I'm trying to tune the high side of a TXRX WP-652A duplexer. This is the
duplexer where the couplings adjustment is loosening 3 screw on the duplexer
connector and turning the assemble to adjust the reject frequency. I'm
using this on the 220 ham band, 224.84 TX, 223.24 RX.
My starting point
Does anyone know the programming scheme used in the old CW IDer, like the
CSC CWID 51B?
This uses a 32 x 2 Bipolar PROM with the ID programmed into it. I can read
the existing PROM, but can't figure out the scheme they are using. CSC has
been no help.
What's in the PROM is:
00 - 04 E8 A8 28
Hi,
Abit off topic!
I have a TARA 1000 interconnect here that i wish to use. Anyone here got any
info on this item ?
Manuals, Software ?
Any reply would be great :)
Thanks
--
[EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Those are Syntor X 9000 units - quite a different radio than a Syntor or
Syntor X.
LJ
Original Message:
-
From: Jim [EMAIL PROTECTED]
Date: Tue, 25 Nov 2003 11:16:34 -0500
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Motorola Syntor, any good?
Dexter
:
-
From: Michael Singewald N1PLH [EMAIL PROTECTED]
Date: Fri, 05 Dec 2003 14:43:29 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] UHF MSR-2000 to Ham conversion
I have seen the info on the repeater-builder site for VHF
conversions, but is there any info around
That's good to know, as I have some GE Voter copmparators and MASTR II
Voter Receivers which just came out of service that I plan to list there
very soon.
Larry
[EMAIL PROTECTED]
Original Message:
-
From: skipp025 [EMAIL PROTECTED]
Date: Fri, 19 Dec 2003 17:19:09 -
I have a 6-cavity pass/reject WACOM 2-Meter duplexer model WP-642 FS. It is
currently on 144.79/145.39 MHz.
Larry
Original Message:
-
From: kg4ogn [EMAIL PROTECTED]
Date: Sun, 21 Dec 2003 00:15:33 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] 2 Meter
I just sent them to International Crystals and told them to make them for
the new ham frequency. Never even thought about injection hi or low, and
they came back from ICM and the repeater tuned right up.
LJ
Original Message:
-
From: converbit2003 [EMAIL PROTECTED]
Date: Fri, 26
needed the new notch rods. TX-RX is familiar with the correct ones
to use, it's just that they're closed until Monday and we need the info
before then, if possible.
LJ
Original Message:
-
From: mch [EMAIL PROTECTED]
Date: Fri, 02 Jan 2004 01:23:26 -0500
To: Repeater-Builder
the original 3-1/2 long ones, so one side of the
duplexer might be able to be retuned okay.
Unfortunately, TX-RX is closed for holidays until next week. Anyone have
any info on the length that I need to use for this WP-642?
Thanks much,
Larry
[EMAIL PROTECTED
Original Message:
-
From: ac0y5 [EMAIL PROTECTED]
Date: Fri, 02 Jan 2004 16:17:20 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] DB Products Duplexer Conversion
Has anyone here ever tried the DB4048/DB4046 duplexer conversion from
DB Products, and been
the
coffers. I know that if I ever moved to California, several groups that I'd
be bringing my donations of equipment, controllers, etc. to and we'd all be
happy campers.
LJ
Original Message:
-
From: [EMAIL PROTECTED]
Date: Wed, 7 Jan 2004 00:01:56 EST
To: Repeater-Builder
I have the following Channel Elements that were pulled from some Motorola
MSR-2000 UHF Repeaters available. $15 each plus postage.
KXN1112AA 465.250 Receive
KXN1112AA 465.200 Receive
KXN1095A 460.200 Transmit
Larry
Original Message:
-
From: mch [EMAIL PROTECTED]
Date: Sun
band antennas, if they exist. Otherwise, we'll go with separate
antennas for 2M and 440 and get a M/A splitter.
Larry K7LJ
Original Message:
-
From: [EMAIL PROTECTED]
Date: Tue, 27 Jan 2004 05:39:19 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Dual Band
commercial band gear on this project.
Thanks to all for the suggestions,
Larry
Original Message:
-
From: Virden Clark Beckman [EMAIL PROTECTED]
Date: Wed, 28 Jan 2004 22:17:30 -0500
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Dual Band Antenna's
:
-
From: T.J. [EMAIL PROTECTED]
Date: Tue, 27 Jan 2004 19:26:03 -0800 (PST)
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Dual Band Antenna's?
