On Monday 27 October 2003 08:45, Lowell Gilbert wrote:
> Martin Paredes <[EMAIL PROTECTED]> writes:
> > how can i enable a multifuncion card Basking Combo from Shark
> > Multimedia wich is compatible with a MPU-401.
>
> What happened when you tried the usual method?
Hi Lowell:
Thanks for answerin
In message: <[EMAIL PROTECTED]>
Ronald Klop <[EMAIL PROTECTED]> writes:
: How van I solve this?
: arp: unknown hardware address format (0x2063)
: arp: unknown hardware address format (0x)
I think you might have been the person to file a pr on this. In any
event, I broke ep a while
Hi;
I am new to the unix, lunix and freebsd systems. I am
familiar with bios settings for win98se and xp,
however, i am not with freebsd or otherwise.
I have 2 machines that i am building. one has a
Gigabyte GA-7VRXP(2.0) m/b and the other has an Asus
A7V333 m/b.
In my bios settings, how should
Keith,
Congrats on your new OS!
Did you know that you can press "Alt-F2" to see some debug output
during the install? "Alt-F2" changes to the second of the
virtual consoles, "Alt-F1" gets you back to the first console, "Alt-F3"
to the third, etc. I tried this once on the install of an earlier
Hello,
i 'am search for an solution for a multi-jailed enviroment. I have an
system with
around 20 jailed enviroments that are made for easy of use. The idea is
to add to this jailed system an jailed central firewall for all other
jailed enviroments.
To gets this to run i need a special routing
Hello
I have been trying to install FreeBSD 5.1 from DVD-rom and i can boot
the system from the dvd OK set up my parftitions and all but when it
comes to commit at the end i get a error message.
I have been following the examples in book
(The Complete FreeBSD)
O'Reilly
Greg Lehey
Every thing ru
On Wed, 2003-10-29 at 16:06, Ray Seals wrote:
> On Wed, 2003-10-29 at 14:28, Ray Seals wrote:
> > Just purchased and eMachine M3512. I cannot get the touch pad to work.
> > Anyone else know if it's supported or any ideas on getting this
> > running. I have tried it with both 4.8 and 5.1. I woul
Hello,
I have 4.1 running on a Compaq Proliant 2500 with two Pent Pro 200 and 1 GB.
memory
The system has the standard built-in SCSI controller, embedded 10/100 and
embedded video and everything works just fine under 4.1
I decided to upgrade to the most current version (5.1) avilable from FreeBSD
On Thu, 30 Oct 2003 02:53:29 +0100
".VWV." <[EMAIL PROTECTED]> wrote:
>
> Hello to all.
>
> Are you sure you really need continuous upgrading your operating system,
> until the end of your life?
More features and the occasional speed boost :) I noticed a nice bit of a
performance dif between 4.
Zhang Weiwu wrote:
Hello. When I make deinstall a port I often get the message:
port xxx depends on this port, but I'll still deinstall it anyway.
That's really frustrating. I'd like to be able to know who depends on it
before de-installing it. Any suggestions?
Look through the handbook I didn'
hey..
i just invested my money in this product... and im beginning to wonder why
i chose microsoft =P
anywho... the keyboard works great, other than the fact that i gotta deal
with the different layout of the keys =PP lol ill live... but the mouse..
the mouse.. i think its a fbsd related prob cuz
On Sat, Nov 01, 2003 at 11:45:42AM +0800, Zhang Weiwu wrote:
> Hello. Newbie question again:
>
> This is the first time I try to compile XFree86. Before that I took a
> look at /usr/ports/x11/XFree86/pkg-descr where it says:
>
> XFree86 is a added-value pack for X11R6 that supports several versio
Hello. Newbie question again:
This is the first time I try to compile XFree86. Before that I took a
look at /usr/ports/x11/XFree86/pkg-descr where it says:
XFree86 is a added-value pack for X11R6 that supports several versions
of Intel-based Unix and Unix-like operating systems. XFree86-3.0 was
p
Hello. When I make deinstall a port I often get the message:
port xxx depends on this port, but I'll still deinstall it anyway.
That's really frustrating. I'd like to be able to know who depends on it
before de-installing it. Any suggestions?
Look through the handbook I didn't find an answer.
