in. It does not matter if it has been
discussed with the board, or with most of the membership. The ENTIRE
membership must be notified 7 days prior to any decision. Any member in
good standing may make a proposal.
The continued disregard for well established protocols is troubling.
regards,
Andrew L
I have been reminded that at 21 W North we had 8 working desktop
computers. Are they buried? Or are we trying to restore every computer
shell in SynHak?
regards,
Andrew L
On Wed, Jun 18, 2014 at 7:25 PM, a l leit...@gmail.com wrote:
It might be helpful come tax season if we had either
1
I would be interest in doing this.
regards,
Andrew L
On Sat, Jun 21, 2014 at 1:52 PM, William Schaffer wschaff...@gmail.com
wrote:
Hi all,
I wanted to see if anyone is interested in holding a class some time this
summer in order to earn an FCC Amateur Radio License.
A Technician license
Are the board meeting minutes ever going to be made public? Every effort
should be made to make all meeting minutes public no later than the end of
business the next day.
Minutes aren't a news letter.
regards,
Andrew L
On Fri, Jun 6, 2014 at 3:41 PM, Steve Radonich IV nesfr...@outlook.com
wrote
factor $dd.cc
regards,
Andrew L
On Wed, Jun 18, 2014 at 8:38 AM, Justin Herman just...@gmail.com wrote:
These would be a great items to have. I would suggest getting a few
lowercost ($15-20) meters for non precision work.
BUT I cant support spending $ on anything until SynHak has approved
. If the one I recall was
on short term loan for build out I'd be happy to donate one.
regards,
Andrew L
On Wed, Jun 18, 2014 at 1:43 PM, William Schaffer wschaff...@gmail.com
wrote:
I'd love to see Synhak get a bench DMM.. But generally unless you buy a
really old one, they cost way over what's
It might be helpful come tax season if we had either
1) a pile of donation forms there since depending on the vintage HDDs are
worth $$
2) If we just had a big sheet for people to write their name and the serial
numbers of the HDDs they've donated.
regards,
Andrew L
On Wed, Jun 18, 2014 at 6:58
for easier project sharing too.
How will this affect our expenses/band width usage.
Let's just be sure to continue mailing out minutes and proposals.
Regards,
Andrew L
On Jun 15, 2014 10:05 AM, Michael Griesacker mgriesac...@gmail.com
wrote:
I think this is a good idea also
On Jun 14, 2014 10:08
the suspension or removal is
challenged.
a minor note, is the technical delay behind minutes distribution being
handled so it doesn't happen habitually?
regards,
Andrew L
On Thu, Jun 5, 2014 at 2:13 AM, Craig Bergdorf mm1...@gmail.com wrote:
--Meeting at 48 S Summit St on June 3rd 2014--
*Note
with it's use.
There's also the option of using one of the computers we have as a document
server.
regards,
Andrew L
On Wed, Jun 4, 2014 at 3:35 PM, Philip P. Patnode ppatn...@gmail.com
wrote:
Andrew,
I am going to use one of the existing SH logo files in the marketing
materials I am creating
the
misinformation.
regards,
Andrew L
On Thu, Jun 5, 2014 at 1:24 PM, Steve Radonich IV nesfr...@outlook.com
wrote:
I'll take a look at it
--- Original Message ---
From: Robert Rybicki rob...@robertrybicki.com
Sent: June 5, 2014 1:24 PM
To: SYN/HAK discussion list discuss@synhak.org
Subject
Sounds good to me Steve!
Is the synhak router still giving you problems?
Justin, my main concern was making sure proposals didn't get delayed due to
clerical errors causing failures to adhere to protocol. Having an informed
community is central to following our mission.
regards,
Andrew L
are finding solutions,
Andrew L
On Tue, Jun 3, 2014 at 11:34 AM, Philip P. Patnode ppatn...@gmail.com
wrote:
Justin,
Sometimes the mood of the email sender is not perceived accurately.
Please don't misconstrue my comments as being negative or interpret them
as a perceived slight against
pointed to are all we have.
thank you for your drive,
Andrew L
On Tue, Jun 3, 2014 at 9:40 AM, Philip P. Patnode ppatn...@gmail.com
wrote:
G
Yes, I know that the 1024 file will work.
The problem is not limited to the clipped image logo on the flyer.
