Hi Framers,
I'm updating a long-used FM document for accessibility. Using FM 2019's
Table > Convert to Table function, I converted existing formatted
paragraphs with tabbed columns into an actual table.
The conversion correctly applies table title and column header formats. But
it ignores all
Hi Framers,
I carefully set FM (2019) PDF Setup for Tags for my book. Yet no matter how
I convert to PDF (save as or print), not a single thing appears to be
tagged in the converted PDF when opened in Acrobat DC (2021) with
Accessibility tool(s) on. I tested files individually, and they behave
and Distiller tabs as expected. But I can't make it show
up in the Tags tab.
Any clues?
Running FM2019 version 15.0.5.838. I know there are updates up to #7, but
still waiting for my IT to confirm if and which updates have been made to
this install (maybe through #4?).
Thank you,
Karen Robbins
Thank you, Robert Lauriston!
At first, Windows wouldn't cooperate because it thought there wasn't enough
space on the virtual disk. I gave it more space (though it seemed
counter-intuitive), and the trial FM2019 did uninstall using the Control
Panel Uninstall action. Yay!
I have always relied on
Hi Framers,
After my IT folks botched it, I must uninstall the trial version of FM2019
without damaging the still-functional FMv11 that runs in my virtual Windows
7.
(The trial either tries to launch, shows the splash screen for a bit, then
shuts down; or opens with the "trial expired" message,
Craig,
Thanks for the tips. I'll give them a try.
Karen
On Wed, Jun 19, 2019 at 2:21 PM
wrote:
>
> Date: Tue, 18 Jun 2019 22:51:47 +
> From: Craig Ede
> To: An email list for people using Adobe FrameMaker software.
>
> Subject: Re: [Framers] Mystery Tags in HTML Mapping Table
>
Hi Framers,
I have carefully prepared the HTML mapping table (for a large single
document) but FM 2019 keeps adding nonexistent paragraph and character tags
to it. I have no choice but to use FM's dismal HTML output. I just don't
want more junk in that output.
After multiple searches, my document
Thanks, Lin, for such a succinct and clear explanation. Characters and
symbols have always been a bit troublesome for my university catalog.
Hopefully, no more. :-)
Karen Robbins
___
This message is from the Framers mailing list
Send messages
Hi Tammy,
The information* is displayed across five tabs. From left to
right, they are Overview, Category, Locus, Sequence, and Details.
* labels? titles? topics? (+ "are")
My 2¢.
Karen Robbins
___
This message is from the Framers mailing
Thanks for the tip! I'll add that approach to my notes.
Best,
Karen
On Tue, Nov 6, 2018 at 7:57 PM Monique Semp
wrote:
> I think what I've had to do is consistent with what you found, although I
> didn't have quite the same display issues as you did. But menus/displays
> weren't functional
Thanks Klaus and Mayank, I think we have solved the broken apps.
This problem didn't reveal itself when only FM11 was installed. Once we
added FM2019, a conflict arose with Windows scaling (running inside
Parallels VM). When that was reset to a resolution it could handle (instead
of my big Mac
...As a quick follow-up, installing 2019 has broken both it and 2011
versions: windows and dialogs don't render (are blank), and menus don't
stay visible when clicked (thus nothing can be selected). Not to mention
the app font has shrunk and faded so it's barely visible.
I guess the more
Hi Framers,
Is there a document or online resource about customizing FM 2019 defaults?
I am test-jumping from FM v11, so not familiar with any of the interim
interface versions. I can't abide giant/full-screen start-up screens or
galleries in apps, so just hoping to clean up what I'm forced to
Thanks all for the suggestions. Temporary manual fix in place (this is how
we get repetitive motion injuries!). After deadline I will try these &
report back.
