On 9/3/2013 8:39 AM, Carsten John wrote:
Hello everybody,
I've installed a SunRay server on top of Openindiana 151a8. Nothing
spectacular, worked out without major problems.
I set up a kiosk session that presents a chooser (based on a setup from Craig
Benders Think Thin Blog) with a list of
On Wed, Aug 3, 2011 at 11:54 AM, JuergenL sunray-user...@lennefer.de wrote:
The session works ok, but no sound. The file mentioned is there and has
the correct rights and owner:
# ls -l /tmp/SUNWut/dev/utaudio/utdsp-0
crw--- 1 vera lennefer 14, 3 Aug 3 20:51
On Mon, May 30, 2011 at 7:55 AM, Fuerle, Thomas thomas.fue...@oenb.at wrote:
So my question is, will
Oracle VDI be supported on Oracle Enterprise Linux in the future like the
Sun Ray standalone server
Oracle has a strict policy about not disclosing details of future
product direction. It's
On Fri, May 27, 2011 at 6:28 AM, Clift, Tom CIV NSWCDD, K55
robert.cl...@navy.mil wrote:
All, we got some new Sun Ray 3's today and tried replacing some of our Sun
Ray 2's. The Sun Ray 3 boots but is hung with a 21 error and it appears
the Sun Ray 3 is having a problem with DHCP because it
On Wed, May 25, 2011 at 10:32 PM, Aaron Browne gopo...@gmail.com wrote:
Our IT department has sourced a Microsoft Wireless Keyboard 800 and
Microsoft Wireless Mouse 1000.
They connect to the SunRay via a USB dongle. The keyboard works fine but the
mouse does not work at all.
What version of
On Tue, Apr 26, 2011 at 4:46 PM, Stuart F. Biggar
stuart.big...@optics.arizona.edu wrote:
snip
SunRay is (I think) 5.1.2 - I see that 140994-07 is installed.
Yes, if it has the -07 patch then it's 5.1.2.
However, if I disconnect the network cable from the 280 QFE interface
and plug it into
On Wed, Apr 27, 2011 at 2:22 PM, Erik Riedel riedel.e...@gmail.com wrote:
Unfortunately I didn't find the source of this problem. Only thing I
recognized is that sometimes only one user gets locked and
sometimes several users get locked.
One thing you (both) might check is whether the 'MTU'
On Thu, Apr 21, 2011 at 12:13 AM, lars.tunkr...@bredband.net wrote:
which PAM entries in /etc/pam.conf would be used for smartcard
selfregistration ?
The PAM service name used by the self-registration application is
'utselfreg'. This should be explained in a manpage, but I don't see
On Fri, Apr 8, 2011 at 1:19 PM, Rodney Sparapani rspar...@mcw.edu wrote:
On 04/ 7/11 11:44 AM, Rodney Sparapani wrote:
We've been using a Solaris 10 SRS server for 3 years. However,
now we need to diversify our resources. We have a new Dell
server with RHEL 5 that we are going to offload the
On Mon, Apr 4, 2011 at 1:48 AM, Hagen Heiduck hagen.heid...@yahoo.de wrote:
after upgrading to SRS 5.1.2 on Solaris x64 I've been noticing a lot of the
above files (currently about 2,000), which seem not to vanish at all. What
are they good for, and is it possible to prevent their creation?
On Thu, Mar 3, 2011 at 2:34 PM, Art Peck arthurp...@aol.com wrote:
How can a DTU be referring to a negative port number, like these??
Mar 3 15:38:41 [172.16.2.219.2.2] 0x0.0x4a28efe 0:14:4f:e4:cf:80 Network:
DHCP Renew: state 6 next ticks 162/162 result 1
Mar 3 15:38:52
On Mon, Feb 14, 2011 at 11:01 AM, Art Peck arthurp...@aol.com wrote:
Anyone know what ddcconfig=2 in the utauthd log entry means?
It means that the DTU has been told by the server to ignore DDC and to
drive a specific timing signal to the monitor. The other possibilities
are 0, meaning that no
On Mon, Feb 14, 2011 at 10:56 AM, Art Peck arthurp...@aol.com wrote:
Any clues, troubleshooting ideas, RTFM's, etc gratefully appreciated! I have
looked every place I can think of and found nothing. Next step is to reboot
all the servers to see if that gets them back in sync.
