Commented within your original message.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Jim Ruby [EMAIL PROTECTED]
To: blindhandyman@yahoogroups.com
Sent: Wednesday
I had to look up Chiggers on the Web! We don't appear to have that
particular form of nasty up here.
I wonder too at the apparent quantity of frolics down there?
Think I will stick with our bears and moose! I know how to deal with them.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED
as all
of the advertising would have us believe the driver must keep them under his
seat because it all begins from the same refinery.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message
to bring some more electricity up there, lots of people like to
run a radio shack from their attic or model trains, things like that.
Have fun!
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat
easier to move at
least some of the screws. You might want to dip the replacements in a little
oil too before putting them in although over the years it probably wouldn't
matter much.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita
the
additional insulation bats across the joists to further fill over any gaps
and further limit thermal bridging through the joists. Don't forget to leave
ventilation space at the eves so air can flow up over the underside of the
roof decking
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED
, should be reinforced across the tops
of doors to help support the weight above.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Shawn Keen [EMAIL PROTECTED
Can you make the headphone work as a mike? One should even in a stereo set.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Max Robinson [EMAIL PROTECTED
no
service costs, equipment storage, fuel purchasing and hauling and I don't
have to loose any time from my work shop. Best of all, neither do I have to
get up early or postpone supper.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita
You can tune a dish and you can tune a piano but you can't tuna fish.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Loren buntemeyer [EMAIL PROTECTED
I suppose one could instal electronic guiding wires and independent
clutching for the drive wheels and have a robotic or at least an automated
blower. Comes back to similar methods for lawn cutting.
Gas jets with electronic ignition might provide another option.
Dale Leavens, Cochrane Ontario
to pursue. If I have
already written on this subject, sorry to have done so again.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Victor Gouveia [EMAIL PROTECTED
it
seems to me that there has to be other ways besides those offered through
the set-up before software is loaded.
Some of the functions are available through other methods like the methods
for setting date and time.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
hole auger is
quite a challenge too.
It is all character building.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
To listen to the show archives go to link
http://acbradio.org/handyman.html
or
ftp
theoretically make removal more difficult. Don't know why that should matter
really but it seemed like a good idea at the time.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message
would have been fully adequate.Going
all the way through the brick and air space and on into the rim joist and
through to a floor joist, man you are running a very long bolt most of which
isn't doing anything.
That is true, when you own a home you become intimate with your iron monger.
Dale
too.
I have used both a jig saw and a router for that sort of task but prefer the
router.
I think in your situation I would first cut the plywood in half so as to
preserve the unnecessary cut.
How thick a sheet are you cutting and why that size? Inquiring minds want to
know.
Dale Leavens
Oh I understand now , I never thought of nailing sideways like that, more on
a diagonal something like toenailing. Gives a lot more meet to pound the
nails into and drives the joist tight to the rim or ledger.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come
decking boards? I am assuming two by stock, anything
thinner won't be adequate. I have seen one inch but it is inadequate and
even if permitted will prove to be unsatisfactory I am sure.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook
hardly handle the tines.
I should have a piece of perforated pipe down the middle to permit more air
into the middle of the pile it would work better.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat
The trouble with worms though is that you will want to sort them out of the
compost when it gets full. It wouldn't hurt to leave a few of them and even
some of their eggs in the applied compost most of the time I suppose but you
wouldn't want to have to start over each time.
Dale Leavens
of the windings to fail that the top speed is only a few RPM and it
hums like an entire choir that has forgotten the words.
I would dearly love to find another which would operate from a dimmer for
the infinitely variable characteristics but they seem to be unavailable.
Dale Leavens, Cochrane Ontario
I must say that I wondered about that too.
And what are the lights for on his farm? Can't the worms see where they are
going underground or maybe for tanning?
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear
but it is likely that the
thin surface will easily catch again in the recent future.
Hope this helps or at least gives you some ideas.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message
most
of the time, when I want something I want it now because by the time I get
it I want something else. Life is so much less complicated now that I have
passed the dating phase
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita
Frequently Asked Questions, New Hampshire Marble, Cultured Marble, Bathtubs,
Showerbases, Vanity tops, Sinks, Flatstock, technical informationHere is a page
with the information on drilling cultured marble and other useful facts.