Karen
___
This message is from the Framers mailing list
Send messages to
Hello Framers,
I want to change all instances of a phrase using one paragraph tag to
another tag. I do not want to change all instances of the phrase (it occurs
using other tags), nor replace the current tag with the new tag (both tags
remain in use). The target phrase-tag combo occurs hundreds
via its anchor to leave only the lines (and any other
garbage) selected. At that point you should be able to simply delete
them. Or you can bring the garbage objects to the front where they
can be seen and selected and deleted.
-FR
From: Karen Robbins <karendes...@gmail.com>
Sent:
appear.
>
> -FR
>
>
> --
> *From:* Framers <framers-bounces+docudoc=hotmail@lists.frameusers.com>
> on behalf of Karen Robbins <karendes...@gmail.com>
> *Sent:* Monday, August 29, 2016 5:01 PM
> *To:* framers@lists.frameusers.com
> *Subject:* [Framers] Can'
Hi framers,
In a detailed table some lines are visible in two rows (of 20+) that don't
seem to be column, row, or cell border lines. No rule above or below is set
for the nearest text. The lines do not align with the cells themselves, and
they are about the same weight as the cell borders. I
, with Central European
characters) oder the WGL4 font (includes also
Baltic, Greek and Cyrillic characters).
Pls refer to the website of a font vendor like Linotype.
Best regards -- Tino H. Haida, Berlin
Karen Robbins:
Actually, I spoke too soon. It does work for
some fonts (e.g., Garamond
trasound.com
From: Framers
[mailto:framers-bounces+acraig=bkultrasound@lists.frameusers.com]
On Behalf Of Karen Robbins
Sent: Wednesday, June 22, 2016 12:57 PM
To: framers@lists.frameusers.com
Subject: [Framers] Unusual C-Acute Accent
I am trying to keyboard an acute accent over the letter C (
Arial) and go
through the palette until you find "ç".
Alison
Technical Documentation Specialist
<mailto:acr...@bkultrasound.com>acr...@bkultrasound.com | <>bkultrasound.com
From: Framers
[mailto:framers-bounces+acraig=bkultrasound@lists.frameusers.com]
On B
I am trying to keyboard an acute accent over the letter C (as in the name
Mišić), which can be done on a Mac and in HTML but apparently not in Frame
on the PC. Alt+0263 doesn't work. A colleague with a versions-old FM quick
reference card says it confirms that couldn't be done (at least at that
Hi Framers,
My index marker text is Information and Data Management Group. Yet this
entry keeps sorting only under the letter L in the generated index. I
have double-checked to make sure that the leading i is not a lower-case
L; in fact, I retyped both the original text and the entry, and deleted
try creating a book from scratch to determine whether the
problem might be some kind of corruption in the project.
On Fri, Aug 29, 2014 at 10:54 AM, Karen Robbins karendes...@gmail.com
wrote:
Hi Framers,
My index marker text is Information and Data Management Group. Yet this
entry keeps
Hi Framers,
I'm having trouble converting my annual book to PDF. Using FM
11.0.2.384 in Windows 7. Printer is Adobe PDF.
PDF Conversion: Initial attempts to convert whole book to PDF failed.
Console error originally showed print setting for every color is
inconsistent in the TOC file and
of
this style since you selected not to remove overrides, but I think
that the one change you made is applied to all paragraphs even when
you select NOT to remove overrides.
Please guys only small flames if I'm wrong :)
Shmuel Wolfson
Technical Writer
052-763-7133
On 02-Jul-14 8:19 PM, Karen Robbins
Hi Framers,
One of our paragraph styles is a run-in heading. Mysteriously, a
default punctuation of period space has appeared in the paragraph
designer. In all other source files, we can only find the space!
Unfortunately, to remove the period requires removing all overrides,
which is
I too am so sorry to learn this. Jeremy was very generous helping me
to understand his complex but highly effective Mif2Go. I couldn't
have even attempted its use without him.
--Karen
___
You are currently subscribed to framers as
Hello Framers,
I recently updated a much-used 200+ Kb file and attempted to save as
PDF, which failed; I could see the temporary .tps file appear then
disappear. Tried printing to a .ps file, which also failed; file
generates but it contains zero kb. Tried different printers in the
print
No disclaimers apply.
