Re: [vdr] Which DVB-S / DVB-S2 cards are recommended?
Date: Fri, 7 Aug 2015 04:43:32 -0300 From: chrodrig...@gmail.com To: vdr@linuxtv.org Subject: [vdr] Which DVB-S / DVB-S2 cards are recommended? Hello! I'm new to satellite systems, so I would like to buy a cheap card, considering decrypting streams. The question is about which hardware is recommended to run with VDR, that can decode encrypted traffic Considering that not all *official* CI-modules are supported, I'll go for the assumption it is. But from personal experience you really can't go wrong with DVB-adapters proviced by MYSTIQUE, DVBSky and/or DIGITAL DEVICES. IMHO stay away from TBS devices, I have horrible experiences with the drivers for the TBS5980 and some other models. Although the opensource drivers are better, the cards are far from stable. Thanks in advance! -- Lic. Christian A. Rodriguez @car_unlp Niels ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Using a rasberry pi as vdr client
Date: Thu, 28 May 2015 19:19:13 +0200 From: bir...@free.fr To: vdr@linuxtv.org Subject: [vdr] Using a rasberry pi as vdr client Hi I want to use raspberry pi as if it were a graphic card : I mean the dvb devices on a PC style server, IR receiver preferably on the server too (rpi and server in the same room) Considering your RPi is going to be the frontend, my best guess would that your IR receiver must beconnected to your RPi. I don't know how to configure it, there is apparently 2 ways of doing it (from what I understood) + xineliboutput with vdr-fbfe (rpi plugin is closed source ? the one here : http://www.vdr-portal.de/board18-vdr-hardware/board98-arm-co/118588-rasperry-pi-xine-plugin/) I don't have any experience with this solution, but I think I now have something to do this weekend ^^ + streamdev and rpihddevice (which additional plugins ?) The second way seems to be more complicated to configure, and I'm not sure it suits my project, but the rpihddevice is well maintained though. The easiest way to get the 2nd solution running has to be the MiniDVBLinux distribution (http://www.minidvblinux.de/) for your RPi v1 or v2. While the site and parts of the software is in German, I was able to get it up and running quite easily. The first solution is perhaps much straightforward and includes a media player (?) That sounds correct. Could you tell me more please ? Well, I really liked the MLD distro with my old RPi v1 and a MCE remote. The zapping speed was quite good andissues were minimal. Then again, I tested this like 3 months back; so my guess would be that there are quite a number of improvements made since I last tested this. Damien Regards, Niels Wagenaar___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Local frontend - using XBMC strm vs vdr-sxfe
2012/3/9 Dominic Evans oldma...@gmail.com: Hi all, -- SNIP -- Does anyone have vdr-sxfe running flawlessly as a local frontend for HD content? I use a fully updated yaVDR 0.4 and I don't have any issues with the vdr-sxfe frontend. For me, XBMC with the xvdr plugin seems to produce very ackward results and most of the time I'm not able to watch anything because it's still synchronizing the channels. BTW, you do know that can play all kinds of media (including DVD's) with vdr-sxfe right? I use vdr-sxfe because it's one of the few frontends which allows mediaplayback without any additional plugins. I just wish I could have the full VDR OSD, but within XBMC :) That'll never happen ^^ Cheers, Dom Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Local frontend - using XBMC strm vs vdr-sxfe
2012/3/9 Dominic Evans oldma...@gmail.com: On 9 March 2012 10:09, Niels Wagenaar n.wagen...@xs4all.nl wrote: Hmm. I have the same (yaVDR) running on an ION330 box. The channels I most have problems with are 1080i HD at bitrates of around 9-10 MB/s. Perhaps you could post your ~/.xine/config_xineliboutput to http://gist.github.com or http://paste.ubuntu.com ? I use an Asus AT3N7A-I mainboard with the TT 3650-CI which is an ION330 configuration as well and I frequently watch 1080i channels from my provider (Canal Digitaal) without any issues at all. The only issue I have is that the buffering is slower then my old Reel Multimedia ExtensionHD configuration, so it takes somewhat longer to get a picture (max 5 sec). My xineliboutput configuration is default, I didn't make any changes to it what so ever. Yes, I don't use the xvdr plugin as it is still very buggy. I simply take the playlist of channels from streamdev (available at http://example.com:3000/ on your vdr box) and generate .strm files [1] which I access from a vanilla XBMC Eden via the Videos -- Files browser. I'll check this tomorrow and post my experience using this method. Yep I did know about these, but XBMC provides a much richer experience for DVD, Blu-ray playback. e.g., cataloguing and display of a library, automatic display framerate switching etc. XBMC does indeed provide a much richer experience and it's a very powerfull frontend. However, personally I don't like the PVR integration in its current state and it produces all kind of WAF-issues ;) Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] System unresponsive and picture breakup with VDR 1.7.10 and Tevii S660 (USB)
2010/3/13 Artem Makhutov ar...@makhutov.org: Hi, Greetings! I had the same issue. The system was freezing several times per minute for a few seconds. Yep, this sounds as the same problem I have/had. All of this drivers won't work. The only working driver for me was called something like this: 09X_tevii_x.rar Unfortunatly this driver does not build with kernel 2.6.33 anymore. So I have to stick with 2.6.32-gentoo-r6. I use Xubuntu 9.10 and that has 2.6.31. 2.6.33 and higher wont't do for me, because the nvidia kernel driver won't compile on 2.6.33 and higher. Would you be willing to tar, compress it and upload both drivers somewhere? You may also mail them to me, my mailbox is quite large and can handle large attachements. Files sent. Got them, installed them. Issues gone! No freezes, no picture breakups, etc. Thank you very much for the drivers! :-) Regards, Artem Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] A/V out of sync for a lot of channels
2010/3/12 Günter Merz lotan...@hotmail.com: For me the frontend doesn't seem to make a difference: - vdr-xine/xine-ui - vdr-xine/gxine - xineliboutput show the same behaviour. Can I ask which xine-lib version is behind your xineliboutput? You may :) I use the regular xine-lib version from the VDR Team PPA (1.2.0+hg+vdpau+r285+crop+v11-1tvt6). The only thing I compiled by hand (using the vdr pre-patched sources from the VDR Team PPA), is the xineliboutput plugin. Since I wanted to use the latest CVS edition. I only have an other issue now... But I'll reserve that for a new thread. Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] System unresponsive and picture breakup with VDR 1.7.10 and Tevii S660 (USB)
Hello All, For a couple of months I'm very happy with my new Asus ION/330. But last week I decided to swap my Hauppauge NOVA-HD-S2 for an USB based Tevii S660. The reason, I wanted to get me a new HTPC enclosure and to use my Reel ExtensionHD (the Asus ATN37A only has one PCI-slot available). I use the The VDR Team PPA builds (VDR 1.7.10) with the latest CVS of the xineliboutput plugin. Now I encounter a strange problem. During the start of VDR I encounter system unresponsiveness. It hangs a bit, like if the CPU is at 100%. However, top doesn't show me anything out of the ordinary. And it seems to happen on SDTV (for example BVN) and HDTV (for example ArteHD). As a result, during LiveTV using vdr-sxfe, I encounter picture breakups. I tried removing all of the non-essential plugins and swapping xineliboutput for vdr-xine, but I have the same problem. I tried the official Tevii drivers as well as the drivers from s2-liplianin. The only thing I didn't try, is upgrade to VDR 1.7.13. But before the DVB-device swap it worked great, so I don't see a reason to upgrade I haven't build the reelbox stuff yet, so the EHD is *not* configured in my system. I'm a bit reluctant to remove the EHD since I just made everything nice (enclosure and furniture). Also, I tested my configuration with MS Windows in combination with DVB Viewer Pro and no issues. And a fast test with TVHeadend doesn't seem to give issues also. So it must be VDR in combination with my Tevii S660 USB device. Has anybody seen this kind of behaviour and have a solution or something else for me to look at? Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] System unresponsive and picture breakup with VDR 1.7.10 and Tevii S660 (USB)
2010/3/12 Niels Wagenaar n.wagen...@xs4all.nl: I haven't build the reelbox stuff yet, so the EHD is *not* configured in my system. I'm a bit reluctant to remove the EHD since I just made everything nice (enclosure and furniture). Also, I tested my configuration with MS Windows in combination with DVB Viewer Pro and no issues. And a fast test with TVHeadend doesn't seem to give issues also. So it must be VDR in combination with my Tevii S660 USB device. Ok, I removed the ExtensionHD. This didn't solve the problem. Then I decided to put an old TT 1500-S in and now it works. I also found out that TVHeadend experienced the same problem. Upgrading VDR didn't resolve the issue. So I guess it's a problem with the Tevii S660 (as I thought). And I found that other have curious problems as well. *sigh* Oh well, time to find an other DVB-S2 based USB device. Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] System unresponsive and picture breakup with VDR 1.7.10 and Tevii S660 (USB)
2010/3/12 Artem Makhutov ar...@makhutov.org: The S660 works well for me. Yes, I read this for many people. As well that others have issues with it. It is a problem of the drivers and/or firmware. I had also the same problem. I thought it was a driver issue. The only working driver for me is the official driver from the TeVii website and also just an older version. Unfortunaly I have deleted the original .rar so I can't tell you the exact version I am using right now. The s2-liplianin drivers do not work reliably. I tested the drivers from: - Tevii drivers called 100302_linux_tevii_ds3000.rar - s2-liplianin - v4l I made no difference, with all drivers I encountered the same issue. Picture breakup and at that time the system becomes inresponsive during a SSH session. Would you be willing to tar, compress it and upload both drivers somewhere? You may also mail them to me, my mailbox is quite large and can handle large attachements. Regards, Artem Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] A/V out of sync for a lot of channels
