Hi Leon and all,
I am new to PXE. If you have some good input for PXE, please add your
remarks in the wiki page so we could document the knowledge there.
I would like to take this opportunity to thank Assaf Gordon for adding
PXE guide in wiki. Its quality and comprehensiveness allows to me
Leon, the mailing list problem is fixed. Thank you for the notice. - Punky
Leon Woestenberg wrote:
Also, there is a bug on this page:
http://voyage.hk/mailing-list/
Hover over the link in To post a message, send mail to
voyage-linux@list.voyage.hk mailto:[EMAIL PROTECTED]
and you will
Hi Greg,
I believe you are using wrap? So which kernel you has been using that
lm sensors works. Which related modules in your old kernel works? And
which part of lm senors not work? I am getting no idea.
- Punky
Greg wrote:
Hello
I recently upgraded to unstable with 2.6.15 kernel
. In some newer voyage releases, you will have the follow lines
in /etc/modules if you select WRAP option in voyage.update:
lm77
scx200_acb base=0x820,0
As you are upgrading and not a fresh install, you may not have these
line. But I don't know if this matters, just in case...
- Punky
Kim-man
Hi Kay,
As far as I know, the ipsec pom patch doesn't patch or compile
successfully on 2.6.15. Moreover, rebuild iptables package is a hurdle
for me actually.
To include IPSEC, kame and raccoon support, if you have the following, I
can help to provide it in later voyage.
- ipsec kernel
Hi Leon and all,
Thank you for your hard work in exploring PXE/NFS for voyage all over
the weekend. Your work sounds impressive. Please keep up.
May I further know what you are able to do after PXE boot and NFS
mount? I am going to do the same thing to provide a VMWare image for
PXE boot
Hi Edwin,
You cannot bridge AP (master mode) device with STA (managed mode)
device. Only AP support bridging - and WDS as well. This is a well
known problem. See FAQ:
http://wiki.voyage.hk/dokuwiki/doku.php?id=why_can_t_bridge_wireless_interface_in_managed_mode
You can find some
aware, etc. I would help and is willing to include those nice
feature in voyage.
Let's share your thought.
Punky
Rasjid Wilcox wrote:
On 3/22/06, Kim-man Punky TSE [EMAIL PROTECTED] wrote:
Rasjid, feel free to update the wiki.
Done. See
http://wiki.voyage.hk/dokuwiki/doku.php?id
Hi all,
Over the last two weeks, I have received a lot of mirror requests. You
can download Voyage Linux from any of our mirrors.
==
Master Mirror:
mirror.voyage.hk(Mike O'Connor - also serve au.voyage.hk)
Primary Mirror - by
for my iBook 2001.
- Punky
P.S. : 0.2 release is very close.
Kim-man Punky TSE wrote:
Hi Keith and all,
Over the weekend I have tried the hostapd (0.3.7 and 0.5.0-2) for
WPA-PSK and it seems not working properly. I used old iBook (i.e. 2001
version) with 11b Airport. I have been using
Hi Frank,
I have overwritten existing 2.0-10 kernel and modules last night but
Package.gz is generated at 7:00am HKT. Please try again.
Regards,
Punky
Frank Phillips wrote:
Hi all, the latest 2.6.15 kernel package is a bit bigger than what's
quoted in the packages file, so apt-get upgrade
questions feel free and ask.
Mit freundlichen Grüßen
Hermann Hofer
---
AHS Netzwerktechnik GmbH
-Ursprüngliche Nachricht-
Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Im Auftrag von Kim-man Punky
TSE
Gesendet: Montag, 24. April 2006 03:24
An: [EMAIL PROTECTED]; [EMAIL PROTECTED
this modules I will send you the needed kernel options
later.
Thanks
Hermann
---
AHS Netzwerktechnik GmbH
-Ursprüngliche Nachricht-
Von: Kim-man Punky TSE [mailto:[EMAIL PROTECTED]
Gesendet: Montag, 24. April 2006 11:02
An: Hofer, Hermann
Cc: [EMAIL PROTECTED]
Betreff: Re: AW
Hi Gleen,
use iptables-save to dump the rules to a file then use iptables-restore
to load it on boot.
Punky
Glenn Swonk wrote:
I can't seem to find where to place any custom iptables rules.
Where would be the most appropriate place?
thanks,
glenn
--
G Swonk a t gmail dot Com
Edwin,
What chipset it is used?