You could try this antenna.
http://www.decibelproducts.com/productnotebookantenna2.asp?Param=ModelNumber
Model=DB314-Afreq=on We used
Does anyone have the Service Manual or Operators Manual for a Wavetek (or CT
systems) 2100 service monitor?
I have a copy of the operators manual, but I would like an original.
Let me know what you have, condition and how much.
E-mail:
[EMAIL PROTECTED]
Yahoo! Groups Links
To visit
probably arrange to take it to a copy place and have it copied.
Larry Johnson K7LJ
[EMAIL PROTECTED]
Original Message:
-
From: w5kgt [EMAIL PROTECTED]
Date: Tue, 03 Feb 2004 13:55:04 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Multi-Receiver Power
/~g4kqu/gb3dx_photos.htm
- Original Message -
From: David Schornak [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, March 15, 2004 4:25 PM
Subject: [Repeater-Builder] duplexers
has anyone or does anyone know where tofind the math formulas to help you
design a set
Found this site too:
http://www.amalgamate2000.com/radio-hobbies/radio/coaxial_resonators.htm
- Original Message -
From: David Schornak [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, March 15, 2004 4:25 PM
Subject: [Repeater-Builder] duplexers
has anyone or does
Wanted: TRN 6006A MICOR Audio/Squelch Board for a MICOR Repeater.
Larry
[EMAIL PROTECTED]
mail2web - Check your email from the web at
http://mail2web.com/ .
Yahoo! Groups Links
* To visit your group on the web, go
Message:
-
From: Steve Bosshard [EMAIL PROTECTED]
Date: Tue, 23 Mar 2004 13:16:01 -0600
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Re: [Re: [Repeater-Builder] Motorola Motrac Radio]]
Did a search on google solid state replacement tubes and Surplus Sales
of Nebraska shows
Me too...
LJ
Original Message:
-
From: Micheal Salem [EMAIL PROTECTED]
Date: Tue, 30 Mar 2004 12:11:22 -0600
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Duplexer Cable Legnth
Hi Kevin:
I get a 404 error when I tried to download the Wacom PDF document
better luck with your units.
LJ
Original Message:
-
From: Tom [EMAIL PROTECTED]
Date: Fri, 02 Apr 2004 02:28:00 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] ACC FC900
Does anyone have one in operation now?
Please email me if you do at [EMAIL PROTECTED
be reasonable expected, and more,
for not only Eric, but others who have purchased the RC-210. No flames,
just stating facts as we look at them.
Dennis W4TCL and Sonny WD4LPG
Original Message:
-
From: Ken Arck [EMAIL PROTECTED]
Date: Wed, 07 Apr 2004 08:02:51 -0700
To: Repeater
Message:
-
From: skipp025 [EMAIL PROTECTED]
Date: Thu, 08 Apr 2004 21:43:42 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] nz9e audio preamp with AGC diagram? Feb 95 QST
Has anyone got a copy of the diagram for the nz9e
audio preamp with AGC diagram? ... (from
to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
I just came up with an extra station control board, too, so I plan to
modify mine as per Kevin's article.
Larry K7LJ
Original Message:
-
From: Jim Cicirello [EMAIL PROTECTED]
Date: Sun, 18 Apr 2004 15:33:17 -0400
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder
Marv - found some here but could use a couple more. Is it KLN6210A reeds
that you're wanting to know which ones I have for trade?
Thanks
Larry
Original Message:
-
From: Marvin Hoffman [EMAIL PROTECTED]
Date: Sat, 17 Apr 2004 15:51:00 -0400
To: Repeater-Builder@yahoogroups.com
to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Marv - the KLN6210A reeds that I have several each of are:
146.2, 156.7 and 162.2 Hz. I have at least six of each tone.
Larry
Original Message:
-
From: Marvin Hoffman [EMAIL PROTECTED]
Date: Sun, 18 Apr 2004 18:59:32 -0400
To: Repeater-Builder@yahoogroups.com
Subject: Re
.
Larry K7LJ
Original Message:
-
From: n9wys [EMAIL PROTECTED]
Date: Mon, 19 Apr 2004 23:41:48 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] UHF MSR2000 tuned down to 440 MHz
Our repeater is an MSR2000 UHF model, Model # C74GBS3106BT. It was
originally
Found several, but could use one or two more. Fortunately, Dayton is soon.