2010/3/10 Jörg Knitter joerg.knit...@gmx.de: I have seen the same problem on german channels - but not on all, and I found a common sense: - channels with MP2 audio: sync ok - channels with AC3-5.1: sync ok - channels with AC3-2.0: not always in sync, playing back and forth helps, there also seems to be a drift over time I am using yavdr 0.1.1 (http://www.yavdr.de) which also includes XBMC which is not based on xine. I haven´t seen any sync problems here so far. I watch Channel4 a lot and I don't have any issues with it using xineliboutput or my Reel HDe (read: it's not noticable). But if you could tell mee the German channels, I could check with those as well. With kind regards Joerg Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] 10 Year Anniversary of VDR
Congratulations VDR, Klaus and every person who contributed to VDR in any way possible! I can honestly say that about 2 years ago I didn't use VDR, because I thought it required a Full DVB card. But since I wanted to watch HDTV, I decided to gamble and buy a HTPC instead. So that I could be more flexible, it was cheaper then a dedicated HDTV receiver (which in total costed me more then I anticipated, but hobby costs money anyway) and it was more future proof. In the beginning I started using some awkward Windows applications (MCE, Media portal, DVB Viewer Pro) and Myth TV, but it wasn't quite what I wanted and I was planning to sell my HTPC. Then I discovered that I could use VDR in combination with a softdevice-plugin, I've never gone back to other options. Ok, I still test some new hard- and software but still I keep coming back to VDR. And yes, that's a major compliment :). Regards, Niels Wagenaar On Fri, Feb 19, 2010 at 5:09 PM, Klaus Schmidinger klaus.schmidin...@tvdr.de wrote: It has been exactly 10 years since version 0.01 of VDR (originally named OSM - On Screen Menu) was released. I want to use the occasion to thank everybody who has contributed to VDR, but also those who simply use VDR in their every day life. I for one couldn't imagine watching tv without VDR any more. Special thanks go to the people running the VDR-Portal (www.vdr-portal.de). Originally I intended to release version 2.0 of VDR at the 10th anniversary, but as ever so often, I ran out of time. But I'm still on it - stability comes before deadlines ;-) I hope you don't think I'm blowing my own horn here, I just didn't want the date to pass by without a remark... Klaus ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Replay Problems with Extension HD
Op Za, 5 september, 2009 18:11, schreef VDR User: -- SNIP -- It sounds like the eHD is the most expensive solution in all areas; time, money, patching, etc. Whereas, vdpau seems to be at the other end of the spectrum being the least expensive, easiest, and so on. Depends on how you look at it. I got mine for almost 1,5 years now and I've been able to see and hear HDTV without problems. Yes, the other plugins for mediaplayback seem to have problems with a vanilla VDR setup. But currently I use ReelVDR anyway and it works like a charm and without the problems I have with a vanilla VDR setup ;) I've got 3 boxes running vdpau, all with different hardware and my experience has been the same with each setup.. It was a piece of cake and took almost no time to get going. Now I guess it's the guy who had a horrible experience turn to tell his story. ;) I've been experimenting with VDPAU for a while. And yes, it's the next big thing when it comes to hardware accelerated playback. But since I need to put in an additional NVIDIA based videocard with Purevideo HD capabilities, I rather use my onboard intel for X.org and stick to my eHD until I have the money to get me a Atom based device with an ION chipset :) Regards, Derek Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Replay Problems with Extension HD
Op Vr, 4 september, 2009 19:39, schreef VDR User: All I'm saying is you seem to have a hardware problem that should be addressed @ the vendors customer service/product support. Have you even bothered to contact them? Maybe there's already a fix/solution waiting for you there. IMHO, that's not a correct assumption to begin with. For your information, I don't have this problem with ReelVDR in combination with the same plugins. As a matter of fact, I don't encounter none of the issues I have with the vanilla vdr 1.7.x using the same plugin-versions. So a correct assumption would be, that this problem may be the result of a bug in the reelbox plugin as well as the other eHD plugins. However, more then a month ago my HTPC broke down as well as my tv-furniture and TV (plasma fell down and took the HTPC with it). But currently I'm awaiting my new hardware and I hope to do some more testing after the weekend. Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] ExtensionHD and VDR 1.7.6
Op Zo, 31 mei, 2009 11:47, schreef Magnus Hörlin: Seppo Ingalsuo wrote: I have to agree that the vdpau deinterlacers are better than the tvtime ones, including the temporal only deinterlacer that is used for 1080i. But it is as you say a little annoying that paused images are not deinterlaced. I use the ION platform with 9400M. /Magnus H Yes, the deinterlacer works much nicer in combination with VDPAU. But with VDPAU I have two issues and this is why I haven't upgraded to VDPAU completely as off yet: 1. The maximum usage through VDPAU is in my case an additional 50W (compared to the ExtensionHD with a maximum of 10W) because I've got a PCI-e based videocard; 2. Using plugins like vdr-xine and/or xineliboutput you have buffering time which is annoying for zap speeds on encrypted channels. Currently I use the Reel-VDR fork and it seems to work quite nicely. And it doesn't require many patches to get it working, only some S2API based patches. Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Compilation issues with recent DVB header files vs libc6
Op Do, 9 april, 2009 08:29, schreef Matthias Becker: According to my information (a message on the linux-dvb mailinglist), the old mailinglists (V4L and DVB) are now merged into linux-media. what does merged mean? Are Posts on the old list replicated to the new one? No. Merge as in combined to one and/or a replacement for the old V4L/DVB mailinglists. Messages send to the 'old' mailinglists will not automaticly be available on the linux-media mailinglist. That is, if you don't count a CC as a replication method ;-) Regadrs, Matthias Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Compilation issues with recent DVB header files vs libc6
Op Wo, 8 april, 2009 15:04, schreef Klaus Schmidinger: On 04/08/09 15:00, Matthias Becker wrote: Hi, is the linux-dvb ML still alive? maybe http://vger.kernel.org/vger-lists.html#linux-media is read more frequently That one has way too much non DVB related traffic for me. Klaus According to my information (a message on the linux-dvb mailinglist), the old mailinglists (V4L and DVB) are now merged into linux-media. The V4L/DVB mailinglist are infact not used any more for patches (and a global statement was made to send those patches to the linux-media mailinglist) and I haven't seen any of the developers being active on it for some time. Full information was made in early January I believe. More information is available on the Linuxtv.org frontpage [1]. Regards, Niels Wagenaar [1] http://www.linuxtv.org/news.php?entry=2009-01-06.mchehab ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] why I must first compile xine-lib£¬not f fmpeg?
Op Ma, 9 februari, 2009 08:07, schreef LinHai: when I first compile xine-lib is OK£¬second compile ffmpeg is OK. IF I first compile ffmpeg is OK£¬second compile xine-lib is failure. the syslog: make[2]: *** [xineplug_decode_faad_la-xine_faad_decoder.lo] Error 1 make[2]: Leaving directory `/root/xine-lib-1-2-926ee2edf0d8/src/audio_dec' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/root/xine-lib-1-2-926ee2edf0d8/src' make: *** [all-recursive] Error 1 why ,who can tell me? Based upon assumption, I think you're using the SVN/Trunk editions of xinelib 1.2 and FFMpeg. In that case, it's simple. In your first 'example' xinelib links/compiles to an older and allready installed version of ffmpeg, you then install a newer version of ffmpeg (prepare for problems with xinelib!). With your 2nd 'example' you've updated ffmpeg first and then xinelib will try to compile/link against the updated ffmpeg libraries, which will then fail. Sollution for this is simple. Stick to the stable xinelib 1.1.x editions and *do not* use the --external-ffmpeg configure flag. I've got the feeling that the ffmpeg trunk has been updated again and that it broke the of xinelib 1.2. Figures, since it's all bleeding edge we're talking here and it has happened before ;) Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR 1.7.0 S2API - Channels not Available
Op Wo, 4 februari, 2009 13:38, schreef Ales Jurik: -- SNIP -- Hi, Hello! I have it working with some dirty hacks (reelvdr svn 10388 - the latest with hdplayer). But for the problem with sending AC3 sound to ac3dec (with -a ac3dec) I didn't have enough time to solve. With sound over HDMI it could be used. Would you be filling to upload the patch to the ML or send it to me directly? I use sound over HDMI anyway since I redirect the sound from my Plasma to my receiver. Ales Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR 1.7.0 S2API - Channels not Available
