Re: [Elecraft] AX1 dipole
For a similar 10M version, look at N1LO's 10M Wire Collinear Super J-Pole which you can find at Nylo's Notepad Antenna Page. I have built and installed several of these vertical antennas over the years, hanging from tall tree limbs and stacked telescopic fiberglass poles. My EZNEC model shows omni gain of 4.34dbi at 9 degrees with top wire end at 52 ft. 73, Henry - K4TMC On Thu, Sep 29, 2022 at 3:31 PM Fred Jensen wrote: > The Franklin is two vertical, co-linear half-waves fed in-phase. Google > will offer way more than you want to read. Obviously a large structural > challenge for a full-size one at MF. The one I built as a test was > heavily loaded and worked about like EZNEC-4 predicted. I think it's > insensitivity to "ground" may be one reason it works well, but that's > just a guess. > > > 73, > > Fred ["Skip"] K6DGW > Sparks NV DM09dn > Washoe County > > Dan Presley wrote on 9/29/2022 12:20 PM: > > Fred-can you share details on this antenna? Not familiar with it. Thanks. > > > > Dan Presley 503-701-3871 > > danpresley@me. com > > n7...@arrl.net > > > > > >> On Sep 29, 2022, at 12:08, Fred Jensen wrote: > >> > >> I've long wondered why hams haven't done more with Franklin > verticals? KFBK [1530 kHz in Sacramento] uses one located in the southern > end of the Sacramento Valley, and it's known as a Flame Thrower. I think > KNBC [680 kHz?] in SF had one back in the 50's sometime too. They're big > at MF, but much more tractable at HF, and they are amenable to loading > techniques. I built one [fairly heavily loaded] out of Buddipole parts I > had, and its performance, particularly when I was still activating summits, > was surprising. Like a small loop, the Franklin pretty much ignores ground > ... although KFBK's probably likes being located in rice fields filled with > water. > >> > >> 73, > >> > >> Fred ["Skip"] K6DGW > >> Sparks NV DM09dn > >> Washoe County > >> > >> Jim Brown wrote on 9/29/2022 11:28 AM: > >>> David, > >>> > >>> I've published a LOT of work on concepts like this. > >>> > >>> This ran in National Contest Journal about six years ago. It's based > on extensive modeling, and was peer reviewed. > >>> > >>> http://k9yc.com/AntennaPlanning.pdf > >>> > >>> This was added to the ARRL Handbook or Antenna Book several years ago. > >>> > >>> http://k9yc.com/VerticalDipole.pdf > >>> > >>> This is an application of the above technique. > >>> > >>> http://k9yc.com/80M-FDVertical.pdf > >>> > >>> N6BT (original Force 12) has done a lot designs for monoband and > multiband verticals that are loaded dipoles. The multiband Cushcraft > R-series and Hi-Gain AV-series multiband verticals (companies bought out by > MFJ many years ago) are loaded dipoles. > >>> > >>> 73, Jim K9YC > >>> > >>>> On 9/29/2022 11:09 AM, David Gilbert wrote: > >>>> > >>>> You're talking about a horizontal pair of AX1's ... I asked about > them oriented vertically. That wouldn't require them to be as high above > ground as you mention and would still allow them to be carried pedestrian > mobile. > >> -- > >> This email has been checked for viruses by AVG antivirus software. > >> www.avg.com > >> __ > >> Elecraft mailing list > >> Home:http://mailman.qth.net/mailman/listinfo/elecraft > >> Help:http://mailman.qth.net/mmfaq.htm > >> Post:mailto:Elecraft@mailman.qth.net > >> > >> This list hosted by:http://www.qsl.net > >> Please help support this email list:http://www.qsl.net/donate.html > >> Message delivered ton7...@arrl.net > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] So today i learned about BNC-BP and red/black terminals
Well...this has been an interesting revelation. I just happened to have two of those adapters, one with a female BNC and the other with a male BNC, laying in my collection of adapters. The one with the male BNC had the red screw cap on the side with the tab and that side was electrically the shield portion of the BNC connector. The other adapter had the red cap on the side that was electrically the center conductor of the BNC connector. Although there were no manufacturing markings anywhere on the adapters, physically the molded portions appeared to be identical, indicating that potentially the same manufacturer made both parts. Electrically, the two parts were correct with only the screw cap colors reversed on one. So, maybe the final assembly person was color blind or 50% right was good enough for their quality control department. 73, Henry - K4TMC On Mon, Aug 29, 2022 at 10:56 PM Marshall Harrison wrote: > No, that is not a convention. They should follow the black is ground and > red is hot but sometimes quality control isn't what it should be. > > I always check to make sure since the colored tops can be easily swapped so > I don't trust them. The black/ground/shield side usually has a small tab or > something to identify it as being connected to the coax shield. > > *Marshall Harrison, * > *W4MKH* > > > > > > On Mon, Aug 29, 2022 at 10:32 PM Bill Lederer wrote: > > > Team: > > > > I have been using a wire out the window from my upstairs office for an > > antenna for my kx3. The wire goes to a tree about 30 feet away, so it is > > essentially a random wire. I have an additional wire that goes to a > ground > > rod one floor below. > > > > In doing some experiments with RBN and this combination with 5 watts, I > was > > confused about why connecting the wire to the tree to ground through the > > BNC-BP and the ground wire to the hot side of the BNC-BP gave better > > results. > > > > Finally, I measured which was which, and discovered that the black > plastic > > nut on this connector is actually connected to the center pin of the BNC, > > with the red being ground. This was certainly contrary to my > expectations. > > > > I also have a kx2 and got one of these connectors along with that kit. > And > > sure enough, it had the same convention--black is the center pin, red is > > ground. > > > > This is contrary enough to my intuition that I reversed the nuts, so now > > that the red indicates the center pin. > > > > Is this a convention that black is hot and red is ground with these? > > > > Thanks, > > w8lvn > > > > -- > > --w8lvn-- > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to marsh...@gotspeech.net > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Battery Low
Keith, That was the problem. Somehow, I had accidentally bumped the variable voltage control on the power supply down to 10 volts. During the contest, I kept wondering why the dial screen was dimmer and flickered during SSB transmit. I chalked that up to knowing I was using a marginal AC circuit at a portable site. Sadly, I did not resolve this until near the end of contest. 73, Henry - K4TMC On Mon, Mar 28, 2022 at 1:24 PM Keith Trinity WE6R wrote: > Yes, but the "BAT LOW" message has nothing to do with the clock battery. > > BAT LOW means your supply voltage is below the level you have set in > Config Menu "BAT MIN". > > From the manual; > BAT MIN 11.0 Low-battery warning threshold; 11.0 recommended. (This > refers to a battery used as the DC power supply for the transciever, not > to the 3-V backup battery for the real-time clock.) If the voltage drops > below this level, the operator will be alerted with a BAT LOW message. > The menu parameter flashes if this occurs within the menu, so the level > can be easily tested. > Keith WE6R Elecraft K3/K4 Tech > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Battery Low
Just set up at portable location for the CQ WPX Contest and am getting the 'Bat Low' warning. Is it safe to operate for a few days, or do I need to go find a battery before starting the contest? 73, Henry - K4TMC (K3 #98 with original battery) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] “ELECRAFT NVIS field day”
This note is relative to the "field day" portion of the subject line. The NVIS portion has been discussed previously. The Jan 2022 Winter Field Day rules are available at www.winterfieldday.com. Portable, outdoor and home stations are allowed. 73, Henry - K4TMC On Fri, Dec 17, 2021 at 9:14 AM Greg Herman wrote: > This is just a suggestion and forgive me if I’m not aware of something that > already exists. What if there was the annual event called the The Elecraft > NVIS field day? > > As we all know Elecraft plays well with others, and along that theme > everybody would be welcome to participate in such a field day event. I’m > guessing there would be a lot of KX twos and KX3 Yahoo Group all along with > several other QRP radios and some 100 watt ones. Who knows Wayne might put > a battery in a K4 and climb a hill. > > I have never made it in VIS contact but for emergency preparedness and just > knowledge I would love to learn a lot about it and having others to > participate would make it even easier to perhaps relay a message to across > America > > My understanding brief as it is is it 80 meters is one of the better bands > for NVIS > > Perhaps designate different segments of the band for the 0-9 groups > depending on where you’re from that way you could listen in for your > neighboring groups > > No stress, just good clean fun and an opportunity to learn. > > Comments and suggestions welcome > > Greg- KC9NRO > > > -- > Have a Great day! > Greg > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] “ELECRAFT NVIS field day”
Greg, You might want to consider doing this within the Winter Field Day event. There are 'indoor', 'outdoor' and 'home' categories. The next event is Jan 29-30, 2022. See www.winterfieldday.com for details. I had fun operating the event in Jan 2021 from a portable beach house site using a K3/100. Due to a logging mistake on my part, my score did not get reported. 73, Henry - K4TMC On Fri, Dec 17, 2021 at 9:14 AM Greg Herman wrote: > This is just a suggestion and forgive me if I’m not aware of something that > already exists. What if there was the annual event called the The Elecraft > NVIS field day? > > As we all know Elecraft plays well with others, and along that theme > everybody would be welcome to participate in such a field day event. I’m > guessing there would be a lot of KX twos and KX3 Yahoo Group all along with > several other QRP radios and some 100 watt ones. Who knows Wayne might put > a battery in a K4 and climb a hill. > > I have never made it in VIS contact but for emergency preparedness and just > knowledge I would love to learn a lot about it and having others to > participate would make it even easier to perhaps relay a message to across > America > > My understanding brief as it is is it 80 meters is one of the better bands > for NVIS > > Perhaps designate different segments of the band for the 0-9 groups > depending on where you’re from that way you could listen in for your > neighboring groups > > No stress, just good clean fun and an opportunity to learn. > > Comments and suggestions welcome > > Greg- KC9NRO > > > -- > Have a Great day! > Greg > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Power supply for KX3
Paul, The ProAudio Engineering Kx33 Power Supply is an excellent choice if you are planning to run just the KX3. 73, Henry - K4TMC On Fri, Oct 8, 2021 at 9:57 AM Paul Huff wrote: > My beautiful bride of 44 years is encouraging me to upgrade my shack to an > Elecraft KX3. (Seriously, she is the one who brought it up!) At the same > time I will be reducing the footprint of all of my accumulated gear > including my ancient, but still working, Astron RS-35A power supply. > Elecraft offers a little switcher made by Powerwerx for $119, and for > convince I might just go ahead and add that to my KX3 order, but I thought > that I would first ask if any of you have other (better? less expensive?) > suggestions for a switching power supply to run the KX3 on? BTW, I’m > strictly a QRP/CW op so there will be no future plans for an amplifier. > > Thanks ahead of time for any thoughts and suggestions. > > 73, > > Paul - N8XMS > 100% QRP CW > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft K4 now in Rob Sherwood's RX performance table
I Love my K3+(new syn)! 73, Henry - K4TMC (K3 #98) On Fri, May 28, 2021 at 1:22 PM BRUCE WW8II wrote: > I LOVE my K3s > > Bruce > WW8II > > On Fri, May 28, 2021 at 12:31 PM Wayne Burdick wrote: > > > Sherwood has posted his measurements of the K4D's receiver performance in > > his table: > > > >http://www.sherweng.com/table.html > > > > We're quite pleased with his test results, which confirm that the K4/K4D > > is near the top of its class (direct-sampling SDRs). A K4HD would provide > > somewhat higher dynamic range for those stations in extreme signal > > environments, but the vast majority of operators will find that the > K4/K4D > > more than meets their needs. > > > > I'd like to highlight a few important items in Rob's chart. > > > > First, the K4D has a high 2 and 20 kHz dynamic range value of 101 dB. > > Because it's a direct-sampling radio, this figure will hold at nearly all > > offsets from strong signals. Second is the block dynamic range number > (128 > > dB), higher than almost every other "pure" SDR measured. Finally, there's > > the LO noise (local oscillator; 148 to 155 dB) -- again, very favorable > > compared to all competing SDRs. This is an important number correlated > with > > reciprocal mixing dynamic range (RMDR). > > > > Taken together these demonstrate that the K4D will offer excellent > > performance in crowded band conditions. > > > > Inevitably a question will arise regarding the chart position of the K4D > > relative to a couple of our other transceivers: the K3S and KX3. There's > a > > bit of "apples to oranges" in both comparisons. > > > > The K3S uses a superhet receiver architecture. The K4HD will provide a > > receive setting that emulates this superhet performance when and if it's > > needed. But the "pure" (direct sampling) method used by the K4 (all > models) > > has many advantages. One is the elimination of artifacts associated with > > crystal filters. Another is that, as a pure SDR, the K4 has a far more > > flexible architecture. We'll be able to provide updates to the receive > and > > transmit digital signal chains that cannot be added to a superhet like > the > > K3S or its competitors. > > > > The KX3 is another Elecraft radio high on Sherwood's chart. Its > > performance is excellent, especially at its price point. But its numbers > > relative to the K4 are somewhat misleading, as hinted at by Rob's > > footnotes. The KX3 uses a quadrature downsampling architecture, which > > digitally samples at baseband audio rather than at RF. This is ideal for > a > > radio like the KX3 that has to have very low current drain for portable > > operations. The K4 uses a direct-samping architecture that requires a > > higher power digital signal chain, resulting in important benefits over > > quadrature downsampling including much higher and more consistent > opposite > > sideband image suppression and 2nd-order intermod rejection. So the two > are > > really designed for different applications. > > > > Overall, this first independent test of the K4 validates the performance > > of our SDR architecture. Feel free to send us any further performance > > questions. > > > > 73, > > Wayne > > N6KR > > > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to wa8...@gmail.com > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Two Reviews of K4 Now on eHam.net
See Subject Line...Happy Reading! 73, Henry - K4TMC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Secret K4 thread?