__
On Fri, Oct 31, 2003 at 10:51:58AM +0800, Suken Woo wrote:
> hi,folks:
> There are few confuses with me after cvsupd(10.28.2003) to 4.9R
> I found that in my GERNERIC/LINT file i couldn't find
> anything about PAE options :( and I found these 2
That is probably because there isn't anything abo
I stumbled upon a port in /usr/ports/sysutils, the name is
cd9660_unicode-1.0:
It's long description is:
Kernel driver for reading CD disks with non-English filenames.
Since I am using my Gnome2 Desktop in an english environment, when I
mount CD's containing Japanese names...The icon that shows
At 8:45 PM -0700 10/28/03, <[EMAIL PROTECTED]> wrote:
I have a printer configured in the BSD, is working fine, now
I need to enable that other systems print in this printer,
to do this I add 2 lines to the file /etc/hosts.lpd
10.192.2.134
as_nte.intranet.telmex.com.
but the remote system can't prin
hi,folks:
There are few confuses with me after cvsupd(10.28.2003) to 4.9R
I found that in my GERNERIC/LINT file i couldn't find
anything about PAE options :( and I found these 2
files modified date is:
-rw-r--r-- 1 root wheel 9763 4 28 2003 /sys/i386/conf/GENERIC
-rw-r--r-- 1 root wheel 104976
On Thu, 2003-10-30 at 16:38, Gregory Stearns wrote:
> I hate to be a pest but is there a utility to do http web
> browsing from the command line, and how would I use it?
As othes have mentioned, there are many choices--but you probably just
want to know which one to use, and how to get started.
Hello All!,
Problem: I have two sound cards one inserted into PCI slot and one
integrated into motherboard, all cards detected and working fine.
First is pcm0 and second is pcm1.
Since first (external) detected on boot first it is default to sound
output, but i wish to use second (integrated)
On Fri, 2003-10-31 at 02:54, Ajitesh wrote:
> Hi Friends, I have been asked to come up with some kind of system
> so that our company can share the
> data & drawings with different customers and vendors.
A very good and quick CMS setup for this kinda thing:
http://www.plone.org
freebsd port:
On Thu, 2003-10-30 at 17:59, Ronnie Clark wrote:
> Thanks all for the suggestions. I have the port
> installed, but how do I configure this beast to work
> with OpenView? I have looked at the online docs for
> the port, but it is all jibberish to this newbie.
> Anyone have a simple to follow doc or
Hi,
I am having a problem with the X-Modem product sold by:
www.adslnation.com
This is a USB or ethernet adsl modem that is by default supposed to work
in a half-bridge mode, where the IP address assigned from the DSL
provider is passed directly to the connected computer. This appears to
be
On Thu, 30 Oct 2003, Gregory Stearns wrote:
> I hate to be a pest but is there a utility to do http web browsing from the command
> line, and how would I use it?
>
> Also how do I configure Xwindows?
Start off with (as root):
XFree86 -configure
This will build a basic XF86Config file
Hi Drew,
This should find all files created or modified on 25th October:
find / -mtime 6 -ls -o -ctime 6 -ls
(As today is 31st October which is 6 days after 25th. You may need to
widen your search a little with a seperate search with 7 as the paramter
as 6 may not catch files that were created
Gregory Stearns wrote:
I hate to be a pest but is there a utility to do http web browsing from the command line, and how would I use it?
Lynx (/usr/ports/lynx) is a text mode http browser.
To install, connect to the Internet, and then run
the following commands as root:
$cd /usr/ports/lynx
$ma
Hello,
>From the command line you can use an assortment of tools, even telnet if
you want... ;)
www <== Wow, this one is fun. Probably already installed.
lynx <== Can be a security nightmare depending on what your computer is
being used for.
elinks <== Haven't used it myself but I foun
Scott,
I have problems with my startx script,see my other email
"when I invoke startx, it seems to 'freeze' for a minute or so,then starts".
Before fixing the startx issue (I think startx has been overwritten
by the fluxconf->XFree86-libraries-4.3.0 installation),
I tested xinit after setting the
On Thu, 30 Oct 2003, Gregory Stearns wrote:
> I hate to be a pest but is there a utility to do http web browsing from the command
> line, and how would I use it?