Op Wo, 4 februari, 2009 13:22, schreef Morfsta: -- SNIP -- The other problem is that I don't think anyone has got VDR 1.7.4 working with the eHD yet, which is my output device... :-( So it seems everywhere I look at the moment I am stuck. :-( This is indeed correct. The eHD (which I have in use also) seems to be very stable in 1.7.0. The versions 1.7.3 and 1.7.4 didn't give me any audio. Hopefully this will be fixed soon. Because this is the only thing keeping me from using VDR 1.7.4 :) Should VDR-1.7.0 be reporting my DVB-T frontends as DVBT when it starts up? Is there perhaps a capability flag in the driver that has not been setup for the devices that I am using? I compared the channel settings of BBC ONE in VDR with multiproto version and s2api version that I am running and they are exactly the same. I have that too, nothing to get worried about it. The DVB-T device gives out wrong supported transports (like DVBS) but the code/patch will only lock DVB-T transports with DVB-T devices. At least, during my testing ;) @Niels, which DVB-T devices are you using successfully with VDR-1.7.0 so that I can compare them with my own drivers? It seems strange though that scan-s2 successfully finds all the channels but VDR won't play them. I still think it's a problem with the channel.conf. For fun, please try using the old and default scan for DVB-T. Because I used the old dvb-scan with the option to output for VDR on my Gigabyte GT-U7000-RH based DVB-T adapter to scan for KPN Digitenne bouquets (location Zwolle/Apeldoorn). Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR 1.7.0 S2API - Channels not Available
Op Wo, 4 februari, 2009 10:16, schreef Morfsta: Hi, Goodmorning! Due to an attempt on OS upgrade and thus kernel upgrade I'm grudgingly (it worked for me for months with no issues so why would I want to change it for now?) trying to make the transition from multiproto to S2API. I have two DVB-T cards and a NOVA-S2-HD (HVR4000 lite). I have downloaded a vanilla vdr-1.7.0 applied the h264 patch and the s2api patch and install S2API from Steven Toth's mercurial repository. You might want to try Igor's repo http://mercurial.intuxication.org/hg/s2-liplianin) since Steve's hasn't been updated for over 3 months. This however won't fix your problem perse. On booting the kernel loads all the modules and I see the various frontends and when I start VDR it loads all of the relevant firmware okay. When I start VDR it won't show any of the FTA channels on DVB-T or DVB-S (not even tried S2!) and all I get is Channel Not Available. I wish VDR were more descriptive in why the channels are not available! :-) Did you install mine S2API patch from 7-10 for VDR 1.7.0? Because this is the latest version and this has been tested with DVB-T, DVB-S, DVB-S2 and DVB-C. And with succes! ;) BTW, you might want to increase the logging for VDR or check the logfiles in /var/log what VDR has thrown out (Ubuntu uses /var/log/user.log for instance). My best guess is an frontend timeout error. This means that a timeout (duh!) occured when tuning to the selected channel. This can mean a reception problem (not likely, but good to point out) or a problem in your channels.conf. Apologies if this has been asked before, but is there anything I'm missing? Is the problem that I took my channels.conf from my multiproto VDR and something has now changed in the format? The Multiproto channels.conf should be interchangeable with S2API. But *some* modulation types didn't exist in S2API when I wrote the patches and you need to check this for yourself. You need to check the settings (Red button to edit in the TV Channels overview) and see if they are indeed correct and change them accordinly. My best guess, is that the modulation types are wrong. It would be good to get this working as my old OS is now messy and really needs a clean build with a shiny new kernel and I can't patch up to date multiproto with the old HVR4000 patches (a few FAILS which I guess I could fix, but might take some time as they don't look that trivial) and an older version of multiproto from HG doesn't compile on the new kernel! Best to say, multiproto is not needed to get it al working. I've got the same kind of config as you ( NOVA-HD-S2 and a Gigabyte USB stick for DVB-T) and it works very good with S2API. Can anyone point me in the right direction on what might be going on? See the above ;) Thanks Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] compiling the xine-1.2 with external ffmpeg
Op Do, 22 januari, 2009 21:27, schreef Jouni Karvo: Goga777 kirjoitti: -- SNIP -- Good to know. The include and linking parameters for autogen.sh solved the compilation problems, and were probably my main message, though. xine-lib 1.2 hg is (I guess) compatible with an older version of ffmpeg than the repository one. Strange. I compiled x264, ffmpeg and xinelib 1.2 from the repositories like last weekend, and I didn't encounter any problems at all with the compilation. And it works without problems with vdr-xine 0.90 and the xineliboutput CVS with VDR 1.7.0. I used the following configure and autogen.sh on a Xubuntu 8.04 configuration running on a Core2Quad 6600 config with an X86-64 kernel: x264: ./configure --enable-pic --enable-shared --enable-pthread --enable-asm --extra-cflags=-mtune=native -march=native -mfpmath=sse -O4 -pipe ffmpeg: ./configure --prefix=/usr --enable-shared --enable-gpl --enable-postproc --enable-libmp3lame --enable-libvorbis --enable-pthreads --enable-swscale --enable-libx264 --extra-cflags=-mtune=native -march=native -mfpmath=sse -O4 -pipe Xine-lib 1.2 ./autogen.sh --prefix=/usr --disable-dxr3 --enable-w32dll --with-w32-path=/usr/local/lib/win32 Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] about the hvr-4000 tuning problems
Op Do, 15 januari, 2009 23:30, schreef Mika Laitio: Hi -- SNIP -- I have following in my channel conf for dvb-t and dvb-s channels: YLE TV1;YLE:546000:B8C23G8M64T8Y0:T:27500:512=2:650=fin:2321:0:17:8438:4097:0 arte;ARD:10743:hC56M5O0S0:S19.2E:22000:401=2:402=deu,403=fra:404:0:28724:1:1051:0 Concerning Arte, I've got that same setting in my channels.conf. And I'm able to see that channel instantly. Klaus, do you have any idea from which functions I should try to track more for finding the problem? I use a Hauppauge NOVA-HD-S2 and I've updated to the latest S2API drivers on the s2-liplianin repository. It uses the same kernel-driver as the HVR-4000. And I don't have any tuning problems at all on Hotbird 13.0, Astra 19.2, Astra 23.5 and Astra 28.2. This is with VDR 1.7.0 and my own S2API patch as well as with VDR 1.7.3. By any chance, did you try disabling diseqc? Because I had tuning problems when I used standard diseqc values with no retries with my diseqc 1.0 switch. I had to use the following safe diseqc commands for my diseqc 1.0 configuration: # # port 1 S19.2E 11700 V 9750 t v W15 [E0 10 38 F0] W100 [E0 10 38 F0] W100 [E0 11 00] W100 A W15 t S19.2E 9 V 10600 t v W15 [E0 10 38 F1] W100 [E0 10 38 F1] W100 [E0 11 00] W100 A W15 T S19.2E 11700 H 9750 t V W15 [E0 10 38 F2] W100 [E0 10 38 F2] W100 [E0 11 00] W100 A W15 t S19.2E 9 H 10600 t V W15 [E0 10 38 F3] W100 [E0 10 38 F3] W100 [E0 11 00] W100 A W15 T # port 2 S13.0E 11700 V 9750 t v W15 [E0 10 38 F4] W100 [E0 10 38 F4] W100 [E0 11 00] W100 B W15 t S13.0E 9 V 10600 t v W15 [E0 10 38 F5] W100 [E0 10 38 F5] W100 [E0 11 00] W100 B W15 T S13.0E 11700 H 9750 t V W15 [E0 10 38 F6] W100 [E0 10 38 F6] W100 [E0 11 00] W100 B W15 t S13.0E 9 H 10600 t V W15 [E0 10 38 F7] W100 [E0 10 38 F7] W100 [E0 11 00] W100 B W15 T # port 3 S23.5E 11700 V 9750 t v W15 [E0 10 38 F8] W100 [E0 10 38 F8] W100 [E0 11 00] W100 A W15 t S23.5E 9 V 10600 t v W15 [E0 10 38 F9] W100 [E0 10 38 F9] W100 [E0 11 00] W100 A W15 T S23.5E 11700 H 9750 t V W15 [E0 10 38 FA] W100 [E0 10 38 FA] W100 [E0 11 00] W100 A W15 t S23.5E 9 H 10600 t V W15 [E0 10 38 FB] W100 [E0 10 38 FB] W100 [E0 11 00] W100 A W15 T # port 4 S28.2E 11700 V 9750 t v W15 [E0 10 38 FC] W100 [E0 10 38 FC] W100 [E0 11 00] W100 B W15 t S28.2E 9 V 10600 t v W15 [E0 10 38 FD] W100 [E0 10 38 FD] W100 [E0 11 00] W100 B W15 T S28.2E 11700 H 9750 t V W15 [E0 10 38 FE] W100 [E0 10 38 FE] W100 [E0 11 00] W100 B W15 t S28.2E 9 H 10600 t V W15 [E0 10 38 FF] W100 [E0 10 38 FF] W100 [E0 11 00] W100 B W15 T S28.5E 11700 V 9750 t v W15 [E0 10 38 FC] W100 [E0 10 38 FC] W100 [E0 11 00] W100 B W15 t S28.5E 9 V 10600 t v W15 [E0 10 38 FD] W100 [E0 10 38 FD] W100 [E0 11 00] W100 B W15 T S28.5E 11700 H 9750 t V W15 [E0 10 38 FE] W100 [E0 10 38 FE] W100 [E0 11 00] W100 B W15 t S28.5E 9 H 10600 t V W15 [E0 10 38 FF] W100 [E0 10 38 FF] W100 [E0 11 00] W100 B W15 T Mika Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] S2-3200 vdr needed material ?
Op Zo, 11 januari, 2009 11:05, schreef Pierre-Yves Paranthoën: Hi Guys, Thanks for your help, it worked ! I'm running vdr-1.7.0 with : -- SNIP -- - and xineliboutput-1.0.3 plugin This last one causes me some pb. It looses frames. Is there a particuliar version or patch to use as it is outputing in log : video_out: throwing away image with pts 3640842 because it's too old (diff : 116836). You might want to try the vdr-xine (or xine) plugin or use xine for playback instead of vdr-sxfe. In my case, the vdr-sxfe application is rather unstable, has more problems with HDTV streams and it crashes frequently. Xine however, is very stable. In my case, I use the vdr-xine plugin and start Xine the following way: /usr/bin/xine -V xv -f -D --post vdr_video --post vdr_audio --post upmix_mono --post vdr --verbose=2 vdr:/tmp/vdr-xine/stream#demux:mpeg_pes Make sure you edit $HOME/.xine/config and edit the following items: video.processing.ffmpeg_choose_speed_over_accuracy:1 video.processing.ffmpeg_pp_quality:0 video.processing.ffmpeg_skip_loop_filter:all video.processing.ffmpeg_thread_count:4 The thread_count should be the number of CPU's you have (in my case it's four). With the above startup line and the settings in the config file, I'm able to watch 1080i HDTV streams with any problems on a Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz with a Geforce 7160 IGP (using the 180.22 nvidia drivers). Kindest regards from a really pleased vdr user ! Your welcome! :) Pierre Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] vdr-1.7.3 + reelbox plugin
Op Za, 10 januari, 2009 15:04, schreef Ales Jurik: On Saturday 10 of January 2009, Josce wrote: Hi, -- SNIP -- I've made some patch for reelbox plugin, but I was not able to get sound as well as from eHD as from PC soundcard. Same here. I just tried it, and the eHD does indeed give no sound. I allready posted it in the Reel forum. Hopefully a fix will popup some day. It seemed to be that the switching between channels is 2-3 times longer (maybe as syncearly from R.Nissl is not implemented?). I didn't encounter longer zapping times. But then again, I didn't look for it especially. So now I'm back at vdr-1.7.0 and last multiproto from Igor. Same here. I'm back to 1.7.0 until the sound-problem has been fixed :) BR, Ales Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] S2-3200 vdr needed material ?