A casual search of the Documents shows
Hackerspaces.org is currently updated. I removed or modified some of the
comments depending on how inflammatory or useful they were. To edit you
need to create an account and answer a 'prove you're human question'
regards,
Andrew L
On Mon, Jun 2, 2014 at 3:32 PM, gs volt gsvo...@gmail.com wrote
of the Gingery and Lindsay Books on aluminum casting I'll
bring to tonight's meeting so you can look them over Philip. As a side
note, why not just use steel plate machined to shape for your triggers?
Should be something do able with a bandsaw and some creative dremeling.
regards,
Andrew L
On Tue
I've melted a quarter pound of aluminum in an insulated wash tub with
On May 27, 2014 4:05 PM, dave walton walton.d...@gmail.com wrote:
We have a local source of mixed aluminum shavings (several alloys - mostly
6061) coming from a CNC machine for ~$0.50/lb. They tend to still be a bit
damp
= Agenda =
* '''Note Taker:''' Andrew L
* '''Moderator:''' Becca
== Introduction and Names ==
* Andy – Killed mother nature to build fancy DDR pads
* Philip – Bicycles, photography, and ocassionally computers
* Gene – first time here, wants to see what we’re about
** Heard about us
stupid phone, tried to delete the message and hit send instead. Sorry for
the suspense! hopefully the other thread answers the questions.
regards,
Andrew L
On Tue, May 27, 2014 at 5:37 PM, Philip P. Patnode ppatn...@gmail.comwrote:
Too late - I already fell off
On Tue, May 27, 2014
neighbors and online community to
contribute to our mission of furthering art, technology, science, and
providing a safe place to mentor these fields.
regards,
Andrew L
On Thu, May 22, 2014 at 8:03 AM, Michael Griesacker
mgriesac...@gmail.comwrote:
Philip, I didn't think the discussion last
phongTemplate
{{Infobox_meeting
|time=7PM
|date=$date
|venue=48 South Summit
|next=$next
|previous=$previous
}}
= Agenda =
* '''Note Taker:''' Andrew L
* '''Moderator:''' Devin
== Introduction and Names ==
* Philip - Does bicycles, and various other things
* Craig - works
* Will - Needs a job
I'll second Philip
regards,
Andrew L
On Wed, May 14, 2014 at 11:16 PM, Devin Wolfe degerov...@yahoo.com wrote:
I am calling a board meeting for Monday may 19th, at 6:00 pm to be held at
48 S.Summit st. This will occur just before the Community working group
meeting.
The agenda
consensus
rather than voting.
There does need to be a clear and simple way to prevent filibustering and
petty blocking. Except for filibustering I do not see voting solving the
problems you have outlined.
regards,
Andrew L
On Thu, May 15, 2014 at 12:43 AM, Andrew Buczko a4s...@dsprototyping.comwrote
Here's the minutes so no one has to download them to read.
Moderator: Becca Salchak
Note Taker: Steve Radonich IV
Introductions:
Andy - Electronic Tech
G - Organize civic hacking events
Andrew - student
Mike - Motorola Maxx doesn't float
Justin - eat delicious stew
AJ9 - fix things
Philip -
This discussion is not productive towards collaboration and mending of
wounds. Knock it off.
regards,
Andrew L
On Thu, May 15, 2014 at 12:24 AM, Andrew Buczko a4s...@dsprototyping.comwrote:
Also will block
Alex is right Torrie you are the only one that is causing arguments.
On Wed, May 14
in dispute with Torrie.
Keep in mind whatever actions are taken set the precedent for our conduct.
I think that the CWG deserves a chance at this.
http://static.synhak.org/documents/bylaws.pdf
regards,
Andrew L
On Wed, May 14, 2014 at 10:23 PM, Philip P. Patnode ppatn...@gmail.comwrote:
Steve,
I
on it.
That is all assuming it was not announced anywhere on either discuss@ or
members@. If it was in fact announced somewhere there will be no need to
revote.
Again apologies that a mix up on our side created confusion and uncertainty
on yours.
regards,
Andrew L
On Tue, May 13, 2014 at 5:38 PM, William
,
Andrew L
On Fri, May 9, 2014 at 10:05 PM, Craig Bergdorf mm1...@gmail.com wrote:
I was at both meetings and can say with certainty it was brought up at the
meeting properly, if it was documented properly or not I don't know. He
is new to us, and came to us in a time of different people doing
/Proposals/Approved
^ https://synhak.org/wiki/Meetings/2013-01-22
regards,
Andrew L
On Fri, May 9, 2014 at 2:32 PM, Justin Herman just...@gmail.com wrote:
Just a point of reflection. I have been to MANY nonprofit and committee
meetings and NOT ONE have had as detailed notes that SynHak has
,
Andrew L
On Fri, May 9, 2014 at 1:11 PM, Alexander Golightley
coinspel...@gmail.comwrote:
This is how I would ideally see the CWG
1.) A member addresses a personal issue with another member. They feel
more comfortable to discuss this with moderation or they feel their
previous attempts
that need addressing.