DoD 358
I support http://www.TheGrotonLine.comwww.TheGrotonLine.com,
hyperlocal news for Groton MA.
On Wed, Jun 4, 2014 at 2:15 PM, Karen Robbins
mailto:karendes...@gmail.comkarendes...@gmail.com wrote:
Hello
No disclaimers apply.
DoD 358
I support http://www.thegrotonline.com/www.TheGrotonLine.com,
hyperlocal news for Groton MA.
On Wed, Jun 4, 2014 at 2:15 PM, Karen Robbins
...@mattrsullivan.comm...@mattrsullivan.com
@mattrsullivan linkedIn facebook mattrsullivan.com
On Jun 4, 2014, at 11:15 AM, Karen Robbins
mailto:karendes...@gmail.comkarendes...@gmail.com
wrote:
Hello Framers,
I recently updated a much-used 200+ Kb file and
attempted to save as PDF, which
Hi Framers,
The files in a given book have pagination set to Delete Empty Pages and
have always been set this way. Suddenly, they have changed themselves to
Make Page Count Even or in a few cases ...Odd. After I reset
pagination, often when I look at it again it's changed back to the wrong
Hi Framers,
A little fussing with the MML file itself was the answer. The MML file is
like a combination script and style sheet that converts the plain-text data
into my paragraph tag styles.
I had to enter new paragraph tag names in the MML file, making sure they
matched the paragraph tags in
Hi Framers,
I have a download (.txt file) that I regularly import into an FM
(11.0.2.384) template file using an MML script. (By template I mean a
regular .fm file that I keep to reuse for this purpose.) The text
imports as an inset with all the correct paragraph tags and styles
applied; I
At 12:33 PM -0700 5/28/14, Robert Lauriston wrote:
Maybe a different printer is selected today? Which fonts are available
can vary depending on which printer is selected in FrameMaker when you
perform an import.
On Wed, May 28, 2014 at 12:13 PM, Karen Robbins karendes...@gmail.com wrote
Lauriston wrote:
Changing the printer can cause FM to substitute fonts even if
they're installed.
On Wed, May 28, 2014 at 12:39 PM, Karen Robbins karendes...@gmail.com wrote:
At 12:33 PM -0700 5/28/14, Robert Lauriston wrote:
Maybe a different printer is selected today? Which fonts are available
Lauriston wrote:
Try selecting Adobe PDF as the printer in FrameMaker before doing the import.
On Wed, May 28, 2014 at 1:04 PM, Karen Robbins karendes...@gmail.com wrote:
Hmm... I usually work at one office but sometimes work at another (with
different printers). I've performed this task from both
: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Karen
Robbins
Sent: Tuesday, May 13, 2014 4:06 PM
To: framers@lists.frameusers.com
Subject: Can't activate FM 11...
My IT person installed a licensed copy of FM11 on my colleague's
computer. I am
wrote:
If you close and restart FM does it not display a message with the
number of days left in your trial and an option to enter a license
key?
On Tue, May 13, 2014 at 4:06 PM, Karen Robbins karendes...@gmail.com wrote:
My IT person installed a licensed copy of FM11 on my colleague's computer. I
at 9:05 AM, Karen Robbins karendes...@gmail.com wrote:
Amazingly, no it doesn't.
If it magically knows that it's under the same license as our other copies
despite the IT person's trial install, that would be fine. :-)
I will contact Adobe and see if there's a simple explanation
At 12:00 PM -0500 5/14/14, Helen Borrie wrote:
Do you not have the Activate/Deactivate options in the Help menu?
and Jeff Coatsworth wrote:
Isn't there a Help Activate/Deactivate menu item?
Nope, there isn't! Even I would have seen that ;-).
--Karen
My IT person installed a licensed copy of FM11 on my colleague's computer.
