OK Great , Thanks to Everyone who answered , I will sleep better now one less
thing to worry about
Don KA9QJG
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of mwbese...@cox.net
Sent: Tuesday, August 31, 2010 12:51 PM
To: repeater-builder
Wow this must of Really been a Dumb question , No one answered it
Don KA9QJG
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of ka9qjg
Sent: Monday, August 30, 2010 9:07 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder
Duplexer have any problems inside with Condensation from Heating
up in use and Cooling down
Thanks Don
KA9QJG
to set it up
too. I have a feeling the Radio has a Bad Switching transistor inn this Ckt .
Thanks in Advance
Don
KA9QJG
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Richard W. Solomon
Sent: Sunday, August 22, 2010 10:25 AM
To
Thanks Dick , it is Conventional I think VHF to be used as a link , He said He
can program it for Low but not High
Thanks Don KA9QJG
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Richard W. Solomon
Sent: Sunday, August 22, 2010 12:51 AM
Advance
Don
KA9QJG
And I am the Nut who added to this Post Only because I did not know what
it Meant
http://en.wikipedia.org/wiki/Jesus_nut
73 De Don KA9QJG
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of skipp025
Sent: Friday, August 20, 2010 4:38 PM
To
Hate to see Ya Go but if You must here is one More You will get , You
subscribed and You have to Unsubscribe Yourself unless You get kicked off ,
At the Bottom of the Page You will see Where to do it You can also set up
how You would like to receive the E-Mails
73 De Don KA9QJG
From
You had a Great Vacation
Don KA9QJG
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Dave E Stephens Sr
Sent: Wednesday, August 11, 2010 8:19 AM
To: kf6...@yahoo.com
Subject: [Repeater-Builder] Sorry everyone
so i got on here this
Greg , That is the Same as LMR-400 Put that in the Calculator and Check I
did not see your Freq posted , Good advice use one piece Connectors
/splice Etc . will give a big loss depending on the Freq hope this helps
http://www.ocarc.ca/coax.htm
Godd Luck
PS Trees are great at
.
They also had some Fancy Motorola HT-220 Scan Etc. Kits , I think this Co
is the Same People http://www.theportableclinic.com/ Check the site lots
of old memories on it I also think Our Member Ted at
http://www.mdmradio.com/ was involved with this place I think
Don
KA9QJG
From
Glen , I know some will think If I "am to dumb to know what they are ,
Then I do not need them . But I still would like to know in layman terms
what is a INVAR Rodif I was guessing Maybe something that goes in a
duplexer
Thanks
Don KA9QJG
From: Repeater-Builder@yahoogroup
Had a Member of the Group send Me a Link direct , I thought I would share it
then We can get back to repeater Building before We get hollered at lol
http://www.hq.nasa.gov/alsj/quindar.html
Don
KA9QJG
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil
Meant a lot to the First Astronauts with Communications that is how it got
started I think , I forget if it was a Pre or after Transmission
Don
KA9QJG
Nothing if you're name is roger. Smile emoticon
From: Larry Horlick <mailto:llhorl...@gmail.com>
Se
and I could
not do it , So they had someone get on E-Bay and ordered a 25 Watt FM
Transmitter and outside ant and have been on the Air for 2 Yrs .
They have almost the coverage of My 2 Repeaters
Good Luck
Don
KA9QJG
PS Being a nice Person and helping do something illega
Building
Don KA9QJG
30 Yrs ago , of pallets of Motorola Equipment being sent to the
Dump because Mother M Did not want them back in service to lose money , I
looked and Looked Never did find that dump Ha Ha
Good Luck
Don KA9QJG
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil
154.600 MHz
More info on Murs at
http://home.provide.net/~prsg/murs_faq.htm
And the fact that almost everyone is selling Bubble Pack FRS/GMRS 22 Freq
Radios and People unknowing interfering with Lic GMRS Repeaters that is bad
too
Don KA9QJG
ished
Amphenol Connectors I was looking through them and He ask You like the old
dirty ones , I said yes I could just clean them up, He said well You can
have the whole box for $ 5.00 Dollars I gave Him the money and Smiled all
day at the hamfest .