Thanks,
LJ
Original Message:
-
From: robert c ehrhorn [EMAIL PROTECTED]
Date: Thu, 29 Apr 2004 18:22:52 -0700
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] WTB: KXN1052A MICOR UHF
itself or with the
loop/probe elements? Swapped any cables?
Larry K7LJ
Original Message:
-
From: Eric Lemmon [EMAIL PROTECTED]
Date: Sat, 01 May 2004 21:26:29 -0700
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] T1504 cavity
Ken,
You're right about
versions).
I also need one or two more KXN1052A UHF MICOR Transmit channel elements.
Larry
Original Message:
-
From: johnmichaelwelton [EMAIL PROTECTED]
Date: Sun, 02 May 2004 01:39:19 -
To: [EMAIL PROTECTED]
Subject: [Micor] Micor PA
Is there a way to use the Micor
or a conversion that we can all use to free up the transmit power
that's already there.
Thanks again,
Larry
Original Message:
-
From: Eric Lemmon [EMAIL PROTECTED]
Date: Thu, 06 May 2004 18:00:10 -0700
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Help
Found some, thanks. I will probably try to pick up a few more at Dayton
next weekend.
LJ
Original Message:
-
From: robert c ehrhorn [EMAIL PROTECTED]
Date: Thu, 6 May 2004 22:19:18 -0700
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] WTB: KXN1052A MICOR UHF
shipping from
Alabama.
Email [EMAIL PROTECTED]
Thanks to Kevin for the bandwidth.
Dennis/W4TCL
mail2web - Check your email from the web at
http://mail2web.com/ .
Yahoo! Groups Links
* To visit your group on the web, go
It was the same weekend it's always been since they moved it to mid May:
2004 - May 14, 15, 16
2003 - May 16, 17, 18
2002 - May 17, 18, 19
- Original Message -
From: Dave Schmidt [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, May 18, 2004 3:47 PM
Subject: Re
,
but necessary cables and connectors are no longer available from ICOM.
Good Luck!
LJ
Original Message:
-
From: Eric Struble [EMAIL PROTECTED]
Date: Thu, 20 May 2004 09:40:08 -0700
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Icom IC-RP4020 Power
Kinda like the notations I often see for the Motorola Syntor XX.
(one X too many).
LJ
Original Message:
-
From: mch [EMAIL PROTECTED]
Date: Sat, 22 May 2004 13:16:48 -0400
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] GE Mastr II
About 8 generations down
Or talking to some of the folks in 2-way radios shops down in the South
(dubya fower land) that call them MASS STAR TWO series radios.
LJ
Original Message:
-
From: mch [EMAIL PROTECTED]
Date: Sat, 22 May 2004 13:16:48 -0400
To: Repeater-Builder@yahoogroups.com
Subject: Re
I'm serious - really. I'm not that clever to have come up with something
like that - it sure surprised me the first time I heard it.
LJ
Original Message:
-
From: Fred Flowers [EMAIL PROTECTED]
Date: Sat, 22 May 2004 22:43:27 -0500
To: Repeater-Builder@yahoogroups.com
Subject
group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
If you haven't already found the info, let me know and I can arrange to
have a copy made of my ID-1A Manual at a local copy place. I also have a
couple of these ID'ers that I'll be selling at some ham swap meets.
Larry
Original Message:
-
From: lbosard [EMAIL PROTECTED]
Date: Wed
of those, but none for 100 Hz.
Larry
[EMAIL PROTECTED]
mail2web - Check your email from the web at
http://mail2web.com/ .
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group
Got some on the way now, thanks to everyone for their help!
Larry
Original Message:
-
From: skipp025 [EMAIL PROTECTED]
Date: Mon, 24 May 2004 22:53:47 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Looking for GE MVP Tone Element - 100.0 Hz
Larry
and faster to have someone just send me a check in the first place.
But if all you have is Paypal, we can use that.
Thanks,
Larry Johnson
10036 SW 50th Ave.
Portland, OR 97219-5813
[EMAIL PROTECTED]
Original Message:
-
From: Bernie F. Treat [EMAIL PROTECTED]
Date: Sun, 23 May 2004 14:52
://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
ones for almost giveaway prices (and sometimes they are actually
giving them away).
LJ
Original Message:
-
From: Ron Stordahl N5IN [EMAIL PROTECTED]
Date: Sun, 30 May 2004 17:37:45 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Wacom WP-641, correction
-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Huh??
Original Message:
-
From: Coy Hilton [EMAIL PROTECTED]
Date: Tue, 01 Jun 2004 02:26:08 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Wacom WP-641, correction on its specs...