Op Do, 8 januari, 2009 08:25, schreef Pierre-Yves Paranthoën: Hi, Could some pse tell me what kind of patch and v4l drivers i should use to run vdr-1.7.x in HD mode ? According to LinuxTV Wiki for your card (source: http://www.linuxtv.org/wiki/index.php/TechnoTrend_TT-connect_S2-3600): - Multiproto (not advisable, since it's absolete) - S2API (More precise: http://mercurial.intuxication.org/hg/s2-liplianin) And for VDR 1.7.x, you have two choices: - VDR 1.7.0 in combination with my patches from October; - VDR 1.7.3 which was released this week; If you're running a budget only system (read, no Reel eHD for hardware decoding off H264 or MPEG2) you might want to stick to VDR 1.7.0 because of some issues with the current plugins like xine and/or xineliboutput (at least, this is what I read on the ml). Beware though, VDR 1.7.0 has some audio issues with certain channels like BBC HD (which should be fixed by the implementation of TS format). Q to all : The software output plugins had problems with 1.7.1 and 1.7.2 ( and perhaps 1.7.3?). Can anybody confirm that this problem still exists? Because the reason why I don't upgrade to newer editions, is because newer versions had problems with the vdr-xine and vdr-xineliboutput plugins. thanks, regards Pierre Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Channel overview based upon Bouquet
-Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Georg Acher Verzonden: zaterdag 29 november 2008 1:50 Aan: VDR Mailing List Onderwerp: Re: [vdr] Channel overview based upon Bouquet -- SNIP -- UseBouquetList = (1 for bouquet, 2 for bouquet list). I use 0, I hate the bouquet sorting in any variant ;-) Can it be that this option isn't used with the 'regular' VDR or that it's skin dependant? Mainly because this option doesn't seem to do anything when I select channels with for instance the reelskin changing this option doesn't seem to do anything in the channels overview. In the Reel-vdr, the menu is in OSD settings (expert mode). Alas, this option doesn't exist in the regular VDR, so manual change it shall be! ;) Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] xineliboutput - invalid data
-Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Alex Betis Verzonden: zaterdag 29 november 2008 22:31 Aan: vdr@linuxtv.org Onderwerp: [vdr] xineliboutput - invalid data Hi, I'm trying to configure xineliboutput 1.0.3 with VDR 1.7.1. Compilation and installation seems to go ok, but playback doesn't work. I can see OSD in opened window, but when it gets to the channel itself CPU usage jumps to 100% and the log contains: -- SNIP -- Any ideas? You have two options: - Go back to 1.7.0; - Use the LIVEBUFFER patch by patching VDR 1.7.1 with the VDR-Extensions patch; See http://linuxtv.org/pipermail/vdr/2008-October/017948.html for more information. Thanks. Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] Channel overview based upon Bouquet
I was testing a patch which would allow the Reel-VDR sources to be compiled against multiproto. But during the test of Reel-VDR, I found out that the Channel Overview was only showing the channels in the chosen Bouquet. I do really like this option and I thought it was a option in the setup.conf. However, I'm not able to find that option. Can somebody enlighten me if this option exists or if I can re-create it with a plugin? Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] New Video Decode and Presentation API from NVidia
Op Di, 25 november, 2008 03:59, schreef VDR User: On Mon, Nov 24, 2008 at 9:46 AM, Nicolas Huillard [EMAIL PROTECTED] wrote: It's still good news to know that open-source software allowing current fanless integrated motherboards to decode HDTV at ~10% CPU is on its way... Going from 87% of 2 cores, to ~10% of an entry level CPU is good, specially when the load is taken care of by existing chips. I agree on that point. I would rather have ~10% or ~20% then the regular 57% per core on my Core 2 Quad system when I view H264 channels of my provider. Yes, I agree. Just pointing out that you certainly do not need a quad core, that's all. Also, the price of the cpu is the same whether you're using 87% or 10% of it. ;) The point is you can already have cheap HDTV without using the new Nvidia api. Well, in my case I do. When I view BBCHD, ArteHD, AnixeHD or the AstraHD channels I don't encounter many problems. Image is clear and no stutter. But as soon as I watch the 1080i/H264 channels of my provider (Canal Digitaal) on Astra 23.5e, I have major stuttering. BravaTV in HD doesn't have much problems, but NGC HD and Discovery HD is an other matter. My Core 2 Duo just couldn't handle it with FFMPeg and Xine-lib 1.2. But since I've put in a Core 2 Quad, I'm able to watch those channels even with fast moving images :) I'd like to have full-HDTV on a single x86 mini-ITX board. I'm now seeing this will happen soon enough, and I'll wait until then before I spend money on new hardware. Yes it's nice! My goal is diskless, fanless, low power consumption dedicated HDTV box. Very small, very low cost! I again agree :) I would like an additional HDTV box in my bedroom. It needs to have the options you wrote. But I don't want a Popcorn or some other kind of device. I want the option to enhance it myself (flexability) so I'm waiting desperately for GPU based decoding of H264 and VC-1 transport streams :) Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR - S2API: 2 questions
-Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Klaus Schmidinger Verzonden: zaterdag 22 november 2008 14:07 Aan: vdr@linuxtv.org Onderwerp: Re: [vdr] VDR - S2API: 2 questions -- SNIP -- Looks like there is also a newer patch posted in [vdr] [PATCH] S2API for vdr-1.7.0 (07-10-2008 - quickhack for DVB- S(2), DVB-T and DVB-C) Correct. on 07.10.2008 21:09 by Niels Wagenaar. @Niels: can you confirm that vdr-1.7.0-s2api-07102008-h264-clean.patch is your latest, greatest S2API patch for VDR? The patch from 7-10 is indeed the latest. There weren't any changes in S2API in the last weeks, which would or could my VDR/S2API patch. Klaus Regards, Niels Wagewnaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR - S2API: 2 questions
-Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Niels Wagenaar Verzonden: zaterdag 22 november 2008 14:13 Aan: VDR Mailing List Onderwerp: Re: [vdr] VDR - S2API: 2 questions The patch from 7-10 is indeed the latest. There weren't any changes in S2API in the last weeks, which would or could my VDR/S2API patch. (Damn Send button!) Which would or could break my VDR/S2API patch ;-) BTW, only DVB-S, DVB-S2 and DVB-T is really tested by me (and with great success). The DVB-C code is theory and untested. Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Problems building xine-lib on openSUSE 11.0 w/ gcc 4.3.1
-Original message- From: Goga777 [EMAIL PROTECTED] Sent: Tue 28-10-2008 10:06 To: vdr@linuxtv.org; Subject: Re: [vdr] Problems building xine-lib on openSUSE 11.0 w/ gcc 4.3.1 -- SNIP -- How did you deduce that, when Darren said that you should upgrade your xine-lib? You might even jump to xine-lib 1.2 which already includes vdr-xine plugin. does xine-lib 1.2 include vdr-pligin from Reinchard Nissl ? are you sure ? Last time I check, xine-lib 1.2 doesn't include the vdr-xine plugin. But, if you use 1.2, you don't have to patch xine-lib anymore. Xine-lib 1.2 now includes the patches for Xine-Lib so that you connect to a VDR system which is using the vdr-xine plugin. Goga Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] S2API in VDR
-Original message- From: Artem Makhutov [EMAIL PROTECTED] Sent: Fri 24-10-2008 20:56 To: vdr@linuxtv.org; Subject: [vdr] S2API in VDR Hello, the S2API is included in kernel 2.6.28-rc1. Will the S2API patches be integrated in VDR 1.7.2? If I remember correctly, Klaus will only add S2API support for VDR as soon as the TT S2-3200 based cards are supported in S2API. Mainly because, he has that card ;-) Currently, patches exist for the S2-3200. Steven waits for the official word from Manu to pull the support of S2-3200 into S2API. Perhaps it'll happen this weekend (I hope). Thanks, Artem Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [PATCH] S2API for vdr-1.7.0 (07-10-2008 - quickhack for DVB-S(2), DVB-T and DVB-C)
-Oorspronkelijk bericht- Van: Gregoire Favre [mailto:[EMAIL PROTECTED] Verzonden: woensdag 8 oktober 2008 17:05 Aan: Niels Wagenaar CC: VDR Mailinglist (vdr@linuxtv.org) Onderwerp: Re: [vdr] [PATCH] S2API for vdr-1.7.0 (07-10-2008 - quickhack for DVB-S(2), DVB-T and DVB-C) On Tue, Oct 07, 2008 at 09:09:59PM +0200, Niels Wagenaar wrote: Hello VDR's users ;-) I took some time to find this email because it was crossposted to linux-dvb and my system only kept the first one, which was the one from linux-dvb... by the way I don't see the point in sending this to linux-dvb ml). But now I have compiled my VDR with this version :-) And it seems to works aswell as with multiproto. Thank you very much for this ! You're welcome and I'm glad that everything works correctly :) Just curious. What do you watch exactly? DVB-C, DVB-S, etc. Mainly since I'm very interested if anybody has tested this with DVB-C :) Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [PATCH] S2API for vdr-1.7.1 vanilla and extensions patch 64 ( 071020008 )