I'd start by
On Tue, Jan 25, 2011 at 7:39 PM, Wim Coekaerts wim.coekae...@oracle.com wrote:
Not sure what you mean by that. These patches are actually full software
bundles. if you download the below mentioned 5.1.2 patch or 3.2.2 and
install just that on a new system, it's a full install. it's not just a
On Mon, Jan 24, 2011 at 8:04 AM, Craig Bender craig.ben...@oracle.com wrote:
On 1/24/11 7:19 AM, Art Peck wrote:
I'm seeing many occurances of:
Jan 24 03:03:15 [172.16.14.211.2.21] 0x0.0x6ec757c 0:21:28:3b:9:6c
Application: badlist_check 172.16.1.6 0
in my messages file.
Have you asked the
On Thu, Jan 20, 2011 at 2:14 AM, kevin kim kevin.k...@gmail.com wrote:
if SunRay servers are in th NAT area and user connecting from WAN, is it
possible to correctly operating for SunRay loadbalancing??
If the Sun Ray servers are behind NAT then load balancing and other forms
of redirection
On Tue, Dec 7, 2010 at 7:10 AM, CJ Keist cj.ke...@colostate.edu wrote:
Anyone have any success stories getting the following vertical USB mouse
to work on Sunrays? This is a Evoluent vertical USB mouse. The problem is
it move horizontally and up just fine. But doesn't move downward. so
On Tue, Nov 30, 2010 at 10:33 AM, Craig Bender craig.ben...@oracle.com wrote:
Corona P9 is Sun Ray 2 family firware. P10 is the rev for Sun Ray 3 and
you'll need the latest patch from SRSS 4.2.
P9 firmware is for the Sun Ray 3 Plus. P10, as you say, is for the SR3
and SR3i. (P10 images prior
On Fri, Nov 19, 2010 at 4:39 PM, Nishimura, Scott L (IT Solutions)
scott.nishim...@ngc.com wrote:
I tried to install SRSS 4.2 [which came from a SRS 5.1 download] on a
newly-built SPARC Sol10/u9 machine and it failed because the java
installed was 1.5 and the installer wanted = 1.6.
[I don't
On Sun, Oct 17, 2010 at 1:17 PM, Dark Bass darko...@gmail.com wrote:
I am having issues with this. I connect to to windows either with UTTSC or
Vmware View agent it doenst work. The internal speaker of the DTU keeps
playing. I know it works with Oracle VDI kiosk so there must be a fix or
On Fri, Aug 27, 2010 at 8:22 AM, Patrick 3corne...@gmail.com wrote:
utauthd: Worker1 NOTICE: AuthRecord:redirect:: Redirecting terminal
IEEE802.002128762476 to a trusted host ac10022f
utauthd: Worker1 NOTICE: Redirecting with params:
On Thu, Aug 26, 2010 at 4:23 PM, Art Peck arthurp...@aol.com wrote:
We're encountering errors when trying to install 140994-03.
Here is the error we receive when running the patchadd command. This error
is repeated for the entire packages bundle.
Version of package SUNWlibusbut from
On Tue, Aug 24, 2010 at 8:15 AM, Juarez, Marc mjua...@qualcomm.com wrote:
Has anyone been able to configure the sunray3+ to support a session at
2560x1600 @ 60Hz on a 30” monitor?
The 3+ should drive that timing automatically if the monitor reports
(via DDC) that it's the monitor's preferred
On Sat, Aug 21, 2010 at 4:28 AM, Sean Clarke
sean.cla...@sec-consulting.co.uk wrote:
22D points me towards something fundamental with the services (26D I think
would be the gdm config) - I'd be happier if it was gdm!! :o)
I get errors like:
./utpolicy
ERROR: Could not retrieve policy.
On Fri, Aug 13, 2010 at 5:18 AM, Alexander Koponen
kopo...@mittag-leffler.se wrote:
Another thing I was wondering, why is SRSS 4.2 manual only as wiki while 4.1
was avail as PDF
PDFs are available through the 'Printable PDFs' link in the wiki's left
sidebar. The URL is
On Thu, Aug 12, 2010 at 1:54 PM, Aaron Wilson aa...@ernieball.com wrote:
We just got some new generic optical usb 3 button mice where the
middle mouse button is a scroll wheel.
We're not talking high quality mice here but the scroll wheel works if
I plug it directly into one of our Sun Ray
On Tue, Aug 3, 2010 at 1:18 PM, Nishimura, Scott L (IT Solutions)
scott.nishim...@ngc.com wrote:
Running “kioskuseradm extend” has no impact on currently running sessions,
correct?