Don
KA9QJG
From: Repeater-Bu
I also used the Amp Motorola Speaker , I Have Alternator Whine Because I use
the Same Source for the Scanner and Speaker . Also I found out if I key
up on 10 or 6 Meters I get Audio Feedback , The Non Amp Motorola Speakers
work great too
Don
KA9QJG
From: Repeater-Builder
Well Kevin as Usual You and the people who run this very helpful group were
right on top of this from the beginning and did a Great job of resolving the
Problem
It is appreciated by all
Happy Repeater Building
Don KA9QJG
PS Sometimes in life We do not miss things until they
I do not know if it related But a few days ago I upgraded to Goggle Chrome
and I have had nothing but problems including this ever since, I did the
Add and remove for that then My shortcuts would not work . I know nothing
is wrong with this site so I just click OK
Don
KA9QJG
So the answer is YES the
>Decibel VHF 6" Repeater cavity filter 148-174 DB4001-1
Will tune right to 144.315 and not lose the Specs it would Have at 148 ?
And dos the Length of the Coax going to the Micor /Mobile have to be cut
at a Certain Length
Thanks
Don KA9QJG
dos Length of cable from this to the Radio
have to be a certain length . This will be a link not a Repeater.
Decibel VHF 6" Repeater cavity filter 148-174 DB4001-1
Or would something like this http://tinyurl.com/yd3b2fa
Be better
Thanks
Don KA9QJG
Randy I think it is on the This Site
http://www.repeater-builder.com/com-spec/com-spec-index.html
Good Luck
Don KA9QJG
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Randy Fisher
Sent: Saturday, March 27, 2010 4:58 PM
To: Repeater
Well some just do not know , be Thankful We have this wonderful group that
educates us He also has a
$900 Antenna
Happy repeater Building
Don KA9QJG
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of kc7stw
Sent: Saturday, March 27
Well if this is it I had guessed on the Price But close I will Get that
little Sucker with My 440 HT
http://tinyurl.com/yeyccyk
Who will be the First do get the WARA Award Worked all Robot Award
73 De Don KA9QJG
Got the auction number?
On Wed, Mar 3, 2010 at 9:30 PM
FYI
Our Thoughts and Prayers go out to all His Family and Friends
73 De Don KA9QJG
http://www.arrl.org/news/stories/2010/03/01/11367/?nc=1
TAPR President Emeritus Dr David Toth, VE3GYQ (SK)
David Toth opened the 2008 ARRL/TAPR Digital Communications Convention.
Watch the video
Thank You , I now have a Shortcut on My Desktop to that and Even on My
USB Thunbdrive and 3 1/4 floppy disk , Yes some still use them and that
has nothing to do with old age lol
Happy Repeater Building
Don KA9QJG
This is what you saw - and this is what you are looking for
find it. Oh
well just wait Some of you will catch up soon , My favorite saying is that
it's Great as We get Older to learn something New every day it is
remembering it is the problem
PS Please tell Me that I "am not just making this up
Happy Repeater Building
Don KA9QJG
Don KA9QJG
On Feb 16, 2010, at 9:57 PM, KE4ZDG wrote:
> Hey folks,
>
> I'm working on a GE Mastr II high band repeater. Someone gave me some
crystals that were made up for 146.010 RX. I installed one in an EC ICOM and
the best I can adjust for is 146.0064, whic
TT Mic the Radio has built in TT Pad and
Numbers can be stored in Mem I do not Hear any TT When I press them either .
but I can hear them from the int Speaker but not in the Carrier .