I am the keeper of license info for our unit. Since I wasn't around, he
installed as a trial version. Now we cannot figure out how to activate
it... no evidence of any screen or window in which to register, activate,
enter
Hi Wim,
In the first case (catalog), I didn't set up the files so have no idea why
that approach was taken. While the chapter start master page was built with
a disconnected chapter-head frame, only a few of the actual book (body)
chapter documents were that way--that is, all the others'
Does this mean that if the errant frame was the earliest created
(ever, if copied from a previous document? or just in this
document?), that FM encounters that frame first? Seems to contradict
the explanation at the link below (... adding a second container
would place it after the existing
The page includes one frame for the main chapter head only and one
frame--for the rest of the page--that includes paragraphs and
subsequent heads, including level 1 heads.
I suspect that an errant end-of-flow tag in the chapter head frame
may be the problem. No idea how it got there, it
that ;-).
Thanks very much,
Karen
On Mon, Mar 24, 2014 at 8:27 AM, Jeremy H. Griffith jer...@omsys.comwrote:
On Mon, 24 Mar 2014 08:08:00 -0800, Karen Robbins karendes...@gmail.com
wrote:
The page includes one frame for the main chapter head only and one
frame--for the rest of the page
the
files to remove that sort of thing.
Thanks for any insight.
Karen Robbins
Frame 11.0.1.382, Windows 7 VM in Parallels
___
You are currently subscribed to framers as arch...@mail-archive.com.
Send list messages to framers@lists.frameusers.com
Hi Rick,
I would use Photoshop. I've used both the color replacement tool and
my method below. My method is not as fast as Stuart's suggestion of
the replacement tool, but a complex subject may benefit from more
tweaking than that tool provides. Both old and new images should be
the same
Hi Rick,
I would use Photoshop. I've used both the color replacement tool and
my method below. My method is not as fast as Stuart's suggestion of
the replacement tool, but a complex subject may benefit from more
tweaking than that tool provides. Both old and new images should be
the same mode
Hi Framers,
My document previously contained two graphics, which have long since been
deleted (related text no longer exists). Yet on each open, Frame 11 looks
for them and I have to click the Ignore... button to move on. I've run a
LOR and Frame reports these graphics on a given page. I cannot
!
Roger
On 21 Oct 2013, at 20:28, Karen Robbins karendes...@gmail.com wrote:
Hi Framers,
My document previously contained two graphics, which have long since
been deleted (related text no longer exists). Yet on each open, Frame 11
looks for them and I have to click the Ignore... button
Hi Framers,
My document previously contained two graphics, which have long since been
deleted (related text no longer exists). Yet on each open, Frame 11 looks
for them and I have to click the "Ignore..." button to move on. I've run a
LOR and Frame reports these graphics on a given page. I cannot
>
> Hope this helps!
>
> Roger
>
> On 21 Oct 2013, at 20:28, Karen Robbins wrote:
>
> > Hi Framers,
> >
> > My document previously contained two graphics, which have long since
> been deleted (related text no longer exists). Yet on each open, Frame 11
>
Hi Framers,
A disconnected text frame containing a TOC-level heading appears in the TOC
under the previous chapter instead of its own. The previous chapter used to
be part of this chapter; the disconnected frame was always disconnected
from the A flow (and its heading always appeared in the
Hi Framers,
In v11, how do I remove an object style from one object? I do not want to
delete the style itself from the object catalog.
Thanks,
Karen
___
You are currently subscribed to framers as arch...@mail-archive.com.
Send list messages to
Hi Framers,
A disconnected text frame containing a TOC-level heading appears in the TOC
under the previous chapter instead of its own. The previous chapter used to
be part of this chapter; the disconnected frame was always disconnected
from the A flow (and its heading always appeared in the
Hi Framers,
In v11, how do I remove an object style from one object? I do not want to
delete the style itself from the object catalog.
Thanks,
Karen
-- next part --
An HTML attachment was scrubbed...