New Hampshire Marble
Frequently asked questions and technical
Isn't it ironic that the authors warn you not to get it on your hands!
Just how much is in the average diet soft drink?
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message
stainless!
Hope this gives you some useful ideas.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: William Stephan [EMAIL PROTECTED]
To: blindhandyman@yahoogroups.com
, enough to be stable but not so
much that I am tripping over the ends of the legs when hurrying around the
horses.
I hope this is helpful, or at least gives you a few ideas.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype Dale
Come and meet Aurora, Nakita and Nanook at our polar bear
with a
press.
It could also be done with a regular circular saw and appropriate jigs, I
made the roof for my 12 by 16 foot shed in that way but for a single one off
table it would take about as long to create the jig to follow as to cut the
boards.
Dale Leavens, Cochrane Ontario Canada
is more
desirable, I got the table saw first and did a lot of pretty sophisticated
work with it but that miter saw is also pretty darn helpful.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat
You know, oddly enough the larger blade doesn't gain you much. I had not
known of these new belt drive machines, mine and all I have seen to date are
direct drive units.
A nice big panel saw would be a treat.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come
of blade is exposed and I trust it to stay just where it
is.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Cy Selfridge [EMAIL PROTECTED]
To: blindhandyman
both purchase prices together will probably get you the best of the
best first time out.
Have a look at
www.northerntool.com
or
www.harborfreight .com
pretty good sources in the U.S. If you get a chance please try to look at
other equipment.
Dale Leavens, Cochrane Ontario Canada
[EMAIL
All-In-One Straight Edge ClampHere is a selection of guides and accessories
which look good to me. I don't se one 8 feet long here but will keep looking.
I am thinking I might get one though for cross cutting and routing dadoes.
All-In-One Clamp
Joint'r Clamp
MORE SIMPLE WOODWORKING SOLUTIONS from
SIMP'L PRODUCTS, Inc.
. . . they work every time
Products
Where to Buy
Company
Instructions
Joint'r Clamp
MORE SIMPLE WOODWORKING SOLUTIONS from
SIMP'L PRODUCTS, Inc.
. . . they work every time
Products
Where to Buy
Company
Instructions
of sins. The other problem is where to keep an eight foot long guide when
not in use but where it is convenient and easy to get to. Nevertheless, well
worth the bother to have..
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our
.
Glad to hear it worked out well. The snugger you get the mating surfaces to
fit the better the glue joint will be.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Ralph
What tool do you intend to use to cut with? Is this sheet metal or some
composite?
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Larry Stansifer [EMAIL PROTECTED
though and the hood
won't be flat I am sure, they are usually contoured so it may be a little
difficult to track perfectly.
Hope this helps.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat
work though with the stick or rod.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Larry Stansifer [EMAIL PROTECTED]
To: blindhandyman@yahoogroups.com; blindhandyman
, that
stuff becomes inert almost immediately it touches something. Keep the pets
away for a couple of hours ant that should be fine! Keep them from drinking
it of course!
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our
: [BlindHandyMan] weed killers
Just kill the weeds around the fences
Steve Shannon
Today I marry my best friend. The one I laugh with, live for, love..
October 11, 2003
-Original Message-
From: blindhandyman@yahoogroups.com [mailto:[EMAIL PROTECTED]
On Behalf Of Dale Leavens
Sent
or 8 inches deep all around
the perimeter this will act as a barrier for lawn grasses or other adjacent
roots from transitioning. With plastic though and no light through black
plastic you should be pretty good for a very long time.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype
You might try rat traps, I don't know how effective they are but I very much
doubt your dog will get into one.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From
help here. If you work to a wet
edge you can stop and mix up more and continue so long as you have worked
the resin well into the fabric. It won't penetrate through already set resin
and you don't want voids in the finished product.
I can't think of anything more just now, hope this helps.
Dale
familiar with it
but more capable than I and will get the job done in much less time than I
would..
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Michael Baldwin
Hi Rae,
Have you used it with masonry bits? and how did it do with them?
Masonry bits are very differently shaped, no under-cut, and the carbide
tipped ones are very hard. Just curious, big masonry bits are very expensive
and they do grind badly when drilling.
Thanks.