-Original message- From: Klaus Schmidinger [EMAIL PROTECTED] Sent: Tue 07-10-2008 13:44 To: vdr@linuxtv.org; Subject: Re: [vdr] [PATCH] S2API for vdr-1.7.1 vanilla and extensions patch 64 ( 071020008 ) On 10/07/08 12:46, gimli wrote: Hi All, this patches are for Steve Toth's repository at : http://linuxtv.org/hg/~stoth/s2/ . In theory they should work. I did them offline from my VDR. Just so nobody wonders why I'm not currently adopting this switch to S2API: I've tested a recent version of the S2API driver and it apparently doesn't support the TT-Budget S2-3200 cards yet (which IIRC the multiproto driver does). I understand this completely. Even besides the fact that the card (still?) has locking problems with multiproto, I hope that the current drivers in multiproto and/or mantis will be be ported to S2API soon. I have high hopes that this will be the case in a short time. It's been two weeks after the S2API announcement and they announced that in 4 weeks after the announcement the TT-3200 should be included in S2API. So have hope! :) So as long as these cards are not supported, VDR will not go anywhere near S2API (and I certainly will not support two DVB APIs in parallel). The reason why I started (read: continued Igor's patch ;) with the S2API patch, is because S2API has been voted to be the next enhancement in the v4l drivers and I wanted to test S2API. Since I have a WinTV-NOVA-HD-S2, I didn't had much difficulty to test S2API in combination with VDR (since it's supported since the beginning, ghe). The plus of this all is, is that people can use VDR *now* with their S2API supported DVB-cards for DVB-T, DVB-S, DVB-S2 and possibly DVB-C. But other can use VDR as well, as soon when it becomes a part of v4l and/or part of the next kernel release :) Currently only Kaffeine (untested, but it should be working) and VDR 1.7.x have support for S2API. So VDR is atleast ahead of MythTV on this point (I haven't seen any S2API patches floating around for MythTV). And I'll be making patches for S2API-support, as long as long as you can't test/support it :) Klaus Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [PATCH] S2API for vdr-1.7.1 vanilla and extensions patch 64 ( 071020008 )
-Original message- From: gimli [EMAIL PROTECTED] Sent: Tue 07-10-2008 12:46 To: VDR Mailing List vdr@linuxtv.org; CC: VDR Mailing List vdr@linuxtv.org; Subject: [vdr] [PATCH] S2API for vdr-1.7.1 vanilla and extensions patch 64 ( 071020008 ) Hi All, this patches are for Steve Toth's repository at : http://linuxtv.org/hg/~stoth/s2/ . In theory they should work. I did them offline from my VDR. Nice :) I saw the announcment/message from Steve on the linux-dvb mailinglist. Since this morning, many enhancements were added to the frontend.h for DVB-T. Also, QPSK/8PSK modulation with DVB-S2 should be fixed (no need for the NBC_QPSK hack). Since I'm at work, I'm not able to do anything (I can program but I cannot test). As soon as I'm home, I'll make the patch for 1.7.0 and make sure that everything works correctly with DVB-T, DVB-S and DVB-S2. cu Edgar (gimli) Hucek Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] [PATCH] S2API for vdr-1.7.0 (07-10-2008 - quickhack for DVB-S(2), DVB-T and DVB-C)
Hello All, This patch gives VDR 1.7.0 support for DVB-C (untested), DVB-S (tested), DVB-S2 (tested) and DVB-T (tested) using S2API. The patch itself is still based upon Igor M. Liplianin's S2API patch. Today Steven Toth made some changes to the HG repo of S2API, so it was time for a new patch :) Here's what's new: - Added the new DTV commands for use with DVB-T; - Added DTV_ROLLOFF en ROLLOFF_35 frontend command/data for DVB-S (required to get a lock with DVB-S); - Removed NBC_QPSK modulation-hack since it was not needed anymore; - Removed QAM_AUTO modulation-hack for DVB-C and DVB-T (DVB-T doesn't require it anymore with the new DTV commands); Enclosed are two patches. The clean patch is for a clean VDR 1.7.0 source tree patched with Reinhard's vdr-1.7.0-h264-syncearly-framespersec-audioindexer-fielddetection-speedup.diff.bz2 patch. The diff patch is for those who have used the patch from 05-10-2008. Please only use this patch if you have updated to the latest S2API from http://linuxtv.org/hg/~stoth/s2! Thanks goes out to Igor, Darron Broad and Edgar (gimli) Hucek for the help and suggestions with the previous and current patches. Again, any feedback on this patch is highly appreciated! Regards, Niels Wagenaar vdr-1.7.0-s2api-07102008-05102008-diff.patch.gz Description: Binary data vdr-1.7.0-s2api-07102008-h264-clean.patch.gz Description: Binary data ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [PATCH] S2API for vdr-1.7.0 (05-10-2008 - quickhack for DVB-S(2), DVB-T and DVB-C)
Hello All, Here's a new patch for DVB-S, DVB-S2, DVB-T and DVB-C support using S2API in combination with VDR 1.7.0. By accident I used an old source tree for the patch from 04-10-2008, which resulted in problems getting a stable lock on DVB-T and/or perhaps DVB-C. The included patch will fix that. Enclosed are two patches. The clean patch is for a clean VDR 1.7.0 source tree patched with Reinhard's vdr-1.7.0-h264-syncearly-framespersec-audioindexer-fielddetection-speedup.diff.bz2 patch. The patched patch is for those who have used the patch from 04-10-2008. Again, any feedback on this patch is highly appreciated! Regards, Niels Wagenaar vdr-1.7.0-s2api-05102008-clean.patch.gz Description: Binary data vdr-1.7.0-s2api-04102008-05102008-patched.patch.gz Description: Binary data ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [PATCH] S2API for vdr-1.7.0 (05-10-2008 - quickhack for DVB-S(2), DVB-T and DVB-C)
-Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Klaus Schmidinger Verzonden: zondag 5 oktober 2008 12:35 Aan: vdr@linuxtv.org Onderwerp: Re: [vdr] [PATCH] S2API for vdr-1.7.0 (05-10-2008 - quickhack for DVB-S(2), DVB-T and DVB-C) -- SNIP -- I'm about to begin setting up my new VDR with DVB-S2 support, so I was wondering Just to get one thing straight. Currently only a couple of DVB-S2 cards are supported. Be sure to check the Wiki of S2API: http://www.linuxtv.org/wiki/index.php/S2API I read somewhere you used a S2-3200. That is possibly not yet supported. At least, not yet ;) - where is the ultimate S2API driver source? Development repo: http://linuxtv.org/hg/~stoth/s2 - can you provide an S2API patch against plain vanilla VDR 1.7.1 (without any other patches)? It should only make the necessary changes to switch from the multiproto API to the S2API. It's attached :) Klaus Regards, Niels Wagenaar vdr-1.7.1-s2api-05102008-vanilla.patch.gz Description: Binary data ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [PATCH] S2API for vdr-1.7.0 (05-10-2008 - quickhack for DVB-S(2), DVB-T and DVB-C)
-Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Klaus Schmidinger Verzonden: zondag 5 oktober 2008 17:53 Aan: vdr@linuxtv.org Onderwerp: Re: [vdr] [PATCH] S2API for vdr-1.7.0 (05-10-2008 - quickhack for DVB-S(2), DVB-T and DVB-C) -- SNIP -- Apparently stb6100.ko and stb0899.ko are not contained in that driver, which means it's useless for me. That's correct. Any idea when these will become part of the S2API driver? IIRC these did work (at least to some extent) in the multiproto driver... According to the announcement, it should be available within 4 weeks after the announcement: The group aims to have a unified in-kernel DVB-S2 HVR4000 / TT-3200 tree (that also supports all of the derivative CX24116 / STB0899 known products) within 4 weeks from the announcement, hopefully in time for kernel 2.6.28. For that, we would like to ask Manu to port his drivers to the new API. Klaus Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] [PATCH] S2API for vdr-1.7.0 (04-10-2008 - quickhack for DVB-S(2), DVB-T and DVB-C)
Hello All, Today I finished the patch for DVB-S, DVB-S2, DVB-T and DVB-C support using S2API in combination with VDR 1.7.0. I've tested my code on DVB-S, DVB-S2 and DVB-T transports and they were all successful. DVB-C is untested (don't have a DVB-C option where I live) but it should work in *THEORY* ;) DVB-S and DVB-S2 were tested on a Hauppauge WinTV-NOVA-HD-S2 card. DVB-T was tested on a Gigabyte GT-U7000-RH USB device. I used the latest v4l pull and viewing was very stable with both DVB devices. I also didn't had any problems any more when switching between DVB-S(2) and DVB-T, but it can be that this patch will *NOT* work correctly on MFE DVB devices like the HVR-3000 or HVR-4000 (I had to do some hacking because strangely, DVB-T transports were offered to my DVB-S DVB device). Since I can't test this, I hope others can tell me if it works or not. Enclosed are two patches. The clean patch is for a clean VDR 1.7.0 source tree patched with Reinhard's vdr-1.7.0-h264-syncearly-framespersec-audioindexer-fielddetection-speedup.diff.bz2 patch. The patched patch is for those who have used Edgar (gimli) Hucek's patch for VDR 1.7.0. In theory it should also work with my last send patch. The patch itself is still based upon Igor M. Liplianin's S2API patch. Many thanks to Igor, Darron Broad and Edgar (gimli) Hucek for the help and suggestions with the previous and current patch. Again, any feedback on this patch is highly appreciated! Regards, Niels Wagenaar vdr-1.7.0-s2api-04102008-clean.patch.gz Description: Binary data vdr-1.7.0-s2api-04102008-patched.patch.gz Description: Binary data ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Help building xine-lib-1.2 --with-external-ffmpeg?