Edwin Whitelaw wrote:
Does anyone know of any successful effort to port Voyage (or something
similar) to the Senao/Engenius CB3+Deluxe? It's an excellent package
but would be much better with Linux on it. :-)
Edwin
--
Regards,
Punky
P U N K N ! X . c o
Hi,
One Prism 2.5 and one Atheros interface, both runs in master mode and
need WPA support? You need to run two hostapd instances by supplying
different hostapd.conf for each interface.
Punky
Keith Cheung wrote:
Hi Punky,
I have encountered problem when running hostapd on Prism wireless
Hi Simon,
voyage 0.2 uses debian kernel 2.6.15-8.
See change log:
http://cvs.voyage.hk/cgi-bin/viewcvs.cgi/voyage-install/CHANGELOG?rev=1.16
The debian kernel source:
http://debian.cn99.com/debian/pool/main/l/linux-2.6/linux-source-2.6.15_2.6.15-8_all.deb
Regards,
Punky
Simon Blake
Hi Cool,
The ubuntu-based 2.6.15_3.0-1 voyage kernel include the bcm43xx driver
for your need, but it looks like master (ap) mode is not supported.
I have searched the web a while, and found that only the devicescape
driver (bcm43xx_d80211) supports it. If anyone are able to provide the
Hi Nick,
I intend not to include pcmica wireled network support as to minimize
the kernel image size. Let me know what wired pcmcia card you are using
and I will include in the next kernel update and voyage release.
- Punky
Nick Rout wrote:
First off I am very grateful for voyage, I was
ENCC 990010759-001A
MANFID=00a4,0002
FUNCID=6
voyage:~# cardctl ident 0
product info: IBM Corp., Ethernet, 0934214, PC-NIC ENCC
990010759-001A
manfid: 0x00a4, 0x0002
function: 6 (network)
On Sun, May 14, 2006 8:20 pm, Kim-man \Punky\ TSE wrote:
Hi Nick,
I intend not to include pcmica
Hi Nuno,
Did you just update the kernel to the experimental voyage 0.3 kernel,
reboot and the following problem occurs? What version is the base
installation of voyage you upgrade from? Did you add other packages to
the standard voyage?
From the syslog, I think you could still be able to
pebble when I installed voyage, so I can't. But I know that it
was pcnet_cs.
I've run that card on a few distros since I've had it, always the same
module.
On Mon, 15 May 2006 00:57:24 +0800
Kim-man \Punky\ TSE wrote:
Hi Nick,
If you still have the pebble, can you run lsmod to see what
Hi Michael,
1) Unfortunately, there is no way to set the target root device in the
voyage.update. You will need to fix it manually
## Put your CF back to knoppix
mount /dev/CF device on knoppix /mnt/cf
vi /mnt/cf/etc/lilo.conf # and change root= line from hda to hdb
chroot /mnt/cf lilo
Hi Danny,
See this thread, just talk about it yesterday. ;-)
http://list.voyage.hk/pipermail/voyage-linux/2006-May/000898.html
But I am not sure you can boot from USB successfully. If you have
successful experience on boot voyage from USB, please share with us.
- Punky
Danny Adair
Hi Rey,
voyage:~# dpkg-query --show | egrep ppp|mgetty
ppp 2.4.3-20050321+2
pppconfig 2.3.11
pppoe 3.5-4
pppoeconf 1.7
You will need to apt-get mgetty.
I think you are the first one to run dialin/dialout server. I am not
sure the voyage kernel have the proper kernel module
Hi Danny,
Me again. For future development, I would like to go for initrd route.
initrd provides the opportunities for building voyage-native CD as well
as USB image. Let me know if you are interested to test it. I will let
you know when it is really.
If you have any pointers for how to
. So I'll try something in the middle tomorrow.
If anyone has a somewhat detailed spec on what a dev system would look like
that'd run this voyage kernel build well, let me know.
Thanks.
- Michael
-Original Message-
From: Kim-man Punky TSE [mailto:[EMAIL PROTECTED]
Sent: Friday, May 19
Hi Damini,
1) You need to recompile the kernel, see wiki:
http://wiki.voyage.hk/dokuwiki/doku.php?id=voyage_kernel
2) Even if you can compile a 64-bit kernel, I am not sure if you can mix
64-bit (amd64) kernel with 32bit (ia32 / x86) executables in voyage.
Anyone has experience with it
Hi all,
I also noticed that pcmcia-cs was depreciated before 0.2 is released.