Try lynx or links
Rus
--
w: http://www.jvds.com | JVDS Virtual Servers
e: [EMAIL PROTECTED]| Daily Specials
t: +44 7919 373
I hate to be a pest but is there a utility to do http web browsing from the command
line, and how would I use it?
Also how do I configure Xwindows?
--
__
Sign-up for your own personalized E-mail at Mail.com
http://www.mail.com/?sr=signup
C
I hate to be a pest but is there a utility to do http web browsing from the command
line, and how would I use it?
Also how do I configure Xwindows?
--
__
Sign-up for your own personalized E-mail at Mail.com
http://www.mail.com/?sr=signup
C
Hi,
I just installed a port (fluxconf).That port installed Xfree86 Libraries 4.3.0.
Since then,when I invoke startx, it seems to 'freeze' for a minute or so,
then it starts regularly the window manager.
I include the output of 'uname -a' ,the X Windows XFree86 version, and
the brief trace of star
I hate to be a pest but is there a utility to do http web browsing from the command
line, and how would I use it?
Also how do I configure Xwindows?
--
__
Sign-up for your own personalized E-mail at Mail.com
http://www.mail.com/?sr=signup
C
Reply-to: risto phario <[EMAIL PROTECTED]>
From: risto phario <[EMAIL PROTECTED]>
TO: paul beard <[EMAIL PROTECTED]>
CC:
Date: Thu Oct 30, 2003 11:38:05 AM PST
Subject: Re: kernel "make" error.
Ok, I have attached the error msg. Thanks.
Risto
- Original Message -
From: paul beard <[
On Thu, 30 Oct 2003 15:14:12 -0800 (PST)
[EMAIL PROTECTED] granted us these pearls of wisdom:
> > In the last episode (Oct 30), Ronnie Clark said:
> >> Thanks all for the suggestions. I have the port installed, but how
> doDaemoncontrol
> >> I configure this beast to work with OpenView? I have loo
hi list
i'm trying to set up a concatenated vinum volume. i read chapter 13 in
the handbook and as so often i've found a nice how-to on
freebsddiary.org but somehow i'm stuck.
my /etc/vinum.conf file is like this:
drive a device /dev/ar1h
drive b device /dev/ar2h
volume stuff
plex org concat
s
> In the last episode (Oct 30), Ronnie Clark said:
>> Thanks all for the suggestions. I have the port installed, but how
doDaemoncontrol
>> I configure this beast to work with OpenView? I have looked at the
>> online docs for the port, but it is all jibberish to this newbie.
>> Anyone have a simple
In the last episode (Oct 30), Ronnie Clark said:
> Thanks all for the suggestions. I have the port installed, but how do
> I configure this beast to work with OpenView? I have looked at the
> online docs for the port, but it is all jibberish to this newbie.
> Anyone have a simple to follow doc or s
Thanks all for the suggestions. I have the port
installed, but how do I configure this beast to work
with OpenView? I have looked at the online docs for
the port, but it is all jibberish to this newbie.
Anyone have a simple to follow doc or set of
guidelines to setup net-snmp to be monitored by
Ope
I can't get make buildworld to finish because of the errors I am getting
with sendmail. I am including logs for both buildworld and mergemaster.
To try to remedy this I did the following:
1) refreshed my /usr/src from CVS
2) run /usr/src/usr.sbin/mergemaster/mergemaster.sh (from UPDATING)
I am st
Hello Mark,
Wednesday, October 29, 2003, 1:48:33 AM, you wrote:
M> Mrtg has gone berserk on me; apparently they have never heard of clocks
M> being adjusted because of Daylight Savings:
M> -
M> Rateup ERROR: /usr/local/bin/rateup found that 192.168.0.1_1's log
If I'm not mistaken (I'm sure someone will correct me if I am ;) a NIC
driver should be either in the kernel or a module, so you'd want to do a
make buildkernel followed by a make installkernel after installing the
patch.
chris
--- Ray Seals <[EMAIL PROTECTED]> wrote:
> I have a quick question.
I have a quick question. I have found a patch submitted on GNATS for a
problem I'm having with a NIC driver. I understand using patch but my
question is what do I recompile to get an updated driver? Do I need to
do a make world or is there a shorter way around this.