It's a secret!! On Wed, Feb 24, 2021 at 4:21 PM Grant Youngman wrote: > ?? > > > On Feb 24, 2021, at 4:12 PM, Robert Hand > wrote: > > > > > > > > Sent from my iPhone > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Can I rent a K4?
John, I like the idea! It would be great to rent a K4 for a few weeks to see if I want to replace my trusty K3+. Better yet, it would be nice to get a K4 and K4HD at the same time!! 73, Henry - K4TMC On Wed, Feb 3, 2021 at 12:22 PM John Harper wrote: > I wonder if this model would work? > > Flex offers a refund for those who try one of their rigs and don't like it. > But a rental would pose less risk to the manufacturer. > > There are (rumored) a small number of K4's in existence - the rest, of > course, are on hold. But regardless...even after full production has begun: > > What if, before plunking down 4 kilodollars, I could rent the rig for two > weeks? > > If I don't like it, I send it back to Elecraft and I'm only out the rental > fee and the cost to ship (renter pays shipping in both directions). > > If I do like it, I keep the rig and pay the balance. > > The rental fee would separate the serious potential buyers from those > simply wanting a two-week joyride. The question is, how much of a rental > fee would be acceptable for a company to offer such a business model? > > John AE5X > https://ae5x.blogspot.com > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Difference between a K3 and a K3S
Mike, You can look at the numbers on Sherwood Engineering's Receiver Test Data List, specifically the 5th, 6th and 7th items from the top, and the KX3 is just a few items lower. 73, Henry - K4TMC On Mon, Jan 25, 2021 at 10:29 AM NJMike wrote: > If a K3 has been upgraded to the latest synthesizer - the KSYN3A - what's > the > difference between it and the K3S? > > Thanks, > Mike NJ2OM > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KXPA100 Mount Screws
Joe, After several trips to a hardware store, I found that 10-32 screws fit my early unit (#425). I have two different pdf manuals that indicate 8-32 and 6-32 ?! YMMV. 73, Henry - K4TMC On Fri, Jan 22, 2021 at 12:06 PM Joseph Shuman via Elecraft < elecraft@mailman.qth.net> wrote: > There are 4 locations on the lower sides of the cover for mount screws. > Anyone know the size? Not spec’d in the manual. > > Keeping Watch- > shu > > Joe Shuman, NZ8P > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3/K3S Accessory Interest List
The list at that link does not include filters. So what does one do if they want a filter? 73, Henry - K4TMC On Wed, Aug 5, 2020 at 8:03 AM wrote: > > I have no interest in a KIO3B but I happened to click on the link in > Pete's post and saw that this is an interest list for a number of > K3/K3S options such as the DVR, sub receiver, antenna tuner, pan > adapter etc. The K3 line is a very popular line and the K3S was only > recently discontinued. I hope that this K line will be around for a > long time and unlike Windows 7, support will continue! A month or so > ago I purchased antenna tuners for my K3S's and I may have received > the last ones. I changed the email subject and I urge anyone who wants > K3/K3S accessories to click on the link below. > > John KK9A > > > N4ZR wrote: > > Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] > I just heard from Elecraft Sales that they are not going to fill my > mid-June order for the KIO3B update kit unless they get sufficient > interest to get "reasonable" prices from their suppliers. They don 't > define what that means, but if you have any interest at all in the K3 > KIO3B update kit, go to > > <https://elecraft.com/pages/k3-k3s-options-interest-form> > > and tell them so - otherwise they may never restock these excellent > updates for the K3. > > > 73, Pete N4ZR > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] solar- battery info request
Check the June 2020 issue of QST, page 30, Battery Sizing for Portable Operations. 73, Henry - K4TMC On Wed, May 27, 2020 at 5:24 PM Robert G Strickland via Elecraft < elecraft@mailman.qth.net> wrote: > I'd appreciate one/some references for getting into battery and solar > power for portable operation. Thanks in advance. > ...robert > -- > Robert G Strickland, PhD ABPH - KE2WY > rc...@verizon.net.usa > Syracuse, New York, USA > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Another prediction for Dayton 2020
I am expecting the SPx3. A powered (rechargeable internal battery) matching speaker for the KX3/KX2. 73, Henry - K4TMC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Windcamp X3 Li-ion Battery Box usage?
I keep seeing these on eBay. They look neat with packaging that matches, and attaches to, the KX3. Looks like a good way to have an external battery pack versus keeping batteries inside the KX3. Wonder if anyone has tried one of these? Windcamp says to only use the 18650 batteries with a flat anode. The only ones that seem to meet that specification are the 3400mah NCR18650B variety made for Panasonic. There are other 18650 batteries available with higher capacity (5000+mah), but they have the smaller rounded anode like normal AA batteries. Any thoughts on this? 73, Henry - K4TMC K3+/100, K2/100, KX3 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Compare: K3 to Collins S-line receiver
Don, Thanks for the comments. Good points! And just to keep the thread from getting off track...my point of reference relative to tube audio is post 1995 era electronic and speaker designs, not the "old tube-type radio" and their associated speakers. 73, Henry - K4TMC On Mon, Jun 4, 2018 at 9:57 AM, Don Wilhelm wrote: > Henry, > > I believe you will find the arguments similar to those among audiophiles > when recorded music was changing from vinyl to CDs. > My take on the subject is that the dynamic range of the digital techniques > exceeded the analog by a wide range you will not be able to discern the > microprocessor noise at normal or even very high listening levels. > > Take a look at the dynamic range and MDS of modern hybrid (like the > K3/K3S) receivers or good SDR receivers (like KX3 or KX2), in comparison to > some of the best analog receivers, and you should find that the dynamic > range is much greater (indicating its resistance to overload and distortion > is greater). That increased dynamic range gives rise to a better MDS - in > other words, it can hear weaker signals. > The mathematics in the DSP code is not going to cause distortion unless > the ADC is overloaded with a strong signal (good design says that should > not happen). > > The Sherwood listings will verify what I am saying - yes, there are > several analog tube-type radios in the Sherwood listing, but they are > pretty far down the list. > > Any microprocessor noise should only be introduced in the audio section, > and with good design, that should not happen either - oh yes, if you have > very good ears, you might be able to hear some at a very low level if you > turn the AF gain up all the way, but that is not a normal condition. > > If your ears feel that the tube audio gear is "warmer" than the solid > state stuff, then consider that the tube gear generates some 2nd and 3rd > order distortion which is normally what makes it sound "warmer". There are > devices available for solid state audio which add a bit of that "warming > sound" to better satisfy the ears of those who like to hear it. > > Certainly, the large speaker enclosures used with old tube-type radios > sound much better than the small speakers in compact solid state radios, so > please don't compare based on those speakers. Connect a good quality audio > system to both radios if you want to make a comparison of that sort. > > 73, > Don W3FPR > > > > On 6/4/2018 8:49 AM, Henry Pollock - K4TMC wrote: > >> Yes, I would like to here what others can add to this thread. One of my >> past hobbies was high-end tube audio electronics, and in numerous set-ups, >> they sounded superior to solid-state equipment. >> >> So, my additional question would be...is the microprocessor >> noise/distortion affecting the RF signal or just the AF signal, or both? >> >> 73, >> Henry - K4TMC >> >> >> On Sun, Jun 3, 2018 at 7:46 PM, Ron Genovesi wrote: >> >> I’m interested. Keep the thread going here >>> >>> Ron Genovesi >>> Sent from My iPad >>> >>> On Jun 3, 2018, at 7:22 AM, Kjeld Holm wrote: >>>> >>>> Dear Bill, >>>> >>>> Parts of the answer can be found at >>>> http://www.sherweng.com/table.html >>>> search for Collins and you will get some 3 - 5 hits. >>>> >>>> Vy 73 de OZ1CCM, Kjeld >>>> >>>> -Original Message- >>>> From: elecraft-boun...@mailman.qth.net >>>> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill >>>> Sent: 3. juni 2018 15:17 >>>> To: elecraft@mailman.qth.net >>>> Subject: [Elecraft] Compare: K3 to Collins S-line receiver >>>> >>>> Discounting the digital capabilities such as memories, DSP, etc. and >>>> only considering actual signal reception: I have had S-lines in the past >>>> (dark dim past), so certainly am familier with them. However, as a point >>>> of curiosity, how does the S-line compare to the K3 (only interested in >>>> SSB). Basically, I am interested in how a top of the line analog >>>> receiver does compares to a K3(S)? The question comes from a QSO >>>> regarding the microprocessor noise of modern rigs covering and/or >>>> distorting received signals. Offline response might be good for this, as >>>> I am sure not many would be interested in the subject. >>>> >>>> Thanks, Bill W2BLC K-Line >>>> >>>> __ >>>>
Re: [Elecraft] Compare: K3 to Collins S-line receiver
Yes, I would like to here what others can add to this thread. One of my past hobbies was high-end tube audio electronics, and in numerous set-ups, they sounded superior to solid-state equipment. So, my additional question would be...is the microprocessor noise/distortion affecting the RF signal or just the AF signal, or both? 73, Henry - K4TMC On Sun, Jun 3, 2018 at 7:46 PM, Ron Genovesi wrote: > I’m interested. Keep the thread going here > > Ron Genovesi > Sent from My iPad > > > On Jun 3, 2018, at 7:22 AM, Kjeld Holm wrote: > > > > Dear Bill, > > > > Parts of the answer can be found at > > http://www.sherweng.com/table.html > > search for Collins and you will get some 3 - 5 hits. > > > > Vy 73 de OZ1CCM, Kjeld > > > > -Original Message- > > From: elecraft-boun...@mailman.qth.net > > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill > > Sent: 3. juni 2018 15:17 > > To: elecraft@mailman.qth.net > > Subject: [Elecraft] Compare: K3 to Collins S-line receiver > > > > Discounting the digital capabilities such as memories, DSP, etc. and > > only considering actual signal reception: I have had S-lines in the past > > (dark dim past), so certainly am familier with them. However, as a point > > of curiosity, how does the S-line compare to the K3 (only interested in > > SSB). Basically, I am interested in how a top of the line analog > > receiver does compares to a K3(S)? The question comes from a QSO > > regarding the microprocessor noise of modern rigs covering and/or > > distorting received signals. Offline response might be good for this, as > > I am sure not many would be interested in the subject. > > > > Thanks, Bill W2BLC K-Line > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to k...@kh-translation.dk > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to n3...@coastside.net > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K2 paint wanted
I have found that the Rust-oleum Automotive Primer spray can, number 2089 DARK GRAY PRIMER, is a very close match for the K2 color. Note that the 2081 LIGHT GRAY version is too light. The 2089 goes on very dark, and is almost black while wet. It is readily available at Home Depot stores. 73, Henry - K4TMC K2/100 #3137 On Thu, Dec 7, 2017 at 9:26 AM, Dave Lankshear <d...@lanks.plus.com> wrote: > Hi everyone. I'm restoring an old Elecraft K2 and need some of the grey > paint for the case, but I see it's no longer offered by Elecraft. > > > > If you'd kindly take a look to see if you still have any and it's still > liquid and no longer wanted, I'd be pleased to purchase it from you and pay > shipping etc. > > > > If you can help, please contact me off list at: dave at lanks dot plus dot > com > > > > Many thanks and 73. Dave, G3TJP (QTHR) > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft] KX2
For a 20M J-Pole look at N1LO's web page - http://www.qsl.net/n1lo/antenna.htm I have used his 10M collinear super J-Pole for years in my HOA-neighborhood back yard hanging from tall tree limbs. For the last 2 years it has been supported by a 55 ft fiberglass mast. It is my year-round go-to antenna for checking conditions on 10M. 73, Henry Pollock - K4TMC On Fri, Jul 15, 2016 at 8:34 AM, Charlie T, K3ICH <pin...@erols.com> wrote: > One other question I have concerns the length of these "EFHW" antennas that > many are using. > That is, are they REALLY End Fed Half-Waves? In other words, are they cut > to be an electrical half wave-length or, are they simply a convenient > length of wire, that is fed at one end? > There could be a drastic difference in the feed point impedance depending > on this parameter. > > Also, what's wrong with making a true "Zepp" antenna on the higher bands by > adding the required length of twin lead for the ¼λ matching section? On > 20 M and up, this would result in a fairly easy length of wire to deal > with. > > Anybody tried that approach? I know the "J-Poles" are popular on VHF, but > how about a 20 meter wire J-Pole? > > 73, Charlie k3ICH > > > -Original Message- > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim > Brown > Sent: Thursday, July 14, 2016 11:42 PM > To: elecraft@mailman.qth.net > Subject: Re: [Elecraft] Elecraft] KX2 > > On Thu,7/14/2016 2:54 PM, Fred C. Jensen wrote: > > I use an EFHW on 80-10, no dedicated counterpoise, no coax length rqmts. > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] New Elecraft Product for Dayton?
