I am running 6.0 on a little rackserver.
Alot of the time its inactive and I was
wondering about trying to setup ACPI
the main reason being to spin down the
disc / PSU so its a bit quieter (its in my
office) I would require it to wake on
LAN activity. How feasable is this
and what steps do I
G'day Ben!
On Thu, 11 May, 2006 2:45 pm, Ben Hacker Jr wrote:
I have posted my complete Kernel config file below.
I _believe_ you need include the wlan device.
Maybe I need to enable the CAM infrastructure.??
Adi Pircalabu wrote:
On Wed, 10 May 2006 08:10:34 -0400 Ben Hacker Jr wrote:
Here is output :-
rackserver# sysctl hw.acpi
hw.acpi.supported_sleep_state: S1 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 0
On 5/10/06, Philip Hallstrom [EMAIL PROTECTED] wrote:
how i can limit bandwidth when i using 'make fetch' (make install in
Ports)?
I wrote a patch to fetch awhile back that does exactly this. That was
with 4.x, but it might apply cleanly in 6. I ended up not using it, well
cause once I had
On May 10, 2006, at 11:57 PM, Questions wrote:
I just installed 6.1 on a Dell PowerEdge 1850 and the RAID adapter was
initially set for Mass Storage mode. I read that I2O mode is a better
mode, so I flipped it to I2O, and the machine booted fine. For some
reason this confuses me. I would
I'm rather tired of having to update firefox port due security fixes and
then having to build the new versions of
glib, expat, and so on an so on, every one of which complains that tere
are older versions of the lib installed.
I've tried pkg_delete -f and install of the newer version, but then
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Axel S. Gruner
Sent: Wednesday, May 10, 2006 2:46 AM
To: freebsd-questions@freebsd.org
Subject: RE: New FreeBSD Logo
Am Mittwoch, den 10.05.2006, 02:05 -0700 schrieb Ted Mittelstaedt:
My guess is it will be
Pablo Mora wrote:
how i can limit bandwidth when i using 'make fetch' (make install in
Ports)?
You can change the command-line parameters for fetch in the
/usr/ports/Mk/ somewhere (grep for FETCH).
Or you could try the 'trickle' port, which allows you to apply bandwidth
limits to more or
Howard Jones wrote:
Pablo Mora wrote:
how i can limit bandwidth when i using 'make fetch' (make install in
Ports)?
You can change the command-line parameters for fetch in the
/usr/ports/Mk/ somewhere (grep for FETCH).
Or you could try the 'trickle' port, which allows you to apply bandwidth
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of DAve
Sent: Wednesday, May 10, 2006 7:15 AM
To: freebsd-questions@freebsd.org
Subject: Re: New FreeBSD Logo
To be blunt about it, you and everyone else had their chance.
My wife, a
designer, knew FreeBSD had
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Greg Barniskis
Sent: Wednesday, May 10, 2006 8:03 AM
To: [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Subject: Re: New FreeBSD Logo
The logo issue is a horse that has been solidly beaten to death,
-Original Message-
From: Ceri Davies [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 10, 2006 10:31 AM
To: Ted Mittelstaedt; Jonathan Horne; freebsd-questions@freebsd.org
Subject: Re: New FreeBSD Logo
On 10/5/06 09:18, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
Someone already posted
Hi,
Has anyone installed Mysql 4.x or 5.x on FreeBSD 6.x in a production
environment?
Is the problem with FreeBSD threading is still exist?
(in Freebsd 4.x i used Linux threads in production and it works fine.)
Regards,
Mo
___
On Thu, May 11, 2006 at 12:23:25PM +0430, Mohamad Babaei wrote:
Has anyone installed Mysql 4.x or 5.x on FreeBSD 6.x in a production
environment?
Quite a few I think.
Is the problem with FreeBSD threading is still exist?