Dale Leavens, Cochrane
and like it
well. It is a very blind friendly finish material.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Robert J. Moore [EMAIL PROTECTED]
To: blindhandyman
be a good way to set it depending on the design of the table. You
may also use the corner of the table as a pretty good guide to set it
square.
Hope this is helpful.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar
.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Dale Leavens [EMAIL PROTECTED]
To: blindhandyman@yahoogroups.com
Sent: Saturday, September 02, 2006 12:18 PM
Subject
and if in good condition you can likely bring them back.
I hope this was helpful.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Lee A. Stone [EMAIL PROTECTED
and if in good condition you can likely bring them back.
I hope this was helpful.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Lee A. Stone [EMAIL PROTECTED
Well, just how authentic it looks on scrutiny is beside the point, it fools
enough people to be worth the while of the perpetrators.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original
enabled.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: David Ferrin [EMAIL PROTECTED]
To: blindhandyman@yahoogroups.com
Sent: Sunday, September 03, 2006 11:36 AM
, a
series of pieces, 12 I think for gluing up to be turned on a lathe. This he
called a sled and specifically designed for those very precise cuts.
If you want more information or a better explanation just ask.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come
with a hand saw and chisel.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Robert J. Moore [EMAIL PROTECTED]
To: blindhandyman@yahoogroups.com
Sent: Monday, September 04
Well, can you estimate a 45 degree angle? half of that is 22.5 which is just
a little over 20, 10 degrees is about half of that.
The slope on the back of a chair to the seat is usually about 8 degrees if
done correctly and if that helps.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED
to have a link to a
site on my old dead computer but I haven't been able to locate it.
I bought mine from our local Home Hardware store, I think though it is a
uniquely Canadian chain.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita
Lee's tagline reminds me of that little question I was asked not long ago.
Did you hear about the invisible man who married the invisible woman?
The kids were nothing to look at either.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita
hand
tight should be enough, but a good hand tight. If it does leak a little you
can buy new wedge shaped rings. You need to know the size, usually inch and
a quarter but can be inch and a half or two inches.
Hope I understood you correctly.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED
So Dan,
Is there a discrete power supply or is it also integrated directly into the
main circuit board?
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Dan Rossi
of the soil,
it's density and so on, the amount of any snow cover, the direction of the
hillside and even direction of prevailing winds and weather.
My answer therefore is a very definite maybe.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita
drill doctor from Northern Tool + Equipment
Shop by Price
a.. $20 - $50 (3)
a.. $50 - $100 (1)
a.. $100 - $250 (2)
Home Search: drill doctor Drill Bit Sharpeners
6 Products Sort by:
.
This is not really a fixit question however there are a couple of hundred
blind people on this list which spreads the net fairly wide.
Thanks for your indulgence.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
[Non
big
import duty.
Now if I can find a short cruise to use up a little time while down there
after seven days both my wife and I can bring in $750 each tax free.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear
I too listened for a couple of minutes last night using my ThinkPad and
Windows XP through Winamp.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Jim Ruby [EMAIL
to form a flat spot which, i thought might grab. I
figured then if I made a second one at 90 degrees to the original then even
if the pin spun at least one would engage the lip but alas, all I managed to
do was ruin the warrantee.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype
is in the import duty. I am trying now to
locate a vendor in or around Houston where I can wander in and buy one. Even
allowing for the exchange rate I should be able to buy one for under $400
over there, I need about $600 here.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype
I didn't get the kiss my black ass reference. Catie is a blond white
woman, unless she is of mixed race and the black half is below the waist or
something.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear
.
They do make a cleaning agent as well, coloured so that building inspectors
can see that it has been used as a method of quality control in the building
industry to keep the builders honest, it isn't necessary and particularly
not for this application.
Dale Leavens, Cochrane Ontario Canada
[EMAIL
the volume.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Tom Fowle [EMAIL PROTECTED]
To: blindhandyman@yahoogroups.com
Sent: Monday, September 18, 2006 10:45 PM
Subject
He has a moderate sized pit with a few rocks around it.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Robert J. Moore [EMAIL PROTECTED]
To: blindhandyman
when the few hangers on are at too much risk of puking on your floor to
bring inside.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: John Schwery [EMAIL PROTECTED
We have already had half a dozen heavy frosts although not enough to kill my
roses yet and there are a couple of lilies still blooming in the upper
gardens. My little water feature is still tinkling on the front lawn too but
the leaves are turning and beginning to fall.