Once again please read and provide input on the community working group
proposal if you note any deficiencies.
regards,
Andrew L
On Wed, May 7, 2014 at 8:59 PM, Steve Radonich IV nesfr...@outlook.comwrote:
The meeting minutes were posted to the wiki but isn't showing up
to institute punitive measures, which the CWG(as written) has no
authority to enforce. If there are flaws in the logic of the proposal, or
oversights I don't see why we can't talk about them here and at a meeting
solely with the intent of polishing the idea.
regards,
Andrew L
On Sat, May 3, 2014 at 1:26
is not intended to dispense punitive measures.
regards,
Andrew L
On Sun, May 4, 2014 at 3:54 PM, Steve Radonich IV nesfr...@outlook.comwrote:
So just so I understand this correctly. Are you saying we should ignore
when people hack things that are labeled do not hack? I mean I don't think
we
Craig: I think Torrie was commenting about how our current front door
doesn't allow for a magnetic strike plate to easily be implemented and the
Land Lord has requested we not modify it since it is a nice sales feature
to have a big heavy near bullet-proof entry door.
regards,
Andrew L
On Sat
Has anyone else got any input? It would be helpful if we got some feedback
before the meeting so we can polish out any oversights and get this
implemented on the 13th.
regards,
Andrew L
On Thu, May 1, 2014 at 1:33 AM, Torrie Fischer tdfisc...@hackerbots.netwrote:
Seconded, for whatever
They are leftovers from our Learn to Solder demos at the Akron
Mini-MakerFaire. I'm sure we'll keep using them for demos but feel free to
hone your skills!
regards,
Andrew L
On Fri, May 2, 2014 at 8:18 PM, Robert Rybicki rob...@robertrybicki.comwrote:
Have at it. Synhak takes donations
As far as I know they are in the proverbial 'box somewhere' I'd start
looking near the EE lab and then expand rescue efforts to the basement if
you still have trouble.
regards,
Andrew L
On Fri, May 2, 2014 at 8:43 PM, William Schaffer wschaff...@gmail.comwrote:
Also guys, I hooked
used? We have a history of
poor communication.
regards,
Andrew L
On Fri, May 2, 2014 at 8:37 AM, Philip P. Patnode ppatn...@gmail.comwrote:
Craig,
Add me to the list.
I will be happy to help in any way I can.
A good plan and a project leader will be an effective solution to the
chaos now
Any thoughts on how to implement this?
Regards,
Andrew L
On May 1, 2014 10:05 AM, Martin Pinkston martinpinks...@gmail.com wrote:
Having observed Synhak over the past 6 months, I too have witnessed the
infectious nature and spread of the poison which now spills out all
Synhak's pores
Regardless of the intended viewer intentional improper use of pronouns and
various other inflammatory comments about a persons life style are not ok.
Part of being excellent to each other is being respectful while
disagreeing with a persons actions.
Regards,
Andrew L
On May 1, 2014 3:51 AM
Due to website/browser conflicts we were unable to edit the wiki last
night. Could the note taker(Steve) please respond to this email with the
minutes.
Regards,
Andrew L
___
Discuss mailing list
Discuss@synhak.org
https://synhak.org/mailman/listinfo
to the detriment of SynHak in some
way that I am not aware.
regards, Andrew L
On Apr 30, 2014 9:34 AM, Chris Egeland ch...@chrisegeland.com wrote:
As I was not present at the meeting, and the minutes from said meeting
have not been posted, could you please explain the reasoning of this
proposal
doesn't deliver results over night.
I would appreciate it if you could be constructive in addressing your
concerns rather than throwing gas on the fire.
If you are uncomfortable addressing them in public, you have my email
address.
Regards,
Andrew L
On Apr 30, 2014 12:49 PM, Torrie Fischer tdfisc
is going on.
I try not to make assumptions about the actions of others I would
appreciate the same courtesy.