> >
> > I did the Adjustments to increase them but nothing is heard any Thoughts
on this would be greatly appreciated
> >
> > Thanks Don
> >
> > KA9QJG
> >
> >
> >
Skip that sounds like the making of a good redneck song , I will send that
to My daughter in Mo LOL
Happy Repeater Building
Don KA9QJG
Re: CB Radio Band Repeaters and Remote Base Operation
Location, vandals, wanna be FCC police types, angry hams, angry
CB'ers, bad equi
from a 10 Meter
Repeater , Except not legal in the US
Now back to our Regular Program
Happy Repeater Building
Don KA9QJG
, It
just keeps Working and Working , And You are not forgotten Help is always
only a E-mail or Phone call away .
http://www.repeater-builder.com/rbtip/micor220conversion.html
Good Luck
Don KA9QJG
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.co
Scott, check out http://www.mdmradio.com/
You know Lefty
You know Lefty also check Here
http://www.gcomradio.com/
PS The custom Made by You 220 Repeater is still working Great
Good Luck
Don KA9QJG
Fellows,
I'm on a quest for Mi
I have also heard of this being done and Liking anything Motorola Please Let
Me know what You find out
Don KA9QJG
Anyone have the correct info on expanding this to 222-225 mhz ham?How about
the rare codeplug AAM25MNF4DP5AN ?
barely Moved about 1.1 50 Watts in about 49 Out thatÂ’s good
enough for Me
I was surprised how little in and out mad such a difference
So I put everything back together and it is working fine
Thanks
Don KA9QJG
I just wanted to add I am not trying to Make a Ant but actually tune
Thanks Jim it is Made for that Freq Center at 445 But it is a Little High
Antenex FG-4405 Actually 72 In
http://tinyurl.com/ydenqf4
Don KA9QJG
Good luck. I don't know what is inside the tube but whatever it is it is
too short. If there are several sections you ma
the rod to get the SWR Low as possible
Then put it back together using JB- Weld or some type of Fiberglass repair
kit.
Thanks
Don KA9QJG
Been reading this info can someone Please Post the Web site for them
Thanks Don KA9QJG
I just picked up the X-9000 For 6 and 10 is it possible to use 2 Single
antennas one for 6 and one for 10 and use a mobile duplexer If so Who
makes the duplexer
Thanks Don
KA9QJG
In looking at the original message in this thread, I have used the
absolutely most simple
Chuck is correct , But if anyone is really interested in this Just Goggle
it and also U-Tube it is all the WWW
Enough said on this
Happy Repeater Building
Don KA9QJG
There was no attachment - it was a text description.
Chuck
WB2EDV
Anyone got a pic of
Luck
Don KA9QJG
We converted an old Kroger grocery store into a charter school. The building
has metal roofing and lots of steel beams, making it very difficult to get a
good signal on our Nextel and At&T cell phones. So far we have installed
antennas and amplifiers, to no avail.
We w
I use Polyphasers on both My repeaters. How do you know when they fail ,
Do you automatically loose the signals or as they take different nearby
strikes or do they gradually deteriorate the signals Which might make you
think of other problems.
Thanks
Don KA9QJG
I may be wrong and you will a lot of answers on this, But I think on the
Same Tower and at only 40 ft the Xmit will dense to much without a
duplexer ,
And I feel it is always better to be able to receive so that would be My
highest ant
Good Luck
Don KA9QJG
444.750
ilding
Don KA9QJG
PS Sorry if this has already been brought up
needed for Building
Repeaters too
73 De Don KA9QJG
http://www.farcircuits.net/
http://www.hobbytron.net/
http://www.electronickits.com/
http://www.cpcares.com/radio.html
For some other sites on this go here:
http://electronicsusa.com/tuna/tt2page1.html
http://www.njqrp.org/tuna
other
Digital signals ,
The RF Hash was so bad on My Icom 706 Mk-2 It blocked most Signals on HF .