-Original message- From: Stefan Ellenberger [EMAIL PROTECTED] Sent: Thu 02-10-2008 01:53 To: vdr@linuxtv.org; Subject: [vdr] Help building xine-lib-1.2 --with-external-ffmpeg? Thanks Niels, indeed this helped me as well. Your welcome! Now I'm getting a HUGE amount of undefined reference to av_log It starts browsing the ffmpeg source tree (where I built ffmpeg) for libav c files here's the one that makes it quit: -- SNIP -- You happen to know a way around this as well? Since you are using XUbuntu like I do you might have experienced the same problem. Nope. Besides that thing with the -ldts_pic and a additional patch, I didn't need to anything else. I don't hope it is getting any worse than that... It shouldn't :) 1. how many fixes in the code have been necessary until you (Niels) could run a save compile? Only two in my case. But on those fixes is a patch so that xine-lib 1.2 SVN can build with the latest ffmpeg SVN releases. 2. Could anyone point out what kind of developer libraries you installed in order to compile xine-lib savely? This is what I use: - FFMPEG SVN: cd /usr/local/src apt-get install build-essential apt-get install mercurial cvs subversion libncurses-dev apt-get install autoconf libtool automake pkg-config gettext apt-get install liba52-0.7.4-dev liblame-dev libvorbis-dev zlib1g-dev libpng12-dev libx11-dev libxv-dev libasound2-dev apt-get build-dep ffmpeg svn checkout svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg cd ffmpeg/ ./configure --prefix=/usr --enable-shared --enable-gpl --enable-postproc --enable-liba52 --enable-libmp3lame --enable-libvorbis --enable-pthreads --enable-swscale make make install ldconfig –v - Xine-lib 1.2 HG: cd /usr/local/src apt-get install libcdio-dev libvcdinfo-dev hg clone http://hg.debian.org/hg/xine-lib/xine-lib-1.2 wget http://www8.mplayerhq.hu/MPlayer/releases/codecs/essential-20071007.tar.bz2 tar xivf essential-20071007.tar.bz2 mv essential-20071007 /usr/local/lib/win32 ln -s /usr/local/lib/win32 /usr/local/lib/codecs wget http://shalafi.xs4all.nl/vdr/xine-lib-1_2-ffmpeg.patch cd xine-lib-1.2 patch –p1 ../xine-lib-1_2-ffmpeg.patch ./autogen.sh --prefix=/usr --with-external-ffmpeg --disable-dxr3 --enable-w32dll --with-w32-path=/usr/local/lib/win32 make make install ldconfig -v - Xine-UI: cd /usr/local/src apt-get install libxt-dev wget http://home.vrweb.de/~rnissl/xine-ui-cvs-2008031020.tar.bz2 tar xivf xine-ui-cvs-2008031020.tar.bz2 cd xine-ui ./autogen.sh --prefix=/usr --enable-vdr-keys make make install I think that the above information should get you the stuff installed. Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [PATCH] S2API for vdr-1.7.0 (quick hack for DVB-S/DVB-S2)
Op Do, 2 oktober, 2008 16:35, schreef Gregoire Favre: -- SNIP -- I can watch DVB-S channels, including H.264 ones. For some unknown reason I can't seems to be able to watch Arte HD for example when I start VDR with all my cards. If I start VDR with -D1 (my only DVB-S2 card) it works well, I guess it miss a check like in the previous patch ;-) I think why this is the case. The original patch by Igor (and then by me) disabled some items. More importantly, the code to switch to other cards/frontends. Since I'm going to work on DVB-T and DVB-C, I hope to implent this as well. I can test this a bit since I use DVB-S/DVB-S2 and DVB-T on my VDR configuration. Great work :-) Yeah, Gimli made some nice patches! Since I had to work, I couldn't do this myself. Next patch from will will be for unpatched and patched VDR 1.7.0 with h264 patch. So, future patches will not have the speedup patches implented. Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] High cpu usage with vdr-xine
Op Wo, 1 oktober, 2008 13:59, schreef serge pecher: Hello, -- SNIP -- I am using Ubuntu 8.04 + a S2-3200 on a P4 3 Ghz, 1GB ram When I play SD channels I have a cpu usage of +/- 20-30% When I try Simul HD I can see the CPU usage slowly going up to +/- 95 %, after what xine crashes Are you using the SVN version from Xine? Or the stable 1.1.x releases? You might want to try the 1.1.x releases instead. SVN is bleeding edge and can sometimes result in ackward unstability. Anyway. Perhaps an optimized build of ffmpeg and xine-lib. Also, I can't really tell if a P4 3.0Ghz is fast enough. A DualCore is adviced for viewing HDTV. In both cases. You might want to experiment with the CoreAVC dshowserver plugin for Xine (link was posted a few days ago). While you have a single-core CPU, CoreAVC is much more faster then FFMpeg. In my case, my Core2Duo didn't go above the 100% resulting in dropouts of frames and audio in combination with FFMpeg. Now I'm testing with the CoreAVC dshowserver plugin for Xine, and I can now see my cores being used and the image (and Xine!) producte stable results. BTW, CoreAVC is an Windows plugin. But you can use it in combination with the dshowserver patch/enhancement. CoreAVC is not free though, it costs around 10,- ($15,-) but in imho, worth the money. Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [PATCH] S2API for vdr-1.7.0(1.7.1) quick hack
Op Zo, 28 september, 2008 23:29, schreef gimli: Hi, I'm on Astra 19.2 and tested the following HD transponders : Anixe HD Arte HD Astra HD+ first test results : Arte HD tunes ok and plays fine. Same here. Arte HD is a DVB-S2 transponder using the 8PSK modulation. Locking goes without any problems at all. On Astra HD+ and Anixe HD im getting an error : Astra HD+ en Anixe HD is on a DVB-S2 transponder which is using a QPSK modulation. -- SNIP -- If you need further informations let me know. I tested other DVB-S2 transponders which have a QPSK modulation. All these didn't want to lock and gave a timeout. DVB-S2 Transponders with a 8PSK modulation did gave a lock (Hotbird has a couple, while I don't have subscriptions to chose channels, I'm able to lock those). So my first impression was, it's a missing parameter in the Frontend struct. So I made some changes and check if the transponder is DVB-S2 and added parameters for DTV_PILOT (with data PILOT_AUTO) and when QPSK is used with DVB-S2, to use the NBC_QPSK modulation (which is needed for DVB-S2 if I'm not mistaken) instead of regular QPSK. However, didn't bring me the sollution I hoped for. I now have a timeout, lost lock and regain lock, etc, etc, etc. But it's more then it was before. So I'm close. Currently I do have a small problem where I put in parameters which shouldn't been given (oops!) and now my DVB-card doesn't lock any more, I need to reboot first. I hope to start to work on it this further when I'm done with work. I'll keep you all posted :) BTW, I did manage to get DVB-T working. At least it locks on on the encrypted channels, but I didn't had time to check for image. Mainly since DVB-T is my backup for channel-viewing and I wanted to focus on the DVB-S2 problem. cu Edgar (gimli) Hucek Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Help building xine-lib-1.2 --with-external-ffmpeg
Op Di, 30 september, 2008 23:50, schreef crow: On Tue, Sep 30, 2008 at 9:52 PM, Stefan Ellenberger [EMAIL PROTECTED] wrote: Hi list Can anyone help me around this xine-lib compile problem caused by a missing math library? -- SNIP -- make[2]: Verlasse Verzeichnis '/usr/src/xine-lib-1.2/src/audio_dec' make[1]: *** [all-recursive] Fehler 1 make[1]: Verlasse Verzeichnis '/usr/src/xine-lib-1.2/src' make: *** [all-recursive] Fehler 1 -- SNIP -- Hi, Well i didnt sow this problem before. You can use latest ffmpeg and also xine-lib1.2 if you patch xine-lib1.2 with this patch: http://vdr-wiki.de/wiki/index.php/Sidux_VDR_DVB-S2#xine-lib Did you install *-dev library for ffmpeg and xine-lib1.2? On that page you can see which are needed on sidux (Debian sid). I did. Just edit /usr/src/xine-lib-1.2/src/audio_dec/Makefile. Look for -ldts_pic and add -lm after it. And now do a make again, it should now compile without problems. Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [PATCH] S2API for vdr-1.7.0(1.7.1) quick hack
-Oorspronkelijk bericht- Van: Igor M. Liplianin [mailto:[EMAIL PROTECTED] Verzonden: zondag 28 september 2008 12:49 Aan: vdr@linuxtv.org; Niels Wagenaar CC: Gregoire Favre; [EMAIL PROTECTED] Onderwerp: [vdr][PATCH] S2API for vdr-1.7.0(1.7.1) quick hack -- SNIP -- Hi Niels S2API for vdr-1.7.0(1.7.1) quick hack Patch is ugly and only supported DVB-S. But it is useful to begin. You may modify it like you wish. Igor, thanks for the hack/patch! Now I have something to compare and this will speed it up for me very much :) I didn't had time to start with it yet (Family ;). It was my plan to start this evening. So if I have something new, I'll report this asap :) Igor Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [PATCH] S2API for vdr-1.7.0(1.7.1) quick hack
Hi Igor, Small question. I tried your patch, but it fails a hunk in dvbdevice.c. I added this hunk manually but I think something is missing: Sep 28 13:56:15 htpc vdr: [19486] ERROR (dvbdevice.c,251): Operation not supported Sep 28 13:56:15 htpc vdr: [19486] ERROR (dvbdevice.c,252): Operation not supported Sep 28 13:56:15 htpc vdr: [19486] ERROR: frontend 0: Invalid argument Those both lines has the following code: CHECK(ioctl(fd_frontend, FE_SET_VOLTAGE, volt)); CHECK(ioctl(fd_frontend, FE_SET_TONE, tone)); The result is, no tuning and no picture. And to be honest, I don't really understand why it shouldn't work. Mainly, since the same code is used with the Kaffeine patch (I'm comparing that also). Any help is appreciated :) If you need a quick chat, I'm currently in #linuxtv on irc.freenode.net :) Regards, Niels Wagenaar -Oorspronkelijk bericht- Van: Igor M. Liplianin [mailto:[EMAIL PROTECTED] Verzonden: zondag 28 september 2008 12:49 Aan: vdr@linuxtv.org; Niels Wagenaar CC: Gregoire Favre; [EMAIL PROTECTED] Onderwerp: [vdr][PATCH] S2API for vdr-1.7.0(1.7.1) quick hack ? ? ?? 24 September 2008 18:34:01 Niels Wagenaar ???(?): Hello all (and especially Klaus): It's official, the people from V4L have voted for the usage of the S2API proposal to be the future for new DVB API improvements (see the official announcement at the bottom) within the V4L tree. Currently S2API is in a real speed-train and new devices are added very rapidly. Only the devices currently in Multiproto and written by Manu Abraham are not yet ported. Also people are allready busy with patches for Kaffeine (allready done) and MythTV (not seen yet, but it's WIP according to a post on the linux-dvb mailinglist). So, this should mean that VDR 1.7.x should focus on S2API because of the obvious reasons. Has anybody started on a patch of somekind to include S2API in VDR 1.7.0 or 1.7.1? Mainly I was thinking of doing it myself (I have a Hauppauge WinTV-NOVA-HD-S2 which is allready supported in S2API) in the hope to have it working in the next weekend. But if it's allready done or in progress, then I would like to use my time for something else ;) Regards, Niels Wagenaar Hi Niels S2API for vdr-1.7.0(1.7.1) quick hack Patch is ugly and only supported DVB-S. But it is useful to begin. You may modify it like you wish. Igor ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [v4l-dvb-maintainer] [Wanted] dvb-ttpci maintainer