For newer 2.6 kernel, a new pcmcia util is needed. I think I would need
to move to Debian testing (etch) to minimize work on backporting the
packages. This will automatically add udev support as well.
Punky
Grollman wrote:
Is moving this to etch a major task? Sure kicked me around a little.
- Michael
-Original Message-
From: Kim-man Punky TSE [mailto:[EMAIL PROTECTED] Sent: Sunday,
May 28, 2006 7:54 PM
To: Michael Grollman
Cc: 'Nick Rout'; [EMAIL PROTECTED]
Subject: Re: [Voyage-linux] pcmcia
Hi Pablo,
Voyage 0.2 development has been stopped. All development work goes to 0.3.
Unfortunately, I am in the middle in preparing an etch version of
voyage. Before etch-based voyage comes out, I may still build a
sarge-based voyage in form of voyage-current.tar.gz.
No need to use 0.4.9.
Hi all,
I have fixed the autologin problem and reduce the size to 30MB. The
original iso image is replaced with a new one.
- Punky
Kim-man 'Punky' TSE wrote:
Hi all,
I have been silent for a week (no kernel and package development) as I
am experimenting a brand new voyage live CD which
Hi Damini,
After 0.2, I have removed those old kernels and only retain the kernels
released in voyage distro (pre- or official release).
You will need to get the debian kernel from archive:
http://snapshot.debian.net/archive/2006/01/05/debian/pool/main/l/linux-2.6/
iso? Linuxiso.com has a debian link but found out in the middle of the install that its 2.4 based.
Can a Voyage linux distro for the wrap be downgraded to 2.6.11 and if so, how?
Thanks alot for the quick answer.
Robbie
From: Kim-man 'Punky' TSE [mailto
you need to run with ndiswrapper?
- Punky
Solomon Asare wrote:
Hi,
I tried to apt-get ndiswrapper-utils, but it failed. I
have been able to get my hardware working on
ubuntu-badger.
Thanks.
--- Kim-man 'Punky' TSE [EMAIL PROTECTED] wrote:
Hi Solomon,
Look at http://www.voyage.hk/dists
You will need to rebuild the kernel source.
Find the document here:
http://wiki.voyage.hk/dokuwiki/doku.php?id=voyage_kernel
Please subscribe to voyage-linux mailing list for community support.
___
Voyage-linux mailing list
Not in this few days. See my posting later today.
Pascal de Bruijn wrote:
Well there be a tarball like the ISO, soon?
Regards,
Pascal de Bruijn
On Mon, 2006-07-17 at 15:57 +0800, Kim-man 'Punky' TSE wrote:
No, not the same. But you may check, the kernel may support it.
Pascal de Bruijn
Hi all,
After the WorldCup and the completion of my part time project and
studies, I now put my effort back to 0.3 development. In these few
days, something will happen to voyage unstable repository and the
existing voyage-current.tar.gz as I will promote the current/unstable
to Debian
Hi Drew,
1. Did you select Wrap option when you install from voyage.update?
If so wd1100 will be load on startup
2. Does watchdog daemon started properly?
3. Or when the watchdog driver is loaded, it just reboots itself?
4. Ask mikrotik which watchdog driver should be used on linux.
- Punky
Hi all,
voyage-current is now with 2.6.17 kernel. voyage-current.old.tar.gz
removed.
- Punky
Kim-man 'Punky' TSE wrote:
Forgot one thing. It now comes with madwifi-ng 0.9.2 (r1697) module
and tools.
Kim-man 'Punky' TSE wrote:
Hi all,
After sorting out all the personal affairs, I have
'Punky' TSE wrote:
Hi all,
voyage-current is now with 2.6.17 kernel. voyage-current.old.tar.gz
removed.
- Punky
Kim-man 'Punky' TSE wrote:
Forgot one thing. It now comes with madwifi-ng 0.9.2 (r1697) module
and tools.
Kim-man 'Punky' TSE wrote:
--
Regards,
Punky
P U N K N ! X . c
Daily Live CD is now available in:
http://www.voyage.hk/download/ISO/voyage-current.iso
Next, the live-cd will be able to run as PXE boot server. NFS + pxeboot
issue will be resolved in one shot.
- Punky
Kim-man 'Punky' TSE wrote:
Daily build is now in place.
Next, it will be daily
Hi Cool,
Show me a clear instructions and I will do it for your favour.