Some rules of thumb would be
On Oct 30, 2003, at 4:20 PM, [EMAIL PROTECTED] wrote:
I just purchased FreeBSD 5.1 and got it installed
sucessfully-YEAH!-yesterday. I am a "new newbie" with no previous
experience with UNIX, so I feel this is a wonderful accomplishment. I
ran accross one problem, though. Every time I install
I just purchased FreeBSD 5.1 and got it installed sucessfully-YEAH!-yesterday. I am a
"new newbie" with no previous experience with UNIX, so I feel this is a wonderful
accomplishment. I ran accross one problem, though. Every time I installed ALL, the
installation froze after about 30 minutes.
Hi everybpdy,
Has anybody succeeded to configure a cable modem
SB4200 (4100) using the USB connection?
Is there any chance that this USB modem will get
support under FreeBSD? It is supported by Debian, and
I it is the only annoying thing that keeps me from
switching completely to FreeBSD...:(
I have a system running 5.0-RELEASE on an AMD 667Mhz processor with 256MB
ram, Soyo mobo. Install was no trouble, and setup of X, KDE, MySQL, Apache
went fine. I ran a setup of both xmms and mplayer as well. Then I went for
an install of Webmin.
Once webmin was complete, I was running in KDE, I
I am attempting to install 4.8 or 4.9-RELEASE on a Compaq proliant
8000R which uses a Smart Array 3100ES Controller.
When going through the visual kernel config, I notice that there is
no driver support for said card. When I allow FreeBSD to just use
any and every driver available, it won't detect
just signed up and still haven't seen an email I sent about 15 minutes
ago.
--
"Greetings, large black person. Let us not forget to form a team up
together and go into the country to inflict the pain of our karate
feets on some ass of the giant lizard person."
On Thu, 30 Oct 2003, .VWV. wrote:
> Are you sure you really need continuous upgrading your operating system,
> until the end of your life?
Yes.
New releases means new features and bug fixes (trivial as they may be
sometimes) VWV. From a highly productive feature to a simple visual
effect, I person
I am currently attempting to install FreeBSD 4.8 (or 4.9) on a
Compaq Proliant 8000R with a Smart Array 3100ES Controller. I show
where 4.8+ is supposed to support the device, but I noticed it's
either not being probed properly at boot so that the kernel config
can assign drivers for it, or I need
If you want something new and yet very powerfull, you can try AWS (Ada
Web Server).
This an HTTP server written in Ada (so very robust). It supports many
protocols and is very simple to use.
You can find more information on http://libre.act-europe/aws
Florian
Ajitesh wrote:
Hi Friends, I have
Dixitur illum Leo Bicknell <[EMAIL PROTECTED]> scribere...
[Moving to questions, since all of these are FAQs]
Hi, here we go...
> 1) It appears IPFW just works (eg, configure it in /etc/rc.conf). It
>used to be you had to compile it in. What's interesting to me is
>that IPFW options a
Hey all,
I was wondering if anyone else has ever run into this
error message with FreeBSD 5.1. I have successfully
installed FreeBSD 4.7, 4.8 and 5.1 on the same machine
and 5.1 is the only version that gives me this
particular error message when it boots up. I even get
the error message when I'm
On Thu, Oct 30, 2003 at 02:16:45PM -0500, Gregory Stearns wrote:
>
>When I try and mount my cdrom or my floppy I get an invalid super
>block error.
>
>I use the following command:
>
>mount /dev/acd0c /cdrom
>
>How do I correct this error so that I may use my cdrom?
You nee
In the last episode (Oct 30), Gregory Stearns said:
>
>When I try and mount my cdrom or my floppy I get an invalid super
>block error.
>
>I use the following command:
>
>mount /dev/acd0c /cdrom
Try "mount -t cd9660 /dev/acd0c /cdrom", since cdroms aren't usually
written in Free
When I try and mount my cdrom or my floppy I get an invalid super
block error.
I use the following command:
mount /dev/acd0c /cdrom
How do I correct this error so that I may use my cdrom?
Thank you,
Greg Stearns
--
___
> Hi Friends, I have been asked to come up with some kind of system so that
> our company can share the data & drawings with different customers and
> vendors.
What you're describing sounds like an extranet. Apache with SSL sounds like
a good idea here, especially if this is sensitive data.
> Pr
Hi Friends, I have been asked to come up with some kind of system so that our company
can share the data & drawings with different customers and vendors.