about multiproto. But some decision must be made so that the train can get forward and my understanding is that both the S2API and multiproto API can be used for that. So in that sense I am happy that the work for getting drivers back from tens of different development trees back to v4l-trunk has started. The different development trees for multiproto are scattered around the net. Even Klaus complained that multiproto(_plus) wouldn't even compile for him. I even don't use the official multiproto repository, I use the liplianindvb because I don't have to pull multiproto, patch it with a attachment from the linux-dvb list or a website and cross my fingers that it doesn't break (which happened quite a lot in the past). The real win-win solution at least for the co-operation point of view would be if S2API and Multiproto could somehow be compined for making one superiour DTV API. To be honest, I hope they abandon multiproto and focus entirely on S2API and start cleanly with the drivers. So personally I don't want to see the merge of multiproto with S2API. And I think that my reasons for why, are clear enough. But as there has not been any emails discussing the details of these two API's I do not know whether it makes sense from technology point of view. (As the technically best API should always win in Linux...) From an end-user point of view, I don't care which technology is the best. I don't want repositories after which you have to patch to fix several problems because after months of the availability it's still not implanted. So, I want a stable and working API which allows me to watch DVB-S2 channels and I want software which supports it. Multiproto had his chance for two years now. (Perhaps) the best course is to start over and see what S2API brings us in one month. I reckon that most of the linux-dvb people will see that despite the process, this is the logical step for v4l and new DVB techniques under Linux. I hope people could still have some energy for commenting this? I kept rather quiet for a reason. It's better to read everything after a period of time, reflect and then give your opinion. And my opinion is as a normal user, which has knowledge about Linux, compiling, patching, etc. That S2API is the way to go so we can start fresh and clean. Because several people told me that the lack of support and progress for new DVB techniques is keeping them away from Windows alternatives. And to be honest, I can't blame them. Mika Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] FW: [ANNOUNCE] DVB API improvements
Hello all (and especially Klaus): It's official, the people from V4L have voted for the usage of the S2API proposal to be the future for new DVB API improvements (see the official announcement at the bottom) within the V4L tree. Currently S2API is in a real speed-train and new devices are added very rapidly. Only the devices currently in Multiproto and written by Manu Abraham are not yet ported. Also people are allready busy with patches for Kaffeine (allready done) and MythTV (not seen yet, but it's WIP according to a post on the linux-dvb mailinglist). So, this should mean that VDR 1.7.x should focus on S2API because of the obvious reasons. Has anybody started on a patch of somekind to include S2API in VDR 1.7.0 or 1.7.1? Mainly I was thinking of doing it myself (I have a Hauppauge WinTV-NOVA-HD-S2 which is allready supported in S2API) in the hope to have it working in the next weekend. But if it's allready done or in progress, then I would like to use my time for something else ;) Regards, Niels Wagenaar -Original message- From: Mauro Carvalho Chehab [EMAIL PROTECTED] Sent: Tue 23-09-2008 23:19 To: DVB ML [EMAIL PROTECTED]; Subject: [linux-dvb] [ANNOUNCE] DVB API improvements After years of discussions, several patch series and two different proposed approaches, LinuxTV developers finally decided that S2API is the better technical proposal and should be accepted as the way to allow supporting newer DTV standards, starting with DVB-S2. As previously announced at http://linuxtv.org/news.php?entry=2008-09-19.mchehab, a representative group of active developers at LinuxTV community attended the first V4L/DVB Summit, that started with the V4L/DVB miniconf at Linux Plumbers/2008. Several other additional formal (BOF's) and informal meetings happened there, in the benefit of the improvement of the development of multimedia drivers and core. During the miniconf, both Multiproto API (proposed by Manu) and S2API (proposed by Steven), were presented. A technical discussion was made during the DVB BOF session in order to compare the two proposals and check for the need/convenience of other core internal changes to draw an evolution timeline for DVB. The DVB BOF had the presence of the following LinuxTV members: Douglas Schilling Landgraf Hans Verkuil Mauro Carvalho Chehab Michael Krufky Patrick Boettcher Steven Toth Thierry Merle Manjunath Hadlii We had also a presence of an end-user listening to the BOF (Brandon Fouts). During the BOF, the LinuxTV members carefully analyzed the pros and cons for both proposals. At the end, all people present there agreed that S2API is technically more reliable in time than Multiproto proposal. So it was decided that S2API will be merged upstream. The main arguments in favor of S2API over Multiproto are: - Future proof – the proposal for S2API is more flexible, easily allowing the addition of newer features and new standard support; - Simplicity – S2API patches are very simple, while Multiproto presented a very complex series of changes. Simpler approaches reduces the time for maintaining the source code; - Capability of allowing improvements even on the existing standards, like allowing diversity control that starts to appear on newer DVB devices. Some improvements were proposed by the LinuxTV developers, in order to improve the S2API, including: - Adding an API command for querying DVB version, to allow an easier detection by userspace applications; - Name the DVB API with S2API as DVB version 5; - Update DVB API documentation to reflect the API changes; - Remove from DVB API the unused API ioctls, to match the API with the existing implementations. The author of S2API got the task of adding those suggestions at the proposed standard and send a pull request to the subsystem maintainer, together with patches for his drivers that use the newer API. It was also discussed that some of the internal Multiproto API changes may be needed in other to support some of the other existing DVB-S2 drivers that were developed considering Multiproto API. Internal changes can be added at any time without producing problems in the user API. The group aims to have a unified in-kernel DVB-S2 HVR4000 / TT-3200 tree (that also supports all of the derivative CX24116 / STB0899 known products) within 4 weeks from the announcement, hopefully in time for kernel 2.6.28. For that, we would like to ask Manu to port his drivers to the new API. The end goal is to add proper support for all devices that would have been supported by multiproto and S2API alike available. There are already volunteers working or that have offered to work on Kaffeine and MythTV S2API support. We still need volunteers to work on dvb-apps support. If you
Re: [vdr] Still can't do multiproto - can now :)
-Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Josce Verzonden: zaterdag 20 september 2008 11:29 Aan: vdr@linuxtv.org Onderwerp: Re: [vdr] Still can't do multiproto - can now :) Edit Make.config and change/edit the DVBDIR variable. I guess you don't have it pointed to you multiprot location. Of course I haven't :) In my twisted and tired brain I assumed that make install would install the modules and the header files that go with them. Thanks again for your help! Your welcome :) I'm glad that this issue was so simple to be resolved ;) Now running: - multiproto - vdr 1.7.0 - vdr-1.7.0-h264-syncearly-framespersec-audioindexer-fielddetection- speedup.diff It works almost well. The sound is good but the video has some mosaic, both on live and verified good recordings? The cpu usage is 10% Did you try updating/compiling the hg/svn of xine-lib as well as ffmpeg ? Also, I don't know which software output device you use, but you can setup postprocessing with for instance xineliboutput or vdr-xine. Josce Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Still can't do multiproto - can now :)
-Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Josce Verzonden: zaterdag 20 september 2008 13:10 Aan: VDR Mailing List Onderwerp: Re: [vdr] Still can't do multiproto - can now :) Sorry, forgot the relevant part :( Using the reelbox-plugin. Could you define mosaic? Would you be able to post a picture of some kind? To be honost, I haven't updated the hdplayer3 stuff for some while now. So it could be related to a new update in the svn in the reelbox plugin/hdplayer3. Josce Yours, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] reelbox plugin - help compiling
-Original message- From: Josce [EMAIL PROTECTED] Sent: Fri 19-09-2008 13:36 To: [EMAIL PROTECTED]; Subject: RE: [vdr] reelbox plugin - help compiling Did you try: hg pull http://arvdr-dev.free-x.de:8080/testdvb/ hg pull http://jusst.de/hg/multiproto/ hg pull http://jusst.de/hg/multiproto_plus/ Tried http://jusst.de/hg/multiproto_plus/ and managed to get it without problems. Compiling it as I type this and so far no problems :) Be sure to do this also: cd multiproto_folder cd linux/include/linux ln -s /usr/src/linux-headers-`uname -r`/include/linux/compiler.h ./ Change multiproto_folder to your folder wich contains multiproto (ie: multiproto_plus). You need this before you can compile VDR 1.7.0. And concerning the eHD/reelbox plugin. Best thing is, to setup the plugin through VDR (Menu - Setup - Plugins - Reelbox). I do this to, and I never had any problems what so ever. Regards, Niels Wagenaar Is there any sort of documentation about reelbox-plugin? I have all these reelbox.xxx settings in my setup.conf and haven't got a clue what they are. Josce Explore the seven wonders of the world Learn more! ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Still can't do multiproto :(
Op Vr, 19 september, 2008 21:21, schreef Josce: -- SNIP -- I can't understand why compiler.h is not found, since I have no problems finding it :) Getting tired and frustrated, better give this some rest ... Edit Make.config and change/edit the DVBDIR variable. I guess you don't have it pointed to you multiprot location. In your case you should have it set at: DVBDIR = /usr/local/src/multiproto_plus/linux (change /usr/local/src to your location) Josce Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Getting old dvb_ttpci running with new driver and VDR1.7.1