Like openswan support, Hermann worked with me closely to get openswan
userland and module in voyage.
But I had tested wondershaper in voyage-0.2. And it worked as expected.
- Punky
Cool/Explosion wrote:
Hi,
I have a
to hear your comment.
- Punky
Kim-man 'Punky' TSE wrote:
Daily Live CD is now available in:
http://www.voyage.hk/download/ISO/voyage-current.iso
Next, the live-cd will be able to run as PXE boot server. NFS +
pxeboot issue will be resolved in one shot.
- Punky
Kim-man 'Punky' TSE wrote
wrote:
Hello Punky,
I'm not sure that wondershaper is able to provide the same
'important' thing like IMQ i.e. ingress shaping or shaping over
multiple interfaces with one qdisc
Take a look at short FAQ here http://www.linuximq.net/faq.html
Thanx in advance for that too
bye
PAT
Kim-man 'Punky
Hi Dave,
Default root password is voyage.
Dave Espinoza wrote:
Hi,
I'm trying to install voyage-0.2 in a CF Kingston 128MB using a card
reader D-Link (DUB-CR100 USB2.0 7 in 1) but appears the following
messages:
Message
From: Kim-man 'Punky' TSE [EMAIL PROTECTED]
To: Solomon Asare [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Saturday, September 9, 2006 4:36:38 AM
Subject: [Voyage-linux] Re: Voyage-Current Installation Problems
Hi Solomon,
You will need to go through steps 1-6 in
./usr/local/sbin
work on Voyage 2.0, 70 days uptime, no Issues.
- Original Message
From: Kim-man 'Punky' TSE [EMAIL PROTECTED]
To: Solomon Asare [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Saturday, September 9, 2006 4:36:38 AM
Subject: [Voyage-linux] Re: Voyage-Current Installation Problems
Hi
Hi Cool,
grub has changed the file location from /lib/grub to /usr/lib/grub. In
your version, please modify /lib/grub/i386-pc/ to
/usr/lib/grub/i386-pc/ in /usr/local/sbin/copyfiles.sh
I will update copyfiles script accordingly which will appears in daily
build next morning (HKT).
-
I noticed this bug in /etc/init.d/voyage-util for a long long time. It
is needed to find way to get around this by:
* /etc/init.d/voyage-util can only be run by init; or
* disable running of /etc/init.d/voyage-util by post-inst script in
voyage-util package.
Any idea?
Punky
n
This should be fixed in the latest voyage-current build.
Punky
Kim-man 'Punky' TSE wrote:
I noticed this bug in /etc/init.d/voyage-util for a long long time.
It is needed to find way to get around this by:
* /etc/init.d/voyage-util can only be run by init; or
* disable running of /etc
:-(
Wayne
- Original Message - From: Kim-man 'Punky' TSE
[EMAIL PROTECTED]
To: Cool/Explosion [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Wednesday, September 06, 2006 2:32 AM
Subject: Re: [Voyage-linux] IMQ - to kernel iptables
Hi Cool,
If you really care to have IMQ in voyage
Hi Cool,
voyage.update (copyfiles.sh) should be fixed in the latest voyage-current.
Please try again, although I did not test it. ;-)
Punky
Cool/Explosion wrote:
Hi Punky,
was anybody test install with argument Console Interface??? When i
try install it on router, everything is OK, but i
Hi Cool,
I have been evaluating the possibility of patching the iptables in
voyage. The way to make a custom iptables included in voyage is far
difficult than you could imagine. It is because iptables in voyage is
from debian package. If you completely replace the whole iptables
stuff,
Hi Nicholas,
What is /etc/network/run before and after you apt-get install openvpn?
Punky
n schembr wrote:
Hello,
I just install openvpn on voyage current and after the reboot networking was not working.
I tracked it to a link in /etc/network/ run - /dev/shm/network
I was able to correct
Hi,
Please read the wiki for how to compile the kernel:
http://wiki.voyage.hk/dokuwiki/doku.php?id=voyage_kernel
Use http://www.voyage.hk/dists/0.2 apt repository and
kernel-source-2.6.15-voyage
If you have succeed, please also send further information on how to get
it done so that I can
It should have some QoS and bonding module in 2.6.17-voyage kernel.
the source can be found in http://www.voyage.hk/dists/experimental/linux/
Regards,
Punky
Mächler Silvan wrote:
Hi
I'm using the voyage-current version and want to compile in some addtitional
modules for QoS and bonding of
Hi Nicholas,
You don't need to build voyage-current. Instead, use the customization
framework to customized the voyage distro.