URL:
Karen Robbins karendes...@gmail.com wrote:
Hi framers,
How can a paragraph tag that doesn't exist get into the book HTML mapping
table?
After revising an existing book and preparing for HTML output, I
was checking
the book HTML mapping table when I noticed an entry for a paragraph tag
mber 17, 2013 at 1:39 PM Karen Robbins wrote:
> Hi framers,
>
> How can a paragraph tag that doesn't exist get into the book HTML mapping
> table?
>
> After revising an existing book and preparing for HTML output, I
>was checking
> the book HTML mapping t
Hi framers,
How can a paragraph tag that doesn't exist get into the book HTML mapping
table?
After revising an existing book and preparing for HTML output, I was
checking the book HTML mapping table when I noticed an entry for a
paragraph tag that is completely alien to anything used by our
Hi framers,
How can a paragraph tag that doesn't exist get into the book HTML mapping
table?
After revising an existing book and preparing for HTML output, I was
checking the book HTML mapping table when I noticed an entry for a
paragraph tag that is completely alien to anything used by our
Here's what may be causing my problem: The TOC reference page has default
paragraph tags for HeadingATOC, HeadingBTOC, etc. But my document
has paragraph tags of Heading1TOC, Heading2TOC, etc.
I am not sure if I created (at some point in the distant past) the TOC
paragraph tags with that naming
Simply but effective idea, Ed. Thanks!
--Karen
On Thu, Aug 29, 2013 at 11:10 AM, De Rosier, Edward
edward.deros...@anritsu.com wrote:
Hi Karen,
On this framers list, probably within the last two years, someone offered
a suggestion about those customized workspaces.
Get the FM interface
updating, why didn't this happen?
Thanks,
Karen
On Thu, Aug 29, 2013 at 10:38 AM, Stuart Rogers
srog...@phoenix-geophysics.com wrote:
On 2013-Aug-29 1:12 PM, Karen Robbins wrote:
Here's what may be causing my problem: The TOC reference page has
default paragraph tags for HeadingATOC
Here's what may be causing my problem: The TOC reference page has default
paragraph tags for HeadingATOC, HeadingBTOC, etc. But my document
has paragraph tags of Heading1TOC, Heading2TOC, etc.
I am not sure if I created (at some point in the distant past) the TOC
paragraph tags with that naming
Simply but effective idea, Ed. Thanks!
--Karen
On Thu, Aug 29, 2013 at 11:10 AM, De Rosier, Edward <
Edward.DeRosier at anritsu.com> wrote:
> Hi Karen,
>
> On this framers list, probably within the last two years, someone offered
> a suggestion about those customized workspaces.
>
> Get the FM
updating, why didn't this happen?
Thanks,
Karen
On Thu, Aug 29, 2013 at 10:38 AM, Stuart Rogers <
srogers at phoenix-geophysics.com> wrote:
> On 2013-Aug-29 1:12 PM, Karen Robbins wrote:
>
> Here's what may be causing my problem: The TOC reference page has
> defa
Hi Framers,
Forgive me if I asked this before, I can't seem to locate a solution in my
archives.
This morning I opened Frame and my docked designers/palettes have all but
disappeared.
Yesterday, Find/Change, Replace Font, Marker, Paragraph, Character, Table,
Object Properties, and a few others
Rogers
srog...@phoenix-geophysics.com wrote:
On 2013-Aug-27 2:12 PM, Karen Robbins wrote:
Hi Framers,
Forgive me if I asked this before, I can't seem to locate a solution in my
archives.
This morning I opened Frame and my docked designers/palettes have all but
disappeared.
Yesterday
Thanks for reminding me about that quirky workspaces thing.
Restoring to a saved workspace is completely unintuitive. Apparently one
must choose Reset Workspace. at which point one is presented with a scary
alert that asks if you're sure you want to reset the chosen workspace to
its original
Hi Framers,
Why does updating a book strip all formatting from existing TOC entries?