Yes, that's right. 'extend' adds more accounts that can be used by
future sessions. Existing sessions continue
On Sat, Jul 24, 2010 at 12:48 PM, The Loeki the.lo...@gmail.com wrote:
I'm pretty sure a more recent version of Sun Ray had a patch in it to fix
this.
That's right. Patch 141176-01 for Kiosk in SRSS 4.1 delivers the
fix for CR 6764078, Sun Ray kiosk hangs on find in
cleanupTempFiles() if
On Wed, Jul 7, 2010 at 11:03 AM, JKG jkgr...@yahoo.com wrote:
I have a 2FS with two Dell widescreen(16:10,1680×1050) connected and I've
been asked to lower the resolution so that the users can see things better.
I've tried using utresadm to set a default resolution for the DTU for all
tokens.
On Fri, Jul 2, 2010 at 11:19 AM, Arthurpeck arthurp...@aol.com wrote:
I think I want to make root the owner and set perms to 600. Two questions,
will that work? And is that a good idea?
It won't work with the normal Solaris TFTP server. It runs with user ID
nobody and only allows clients to
On Tue, Jun 22, 2010 at 9:28 PM, Michael Jinks mji...@uchicago.edu wrote:
Okay, I feel dumb asking, but so far I can't find a setting, either in
GNOME or in the Sun Ray command line tools, for controlling how much
idle time to allow before the screensaver kicks on. Based on how the
On Thu, Jun 10, 2010 at 12:04 PM, Aaron Wilson aa...@ernieball.com wrote:
We're getting ready to launch some new RHEL5 Sun Ray servers and we're
coming over from Solaris SRSS.
On Solaris from time to time we'd launch /usr/sadm/admin/bin/dhcpmgr to
release dhcp instances.
How does one
On Fri, May 21, 2010 at 8:11 AM, Niki W. Waibel niki.wai...@gmx.net wrote:
is it possible to change CTRL+PAUSE hotkey combination to sthg else?
when using
http://en.wikipedia.org/wiki/Happy_Hacking_Keyboard
there is no PAUSE key, so i'd like to redefine this.
On a similar compact keyboard
On Tue, Apr 20, 2010 at 10:45 AM, Bryan Gawronski
bgawron...@albrightknox.org wrote:
Over the past 2 weeks I have had a total of four SunRay 270 fail because
the NIC stopped working correctly. All four terminals boot ok and begin to
look for an IP but if you look at the NIC on the back only
On Thu, Apr 8, 2010 at 4:18 PM, Justin Beeler jus...@jbeeler.com wrote:
And there you have it from the horses mouth
That's a first. I'm more used to being compared to a completely
different part of that animal.
OttoM.
__
ottomeister
___
SunRay-Users
On Thu, Apr 8, 2010 at 4:56 AM, Justin Beeler jus...@jbeeler.com wrote:
Yes and yes. Much better graphics in this model plus it can support up to 4
monitors. Better audio too.
2 monitors, not 4.
Perhaps you're misinterpreting the dual-link DVI capability.
Dual-link means that the SR3+ can
On Sat, Mar 20, 2010 at 4:08 AM, Craig Hummer craig.hum...@cnt.co.uk wrote:
We have been having issues with one of our sites.
2 x SRSS4.2 running SRWC2.2 in a failover group.
I have patched to date but am still having an issue were sessions are
created on one server then after a time the
On Tue, Mar 2, 2010 at 12:22 PM, Steven Gelsie steven.gel...@jhuapl.edu wrote:
We have several multihead units and we are planning to
upgrade to srss 4.2. Has this issue with the cursor and
mouse been resolved ? Our Sunray server are Sparc
boxes running solaris 10.
As far as we know, bug
On Tue, Mar 2, 2010 at 1:09 PM, Erin Powers e...@lanl.gov wrote:
Does anyone know if there was ever any resolution to this issue?
AFAIK no changes have been introduced to provide support
for this device. It's possible that it could suddenly start
working some day because of changes made for
-bit binary, right?
OttoM.
__
ottomeister
Disclaimer: I am employed by Oracle. The statements and opinions
expressed here are my own and do not necessarily represent those of
Oracle Corporation.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
as this
mailing list.
OttoM.
__
ottomeister
Disclaimer: These are strictly my own opinions. I work for Oracle but
I do not speak for Oracle.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
the advertised firmware
version after the patch has been installed were not followed. After installing
the new patch on all systems in the SRSS host group you're supposed to
run:
/opt/SUNWut/sbin/utfwadm -A -a -V
to start advertising the new firmware.
OttoM.