For the 'Kit Version' you will have to upgrade your soldering gear to welding equipment! Why wasn't this subject started back on April 1st? 73, Henry - K4TMC On Fri, May 6, 2016 at 9:36 PM, Rick WA6NHC <wa6...@gmail.com> wrote: > As with all things Elecraft, the new K-room is configurable any way the > user desires. Windows, interior and exterior painting, doors, floors and > power type (solar, battery, commercial) are all options. Also suitable for > a more harmonious matrimonial experience if one overspends the household > budget (commonly referred to as the doghouse model). May also be used in a > mobile configuration but without the (apartment) stacking option. Price > does not include delivery or local permit fees. > > Rick nhc > > On 5/6/2016 12:25 PM, Joe K2UF wrote: > >> This is the ultimate K-line shack. Windows will be an optional add on. I >> would put one at the base of my tower but I think the 'boss' might require >> that I live in it. ;o() >> >> 73 Joe K2UF >> >> -Original Message- >> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of >> John >> Pitz >> Sent: Friday, May 06, 2016 2:42 PM >> To: elecraft@mailman.qth.net >> Subject: Re: [Elecraft] New Elecraft Product for Dayton? >> >> new KXPAFULLLEGALLIMIT amp? >> >> >> >> On Fri, 2016-05-06 at 09:56 -0400, Warren Merkel wrote: >> >> I ran across this in an undisclosed location. Could this be the next >>> Elecraft box radio for Dayton? >>> >>> https://dl.dropboxusercontent.com/u/24789865/Elecraft2016DaytonSecretP >>> roject.jpg >>> >>> Warren, KD4Z >>> __ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net Please help support this email >>> list: http://www.qsl.net/donate.html Message delivered to >>> crustac...@brig-elec.com >>> >>> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message >> delivered to j...@k2uf.com >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to wa6...@gmail.com >> > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] 10 meters is wide open right now
It's pretty dead here on the East Coast in NC. No beacons and one station in AZ between 28.4 - 28.5. Henry - K4TMC On Fri, Mar 4, 2016 at 4:17 PM, Wayne Burdick <n...@elecraft.com> wrote: > I'm hearing about 10 times as many beacons as usual from 28.2-28.3. Anyone > else? > > Wayne > N6KR > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] DIY Hard-drawn copper wire
Also...just in case...make sure the wire is longer than the height of the tree... 73, Henry - K4TMC On Thu, Feb 11, 2016 at 9:57 AM, Dave Cole <d...@nk7z.net> wrote: > But the real question is: > > If the tree falls over, and no one hears it, did it really fall over, > and did the wire snap? > > Sorry, I could not resist... > -- > 73's, and thanks, > Dave > > For software/hardware reviews see: > http://www.nk7z.net > > For MixW support see: > https://groups.yahoo.com/neo/groups/mixw/info > > For SSTV help see: > http://groups.yahoo.com/neo/groups/MM-SSTV/info > > > > On Thu, 2016-02-11 at 14:34 +, Dauer, Edward wrote: > > In a recent post Jim, K9YC, suggested making hard-drawn copper wire > > for antennas by attaching a few hundred feet of bare copper wire to a > > tree or telephone pole at one end and to a bumper hitch at the other, > > then driving away very slowly until it snaps. That sounded like a > > very attractive idea - much in the ham tradition. I wondered, > > though, whether it could be done using a car without a bumper > > hitch. The minimum breaking strength of number 8 hard-drawn copper > > wire (though it might be closer to number 10 after being stretched) > > is between 644 and 826 pounds, according to a chart I found on the > > Internet. Rather than test it empirically with my 16-year-old SUV > > (no bumper hitch), I wondered what 700 or 800 pounds of shear force > > would do to an automobile frame, assuming attachment to a suitable > > bolt somewhere. Or would the tree fall over first? > > > > Ted, KN1CBR > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to d...@nk7z.net > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Elecraft SP3 External Speaker - New Thread
I have just spent quite a bit of time reading all the mail relative to the new SP3...but did not see these questions: Will the SP3 have a serial number? If so, can how can I get the number to match my K3? For those with the newer K3S model, can they get one with a SP3S logo? Will there now be a SP2 to match the K2 model? And, a SPX3? 73, Henry - K4TMC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Icom IC-7300
Sherwood Engineering test data is available at http://www.sherweng.com/table.html. The FT-991 was added back on 8/05. It is way down the list! 73, Henry - K4TMC On Thu, Sep 3, 2015 at 11:25 AM, bs usb <bs...@k5dkz.com> wrote: > > I think ICOM is a day late and a dollar short. Yaesu beat them to it with > the FT-991. > I have not found any performance tests on either one of these radios. I > might have to buy one and test it myself. > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kilo4...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Icom IC-7300
Oh boy!.8/05 was to mean August 5th. I did not include the year, since I thought everyone would already know that it is a new rig that came out this year (2015). 73, Henry - K4TMC (crawling back under my rock...) On Thu, Sep 3, 2015 at 2:56 PM, Logan Zintsmaster <lra...@garlic.com> wrote: > If 08/05 means August 2005, the listing is about 10 years too early. The > FT 991 just came out. > > Logan, KZ6O > > > On Sep 3, 2015, at 12:45 PM, bs usb <bs...@k5dkz.com> wrote: > > > > Indeed, the FT-991 is on the list, way down toward the bottom, but its > vitals appear to be right in line with those at the top of the list. > > > > > > Henry Pollock - K4TMC wrote: > >> Sherwood Engineering test data is available at > http://www.sherweng.com/table.html. > >> > >> The FT-991 was added back on 8/05. It is way down the list! > >> > >> 73, > >> Henry - K4TMC > >> > >> On Thu, Sep 3, 2015 at 11:25 AM, bs usb <bs...@k5dkz.com bs...@k5dkz.com>> wrote: > >> > >> > >>I think ICOM is a day late and a dollar short. Yaesu beat them to > >>it with the FT-991. > >>I have not found any performance tests on either one of these > >>radios. I might have to buy one and test it myself. > >>__ > >>Elecraft mailing list > >>Home: http://mailman.qth.net/mailman/listinfo/elecraft > >>Help: http://mailman.qth.net/mmfaq.htm > >>Post: mailto:Elecraft@mailman.qth.net > >><mailto:Elecraft@mailman.qth.net> > >> > >>This list hosted by: http://www.qsl.net > >>Please help support this email list: http://www.qsl.net/donate.html > >>Message delivered to kilo4...@gmail.com <mailto:kilo4...@gmail.com> > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to lra...@garlic.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] OT: Looking for Field Day Site, Columbia SC
Oops...I have sinned! I did what I have seen others do - respond too quickly without fully understanding the question. I apologize for the misdeed. I will crawl back into my hole now...may the reflector gods forgive me... 73, Henry - K4TMC (with K3 #98 still going strong since birth) On Tue, May 26, 2015 at 2:32 PM, Rose elecraftcov...@gmail.com wrote: Henry... The poster is/was looking for a site where a group was going to hold FD, -not- a place to hold a FD event. 73! Ken - K0PP On Tue, May 26, 2015 at 11:16 AM, Henry Pollock - K4TMC kilo4...@gmail.com wrote: Ian, One potential site may be the Congaree National Park. It is just south of Columbia. They do have a camping site location, there are rest rooms and plenty of parking for cars and trucks. I just did a drive-by and short visit last week on the way to a job in Augusta. There is no admittance fee to enter the park. The negatives are that it is in a low area along the Congaree River and the mosquito factor may be high in June. Not sure what their restrictions may be on radio operations. 73, Henry - K4TMC Raleigh, NC On Tue, May 26, 2015 at 10:47 AM, Ian - Ham km4ik@gmail.com wrote: All, I have an acquaintance in the Columbia, SC, area, who is interested in getting into amateur radio. I suggested that Field Day would be a great place for him to really get a good look at today's amateur radio. When I checked the ARRL Field Day Locator, there are no sites listed yet for Columbia. Does anyone on list know of any Field Day activities in Columbia? He lives in the Lexington/West Columbia/South Congaree areas, but I'll happily provide him info on any Field Day site anywhere in Metro Columbia. Thanks for your help. 73 de, --Ian Ian Kahn, KM4IK Roswell, GA EM74ua km4ik@gmail.com mailto:km4ik@gmail.com 10-10 #74624, North Georgia Chapter #2038 PODXS 070 #1962 K3# 281, P3 #688, KAT500 #860, KPA500 #1468 --- This email has been checked for viruses by Avast antivirus software. http://www.avast.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to kilo4...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to elecraftcov...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] OT: Looking for Field Day Site, Columbia SC
Ian, One potential site may be the Congaree National Park. It is just south of Columbia. They do have a camping site location, there are rest rooms and plenty of parking for cars and trucks. I just did a drive-by and short visit last week on the way to a job in Augusta. There is no admittance fee to enter the park. The negatives are that it is in a low area along the Congaree River and the mosquito factor may be high in June. Not sure what their restrictions may be on radio operations. 73, Henry - K4TMC Raleigh, NC On Tue, May 26, 2015 at 10:47 AM, Ian - Ham km4ik@gmail.com wrote: All, I have an acquaintance in the Columbia, SC, area, who is interested in getting into amateur radio. I suggested that Field Day would be a great place for him to really get a good look at today's amateur radio. When I checked the ARRL Field Day Locator, there are no sites listed yet for Columbia. Does anyone on list know of any Field Day activities in Columbia? He lives in the Lexington/West Columbia/South Congaree areas, but I'll happily provide him info on any Field Day site anywhere in Metro Columbia. Thanks for your help. 73 de, --Ian Ian Kahn, KM4IK Roswell, GA EM74ua km4ik@gmail.com mailto:km4ik@gmail.com 10-10 #74624, North Georgia Chapter #2038 PODXS 070 #1962 K3# 281, P3 #688, KAT500 #860, KPA500 #1468 --- This email has been checked for viruses by Avast antivirus software. http://www.avast.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to kilo4...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 and what's next from Elecraft
Well...how about a transverter microwave board for the KPA500 and a matching-size sealed-RF box that can be used as a heating chamber for those frozen dinner packages...thus saving a trip to the kitchen for a substantial meal. Of course, it could be marketed as a 500 watt DC-to-light dummy load. Maybe even add a clock with timer circuit and a few extra buttons for labeling of your choice (defrost, cook, etc.) on a front-opening door. 73, Henry - K4TMC (recently retired with lots of dreaming time) On Thu, Aug 22, 2013 at 4:26 PM, W4SK w...@comcast.net wrote: In that case, I'd like to ad that I am sick and tired of having to GET UP from radioing with my K3 and WALK to the kitchen to fix coffee and those toasted cheese appetizers that you talked me out of. Why doesn't Elecraft ad a small coffee maker and toaster oven to the K3? Just an option, of course, but surely a badly needed one. And maybe better suspension parts, so it will corner like a Porsche 911. -W4SK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] For Sale - handled/rackmount brackets/panels for K2
If those are the ones like I have, they were made by David Saylor (WK4DS) of Saylor's Machine Design, Trenton, GA. Not sure if he makes them anymore. I have them for both my K2 and K3. They are made from 1/4 inch thick aluminum and add some additional stiffness and weight to the units. The rack handle feature was also on the end at the rear of the rig. They also provide protection from bumping the knobs and connectors when moving the rigs around on the shack bench or packaging for trips. 73, Henry - K4TMC -Original Message- From: John Evans - N0HJ jaev...@pcisys.net To: Elecraft Elecraft@mailman.qth.net Sent: Sun, Jan 13, 2013 2:14 pm Subject: [Elecraft] For Sale - handled/rackmount brackets/panels for K2 Greetings, A long time ago, someone manufactured and offered a pair of unfinished aluminum side brackets/panels for the K2 for those of us who wanted to replace them with something with handles much like rack mount equipment would have. I purchased these but do not know who made/sold them. If anyone would have a need for these, I offer them up in the US for $18.00 shipped in a padded mailer. The two side panels are drilled for the mounting holes similar to the K2 side panels and includes a set of screws. 73 - john - n0hj __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Are you satisfied with your K3?
Ditto here too! 73, Henry - K4TMC K3/100 #98 -Original Message- From: Bill Clarke b...@w2blc.net To: elecraft elecraft@mailman.qth.net Sent: Wed, Dec 5, 2012 2:25 pm Subject: [Elecraft] Are you satisfied with your K3? I AM As my K3 operates today, it is the best receiver I have ever used - and the list is over fifty years long. The settings I use were posted here several days ago. They are directed towards armchair copy use - I doubt if they would do much to enhance a DXer's or contester's use. I have posted a lot of questions, complaints, and barbs regarding my K3 - which I built in February of this year. However, with the posts and emails I received (that were constructive in nature), I gained enough knowledge about the K3 and its menus, to send me in the right direction to correct what I perceive as K3 deficiencies. Along the way, I have found the Cady Manual to be top notch and totally necessary for understanding the K3. I keep a file of posts made here and on the Yahoo Group that have been informative. I make all my settings the hard way using the K3 menus, as I have experienced failures when making changes via K3 EZ (possibly related to Win7). Anyway, the long and short is that I am now very pleased with my K3 - it is a keeper. Bill W2BLC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] OT: Kenwood's new rig?