See these Wiki pages: http://wikitest.freebsd.org/moin.cgi/MySQL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Greg Barniskis
Sent: Wednesday, May 10, 2006 11:07 AM
To: cpghost
Cc: [EMAIL PROTECTED]; freebsd-questions@freebsd.org
Subject: Re: New FreeBSD Logo
These are indeed all perfectly valid questions. What I was
Just wondering if someone knows when 5.5-RELEASE will be out?
--
kpn @ IRCnet
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On Tue, May 09, 2006 at 05:27:40PM +0200, Florian Meister wrote:
I think it's a very nice project, but I am searching for the same in
*BSD. Is there such a project around ?
Look at FreeSBIE. This is live CD SDK.
___
freebsd-questions@freebsd.org
On Thursday 11 May 2006 00:10, you wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Greg Barniskis
Sent: Wednesday, May 10, 2006 11:07 AM
To: cpghost
Cc: [EMAIL PROTECTED]; freebsd-questions@freebsd.org
Subject: Re: New FreeBSD Logo
These
Hello,
I wait very much,too, but it is not readily released.
If there is a detailed person for circumstances in
5.5-RELEASE situation, please teach it.
Perttu Laine wrote:
Just wondering if someone knows when 5.5-RELEASE will be out?
___
I'm rather tired of having to update firefox port due security fixes and then
having to build the new versions of
glib, expat, and so on an so on, every one of which complains that tere are
older versions of the lib installed.
I've tried pkg_delete -f and install of the newer version, but then
[chaseNew.gif]
Password change required!
Dear Chase Member,
We recently have determined that different computers have logged in to
your Chase account, and multiple password failures were present before
Ted Mittelstaedt [EMAIL PROTECTED] wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Axel S. Gruner
Sent: Wednesday, May 10, 2006 2:46 AM
To: freebsd-questions@freebsd.org
Subject: RE: New FreeBSD Logo
Am Mittwoch, den 10.05.2006, 02:05 -0700
Hi,
Is it possible to attach two monitors, 2keybord and 2
mouse to one PC, by just buying some card that will
connect with a PC.
I just want to know if it is possible for me to just
buy 1 more monitor, a mouse and a keyboard
so that two students could learn in one pc. and oppen
two different
Oh my gosh,
I thought people were exagerating about the sextoy logo, but after some late
night research i found this, and was frankly disgusted.
http://www.toy-company.co.uk/index.html?target=p_1876.htmllang=en-gb
It's like Linux having a midget in a PVC Nun outfit and calling him Fux the
Dear Seller,
Check for today's new open orders on asia sourcing now and get your deals!
Buy 4-CHLORO-2,5-DIMETHOXYANILINE (1000T) from CN
http://asia-sourcing.net/bid.html?bid=161271
Buy 2,4,5-trichloroaniline (100ton) from CN
http://asia-sourcing.net/bid.html?bid=161270
Buy
I recently read an interesting comparison
on consumer and enterprise grade harddisks:
http://www.seagate.com/content/docs/pdf/whitepaper/D2c_More_than_Interface_ATA_vs_SCSI_042003.pdf
Maybe this helps.
Kind regards
Lars
___
Quoting lars [EMAIL PROTECTED]:
I recently read an interesting comparison
on consumer and enterprise grade harddisks:
http://www.seagate.com/content/docs/pdf/whitepaper/D2c_More_than_Interface_ATA_vs_SCSI_042003.pdf
This was posted yesterday in responce to my question as well. That document
Pablo Mora wrote:
how i can limit bandwidth when i using 'make fetch' (make install in Ports)?
thanks in advance.
You could use the following in your make.conf to use wget (which is
capable of limiting bandwith) in your make.conf:
FETCH_CMD=/usr/local/bin/wget --limit-rate=20k # Limits
Mark Jayson Alvarez wrote:
I've seen most people allow all outgoing traffic
originating from the firewall itself... Is this really
recommended??
No. It's highly desirable to perform egress filtering if possible, but
many people lack the time or the detailed knowledge to determine what
I tried the default ftp server with FreeBSD 5.4 and users
with no shell
accounts but it does not work.