The design may have changed since then but that was My experience
Good Luck
Don KA9QJG
channel
Anyway that is what it looks like
Good Luck
Don KA9QJG
,_._,___
Ted , Have You checked with http://www.brinkleyelectronics.com/
I think You have know them for Years , If they Don't I am sure they will
know someone
Good Luck
Don KA9QJG
id to cure it I think I use some rubber mounting
Good Luck
Don KA9QJG
Can someone Please put what this is in Layman Terms I have the Micor
Unified Chassis and I have a 2000C Ser Monitor What is this Card for ,
Sorry I just would like to know
Thanks Don KA9QJG
Ralph it is Probably on this site somewhere if Not check here
http://www.batlabs.com/
Hope that Helps
Good Luck
Don KA9QJG
___
it once you know who you are , and where in
the Heck did this Word KERCHUNK Originate from We all know what it means
Happy Repeater Building
Don KA9QJG
And other
Freqs when You are not being Interfered with, it is Sad to say but
Sometimes it turns out to be a Ham that No one would ever suspect.
Good Luck look in the Files in this Group I do recall info regarding
this
Don KA9QJG
ve to put in
Your address Just put in Your ZIP And it will show what's in your area.
Hope this Info Helps Someone
Good Luck
Don KA9QJG
PS Match the Ch numbers with the Freqs
People who dos
all the hard work and shares with others
Good Luck
Don KA9QJG
Me TOO On the Broadband Antenna set up
Don KA9QJG
Don KA9QJG
Chuck that looks like a Ham Ant beam, Do You know who the Person was
that owned it , They might know
Good Luck
Don KA9QJG
__,_ I use this NWS Receiver http://emergencyalertradio.com/
Good Price and Tech support if needed , Also I got tired of waiting
until Every Wed for the NWS To send A Test to make sure the Unit was
Turning off and on Properly ,
So I was able to obtain the Test files and use My Motorola
.
Thanks for the Bandwidth, No pun intended
Don KA9QJG
___
e Not
wanting People to know Who or where We live then We get a Ham Plate .
Look around on the Site for other Communications info Maps Etc
73 De Don KA9QJG
Check it out http://www.tvfool. <http://www.tvfool.com/> com/
Have you ever wondered what television signals are being broadca
t the Bottom of the Page
FCC Registered Cell Phone Towers
FCC Registered Antenna Towers:
FCC Registered Commercial Land Mobile Towers
FCC Registered Private Land Mobile Towers
FCC Registered Microwave Towers:
FCC Registered Amateur Radio Licenses:
FAA Registered Aircrafts:
Don KA9QJG
Wi
a mouse tried to get closer to
the warm heatsink. His carcass jammed the fan blades and got dessicated
with the heat.
Burt Lang VE2BMQ
Yes I guess that could Happen , I live in a City and My 6 Month old
Fridge quit working , Well of Course bring a Ham Some of us including
Me thing We can f
Ray go here __,_._ http://tinyurl.com/5548tq
Download the PDF of the Ant Hope this helps
Happy Repeater Building
Don KA9QJG, ___
to do it
Thanks
Don KA9QJG
Tom, I don't think it is Your Coax , I use 75 Ft of LMR-400 on a 220
Repeater 130 Watt Amp G-7 I have this set up at the site and at home
for testing and Never have had a problem , I do intend to up grade to a
Better low loss Coax , But at 6 Meter 60 Ft would be fine I think
You will get a
I have not tried anything but the G-7 , I have 2 Up and Never had any
Problems , I will also be watching the answers You get .
Good Luck
Jed I have never heard of them but being nosey I did a Search
http://tinyurl.com/4qwqrm
Maybe some else on Hear will actually know more
Happy Repeater Building
Don KA9QJG
limitations
Happy Repeater Building
Don KA9QJG
._,___
Looks like a great deal are You sure it is the ratchet Type, I checked
not to long ago for some at Tessco http://www.tessco.com/
Prices sure are a lot higher
Don KA9QJG
Robert E-Mail or call Ted at http://www.mdmradio.com/
He might have them
Good Luck
Don KA9QJG
, and will be in the messages area forever for
reference .
