteledausers
[EMAIL PROTECTED]
Sent: Tuesday, February 06, 2001 12:46 PM
Subject: [PROTEL EDA USERS
. I know this will give you some
un-wanted copper, but it will protect the screw head land area around the
hole. It will also prevent you from routing any traces just below the screw
head area which may be penetrated due to the force and action of tightening
the screw.
_
Brian Guralnick
word by another 16 bit word...
If the limitation of Win2K was 1280x1024, this would be truly sad since
I've seen a monitor designs for 4096x2048 for desktop 2:1 aspec 70mm film
rated display.
_
Brian Guralnick
Occasionally, your grid setting may make it difficult to grab the
corners. Try zooming in and setting the grid to 1. Remember to first focus
the fill, they click let go on a corner, then you should be able to
resize...
_
Brian Guralnick
I remember members mentioning in the past that it was possible to print
to a .PDF. How do you do this? Where can I get such a printer driver?
Thanks,
_
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This message sent by: PROTEL EDA USERS
In the past, to help grab edit SCHEMATIC arcs, I would temporarily set
the system grid to 1 disable the electrical grid.
_
Brian Guralnick
- Original Message -
From: Abd ul-Rahman Lomax [EMAIL PROTECTED]
To: Multiple recipients of list proteledausers
[EMAIL PROTECTED
Hi,
I was cleaning up my system. The drawer Design Explorer 99
SE\System\Temp\ contained about 190 megabytes of data. Is it safe to
delete?
_
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This message sent by: PROTEL EDA USERS MAILING LIST
?
_
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To join or leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave
virtual ram paging file? Sometimes, as an
option, Win2K presets this to 150% of you system memory by default. I keep
mine at 1024MB.
4. Which video card sound card do you use?
5. Any anti virus software running in the background?
_
Brian Guralnick
printer on the port as a potential key. Outside of Protel, I've seen a
compiler with a hardware key go nuts when my printer was off on the parallel
port in Win2K.
_
Brian Guralnick
- Original Message -
From: [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Friday
of
above 20 gig HDs today. Also, I have 5 other application which require the
one gig or more, I think that the 1 gig barrier will soon be typical if it
is not already with large software packages.
_
Brian Guralnick
- Original Message -
From: Roger [EMAIL PROTECTED]
To: Protel EDA
It's not just Protel, it's also the way it sifts data through the ODBC...
_
Brian Guralnick
- Original Message -
From: Gordon Price [EMAIL PROTECTED]
To: 'Protel EDA Forum' [EMAIL PROTECTED]
Sent: Monday, March 19, 2001 2:40 PM
Subject: Re: [PEDA] Windows 2000 Professional
Little note about NT4:
You can clean up protel's memory consumption in the same way as win2K.
In the task manager / processes, click on the client99.exe, then click end
process. This should release the used memory.
_
Brian Guralnick
- Original Message -
From: Robison
Warning
Could not process message with given Content-Type:
multipart/mixed;boundary==_NextPart_000_0043_01C0BC4F.97B47C00
if I
described the illustration in words.
The size of this message alone is 6kb, the typical size of messages within
this group.
_
Brian Guralnick
- Original Message -
From: Andrew J Jenkins [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Wednesday, April 04
' with any suffix after that.
_
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To join or leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email
Where was my head...
---
Instead of using Nets global, is it possible to define specific nets
as
being global within Protel?
---
I forgot, just use Ports are global when making a netlist stick any nets
you want to a port...
_
Brian Guralnick
- Original Message
that all 3 possibilities have applications.
_
Brian Guralnick
- Original Message -
From: Ian Wilson [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Monday, April 09, 2001 1:15 AM
Subject: Re: [PEDA] Bus nets
On 09:04 PM 8/04/2001 -0700, Abd ul-Rahman Lomax said
CTRL-D defines an end of communications in postscript. Kind of like a soft
reset.
_
Brian Guralnick
- Original Message -
From: Peder K. Hellegaard [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Thursday, April 26, 2001 3:20 AM
Subject: [PEDA] SV: HP Laser
. No matter
how many times I re-install, I'll never get Protel's real icon on that
system's uninstall. Same for the SP6 uninstall. Has anyone else seen this?