The Duplexer will provide a specified amount of isolation. It has
for 2M, 220, 440 and
1200 MHz.
Larry K7LJ
Original Message:
-
From: Kevin Custer [EMAIL PROTECTED]
Date: Wed, 02 Jun 2004 22:21:49 -0400
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] SQ-1000 vs RLC-MOT Squelch
Hi,
The Link Comm unit is much smaller
Original Message:
-
From: Jim B. [EMAIL PROTECTED]
Date: Thu, 03 Jun 2004 10:12:51 -0400
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] buillding a repeater
[EMAIL PROTECTED] wrote:
There was a factory forced air ass'y for MICOR repeaters? (other than
if anyone has another set besides the one David needs, I could sure use
one, too. It will finish up another UHF Repeater - everything else works
fine.
LJ
Original Message:
-
From: David [EMAIL PROTECTED]
Date: Thu, 3 Jun 2004 21:41:39 -0400
To: Repeater-Builder@yahoogroups.com
:
-
From: Charles Miller [EMAIL PROTECTED]
Date: Fri, 4 Jun 2004 20:56:48 -0500
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] MSF 5000
They make very good repeaters. If the one you have is close enough to the
HAM band then you can move it without very much of a problem
another band needing filling up because
Repeaters are authorized there.
LJ
Original Message:
-
From: russ [EMAIL PROTECTED]
Date: Sun, 6 Jun 2004 16:56:04 -0400
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] East coast system?
Hey Don,
It really is not all
mail2web - Check your email from the web at
http://mail2web.com/ .
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups
://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
to
have to go through a bunch of modifications to one if I really didn't have
to. Hopefully one will turn up!
Thanks,
LJ
Original Message:
-
From: Joe Montierth [EMAIL PROTECTED]
Date: Tue, 8 Jun 2004 22:26:02 -0700 (PDT)
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater
I'd like the info, too - especially if someone has modified the 250 Watt
MICOR PA Deck to go down to the 145 MHz range.
LJ
Original Message:
-
From: Frank R. Vondra [EMAIL PROTECTED]
Date: Sat, 17 Jul 2004 18:32:41 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater
! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo
and took what I could get out of it (about 90 watts).
LJ
Original Message:
-
From: Kevin Bednar [EMAIL PROTECTED]
Date: Tue, 20 Jul 2004 22:25:57 -0400
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Micor low band base
Very good Kev. I kind of figured as much
-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
.
Larry
Original Message:
-
From: [EMAIL PROTECTED]
Date: Mon, 26 Jul 2004 14:24:06 -0700
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Need VHF LPF for Circulator
I'm looking for a VHF Low Pass Filter that goes on the output of a standard
ole Celwave or DB
up today!
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
to sign up today!
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups
:
-
From: Mike WA6ILQ [EMAIL PROTECTED]
Date: Tue, 14 Sep 2004 20:32:20 -0700
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Voters
At 05:13 PM 9/14/04, you wrote:
A while back, there was some discussion on voters. I have read through all
of that.
Have you read the two
, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Message:
-
From: Ken Arck [EMAIL PROTECTED]
Date: Sun, 19 Sep 2004 16:50:29 -0700
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Kinda of a strange question
Hi folks
Is anyone aware of the earliest use of a synthesized remote base on an
amateur repeater? One
! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
PROTECTED]
Date: Mon, 20 Sep 2004 21:33:56 -0700 (PDT)
To: [EMAIL PROTECTED], repeater-builder@yahoogroups.com
Subject: [Repeater-Builder] New Sinclair 2M Antenna Question
It sounds like you have a SRL229 antenna. That extra
cable in the mounting tube is part of the matching
network. Just push it back
mail2web - Check your email from the web at
http://mail2web.com/ .
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED
I would assume that any winter time servicing of radio equipment/antennas
requires a helicopter for transport, and some big shovels to dig down to a
building entrance door.
Great picture!
LJ
Original Message:
-
From: John W Anderson [EMAIL PROTECTED]
Date: Sat, 2 Oct 2004 23
to sign up today!
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Worked fine here, too.
LJ
Original Message:
-
From: Coy Hilton [EMAIL PROTECTED]
Date: Tue, 19 Oct 2004 00:24:29 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Clear Speech Speaker
GEE NEIL, It worked okay for me.
73
--- In Repeater-Builder
, etc. Make sure you have the service manual.