Happy Repeater Building
Don KA9QJG
Hello Dave the info is Right here on the Repeater Builder site
http://www.repeater-builder.com/maggiore/maggiore-index.html and in the
Messages
Happy Repeater Building
Don KA9QJG
KA9QJG
__
,_I started this topic and would like to Say Thanks for all the Input ,
I will Contact the FCC And get a Answer so Please lets Move on and
build some Repeaters
73 De Don KA9QJG __
__,_._,_ Thanks Mike , Points well taken As Everyone know we live in a
Society where Everyone is suing someone , That is why I was trying to
find out a actual FCC Ruling on this if Any
73 De Don KA9QJG
__
I really had Great Service from Bob at http://www.cardinalelec.com/
Fortunately it was only a Couple hour drive to drop it off and pick it
up , This is where the Pros go for the FCC And Military Certification .
Good Luck
Don KA9QJG
This is What I have used for about 3 Yrs Now it will Come on When the
NWS Sends the Sig and Will Close a Relay at the End of Transmission
Automatically , Now with the You can use Design Your own Connection to
Your repeater Sense Line, Timer Etc .
Great Tech Support and I even had them do
stopping it from working .
Happy Repeater Building
Don KA9QJG
Never had any Problems with Mice, But plenty with 2 Legged Rats, LOL
y two individuals involved
Well that made it more confusing, I should have of listened more in
School 45 Yrs ago
Happy Repeater Building
Don KA9QJG
more of Attenuation, it Has only happened twice in 5 Yrs. I do Not
know if they are all like that.
Happy Repeater Building
Don KA9QJG
Milk and on and on , Plenty of People out of Work , Children
to feed . Not that any of this is right and it is an Excuse. Hope things
Change soon
Happy Repeater Building
Don KA9QJG
Well that Picture sure put Things in Perspective Only one Comment
Unbelievable I guess the Old Saying a Picture is worth a thousand words
is True in this case
Don KA9QJG
Water running Causing lots of Damage
Just my Thoughts on the Subject
Happy Repeater Building
Don KA9QJG
That Picture give the Term Low Loss Coax a New meaning, what an idiot
who ever it was , Thanks for posting I would of not believed it had I
not seen the Pic
Happy Repeater Building
Don KA9QJG
and I grabbed the Box Full and never looked back USE Good Connectors
or You will pay for it later.
PS I Also have seen People who would Still stand there knowing they were
getting a Great deal and still try and get the Person to sell cheaper ,
Ha Ha
Don KA9QJG
Ted , in case You do not get any info on that Manual, I E-mailed
this Place for Mine and this was the Reply
Good Luck
Don KA9QJG
This was from the company below .
I have a Motorola R2001B Operation/Maintenance manual in stock for
RENTAL only
All manuals are complete and
Thanks to everyone for all the Helpful info; I have enough now to make a
intelligent Decision on how to approach the project
Thanks
Don KA9QJG
tripped over to Battery Power.
Go easy on the answers and especially the comments And I don't want to
hear any Locals in My area talking about Me on the air I will be
listening Ha Ha
Thanks Don KA9QJG
us Older Techs hate to admit our Limited ability's of Steady
Hands and good Eyes. And let the Pros on here do it .
Just a Satisfied Customer
73 Don KA9QJG
_._,___
The only Problem in Having the repeater builders Kevin and Scott Makes
it for You the way You want it , is When You get it back and put it at a
Site You never get to see it anymore it just keeps on working and
working well unless Mother Nature gets You
Don KA9QJG
__, This was real interesting and I wanted to share it , But a lot do
Not know how to convert it to English , and I don't know enough about
computers to Save it and then post the Converted URL If this is
Possible Please let Me know E-Mail direct if want
Thanks Don KA9QJG
_._,___
s can check it
out too and see.
Happy and Safe New Year to All
Don KA9QJG
I would still like His Job But I bet He has Few friends in that area
other then the ones He works for .
73 De Don KA9QJG _
needed to be touched for 20 Yrs . Just jerk them out and throw them in a
trunk of a New Vehicle.
Happy Holidays to All
Don KA9QJG
Roger, You can find the diagram of the cables here
http://www.batlabs.com/speccbl.html And probably on this Group , I was not
brave enough to try and make one and smoke My radio So I Bought one on
E-Bay .
Good Luck
Don KA9QJG
1 - 100 of 204 matches
Mail list logo