_
Brian Guralnick
- Original Message -
From: Ken Henrich [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent
on the system.
_
Brian Guralnick
- Original Message -
From: Gary Richardson [EMAIL PROTECTED]
To: 'Protel EDA Forum' [EMAIL PROTECTED]
Sent: Wednesday, May 02, 2001 3:10 PM
Subject: [PEDA] two monitors
I just received a system with a Matrox G450 video card and would like
If you are talking about killing the Client99SE.exe task from the task
manager, it's been like that for years. Same in NT4.
_
Brian Guralnick
- Original Message -
From: Bruce Marler [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, May 03, 2001 4:19 PM
Subject
site.
Just copy this link to your Internet explorer address bar download the files that
you want.
ftp://ftp.point-lab.com/quartus/Public/ProtelUsers/
Supercompact.zip - 3.1kb - Super compact schematic symbols for almost all discrete
components.
_
Brian Guralnick
- Original
Thanks all, now I can really p-off the FCC. hehe :)
_
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
the other unchanged parts on your schematic page.
_
Brian Guralnick
- Original Message -
From: Jon Elson [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Wednesday, July 11, 2001 1:12 PM
Subject: Re: [PEDA] Off topic / Need formula to calculate F in Mhz Wave length
Can you please post your listed IRQs at boot up within NT.
_
Brian Guralnick
- Original Message -
From: [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Wednesday, July 18, 2001 6:46 PM
Subject: Re: [PEDA] Pregnant pauses!
| This was addressed a couple
Do you have an Esoniq on-board sound chip? Go to creative lab's web site and download
the updated driver if you do.
_
Brian Guralnick
- Original Message -
From: [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Wednesday, July 18, 2001 6:46 PM
Subject: Re
layer, even though both boards came from the same
manufacture.
_
Brian Guralnick
- Original Message -
From: Dennis Saputelli [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Thursday, July 19, 2001 6:49 PM
Subject: Re: [PEDA] Bow Twist
| I've occasionally
of part
2) user who entered part, date of entry
3) component part number / type / included /
4) footprint part number / type / included / metric / imperial / pin1
center /
Though, to properly set this up, I have no clue there...
Brian Guralnick
who entered part, date of entry
3) component part number / type / included /
4) footprint part number / type / included / metric / imperial / pin1
center /
Though, to properly set this up, I have no clue there...
Brian Guralnick
just made a tuned antenna which can multiply the
signal strength of the 3rd harmonic coming from the
crystal's decoupling current through those caps, 80Mhz.
Brian Guralnick
- Original Message -
From: Greg Olson [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent
pass metric into Protel, or do I have to calculate the entries to
imperial?
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
, plus user input as to the
additional meat for the land area build the component.
Brian Guralnick
- Original Message -
From: [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Thursday, July 26, 2001 7:10 PM
Subject: Re: [PEDA] ClientBasic footprint generator
More values are easier cheaper in 0805. For example, check out 20 MOhm, very
difficult to find in 0603 if you do find it, the price is ridiculous. For 1M and
less, I use 0603, for anything above 1M, I still use 0805.
Brian Guralnick
- Original Message -
From: Brad
can make a gigantic difference.
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
* - or email -
* mailto
| W2K takes a long time to reboot because its automaticly correcting files,
| healing itself, and wondering why Protel99SE crashed!
That's funny, my Win2K takes half the time to boot compared to my Win98, about 45
seconds.
Brian Guralnick
.
Space Bar will rotate one way, shift space witll rotate the other.
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
NOTE: Win2K will take an additional 15-20 seconds to boot if a SBLive is installed,
AND an additional 20-25 seconds if Roxxio's Direct CD is installed. There are much
better solutions to these 2 products which make them system boot faster run
smoother faster in general.
Brian
:
QFPfootprintGeneratorScript.bas - Protel ClientBasic script.
QFPfootprintGeneratorScript.txt - added documentation.
Goodluck.
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http
/
|
| QFPfootprintGeneratorScript.bas - Protel ClientBasic script.
| QFPfootprintGeneratorScript.txt - added documentation.