Does anyone know of a ftp server that users would still have home
directories but no shell access /sbin/nologin and that could still
upload files to there home directories.
The
On 5/11/06, Riemer Palstra [EMAIL PROTECTED] wrote:
On Thu, May 11, 2006 at 12:23:25PM +0430, Mohamad Babaei wrote:
Has anyone installed Mysql 4.x or 5.x on FreeBSD 6.x in a production
environment?
Quite a few I think.
Is the problem with FreeBSD threading is still exist?
See these Wiki
On 11/05/2006, at 10:59 AM, Norberto Meijome wrote:
On Wed, 10 May 2006 22:45:10 +1000
Alastair Rankine [EMAIL PROTECTED] wrote:
Disabling write
caching seems to have fixed the problem.
excuse my ignorance, but where do you do this? BIOS?
Set hw.ata.wc=0 in /boot/loader.conf
See
That was IT! ! !
--
Kernel build for HACK06 completed on Thu May 11 07:54:10 EDT 2006
--
Thanks!!
Can someone add the word (-Required-) to the comments on that line
On Thursday 11 May 2006 14:54, Pietro Cerutti wrote:
On 5/11/06, Riemer Palstra [EMAIL PROTECTED] wrote:
On Thu, May 11, 2006 at 12:23:25PM +0430, Mohamad Babaei wrote:
Has anyone installed Mysql 4.x or 5.x on FreeBSD 6.x in a production
environment?
Quite a few I think.
Is the
On Thu, May 11, 2006 at 01:54:18PM +0200, Pietro Cerutti wrote:
How does one do that? I read the wiki page but didn't find any info
about how to apply the switch libpthread - libthr..
My /etc/libmap.conf looks something like this:
[mysqld]
libc_r.so.5 libthr.so.2
libc_r.so.6
On 5/11/06, Chad Leigh -- Shire.Net LLC [EMAIL PROTECTED] wrote:
On May 10, 2006, at 11:57 PM, Questions wrote:
I just installed 6.1 on a Dell PowerEdge 1850 and the RAID adapter was
initially set for Mass Storage mode. I read that I2O mode is a better
mode, so I flipped it to I2O, and the
Why, oh why, would you post this?
So help me to understand...The FreeBSD Project takes great effort in
not only producing a truly _great_ operating system, trademarked as
being fast, robust, stable and secure, provides it to the world for
_free_, but also takes on the additional chore of
On 5/11/06, Riemer Palstra [EMAIL PROTECTED] wrote:
On Thu, May 11, 2006 at 01:54:18PM +0200, Pietro Cerutti wrote:
How does one do that? I read the wiki page but didn't find any info
about how to apply the switch libpthread - libthr..
My /etc/libmap.conf looks something like this:
[mysqld]
Since it is impossible to use the report generator at the moment,
because of error: There is an error in the configuration of the
problem report form generator. Please back up one page and report
the problem to the owner of that page.
Report 84.158.9.109 is an open proxy server.
Category: misc
Bryan Curl [EMAIL PROTECTED] writes:
I humbly apologize if this is a repost. Googles Gmail has been very
unpredictable lately, so in frustration I am resending this from my ol'
faithful ISP mailbox since last nights post never seemed to make it to
the list.
I am upgrading from 6.1_RC
Ok, let's assume for now that something was wrong with the makefile or
there was a glitch in the make/install process.
(I have only updated once before so I have never had to recover from
something like this.)
Would it be ok to simply repeat the entire process, minus the cvsup part?
Is it also
Lowell Gilbert wrote:
Bryan Curl [EMAIL PROTECTED] writes:
I humbly apologize if this is a repost. Googles Gmail has been very
unpredictable lately, so in frustration I am resending this from my ol'
faithful ISP mailbox since last nights post never seemed to make it to
the list.