Present requirements: 50 Gb disk space, web access & password protected
directories/folders and less expensive.
If I am wrong please c
On Thu, Oct 30, 2003 at 03:39:04PM -, Chris Howells wrote:
> > On Wed, Oct 29, 2003 at 05:52:09PM -0500, Dragoncrest wrote:
>
> > Do you need to update it (security advisories, etc)? If yes, then
> > update. If no, then don't ;-)
I wrote the above, not "dragoncrest". Please don't mung attr
On Thu, Oct 30, 2003 at 10:08:13AM -0500, M.D. DeWar wrote:
> I am trying to install java.
> Finally with some help from another person on the java freebsd list I am
> getting there.
> However I have run into this error and not sure how to fix it.
>
> Your libtool installation is out of date. Plea
On Thu, Oct 30, 2003 at 10:21:45AM -0800, Kris Kennaway wrote:
> On Thu, Oct 30, 2003 at 07:01:26AM -0600, Doug Poland wrote:
> >
> > Good day,
> >
> > I just did a fresh cvsup and was build makeworld when I encountered
> > and error in the perl build
> >
> > ===> gnu/usr.bin/perl/x2p/s2pl
> >
On Thu, Oct 30, 2003 at 02:19:26PM +, Wayne Pascoe wrote:
> Hi all,
>
> I just upgraded 2 servers to 4.9. On both of them, since the upgrade,
> ssh's version is being reported as
>
> -bash-2.05b$ ssh -V
> OpenSSH_3.5p1 FreeBSD-20030924, SSH protocols 1.5/2.0, OpenSSL
> 0x0090703f
>
> I thou
On Thu, Oct 30, 2003 at 07:01:26AM -0600, Doug Poland wrote:
>
> Good day,
>
> I just did a fresh cvsup and was build makeworld when I encountered
> and error in the perl build
>
> ===> gnu/usr.bin/perl/x2p/s2pl
> ===> gnu/usr.bin/perl/x2p/find2pl
> ===> gnu/usr.sbin
> 1 error
> *** Error code
On Thu, Oct 30, 2003 at 11:46:04AM +0100, Norbert Koch wrote:
> Kris Kennaway <[EMAIL PROTECTED]> writes:
>
> > Follow the example in the pkg_which(1) manpage to locate stale files
> > in /usr/X11R6 and /usr/local. It is possible that you have old files
> > lying around (e.g. from an incorrect po
Has anyone had any success getting a wavelan card working in 4.9?
I have a Dell Ispiron 5150 with a fresh install from the CD, and it says
that the Lucent WaveLan card is there... (card inserted, pccard slot 0) but
no wi0 inteface is created.
Any ideas?
How do I go about troubleshooting this?
+++ Jason Dictos [freebsd] [29-10-03 12:18 -0800]:
| Hi All,
|
| I have FreeBSD 5.1 with KDE 3 running kmail. Kmail pulls from the
| local mailbox into its mail archive. I'd like to figure out a way to reading
| kmail email from the console. Is that possible?
|
| I can already read mail in
Hello..
Sorry, a little off subject, but.. you guys know the answers.
I am not a protocol expert, but I play one on the job har...
I was chatting with our internet provider who gets their feed from ATT,
he notified me that they are blocking all ICMP protocols.
By gosh by golly, I can't ping, t
On (2003/10/30 18:16), Sheldon Hearn wrote:
> > I'm using SMBFS on FreeBSD 4.9-PRERELEASE from 2003-09-18, and running
> > into problems mounting W2K shares. I was last able to mount these
> > shares a month ago. Since then, the only change I'm aware of was the
> > world update (to catch securit
On Thu, Oct 30, 2003 at 11:35:00AM -0500, Jonathan Arnold wrote:
> Alex de Kruijff wrote:
>
> >On Fri, Oct 10, 2003 at 09:30:30AM +0800, Gil Agno Virtucio wrote:
> >
> >>and thanks again for reading this email. I had previously written an
> >>email to you about my mouse problems. Everytime I try t
Alex de Kruijff wrote:
On Fri, Oct 10, 2003 at 09:30:30AM +0800, Gil Agno Virtucio wrote:
and thanks again for reading this email. I had previously written an
email to you about my mouse problems. Everytime I try to run KDE, when
I move the mouse the cursor moves to the upper right hand corner. I
On (2003/10/30 11:37), Sheldon Hearn wrote:
> I'm using SMBFS on FreeBSD 4.9-PRERELEASE from 2003-09-18, and running
> into problems mounting W2K shares. I was last able to mount these
> shares a month ago. Since then, the only change I'm aware of was the
> world update (to catch security patche
> On Wed, Oct 29, 2003 at 05:52:09PM -0500, Dragoncrest wrote:
> Do you need to update it (security advisories, etc)? If yes, then
> update. If no, then don't ;-)
Considering that security fixes will be back ported to the 4.8 branch,
your comment doesn't make much sense. Keep it at 4.8, there's
I am trying to install java.