Brian Guralnick
the plain 22 to
220. Can anyone suggest a fix?
Brian Guralnick
- Original Message -
From: Peter Smith [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Wednesday, August 22, 2001 5:11 AM
Subject: Re: [PEDA] ClientBasic footprint generator.
| Here
I remember once awhile back, an automated sheet entry generator server was once
mentioned in this news group. Perhaps somebody remembers what it was called.
Brian Guralnick
- Original Message -
From: Ian Wilson [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED
I figured automating the generation of ports might leave on to just re-generating
the sheet entry ports, all of them, once he made a change to a port on the sheet. I
may have been mistaken as to the abilities of Aspiring Technology's server.
Brian Guralnick
- Original
Me too.
Brian Guralnick
- Original Message -
From: [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Monday, August 27, 2001 4:13 AM
Subject: Re: [PEDA] Spam trawlers in this group
| Hi,
|
| I also got spam mails from EDA Tools Cafe News since last week
tone conversions: pictogerberexample.zip
This has some sample BW hires conversion : HRLOGOgerberexample.zip
Brian Guralnick
- Original Message -
From: Kerry Murphy [EMAIL PROTECTED
head in same resolution for
both screen mode, the display may be blurred on your second monitor. All the
original mode which were available in the 5.52 drivers work the same.
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto
You could try making, or editing a library component which has your custom socket
decal. This component will be treated as 1 component. In the schematic, just change
the IC's footprint to this new component decal.
Brian Guralnick
- Original Message -
From: [EMAIL
SCRAP what I said earlier, need my morning coffee... :)
Brian Guralnick
- Original Message -
From: Brian Guralnick [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Tuesday, September 04, 2001 12:26 PM
Subject: Re: [PEDA] Creating/implementing IC socket PCB
- 0.22
0.75 - 0.60
Goodluck.
Brian Guralnick
- Original Message -
From: [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Wednesday, September 05, 2001 4:21 PM
Subject: [PEDA] Altera 144Pin TQFP Landing Pattern
| Hi,
|
| I need a landing pattern for Altera p/n
SOT23 packages to cover all the variations across diode, transistor, fet.
Is that so bad.
Additional, I have seen a single transistor in the past, way back when sot23 was
first introduced, where the manufactuer actually reversed the 12 pin numbers on
their sot23 packages.
Brian
getting this right, Protel ClientBasic does not support Years above 1999? And
the documentation was written in 1999. Did Protel expect this function to only work
for that particular year? Did Protel's ClientBasic exist back in 1980? Was Protel
thinking forward, or backward?
;)
Brian
You could try making a footprint with my footprint generator in imperial mode. The
problem here is that Altera only specifies Metric obviously, the pin-pin spacing
still doesn't fall on every mil.
Brian Guralnick
- Original Message -
From: [EMAIL PROTECTED]
To: Protel
Playing with the electrical grid so that it's 125% of the regular grid works great
for me. I always seem to catch the center of the pins this way even when I have an
Imperial grid board with these metric TQFPs.
Brian Guralnick
- Original Message -
From: Jon Elson [EMAIL
Could be related to the grid electrical grid setting.
Brian Guralnick
- Original Message -
From: Ian Wilson [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Thursday, September 20, 2001 5:58 PM
Subject: Re: [PEDA] PCB : drawing track after track
| On 06
. The system is also needed for when
others use the computer besides the Administrator. Remember, the OS still needs to
access the page file while others with lower privileges are logged on. It was the
same with NT4.
Brian Guralnick
- Original Message -
From: Jenkins
It's called the SBLive drivers.
Brian Guralnick
- Original Message -
From: Colin Weber [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Tuesday, September 25, 2001 6:19 PM
Subject: Re: [PEDA] Windows 2000
| All the time. It is intermittent!
|
|
| At 03
update from creative.com.
If you do not believe me about the SBdead problems with Win2K, join the creative news
group find out for yourself.
news.creativelabs.com
Brian Guralnick
- Original Message -
From: Wayne Trow [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED
manufacture's data sheets.
PicToGBR.zip - a QBasic program which will convert a picture to Gerber with halftone
/ shade support.