Regardless of how well it performs, a lot of people will want it for the number of front panel controls. This must be a new record! 73, Henry - K4TMC -Original Message- From: Bob K6UJ k...@pacbell.net To: Elecraft List elecraft@mailman.qth.net Sent: Tue, May 8, 2012 10:43 pm Subject: Re: [Elecraft] OT: Kenwood's new rig? Yes Kenwoods new TS-990S is expected to be unveiled at Dayton. A picture and information about the TS-990S is on the on the back of the June 2012 QST http://qrper.com/2012/05/kenwood-publishes-first-photo-of-the-kenwood-ts-990s/ (If interested in discussing further, there is a Yahoo group for the 990 now. ) 73, Bob K6UJ On May 8, 2012, at 7:19 PM, Ken G Kopp wrote: TS-990S - To be unveiled at Dayton? http://www.cqdx.ru/ham/new-equipment/ts-990_picture/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Was Re: KX3 Fixed Ops- now: KXPA100 preliminary details
Wayne, Do those dimensions and weight include the ATU option? And, will the KXPA100/ATU be remote-able over some significant distance (attic/backyard) from the rig? 73, Henry - K4TMC -Original Message- From: Wayne Burdick n...@elecraft.com To: Doug Faunt N6TQS +1-510-655-8604 fa...@panix.com Cc: elecraft@mailman.qth.net Sent: Mon, May 23, 2011 1:20 pm Subject: Re: [Elecraft] Was Re: KX3 Fixed Ops- now: KXPA100 preliminary details The KXPA100 will probably weigh less than 5 pounds. Wayne N6KR On May 23, 2011, at 9:00 AM, Doug Faunt N6TQS +1-510-655-8604 wrote: Speaking of the KXPA100, I've not seen any information as to projected size and weight of it. Have I missed something (easy to do right now), or is it still too early even for preliminary information? 73, doug On 22-May-11 16:57, Robert Friess wrote: The KXPA100 is a separate stand-alone unit that does not mount on the KX3. 73, Bob, N6CM On Sun, May 22, 2011 at 9:01 AM, Eugene Balinskieuge...@nni.com wrote: There has been a flurry of questions about the KX3. I do not remember seeing this one. Does anyone know if the KX3 will mount to the 100w PA/ATU to create a single unit for fixed operation ? 73 Gene K1NR - Web mail provided by NuNet, Inc. The Premier National provider. http://www.nni.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 Fixed Ops
Re the KX3 is designed to be a super-compact user interface that sits on the operating desk, and the 100w PA/ATU can be anywhere, like under the desk. Hopefully, it will be remote-capable like at the base of your vertical out in the back yard, at the feedpoint of your attic or tower mounted dipole, etc. And hopefully, it will be directly compatible with a K2/10 and K3/10. Wishing and hoping... 73, Henry - K4TMC -Original Message- From: Jim Brown j...@audiosystemsgroup.com To: elecraft@mailman.qth.net Sent: Sun, May 22, 2011 1:04 pm Subject: Re: [Elecraft] KX3 Fixed Ops On 5/22/2011 9:01 AM, Eugene Balinski wrote: Does anyone know if the KX3 will mount to the 100w PA/ATU to create a single unit for fixed operation ? I have heard the suggestion from Wayne that the KX3 is designed to be a super-compact user interface that sits on the operating desk, and the 100w PA/ATU can be anywhere, like under the desk. If you've ever tried to figure out how to drag stuff for a DX trip on an airline, you've got to love the design of this new radio system! Those you need a big boat on your operating desk are welcome to line up at the TenYaeComWood booths. I'm FAR happier with the options that Elecraft provides us. Talk about dragging stuff for a DX trip -- W0YK travels several times a year from SFO to Aruba with two K3s in Rose Copp cases as carry-ons and uses them to set world records in RTTY contesting. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 pics
Looks nice; but I would have expected a little lower profile knobs. But, I am more interested in the KX3P100 with ATU... 73, Henry - K4TMC -Original Message- From: Walt nw_ra...@yahoo.com To: elecraft@mailman.qth.net Sent: Fri, May 20, 2011 3:16 pm Subject: [Elecraft] KX3 pics try twitpic . . http://twitpic.com/506j4e there are others . Walt - KC7CM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] We need to develop the Ideal Antenna!
Bob, How about just a basic dipole? Or, a fan dipole that resonates on the appropriate bands. 73, Henry - K4TMC -Original Message- From: AB5N 7000...@gmail.com To: elecraft@mailman.qth.net Sent: Fri, May 13, 2011 1:31 pm Subject: [Elecraft] We need to develop the Ideal Antenna! Hi Guys- Well, I'm in week two of enjoyment with my new KX-1. I did have a few problems in assembling, but that is history. This little rig has a simple receiver which has only half the sensitivity of a usual radio. As well, we are dealing with 3-4 watts TX out max. We have to have an excellent antenna. I've tried the suggested 25 ft. long wire with radials. Ah, it's not good enough. I even got some strange RX-feedback internally at some frequencies using it. I believe the criteria for an excellent antenna will be as follows: 1. Will match up well using the internal tuner on all four bands. 2. Has enough metal in the air to provide adequate microvolts to the RX - to make it function well without being overloaded. 3. Provides some gain - or at least a clean predictable pattern 4. Is light, compact and easy to deploy. My inkling is that a normal Carolina Windom may be the thing. I'll work on developing a micro-QRP version. What doesn't work? Classic G5RV (102 Ft) - will not load on any band with tuner. Offset-Zepp fed with Coax (75'x25') What say guys? Anybody have superb luck with an antenna yet? Bob-AB5N -- View this message in context: http://elecraft.365791.n2.nabble.com/We-need-to-develop-the-Ideal-Antenna-tp6360270p6360270.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Elecraft at Raleigh NC RARSfest
It was great to see all of the old and new Elecraft gear displayed at the RARSfest today! 73, Henry - K4TMC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 custom extended sides
Mike, I have the ones for the K2 and K3. David was very good to work with on the K3 plates. Since he did not have any at the time, I sent him my stock side plates and he made the new ones using those as a template. He returned the stock plates with the new thicker plates. The new parts give both the K2 and K3 a little more stiffness and weight, plus a nice look. Could not be happier with David's work... Now, this was right after I got my K3, #98. So, it has been a while. Not sure what the status of the company is now. 73, Henry Pollock - K4TMC K2/100 #3137 K3/100 #98 -Original Message- From: a...@sbcglobal.net To: elecraft@mailman.qth.net Sent: Mon, Apr 18, 2011 5:22 pm Subject: [Elecraft] K3 custom extended sides Has anyone had dealings with Saylors Machine Shop and ordered the extended sides for the K3? My email to David Saylors bounced, and a phone call got rerouted to a different business answering machine. Mike AC5P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K2] Hardened K2 for HFPack and K3
Saylors Machine Design Works also made some nice thick aluminum side panels for the K2 with rack-type handles at the front and rear. I got a set for my K2, and also had them do a matching pair for my K3. Not sure if they still do them. A Google search for the above name brings up the web site but no mention of the Elecraft items. 73, Henry - K4TMC -Original Message- From: John Fritze fritzej...@gmail.com To: elecraft@mailman.qth.net Sent: Sat, Apr 2, 2011 2:46 pm Subject: [Elecraft] [K2] Hardened K2 for HFPack? I would be interested in a set of these elongated end panels too. Unfortunately it seems the person who used to make them, Randy K3QO (ex WJ4P) was killed in a plain accident a while back. John K2QY __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] elecraf/K4TMC??
Gary and all Elecraft users, I apologize for any spam that has been generated from my email account. I have taken measures to hopefully preclude this from happening again. Somehow, after over 10 years with the current account, my email account was compromised. Not sure how it happened, but I started getting hundreds of failed email notes in my spam filter. Since no one notified me of the issue, I was not aware of it until yesterday afternoon. 73, Henry Pollock - K4TMC -Original Message- From: Gary K9GS garyk...@wi.rr.com To: 'Elecraft' elecraft@mailman.qth.net Sent: Sat, Mar 19, 2011 5:28 pm Subject: [Elecraft] elecraf/K4TMC?? I'm sure by now everyone has seen the elecraf spam that got posted to the reflector. I've got a filter set up in my e-mail client to filter out k4...@aol.com Even after all of this, every time I connect to my server to retrieve mail another copy shows up in my spam filter. I'm up to 50+ today alone. Is anyone else seeing this? Do I need to do anything else to get rid of this or do I possibly have some malware lurking on my computer? And no, I didn't click on the link in the spam e-mail. Spammers should be hung by their genitals and slowly skinned with a rusty pocket knife. -- 73, Gary K9GS Check out K9NS on the web: http://www.k9ns.com Greater Milwaukee DX Association: http://www.gmdxa.org Society of Midwest Contesters: http://www.w9smc.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] elecraf
elecraf my job was killing me if you have a minute theres something I wanted to show you I think that this can be useful in the right hands http://bit.ly/dGuVBT its fun having money to blow the results will stun you __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA-500 vs THP
A lot of us want the KAT500 as a remote matching unit that can be used near the antenna versus a shack-bound unit. 73, Henry - K4TMC -Original Message- From: Johnny Siu vr2...@yahoo.com.hk To: Igor Sokolov ua9...@gmail.com; Phil Hystad phys...@mac.com Cc: Wes Stewart n...@yahoo.com; Elecraft elecraft@mailman.qth.net Sent: Tue, Jan 25, 2011 8:31 am Subject: [Elecraft] KPA-500 vs THP Hello Igor, Really have no idea about KAT500. Same as you, I would like KPA500+KAT500 in one box. This arrangement will give better transportation convenience. cheers, Johnny VR2XMC 寄件人﹕ Igor Sokolov ua9...@gmail.com 收件人﹕ Johnny Siu vr2...@yahoo.com.hk; Phil Hystad phys...@mac.com 副本(CC) Wes Stewart n...@yahoo.com; Elecraft elecraft@mailman.qth.net 傳送日期﹕ 2011/1/25 (二) 8:47:23 PM 主題： Re: [Elecraft] Re： KPA-500 vs THP Yes, good exercise. Except ICPW1, all the prices are WITHOUT antenna tuning unit. Based on that, the price per watt for SPE is say $3.9 per watt but with built-in ATU. THP will be sure out of my consideration. cheers, Johnny VR2XMC In addition SPE understands any make of TRCVR not only Icom. What I specially like is that the amp follows TX frequency getting the information from CAT system but then it dowble checks it with own RF sense and frequency counter before switchin to TX. I just wonder if KAT-500 is going to be integrated into KPA500 or will it be in a separate box? 73, Igor UA9CDC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Fwd: [FCG] Fwd: [PVRC] Who's taking what rig to WRTC
I am sure they are working on it...but waiting to make sure that the top teams (1 - 44) used Elecraft rigs! 73, Henry - K4TMC -Original Message- From: Lu Romero lrom...@ij.net To: elecraft@mailman.qth.net Sent: Wed, Jun 30, 2010 5:53 pm Subject: [Elecraft] Fwd: [FCG] Fwd: [PVRC] Who's taking what rig to WRTC Hello Elecraft Principals and Advertising agency... I think there is an ad somewhere in this message posted by fellow Elecrafter K2AV... :) 73 Lu Romero - W4LT (currently portable 9V1 until 7/21) - If you want to know what rig is on top these days, can't think of a more factual in-your-face irrefutable documentation than this...import listings to get stuff into Russia for WRTC. Thanks to W4ZV for the links: http://www.wrtc2010.ru/press/R3_license_for_DME.pdf and http://www.wrtc2010.ru/press/R3_license_for_SVO.pdf Total listed rig count is ~90 (also subject to a few changes K3: 42 K2: 2 MP (all kinds): 10 Pro III: 4 Orion: 3 IC7600: 3 IC7800: 2 FT2000: 2 Flex 5000: 1 Not a single Kenwood. Elecraft vs. Yakencom's front line rigs combined, 42-7. In a memorable 1977 baseball season the Yankees swept a late season four game series from the Red Sox in Fenway by a combined score of 44-8 to pull back into contention for the AL pennant. They still call that the Boston Massacre. 42-7 .. ?? 73, Guy. __ PVRC mailing list Home: http://mailman.qth.net/mailman/listinfo/pvrc Help: http://mailman.qth.net/mmfaq.htm Post: mailto:p...@mailman.qth.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Elecraft KAT500 (was Auto Tuner)
GREAT! My prayers for an Elecraft remote tuner may soon be answered, although I don't need a 500 watt version. 73, Henry - K4TMC K2/100 and K3/100 -Original Message- From: Wayne Burdick n...@elecraft.com To: elecraft@mailman.qth.net reflector Elecraft@mailman.qth.net Sent: Wed, Jun 16, 2010 6:50 pm Subject: [Elecraft] Elecraft KAT500 (was Auto Tuner) In case anyone was wondering: We are definitely planning to ship a new high-power autotuner next year. It will be an ideal companion tuner for the KPA500 and other amplifiers in the 500-600 W class (full rating on 160-6 m). It will be offered in both a desktop model (P3 size) and a remote model for use at the antenna. Both will feature latching relays to minimize operating current. It will support various industry-standard control protocols. 73, Wayne Eric __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KPA500 Option Request
OK, to get this thread started Since we cannot seem to get a remote version of the K2 or K3 antenna tuners, and one of the earlier posts about the KPA500 indicated that it may work into an SWR of 3:1...how about a remote version of the KPA500? Just run a heavy-duty outdoor extension cord for the 120VAC power. 73, Henry - K4TMC K2 #3137 and K3 #98 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Extreme
Or better yet, a K3 iPad app 73, Henry - K4TMC -Original Message- From: Steve Ellington n...@carolina.rr.com To: Don Rasmussen wb8...@yahoo.com; elecraft@mailman.qth.net Sent: Tue, Feb 2, 2010 7:15 pm Subject: Re: [Elecraft] K3 Extreme Nice skins but a K3 IPOD app would be cooler. Steve N4LQ - Original Message - From: Don Rasmussen wb8...@yahoo.com To: elecraft@mailman.qth.net Sent: Tuesday, February 02, 2010 6:44 PM Subject: [Elecraft] K3 Extreme Coming Soon... http://www.zerobeat.net/mediawiki/index.php/K3_EXTREME __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.733 / Virus Database: 271.1.1/2663 - Release Date: 02/02/10 02:35:00 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html = __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] P3 Sneak Peak
For those of us who would just like a K3-matching speaker/power supply box, would someone look at it with the perspective of not having an LCD screen, and report back to the list. And here I was hoping that an Elecraft remote antenna tuner was closer to critical mass than a panadapter. 73, Henry - K4TMC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3: machined concentric knobs from Mouser