__
ottomeister
Disclaimer
/x86 then the appropriate
patch ID would be 120880.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
on the command line.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
of
locally-configured defaults set by 'utxconfig -a' or 'utxconfig -A'. The result
should be identical on all of the servers in the group.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
in the doc that shows the syntax for this (unless I’m missing it).
Use utxconfig to do that. See
http://www.filibeto.org/pipermail/sunray-users/2009-July/013162.html for a
more long-winded discussion.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer
of other cruft.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
that increasing these tunables could
hurt, by delaying notification -- and therefore retransmission -- of lost
segments. That's something to worry about if you're using RDP or X11over
lossy connections.)
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer
certain about what's supposed to go into this file then just
do this:
echo 'frasse netmask + broadcast +' /etc/hostname.e1000g0
and then reboot.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay
the SRS5 EA2 download and publish that to your Sun Ray
units.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo
time!
Doesn't Debian use 'dash' to implement /bin/sh? What does 'ls -l /bin/sh'
show on this system?
If /bin/sh points at 'dash' then does the pipe-inside-quotes expression work
in dash?
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer
multihead
user. Perhaps someone with more multihead experience can help with
this one.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org
On Fri, Oct 23, 2009 at 4:32 PM, Joe Reid jr...@vnet.net wrote:
ottomeister wrote:
As the discussion in the 'Which OS' thread says, lots of little OSol
niggles have been fixed in 4.2.
I've found another hiccup. I just installed OSOL b125 and 4.2 EA and what
I'm missing is a dhcptab
intranet
then you must use 'utadm -A'. If you aren't trying to set up DHCP for Sun
Rays on that subnet but just want SRSS to allow connections from DTUs
on remote subnets then use 'utadm -L on'. Either way, SRSS should have
no problems using the aggregated interface.
OttoM.
__
ottomeister
having to first kill
somebody else's session. It will also let people resume their session on
any terminal. You'll have to decide whether that's a good thing or a bad
thing for your particular deployment.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer
) and possible core dumps, will be on the Solaris
machine that is running SRSS. So 'coreadm' can be used to
gather core dumps in a specific location.
If core dumps are being generated then 'pstack' on those files
will tell us whether this is the same issue as the Matlab crash.
OttoM.
--
ottomeister
to be all displays.
Any ideas?
Is dtlogin running? (What does 'svcs -x cde-login' show?) A fresh install
of S10 defaults to having very few services running.
Are there any interesting messages in /var/dt/Xerrors?
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my
.)
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
three servers. The web GUI basically shows a fancy presentation
of the 'utgstatus' output, so until 'utgstatus' is happy the web GUI
won't be happy either.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer
multicast and broadcast are disallowed
or flaky. If you end up needing to use that then you'll need to do
a (warm) restart of all of the servers to get them to pick up the
target list.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer
=6799655 ?
That bug was supposed to have been fixed in build 110 but several people
have reported that they still need to use the workaround in order to get
SRSS to work.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer
-unix/
drwxrwxr-x 2 root root1788 May 22 17:18 /tmp/.X11-pipe/
on this Sun Ray server.
You can change it if you like. If you want it to always be world-writable
then use an rc script or SMF service to create it and/or chmod these
directories at boot time.
OttoM.
__
ottomeister
this because it can fail in a
surprising way. If you decide to take this approach then the
range of DHCP addresses should be at least double the number
of Sun Rays that you intend to deploy onto this interconnect.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my
.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
can't count on any particular quirk
or bug of the 170 implementation being present in any other model
of Sun Ray.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users
/dtlocal is just symlink to /dev/null. It's a kludge that gets put
into place by dtlogin. Nothing in SRSS cares about it, and as long
as dtlogin is not being used nothing outside SRSS should break
if /dev/dtlocal doesn't exist.
Likewise for /dev/dtremote.
OttoM.
__
ottomeister
Disclaimer: These are my
specific Sun products until after the
deal closes in a couple of months.
Until we hear otherwise we're moving ahead with the same plans and
schedules and roadmap we had before any of this happened.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer
.
This usually means that the running kernel reports a version string
that does not match the version of the kernel driver build tree on
the system.
What does 'ls -l /lib/modules' show?
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer
a '-mount' option to those 'find' commands. That's
the fix that will be delivered in the next kiosk patch.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http
decide
to try this and you get it working, it'd be interesting to see what packages
you had to add.
OttoM.
__
ottomeister.
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http
on a Sun Ray 170 then make
sure you're using the port that understands RTS/CTS flow-control
signalling, in case the printer depends on those to prevent data loss
through overflow. That's Port B. Port A on the 170 does not understand
RTS/CTS.