Brian Guralnick
- Original Message -
From: Francisco Simoes [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Saturday, October 20, 2001 1:04
I may be interesting to redo my 2 inductor generators so that you put in the wanted
inductance they will generate the appropriate sized inductor.
Brian Guralnick
- Original Message -
From: ElectronTrade (info) [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent
.
Is it the export, or import which is messing up?
Is there a more secure, error free format for export to a cad format for the
plastic mold guys?
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave
Great news,
Importing the .DXF generated from Protel into Camtastic generates a fatal
exception error.
Brian Guralnick
- Original Message -
From: Ian Wilson [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Monday, October 22, 2001 7:13 AM
Subject: Re
:
SuperCompact.zip - Create full schematics which look good with legible text even
on 8.5 x 11 printouts using sheet size B or C. B C = same space as D E sheets
with these symbols.
Brian Guralnick
- Original Message -
From: Wayne Trow [EMAIL PROTECTED]
To: [EMAIL PROTECTED
| I wouldn't expect much for my AUD$4000 outside of the pain of having wasted
| so much money.
Yes, like ATS should do some boards for me at that price.
Brian Guralnick
- Original Message -
From: Don Ingram [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent
| | I wouldn't expect much for my AUD$4000 outside of the pain of having wasted
| | so much money.
|
| Yes, like ATS should do some boards for me at that price.
|
Or maybe send an engineer over for free personnel training. Wait a minute, it's not
free, it's 4G$ a year.
Brian
I wonder if Altium might surprise us with a re-vamp of the Protel package
double it's capability for the new price? Or, am I just being too hopeful?
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED
Almost, or partially lost. After placing the component, just hit enter, place, then
enter. Don't worry, the designator will still automatically increase it's number.
Brian Guralnick
- Original Message -
From: Mike Reagan [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL
the components in the schematic
aligned in such a way that I was able to visualize how they will lay out in the PCB
package in advance. In doing so, I have made complex PCBs without a single via with
regard to data signals, without having to make changes on the PCB side back
annotate.
Brian
have 2 cpu's, I need WinXP
Professional which costs too much compared to Win2K Professional.
Brian Guralnick
- Original Message -
From: Mark Richards [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED];
[EMAIL PROTECTED]
Sent: Tuesday, November 20, 2001 4:32 PM
Subject
- Protel ClientBasic script.
QFPfootprintGeneratorScript.txt - added documentation.
Goodluck.
Brian Guralnick
- Original Message -
From: Sean James [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Wednesday, November 21, 2001 4:06 PM
Subject: [PEDA
I have for the Right Angle Mini-Din5 - used for audio s-video.
Brian Guralnick
- Original Message -
From: Tim Fifield [EMAIL PROTECTED]
To: Protel EDA Form [EMAIL PROTECTED]
Sent: Monday, November 26, 2001 11:44 AM
Subject: [PEDA] connector footprint
| Does anybody have
-S- shaped inductor
generator.
SuperCompact.zip - super compact generic schematic symbols library.
Brian Guralnick
- Original Message -
From: Ian Wilson [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Tuesday, November 27, 2001 7:43 PM
Subject: Re: [PEDA
can
get support for free almost indefinitely without having to renew some sort of
membership.
Is Altium saying, that after a year, if I don't renew the subscription, I get
stuck with an issue with Protel, they will not answer my calls?
Brian Guralnick
for the differential signal while grounding
the outer 2 , or course, ground the shield. I've successfully transferred a 4GHz
signal with such a setup.
When I say high density flex, I'm talking 0.5mm pin-pin. The really thin traces on
the flex help keep capacitance radio emitions down.
Brian
I agree. My only concern may be how you attach the twisted pair from PCB to PCB.
Will there be a consistency issue from each unit manufactured to the next?
Brian Guralnick
- Original Message -
From: Richard Sumner [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED
It's probably the new screen saver email virus circulating through their server.
I've seen other site go up down through the past few days.
Brian Guralnick
- Original Message -
From: Darren Moore [EMAIL PROTECTED]
To: 'Protel EDA Forum' [EMAIL PROTECTED]
Sent: Sunday
yearly license fee, it covers all newer
releases of Quartus Max+Plus combined without any additional costs.