Yes, the extended side panels are a good alternative to some type of front cover. I have them for my K3 and K2. Mine were made by David Saylor (forgot the call) at www.saylorsmachine.com (select the link for capabilities). They are 1/4 inch thick, so will add some weight to the K3. Hey...maybe Rose could make something that would slip over the front with a velco strap or elastic band for tightening. 73, Henry - K4TMC K3/100 #98 and K2/100 #3137 -Original Message- From: Doug Faunt N6TQS +1-510-655-8604 fa...@panix.com To: br...@livecomputers.com Cc: Elecraft@mailman.qth.net Sent: Thu, Jul 30, 2009 1:49 pm Subject: Re: [Elecraft] K3: machined concentric knobs from Mouser My plan was to use bits of Velcro to hold it on. Extended side panels would give more protection and a good way to hold them on, too. My K2's have extended side panels, thanks to someone on this list. 73, doug From: Brett Howard br...@livecomputers.com Date: Thu, 30 Jul 2009 10:30:25 -0700 Admittedly I'd pay 30 to 35 bucks for a snap on front cover much like the newer Agilent oscilloscopes do today. I'm not sure it would be all that possible to snap on being that there are no snap features built into the rig itself at the moment. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] RE: Any Amplifier News
Yes, more goodies for the K3...a REMOTE version of the KAT3 that can be placed at (or near) the antenna feedpoint. 73, Henry - K4TMC K3/100 #98 -Original Message- From: dj7...@muenchen-mail.de To: elecraft@mailman.qth.net Sent: Tue, 23 Dec 2008 5:32 am Subject: Re: [Elecraft] RE: Any Amplifier News If I were Wayne and Eric, (which manifestly I am not), I would think not twice but many times about investing design and production... I also would think that Wayne and Eric will also be looking towards more goodies for the K3, i.e. Panadapters, variable bandwidth roofing filters, improving the already excellent firmware of the K3, etc., which however doesn't change my lust for a KPA1500 or KPA800. ;-) Happy Holidays! vy 73 de toby --DD5FZ (ex 4n6fz, dj7mgq, dg5mgq, dd5fz) K2 #885, K2/100 #3248, K3/100 #67 ___ Elecraft mailing list Post to: elecr...@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 KDVR manual
Yes, manual please! I would like to know if it will perform all of the functions of a SSB contest DVK (digital voice keyer). I want it to replace my MFJ-434 unit. A review of the manual would hopefully answer my questions. That way I can decide to respond positively to a shipment notification from the Elecraft sales staff. I do not look forward to installing it due to the control panel disassembly required. So, I want it to be worth my effort. 73, Henry - K4TMC K3/100 #98 -Original Message- From: Ian Maude [EMAIL PROTECTED] To: Elecraft Reflector elecraft@mailman.qth.net Sent: Wed, 3 Dec 2008 12:40 pm Subject: [Elecraft] K3 KDVR manual Any chance of getting a look at the manual guys? I want to 'build it' in anticipation of receiving mine soon :) 73 Ian -- Ian J Maude, G0VGS SysOp GB7MBC DX Cluster Member RSGB, GQRP K2 #4044 |K3 #455 http://www.amateurradiotraining.org ___ Elecraft mailing list Post to: [EMAIL PROTECTED] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Fwd: [Elecraft] ATU vs. External Tuner - Please
All of the suggestions so far are good; however, it sure would be great if Elecraft would offer a true remote tuner that can be mounted at the antenna feedpoint. This might even alleviate the need for some of us to consider a KPA800, etc. As an alternate, maybe a kit to make the existing KAT3 remoteable would be good. 73, Henry - K4TMC K3/100 #98 -Original Message- From: Julian, G4ILO [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Sun, 26 Oct 2008 12:31 pm Subject: Re: [Elecraft] ATU vs. External Tuner Frank MacDonell wrote: I have a k3 with internal antenna tuner connected to a 40 meter dipole in the attic. Will the internal ATU work for me visiting other bands or would I be better off installing a tuner between the rig and the antenna? Is an auto tuner more preferred than automatic? Thanks to all for your time. That depends on what antennas you will be using on other bands and what the SWR will be. Although the KAT3 will match a wider range of loads than the internal ATUs in most non-Elecraft radios, the SWR still exists between the output of the tuner and the antenna, and and can result in considerable signal loss if coaxial cable is used (see http://www.g4ilo.com/antenna.html). I used a KAT2 to tune a non-resonant loop in my attic for several years, but my shack is in the room directly below the attic and the length of the coax was only about 8 feet. If you are a much longer distance from your antenna feed point then you would be better off either using open wire feed and an external balanced tuner, or else using a battery powered remote automatic ATU in the attic at the feed point so you use a coax feeder without undue loss. If you will be trying to use your 40m dipole on other bands then the mismatch will be quite considerable on most of them and you should consider one or other of the options stated above. If on the other hand you add resonant lengths for other bands to the same feed point, creating a fan dipole, then you should be able to get a good match on those bands and you will be able to use the KAT3 without worrying about feeder loss. - Julian, G4ILO. K2 #392 K3 #222. http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3 -- View this message in context: http://n2.nabble.com/ATU-vs.-External-Tuner-tp1379087p1379371.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] EC3? ec3sp??
Yes! Something around 7 inches wide, such that front firing speaker and power supply will fit; making the side-by-side combo suitable for fiting a rackmount cabinet space. But, I am sure that there are others that want a full-size empty K3 space for even more goodies - a link-coupled antenna tuner, a 500 to 1KW solid-state HF amplifier, a 16:9 ratio LCD screen for the panadaptor and viewing the forthcoming blockbuster video documentary - The K3 Files! 73, Henry - K4TMC K3/100 #98 -Original Message- From: Bill NY9H [EMAIL PROTECTED] To: [EMAIL PROTECTED]; elecraft@mailman.qth.net Sent: Thu, 25 Sep 2008 6:46 pm Subject: Re: [Elecraft] EC3? ec3sp?? about 6-8 wide... with grilles for 2 spkrsfront facing, of course. like the EC2/kat100/kpa100 for my K2 http://picasaweb.google.com/Bill.SteffeySr/K3#5164773634425387490 It is about the right size for the LCD / panadapter also. :) bill At 11:08 AM 9/25/2008, [EMAIL PROTECTED] wrote: I know that you can get an empty case, the ec2 to match the k2 I just asked elecraft if there were any plans to market a case (ec3?) to match the K3:- I do not know of any plans at this time, but I will certainly pass along your interest and we'll see if there is enough interest to consider it in the future. Lisa Anyone with similar needs might like to express their interest to them I want to put a 12V smps in one . The ec2 doesnt look right alongside a K3! Dave WW2R ___ Elecraft mailing list Post to: [EMAIL PROTECTED] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: [EMAIL PROTECTED] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 on front cover of Oct QST
Yes Virginia, that is a K3 on the front cover of the October issue of QST. You may need a magnifying glass... 73, Henry - K4TMC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K1 - BC-221 Box For Sale
I have a BC-221 box that is in very good condition for sale ($20.00 plus shipping from NC). All of the internal electronics are missing. This would make a great portable case for a K1 (or other similar sized rigs) and several accessories. Seems to me that there was a picture on the Elecraft web site somewhere in which a K1 was installed in a BC221 box. Contact me direct if interested. Otherwise, I will wait a week before placing it on eBay. 73, Henry - K4TMC ** Pt...Have you heard the news? There's a new fashion blog, plus the latest fall trends and hair styles at StyleList.com. (http://www.stylelist.com/trends?ncid=aolsty000514) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Re: K1 - BC-221 Box For Sale - SOLD
The BC-221 box is sold. 73, Henry - K4TMC ** Pt...Have you heard the news? There's a new fashion blog, plus the latest fall trends and hair styles at StyleList.com. (http://www.stylelist.com/trends?ncid=aolsty000514) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Beta Firmware, Revision 2.31 - Remote ATU
YES! We need a remote version of the KAT100. That would help improve a lot of signals. 73, Henry - K4TMC K3/100 #98 K2/100 #3137 -Original Message- From: Julius Fazekas n2wn [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Fri, 29 Aug 2008 10:16 am Subject: Re: [Elecraft] K3 Beta Firmware, Revision 2.31 Tom, Ask for a remote Low Power antenna tuner that will work with the K2 and K3 ;o) Cheers, Julius n2wn wayne burdick wrote: Tom Childers, N5GE wrote: * CW SIDETONE INCREMENTS NOW 10 HZ (originally 50 Hz). [snip] Yahooo! Excellent! Now I can set the pitch exactly for these old ears and work CW without the hearing aids :O) Thank you, thank you, thank you, You're welcome, Tom. What else can we design for you today? :) 73, Wayne N6KR --- http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com -- View this message in context: http://n2.nabble.com/K3-Beta-Firmware%2C-Revision-2.31-tp790252p792301.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] More Balanced Current Measurements - Voltage Balun - Remote Tuner
YES! PLEASE, Please...a remote version of one of the 100W Elecraft antenna tuners is greatly needed. Even more so than a 500 - 1000 W amp. I get a chuckle every time I read that someone worked rare DX with their K3/100 and KAT3 combo using 100 ft of 50 ohm coax out to a multiband vertical o r dipole. 73, Henry - K4TMC K2/100 #3137 and K3/100 #98 ** Looking for a car that's sporty, fun and fits in your budget? Read reviews on AOL Autos. (http://autos.aol.com/cars-Volkswagen-Jetta-2009/expert-review?ncid=aolaut00030 7 ) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] u want nice audio?
Tongue out of cheek... Having been the owner of several fine Vandersteen (note correct spelling for those doing Google searches) speaker systems, I can recommend Don's suggestion. However, depending on your HF radio, be prepared for some strange sounds. High-end audio equipment will reveal a lot of warts in your source material (this time your rig). And, the better your home audio system (interconnect and speaker cables included), the more warts you wil l hear. You may find that listening to CW and SSB sounds better on those $5.00 speakers. Now, with my tongue in cheek...better yet, take the rig into your home theater room and plug it into the system. Now, if we could only get Elecraft t o add a video output of the Front Panel Display, you could watch everything in high definition splendor! Better yet, how about the whole front panel as a video display - as you adjust controls, they would move on the TV screen, the appropriate LED would light up as you changed functions... Wow! Time for some kool-aid. 73, Henry - K4TMC K3/100 #98 ** Looking for a car that's sporty, fun and fits in your budget? Read reviews on AOL Autos. (http://autos.aol.com/cars-BMW-128-2008/expert-review?ncid=aolaut000517 ) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3: BW direction?
Another 2 cents... My all-time old favorite rig, the even older Kenwood TS830S' VBT had the counter-clockwise turn = narrower bandwidth. So, Elecraft's implementation is exactly what I like. It brings back fond memories of my early contesting days. 73, Henry - K4TMC K3/100 #98 ** Get fantasy football with free live scoring. Sign up for FanHouse Fantasy Football today. (http://www.fanhouse.com/fantasyaffair?ncid=aolspr000520) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2/K3 Protective Thick Side Panels
Someone was selling some nice 1/4 inch thick aluminum side panels for the K2 several years ago, that when mounted provided handles for carrying the K2 and protecting the front and rear panels. I got a set for one of my K2's and am wondering if they are, or will be, available for the K3. I have not seen them mentioned in quite a while on the reflector. Does anyone know who made them? 73, Henry - K4TMC K2/100 #3137 K3/100 #98 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] KRX3 status
Ed, Sounds interesting. Please give us a summary of you impressions of the K3s' and KRX3's performance. 73, Henry - K4TMC K3/100 #98 ** Get trade secrets for amazing burgers. Watch Cooking with Tyler Florence on AOL Food. (http://food.aol.com/tyler-florence?video=4?NCID=aolfod000302) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] RE: Dayton 2008 and IC7200
I like those handles on the ends and the built-in front firing speaker. The handles would be a nice option for the k3. And a 4 to 5 inch wide (0.5EC-3) cabinet could hold a nice front firing speaker and a switching power supply. If this could be attached to the K3 side panel and then add some rack-panel handles, you would have a nice 19-inch wide rack panel package. 73, Henry - K4TMC K3/100 #98 ** Wondering what's for Dinner Tonight? Get new twists on family favorites at AOL Food. (http://food.aol.com/dinner-tonight?NCID=aolfod000301) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 Soft Carrying Case
Received my carrying case from Rose Kopp. An excellent product for storing and transporting your K3. Not quite as protective as a hard-sided case like a Pelican, but great for protecting it in the shack when not being used (in my case, between SSB contests) or as carry-on luggage on a flight to a DX-pedition . The quality of construction and materials is excellent. There is an outside pocket that will hold your K3 Operating Manual, and an inside pocket that will hold the new K3 Niffty Quick Reference Guide. Get one before the inevitable price increase! :-) 73, Henry - K4TMC K3/100 #98 ** Wondering what's for Dinner Tonight? Get new twists on family favorites at AOL Food. (http://food.aol.com/dinner-tonight?NCID=aolfod000301) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 - Expedition version
John, One important factor is how far away from the water's edge your antenna is located relative to your frequency's wavelength. There was an extensive series of articles in NCJ a few years ago providing details. 73, Henry - K4TMC ** Planning your summer road trip? Check out AOL Travel Guides. (http://travel.aol.com/travel-guide/united-states?ncid=aoltrv000316) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 - Expedition version
The articles were titled Verticals By The Sea, by Al Christman, K3LC in the July/Aug 2005, Sept/Oct 2005, and Nov/Dec 2005 issues. 73, Henry - K4TMC ** Planning your summer road trip? Check out AOL Travel Guides. (http://travel.aol.com/travel-guide/united-states?ncid=aoltrv000316) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] New Contest Transceiver
I wonder if that is the rig that the Clipperton group is using right now? I can just see the ads come Dayton time 73, Henry - K4TMC ** It's Tax Time! Get tips, forms, and advice on AOL Money Finance. (http://money.aol.com/tax?NCID=aolprf000301) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 Utility revision 1.1.3.6 ?