The documentation on how to build the new voyage will be provided later
when the voyage-0.3pre1 is released.
You can use the voyage-current.iso to run it inside
The first preview release (voyage-0.3pre1) of Voyage Linux 0.3 is now
available in the following location.
http://www.voyage.hk/download/voyage/voyage-0.3pre1.tar.bz2
README:
http://cvs.voyage.hk/cgi-bin/viewcvs.cgi/voyage-custom/src/stage1/overlay_fs/README?rev=1.2
For more information about
Hi Edwin,
This is the udev bug I discovered last night. Use the following hack:
sed -i -e s/ath/Ath/ /etc/udev/rules.d/z45_persistent-net-generator.rules
and remove /etc/udev/z25_persistent-net.rules, reboot
Please test with the latest voyage-current and voyage-0.3pre1 just released.
Hi Cool,
Currently, there is no ipv6 netfilter modules compiled. Removing ipv6
iptables core make sense.
- Punky
Cool/Explosion wrote:
Hi Punky,
why you remove IPv6 Tables?
Kim-man Punky TSE napsal(a):
...
==
Removed drivers.
...
Netfilter
Hi Michael,
In the latest version of voyage (after 0.2) I have changed the default
DNS to opendns:
edit /etc/resolv.conf
nameserver 208.67.222.222
nameserver 208.67.222.220
Michael Müller wrote:
Hi Guys,
I´d like to connect to the Internet with my WRAP box trough my (sorry)
Windows
.3pre1?
-Ursprüngliche Nachricht-
Von: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
k] Im Auftrag von Kim-man Punky TSE
Gesendet: Sonntag, 26. November 2006 15:31
An: Michael Müller
Cc: [EMAIL PROTECTED]
Betreff: Re: [Voyage-linux] Problems with overwritten resolv.conf
Hi Michael
Hi Jerry,
This is the known problem in voyage-0.3pre1 as well. The problem lies
on both elvis-tiny and ed. The workaround is downloading the deb package
from
http://ftp.debian.org/debian/pool/main/e/ed/ed_0.2-20_i386.deb
and explicity run dpkg -i ed_0.2-20_i386.deb.
But I think you
/serial_cs.ko
FS
./kernel/fs/exportfs/exportfs.ko
./kernel/fs/nfsd/nfsd.ko
Regards,
Punky
Kim-man Punky TSE wrote:
Hi guys,
These days I have been removing some un-useless kernel modules in
2.6.17_3.0-1 as to reduce disk space in the distro. So
Hi Jeffery:
pre-up line should be removed.
Regards,
Punky
[EMAIL PROTECTED] wrote:
Voyage team,
My name is Jeff Rager. I am trying to bring up a dual radio AP
using Voyage .3pre1. I have not gotten any errors while configuring
ath0 for master mode but, there's nothing there when I
Hi Jeffery,
I just got a 0.3pre1 running on WRAP board. I just remove some of the #
in the lines. and here is my config.
auto ath0
iface ath0 inet static
address 10.1.20.1
netmask 255.255.255.0
broadcast 10.1.20.255
##pre-up wlanconfig ath create wlandev wifi1
Hi Mike,
Just add:
usbserial product=0x vendor=0x
to /etc/modules.
Michael Müller wrote:
Hi,
I´m relatively new to linux und very new to the WRAP box.
I have a USB device attached to the WRAP box which can be started by:
modprobe usbserial product=0x vendor=0x
Hi guys,
There is a know problem in 0.3pre1 for setting up ed, elvis-tiny and
nano through apt-get. Those package should be removed by this:
cd /var/lib/dpkg/info/
mv ed.postinst ed.postinst.bak
mv elvis-tiny.postinst elvis-tiny.postinst.bak
mv nano.postinst nano.postinst.bak
mv nano.prerm
Hi Jerry,
Please find my response for the removing ed/elvis-tiny/nano through
apt-get.
On important thing you need to know is that ethereal is now called
wireshark, the console one is called tshark. See
http://packages.debian.org/testing/net/ethereal
wlanmode ap channel 5
bud it doesn't work, than i must give parametr to CRON, but it isn't
the best way...