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http
Just checking. Some of my messages didn't seem to get through today.
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
gap rule is small enough so that a polygon can
actually be built.
Brian Guralnick
- Original Message -
From: Patrick Adair [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Wednesday, December 12, 2001 4:02 PM
Subject: Re: [PEDA] URGENT!!!
| Insure that polygons
Test #2,
Is this message getting through?
My last 3 posts are missing.
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
Oddly enough, the first time I called for Protel support back with P98, the first
thing they told me to do was join this list. Q, Does Protel send my support dollars
to maintain this group then?
Brian Guralnick
- Original Message -
From: Abd ul-Rahman Lomax [EMAIL
. If
Point Lab Research were to sell this 250 mip CPU core, I'm sure we would make the
compiler free.
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com
compared to your desktop computer settings.
Brian Guralnick
- Original Message -
From: Marshall Edge [EMAIL PROTECTED]
To: Protel EDA Forum (E-mail) [EMAIL PROTECTED]
Sent: Friday, December 14, 2001 11:18 AM
Subject: [PEDA] Setting Colours
| I have 99SE installed on desktop
in Protel.
I figure, before you re-install, that these might be useful to test first.
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers
the letters are pail and thin with some ghosting.
I'm either going back to Matrox G4xx, or getting a single display GeForce3 with
an old Matrox Millennium in a PCI slot.
Has anyone else successfully run an AGP video card with an old PCI video card in
Win2K?
Brian Guralnick
I only use BNC cables. Both monitors are Mitsubishi 4040u. Replacing the video card
with my Matrox G400 creates a perfect image, exactly matched, on both screens. No
blur at all.
Brian Guralnick
- Original Message -
From: [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL
.
Holly Cow, what a display!
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL
Additional:
The ATI initially was ever so slightly blurrier than the Hercules. After removing 3
caps jumping 6 ferrites on the RGB analog output, the video ATI virtually matched
the Hercules.
Brian Guralnick
- Original Message -
From: Brian Guralnick [EMAIL PROTECTED
It's the video card. The only way to get 2 good images with the V7100/2V1D is to
have 1 digital LCD screen connected 1 analog screen connected on the main analog
output.
Brian Guralnick
- Original Message -
From: Bagotronix Tech Support [EMAIL PROTECTED]
To: Protel EDA
LOL
Brian Guralnick
- Original Message -
From: Bagotronix Tech Support [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Monday, December 17, 2001 6:06 PM
Subject: Re: [PEDA] Good Dual head video card combination for Protel.
| FCC Part 15 be blowed
=
ftp://ftp.point-lab.com/quartus/Public/ProtelUsers/rightscreen2.png 112k
Sorry about my server speed, it only 256Kbits per second on UL.
Brian Guralnick
- Original Message -
From: Chris Mogford [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Monday
David Bowie was some .mp3 music playing.
What's a virus vector?
Brian Guralnick
- Original Message -
From: Ian Wilson [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Monday, December 17, 2001 10:26 PM
Subject: Re: [PEDA] Good Dual head video card
. On the other hand, the
GeForce3 T5 makes the Matrox look like something from the early 90's.
Brian Guralnick
- Original Message -
From: Darryl Newberry [EMAIL PROTECTED]
To: 'Protel EDA Forum' [EMAIL PROTECTED]
Sent: Tuesday, December 18, 2001 10:02 PM
Subject: Re: [PEDA
update (recommended), but if you use some of the Liveware
stuff, you would probably want the full Liveware package.
Brian Guralnick
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http
With Altera, the ByteBlasterMV on the parallel port used to cause a fatal system
error about 10% of the time. Everything else is game multimedia related...
Brian Guralnick
- Original Message -
From: Tony Karavidas [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED
My original recommendation, The GF3-TI5 with the ATI Expert will give you gaming
galore. If you want an idea of what I mean, mail me off this list at
[EMAIL PROTECTED] .
Brian Guralnick
- Original Message -
From: Stephen Casey [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL
1 - 100 of 349 matches
Mail list logo