I pulled up Wayne's note from March 7 about the new K3 Firmware (MCU 1.75 / DSP 1.57), and went to the K3 Software Page to download the latest update utility (1.1.3.6) that was mentioned. It's not there. Can I use the existing utility (1.1.2.28) to download the new firmware and expect no problems? Or, should I wait until the new utility is available? 73, Henry - K4TMC K3/100 #98 ** It's Tax Time! Get tips, forms, and advice on AOL Money Finance. (http://money.aol.com/tax?NCID=aolprf000301) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 in different colors?
I want one in Isuzu Proton Yellow to match the color of my 2001 Vehicross. It will compliment my yellow driving jacket, writing pen, beach towel, caps, travel bags, and the Pennzoil motor oil. Hopefully Ken (N0PP) and Rose can provide a matching cover in that color also. 73, Henry - K4TMC K3/100 #98 ** Ideas to please picky eaters. Watch video on AOL Living. (http://living.aol.com/video/how-to-please-your-picky-eater/rachel-campos-duffy /2050827?NCID=aolcmp0030002598) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Chasing the numbers
Gary, Based on your scenario, it would take me a few hours operating a contest to make a decision, but I feel confident that I could pick the better receivers out of the group, for my purposes. Now, this may not be the same selection that someone else makes. However, if you have a large enough group of operators and ask them to pick the best 2 or 3 rigs, over a period of time, you should arrive at the best rig. Relative to the specification numbers. They are part of the equation. One of my criteria for a good receiver is its fatigue factor (sorry, there are no none numbers for this parameter, its all subjective). But, the numbers associated with the AGC parameters, the blocking characteristics, the IMD numbe rs, etc., all add up to affect that fatigue factor. Other things that you do not normally see in the published data are the specific characteristics/parameters of the components, processors and circuits that pass the audio portion of the signal. For me, these can have significant impact on my fatigue factor. Someone else has mentioned the TS830. I had one for several years, and did numerous mods, including INRAD filters in both IF's. Until I started using a K 2, it was my standard reference rig. Subsequent rigs (TS850 and FT1000MP, both with INRAD filters) never approached the 830's low fatigue factor. But both of those newer rigs had better numbers. So, what does all of this mean? The low fatigue factor allows your brain to do more of the signal processing. The strange noises that some rigs generate impact your brain's ability to process the audio. As a result, the be tter number rigs have a better chance of having a low fatigue factor, but it is not a guarenteed situation. As they say...YMMV. 73, Henry - K4TMC ** Ideas to please picky eaters. Watch video on AOL Living. (http://living.aol.com/video/how-to-please-your-picky-eater/rachel-campos-duffy /2050827?NCID=aolcmp0030002598) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Calling the K3 USERS GROUP on SSB
I like that frequency. I'm ready to play. Let's talk about rig colors, mods, delivery schedules, new manufacturing locations, and reviews. After a few weeks, we should be able to come up with s ome other interesting topics. 73, Henry - K4TMC ** Ideas to please picky eaters. Watch video on AOL Living. (http://living.aol.com/video/how-to-please-your-picky-eater/rachel-campos-duffy /2050827?NCID=aolcmp0030002598) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 - Why buy a kit?
And, that is why I have not opened-up my K3 since it was built. I did not want any of that Mojo to escape! 73, Henry - K4TMC K3/100 #98 ** Ideas to please picky eaters. Watch video on AOL Living. (http://living.aol.com/video/how-to-please-your-picky-eater/rachel-campos-duffy /2050827?NCID=aolcmp0030002598) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Re: HPS-1a (was Power Supply for K3 ?)
I tried using one of the HPS-1a units back in Nov during the ARRL Phone Sweepstakes. I found that it was not quite adequate for my modified K2/100. My mods were to the speech processor and mic gain, used with a Heil HC4 element. I was getting reports of distorted audio peaks. I switched to a 20+ amp linear supply and never had any more problems. I just used the K3/100 with a Radio Shack 25 amp switcher this weekend during the CQ 160 SSB Contest, and had no problems. 73, Henry - K4TMC 2 K2/100's and K3/100 #98 -Original Message- From: Phil Debbie Salas [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Sun, 24 Feb 2008 7:30 pm Subject: [Elecraft] Re: HPS-1a (was Power Supply for K3 ?) I have a fairly detailed review of the HPS-1a in the Equipment Reviews section of my website (www.ad5x.com). There are definately duty cycle requirments to consider. It does work pretty well for SSB, and for full QSK CW at reasonable CW speeds. All my testing was done with my IC-706G at the time. Frankly, I think it is a good power supply for portable operation since it is so tiny and light. But for a regular station power supply, I prefer something a little heftier. Just my opinion. Phil - AD5X ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com More new features than ever. Check out the new AOL Mail ! - http://webmail.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] VP6DX Success Due to K3's or Antennas?
I don't want to spoil the Elecraft Mojo theory, but does anyone have any details, other thqan what is on the VP6DX web site, on what antennas they are using with the k3's? Do the vertical dipoles have parasitic elements? Are they using low-loss coax? Etc. Inquiring minds would like to know. 73, Henry - K4TMC K3 #98 ** Ideas to please picky eaters. Watch video on AOL Living. (http://living.aol.com/video/how-to-please-your-picky-eater/rachel-campos-duffy /2050827?NCID=aolcmp0030002598) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] KAT100 Remote Operation
Before I go buy a competing remotable antenna tuner - has anyone developed a way to operate the KAT100 over 100 ft from a K2? I want to put the antenna tuner up in the attic closer to the outside antennas. If LDG, MFJ SGC can do it, why can't we? 73, Henry - K4TMC K3 #98 K2 #3137 4796 More new features than ever. Check out the new AOL Mail ! - http://webmail.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 KBPF3 Benefits without SubReceiver?
Kyle, et al, Thanks for the quick responses. OK, it looks like the KBPF3 turns the K3 into a general coverage receiver without having to order the SubReceiver option. That sounds like a reasonable option to have to allow listening to the CB/FRS bands :-) My concern about the mounting location is the affect of the KBPF3 circuit board with similar tuned circuits in such close proximity to the ham band tuned circuits. The affect may be subtle and only detectable in unusually strong signal situations. I just do not want to add something that could slightly reduce the K3's performance in the ham bands. Instead, I can buy a good used separate 0.5 - 30 MHz receiver for SWBC coverage for the same price as the KBPF3. 73, Henry - K4TMC -Original Message- From: Lyle Johnson [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: elecraft@mailman.qth.net Sent: Sat, 22 Dec 2007 10:17 pm Subject: Re: [Elecraft] K3 KBPF3 Benefits without SubReceiver? ... what benefit would it be to get the KBPF3 General Coverage RX Filter Module? ... will this impact the performance while in the ham bands? The KBPF3 is switched into the signal path instead of the ham-band bandpass filters when you tune the K3 outside the ham bands. When you are tuned inside the ham bands, it is bypassed and the standard ham-band filters are used. There is no practical degradation of ham-band performance, and greatly enhanced reception when outside the ham bands. I use mine regularly! Merry Christmas, Lyle kK7P More new features than ever. Check out the new AOL Mail ! - http://webmail.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Automatic 1:1/4:1 Balun switching under K3 control?
David, Not to worry...I am sure someone will develop a mod to change the BL2 to a BL3. 73, Henry - K4TMC -Original Message- From: David Ferrington, M0XDF [EMAIL PROTECTED] To: wayne burdick [EMAIL PROTECTED] Cc: Elecraft Reflector elecraft@mailman.qth.net Sent: Thu, 20 Dec 2007 3:21 pm Subject: Re: [Elecraft] Automatic 1:1/4:1 Balun switching under K3 control? I just bought a BL2 with my K3 - why wasn't there a BL3 then! HiHi I'd be interested, especially if the KAT3 worked the relay when tuning too On 20/12/07 20:00, wayne burdick [EMAIL PROTECTED] sent You've also given me an idea for a BL3: Same as the BL2 but with a relay rather than a switch for selecting 1:1 vs. 4:1. We could then use one of the K3's spare output lines (say DIGOUT1) to switch the relay under firmware control, per-band. There would be one wire running from the AUX I/O connector to the BL3, and you'd need to power the relay from the K3's switched 12 VDC accessory output. If this is of interest, I'll ask the BL2's designer to take a look at it. I have the same problem myself, so I already want two :) -- DonŒt complain. Nobody will understand. Or care. And certainly donŒt try to fix the situation yourself. ItŒs dangerous. Leave it to a highly untrained, unqualified, expendable professional. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com More new features than ever. Check out the new AOL Mail ! - http://webmail.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 Filter Switching Problem?
Warning! K3 filter use item follows. Currently, I only have the standard 2.7 KHz filter in the FL3 slot on the RF board. I chose this location due to potential future additions of the 2.1 and 1.8 KHz filters, in slots FL2 and FL1 respectively. Here is what I observe: With FL3 manually selected via the XFIL button; when I try to rotate the Width control below a value of 2.7 KHz, the rig automatically switches to the FL1 position, which is empty. The receiver goes dead. When I quickly reverse the Width adjustment, FL3 is not switched back. I have to manually select FL3 again with the XFIL button. Once back in FL3, I can adjust the Width control to higher values above 2.7 KHz with no problem and the passband gets wider. Is this normal? I thought the DSP circuit would continue to narrow the passband even though the roofing filter is broader. But, why does it switch to an empty filter slot? Did I do something wrong during the Configuration setup? Is this a firmware issue? I have not downloaded the latest updates yet. If I had narrower filters in the FL1 and FL2 slots, then I would expect the circuit to auto-switch to those as I narrowed the passband via the Width control. And, they should switch back in reverse order as I widen the passband. Right? 73, Henry - K4TMC K3 #98 More new features than ever. Check out the new AOL Mail ! - http://o.aolcdn.com/cdn.webmail.aol.com/mailtour/aol/en-us/text.htm?ncid=aolcmp000503 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Fwd: [Elecraft] K3 Filter Switching Problem? - Solved
You K3 guys are great! Thanks for the quick responses. I had not set all of the FL1 positions to OFF during the filter setup activity. It pays to read carefully, and then re-read, some of those instructions. The Width function now operates as I was expecting. 73, Henry - K4TMC K3 #98 -Original Message- From: [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Mon, 10 Dec 2007 6:06 pm Subject: [Elecraft] K3 Filter Switching Problem? Warning! K3 filter use item follows. Currently, I only have the standard 2.7 KHz filter in the FL3 slot on the RF board. I chose this location due to potential future additions of the 2.1 and 1.8 KHz filters, in slots FL2 and FL1 respectively. Here is what I observe: With FL3 manually selected via the XFIL button; when I try to rotate the Width control below a value of 2.7 KHz, the rig automatically switches to the FL1 position, which is empty. The receiver goes dead. When I quickly reverse the Width adjustment, FL3 is not switched back. I have to manually select FL3 again with the XFIL button. Once back in FL3, I can adjust the Width control to higher values above 2.7 KHz with no problem and the passband gets wider. Is this normal? I thought the DSP circuit would continue to narrow the passband even though the roofing filter is broader. But, why does it switch to an empty filter slot? Did I do something wrong during the Configuration setup? Is this a firmware issue? I have not downloaded the latest updates yet. If I had narrower filters in the FL1 and FL2 slots, then I would expect the circuit to auto-switch to those as I narrowed the passband via the Width control. And, they should switch back in reverse order as I widen the passband. Right? 73, Henry - K4TMC K3 #98 More new features than ever. Check out the new AOL Mail ! - http://o.aolcdn.com/cdn.webmail.aol.com/mailtour/aol/en-us/text.htm?ncid=aolcmp000503 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com More new features than ever. Check out the new AOL Mail ! - http://o.aolcdn.com/cdn.webmail.aol.com/mailtour/aol/en-us/text.htm?ncid=aolcmp000503 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 Mic Setting for HC4?