I've already imported paragraph formats to the TOC file. I haven't altered
the text of the entries or their page numbers, just applied formatting from
the paragraph designer. Clicking default font doesn't restore
Hi Framers,
Forgive me if I asked this before, I can't seem to locate a solution in my
archives.
This morning I opened Frame and my docked designers/palettes have all but
disappeared.
Yesterday, Find/Change, Replace Font, Marker, Paragraph, Character, Table,
Object Properties, and a few others
27, 2013 at 11:43 AM, Stuart Rogers <
srogers at phoenix-geophysics.com> wrote:
> On 2013-Aug-27 2:12 PM, Karen Robbins wrote:
>
> Hi Framers,
>
> Forgive me if I asked this before, I can't seem to locate a solution in my
> archives.
>
> This morning I open
Thanks for reminding me about that quirky workspaces thing.
Restoring to a saved workspace is completely unintuitive. Apparently one
must choose "Reset Workspace." at which point one is presented with a scary
alert that asks if you're sure you want to reset the chosen workspace to
its original
Hi Framers,
Why does updating a book strip all formatting from existing TOC entries?
I've already imported paragraph formats to the TOC file. I haven't altered
the text of the entries or their page numbers, just applied formatting from
the paragraph designer. Clicking "default font" doesn't
Hi Listers,
After communication with Adobe and its survey developer, the Adobe Tech
Comm survey at http://survey.douwriteright.com/
worked for me today using Mac OSX Mountain Lion and Firefox 22.
Those who've had trouble with the survey before should give it a go again!
Thanks,
Karen
Hi Listers,
After communication with Adobe and its survey developer, the Adobe Tech
Comm survey at http://survey.douwriteright.com/
worked for me today using Mac OSX Mountain Lion and Firefox 22.
Those who've had trouble with the survey before should give it a go again!
Thanks,
Karen
to tell
Adobe what you think about their licensing policies, but can't.
At 07:07 -0700 8/8/13, Karen Robbins wrote:
I had tried to take this survey in the past but it failed. This survey
still generates errors after attempting to sign up or log in, see screen
shot attached. [snipped
I had tried to take this survey in the past but it failed. This
survey still generates errors after attempting to sign up or log in,
see screen shot attached.
Thanks,
Karen
>Date: Tue, 6 Aug 2013 16:33:53 +0530
>From: Kapil Verma
>To: "framers at lists.frameusers.com"
>Subject: Your opinion
ustrating when you want to tell
Adobe what you think about their licensing policies, but can't.
>> At 07:07 -0700 8/8/13, Karen Robbins wrote:
> >> I had tried to take this survey in the past but it failed. This survey
> still generates errors after attempting to sign up or log in,
with the problem?
Thanks,
Karen
On Wed, Jul 10, 2013 at 6:41 AM, Karen Robbins karendes...@gmail.comwrote:
Is there something about Frame's HTML conversion function that won't allow
a page-break heading to be followed by a non-page-break heading? I've used
this process for several years and don't
have anything to do with the problem?
Thanks,
Karen
On Wed, Jul 10, 2013 at 6:41 AM, Karen Robbins wrote:
> Is there something about Frame's HTML conversion function that won't allow
> a page-break heading to be followed by a non-page-break heading? I've used
> this process for s
One of the files in my FM 11 book will not convert to HTML at all,
either as part of the book or as an individual file. When I open it
in a text editor, I see that the first line of the file is blank. Is
this a problem, and if so, how do I fix it? If not, what other
culprits might I look into
Is there something about Frame's HTML conversion function that won't
allow a page-break heading to be followed by a non-page-break
heading? I've used this process for several years and don't recall
this particular quirk. Macros have not been required to achieve
desired page breaks.