LJ
Original Message:
-
From: Kevin Bednar [EMAIL PROTECTED]
Date: Wed, 20 Oct 2004 18:32:47 -0400
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] MSR2000 Question
Anyone know what mods, if any, are needed to bring a UHF
. Contact me off the list if you're interested.
Larry
[EMAIL PROTECTED]
Original Message:
-
From: Q [EMAIL PROTECTED]
Date: Fri, 29 Oct 2004 01:17:56 -0400
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Help needed
Also,the words2meter duplexer and cheap
The duplexer is $550 plus shipping. The rods haven't been cut short, I can
send a .jpg picture via email (later this weekend after I get home and
after the CQWW DX Contest).
LJ
Original Message:
-
From: valleyforge2002 [EMAIL PROTECTED]
Date: Fri, 29 Oct 2004 09:21:11 -
/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
I'll open up the cabinet this weekend and measure them. I may try to tune
it up on 2-Meters this weekend.
LJ
Original Message:
-
From: Q [EMAIL PROTECTED]
Date: Sun, 31 Oct 2004 11:39:34 -0500
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Help needed
I just took the door off of the Sinclair Duplexer cabinet and measured the
cavities length - they're 24 long.
LJ
Original Message:
-
From: Q [EMAIL PROTECTED]
Date: Sun, 31 Oct 2004 11:39:34 -0500
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Help needed
your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
[EMAIL PROTECTED]
Date: Thu, 18 Nov 2004 16:10:39 -0800
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Micor Units
At 03:59 PM 11/18/04, you wrote:
Hello All,
I just inherited a Micor receiver, transmitter and two powersupplies from I
guy, like me, that doesn't know anything
Buy stores.
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
a good place for a low-band repeater system. Lots
more channels available.
Larry
Original Message:
-
From: jhoonbee [EMAIL PROTECTED]
Date: Tue, 30 Nov 2004 06:17:19 -
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] ten meter repeater setups
Hello
:
-
From: Jim B. [EMAIL PROTECTED]
Date: Wed, 01 Dec 2004 14:51:20 -0500
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] ten meter repeater setups
Matt wrote:
Its low in the cycle right now for sure. When things are good on 10m
there's
a new problem for you guys
with some story, like a
local group some years ago, that We can't get a MICOR PL Decoder to work
at this site. Or this repeater isn't for us, it's for the DX stations -
they really depend on it!
What a mess.
Original Message:
-
From: TGundo 2003 [EMAIL PROTECTED]
Date: Wed, 1 Dec
for
them.
LJ
Original Message:
-
From: Mike WA6ILQ [EMAIL PROTECTED]
Date: Thu, 02 Dec 2004 00:46:50 -0800
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Wanted! Motorola Mitrek (Lo-Band)Manual
#6881039E70
At 10:25 AM 12/1/04, you wrote:
I want a Mitrek
I have a Motorola VHF MSF-5000 Repeater/Base station, with the test set,
RIB and RSS, and am looking for a Service manual for the Repeater.
Yes, I know they're available from Motorola.
Yes, I know they're sometimes on ebay, but none are listed right now.
Thanks,
Larry
[EMAIL PROTECTED
Wow - that's quite a frequency spread! Continuous duty?
LJ
Original Message:
-
From: Barry Thompson [EMAIL PROTECTED]
Date: Fri, 3 Dec 2004 13:49:47 -0800 (PST)
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] MSR 2000 PA's 100 watt for uhf 400 - 599 mhz
Kenwood
- Original Message -
From: skipp025 [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, December 03, 2004 4:08 PM
Subject: [Repeater-Builder] tone trivia..?
OK Smartie Pants...
Who had Quiet Tone..?
skipp
Neil McKie [EMAIL PROTECTED] wrote
and with my 10M Motorola HT-200 handie-talkie. I'll try a different
controller one of these days and have the Remote Base up again!
Larry K7LJ
Original Message:
-
From: Rogers, Ron [EMAIL PROTECTED]
Date: Tue, 7 Dec 2004 15:54:21 -0500
To: Repeater-Builder@yahoogroups.com
Subject: RE
Kinda like some of the modern little 4-cylinder cars with wings and coffee
can mufflers, trying to look and sound fast! (always trying to get me to
race when they pull up along side of my 'Vette)
LJ
Original Message:
-
From: skipp025 [EMAIL PROTECTED]
Date: Tue, 07 Dec 2004 23
1 - 100 of 297 matches
Mail list logo