K3 #98 is working well. Has anyone found the right settings of Mic Gain (Hi/Lo?), Comp, VOX Gain, and VOX delay for the Heil HC4 element? Trying to get on the air for the 10M contest... 73, Henry - K4TMC More new features than ever. Check out the new AOL Mail ! - http://o.aolcdn.com/cdn.webmail.aol.com/mailtour/aol/en-us/text.htm?ncid=aolcmp000503 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft K3 Support on the Weekends? - Update
Ron, Thanks for the clarification on the changes. I did find that the changes are less significant than I first thought. So, I am proceeding with Rev B, but am also following the same steps in Rev C. My frustration was centered around the changes relative to the PA Jumper Block. One manual implied that I would not need it since I had the 100 watt amp, while the other clearly stated that I still needed it. Then I became concerned about what other similar changes that may be forthcoming as I proceeded. And, the manual information on the web page would not allow me to track the changes between my manual and the latest manual. Coupled with that was finding the item missing from a board that was supposed to be checked before shipment. The jumper block is the only thing that can be easily removed from the RF board. Thusly, that should be a high priority check before placing them into the bags. As an aside for others, my professional background is quality assurance/quality control, and these types of problems are normal issues that develop in manufacturing new products or in low quantity standard products. This goes along with the already discussed product delays. For those concerned about the dog...she is fine. I found that I did not have to print the whole Rev C manual; therefore, I took her for a walk. The fresh air helped both of us! Also, I did get a response from Elecraft Support on Saturday afternoon, less than 24 hours after my separate note to them. Realizing that it is the weekend and the workload they may be experiencing, I find that satisfactory. I found that I have been spoiled by the quicker responses from Elecraft users and experts like W3FPR, etc. Lisa can expect a phone call from me Monday requesting a PA Jumper Block. Back to the workbench...and more frequent walks... 73, Henry - K4TMC -Original Message- From: Ron D'Eau Claire [EMAIL PROTECTED] To: [EMAIL PROTECTED]; elecraft@mailman.qth.net Sent: Sat, 1 Dec 2007 11:23 pm Subject: RE: [Elecraft] Elecraft K3 Support on the Weekends? Not a bit. Rev B will get you there perfectly. Rev C streamlines the process to remove perhaps 5 minutes of work, that's all. Because many steps were moved around, if you've started assembly with Rev B I recommend you finish using that Rev to be sure you don't miss any steps. Ron AC7AC -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Saturday, December 01, 2007 5:24 PM To: [EMAIL PROTECTED]; elecraft@mailman.qth.net Subject: Re: [Elecraft] Elecraft K3 Support on the Weekends? So... I am wasting my time trying to build my K3 with the Assembly Manual (Rev B-1) that came in the box! I really did not want to throw away the manual that came in the box, but it apparently is of little value now. I am now stopping work and printing a new manual. 73, Henry - K4TMC (while its printing I think I'll go kick the dog) -Original Message- From: Ron D'Eau Claire [EMAIL PROTECTED] To: 'Elecraft Reflector' elecraft@mailman.qth.net Sent: Sat, 1 Dec 2007 8:03 pm Subject: RE: [Elecraft] Elecraft K3 Support on the Weekends? While most revisions to a new letter involve incorporating the items shown in the errata, there was an additional major change made between Rev B and Rev C of the K3 Kit Assembly Manual. The procedure was reorganized to allow builders with the KPA3 100 watt amplifier module to install the KPA3 shield assembly during the initial build. That avoids removing the bottom covers and KNB3 module and standoff later to install the shield. New steps were added to actually install the shield, a number of existing steps were moved to put them in the most convenient order. Almost every page in the assembly procedure was changed in order to accomplish that. Ron AC7AC -Original Message- On Sat, 01 Dec 2007 16:00:35 -0500, you wrote: Simon, et al, [snip] As an aside, it sure would be nice to know what changed from manual revision to revision. That way I could just update the manual that came with the kit originally. In my full-time job, when a procedure is changed, there is always a sheet describing what paragraphs/sentences/pages were changed. That makes it easy to see where the differences exist. [snip] Go to the web site and download the errata for the manuals in question is how I would find out. Tom, N5GE - SWOT 3537 - Grid EM12jq ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com More new features than ever. Check out the new AOL Mail ! - http://o.aolcdn.com/cdn.webmail.aol.com/mailtour/aol/en-us/text.htm
[Elecraft] Elecraft K3 Support on the Weekends?
Is Elecraft Support active on the weekends? No response received from a late Friday afternoon note about a missing part. My RF board is missing the PA Jumper Block. Any other K3 builders have this problem? Is it safe to proceed with assembly? 73, Henry - K4TMC K3 #98 More new features than ever. Check out the new AOL Mail ! - http://o.aolcdn.com/cdn.webmail.aol.com/mailtour/aol/en-us/text.htm?ncid=aolcmp000503 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft K3 Support on the Weekends?
Simon, et al, Thanks for the quick responses. I thought that with all of us building these over the weekend, there would be someone answering support questions. But, I know they have been busy, and maybe need some time off to deal with other issues. I do have the KPA3 100 watt amp to install. The assembly manual that came with the kit indicates that it is not necessary if you are going to install the KPA3. However, the picture in the manual does show it already installed from Elecraft. The latest assembly manual, from the web site, indicates that you will still need the PA Jumper Block to do some initial testing before installing the KPA3. So, I am trying to get clarification as to whether I really need it. And, if I do, I need to get someone to ship me one. As an aside, it sure would be nice to know what changed from manual revision to revision. That way I could just update the manual that came with the kit originally. In my full-time job, when a procedure is changed, there is always a sheet describing what paragraphs/sentences/pages were changed. That makes it easy to see where the differences exist. 73, Henry - K4TMC K3#98 -Original Message- From: Simon Brown (HB9DRV) [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sat, 1 Dec 2007 3:22 pm Subject: Re: [Elecraft] Elecraft K3 Support on the Weekends? You can continue, you will not need it if you have the 100W PA. It should / could be on the mainboard anyway. Simon Brown, HB9DRV - Original Message - From: [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Saturday, December 01, 2007 9:09 PM Subject: [Elecraft] Elecraft K3 Support on the Weekends? Is Elecraft Support active on the weekends? No response received from a late Friday afternoon note about a missing part. My RF board is missing the PA Jumper Block. Any other K3 builders have this problem? Is it safe to proceed with assembly? 73, Henry - K4TMC K3 #98 More new features than ever. Check out the new AOL Mail ! - http://o.aolcdn.com/cdn.webmail.aol.com/mailtour/aol/en-us/text.htm?ncid=aolcmp000503 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com More new features than ever. Check out the new AOL Mail ! - http://o.aolcdn.com/cdn.webmail.aol.com/mailtour/aol/en-us/text.htm?ncid=aolcmp000503 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft K3 Support on the Weekends?
So... I am wasting my time trying to build my K3 with the Assembly Manual (Rev B-1) that came in the box! I really did not want to throw away the manual that came in the box, but it apparently is of little value now. I am now stopping work and printing a new manual. 73, Henry - K4TMC (while its printing I think I'll go kick the dog) -Original Message- From: Ron D'Eau Claire [EMAIL PROTECTED] To: 'Elecraft Reflector' elecraft@mailman.qth.net Sent: Sat, 1 Dec 2007 8:03 pm Subject: RE: [Elecraft] Elecraft K3 Support on the Weekends? While most revisions to a new letter involve incorporating the items shown in the errata, there was an additional major change made between Rev B and Rev C of the K3 Kit Assembly Manual. The procedure was reorganized to allow builders with the KPA3 100 watt amplifier module to install the KPA3 shield assembly during the initial build. That avoids removing the bottom covers and KNB3 module and standoff later to install the shield. New steps were added to actually install the shield, a number of existing steps were moved to put them in the most convenient order. Almost every page in the assembly procedure was changed in order to accomplish that. Ron AC7AC -Original Message- On Sat, 01 Dec 2007 16:00:35 -0500, you wrote: Simon, et al, [snip] As an aside, it sure would be nice to know what changed from manual revision to revision. That way I could just update the manual that came with the kit originally. In my full-time job, when a procedure is changed, there is always a sheet describing what paragraphs/sentences/pages were changed. That makes it easy to see where the differences exist. [snip] Go to the web site and download the errata for the manuals in question is how I would find out. Tom, N5GE - SWOT 3537 - Grid EM12jq ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com More new features than ever. Check out the new AOL Mail ! - http://o.aolcdn.com/cdn.webmail.aol.com/mailtour/aol/en-us/text.htm?ncid=aolcmp000503 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Mystery Solved
Ron, I like the idea of the rosin scented candles. And, with the Elecraft logo, and a nice box, these would make great gift ideas for a ham. 73, Henry - K4TMC -Original Message- From: Ron D'Eau Claire [EMAIL PROTECTED] To: 'Elecraft Reflector' elecraft@mailman.qth.net Sent: Fri, 30 Nov 2007 12:12 am Subject: RE: [Elecraft] Mystery Solved Dave W7AQK wrote: I'm about ready to tackle things now though, so maybe by the weekend I'll have my K3 percolating. It's a strange feeling though not having to get out the soldering iron! --- Have fun! It's okay to fire up the soldering iron! From time to time reach over and touch it with the solder so a little puff of rosin smoke floats up to sooth the end of that cold! (Just don't touch the soldering iron to anything that goes inside your K3.) Maybe Elecraft should offer rosin-scented candles or aerosol cans as an option -- sort of a Ham's version of new car smell. Ron AC7AC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com More new features than ever. Check out the new AOL Mail ! - http://o.aolcdn.com/cdn.webmail.aol.com/mailtour/aol/en-us/text.htm?ncid=aolcmp000503 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 Serial No. 98 Arrives in NC
While at work (some of us have to work versus wait at the front door with camera) today, a white box similar to other reported white boxes was deposited. I have not opened all of the interior boxes, but inside one of the top flaps was hand written SN 98. So, for now, I assume that Number 98 is accounted for. This order was placed on April 30 via a PayPal payment. The box was shipped on Nov. 16 via UPS Ground. I was somewhat surprised that it took over a week for a coast to coast ground shipment. My experiences with rival FedEx Ground have found quicker and better service and sometimes cheaper cost. 73, Henry - K4TMC K3 #98 Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Poor Man's ESD Mat?
First, don't worry, I have not started to remove anything from the ESD bags. There is quite a lot of that pink antistatic bubblewrap protecting the pieces of the K3 kit. Is is possible that those could be used as a static dissipating work mat? 73, Henry - K4TMC Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Poor Man's ESD Mat? End of Thread
OK, thanks for all the responses. I got the message! It's like this - the package was not scheduled to arrive until tomorrow. I leave tomorrow morning for a business trip, and had planned to pick up a mat while on the trip. You know what a kid is like with a new toy! I was trying to decide whether it was OK to use the pink stuff temporarily. So, to play it safe, I just did some of the basic mechanical assembly (carry handle, rubber feet, SO239). That will suffice until I get a mat this week. It will be the weekend before things can get started anyhow. 73, Henry - K4TMC -Original Message- From: Don Wilhelm [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: elecraft@mailman.qth.net Sent: Mon, Nov 26 9:47 PM Subject: Re: [Elecraft] Poor Man's ESD Mat? Ahhh, come on Henry - Surely, you can spare $20 for an anti-static mat to protect your $1300+++ investment in the K3 kit! TigerDirect (www.tigerdirect.com) has their stock number ULT33122 priced at $19.99. I don't know if they are available in the local store, but a phone call might give you that info. I have no relationship with TigerDirect except as a customer - I'm just passing information along. If you really want to go inexpensive, roll out some aluminum foil to keep everything at the same potential - you can even ground the foil with a 1 megohm resistor to the AC equipment ground that is likely found on every receptacle in the house. Congratulations on receiving your K3, and Happy Building. 73, Don W3FPR [EMAIL PROTECTED] wrote: First, don't worry, I have not started to remove anything from the ESD bags. There is quite a lot of that pink antistatic bubblewrap protecting the pieces of the K3 kit. Is is possible that those could be used as a static dissipating work mat? 73, Henry - K4TMC Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Poor Man's ESD Mat? End of Thread
OK, thanks for all the responses. I got the message! It's like this - the package was not scheduled to arrive until tomorrow. I leave tomorrow morning for a business trip, and had planned to pick up a mat while on the trip. You know what a kid is like with a new toy! I was trying to decide whether it was OK to use the pink stuff temporarily. So, to play it safe, I just did some of the basic mechanical assembly (carry handle, rubber feet, SO239). That will suffice until I get a mat this week. It will be the weekend before things can get started anyhow. 73, Henry - K4TMC -Original Message- From: Don Wilhelm [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: elecraft@mailman.qth.net Sent: Mon, Nov 26 9:47 PM Subject: Re: [Elecraft] Poor Man's ESD Mat? Ahhh, come on Henry - Surely, you can spare $20 for an anti-static mat to protect your $1300+++ investment in the K3 kit! TigerDirect (www.tigerdirect.com) has their stock number ULT33122 priced at $19.99. I don't know if they are available in the local store, but a phone call might give you that info. I have no relationship with TigerDirect except as a customer - I'm just passing information along. If you really want to go inexpensive, roll out some aluminum foil to keep everything at the same potential - you can even ground the foil with a 1 megohm resistor to the AC equipment ground that is likely found on every receptacle in the house. Congratulations on receiving your K3, and Happy Building. 73, Don W3FPR [EMAIL PROTECTED] wrote: First, don't worry, I have not started to remove anything from the ESD bags. There is quite a lot of that pink antistatic bubblewrap protecting the pieces of the K3 kit. Is is possible that those could be used as a static dissipating work mat? 73, Henry - K4TMC Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 and K2 Side by Side Photo?