Here's the
One of the files in my FM 11 book will not convert to HTML at all,
either as part of the book or as an individual file. When I open it
in a text editor, I see that the first line of the file is blank. Is
this a problem, and if so, how do I fix it? If not, what other
culprits might I look into
I want to remove rogue character formats and replace them with correct
ones. I've used Character Tools to generate a list of formats by file so I
know which ones are in each document of my book. I choose Character
Format... in the Find/Change palette, type the character format name in
the entry
Thanks, Fred, maybe I was confusing format and tag. I guess I do want both
overrides and tags, though--I can use Silicon Prairie's Character Tools to
find both. As it happens, there are instances of bad practices like
Italic and italic, so case would be relevant in some instances. Thanks,
Lin, for
I want to remove rogue character formats and replace them with correct
ones. I've used Character Tools to generate a list of formats by file so I
know which ones are in each document of my book. I choose "Character
Format..." in the Find/Change palette, type the character format name in
the entry
Thanks, Fred, maybe I was confusing format and tag. I guess I do want both
overrides and tags, though--I can use Silicon Prairie's Character Tools to
find both. As it happens, there are instances of bad practices like
"Italic" and "italic", so case would be relevant in some instances. Thanks,
Lin,
Listers,
I was glad to be reminded of the advice a lister posted not long ago about
setting PDF bookmarks for a book from the save as PDF set-up dialog to
make them permanent. But it appears that (erroneous or perhaps
default/legacy) bookmarks set in some of the book's individual files are
also
Thanks, Rebecca!
All files in the book do not use all paragraph tags. Is that what you
mean by contain? Or just to check and make sure they all got
updated? :-)
--Karen
At 1:03 PM +1200 6/29/13, rebecca officer wrote:
If you open the book, select all the files in the book, and then set
the
Listers,
I was glad to be reminded of the advice a lister posted not long ago about
setting PDF bookmarks for a book from the "save as PDF" set-up dialog to
make them permanent. But it appears that (erroneous or perhaps
default/legacy) bookmarks set in some of the book's individual files are
also
Thanks, Rebecca!
All files in the book do not use all paragraph tags. Is that what you
mean by "contain"? Or just to check and make sure they all got
updated? :-)
--Karen
At 1:03 PM +1200 6/29/13, rebecca officer wrote:
>If you open the book, select all the files in the book, and then set
Stuart's suggestions didn't work for me, but Winfried's did, perfectly!
Thank you, Framers.
--Karen
On Tue, Jun 25, 2013 at 10:00 AM, Winfried Reng wrote:
As you have FrameMaker 11 you can also just open the Insets Pod and then
click on the image file and then click the dustbin icon to
Stuart's suggestions didn't work for me, but Winfried's did, perfectly!
Thank you, Framers.
--Karen
On Tue, Jun 25, 2013 at 10:00 AM, wrote:
>
> As you have FrameMaker 11 you can also just open the Insets Pod and then
> click on the image file and then click the dustbin icon to delete it. You
Hi Framers,
My FM11 file contains a graphic imported by reference that I want to remove
but cannot see. It's a big photo--I have no idea why it's suddenly
invisible. In fact, I thought it was already deleted.
By saving the .fm file as .mif and opening in a text editor, I can see the
reference to
Hi Framers,
My FM11 file contains a graphic imported by reference that I want to remove
but cannot see. It's a big photo--I have no idea why it's suddenly
"invisible". In fact, I thought it was already deleted.
By saving the .fm file as .mif and opening in a text editor, I can see the
reference
Thanks, setting pure black did the trick! Any idea why this affects only
.tif files?
--Karen
On Wed, Jun 19, 2013 at 10:00 AM, Mike Wickham wrote:
See if changing this setting helps: Right-click on your printer, choose
Printing Preferences, then Color Options tab, then Advanced Options
button.
Thanks, setting "pure black" did the trick! Any idea why this affects only
.tif files?
--Karen
On Wed, Jun 19, 2013 at 10:00 AM, Mike Wickham wrote:
See if changing this setting helps: Right-click on your printer, choose
Printing Preferences, then Color Options tab, then Advanced Options
1 - 100 of 268 matches
Mail list logo