Regards,
Andrew L
On Apr 30, 2014 3:28 PM, a l leit...@gmail.com wrote:
There hasn't been much discussion about the CWG lately but that does not
by any means mean we, or at least I, don't
they
have first consideration. If they cannot be resolved civilly,
recommendations will be made to the membership.
Regards,
Andrew L
On Apr 30, 2014 3:51 PM, Steve Radonich IV nesfr...@outlook.com wrote:
I feel that I have to reply to this as I was specifically named.
One I have to say
waiver to double check.
Please keep discussion constructive towards the proposal.
Regards,
Andrew L
On Apr 30, 2014 4:14 PM, Steve Radonich IV nesfr...@outlook.com wrote:
If you read the e-mail Torrie you would know that I am not in support of
this proposal, but was in fact one that you made
As some of us are trying to make SynHak something to recommend to friends
and family. Anything constructive to add to the conversation?
Regards,
Andrew L
On Apr 30, 2014 6:40 PM, Byron Moran byrondmo...@gmail.com wrote:
Totally agree. I certainly wouldn't join or advocate whatever this place
vague so as to protect sensitive topics.
Please give constructive feedback. It is painfully obvious that we need
some agreeable way to help people communicate their concerns to each other.
in excellence,
Andrew L
___
Discuss mailing list
Discuss@synhak.org
minutes especially since we operate on a
mailing list or it didn't happen basis.
regards,
Andrew L
On Fri, Apr 25, 2014 at 4:14 PM, Philip P. Patnode ppatn...@gmail.comwrote:
TWIMC at SH,
Since I have been isolated on my private island for the past week or so, I
may have missed some
,
Andrew L
On Fri, Apr 25, 2014 at 9:15 PM, Philip P. Patnode ppatn...@gmail.comwrote:
Becca,
Thank you!
I will ponder the details and ramifications of the proposed proposal and
submit it in writing within 24 hours.
Of course, I will add at least three good reasons for the membership
No one has any input on my suggestions?
Regards,
Andrew L
On Apr 16, 2014 6:52 PM, a l leit...@gmail.com wrote:
This seems like two unrelated proposals: Family dues discounts and Key
access to minors. Perhaps I just misinterpreted formatting.
I couldn't organize my words to reflect my
Where are the minutes?
-Andrew L
On Apr 23, 2014 8:34 AM, Phong ph...@synhak.org wrote:
こんにちは, hakkers!
I've noticed that there was a meeting on 2014-04-22 and that the minutes
are posted. They are visible on the web at
https://synhak.org/wiki/Meetings/2014-4-22. I've also included them
deadline?
* Do we hand people a check for $150 or refund reciepts?
* It sounds like this is open to the public, how do we best promote this?
regards,
Andrew L
On Wed, Apr 23, 2014 at 10:18 AM, Omar Rassi omar.ra...@gmail.com wrote:
Regarding the hacker grants proposal, I have a question
/Community_working_group
http://ev.kde.org/workinggroups/cwg.php
https://www.acrnet.org/
this affects us all please give your input.
in excellence,
Andrew L
___
Discuss mailing list
Discuss@synhak.org
https://synhak.org/mailman/listinfo/discuss
in outreach to
young hackers and I don't want a feeling of second class membership to
stand in the way of their hacking.
regards,
Andrew L
On Wed, Apr 16, 2014 at 4:17 PM, Torrie Fischer tdfisc...@hackerbots.netwrote:
As promised, here's the full proposal we decided on last night:
8
to attract new members if we're
having trouble getting along with ourselves?
regards,
Andrew L
On Mon, Apr 14, 2014 at 11:51 AM, Torrie Fischer
tdfisc...@hackerbots.netwrote:
On Monday, April 14, 2014 08:46:00 Devin Wolfe wrote:
So I have been watching this and I have a question.
What exactly
it is a conflict of
interest to have a close friend be the mediator in matters such as these.
please refrain from further discussion of private matters on a public forum.