Op Wo, 17 september, 2008 08:04, schreef Matthias Fechner: Hi Community, -- SNIP -- Was anyone successfull to get that driver with VDR 1.7.1 with the old TT card (Rev 1.3) running? Not with an old TT card and VDR 1.7.1, but I had the same kind of problem with a Skystar2 (SS2) Rev 2.6 in combination with VDR 1.7.0 a couple of days back. I used Igor's repo as well and I only compiled VDR against the liplianindvb with the compiler.h in place (no compiling of liplianindvb at all, I thought it wasn't needed since the card was allready detected). And I encountered the same problem, no locking with VDR 1.7.0 and a SS2. In the user.log I found an error message with the text No DVB devices found (or something like this). I resolved it by compiling liplianindvb and do a make install (I rebooted to be sure). And voila! The SS2 worked without problems and could lock to several transponders on different sats. So in short, compilation and installation of multiproto is mandatory for VDR 1.7.0. Perhaps this will also fix your problem with VDR 1.7.1. Bye, Matthias Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [ANNOUNCE] VDR developer version 1.7.1
Op Zo, 14 september, 2008 16:45, schreef Gregoire Favre: On Sun, Sep 14, 2008 at 04:35:10PM +0200, Klaus Schmidinger wrote: For some odd reason neither the latest version of multiproto nor multiproto_plus works here for me. The only one that does work is multiproto_plus 88821ce4ed8d. See my posting on the linux-dvb ML. What about http://liplianindvb.sourceforge.net/cgi-bin/hgwebdir.cgi/liplianindvb/ ? -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre I use Igor's repo with VDR 1.7.0 (haven't upgraded to 1.7.1 yet) and it works without any problems at all in combination with my Hauppauge NOVA-HD-S2 Yours, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Help building xine-lib-1.2 --with-external-ffmpeg
Op Vr, 12 september, 2008 16:42, schreef Todd Luliak: I've been running around in circles trying to get xine-lib-1.2 built with external ffmpeg. I currently use 1.2 with CoreAVC and would like to explore the h.264 improvements in ffmpeg trunk. I am suspecting my ffmpeg configuration/build/installation, but don't know what's wrong. -- SNIP -- ff_audio_decoder.c: In function 'ff_audio_decode_data': ff_audio_decoder.c:272: error: 'AVCodecContext' has no member named 'bits_per_sample' ff_audio_decoder.c:325: error: implicit declaration of function 'avcodec_decode_audio' ff_audio_decoder.c:330: error: 'AVCodecContext' has no member named 'bits_per_sample' -- SNIP -- Currently I'm starting with a new VDR system on Xubuntu 8.04. And I have the exact same issue. Latest trunk of ffmpeg and the latest SVN of xine-lib 1.2. xine-lib compiles fine without the external ffmpeg flag, and xine-lib-1.1.14 compiles with or without external ffmpeg using the same configure options. -- SNIP -- I tried it with older version of xine-lib with or without external-ffmpeg, it failes at the exact same item (SVN, 1.1.14 and 1.1.15 were tested and have the same problem). and the result is the same Your help is GREATLY appreciated as I have tried everything I know and everything I found in searches over the last three days. I'm stumped. Same here. I did come around how to fix the 'bits_per_sample' message (it had to do with a change in ffmpeg after a certain revision). However, I'm not able to resolve the implicit declaration of function 'avcodec_decode_audio' error. But to be honest, I was a bit fedup last night. So if anybody can help me (or us ;) with this, that would be great. I was thinking of send this message to the xine mailinglist, but perhaps some VDR users know how to fix this. -Todd Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Help building xine-lib-1.2 --with-external-ffmpeg
Op Vr, 12 september, 2008 21:27, schreef crow: On Fri, Sep 12, 2008 at 9:15 PM, crow [EMAIL PROTECTED] wrote: -- SNIP -- You can try this revision of ffmpeg r15261 as r15261 Major version http://git.mplayerhq.hu/?p=ffmpeg;a=commit;h=0472f3ecb8d65997f6de234110c5de06dc38a8f6 : svn checkout -r r15261 svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg_12.09.2008_test Again thanks _ds_ on #xine A small typo on your end: svn checkout -r 15261 svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg_12.09.2008_test And indeed, with this version compiling the latest svn of Xine-lib goes correctly :) Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] HVR4000
Op Ma, 1 september, 2008 18:48, schreef Pierre-Yves Paranthoën: Hi, Does anyone successfully run the Hauppauge HVR4000 with vdr ? I succesfully run the Hauppauge WinTV-NOVA-HD-S2. It uses the same driverset as the HVR-4000 and it is also known as the HVR-4000 Lite. Unlike the HVR-4000, it only has DVB-S and DVB-S2 reception and it lacks the Analog and DVB-T input (which I don't need anyway since I allready had a working USB DVB-T adapter in Linux/VDR). I run this on a VDR 1.7.0 with h264 patch in combination with the Reel eHD plugins/patches. regards Pierre Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] eHD, VDR and multimedia files
Greetings to All, Yesterday I've received my Reel eHD so that I can enjoy hardware accelerated DVB-S/DVB-S2 playback/output on my VDR-1.7.0 installation in combination with the S2-3200. Everything works, image is very good and I can enjoy HDTV without framedrops or stuttering :) The tutorials on vdr-wiki.de were very helpfull to get it all working. So cheers for the person who wrote it! But I miss something in my setup. I used Xineliboutput before - for output in combination with my DVB Budget card - as a player for DVD's and other multimedia files (Xvid, MKV, MP3, etc). Obviously, this doesn't work anymore (I tried it, I don't get any output on the eHD) According to vdr-portal.de, xinemultimedia seems to be the plugin so that I can enjoy multimedia using eHD as a output device. Besides the problems with getting xinemultimedia te compile, I wonder if there isn't an other option to have multimedia aspects in VDR using the eHD as an output device? If there isn't, what do I need to compile/patch to get xinemultimedia working? I think it's the following what I need: - xinemultmedia plugin (figures); - Xine-lib 1.1.8 with xine-reel.diff; - xine-ehd plugin (so that Xine can use the eHD as a output device); - Filebrowser (Otherwise selecting files will be a problem, right?); Is this correct? Because information about the eHD and multimedia aspects of VDR are a bit hard to find. And I don't know I like to fact to downgrade Xine-lib to 1.1.8 (I run Xine-lib 1.2.x now since it's part of Ubuntu 8.04). Regards, Niels Wagenaar Netherlands ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] eHD, VDR and multimedia files
Op Wo, 23 juli, 2008 15:55, schreef Torgeir Veimo: Two questions: - does the card support changing output framerate between 50 and 60Hz without restarting VDR? Currently, I've setup the output to [EMAIL PROTECTED] Before it was set on [EMAIL PROTECTED] With this change I didn't had to restart VDR and changes were made instantly. I can only watch some FTA HD channels like Arte HD, BBC HD, Axine HD, Luxe TV HD and the ones from my provider (Canal Digitaal NL) and I didn't encounter any problems with viewing. Concerning viewing, I'm not sure if they broacast in 50Hz or 60Hz. But again, I got not problems when viewing several HDTV channels. - how is changing between video / s-video output and HDMI achieved? Can they be enabled simultaneously, or change automatically based on whether something is connected on the HDMI port? I only watch using the HDMI port (my LCD-TV only has one HDMI input) on the eHD. Normal viewing (read : X-session) is done using the regular Analog output on my graphics card. So I can't really anwser your question correctly. -- Torgeir Veimo [EMAIL PROTECTED] Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] eHD, VDR and multimedia files
Op Wo, 23 juli, 2008 20:00, schreef Goga777: several questions :) I'll try to anwser them ;) - does eHD support 1080p ? Nope. Max is [EMAIL PROTECTED] And for normal viewing, 1080P is still a thing in the very long future (for your information, we just got HDTV since March) and it would be only be interesting for the HDDVD and BluRay movies. - which CPU do you have and what about cpu load during of decoding 1080i ? I have an AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ with AMD Cool'n'Quiet enabled. Currently it runs on 1Ghz (because of the AMD Cool'n'Quiet) and vdr has a CPU load of 15% through 25%. - is it hard to buy this card in Europe ? I ordered it online through Reel Germany. Ordered it Thursday, payed it the same day using IBAN information and UPS delivered it yesterday :) Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] HDTV softdevice
Op Wo, 16 juli, 2008 22:57, schreef Uwe Kiewel: Mostly with me it was the other way around. Image was good, audio was lost after a couple of seconds. I fixed this by using the latest trunks from the Xine and/or Xinelibout plugin as well as the Xine-lib and Xine-ui repositories. Did you get the audio problems only with HD content? In my case, sometimes the vdr log is flooding by xrun messages. At the same time, there is really bad sound - like a jumping audius cd :-) I only had audio problems when viewing HD content (BBC HD and the Canal Digitaal HDTV channels on which I have a subscription). With regular SD conent I didn't have any problems at all. However, I do have stuttering audio when using the software scale function with xineliboutput. This happens when I use the -l sxfe switch with a w/h of 1280x720 when starting VDR (vdr-sxfe starts up automaticly in the current X-session). In this situation, I need to do a software scale since the image is 1280x720 and I only see a non-scaled DVB-S image. With -l none and the same w/h (I startup vdr-sxfe 'manually' through my frondend) I don't have any problems at all. This is the thing I use most, mainly since I use mms as a HTPC frontend. I hope you can something with this information, thank you very much. There are a lot of informations for me. So I am going to work with xine. Your welcome :) Be sure to drop a line if you encounter problems, possibly I (or we) can help you to get it running ;) Uwe Niels ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] why I can't watch the H.264 channel with vdr-1.7.0+H.264?
Op Do, 17 juli, 2008 02:14, schreef LinHai: I have compiled the vdr-1.7.0+H.264+xine-lib-1.2+xineliboutput-1.0.1. But when I run it and select the H.264 channel. There is no image on the screen, But I can hear the audio. I can watch the mpeg-2 channes. MY VDR: debian lenny+multiproto+vdr-1.7.0+H.264+xine-lib-1.2+xineliboutput-1.0.1 MY vdr is running on xorg without KDE. why I can't watch the H.264 channel? Who Can tell me? thank you!. What card are you using for H264/HDTV viewing and what does VDR tell you when you select the channel? does it give an error? It looks like if xine-lib is using the internal ffmpeg viewer. Anyway, I used the following tutorials on my Ubuntu 8.04 config with S2-3200: http://www.vdr-wiki.de/wiki/index.php/OpenSUSE_VDR_DVB-S2_-_xine (German) http://skerit.kipdola.com/?p=8language=nl (Part 1, English) http://skerit.kipdola.com/?p=9language=nl (Part 2, English) Be sure to get the latest ffmpeg repository and compile it from source. The latest editions have had some great new h264 related optimalisations. Regards, Niels Wagenaar ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