I am
[EMAIL PROTECTED] wrote:
[EMAIL PROTECTED] wrote on 10/05/2006 11:42:17:
hi,
On 5/9/06, Bill Moran [EMAIL PROTECTED] wrote:
Then take this to [EMAIL PROTECTED] It's just flame bait here.
I don't want a chat, I want to know where I can find out how we ended
up with such a
Ted Mittelstaedt wrote:
To those taking affront at such answers, no one is saying oh, fork
you! in some intentionally rude or belittling way (at least, I'm
not), they're saying forking (process-wise) to the appropriate forum
is the logical thing to do.
I take affront to such answers
im scratching my head here, and kicking myself for not already having a better
understanding about how things work during compile (i have 0% skill in any
programming language... except *basic*html... which dont consider worthy of
being called a skill *wink*)
my production system, was recently
On Thursday 11 May 2006 09:37, Jonathan Horne wrote:
im scratching my head here, and kicking myself for not already having a
better understanding about how things work during compile (i have 0% skill
in any programming language... except *basic*html... which dont consider
worthy of being
Jonathan Horne wrote:
well, i guess i figured it out. Makefile is not the same as previous
versions.
OPTIONS=APACHE Build Apache module off
i changed it to on, and restarted my compile. im kind of curious if this is
something that was intended, or did it slip through release
On Wed, May 10, 2006 at 04:36:15PM -0700, Timothy Beyer wrote:
I am curious if this problem has been resolved in 6.1:
(it was previously on the FreeBSD 6.1 Open Issues page, but I don't
see it there any more)
http://www.tr.freebsd.org/releases/6.1R/todo.html
swapping on 6.0 is slower
On Thu, May 11, 2006 at 05:47:07PM +0900, Kouji Ito wrote:
Hello,
I wait very much,too, but it is not readily released.
If there is a detailed person for circumstances in
5.5-RELEASE situation, please teach it.
Next week or so, now that 6.1 is out.
Kris
pgpMvT0nOLpkZ.pgp
Description: PGP
On Thursday 11 May 2006 09:55, Richard Collyer wrote:
Jonathan Horne wrote:
well, i guess i figured it out. Makefile is not the same as previous
versions.
OPTIONS=APACHE Build Apache module off
i changed it to on, and restarted my compile. im kind of curious if this
is
On Thu, May 11, 2006 at 04:20:33AM -0500, Philip Hallstrom wrote:
I'm rather tired of having to update firefox port due security fixes and
then having to build the new versions of
glib, expat, and so on an so on, every one of which complains that tere
are older versions of the lib installed.
What's the intelligent way of dealing with the problem?
(Prefferably the one which does not include downloading 600+ MB of
source
every time :-( )
portupgrade...
something close to portupgrade -rR firefox and you're done.
i usually run with a -n first to see what it wants to
Michael P. Soulier [EMAIL PROTECTED] writes:
People,
I have just set up my 5.4 box as a gateway to my DSL connection. I
used this section of the freebsd handbook.
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/pppoe.html
I enabled NAT on the PPP connection, and viola, it works.
Hey,
I've got an RTL8180 that I have compiled a module for using ndisgen. The
first time I installed FreeBSD, this worked fine, with exactly the same
version of the driver, and I was able to use it, however, the computer
power ran out during a portupgrade, rendering /usr unuseable. Now that I
Are maintenance releases of old branches always released in step with new
ones, or is it just coincidence that it's happening this way this time?
On 11/05/06, Kris Kennaway [EMAIL PROTECTED] wrote:
On Thu, May 11, 2006 at 05:47:07PM +0900, Kouji Ito wrote:
Hello,
I wait very much,too, but it
Hey,
I've got an RTL8180 that I have compiled a module for using ndisgen. The
first time I installed FreeBSD, this worked fine, with exactly the same
version of the driver, and I was able to use it, however, the computer
power ran out during a portupgrade, rendering /usr unuseable. Now that I
Dear FreeBSD Questions,
I have a not-so-new laptop that I tried to install FBSD on yesterday.