Kim-man Punky TSE napsal(a):
Hi Jeffery,
I just got a 0.3pre1 running on WRAP board. I just remove some of
the # in the lines. and here is my config.
auto ath0
iface ath0 inet
Hi Fred,
I have the latest voyage-current running and don't have problem
installing olsrd. openssl is installed properly.
For the temperature sensors, you may unload the modules and reload it:
modprobe -r lm77 acx200_acx
modprobe acx200_acx base=0x810,0x820
modprobe lm77
The
Hi Jean-Francois,
This is added in current daily build of live cd. Thank you.
Regards,
Punky
Jean-Francois Lalande wrote:
Hi,
it seems that bzip2 is not installed on the installation CD of voyage.
It's a bit hard to uncompress the current .tar.bz2 archive of voyage...
Thanks,
The Voyage Linux 0.3pre2 preview release is now available in the
following location:
http://www.voyage.hk/download/voyage/voyage-0.3pre2.tar.bz2
README:
http://cvs.voyage.hk/cgi-bin/viewcvs.cgi/voyage-custom/src/stage1/overlay_fs/README?rev=1.4
For more information about Voyage Linux, please
Hi Robin,
I have encountered the same before 0.2 was released. You may need to
make hostapd to use the EAP_VERSION=1. And the stock voyage-0.2 is able
to support it. Please read the following thread for this issue.
http://www.mail-archive.com/voyage-linux@list.voyage.hk/msg00504.html
thoughts - or should I just bite the bullet and upgrade to
0.3pre2? If so, what issues are there I should look out for? (But as it's
gone 2am here, I'm going to bed now...)
Regards and thanks
Robin
Kim-man 'Punky' Tse said:
Hi Robin,
I recalled it worked on voyage 0.2 and hostapd 0.5.2-1
Edwin,
OK accepted iperf and iptraf, as they are handy and don't have much size
impact to voyage. Will appear in next daily voyage-current and live-cd
build.
For vi alternative, elvis-tiny is still preferred because of the size
concern. Can you state your reason why vim-tiny is preferred?
will test and fix it b/4 you go to
town with 0.3.
Thanks.
solomon.
--- Kim-man 'Punky' TSE [EMAIL PROTECTED] wrote:
Hi Solomon,
Spending just 10 min, your work has been accepted
and will be included
in the voyage-0.3. Unfortunately, tcpdump and
sqlite contribute 1 MB.
Right now
Hi Jeff,
Don't get me wrong. my config supplied work because 192.168.1.1 is my
WRT54g router, which connnect to the outside world and supplied the dhcp
leases. Hence my wireless client runs on192.168.1.0/24 network.
So I think the question may be dhcp lease or network configuration.
See my in-line response below
n schembr wrote:
I love using voyage. I have been running voyage on small systems for the last year, 240 days uptime. I now have an application that need more hardware. I'm running a stack debian system and most of the hardware is supported.
I'm just starting
Hi,
Do you have the firmware installed in the proper location? Voyage don't
ship will the Intel firmware anymore, as there is a distribution license
issue with Intel.
Regards,
Punky
Müller Michael wrote:
Hi guys,
I'm trying to configure an Intel Pro WLAN Card but it fails while loading
Hi Chris,
I think you need a Debian system to build your own package. Then
download the .bin file from Sun's site manually and create your own deb
package using fakeroot make-jpkg .bin file.
http://www.debianhelp.co.uk/debianjava.htm
May be your chance is to get the pre-built deb
Hi Clint,
The latest customization framework from CVS could be found in nightly
directly.
http://www.voyage.hk/download/nightly/voyage-custom/
The script from 0.2 is too old indeed.
Regards,
Punky
Clint Miller wrote:
Sorry for the noise. I just took the script from 0.2 and seasoned to
Change the deb repository to your country mirror in /etc/apt/sources.list
Müller Michael wrote:
Hi,
I have a newly installed wrap box and would like to do a apt-get update. But
apt cannot connect to the servers ftp.hk.debian.org. The Servers also cannot be
pinged.
Do I have to change to
If you build your own (newer) kernel in your own way you will also need
to build the external modules (madwifi-ng) by yourself.
Regards,
Punky
Michael Müller wrote:
Hi,
I downloaded the sources of the Voyage Kernel to modify the module
support for USB Soundcards.
After that I did make
Hi all,
The second development milestone for Live CD has been completed. PXE
boot environment now supports automatic install of Voyage Linux to wrap,
soekris and generic PC.