OttoM.
__
ottomeister
Disclaimer: These are my opinions
from windows RDP client
It is patched in 127556-02 for Sun Ray Connector for Microsoft Windows 2.0
but I can't find any info for version 2.1.
Both of these were fixed in SRWC 2.1 during its development phase,
so the fixes are in the 2.1 product release.
OttoM.
__
ottomeister
Disclaimer
processes start using the
modified values.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
For a little more added information, here is how OSSEC is determining
that these ports are hidden:
The way we detect hidden ports is the following:
1- Try to bind
to use 'utxconfig -a -r 1024x768' to force the size of the
X desktop to 1024x768 and then let the DTU choose the most
suitable timing from the list of timings that the monitor supports,
as reported via DDC.
Will this be persistent for newer Sun Ray thin clients deployed?
Yes.
OttoM.
__
ottomeister
) If you are running Solaris 10 older than Solaris 10 8/07,
do an OS upgrade to Solaris 10 8/07 or newer.
SRSS 4.1 requires at least Solaris 10 05/08.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay
' to see the font path.) What happens if you change the
Xnewt font path to match the other X server? (Use 'xset fp=...' to
redefine the font path.)
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay
the usual
24-bit DirectColor visual, but 8-bit is very limiting. The 8-bit
visual is not supported by the Xnewt X server, that's 24-bit only.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing
in the shell's manpage that will cause the shell to
skip reading /etc/profile.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman
happens if you log in to the failsafe session and then run the
WindowMaker session startup script?
What happens if you try to log in to the WindowMaker session on
the server's console or from a remote X (XDMCP) connection?
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak
.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
server, anyone can help?
Where that wiki page says:
Enable DHCP If Necessary
what did you do? Is the DHCP service enabled on your system, and is
the 'in.dhcpd' process running?
What does 'utadm -p' show?
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer
.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
for the 2FS that lets it drive [EMAIL PROTECTED] That
timing, and the frame buffer geometry changes that go with it, is
not supported by the regular 2FS product firmware.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer
clocking. So the answer is no, the SLE4442 can not be used for
hotdesking.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman
On Fri, Oct 17, 2008 at 12:21 AM, Philippe Bourdeu d'Aguerre
[EMAIL PROTECTED] wrote:
Le vendredi 17 octobre 2008, ottomeister a écrit :
I wonder whether 'mkfifo' has become a shell builtin in the version of
'ksh' on this CentOS system. Philippe or Christian, perhaps you could
run
On Fri, Oct 17, 2008 at 1:08 AM, Christian Drexler
[EMAIL PROTECTED] wrote:
On Friday 17 October 2008 00:24, ottomeister wrote:
rpm -q ksh
builtin
Hi Otto,
heres the output you requested:
[...]
Thank you. That's consistent with Philippe's response too,
so it rules out a shell builtin
when you upgrade.
As a workaround you could define the group, using whatever
numeric ID you like, before you run 'utconfig'. If the group already
exists then the kiosk configuration dialogue will ask you whether you
want to use that existing group.
OttoM.
__
ottomeister
Disclaimer: These are my
.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
to a sane state. This will kill all of the
Sun Ray sessions.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo
by the Sun Ray.
So, what does a 'snoop' of UDP traffic to the Sun Ray's IP address show?
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http
of the Sun Ray unit, and what does 'utadm -l'
show on the server?
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray
' for details.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
around the X
bugs, nv_97 should work. All unsupported.
If you want official support from Sun then it needs to be S10.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users
On Fri, Aug 22, 2008 at 4:04 PM, Joerg Barfurth [EMAIL PROTECTED] wrote:
ottomeister schrieb:
A known issue in nv_96 is that some X binaries were incorrectly
built so if you want to use SRSS on 96 you'll need to fix those
binaries by using 'elfedit'. This bug has been fixed in nv_97
assigned to solve them.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
to proceed.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer.
___
SunRay-Users mailing list
SunRay-Users@filibeto.org
http://www.filibeto.org/mailman/listinfo/sunray-users
then
utadm fails.
Please post the results of running the following commands
on this system:
/bin/hostname
/bin/nawk 'FNR=1 {printf(%s: %s\n,FILENAME,$0)}' /etc/hostname.*
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer
smaller. If we were starting from a clean slate then
I expect we'd choose to not ask these questions at install time
and always deliver all of the web GUI localisation packages.
OttoM.
__
ottomeister
Disclaimer: These are my opinions. I do not speak for my employer
1 - 100 of 552 matches
Mail list logo