This laptop can only be made to boot from floppies (usb boot doesn't work,
no cdrom) and I happen to have some 5.3-RELEASE boot floppies laying
around.
I am successfully able to get into the installer,
On Thu, 11 May 2006 21:59:49 +1000
Alastair Rankine [EMAIL PROTECTED] wrote:
On 11/05/2006, at 10:59 AM, Norberto Meijome wrote:
On Wed, 10 May 2006 22:45:10 +1000
Alastair Rankine [EMAIL PROTECTED] wrote:
Disabling write
caching seems to have fixed the problem.
excuse my
Did you manage to solve the problem with the subject?
Just ha an almost similar problem and badly need your help??
The filesytem is ext3 and have done almost everything.
Regards,
Shepherd
___
freebsd-questions@freebsd.org mailing list
The lable doesn't exist on the mirrors anymore.
Try either to get new installdisks or go into install parameters in
sysinstall and change the lable to an existing one.
Regards,
Johan
On 5/11/06, Mike Hunter [EMAIL PROTECTED] wrote:
Dear FreeBSD Questions,
I have a not-so-new laptop that I
Kris Kennaway wrote:
Next week or so, now that 6.1 is out.
Kris
Good news for [me|us]!!
Thank you very much.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
NAOD TSIGHE wrote:
Hi,
Is it possible to attach two monitors, 2keybord and 2
mouse to one PC, by just buying some card that will
connect with a PC.
AFAIK yes, at least theorically, but I never tried this myself.
bye
av.
___
On 11/5/06 16:26, Jeff Rollin [EMAIL PROTECTED] wrote:
Are maintenance releases of old branches always released in step with new
ones, or is it just coincidence that it's happening this way this time?
It was planned this time as an experiment. The current feeling is that it
has worked quite
Seems like the easiest thing to do would be to either get some serial
consoles (or serial console emulators) or provide ssh access to the
box.
On 5/11/06, Andrea Venturoli [EMAIL PROTECTED] wrote:
NAOD TSIGHE wrote:
Hi,
Is it possible to attach two monitors, 2keybord and 2
mouse to one PC,
Frank Steinborn wrote:
Pablo Mora wrote:
how i can limit bandwidth when i using 'make fetch' (make install in Ports)?
thanks in advance.
You could use the following in your make.conf to use wget (which is
capable of limiting bandwith) in your make.conf:
FETCH_CMD=/usr/local/bin/wget
Hey all,
I have caching DNS servers running on two BSD 5.4 machines, and what
happens on both of them is that the processes will just lock up, and while
they may still answer some queries, they don't refresh or update, or
respond to proper signals.
For example:
s2# sh /etc/rc.d/named stop
On May 11, 2006, at 4:51 AM, [EMAIL PROTECTED] wrote:
Quoting lars [EMAIL PROTECTED]:
I recently read an interesting comparison
on consumer and enterprise grade harddisks:
http://www.seagate.com/content/docs/pdf/whitepaper/
D2c_More_than_Interface_ATA_vs_SCSI_042003.pdf
This was posted
Hi all...
Ok... More info for the puzzle.
I'm trying to move a file system from one disk to another, and when I do
this:
tar cf - /source/* | ( cd /destination tar xfv - )
It copies all the files, but the symbolic links are copied as files of 0
length, rather than re-established as
I've been running 6.1 RC-1 for a couple of weeks with
no problem. I've just installed a fresh copy of 6.1
roduction and when logging in as root am able to see
(.)hidden files when running the 'ls' command. Is this
normal, or is there something that I need to change to
ensuer that the (.) files
Hi all...
Ok... More info for the puzzle.