Has anyone with both a K3 and K2 taken any side by side photos? Are they posted anywhere? If not, then a frontal, top, rear and side view would be interesting. And, if you want to have the UPS delivery person hold them, that's OK. :-) 73, Henry - K4TMC (K3 #?? on mule train heading to NC) Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Egg Crates
If you want something a little sturdier, then consider some refrigerator ice cube trays. Most of the egg cartons I see in the grocery stores these days are made from foam material. These used to be made from a heavier duty cardboard material. Depending on how many parts are in the carton and their weight, you could pick up the tray, have a break, and then have parts spilled everywhere. The ice cube trays I have seen recently are made from plastic. And, they used to make the ice cube trays from aluminum, which were very robust. Check your neighborhood yard/garage sales and the local thrift stores. You might luck up and find an aluminum version. Still waiting for that e-mail from Lisa 73, Henry - K4TMC -Original Message- From: Bill Tippett [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Wed, 31 Oct 2007 3:22 pm Subject: [Elecraft] Egg Crates I know many have suggested using egg crates as parts containers for Elecraft kits but here's a hint that may be of help to some. Rather than using the 1 dozen egg crates found at your local supermarket, ask your favorite restaurant for a few of the larger size they use for eggs in bulk. These have 6X5 compartments in a 12X12 format. One should be sufficient for the ~30 different types of hardware in the K3 but the price is right (free) so you might pick up a few more for more complex Elecraft kits. 3 of them nest very compactly in a 12X12X2.5 space when empty. 73, Bill W4ZV ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3: supplied power cable specs?
Oh No! Instead of toroids, I have to build power pole connectors! Is there a Power Pole Guy out there? :-) 73, Henry - K4TMC -Original Message- From: Eric Swartz - WA6HHQ, Elecraft [EMAIL PROTECTED] To: Mike B [EMAIL PROTECTED] Cc: Elecraft Reflector elecraft@mailman.qth.net Sent: Tue, 23 Oct 2007 7:39 pm Subject: Re: [Elecraft] K3: supplied power cable specs? 12 Ga, 5 ft. Power Pole connectors on one end, unterminated on the other end. This cable is built for the Assembled K3s. Kit for for the kits. 73, Eric WA6HHQ -- Mike B wrote: Just out of curiosity (as I sit here revamping my station's power system), what gauge and length is the power cable supplied with the K3? I see it has Power Poles installed on one end - is the other unterminated? Thanks and 73, Mike KW1ND ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] [K3] The Wait is A Little Easier
For those worrying about getting their K3 before the next Sun Spot cycle starts – not to worry. Check out the story at this link: science.slashdot.org/article.pl?sid=07/10/16/1735258from=rss The guys/gals in Aptos have some very influential/powerful friends who have managed to delay the next cycle enough for more K3’s to be out there… Live long and prosper… 73, Henry - K4TMC Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] OT: 40' mast on Ebay dirt cheap.
Yes, they are dirt cheap for a reason. Note the area around the bottom ends. That area is lighter than the other area of the section. This tells me that they have been used a lot or mishandled. Mishandling of these type masts is the main reason that they are not very good for use at heights over 25 ft. The joint areas are the weak link in these surplus 'fiberglass' masts. Note also that they are not truly all fiberglass, but have loose fiberglass pieces held together with a resin/plastic bonding agent. Under stress, they easily crack at the female end. That is why there is an extra ring around the female end. There are several variations of these available. The ones with the fiberglass ring at the female end are the best, if they have not been mishandled. I would avoid those with plastic rings, since they tend to break much easier. I have seen new ones right out of the storage warehouses with plastic rings falling apart. But, even the fiberglass rings will also crack if mishandled. If left outside for extended periods, the binding agent dissapates due to the Sun's UV. This then leaves little slivers of fiberglass exposed, which can get embedded in your skin if not wearing gloves. Bottomline - paint them if you want them to last outside. Also, to strengthen the joint area, use a stainless steel hose clamp around the ring, or where the ring use to be. As someone else mentioned, they are getting harder to find, but even harder is finding those that are worth using. Now for the disclosure: I use to sell these also, but for the above reasons, no more. I do continue to sell the aluminum versions, which are much stronger, tolerant of mishandling and over-stressing. 73, Henry - K4TMC -Original Message- From: Stephen Przepiora [EMAIL PROTECTED] To: Elecraft Reflector Elecraft@mailman.qth.net; QRP-L [EMAIL PROTECTED] Sent: Fri, 12 Oct 2007 2:03 pm Subject: [Elecraft] OT: 40' mast on Ebay dirt cheap. Just to let you all know, there is a guy selling 40' fiberglass military mast with carrying case with a buy it now price of $25.00. He also has a Military Nylon Rope Tie Down Kit that has two 50' ropes (so what) and six velcro straps with rings you can use as guying connectors. Link to store: http://stores.ebay.com/Military-Surplus-Junk Shipping from PA to NY was going to be $12.00 I know this is not lightweight stuff, but some of us do not backpack in and operate far from the vehicle :) Steve - KC2QXE ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3s Start Shipping!
BRAVO! Now...don't drink too much of that bubbly stuff. 73, Henry - K4TMC -Original Message- From: Eric Swartz - WA6HHQ, Elecraft [EMAIL PROTECTED] To: Elecraft List elecraft@mailman.qth.net Sent: Tue, 9 Oct 2007 9:48 pm Subject: [Elecraft] K3s Start Shipping! The first production K3s started shipping today! (Oct 9th) :-) We worked overtime last week and through the weekend to get everything in order. We had the usual last minute glitches (missing hardware we thought we had received, MORE toroid winding in Aptos, minor PCB assembly errors, documentation snafu's etc.) but we were able to resolve everything in time for shipping today. Whew! Here's a picture of Lisa with the first K3/100 kit of this batch going out the door. :-) http://www.elecraft.com/K3/Lisa%20with%20K3%20a%20sm.JPG After today's batch of K3s we will pause shipping for two days to let the dust settle and to make doubly sure we have everything in proper order. We will continue testing and packaging the K3 kits tomorrow and Thursday. We'll resume shipping on Friday and should continue shipping on a daily basis, Monday-Friday, after that. This week we are beginning with the kit versions of the K3. Mid next week the first built K3s will begin rolling out the door. The rest of this week we will be contacting those of you that will be shipping over the next two weeks. Due to the very high number of orders that we received the first day at Visalia and via FAX/Internet (actually the first couple of weeks!) we will not be shipping all the first day orders on the first day, or two, or three. :-) But we are working hard to get everyone's K3 out the door quickly. Initial shipment rates will of course start out in small groups and slowly accelerate to more units per day as we ramp up. But our top priority to to make sure we get you a complete and quality product. Please be patient with us. We're just as anxious as you to get your radio on its way. The K3 Operating manual is complete and I'll be posting it and the K3 option manuals to the web by end of day tomorrow. I'll post a note here when they are on-line. Now, where is that champagne... 73, Eric WA6HHQ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Re: K3 Shipping Status Update - Sept. 18, 2007
I like the idea of a book. But lets not stop there, how about a documentary video, or better yet, a suspense drama movie with the title - A Secret in Aptos, or something catchy. Then we can start discussions about who will play the parts of Eric, Wayne, Lisa, etc. 73, Henry - K4TMC -Original Message- From: Dan Allen [EMAIL PROTECTED] To: wayne burdick [EMAIL PROTECTED]; Eric Swartz - WA6HHQ Elecraft [EMAIL PROTECTED] Cc: Elecraft Discussion List elecraft@mailman.qth.net Sent: Wed, 19 Sep 2007 11:50 am Subject: Re: [Elecraft] Re: K3 Shipping Status Update - Sept. 18, 2007 Maybe after all of this is over, and the dust settles (and you guys get some sleep), a posting, or magazine article (or book) about the birthing of the K3 could be written. It's already obvious that it would be interesting reading! Dan Allen KB4ZVM K2 S/N 1757 Eric Swartz - WA6HHQ Elecraft wrote: We have started an 'all hands on-deck' toroid winding operation in Aptos as an insurance policy Eric, You need to spend less time sending epic e-mails and more time winding toroids ;) Wayne ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 specs
Eric, If you want someone else to beat up on the vendors...just list their names here on the reflector. I am sure they will then be flooded with phone calls. Better yet, if those vendors need help in getting their products to you, maybe we can mobilize some K3-owners-to-be to quickly arrive and expedite matters. My field of expertise is quality control and quality assurance. Any of those vendors near NC? 73, Henry - K4TMC Raleigh, NC -Original Message- From: Eric Swartz - WA6HHQ, Elecraft [EMAIL PROTECTED] To: Thom LaCosta [EMAIL PROTECTED] Cc: Elecraft elecraft@mailman.qth.net; Don Rasmussen [EMAIL PROTECTED] Sent: Thu, 13 Sep 2007 5:42 pm Subject: Re: [Elecraft] K3 specs And we're still short several key parts, so we won't ship on the 17th. :-( I'm waiting for replies from several vendors and will post as soon as I have good information. I'm beating on them as hard as I can.. :-) 73, Eric WA6HHQ --- Thom LaCosta wrote: On Thu, 13 Sep 2007, Don Rasmussen wrote: We're four days from the target date for the first K3 delivery and performance numbers are being released. What could this mean? ;-) That there really are K3s, that there are measurements and Santa Claus has gainful employment. 73 - k3hrn Thom,EIEIO Email, Internet, Electronic Information Officer www.baltimorehon.com/Home of the Baltimore Lexicon www.tlchost.net/hosting/ Web Hosting as low as 3.49/month ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Shipping Delays
Re the K4. Didn't Wayne or Eric just have a new child? I believe it was named K4 Serial Number 1 :-) I guess I will not be showing a K3 at the Shelby NC Hamfest - my K3 has not arrived yet... 73, Henry - K4TMC -Original Message- From: Brett gazdzinski [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Mon, 27 Aug 2007 2:48 pm Subject: RE: [Elecraft] K3 Shipping Delays On the other hand, you can keep on improving almost anything indefinitely. I myself figure another month, that way, if it arrives before that I will be real happy. Lots of work for those Elecraft folks, the amplifier, the panadaptor, the remote K3 antenna tuner, the K4, etc I think they been goofing off, sleeping and eating even! Brett N2DTS Much has been posted here about this topic. I've also seen (and heard) considerable correspondence from some top operators who have been testing pre-production K3s under some rather torturous contest and QRN conditions. Although I'm not privy to internal communications at Elecraft, I'd bet that this testing has caused some of the fine points of the design to be tweaked. I'd also bet that like any other manufacturer, Elecraft is experiencing delays on deliveries of critical parts. So, while we're anxious to see the finished product on our operating bench, the second sort of delays are to be expected from any mfr who is reasonably picky about what parts they buy and where they buy them, and the first sort of delays will result in a better radio. So cool your jets, and give Wayne and Eric the breathing space to do their jobs. They have a long history of doing that very well. 73, Jim Brown K9YC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Shelby Hamfest: K3?
Well...I'm not a beta tester, but I'm about 3 hrs away from Shelby. If the crew at Elecraft want to go ahead and ship my K3 early, I'll consider taking it out to Shelby. (wink!) 73, Henry - K4TMC Raleigh, NC -Original Message- From: Richard S [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Fri, 17 Aug 2007 6:07 pm Subject: [Elecraft] Shelby Hamfest: K3? Hi All, The Shelby Hamfest is coming up in a few weeks. (Shelby, NC Aug 31, Sep 1, and Sep 2) Does anyone know if Elecraft will be there, or else one of the beta testers, to demo the K3? I was looking for a hamfest link on the Elecraft web site, that would give information on hamfests where one could see the various Elecraft products. It may be there, but I couldn't find that type of info. Perhaps that would be a nice edition to the web site once the dust settles from the K3 rollout. See you at Shelby! 73, Richard, AI4SH ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Fwd: [Elecraft] K3 shipping status update
Great! This will give me more time to get in some summer fishing and vacation. 73, Henry - K4TMC -Original Message- From: Eric Swartz WA6HHQ - Elecraft [EMAIL PROTECTED] To: Elecraft List elecraft@mailman.qth.net Sent: Mon, 23 Jul 2007 7:24 pm Subject: [Elecraft] K3 shipping status update Our field testers are a very diligent and experienced bunch. They've been working hard (on your behalf, as well as theirs) to exercise every possible K3 feature and uncover opportunities for refinement. The firmware development team (Wayne, N6KR, and Lyle, KK7P) has been putting in very long hours to keep up, and we've made some minor component changes as well. As a result, important features like FSK mode, text decode/display, flexible VOX control, KRC2 support and many others are being optimized under real-world conditions. We've also verified our performance on multiple K3s both in the lab and on the air. The field testers have really pounded on the user interface, and the tweaking we've done has made the radio both easier to use and more versatile. The same engineers who are doing firmware and hardware development are also heavily involved in completing the user documentation. This is why we haven't been able to release a draft owner's manual or assembly manual. We've got a lot of catching up to do on these tasks, so we're revising our target shipping date for the first K3 production run to start at the end of August. K3 materials purchasing and manufacturing is well underway and our staff has been working hard to make sure all of the key K3 components arrive in Aptos at the right time. This is a tremendous task, as you might imagine, and they have done an excellent job hunting down every problem supplier and component. Our production staff will use the extra time to build inventory and refine our automated K3 testing. This will allow us to minimize any delay to the second and later production runs. Our goal is to ship a stable, and high quality, product starting with the first one out the door. We think you will be pleased with our results. We appreciate your patience as we transition into full K3 production. We'll keep you informed of our progress, and look forward to your feedback on the manuals as they near completion. We've already had many offers to proofread -- thanks! 73, Wayne, N6KR Eric, WA6HHQ _..._ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