Dale Leavens
for KMS Tools is 1-800-567-8979. Thanks to K0LR for
this information.
Direct link to the NEXXTECH talking multimeter:
http://www.kmstools.com/main.php?scripts/products/cat.php?142
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook
or buck saw, even a big one will probably cost
under 20 bucks!
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: brice mijares [EMAIL PROTECTED]
To: blindhandyman
Smoke sausage?
How do you light a sausage?
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: NLG [EMAIL PROTECTED]
To: blindhandyman@yahoogroups.com
Sent: Wednesday
I did a google search and they are, as you say, very expensive.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Tom Fowle [EMAIL PROTECTED]
To: blindhandyman
with a high attrition rate.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Larry Stansifer [EMAIL PROTECTED]
To: blindhandyman@yahoogroups.com
Sent: Friday, September 29
. It wants about
three quarters of an inch into each fitting. You will need three feet and an
inch and a half to span a three foot gap between fittings to allow for that
insertion.
Hope this helps.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora
it as an aerosol
for those reasons.
I don't however have any better solution
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: William Stephan [EMAIL PROTECTED
Well Carla Jo,
I thought of Vaseline on the thumbs as they encircle the throat.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Carla Jo [EMAIL PROTECTED
or more cords
a year as do some of my friends, I would probably enjoy a much more intimate
relationship with a chain saw under those circumstances.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat
Ah!
Thank you very much. I'll have a go at that this week-end.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Mark M [EMAIL PROTECTED]
To: blindhandyman
and if you don't have air conditioning which I do not
you can operate with only two.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Lee A. Stone [EMAIL PROTECTED
to be pretty heavy.
It seems to me that blades on the left have appeared nearly over night.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Mickey Fixsen [EMAIL PROTECTED
, President
International Tool Corporation
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
[Non-text portions of this message have been removed]
To listen to the show archives go to link
http
specific data was not located.
Copyright © 1993 1998 LAF/C.R.S., Inc. All rights reserved. The previous
article, in whole or in part, appeared in the December 1993 issue of Remodeling
News.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora
will be to find and
instal a network valve arrangement so I can have a modest network but one
which doesn't all have to be pressurized when only one branch is required.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar
to get off of your
hands.
I do have some stuff they call liquid gloves from Lee Valley which is a
barrier cream, that helps a lot but you will want a cloth, cheese cloth will
do but pull away any free threads from where you cut it so they don't come
free and stick in the finish.
Dale Leavens
that you are getting coverage and if you don't, you will
be going over it with another coat anyway.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: William Stephan
inside air
and has the other advantage that it can be reversed for cooling in summer
months but that requires a little more study.
These are just a few thoughts to consider. I think we probably all would
like to save energy money. It can leave us vulnerable though to hype.
Dale Leavens
the grid can be cheaper than
burning the gas or how you can squeeze more heat out of that electricity
than the gas originally put into it. Of course my wife insists that a few
ounces of chocolate will put five pounds on her and I don't argue that so
perhaps it may be.
Dale Leavens, Cochrane
.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: William Stephan [EMAIL PROTECTED]
To: blindhandyman@yahoogroups.com
Sent: Sunday, October 15, 2006 1:17 PM
Subject: RE
mother was constantly wiping my finger prints off of dry paint, prints I
couldn't see.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Mickey Fixsen [EMAIL PROTECTED
but, with their
input I am often armed with a good starting point to find my way in my way.
That reminds me, I should drop that lady a note to see how things are
getting along, she must be an exceptional woman.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come
disposable rollers for applying contact cement and working with
fiberglass resin. Those were tips given to me by a sighted chap, it makes
laying that sticky stuff down a lot easier.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook
. It isn't always
obvious and may not be where you think.
Dale Leavens, Cochrane Ontario Canada
[EMAIL PROTECTED]
Skype DaleLeavens
Come and meet Aurora, Nakita and Nanook at our polar bear habitat.
- Original Message -
From: Tom Fowle [EMAIL PROTECTED]
To: blindhandyman@yahoogroups.com
1 - 100 of 1865 matches
Mail list logo