I'm trying to move a file system from one disk to another, and when I do
this:
tar cf - /source/* | ( cd /destination tar xfv - )
It copies all the files, but the symbolic links are copied as files of 0
length, rather than re-established as
Robert Davison wrote:
I've been running 6.1 RC-1 for a couple of weeks with
no problem. I've just installed a fresh copy of 6.1
roduction and when logging in as root am able to see
(.)hidden files when running the 'ls' command. Is this
normal, or is there something that I need to change to
Robert Davison [EMAIL PROTECTED] writes:
I've been running 6.1 RC-1 for a couple of weeks with
no problem. I've just installed a fresh copy of 6.1
roduction and when logging in as root am able to see
(.)hidden files when running the 'ls' command. Is this
normal, or is there something that I
Well... I'm moving it from one file system to another of different sizes,
that's the main reason.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Philip Hallstrom
Sent: Thursday, May 11, 2006 10:35 AM
To: Don O'Neil
Cc: freebsd-questions@freebsd.org
On Thu, May 11, 2006 at 06:20:30PM +0100, Robert Davison wrote:
I've been running 6.1 RC-1 for a couple of weeks with
no problem. I've just installed a fresh copy of 6.1
roduction and when logging in as root am able to see
(.)hidden files when running the 'ls' command. Is this
normal, or is
On 5/11/06, Robert Davison [EMAIL PROTECTED] wrote:
I've been running 6.1 RC-1 for a couple of weeks with
no problem. I've just installed a fresh copy of 6.1
roduction and when logging in as root am able to see
(.)hidden files when running the 'ls' command. Is this
normal, or is there something
Figure this may get more attention - LOL !!!
Message: 6
Date: Thu, 11 May 2006 07:31:50 +0100
From: Graham Bentley [EMAIL PROTECTED]
Subject: ACPI / APM Question
To: freebsd-questions@freebsd.org
Message-ID: [EMAIL PROTECTED]
Content-Type: text/plain; charset=iso-8859-1
I am running 6.0 on a
On Thu, May 11, 2006 at 04:26:04PM +0100, Jeff Rollin wrote:
Are maintenance releases of old branches always released in step with new
ones, or is it just coincidence that it's happening this way this time?
It was deliberate this time to avoid an extra ports freeze cycle,
since that has very
Hi, that is normal procedure to escape from xorg(fluxbox or kde) to a
console?, i dont mean a xconsole, i mean a normal shell console, like if
there is not xorg running
thanks
___
freebsd-questions@freebsd.org mailing list
Hi all...
Ok... More info for the puzzle.
I'm trying to move a file system from one disk to another, and when I do
this:
tar cf - /source/* | ( cd /destination tar xfv - )
It copies all the files, but the symbolic links are copied as files of 0
length, rather than
Olivier Nicole wrote:
I'm trying to move a file system from one disk to another, and when I do
this:
I think that the way to go is:
tar cf - /source/* | ( cd /destination tar xfvBp - )
Note the Bp at the end of the extract tar.
olivier
Is that for BSD tar, or gtar (GNU)? We still
Just setup an alias in your shell login file for whatever options you want
ls to use and be done with it.
Keith
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Robert Davison
Sent: Thursday, May 11, 2006 12:21 PM
To:
On Thu, 11 May 2006 11:51:19 -0600 Miguel wrote:
Hi, that is normal procedure to escape from xorg(fluxbox or kde) to
a console?, i dont mean a xconsole, i mean a normal shell console,
like if there is not xorg running
Press Ctrl+Alt+F1 buttons.
--
Best regards,
Cemasko Viktor.
On Thu, 11 May 2006, Mike Hunter wrote:
Dear FreeBSD Questions,
I have a not-so-new laptop that I tried to install FBSD on yesterday.
This laptop can only be made to boot from floppies (usb boot doesn't work,
no cdrom) and I happen to have some 5.3-RELEASE boot floppies laying
around.
I
I've tried both the BSD and GNU tars, I get the same results on both. It's
very strange.
When I add the B option, no different I used:
tar cf - /array01/* | ( cd /mnt/disk01 tar xfvBp - )
Maybe this is something specific to 4.11?
Here's what happens:
Source file:
lrwxrwxrwx1 root
Hi,
Just a quick question, do you know a port that will do about the same
thing as filemon for windows ?