-Andrew L
On Mon, Apr 14, 2014 at 5:46 PM, Omar Rassi omar.ra...@gmail.com wrote:
Devin,
Our response to Andy's complaint
,
Andrew L
On Sat, Apr 12, 2014 at 2:02 PM, Michael Griesacker
mgriesac...@gmail.comwrote:
Rob, I will try to be brief. The discussion brought up some concerns, and
the topic of discussion was member/family pricing. As an aside, we
discussed our current rules concerning keys: Non-members
is the subject of the issue?
regards,
Andrew L
regards,
Andrew
On Sat, Apr 12, 2014 at 1:29 PM, Torrie Fischer tdfisc...@hackerbots.netwrote:
On Saturday, April 12, 2014 12:10:50 Becca Salchak wrote:
I agree that removal is inappropriate .I also think that mediation
between
you ,Andy
is not what is meant then what ought to be done remains
undone -Confucious
regards,
Andrew L
On Sun, Apr 13, 2014 at 7:08 PM, Torrie Fischer tdfisc...@hackerbots.netwrote:
On Sunday, April 13, 2014 15:25:27 Becca Salchak wrote:
My issue with dealing with it over email is:
-yes people tend
all the data are recorded.
Regards,
Andrew L
On Apr 10, 2014 2:29 PM, Omar Rassi omar.ra...@gmail.com wrote:
That sounds a lot like a log sheet. The card could be kept in a locked
cabinet keyed to the front door. This is so that any keyholder can open it
for a member instead having to rely
might as well sign me up too
thanks,
Andrew L
On Sat, Apr 5, 2014 at 11:29 AM, Torrie Fischer tdfisc...@hackerbots.netwrote:
On Saturday, April 05, 2014 08:22:48 alex kot wrote:
Torrie is this a paid service?
It can be, but we're on the free plan which has no limits on time or
number
dismantling the cabinet.
-Andrew L
On Sat, Apr 5, 2014 at 7:15 PM, Omar Rassi omar.ra...@gmail.com wrote:
MOAR SWAG! Those bracelets were amazing and I love my Synhak T-Shirt.
Awesome job you two on helping Synhak help us help you help us all!
On Sat, Apr 5, 2014 at 6:49 PM, Torrie Fischer
tdfisc
(had?) reseller status at Sparkfun so, I believe, we pay
wholesale on things. Retail is a mild complication come tax time for SynHak
but it is allowed under the law.
regards,
Andrew L
On Sat, Apr 5, 2014 at 7:21 PM, Torrie Fischer tdfisc...@hackerbots.netwrote:
On Saturday, April 05, 2014 19:13
the insanely curious will attempt to access the drawer with the
confidential forms, that may or may not be in there.
Maybe Torrie will move the drawer with the keyed lock to the top position
to keep it from being tampered with or opened by nosy people.
Philip
On Sat, Apr 5, 2014 at 7:57 PM, a l
Sounds like we should have some art for folks to look at.
Maybe once the kiln gets hooked up and we get some experience with it we
could do some demo's or short 'kits' with people.
We should also thank the artspace for the promo
regards,
Andrew L
On Sat, Apr 5, 2014 at 7:58 PM, Philip P
://www.youtube.com/watch?v=5DmYLrxR0Y8feature=youtube_gdata_player
Regards,
Andrew L
On Apr 4, 2014 9:08 AM, Torrie Fischer tdfisc...@hackerbots.net wrote:
On Friday, April 04, 2014 03:55:47 Andrew Buczko wrote:
Torrie, That is not a massive lathe
and for you to suggest getting rid
.
Regards,
Andrew L
On Apr 4, 2014 2:11 PM, Torrie Fischer tdfisc...@hackerbots.net wrote:
On Friday, April 04, 2014 10:56:23 alex kot wrote:
I am just surprised torrie suggested slack as an option.
SYNHAK has problems.
They need fixed.
I don't care what technology fixes SYNHAK.
Can you
not going to tell you how to allocate your property buy I
would remind you, our goal is to provide infrastructure to the public at
large, not just our members.
I look forward to seeing you at the space some day.
Tom, a shop bot is a brand of cnc router.
regards,
Andrew L
On Apr 3, 2014 1:06 PM
suggest buying a kit for the bearings and rails since a bunch of the plans
for sale rely on u bolts and emt conduit which may not hold tolerances if
someone is ripping the length of a sheet of plywood.
Regards,
Andrew L
On Apr 2, 2014 12:19 AM, Torrie Fischer tdfisc...@hackerbots.net wrote
If we could keep discussion limited to the wording of the proposal at hand
rather than whether sex = gender, white vs wheat, chocolate vs vanilla, or
which side it's proper to butter your toast on that would be great.
regards,
Andrew L
On Wed, Apr 2, 2014 at 12:08 PM, Steve Radonich IV nesfr
with and capable of using a regular circular saw instead of
some
big-ass piece of equipment. Not having one isn't a problem for me, and
having
one would only be a minor benefit to me.