Finally with some help from another person on the java freebsd list I am
getting there.
However I have run into this error and not sure how to fix it.
Your libtool installation is out of date. Please remove
and reinstall /usr/ports/devel/libtool.
In /usr/local/bin I h
On Thursday 30 October 2003 15:27, Peter Ulrich Kruppa wrote:
> Hi!
>
> Today I found this message on our Samba server and on our proxy:
>
> Oct 30 14:08:55 proxygev /kernel: arp 172.16.2.254 moved
> from 00:a0:57:05:c7:81 to 00:a0:57:05:c7:81 on rl0
> (Same message with sambagev and si
[EMAIL PROTECTED] wrote:
Hi,
I just installed a port (fluxconf).That port installed Xfree86 Libraries 4.3.0.
Since then,when I invoke xinit, it exits with the error
"xf86OpenConsole: Server must be running with root permissions"
I include the output of 'uname -a' and
the brief output from xinit
Jon, you're right about me building JDK from ports, but I altready have
the JDK binary installation on this server installed which was transfered
here from some another server, but lacking the libjavaplugin_oji.so file.
So what I need is just adding this single file to the already installed
JDK.
-
Hi!
Today I found this message on our Samba server and on our proxy:
Oct 30 14:08:55 proxygev /kernel: arp 172.16.2.254 moved
from 00:a0:57:05:c7:81 to 00:a0:57:05:c7:81 on rl0
(Same message with sambagev and sis0 on our samba machine)
172.16.2.254 is the address of our dsl route
Hi all,
I just upgraded 2 servers to 4.9. On both of them, since the upgrade,
ssh's version is being reported as
-bash-2.05b$ ssh -V
OpenSSH_3.5p1 FreeBSD-20030924, SSH protocols 1.5/2.0, OpenSSL
0x0090703f
I thought that anything prior to 3.7p1 was vulnerable ? Is this the
correct version that
Hey
I would be intresting at Telewell 300c ADSL modem drivers for FreeBSD unfortunately
there is only linux drivers at now. Is't possible somebody on FreeBSD team could port
those drivers for FreeBSD? I think many finnish ADSL modem users would profit them
verry much ;)
Here is linux drivers a
It sounds like you are trying to build the native JDK 1.3 from ports. In
order to do that you need to have a JDK already installed to 'bootstrap'
from. The default method as specified in the makefile seems not to be
working.
Given I also had this problem, I found the best way around it was to
Hello,
I am running xmule-1.6.0 and it is not creating the .part.met files, just the .part
ones.
How can I fix this out?
Thanks
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any ma
On Thu, Oct 30, 2003 at 06:57:35AM -0500, Matthew Emmerton typed:
> > Hi list, the question is: can I tar a hole directory without include the
> > tree ??? I mean when I tar all files in a /dir1/dir2/dir3 path, the tar
> file
> > includes me the path too and I want to tar only the filenames in dir3
On Thursday 30 October 2003 13:24, Shailesh Joshi wrote:
> Hi,
> I want to install FreeBSD on my home PC. I have
> instlled Red Hat Linux currently on my PC.