Basically, just a command line tool to list all access to disk showing
1- File being access
2- Success of failure
3- Process accessing the file
Thanks a lot
I have this in the .cshrc for all the accounts I use:
alias dir ls -al \!* | more
Robert Huff
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
On Thu, 11 May 2006, NAOD TSIGHE wrote:
Hi,
Is it possible to attach two monitors, 2keybord and 2
mouse to one PC, by just buying some card that will
connect with a PC.
I just want to know if it is possible for me to just
buy 1 more monitor, a mouse and a keyboard
so that two students
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Miguel wrote:
Hi, that is normal procedure to escape from xorg(fluxbox or kde) to a
console?, i dont mean a xconsole, i mean a normal shell console, like if
there is not xorg running
thanks
___
Hello,
Can someone point me to a good on-line reference for Bourne shell
scripting? I've come across some syntax I don't understand and, since
I don't understand it, don't know how to search the web for it.
For example, what do these special variable characters do?
${UNISON_SCHED%% *} #
On Thu, May 11, 2006 at 02:16:55PM -0400, Ian Lord wrote:
Hi,
Just a quick question, do you know a port that will do about the same
thing as filemon for windows ?
Basically, just a command line tool to list all access to disk showing
1- File being access
2- Success of
On Thu, May 11, 2006 at 02:40:14PM -0500, Doug Poland wrote:
Hello,
Can someone point me to a good on-line reference for Bourne shell
scripting? I've come across some syntax I don't understand and, since
I don't understand it, don't know how to search the web for it.
For example, what do
I have mangaged to install version 6.0 and have had a bit of a play, but
not before re-installing because the boot had been so slow, I
thought I must have mucked it up!
However it was just a slow point in the boot sequence - but one which I
still can't believe is normal.
The boot
Well... I'm moving it from one file system to another of different sizes,
that's the main reason.
Dump won't care about that...
dd would, but dd isn't right for this anyway...
I'd give dump a try.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
I've tried both the BSD and GNU tars, I get the same results on both. It's
very strange.
When I add the B option, no different I used:
tar cf - /array01/* | ( cd /mnt/disk01 tar xfvBp - )
Maybe this is something specific to 4.11?
Here's what happens:
Source file:
On 5/11/06, Doug Poland [EMAIL PROTECTED] wrote:
Hello,
Can someone point me to a good on-line reference for Bourne shell
scripting? I've come across some syntax I don't understand and, since
I don't understand it, don't know how to search the web for it.
I found these in my bookmarks...
But can you do a ftp-install from an archived version? If, how?
Regards,
Johan
On 5/11/06, Andy Reitz [EMAIL PROTECTED] wrote:
On Thu, 11 May 2006, Mike Hunter wrote:
Dear FreeBSD Questions,
I have a not-so-new laptop that I tried to install FBSD on yesterday.
This laptop can only be
I will... Thanks to all for helping... Still weird what's happening though!
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Philip Hallstrom
Sent: Thursday, May 11, 2006 12:29 PM
To: Don O'Neil
Cc: freebsd-questions@freebsd.org
Subject: RE: Copying a
FYI
My Asus WL-167G wireless adapter works out of the box without any settings when
I installed FreeBSD 6.1 RELEASE. The installer recognized it and I was able to
configure it through DHCP effortlessly. Maybe it would have worked in 6.0 If I
did a fresh install or tried sysinstall.
FreeBSD
Hello...
I'm having this problem with Firefox 1.5.0.2 / Mozilla 1.7.13
I check that the links it's correct and also reinstalled linuxpluginwrapper
and copied libmap.conf to /etc.
But when I try to see a pdf file with both browsers launched from command
line, I just get this message:
Victor Lundwall wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Miguel wrote:
Hi, that is normal procedure to escape from xorg(fluxbox or kde) to a
console?, i dont mean a xconsole, i mean a normal shell console, like if
there is not xorg running
thanks
1 - 100 of 128 matches
Mail list logo