Chris
On 4/2/2014 1:58 PM, a l wrote:
This isn't a proposal yet. Just further discussion on an Item
extrusion
1010x60 $15.75 + $21.30 S/H
High cycle double flange linear bearing 40S 40-3834 $20.99+$12.25 S/H
T-Slot Aluminum Linear Bearing 15 Series 6815 $35.72+$11.78 S/H
1030x72 T-Slot $23.76+$22.96 S/H
Ebay 8020inc
If you aren't aware part numbers are in the format of LlWw where L and W
represent
Sorry for the bold, my browser was freaking out while I composed that.
Ugh
regards,
Andrew L
On Tue, Apr 1, 2014 at 9:08 PM, a l leit...@gmail.com wrote:
*I realize you want to streamline how things operate at SynHak, and I
encourage that. However there is already a separate discuss thread
.
happy hacking!
Andrew L
___
Discuss mailing list
Discuss@synhak.org
https://synhak.org/mailman/listinfo/discuss
be sure to label things if you leave them at the space. Since
GARC will be meeting regularly at SynHak we do offer member storage
solutions ranging from a small tool box to a large rubbermaid tub, for a
fee. Contact the Treasurer for pricing.
regards,
Andrew L
On Mon, Mar 24, 2014 at 7:56 AM
for the purpose since then.
I assumed that you guys had figured it out while I was in California.
regards,
Andrew
On Mon, Mar 24, 2014 at 9:06 AM, Torrie Fischer tdfisc...@hackerbots.netwrote:
On Monday, March 24, 2014 08:43:44 a l wrote:
Rrix, Those look great and a bunch cheaper. I'm sure there's
.
regards,
Andrew L
On Mon, Mar 24, 2014 at 10:30 AM, Michael Griesacker
mgriesac...@gmail.comwrote:
pricing chart is on the wiki, not sure if this is what you are asking
https://synhak.org/wiki/Membership
since I remember you mentioning that there is no difference in member
pricing
which wording
is from what post.
regards,
Andrew L
___
Discuss mailing list
Discuss@synhak.org
https://synhak.org/mailman/listinfo/discuss
Hello all,
As most of you know we have the policy that you can hack things in the
space that aren't labeled 'do not hack'. Which is just about everything.
There've been a few instances of people not seeing or ignoring 'Do Not
Hack' Labels but by and large the system works. To help insure that the
I'm not sure we need this, but if it does get created perhaps
bureaucracy@could be sent to discuss weekly in digest form so people
aren't out of the
loop but don't have to deal with hourly emails.
Regards,
Andrew l
On Mar 20, 2014 3:26 PM, alex kot alexk...@yahoo.com wrote:
Build, bizops
I'm not sure what scenario you're wishing to compare your hypothetical
situation to.
I misread another post. That was quite non sequiter. Whoops!
regards,
Andrew L
On Thu, Mar 20, 2014 at 5:13 PM, Seeley, Tim (PSA-Akron)
tim.see...@psangelus.com wrote:
So the story goes that this young
.
regards,
Andrew L
On Thu, Mar 20, 2014 at 7:20 AM, Torrie Fischer tdfisc...@hackerbots.netwrote:
On Thursday, March 20, 2014 03:28:21 Andrew Buczko wrote:
feel ?
It's a system, you use it to make decisions.
1 an proposal is brought up.
2 we talk on it / make changes / corrections.
3 we
,
Andrew L
On Mar 19, 2014 1:24 AM, Andrew Buczko a4s...@dsprototyping.com wrote:
I do not see consensus working as the group grows larger, we need to vote
and be done with the mater at hand.
We can always write new proposals to deal with changes that come in the
future.
On Wed, Mar 19, 2014
Surely*, we surely need to address...
Sorry for the double post,
Andrew L
On Mar 19, 2014 2:06 AM, a l leit...@gmail.com wrote:
We secondly need to address the scaling issues but if we're constantly
proposing amendments to proposals when do we get to hack? Conversely if
we're always trying
Devin blocked this at the meeting, after 3 hours of arguments. Justin wants
to discuss in physical form and disagrees with the consensus. Others also
agree.
On Tue, Mar 18, 2014 at 1:01 AM, Omar Rassi omar.ra...@gmail.com wrote:
Andy, in answer to your questions by how other companies do it,
If outs short run/low volume I can show you how to bind them yourself.