You can download Voyage Linux Live CD at:
http://www.voyage.hk/download/ISO/voyage-current.iso
Live CD install
suggest customization, where are obvious places I
can cut?
Thanks, I really want to get Voyage working on my soekris.
||
On 2/4/07, *Kim-man 'Punky' TSE* [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
Yes, starting from 0.3 and live CD, it requires 128MB now.
Regards,
Punky
Hi Edwin and Andrew,
If you guys can patch the voyage.update or the associated scripts to
support for image dump, I would be deeply appreciated.
- Punky
Edwin Whitelaw wrote:
If you've loaded the customized image onto a bootable CF, you can put
the CF back in your reader and run:
Assuming
Hi all,
Happy Lunar New Year to all of you! Last night I have tried a new
installation method using extlinux from Live CD. Using this method,
1. You will have a read-only squashfs root filesystem on a CF that
consumes just 36MB.
2. You cannot modify the rootfs
3. By default, all changes
Hi all,
Not sure why the text does not align correctly, please refer to the Live
CD Readme instead:
http://cvs.voyage.hk/cgi-bin/viewcvs.cgi/*checkout*/voyage-custom/src/live-cd/overlay_fs/README.live-cd
Regards,
Punky
Kim-man 'Punky' TSE wrote:
Hi all,
Happy Lunar New Year to all of you
Hi Veli-Matti,
May be the serial port setting you choose is not correct when running
voyage.update?
Regards,
Punky
Veli-Matti Riepula wrote:
Hi,
I'm trying to install Voyage on WRAP.2E board but can't seem to get it to
boot properly. Maybe I've missed something obvious...
I've installed
Hi Veli-Matti,
No idea. It didn't happen to me before. If WRAP BIOS is 38400, then
when running voyage.update you set 38400, everything should be fine.
Options are:
1) reinstall again
2) use voyage-current
3) check /etc/inittab and /boot/grub/menu.lst in CF.
What Linux distro do you run
Hi all,
Let's move forward. I decided not to wait for Debian Etch and release
0.3 right away. Hence, 0.3 will be released and declared as stable in a
day or two. Actually, I can release now, but I would still like run some
regression if time allows.
When it is released, you will see
Hi Roberto,
There will be no customization framework in 0.3 distro. You can
download from the nightly code.
http://www.voyage.hk/download/nightly/voyage-custom/
Please also subscribe to voyage-linux mailing list (see
http://list.voyage.hk/mailman/listinfo/voyage-linux)
Regards,
Punky
have the right stuff. :-)
Edwin
Kim-man 'Punky' TSE wrote:
Hi Edwin,
nano/ed issue should be resolved. I will run apt-get update and
apt-get install some package again to verify. readline error
during package installation because dialog is not installed.
- Punky
Edwin Whitelaw wrote
there is another resolv.conf.
More specifically there is the resolv.conf that was available
in my PC.
Hope that I was able to explain my situation
- Original Message -
From: Kim-man \Punky\ TSE [EMAIL PROTECTED]
To: roberto riggio [EMAIL PROTECTED]
Cc: voyage-linux [EMAIL PROTECTED]
Sent
configuration:
overlay_fs
--ro
--etc
--resolv.conf
but still the final distro contains the wrong resolv.conf.
Yes my PC gets autmatically the DNS using dhcp. But in the
WRAP box i would like to use one specific dns.
Bye
- Original Message -
From: Kim-man \Punky\ TSE [EMAIL
/Dialog.pm line 75.)
debconf: falling back to frontend: Readline
Starting Quagga daemons (prio:10):.
Kim-man 'Punky' TSE wrote:
Edwin,
I tested last night and and apt-getting aircrack-ng, olsrd and
wavemon. It doesn't complain about locale and readline, but about
apt-utils not found.
Punky
Hi Matt,
I install use grub over a year and didn't have see a single problem,
what is the host distro you install voyage on?
Again, please subscribe to voyage mailing list so that you can get
community support.
http://list.voyage.hk/mailman/listinfo/voyage-linux
Regards,
Punky
Matthew
Hi Matt,
Can you also show me the content /boot/grub/menu.lst on the CF?
Punky
Matthew Lewis wrote:
Hello,
I had the same problem but when I selected Lilo for the boot manager all
worked fine. Grub would not seam to work on my wrap board.
Matt
Hi,
I'm trying to install Voyage on WRAP.2E
1 - 100 of 747 matches
Mail list logo