>
> My question is i want to get all files for
> installation (i.e. all ports), where can i get them in
> one shot or is there any location w
On Thu, 30 Oct 2003 19:49, [EMAIL PROTECTED] wrote:
> Hi,
>
> I'm about to set up several identical machines (identical hardware
> both in terms of processor, harddisk, LAN etc.) with FreeBSD 4.9. The
> only difference between these machines is they're running under
> different IP-addresses - all t
Good day,
I just did a fresh cvsup and was build makeworld when I encountered
and error in the perl build
===> gnu/usr.bin/perl/x2p/s2pl
===> gnu/usr.bin/perl/x2p/find2pl
===> gnu/usr.sbin
1 error
*** Error code 2
1 error
*** Error code 2
1 error
That's all the error message I received. Is th
Hi,
I want to install FreeBSD on my home PC. I have
instlled Red Hat Linux currently on my PC.
My question is i want to get all files for
installation (i.e. all ports), where can i get them in
one shot or is there any location where i can get all
ports for FreeBSD.
These ports include JBoss, EClip
On Mon, 27 Oct 2003 04:51:18 +0300 (MSK) Alexey Koptsevich <[EMAIL PROTECTED]>
probably wrote:
>
> Hello,
>
> After recent reinstallation of X I cannot use Russian layout anymore. With
> the old release (4.1.0), I had two lines in the XF86Config file which did
> the job:
>Option "XkbLa
> Hi list, the question is: can I tar a hole directory without include the
> tree ??? I mean when I tar all files in a /dir1/dir2/dir3 path, the tar
file
> includes me the path too and I want to tar only the filenames in dir3: I'm
> using the syntax tar -czf /path/to/store/myfile.tgz
> /the/path/wh
- Original Message -
From: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, October 30, 2003 12:20 PM
Subject: when I invoke startx, it seems to 'freeze' for a minute or so,then starts
Hi,
I just installed a port (fluxconf).That po
Hi,
I just installed a port (fluxconf).That port installed Xfree86 Libraries 4.3.0.
Since then,when I invoke xinit, it exits with the error
"xf86OpenConsole: Server must be running with root permissions"
I include the output of 'uname -a' and
the brief output from xinit for the problem
Thank yo
Hi,
I just installed a port (fluxconf).That port installed Xfree86 Libraries 4.3.0.
Since then,when I invoke startx, it seems to 'freeze' for a minute or so,
then it starts the window manager.
I include the output of 'uname -a' and
the brief trace of startx execution for the problem,also reported
Kris Kennaway <[EMAIL PROTECTED]> writes:
> Follow the example in the pkg_which(1) manpage to locate stale files
> in /usr/X11R6 and /usr/local. It is possible that you have old files
> lying around (e.g. from an incorrect port upgrade, or a port's broken
> pkg-plist), that are confusing the fire
Hi guys,
can anybody please send a file to me or give a link where I can download
it myself:
jdk1.3.1/jre/plugin/i386/ns600/libjavaplugin_oji.so
I'm trying to run Mozilla and all worked well except java support, because
the compiling of jdk13 didn't work due to some weird errors, and ftp/
+++ Xpression [freebsd] [29-10-03 09:00 -0500]:
| Hi list, can I edit a file and delete a line by searching any parameter with
| bash ??? Thanks...
|
|
| --
grep -v string oldfile > newfile
___
[EMAIL PROTECTED] mail
not yet, maybe?
---
Med Vennlig Hilsen / Best regards
Christer Solskogen / dizzy tun3Z
http://dtz.cjb.net / http://carebears.mine.nu
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
Hi ewald,
o) Is there a way to clone one machine to another one "over the net",
i.e. by writing an image file from one machine to a server and then
setting up the other machines from that image?
http://www.feyrer.de/g4u/
o) Is there a way to clone FreeBSD installations by copying the entire
FreeB
Hi folks,
I'm using SMBFS on FreeBSD 4.9-PRERELEASE from 2003-09-18, and running
into problems mounting W2K shares. I was last able to mount these
shares a month ago. Since then, the only change I'm aware of was the
world update (to catch security patches) and accompanying mergemaster.
Here's t
Hi,
I'm about to set up several identical machines (identical hardware
both in terms of processor, harddisk, LAN etc.) with FreeBSD 4.9. The
only difference between these machines is they're running under
different IP-addresses - all the rest (kernel, software,...) should be
identical.
In order t
Hi,
I'm about to set up several identical machines (identical hardware
both in terms of processor, harddisk, LAN etc.) with FreeBSD 4.9. The
only difference between these machines is they're running under
different IP-addresses - all the rest (kernel, software,...) should be
identical.
In order t
1 - 100 of 106 matches
Mail list logo