Regards,
Andrew L
On Mar 17, 2014 9:56 AM, gs volt gsvo...@gmail.com wrote:
Does anyone know of any childrens book publishers/printers in
Akron/Cleveland?
Where children's book is 10 width by 8height with 20-35 pages
and ideas mesh with
everyone else's.
Though you bring a up a good point, before people propose dispensation of
grant money they should be able to describe the direct benefit to the
community ie; supplies for a class, grants for students, research into a
socially relevant field.
regards,
Andrew L
for the french cleats this
week. If I have time I might even get the studs set up. Properly mounted
each cleat should be able to hold +80 lbs. I'd recommend using angled
supports for anything that sticks out more than 10 inches.
regards,
Andrew L
On Sat, Mar 15, 2014 at 3:40 PM, Martha Geroch mger
Terribly sorry about the misspelling Philip! You're right to correct
people. especially since were voting on your membership.
Regards,
Andrew L
On Mar 13, 2014 8:23 AM, Philip P. Patnode ppatn...@gmail.com wrote:
Torrie,
Thanks for the compliment!
It is the first time in my life
/eotopicb80.pdf
which I am skimming since it's lengthy, more historical, and I have time
sensitive school things I also need to be doing
regards,
Andrew L
On Thu, Mar 13, 2014 at 7:25 PM, Andrew Buczko a4s...@dsprototyping.comwrote:
Yeah, great idea. Devin and Craig had some ideas for making
) so at this point I give the floor to Philip and anyone with
questions for him. If any of that was misinformed please correct me.
in excellence,
Andrew L
___
Discuss mailing list
Discuss@synhak.org
https://synhak.org/mailman/listinfo/discuss
I'm fairly certain this proposal is in response of the recent unilateral
censorship of discuss@ and perhaps subsequent complacency by those who
currently have the requested privileges.
Regards,
Andrew L
On Mar 12, 2014 1:26 AM, Chris Egeland ch...@chrisegeland.com wrote:
Justin,
In order
does this further our mission or
aid our community.
regards,
Andrew L
On Thu, Mar 6, 2014 at 6:00 PM, dave walton walton.d...@gmail.com wrote:
The basic business model of the Columbus Idea Foundry is to rent workspace
to it's members. There are several artists - watercolor and oil painters
Thanks for the relevant sources and calm voicing of concerns. To this end:
Just because things require taxing does not mean we cannot conduct them. We
would just need to weigh the benefits and time involved.
Regards,
Andrew L
On Mar 5, 2014 9:24 AM, Justin Herman just...@gmail.com wrote:
Also
in as much as 'open houses'.
Regards,
Andrew L
On Mar 5, 2014 1:32 AM, Becca Salchak rlsalc...@gmail.com wrote:
Thank you Craig if only we could get the rest of the membership excited
about it
On Wednesday, March 5, 2014, Craig Bergdorf mm1...@gmail.com wrote:
And it's a unique, promotable
I too attempted to sign onto this news letter with the intent on
contributing as well as fact and spell checking.
Regards,
Andrew L
On Mar 4, 2014 6:01 PM, Torrie Fischer tdfisc...@hackerbots.net wrote:
On Tuesday, March 04, 2014 16:52:24 Justin Herman wrote:
I posted the 2nd newsletter today
We could also implement a drawer based system similar to the Lehigh
hackerspace
http://hackaday.com/2013/03/19/hackerspace-intro-make-lehigh-valley/
On Mon, Mar 3, 2014 at 8:08 AM, Philip P. Patnode ppatn...@gmail.comwrote:
FYI
Any decent size restaurant or caterer uses and discards more
.
regards,
Andrew L
On Mon, Mar 3, 2014 at 3:23 PM, Torrie Fischer tdfisc...@hackerbots.netwrote:
On Monday, March 03, 2014 14:16:14 Craig Bergdorf wrote:
Justin: linking to the collective via vpn has been on my todo list for 6
months now. I'm waiting on a discussion on our ISP. Considering it's
to
the space. Perhaps I underestimate the draw of a completely arbitrary
title.
Since it doesn't really change much I have no reason to block it though.
regards,
Andrew L
On Mon, Mar 3, 2014 at 2:12 PM, Torrie Fischer tdfisc...@hackerbots.netwrote:
No discussion on a mechanism that has
1 - 100 of 169 matches
Mail list logo
